Au nanorod assembly for sensitive SERS detection of airway inflammatory factors in sputum

In this paper, we demonstrate a surface-enhanced Raman spectroscopy (SERS) biosensor based on the self-assembly of gold nanorods (AuNRs) for the specific detection of airway inflammatory factors in diluted sputum. The AuNR surface was modified with an antibody that was able to specifically recognize an airway inflammatory factor, interleukin-5 (IL-5), so that a end-to-end self-assembly system could be obtained, resulting in an order of magnitude amplification of the Raman signal and greatly improved sensitivity. Meanwhile, the outer layer of the biosensor was coated with silicon dioxide, which improved the stability of the system and facilitated its future applications. When the detected concentration was in the range of 0.1-50 pg/mL, the SERS signal generated by the sensor showed a good linear relationship with the IL-5 concentration. Moreover, it had satisfactory performance in diluted sputum and clinical subjects with asthma, which could achieve sensitive detection of the airway inflammatory factor IL-5. Overall, the developed biosensor based on the SERS effect exhibited the advantages of rapid and sensitive detecting performance, which is suitable for monitoring airway inflammatory factors in sputum.

Nanoparticle Size Influences the Self-Assembly of Gold Nanorods Using Flexible Streptavidin-Biotin Linkages

The self-assembly of colloidal nanocrystals remains of robust interest due to its potential in creating hierarchical nanomaterials that have advanced function. For gold nanocrystals, junctions between nanoparticles yield large enhancements in local electric fields under resonant illumination, which is suitable for surface-enhanced spectroscopies for molecular sensors. Gold nanorods can provide such plasmonic fields at near-infrared wavelengths of light for longitudinal excitation. Through the use of careful concentration and stoichiometric control, a method is reported herein for selective biotinylation of the ends of gold nanorods for simple, consistent, and high-yielding self-assembly upon addition of the biotin-binding protein streptavidin. This method was applied to four different sized nanorods of similar aspect ratio and analyzed through UV-vis spectroscopy for qualitative confirmation of self-assembly and transmission electron microscopy to determine the degree of self-assembly in end-linked nanorods. The yield of end-linked assemblies approaches 90% for the largest nanorods and approaches 0% for the smallest nanorods. The number of nanorods linked in one chain also increases with an increased nanoparticle size. The results support the notion that the lower ligand density at the ends of the larger nanorods yields preferential substitution reactions at those ends and hence preferential end-to-end assembly, while the smallest nanorods have a relatively uniform ligand density across their surfaces, leading to spatially random substitution reactions.

Fluorogenic response from DNA templated micrometer range self-assembled gold nanorod

Plasmonic gold nanorod (AuNR) on a macromolecular matrix exhibits an end-to-end (ETE) long-range self-assembly (AuNR)n with n > 100. In the case of small molecules as a template, the pre-synthesized macromolecular matrix is missing and this brings a synthetic challenge in directed long-range assembly of AuNR. Self-assembly with thiol-modified small DNA and AuNR shows a much short-range ETE assembly with n < 25 via a simple evaporation technique on a solid surface. In this study, the introduction of two short amine modified probe DNAs (∼2.5 nm) and one 22-mer complementary single strand (ss)-DNA template (∼7 nm) show the long-range ETE self-assembly of (AuNR)n with n > 130. In the solution state, the zigzag arrangement within the assembled structure controls the typical change in the absorption behavior for (AuNR)n ETE assembly. The formation of this long-range ETE self-assembly in a solution state was verified from the combined effect of fluorescence resonance energy transfer (FRET) and hotspot-induced fluorescence enhancement. The probe DNAs and templated DNA concentration on fluorescence enhancement have been varied to monitor the effect of (AuNR)n with n = ∼5-130 in ETE self-assembly. Primarily quenched FRET acceptor in the presence of AuNR decisively exhibits remarkable fluorogenic response in ETE self-assembly with maximum n value. Although the FRET efficiencies among the fluorophores are comparable, the fluorogenic boost in ETE AuNR is due to the increased number of intrinsic navigated hotspots in these assemblies.

SERS immuno- and apta-assays in biosensing/bio-detection: Performance comparison, clinical applications, challenges

Surface Enhanced Raman Spectroscopy is increasingly used as a sensitive bioanalytical tool for detection of variety of analytes ranging from viruses and bacteria to cancer biomarkers and toxins, etc. This comprehensive review describes principles of operation and compares the performance of immunoassays and aptamer assays with Surface Enhanced Raman scattering (SERS) detection to each other and to some other bioassay methods, including ELISA and fluorescence assays. Both immuno- and aptamer-based assays are categorized into assay on solid substrates, assays with magnetic nanoparticles and assays in laminar flow or/and strip assays. The best performing and recent examples of assays in each category are described in the text and illustrated in the figures. The average performance, particularly, limit of detection (LOD) for each of those methods reflected in 9 tables of the manuscript and average LODs are calculated and compared. We found out that, on average, there is some advantage in terms of LOD for SERS immunoassays (0.5 pM median LOD of 88 papers) vs SERS aptamer-based assays (1.7 pM median LOD of 51 papers). We also tabulated and analyzed the clinical performance of SERS immune and aptamer assays, where selectivity, specificity, and accuracy are reported, we summarized the best examples. We also reviewed challenges to SERS bioassay performance and real-life application, including non-specific protein binding, nanoparticle aggregation, limited nanotag stability, sometimes, relatively long time to results, etc. The proposed solutions to those challenges are also discussed in the review. Overall, this review may be interesting not only to bioanalytical chemist, but to medical and life science researchers who are interested in improvement of bioanalyte detection and diagnostics.

