Ultrafast electron dynamics in excited states of conjugated thiophene-fluorene organic polymer (pF8T2) thin films

The electronic states of poly(9,9-dioctylfluorenyl-alt-bithiophene) pF8T2 on H/Si(100) substrates, prototypical for organic photovoltaics, were investigated by ultrafast photoelectron spectroscopy and by time-resolved fluorescence studies. Occupied and unoccupied electronic states were analysed by ultraviolet photoelectron spectroscopy (UPS), static and dynamic femtosecond two-photon photoemission (2PPE), and time-correlated single photon counting (TCSPC). Time-resolved measurements allow assessment of population lifetimes of intermediate states. The combination of time-resolved photoelectron spectroscopy and fluorescence excitation allows following the electronic dynamics in excited states from the femtosecond to the nanosecond time scale. For this prototypical material the electron kinetic energy resolved lifetimes range from about a few tens of femtoseconds up to hundreds of picoseconds. After annealing these types of organic thin films the efficiency of organic solar cells usually increases. We show that annealing does not influence the initial ultrafast charge generation processes, but the long-lived states. However, the nanosecond scale fluorescence lifetimes measured by TCSPC are prolonged after annealing, which therefore is identified as the cause of a greater exciton diffusion range and thus is beneficial for charge carrier extraction.

Mixed-Dimensional Nanoparticle-Nanowire Channels for Flexible Optoelectronic Artificial Synapse with Enhanced Photoelectric Response and Asymmetric Bidirectional Plasticity

A mixed-dimensional dual-channel synaptic transistor composed of inorganic nanoparticles and organic nanowires was fabricated to expand the photoelectric gain range. The device can actualize the sensitization features of the nociceptor and shows improved responsiveness to visible light. Under electrical pulses with different polarities, the apparatus exhibits reconfigurable asymmetric bidirectional plasticity. Moreover, the devices demonstrate good operational tolerance and mechanical stability, retaining more than 60% of their maximum responsiveness after 100 consecutive/bidirectional and 1000 flex/flat operations. The improved photoelectric response of the device endows a high image recognition accuracy of greater than 80%. Asymmetric bidirectional plasticity is used as punishment/reward in a psychological experiment to emulate the improvement of learning motivation and enables real-time forward and backward deflection (+7 and -25°) of artificial muscle. The mixed-dimensional optoelectronic artificial synapses with switchable behavior and electron/hole transport type have important prospects for neuromorphic processing and artificial somatosensory nerves.

Directed Gradients in the Excited-State Energy Landscape of Poly(3-hexylthiophene) Nanofibers

Funneling excitation energy toward lower energy excited states is a key concept in photosynthesis, which is often realized with at most two chemically different types of pigment molecules. However, current synthetic approaches to establish energy funnels, or gradients, typically rely on Förster-type energy-transfer cascades along many chemically different molecules. Here, we demonstrate an elegant concept for a gradient in the excited-state energy landscape along micrometer-long supramolecular nanofibers based on the conjugated polymer poly(3-hexylthiophene), P3HT, as the single component. Precisely aligned P3HT nanofibers within a supramolecular superstructure are prepared by solution processing involving an efficient supramolecular nucleating agent. Employing hyperspectral imaging, we find that the lowest-energy exciton band edge continuously shifts to lower energies along the nanofibers' growth direction. We attribute this directed excited-state energy gradient to defect fractionation during nanofiber growth. Our concept provides guidelines for the design of supramolecular structures with an intrinsic energy gradient for nanophotonic applications.

Kelvin Probe Microscopy Investigation of Poly-Octylthiophene Aggregates

Conductive polymers have fundamental relevance as well as novel technological applications in the organic optoelectronics field. Their photophysical and transport properties strongly depend on the molecular arrangement, and nanoscale characterization is needed to fully understand the optoelectronic processes taking place in organic devices. In this work, we study the electrostatic properties of poly-3-octylthiophene isolated structures: disordered low-packed polymer chains and crystalline layered lamellar assemblies. We characterize the electronic ground state using Kelvin probe microscopy. This allows us to resolve a rich variety of surface potential regions that emerge over the different polymer structures. These SP regions are correlated with different molecular aggregates.