Solvent-driven biotoxin into nano-units as a versatile and sensitive SERS strategy

In recent years, marine biotoxins have posed a great threat to fishermen, human security and military prevention and control due to their diverse, complex, toxic and widespread nature, and the development of rapid and sensitive methods is essential. Surface-enhanced Raman spectroscopy (SERS) is a promising technique for the rapid and sensitive in situ detection of marine biotoxins due to its advantages of rapid, high sensitivity, and fingerprinting information. However, the complex structure of toxin molecules, small Raman scattering cross-section and low affinity to conventional substrates make it difficult to achieve direct and sensitive SERS detection. Here, we generate a large number of active hotspot structures by constructing monolayer nanoparticle films with high density hotspots, which have good target molecules that can actively access the hotspot structures using nanocapillaries. In addition, the efficient and stable signal can be achieved during dynamic detection, increasing the practicality and operability of the method. This versatile SERS method achieves highly sensitive detection of marine biotoxins GTX and NOD, providing good prospects for convenient, rapid and sensitive SERS detection of marine biotoxins.

Fast synthesis of gold nanostar SERS substrates based on ion-track etched membrane by one-step redox reaction

Surface-enhanced Raman scattering (SERS), due to its high detecting sensitivity and rapid data acquisition ability, has been considered as a powerful technique for label-free ultrasensitive detection of chemical and biochemical analytes. As an important part, the uniform SERS substrate is the prerequisite for this technology being used in all the related areas. Therefore, seeking the fast, convenient and low-cost way to obtain the SERS substrate with high performance and reproducibility never stops in recent decades. In this work, the PC membrane with uniform nanopores obtained by ion irradiation and chemical etching (i.e., ion-track etched PC membrane) was first used to prepare the gold nanostar SERS substrate. The monolayer gold nanostars can be obtained through a one-step redox reaction on the surface of the PC membrane, which not only can act as the base of SERS substrate but also can work as the reaction adjuster. By optimizing the growth conditions, the SERS substrate with uniform monolayer gold nanostars can be fabricated without any complicated procedures and costly equipment fast (in 20 mins). Meanwhile, the prepared flexible gold nanostar SERS substrate exhibits excellent Raman performance, which can effectively detect the analyte R6G with the concentration as low as 1 × 10^-10 M and the SERS enhancement factors can be around 3.70 × 10⁵. The new facile SERS substrate preparation method is cost-effective, convenient, fast and easily scale up, which can satisfy the requests of the real applications in many fields.

Controlled synthesis of gold nanorod dimers with end-to-end configurations

End-to-end gold nanorod dimers provide unique plasmonic hotspots with extremely large near-field enhancements in the gaps. Thereby they are beneficial in a wide range of applications, such as enhancing the emissions from ultra-weak emitters. For practical purposes, synthesis of gold nanorod dimers with high yield, especially on the substrates, is essential. Here, we demonstrate two controllable strategies to synthesize gold nanorod dimers based on the self-assembly of gold nanorods, either in bulk solution or on the surface of a glass substrate directly. Both methods can give a high yield of gold nanorod dimers, yet, assembling them directly on the substrate provides more flexibility in controlling the shape and size of each nanorod within the dimer. We also show that these gold nanorod dimers can be used to enhance two-photon-excited fluorescence signals at the single-molecule level.

Selenocystine and Photo-Irradiation Directed Growth of Helically Grooved Gold Nanoarrows

The fabrication of discrete nanostructures with both plasmonic circular dichroism (PCD) and chiral features is still a challenge. Here, gold nanoarrows (GNAs) with both chiroptical responses and chiral morphologies are achieved by using L-selenocystine (L-SeCys₂ ) as a chiral inducer. While L-SeCys₂ generates GNAs with a weak PCD signal, the irradiated L-SeCys₂ (irr-L-SeCys₂ ) leads to GNAs with featured helical grooves (HeliGNAs) accompanying with a strong PCD signal. It is revealed that when L-SeCys₂ is photo-irradiated, the emergence of selenyl radicals plays an important role in the formation of HeliGNAs and enhancement of the chiroptical signal. In comparison with L-SeCys₂ and the other kinds of sulfur-containing amino acids, the formation mechanism of helical grooves on the surface of GNAs is proposed. Both HeliGNAs and GNAs are used to discriminate amino acids by utilizing surface enhanced Raman scattering (SERS) effect. In the presence of either GNAs or HeliGNAs as the substrate, Fmoc-L-Phe shows more significant SERS than Fmoc-D-Phe. This study may advance the design of discrete plasmonic nanomaterials with both chiral morphology and potential applications in discrimination of chiral molecules.