Disorder in P3HT Nanoparticles Probed by Optical Spectroscopy on P3HT-b-PEG Micelles

We employ photoluminescence (PL) spectroscopy on individual nanoscale aggregates of the conjugated polymer poly(3-hexylthiophene), P3HT, at room temperature (RT) and at low temperature (LT) (1.5 K), to unravel different levels of structural and electronic disorder within P3HT nanoparticles. The aggregates are prepared by self-assembly of the block copolymer P3HT-block-poly(ethylene glycol) (P3HT-b-PEG) into micelles, with the P3HT aggregates constituting the micelles' core. Irrespective of temperature, we find from the intensity ratio between the 0-1 and 0-0 peaks in the PL spectra that the P3HT aggregates are of H-type nature, as expected from π-stacked conjugated thiophene backbones. Moreover, the distributions of the PL peak ratios demonstrate a large variation of disorder between micelles (inter-aggregate disorder) and within individual aggregates (intra-aggregate disorder). Upon cooling from RT to LT, the PL spectra red-shift by 550 cm^-1, and the energy of the (effective) carbon-bond stretch mode is reduced by 100 cm^-1. These spectral changes indicate that the P3HT backbone in the P3HT-b-PEG copolymer does not fully planarize before aggregation at RT and that upon cooling, partial planarization occurs. This intra-chain torsional disorder is ultimately responsible for the intra- and inter-aggregate disorder. These findings are supported by temperature-dependent absorption spectra on thin P3HT films. The interplay between intra-chain, intra-aggregate, and inter-aggregate disorder is key for the bulk photophysical properties of nanoparticles based on conjugated polymers, for example, in hierarchical (super-) structures. Ultimately, these properties determine the usefulness of such structures in hybrid organic-inorganic materials, for example, in (bio-)sensing and optoelectronics applications.

Hybrid conjugated polymer/magnetic nanoparticle composite nanofibers through cooperative non-covalent interactions

Hybrid organic-inorganic composites possessing both electronic and magnetic properties are promising materials for a wide range of applications. Controlled and ordered arrangement of the organic and inorganic components is key for synergistic cooperation toward desired functions. In this work, we report the self-assemblies of core-shell composite nanofibers from conjugated block copolymers and magnetic nanoparticles through the cooperation of orthogonal non-covalent interactions. We show that well-defined core-shell conjugated polymer nanofibers can be obtained through solvent induced self-assembly and polymer crystallization, while hydroxy and pyridine functional groups located at the shell of nanofibers can immobilize magnetic nanoparticles via hydrogen bonding and coordination interactions. These precisely arranged nanostructures possess electronic properties intrinsic to the polymers and are simultaneously responsive to external magnetic fields. We applied these composite nanofibers in organic solar cells and found that these non-covalent interactions led to controlled thin film morphologies containing uniformly dispersed nanoparticles, although high loadings of these inorganic components negatively impact device performance. Our methodology is general and can be utilized to control the spatial distribution of functionalized organic/inorganic building blocks, and the magnetic responsiveness and optoelectronic activities of these nanostructures may lead to new opportunities in energy and electronic applications.

Can Ferroelectricity Improve Organic Solar Cells?

Blends of semiconducting (SC) and ferroelectric (FE) polymers have been proposed for applications in resistive memories and organic photovoltaics (OPV). For OPV, the rationale is that the local electric field associated with the dipoles in a blend could aid exciton dissociation, thus improving power conversion efficiency. However, FE polymers either require solvents or processing steps that are incompatible with those required for SC polymers. To overcome this limitation, SC (poly(3-hexylthiophene)) and FE (poly(vinylidene fluoride-trifluoroethylene)) components are incorporated into a block copolymer and thus a path to a facile fabrication of smooth thin films from suitably chosen solvents is achieved. In this work, the photophysical properties and device performance of organic solar cells containing the aforementioned block copolymer consisting of poly(vinylidene fluoride-trifluoroethylene): P(VDF-TrFE), poly(3-hexylthiophene): P3HT and the electron acceptor phenyl-C₆₁ -butyric acid methyl ester: [60]PCBM are explored. A decrease in photovoltaic performance is observed in blends of the copolymer with P3HT:[60]PCBM, which is attributed to a less favorable nanomorphology upon addition of the copolymer. The role of lithium fluoride (the cathode modification layer) is also clarified in devices containing the copolymer, and it is demonstrated that ferroelectric compensation prevents the ferroelectricity of the copolymer from improving photovoltaic performance in SC-FE blends.

Resolving population dynamics and interactions of multiple triplet excitons one molecule at a time

Resolving the population dynamics of multiple triplet excitons on time scales comparable to their lifetimes is a key challenge for multiexciton harvesting strategies, such as singlet fission. We show that this information can be obtained from fluorescence quenching dynamics and stochastic kinetic modeling simulations of single nanoparticles comprising self-assembled aggregated chains of poly(3-hexylthiophene) (P3HT). These multichromophoric structures exhibit the elusive J-aggregate type excitonic coupling leading to delocalized intrachain excitons that undergo facile triplet formation mediated by interchain charge transfer states. We propose that P3HT J-aggregates can serve as a useful testbed for elucidating the presence of multiple triplets and understanding factors governing their interactions over a broad range of time scales. Stochastic kinetic modeling is then used to simulate discrete population dynamics and estimate higher order rate constants associated with triplet-triplet and singlet-triplet annihilation. Together with the quasi-CW nature of the experiment, the model reveals the expected amounts of triplets at equilibrium per molecule. Our approach is also amenable to a variety of other systems, e.g., singlet fission active molecular arrays, and can potentially inform design and optimization strategies to improve triplet harvesting yields.

Thermal Fluctuations Lead to Cumulative Disorder and Enhance Charge Transport in Conjugated Polymers

All conjugated polymers examined to date exhibit significant cumulative lattice disorder, although the origin of this disorder remains unclear. Using atomistic molecular dynamics (MD) simulations, the detailed structures for single crystals of a commonly studied conjugated polymer, poly(3-hexylthiophene-2,5-diyl) (P3HT) are obtained. It is shown that thermal fluctuations of thiophene rings lead to cumulative disorder of the lattice with an effective paracrystallinity of about 0.05 in the π-π stacking direction. The thermal-fluctuation-induced lattice disorder can in turn limit the apparent coherence length that can be observed in diffraction experiments. Calculating mobilities from simulated crystal structures demonstrates that thermal-fluctuation-induced lattice disorder even enhances charge transport in P3HT. The mean inter-chain charge transfer integral is enhanced with increasing cumulative lattice disorder, which in turn leads to pathways for fast charge transport through crystals.

Energetics and Escape of Interchain-Delocalized Ion Pairs in Nonpolar Media

The electron acceptor F4TCNQ p-dopes aggregates "nanowires" of poly(3-hexylthiophene) in nonpolar solvents but does not dope unaggregated chains. The standard free energy change for the charge transfer to form an ion pair is ΔG°_et = -0.21 eV. The dissociation constant to produce free ions in toluene by DC conductivity is K°_d = 1 × 10^-8 ± 50% (ΔG°_d = 0.48 ± 0.05 eV). This remarkably large K°_d , for ions in such a low polarity medium, may reflect interchain delocalization of the hole. The particular characteristics of this material system enables determination of both ΔG°_et and ΔG°_d , to find the overall free energy change from the two neutral species to completely separated ions in nonpolar media. It is endergonic by +0.27 ± 0.05 eV in contrast to -0.6 eV estimated from reported HOMO LUMO differences, illustrating the challenges that persist in determining such energetics. Steady state microwave conductivity experiments on doped aggregates confirm that holes in the aggregates cannot easily escape their dopant counterion, but at higher dopant concentrations, holes become mobile. These results provide insight into the mechanisms of charge separation involving intermolecularly delocalized charges in nonpolar media, an integral process in organic photovoltaic devices and doped molecular films.