Janus bimetallic nanorod clusters-poly(aniline) nanocomposites with temperature-responsiveness for Raman scattering-based biosensing

Herein, Janus bimetallic nanorod clusters-poly(aniline) nanocomposites (JRCPCs) with gold nanorod clusters (GNRCs) in side-by-side (SBS) or end-to-end (ETE) configuration are synthesized, and applied to surface-enhanced Raman scattering (SERS)-based biosensing of carcinoembryonic antigen (CEA). Taking advantage of their geometrical and chemical anisotropy, GNRCs in both SBS and ETE configurations are prepared by addition of negatively charged citrate anions and poly(acrylic acid)-block-poly(N-isopropylacrylamide) (PAAc-b-PNIPAM), respectively, to electrostatically interact with cationic cetyltrimethylammonium bromide surfactant on the side of the gold nanorods (GNRs). Subsequently, the JRCPCs are prepared by unidirectional growth of polyaniline and additional growth of Ag onto these GNRCs. JRCPCs with GNRCs in either the SBS or the ETE configuration show strong enhancement of electromagnetic field at both GNR aggregates and GNRC core-Ag shell gaps of bimetallic nanorod cluster components. In particular, because temperature-responsive PAAc-b-PNIPAM of JRCPCs is embedded at GNR junctions, interparticle gaps generated in GNRCs in ETE configuration are controlled via temperature-triggered hydration-dehydration of the PAAc-b-PNIPAM chains such that optical properties are largely changed. With distinct surface functionalities from JRCPCs, SERS-based quantitative analysis of CEA is achieved using JRCPCs as SERS nanoprobes. This work presents the great potential of advanced Janus nanocomposites for SERS-based biosensing applications.

Multiplexed SERS Detection of Microcystins with Aptamer-Driven Core-Satellite Assemblies

We describe surface-enhanced Raman spectroscopy (SERS) aptasensors that can indirectly detect MC-LR and MC-RR, individually or simultaneously, in natural water and in algal culture. The sensor is constructed from nanoparticles composed of successive layers of Au core-SERS label-silver shell-gold shell (Au@label@Ag@Au NPs), functionalized on the outer Au surface by MC-LR and/or MC-RR aptamers. These NPs are immobilized on asymmetric Au nanoflowers (AuNFs) dispersed on planar silicon substrates through DNA hybridization of the aptamers and capture DNA sequences with which the AuNFs are functionalized, thereby forming core-satellite nanostructures on the substrates. This construction led to greater electromagnetic (EM) field enhancement of the Raman label-modified region, as supported by finite-difference time-domain (FDTD) simulations of the core-satellite assembly. In the presence of MC-LR and/or MC-RR, the aptamer-functionalized NPs dissociate from the AuNFs because of the stronger affinity of the aptamers with the MCs, which decreases the SERS signal, thus allowing indirect detection of the MCs. The improved SERS sensitivity significantly decreased the limit of detection (LOD) for separate MC-LR detection (0.8 pM) and for multiplex detection (1.5 pM for MC-LR and 1.3 pM for MC-RR), compared with other recently reported SERS-based methods for MC-LR detection. The aptasensors show excellent selectivity to MC-LR/MC-RR and excellent recoveries (96-105%). The use of these SERS aptasensors to monitor MC-LR production over 1 week in a culture medium of M. aeruginosa cells demonstrates the applicability of the sensors in a realistic environment.

Growth of Porous Ag@AuCu Trimetal Nanoplates Assisted by Self-Assembly

The self-assembly process of metal nanoparticles has aroused wide attention due to its low cost and simplicity. However, most of the recently reported self-assembly systems only involve two or fewer metals. Herein, we first report a successful synthesis of self-assembled Ag@AuCu trimetal nanoplates in aqueous solution. The building blocks of multibranched AuCu alloy nanocrystals were first synthesized by a chemical reduction method. The growth of Ag onto the AuCu nanocrystals in the presence of hexadecyltrimethylammonium chloride (CTAC) induces a self-assembly process and formation of Ag@AuCu trimetal nanoplates. These nanoplates with an average side length of over 2 μm show a porous morphology and a very clear boundary with the branches of the as-prepared AuCu alloy nanocrystals extending out. The shape and density of the Ag@AuCu trimetal nanoplates can be controlled by changing the reaction time and the concentration of silver nitrate. The as-assembled Ag@AuCu nanoplates are expected to have the potential for wide-ranging applications in surface-enhanced Raman scattering (SERS) and catalysis owing to their unique structures.

Gold Nanorods for LSPR Biosensing: Synthesis, Coating by Silica, and Bioanalytical Applications

Nanoparticles made of coinage metals are well known to display unique optical properties stemming from the localized surface plasmon resonance (LSPR) phenomenon, allowing their use as transducers in various biosensing configurations. While most of the reports initially dealt with spherical gold nanoparticles owing to their ease of synthesis, the interest in gold nanorods (AuNR) as plasmonic biosensors is rising steadily. These anisotropic nanoparticles exhibit, on top of the LSPR band in the blue range common with spherical nanoparticles, a longitudinal LSPR band, in all respects superior, and in particular in terms of sensitivity to the surrounding media and LSPR-biosensing. However, AuNRs synthesis and their further functionalization are less straightforward and require thorough processing. In this paper, we intend to give an up-to-date overview of gold nanorods in LSPR biosensing, starting from a critical review of the recent findings on AuNR synthesis and the main challenges related to it. We further highlight the various strategies set up to coat AuNR with a silica shell of controlled thickness and porosity compatible with LSPR-biosensing. Then, we provide a survey of the methods employed to attach various bioreceptors to AuNR. Finally, the most representative examples of AuNR-based LSPR biosensors are reviewed with a focus put on their analytical performances.

Application of surface-enhanced Raman spectroscopy in fast detection of toxic and harmful substances in food

Surface-enhanced Raman spectroscopy (SERS) is being considered as a powerful technique in the area of food safety due to its rapidity, sensitivity, portability, and non-destructive features. This review aims to provide a comprehensive understanding of SERS applications in fast detection of toxic and harmful substances in food matrix. The enhancement mechanism of SERS, classification of active substrates, detection methods, and their advantages and disadvantages are briefly discussed in the review. The latest research progress of fast SERS detection of food-borne pathogens, mycotoxins, shellfish toxins, illegal food additives, and drug residues are highlighted in sections of the review. According to the current status of SERS detection of food-derived toxic and harmful substances, the review comes up with certain problems to be urgently resolved in SERS and brings up the perspectives on the future directions of SERS based biosensors.

Gold nanospheres and nanorods for anti-cancer therapy: comparative studies of fabrication, surface-decoration, and anti-cancer treatments

Various gold nanoparticles have been explored as cancer therapeutics because they can be widely engineered for use as efficient drug carriers and diagnostic agents, and in photo-irradiation therapy. In the current review, we focused on shape-dependent biomedical applications of gold nanoparticles including gold nanospheres and nanorods. Fabrication and functionalization strategies of two different gold nanoparticles for anti-cancer therapy are introduced and the distinguishing performance depending on the shape is discussed to suggest the best carrier shape for specific applications. Moreover, recent advances in anti-cancer immunotherapy using gold nano-carriers are discussed. Thus, this comparative review can be helpful in deciding on suitable shapes and surface-modification strategies for preparing various gold nanoparticle-based therapeutics in anti-cancer therapy.

A Fluorescence and Surface-Enhanced Raman Spectroscopic Dual-Modal Aptasensor for Sensitive Detection of Cyanotoxins

The ability to detect trace analytes without necessitating solid surface attachment or complicated processing steps would facilitate the translation of sensors for monitoring environmental toxins in the field. To address a critical unmet need in fresh water ecology, we have developed a dual-modal aptamer-based biosensor (aptasensor), featuring fluorescence and surface-enhanced Raman spectroscopy (SERS), for sensitive and selective detection of hepatotoxin microcystin-LR (MC-LR). The rational sensor design is based on the high affinity of the cyanine (Cy3) dye-modified complementary DNA (Cy3-cDNA) strand toward the plasmonic gold nanostars (GNSs) in comparison to the Cy3-cDNA/aptamer duplex. The preferential binding of MC-LR toward the MC-LR-specific aptamer triggers the dissociation of Cy3-cDNA/aptamer duplexes, which switches the Cy3's fluorescence "off" and SERS "on" due to the proximity of Cy3 dye to the GNS surface. Both fluorescence and SERS intensities are observed to vary linearly with the MC-LR concentration over the range of investigation. We have achieved high sensitivity and excellent specificity with the aptasensor toward MC-LR, which can be attributed to the fluorescence quenching effect, significant SERS enhancement by the GNSs, and the high affinity of the aptamer toward the MC-LR analytes. We further demonstrate the applicability of the present aptasensor for detection of MC-LR in a diverse set of real water samples with high accuracy and excellent reproducibility. With further refinement, we believe that the aptamer-driven complementary assembly of the SERS and fluorescence sensing constructs can be applied for rapid, multiplexed, and robust measurements of environmental toxins in the field.