Unravelling the enigma of ultrafast excited state relaxation in non-emissive aggregating conjugated polymers

We investigate a class of non-emissive conjugated polymers with very short excited state lifetimes believed to undergo singlet fission and relaxation to mid-gap forbidden excited states. Poly(3-decylthieneylenvinylene) (P3DTV) and its heavy atom analog, poly(3-decylseleneylenvinylene) (P3DSV), are strongly aggregating conjugated polymers that experience large excited state displacements along multiple vibrational modes. We demonstrate this Franck-Condon vibrational activity effectively disperses excitation energy into multiple non-radiative channels that can be explained using a simple, two-state potential energy surface model. Resonance Raman spectroscopy is sensitive to early Franck-Condon vibrational activity and we observe rich harmonic progressions involving multiple high frequency CC backbone symmetric stretching motions (∼1000-1600 cm-1) in both systems reflecting mode-specific excited state geometrical displacements. Transient absorption spectra confirm that efficient non-radiative processes dominate excited state relaxation dynamics which are confined to π-stacked aggregated chains. Surprisingly, we found little influence of the heteroatom consistent with efficient vibrational energy dissipation. Our results highlight the importance of aggregation and multi-dimensional Franck-Condon vibrational dynamics on the ability to harvest excitons, which are not usually considered in materials design and optimization schemes.

Dynamic Evolution from Chain Disorder to Order of PTB7 Condensed State Structures under External Fields

In this research, the effect of external fields (solvent, temperature, solution concentration, and external force) on dynamic evolution from chain disorder to order of poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2- b:4,5- b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4- b]thiophenediyl]] (PTB7) condensed state structures was explored by UV-vis absorption spectra, atomic force microscope, and transmission electron microscopy (TEM). It was found that PTB7 main chains presented amorphous conformations induced by the poor solvent 1,2-dichloroethane. However, the local ordered aggregation appeared in amorphous conformations when the solubility of the poor solvent was again lowered by reducing temperature. It is worth noting that the size of ordered aggregation was further increased with the decrease of solution concentration or increase of external force. It was found that there were two main PTB7 absorption peaks in the UV-vis absorption spectra; we denoted A_0 -0 for the intensity of the lower energy absorption peak and A_0-1 for the intensity of the higher energy absorption peak. The ratio R = A_0-0/ A_0-1 was used to characterize the dynamic evolution from disorder to order of the PTB7 condensed state structures in absorption spectra. It increased from 0.94 for PTB7 amorphous state to 1.25 for PTB7 large-size ordered aggregation. The dynamic evolution from chain disorder to order could also be distinctly observed by TEM. It was inferred that PTB7 condensed state structures (amorphous state, local ordered aggregation, and large-scale ordered aggregation) might exist simultaneously because of the complexity of copolymer conformations. This research is meaningful to establish physical basis for the molecule design and the synthesis of materials to enhance photoelectronic device efficiency based on condensed matter physics of conjugated polymer.

Hydrogen-bonding-directed helical nanofibers in a polythiophene-based all-conjugated diblock copolymer

One-dimensional (1D) helical nanofibers were prepared through the self-assembly of an achiral all-conjugated diblock copolymer, poly(3-hexylthiophene)-b-poly[3-(6-hydroxyl)hexylthiophene] (P3HT-b-P3HHT) in an aged pyridine solution. Such helical nanofibers were formed by the π-π interaction between planar rigid polythiophene backbones cooperating with the hydrogen-bonding interactions between the polar hydroxyl groups of the side chains of polythiophenes. Intriguingly, the Young's modulus of such helical fibers is as high as ∼5.16 GPa, which is about twice that of P3HT films characterized by the peak force quantitative nanomechanical (PF-QNM) method. Furthermore, for the first time, we report that such helical fibers based on all-conjugated polythiophenes exhibited a relatively high field-effect mobility of 0.03472 cm2 V-1 s-1. This work provides a promising approach to craft crystalline helical nanostructures based on polythiophenes possessing both superior mechanical and good charge transport properties, which has great potential for application in other π-conjugated systems or building blocks for complex superstructures, and mechanical and optoelectronic devices.