A Review of Chinese Raman Spectroscopy Research Over the Past Twenty Years

This paper introduces the major Chinese research groups in the fields of biomedicine, food safety, environmental testing, material research, archaeological and cultural relics, gem identification, forensic science, and other research areas of Raman spectroscopy and combined methods spanning the two decades from 1997 to 2017. Briefly summarized are the research directions and contents of the major Chinese Raman spectroscopy research groups, giving researchers engaged in Raman spectroscopy research a more comprehensive understanding of the state of Chinese Raman spectroscopy research and future development trends to further develop Raman spectroscopy and its applications.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Ultrasensitive Detection of Hepatotoxic Microcystin Production from Cyanobacteria Using Surface-Enhanced Raman Scattering Immunosensor

Microcystin-LR (MC-LR) is considered the most common hazardous toxin produced during harmful algal blooms. In addition to potential risk of long-term exposure to low concentrations in drinking water, acute toxicity due to MC-LR resulting from algal blooms could result in fatalities in rare cases. Although several methods are currently available to detect MC-LR, development of a low-cost, ultrasensitive measurement method would help limit exposure by enabling early detection and continuous monitoring of MC-LR. Here, we develop a surface-enhanced Raman scattering (SERS) spectroscopic immunosensor for detection and quantification of the hepatotoxic MC-LR toxin in aquatic settings with excellent robustness, selectivity, and sensitivity. We demonstrate that the developed SERS sensor can reach a limit of detection (0.014 μg/L) at least 1 order of magnitude lower and display a linear dynamic detection range (0.01 μg/L to 100 μg/L) 2 orders of magnitude wider in comparison to the commercial enzyme-linked immunosorbent assay test. The superior analytical performance of this SERS immunosensor enables monitoring of the dynamic production of MC-LR from a Microcystis aeruginosa culture. We believe that the present method could serve as a useful tool for detection of hepatotoxic microcystin toxins in various aquatic settings such as drinking water, lakes, and reservoirs. Further development of this technique could result in single-cell microcystin resolution or real-time monitoring to mitigate the associated toxicity and economic loss.

Organometallic-Constructed Tip-Based Dual Chemical Sensing by Tip-Enhanced Raman Spectroscopy for Diabetes Detection

Tip-enhanced Raman spectroscopy (TERS) is capable of probing specific molecular information with high sensitivity, but dual chemical sensing remains a challenge. Another major hindrance to TERS chemical detection in biosamples such as blood is the interference from the strong absorptions of biomolecules. Herein, we report the preparation of an organometallic-conjugated TERS tip. We demonstrate that organometallic chemistry can be perfectly coupled with TERS for dual-molecule sensing. The unique Raman signals generated by the organometallic compound circumvent signal interference from the biomolecules in blood, allowing the rapid analysis of two important molecules (glucose and thiol) in ultralow volume (50 nL) samples. This enabled a correlation between the thiol and glucose levels in the blood of nondiabetic and diabetic patients to be drawn.

A bimodal (SERS and colorimetric) aptasensor for the detection of Pseudomonas aeruginosa

An aptamer based assay is described for the determination of Pseudomonas aeruginosa (P. aeruginosa). It is bimodal in that both surface enhanced Raman spectroscopy (SERS) and colorimetry are applied for quantitation. The aptamer against P. aeruginosa and its corresponding complementary DNA fragment (cDNA) were conjugated to two kinds of differently sized gold nanoparticles (AuNPs). The 30 nm AuNPs carrying the aptamer are used as color signal probes, while the cDNA-15 nm AuNP conjugates serve as SERS signalling probes. In the absence of P. aeruginosa, the two probes assemble to form the duplex structure. When the probes are exposed to P. aeruginosa, the aptamer dissociates from its cDNA and binds the target. After centrifugation, the SERS signal from the supernatant decreased, due to the decreased electromagnetic effect. On addition of 3,3',5,5'-tetramethylbenzidine (TMB) and hydrogen peroxide, a relatively rapid catalytic reaction between horseradish peroxidase (linked to the aptamer on the 30-nm AuNPs) and TMB occurred, resulting in the formation of a green color with an absorption peak at 640 nm. The reliability of the approach was validated by detecting different levels of P. aeruginosa in spiked tap water and chicken meat samples. The average recoveries ranged from 88% to 112%, confirming the practicality of this method. In our perception, this dual mode aptasensor paves the way for accurate and reliable determination of P. aeruginosa. Conceivably, the method has a wide scope in that it may be extended to the determination of various other species for which respective aptamers are available. Graphical abstract Schematic illustration of a bimodal aptasensor based on surface enhanced Raman scattering (SERS) and color change for the detection of Pseudomonas aeruginosa.

Facing Challenges in Real-Life Application of Surface-Enhanced Raman Scattering: Design and Nanofabrication of Surface-Enhanced Raman Scattering Substrates for Rapid Field Test of Food Contaminants

Surface-enhanced Raman scattering (SERS) is capable of detecting a single molecule with high specificity and has become a promising technique for rapid chemical analysis of agricultural products and foods. With a deeper understanding of the SERS effect and advances in nanofabrication technology, SERS is now on the edge of going out of the laboratory and becoming a sophisticated analytical tool to fulfill various real-world tasks. This review focuses on the challenges that SERS has met in this progress, such as how to obtain a reliable SERS signal, improve the sensitivity and specificity in a complex sample matrix, develop simple and user-friendly practical sensing approach, reduce the running cost, etc. This review highlights the new thoughts on design and nanofabrication of SERS-active substrates for solving these challenges and introduces the recent advances of SERS applications in this area. We hope that our discussion will encourage more researches to address these challenges and eventually help to bring SERS technology out of the laboratory.

A General Method for Large-Scale Fabrication of Semiconducting Oxides with High SERS Sensitivity

Surface-enhanced Raman spectroscopy (SERS) is a versatile and powerful spectroscopic technique for substance analysis and detection. So far, the highest detection sensitivities have been realized on noble nanostructure substrates, which, however, are costly, unstable, and non-biocompatible. While semiconductor substrates could in principle be used, existing realizations have either resulted in substrates with low sensitivities or used methods that have poor technical control. Here we report a general and versatile method, based on ion irradiation and vacuum annealing, for fabricating large-scale reduced semiconducting oxide SERS substrates with high sensitivities. The SERS enhancement mainly stems from oxygen vacancy-associated electronic states created by the ion irradiation of sample; these states enhance the charge-transfer (CT) mechanism between the oxide substrate and the adsorbed molecules and thus significantly magnify SERS signals. The improved carrier mobility by vacuum annealing and the introduction of impurity energy levels and nanostructures enhances further the CT efficiency. A detection limit as low as 5 × 10^-8 M was achieved; this is the highest sensitivity among the reported semiconductors, and it even compares to noble metals without the aid of "hot spots". The method is general-we demonstrate it on WO₃, ZnO, and TiO₂ substrates using Ar⁺ and N⁺ ion beam irradiation-and broadly applicable to produce noble-metal-free SERS substrates with high sensitivities.

Sulfate-Mediated End-to-End Assembly of Gold Nanorods

There is interest in the controlled aggregation of gold nanorods (GNRs) for the production of extended nanoassemblies. Prior studies have relied upon chemical modification of the GNR surface to achieve a desired final aggregate structure. Herein we illustrate that control of electrolyte composition can facilitate end-to-end assembly of cetyltrimethylammonium-bromide-coated (CTAB) GNRs. By adjusting either the sulfate anion concentration or the exposure time it is possible to connect GNRs in chain-like assemblies. In contrast, end-to-end assembly was not observed in control experiments using monovalent chloride salts. We attribute the end-to-end assembly to the localized association of sulfate with exposed quaternary ammonium head groups of CTAB at the nanorod tip. To quantify the assembly kinetics, visible-near-infrared extinction spectra were collected over a predetermined time period, and the colloidal behavior of the GNR suspensions was interpreted using plasmon band analysis. Transmission electron microscopy and atomic force microscopy results support the conclusions reached via plasmon band analysis, and the colloidal behavior is consistent with Derjaguin-Landau-Verwey-Overbeek theory.

Seedless Synthesis of Monodispersed Gold Nanorods with Remarkably High Yield: Synergistic Effect of Template Modification and Growth Kinetics Regulation

Gold nanorods (AuNRs) are versatile materials due to their broadly tunable optical properties associated with their anisotropic feature. Conventional seed-mediated synthesis is, however, not only limited by the operational complexity and over-sensitivity towards subtle changes of experimental conditions but also suffers from low yield (≈15 %). A facile seedless method is reported to overcome these challenges. Monodispersed AuNRs with high yield (≈100 %) and highly adjustable longitudinal surface plasmon resonance (LSPR) are reproducibly synthesized. The parameters that influence the AuNRs growth were thoroughly investigated in terms of growth kinetics and soft-template regulation, offering a better understanding of the template-based mechanism. The facile synthesis, broad tunability of LSRP, high reproducibility, high yield, and ease of scale-up make this method promising for the future mass production of monodispersed AuNRs for applications in catalysis, sensing, and biomedicine.

End-to-end assembly and disassembly of gold nanorods based on photo-responsive host–guest interaction

The end-to-end assembly and disassembly of gold nanorods were realized via HS-β-CD recognition and controllable by both UV light irradiation and guest competition.

Core-Shell Nanorod Columnar Array Combined with Gold Nanoplate-Nanosphere Assemblies Enable Powerful In Situ SERS Detection of Bacteria

Development of a label-free ultrasensitive nanosensor for detection of bacteria is presented. Sensitive assay for Gram-positive bacteria was achieved via electrostatic attraction-guided plasmonic bifacial superstructure/bacteria/columnar array assembled in one step. Dynamic optical hotspots were formed in the hybridized nanoassembly under wet-dry critical state amplifying efficiently the weak vibrational modes of three representative food-borne Gram-positive bacteria, that is, Staphylococcus xylosus, Listeria monocytogenes, and Enterococcus faecium. These three bacteria with highly analogous Raman spectra can be effectively differentiated through droplet wet-dry critical SERS approach combined with 3D PCA statistical analysis so that highly sensitive discrimination of bacterial species and samples containing mixtures of bacteria can be achieved.