A new 'sticking' coating method for the in situ formation of nanofiber networks on micrometer to millimeter-sized surfaces

A simple versatile method to form a nanofiber coating in situ on micrometer to millimeter-sized surfaces is developed. A fiber-filled porous sheet is designed by electrospinning a dense polymer solution on a patterned PET/aluminum alloy collector. By sticking the small area surface onto a fiber-filled porous sheet, a nanofiber-coated small area surface is obtained, which overcomes conventional nanofiber coating difficulties.

Hydrogen-Bonding-Directed Ordered Assembly of Carboxylated Poly(3-Alkylthiophene)s

Hydrogen-bonding-induced ordered assembly of poly(3-alkylthiophene)s derivatives bearing carboxylic acid groups has been investigated from diluted and concentrated solutions to solid films using ultraviolet-visible absorption spectroscopy, polarized optical microscopy, and four-point probe conductivity measurements. In dilute solutions, the polymer undergoes a spontaneous structural transition from disordered coil-like to ordered rodlike conformations, which is evidenced by time-dependent chromism. Many factors such as alkyl-chain length, types of solvents, and temperature are studied to understand the assembly behavior. Transition kinetics of the assembly process reveals a universal second-order rate law, indicating an intermolecular origin due to hydrogen bonding. When more concentrated, hydrogen bonding drives nematic liquid-crystalline gelation above a critical concentration and the gels are thermally reversible. Under an appropriate balance of mechanical and thermal stresses, uniform liquid-crystalline monodomains are obtained through the application of a mechanical shear force. The dried films made from the sheared solutions display both optical and electrical anisotropies, with a more than 200% increase in charge transport parallel to the direction of shear as opposed to that in the perpendicular one.

Effect of Confinement on Photophysical Properties of P3HT Chains in PMMA Matrix

The influence of arrangement of poly(3-hexylthiophene) (P3HT) chains embedded into poly(methyl methacrylate) (PMMA) matrix on photophysical properties, such as electronic absorption spectrum, band gap, and photoluminescence quantum yield, of the formed P3HT aggregates have been studied. It has been found that variation of P3HT fraction in PMMA matrix from 25 to 2 wt% is accompanied with the increasing quantum yield of photoluminescence, red shift of the band gap, and structural change of P3HT crystallites. The above changes are accompanied with disruption of the continuous network of P3HT fraction into smaller P3HT particles with size ranged from several microns to several tens of nanometers. The results are interpreted in terms of the changing intermolecular packing and reduced intramolecular torsional disorder. It is discussed that the most contribution to the above changes comes from P3HT molecules at the interface of P3HT cluster and PMMA environment.

The Impact of Aggregation on the p-Doping Kinetics of Poly(3-hexylthiophene)

The morphological effects of regioregular poly(3-hexylthiophene) (P3HT) on its p-doping kinetics with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄-TCNQ) in solution are studied using optical absorption spectroscopy and stopped-flow technique. Two morphological forms, solubilized (s-P3HT) and nanowhiskers (nw-P3HT), are investigated. Both P3HT solubilized and aggregated solutions show similar characteristic near-IR absorption bands for integer charge transfer products with F₄-TCNQ. Kinetic analysis on p-doping of s-P3HT with F₄-TCNQ indicates that the doping reaction proceeds with a single reaction mechanism that is first order in s-P3HT. The doping kinetics of P3HT aggregate solution shows two distinctive reaction mechanisms. The slow mechanism has a reaction rate constant similar to that of solubilized P3HT solution, so it likely results from s-P3HT components that are present in the aggregate solution. The fast one is assigned to the nw-P3HT component, probably due to more efficient charge delocalization in the aggregated P3HT nanostructures. Additionally, the kinetic trends of the p-doping reactions are better fitted with the consideration of a Gaussian-like distribution of reactivities from P3HT, matching the complexity of polymeric systems originating from molecular weight and morphology variations. This study highlights the importance of considering different morphological forms of conjugated polymers on their charge-transfer reaction kinetics. The knowledge gained here should be fundamentally and practically important for future chemical doping applications in organic electronic device fabrications.

Investigation of the Effect of Thermal Annealing on Poly(3-hexylthiophene) Nanofibers by Scanning Probe Microscopy: From Single-Chain Conformation and Assembly Behavior to the Interfacial Interactions with Graphene Oxide

Poly(3-hexylthiophene) (P3HT) has been widely used in devices owing to its excellent properties and structural features. However, devices based on pure P3HT have not exhibited high performance. Strategies, such as thermal annealing and surface doping, have been used to improve the electrical properties of P3HT. In this work, different from previous studies, the effect of thermal annealing on P3HT nanofibers are examined, ranging from the single polymer chain conformation to chain packing, and the interfacial interactions with graphene oxide (GO) at nanoscale dimensions, by using scanning tunneling microscopy (STM), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). High-resolution STM images directly show the conformational changes of single polymer chains after thermal annealing. The morphology of P3HT nanofibers and the surface potential changes of the P3HT nanofibers and GO is further investigated by AFM and KPFM at the nanoscale, which demonstrate that the surface potentials of P3HT decrease, whereas that of GO increases after thermal annealing. All of the results demonstrate the stronger interfacial interactions between P3HT and GO occur after thermal treatments due to the changes in P3HT chain conformation and packing order.

Carrier Transport Enhancement in Conjugated Polymers through Interfacial Self-Assembly of Solution-State Aggregates

We demonstrate that local and long-range orders of poly(3-hexylthiophene) (P3HT) semicrystalline films can be synergistically improved by combining chemical functionalization of the substrate with solution-state disentanglement and preaggregation of P3HT in a θ solvent, leading to a very significant enhancement of the field effect carrier mobility. The preaggregation and surface functionalization effects combine to enhance the carrier mobility nearly 100-fold as compared with standard film preparation by spin-coating, and nearly 10-fold increase over the benefits of preaggregation alone. In situ quartz crystal microbalance with dissipation (QCM-D) experiments reveal enhanced deposition of preaggregates on surfaces modified with an alkyl-terminated self-assembled monolayer (SAM) in comparison to unaggregated polymer chains in the same conditions. Additional measurements reveal the combined preaggregation and surface functionalization significantly enhances local order of the conjugated polymer through planarization and extension of the conjugated backbone of the polymer which clearly translate to significant improvements of carrier transport at the semiconductor-dielectric interface in organic thin film transistors. This study points to opportunities in combining complementary routes, such as well-known preaggregation with substrate chemical functionalization, to enhance the polymer self-assembly and improve its interfacial order with benefits for transport properties.

Effects of Regioregularity and Molecular Weight on the Growth of Polythiophene Nanofibrils and Mixes of Short and Long Nanofibrils To Enhance the Hole Transport

Morphological control over polythiophenes has been widely studied; however the impacts of regioregularity (RR) and molecular weight (MW) on their structural development have not been investigated systematically. This study examined a representative polythiophene, poly(3-hexylthiophene) (P3HT), to reveal that small differences in the RR can produce a large difference in the growth of nanofibrils. Low-RR P3HTs generated neat long nanofibrils (LNFs), whereas high-RR P3HTs formed short nanofibrils (SNFs). This study identified a critical RR (96-98%) depending on their MW, below which P3HT grew into LNFs and above which P3HT grew into SNFs. This study also found that the mixing ratio between high-RR P3HT and a low-RR P3HT in the solution phase is strongly correlated with the relative populations of SNF and LNF in the coated film. This study suggested that mixing high-RR and low-RR polymers may be a good strategy to optimize the electrical properties of polythiophenes for target applications. As an example, a mixture of high-RR (75%) P3HT and low-RR P3HT (25%) improved considerably the power conversion efficiency of bulk heterojunction polymer solar cells compared with the values obtained from the pure high-RR P3HT and the pure low-RR P3HT.

An insight into non-emissive excited states in conjugated polymers

Conjugated polymers in the solid state usually exhibit low fluorescence quantum yields, which limit their applications in many areas such as light-emitting diodes. Despite considerable research efforts, the underlying mechanism still remains controversial and elusive. Here, the nature and properties of excited states in the archetypal polythiophene are investigated via aggregates suspended in solvents with different dielectric constants (ɛ). In relatively polar solvents (ɛ>∼ 3), the aggregates exhibit a low fluorescence quantum yield (QY) of 2–5%, similar to bulk films, however, in relatively nonpolar solvents (ɛ<∼ 3) they demonstrate much higher fluorescence QY up to 20–30%. A series of mixed quantum-classical atomistic simulations illustrate that dielectric induced stabilization of nonradiative charge-transfer (CT) type states can lead to similar drastic reduction in fluorescence QY as seen experimentally. Fluorescence lifetime measurement reveals that the CT-type states exist as a competitive channel of the formation of emissive exciton-type states.