Chiral and Achiral Nanodumbbell Dimers: The Effect of Geometry on Plasmonic Properties

Metal nanoparticles with a dumbbell-like geometry have plasmonic properties similar to those of their nanorod counterparts, but the unique steric constraints induced by their enlarged tips result in distinct geometries when self-assembled. Here, we investigate gold dumbbells that are assembled into dimers within polymeric micelles. A single-particle approach with correlated scanning electron microscopy and dark-field scattering spectroscopy reveals the effects of dimer geometry variation on the scattering properties. The dimers are prepared using exclusively achiral reagents, and the resulting dimer solution produces no detectable ensemble circular dichroism response. However, single-particle circular differential scattering measurements uncover that this dimer sample is a racemic mixture of individual nanostructures with significant positive and negative chiroptical signals. These measurements are complemented with detailed simulations that confirm the influence of various symmetry elements on the overall peak resonance energy, spectral line shape, and circular differential scattering response. This work expands the current understanding of the influence self-assembled geometries have on plasmonic properties, particularly with regard to chiral and/or racemic samples which may have significant optical activity that may be overlooked when using exclusively ensemble characterization techniques.

SERS encoded nanoparticle heterodimers for the ultrasensitive detection of folic acid

In this paper, gold–silver nanoparticle (AuNP–AgNP) heterodimers were assembled with highly yield as an active SERS substrate, based on antigen–antibody immunoreaction. The developed SERS sensor has successful achieved the ultrasensitive detection of folic acid (FA) with the limit of detection (LOD) as 0.86 pg/mL. And the linear range was from 0.005 ng/mL to 1 ng/mL. The results also demonstrated that this developed method showed high specificity and excellent recovery for the human serum samples, indicating its promising potential in bio-diagnosis and the environmental monitoring.

SERS-based immunoassay using a core–shell SiO2@Ag immune probe and Ag-decorated NiCo2O4 nanorods immune substrate

A novel sandwich structure consisting of the SiO₂@Ag immune probe and the Ag-decorated NNRs substrate was used to detect AFP and a detection limit is as low as 2.1 fg mL⁻¹.

Hybridized enhancement of the SERS detection of chemical and bio-marker molecules through Au nanosphere ornamentation of hybrid amorphous/crystalline Si nanoweb nanostructure biochip devices

We report the fabrication of hybrid Si SERS nanobiosensor biochip devices.

Complete separation of macroscopic rod-like bimetallic nanoassembly perpendicular and parallel on substrate for simultaneous sensing of microorganisms

Although two kinds of macroscopic ordered tridimensional nanoassemblies, i.e., alignment of nanorods, can be yielded by controllable droplet evaporation methods, complete separation of the nanoassembly perpendicular or parallel to substrate is quite challenging. It can, however, be realized by the aid of facet blocking combined with the tuning of ionic strength and colloidal concentration. The as-fabricated rod-like bimetallic nanoassembly has proved to be an excellent SERS active substrate compared to random aggregates. It should be mentioned that macroscopic ordered tridimensional nanoassembly perpendicular to the substrate can be used as a highly active SERS substrate with good uniformity and can be successfully applied for finely discriminating two microorganisms: Escherichia coli bacteria and Saccharomycetes.

Controlled Assembly of Gold Nanostructures on a Solid Substrate via Imidazole Directed Hydrogen Bonding for High Performance Surface Enhance Raman Scattering Sensing of Hypochlorous Acid

Here, we report an efficient and facile method for constructing plasmonic gold nanostructures with controlled morphology on a Si wafer and its use as a surface enhanced Raman scattering (SERS) reporting system for specific detection of HClO. To achieve this substrate, the core gold nanoparticles (AuNPs, ∼100 nm) with a monolayer of 4-mercaptoimidazole (MI) ligands were covalently linked to a thiol-derived Si wafer (MI-AuNPs@SH-Si). Taking advantage of the intermolecular NH···N hydrogen bond (HB) provided by the neighboring imidazole moiety, multiple satellite AuNPs (∼12 nm) decorated with both MI and a Raman reporter are assembled around the core MI-AuNPs at pH 5.0. The uniform morphology of the AuNP-based nanostructures on the Si wafer offer a high density of hot spots with good SERS performance for detecting HClO. The fast oxidation of the imidazole moieties by HClO causes HB destruction and therefore separation of the satellite AuNPs from the core AuNPs, which gives rise to SERS signal damping of the chip that is employed for HClO analysis. This simple and cost-effective method is highly selective for HClO over common interferences and several reactive oxygen/nitrogen species, and enabled rapid analysis at concentrations as low as 1.2 μmol L(-1). The present approach is applied to analyze water and human serum samples with satisfactory results.

Triple Raman Label-Encoded Gold Nanoparticle Trimers for Simultaneous Heavy Metal Ion Detection

Here, a triple Raman label-encoded gold nanoparticle (AuNP) trimer is fabricated for heavy metal ion detection. In the presence of target ions, the gold nanoparticles modified with different Raman labels are assembled into trimers and produce different enhancements of Raman reporters, which are functionalized as Raman probes for simultaneous silver and mercury ion detection. Under optimized conditions, the limits of detection of Ag(+) and Hg(2+) reach 8.42 × 10(-12) and 16.78 × 10(-12) m, respectively.

Ultrasensitive aptamer-based SERS detection of PSAs by heterogeneous satellite nanoassemblies

An ultrasensitive method for surface enhanced Raman scattering (SERS) detection of prostate-specific antigens (PSAs) was established based on the aptamer directed core-satellite nanostructures. A limit of detection (LOD) of 4.8 aM for PSA was obtained.

SERS-active Au@Ag nanorod dimers for ultrasensitive dopamine detection

Dopamine (DA) is a neurotransmitter which plays a key role in the life science. Self-assembled Au@Ag nanorod dimers based on aptamers were developed for ultrasensitive dopamine detection. The electronic field was significantly enhanced by the addition of silver shell coating on the surface of Au NR dimer. The results displayed that Au@Ag NR dimers were ideal building blocks for constructing the SERS substrates with prominent Raman enhancement effects. It was found that with using this Surface-enhanced Raman scattering (SERS)-encoded this sensing system, a limit of detection of 0.006 pM and a wide linear range of 0.01-10 pM for dopamine detection were obtained. Our work open up a new avenue for the diagnosis and drug-discovery programs.

Incident angle-tuned, broadband, ultrahigh-sensitivity plasmonic antennas prepared from nanoparticles on imprinted mirrors

We have used a direct imprint-in-metal method that is cheap and rapid to prepare incident angle-tuned, broadband, ultrahigh-sensitivity plasmonic antennas from nanoparticles (NPs) and imprinted metal mirrors. By changing the angle of incidence, the nanoparticle-imprinted mirror antennas (NIMAs) exhibited broadband electromagnetic enhancement from the visible to the near-infrared (NIR) regime, making them suitable for use as surface-enhanced Raman scattering (SERS)-active substrates. Unlike other SERS-active substrates that feature various structures with different periods or morphologies, the NIMAs achieved broadband electromagnetic enhancement from single configurations. The enhancement of the electric field intensity in the NIMAs originated from coupling between the localized surface plasmon resonance of the NPs and the periodic structure-excited surface plasmon resonance (SPR) of the imprinted mirror. Moreover, the coupling wavelengths could be modulated because the SPR wavelength was readily tuned by changing the angle of the incident light. Herein, we demonstrate that such NIMAs are robust substrates for visible and NIR surface-enhanced resonance Raman scattering under multiple laser lines (532, 633, and 785 nm) of excitation. In addition, we have found that NIMAs are ultrasensitive SERS-active substrates that can detect analytes (e.g., rhodamine 6G) at concentrations as low as 10(-15) M.

Controlling directed self-assembly of gold nanorods in patterned PS-b-PMMA thin films

We present a facile strategy for the directed self-assembly of gold nanorods (AuNRs) in patterned block copolymer (BCP) thin films. Parallel arrangement of AuNRs relative to the geometric confinement generated by selective removal of one block domain was achieved. Deposition of AuNRs with aspect ratios from 3.3 to 5.8 was accomplished and the alignment of the NRs within the channels was controlled primarily by capillary forces and the channel geometry. Ordered AuNR assembly in the BCP pattern can be achieved at high surface coverages, >30%, though the surface coverage depends on the aspect ratio of the NRs. Larger NRs align in the channels more readily, but pack at slightly lower densities.

Polyelectrolyte-coated gold nanorods and their biomedical applications

Gold nanorods (GNRs) have been extensively used in biomedical applications, because of their favourable optical properties. Their longitudinal surface plasmon resonance can be tuned, providing a strong near-infrared (NIR) extinction coefficient peak within the tissue transparency window. However, the modification of the surface of GNRs is essential before they can be used for biomedical applications. The number of GNRs taken up by cells and their biodistribution depend on their surface modification. Here, we review the recent advances in modifying GNR surfaces with polyelectrolytes for biomedical applications. Major polyelectrolytes used to coat GNR surfaces over the past few years and the biocompatibility of polyelectrolyte-coated GNRs are discussed.

Colorimetric detection of glutathione based on transverse overgrowth of high aspect ratio gold nanorods investigated by MCR-ALS

In this paper, we present a simple platform for colorimetric detection of glutathione using gold nanorods (AR ∼ 6.5 ± 0.2) as a plasmonic sensor.

A robust site-specific Au@SiO2@AgPt nanorod/nanodots superstructure for in situ SERS monitoring of catalytic reactions

A site-specific trimetallic Au@SiO₂@AgPt nanorod/nanodots superstructure can be fabricated to provide real-time SERS monitoring of catalytic reactions.