Conjugated polymers in thin films exhibit low fluorescence quantum yields, but the mechanism is still unclear. Here, Hu et al. show the trade-off between charge transfer and emissive exciton states, whilst the former can be suppressed via dielectric-induced stabilization for large fluorescence quantum yields.

Organic phototransistors using poly(3-hexylthiophene) nanofibres

Here we report the fabrication of nanofibre-based organic phototransistors (OPTs) using preformed poly(3-hexylthiophene) (P3HT) nanofibres. OPT performance is analysed based on two important parameters: photoresponsivity R and photosensitivity P. Before testing the devices as OPTs, the normal organic field-effect transistor (OFET) operation is characterized, revealing a surface-coverage-dependent performance. With R reaching 250 A W(-1) in the on-state (V(GS) = -40 V) and P reaching 6.8 × 10(3) in the off-state (V(GS) = 10 V) under white light illumination (I(inc) = 0.91 mW cm(-2)), the best nanofibre-based OPTs outperform the OPTs fabricated from a solution of P3HT in chlorobenzene, in which no preformed fibres are present. The better performance is attributed to an increase in active layer crystallinity, a better layer connectivity and an improved edge-on orientation of the thiophene rings along the polymer backbone, resulting in a longer exciton diffusion length and enhanced charge carrier mobility, linked to a decreased interchain coupling energy. In addition, the increased order in the active layer crystallinity induces a better spectral overlap between the white light emission spectrum and the active layer absorption spectrum, and the absorption of incident light is maximised by the favourable parallel orientation of the polymer chains with respect to the OPT substrate. Combining both leads to an increase in the overall light absorption. In comparison with previously reported solution-processed organic OPTs, it is shown here that no special dielectric surface treatment or post-deposition treatment of the active device layer is needed to obtain high OPT performance. Finally, it is also shown that, inherent to an intrinsic gate-tuneable gain mechanism, changing the gate potential results in a variation of R over at least five orders of magnitude. As such, it is shown that R can be adjusted according to the incident light intensity.

Nano-structuring polymer/fullerene composites through the interplay of conjugated polymer crystallization, block copolymer self-assembly and complementary hydrogen bonding interactions

Core–shell P3HT/fullerene composite nanofibers were obtained using supramolecular chemistry involving cooperative orthogonal non-covalent interactions.

High intrachain order promotes triplet formation from recombination of long-lived polarons in poly(3-hexylthiophene) J-aggregate nanofibers

Photoluminescence (PL) of single poly(3-hexylthiophene) (P3HT) J-aggregate nanofibers (NFs) exhibits strong quenching under intensity-modulated pulsed excitation. Initial PL intensities (I(0)) decay to steady-state levels (ISS) typically within ∼ 1-10 μs, and large quenching depths (I(0)/I(SS) >2) are observed for ∼ 70% of these NFs. Similar studies of polymorphic, H-aggregate type P3HT NFs show much smaller PL quenching depths (I(0)/I(SS) ≤ 1.2). P3HT chains in J-type NF π-stacks possess high intrachain order, which has been shown previously to promote the formation of long-lived, delocalized polarons. We propose that these species recombine nongeminately to triplets on time scales of >1 ns. The identity of triplets as the dominant PL quenchers was confirmed by subjecting NFs to oxygen, resulting in an instantaneous loss of triplet PL quenching (I(0)/I(SS) ∼ 1). The lower intrachain order in H-type NFs, similar to P3HT thin-film aggregates, localizes excitons and polarons, leading to efficient geminate recombination that suppresses triplet formation at longer time scales. Our results demonstrate the promise of self-assembly strategies to control intrachain ordering within multichromophoric polymeric aggregate assemblies to tune exciton coupling and interconversion processes between different spin states.