Microfluidic single-cell cultivation chip with controllable immobilization and selective release of yeast cells

Dielectrophoresis-Based Selective Droplet Extraction Microfluidic Device for Single-Cell Analysis

We developed a microfluidic device that enables selective droplet extraction from multiple droplet-trapping pockets based on dielectrophoresis. The device consists of a main microchannel, five droplet-trapping pockets with side channels, and drive electrode pairs appropriately located around the trapping pockets. Agarose droplets capable of encapsulating biological samples were successfully trapped in the trapping pockets due to the difference in flow resistance between the main and side channels. Target droplets were selectively extracted from the pockets by the dielectrophoretic force generated between the electrodes under an applied voltage of 500 V. During their extraction from the trapping pockets, the droplets and their contents were exposed to an electric field for 400-800 ms. To evaluate whether the applied voltage could potentially damage the biological samples, the growth rates of Escherichia coli cells in the droplets, with and without a voltage applied, were compared. No significant difference in the growth rate was observed. The developed device enables the screening of encapsulated single cells and the selective extraction of target droplets.

Defining atherosclerotic plaque biology by mass spectrometry-based omics approaches

Atherosclerosis is the principal cause of vascular diseases and one of the leading causes of worldwide death. Even though several insights into its natural course, risk factors and interventions have been identified, it is still an ongoing global pandemic. Since the structure and biochemical composition of the plaques show high heterogeneity, a comprehensive understanding of the intraplaque composition, its microenvironment, and the mechanisms of the progression and instability across different vascular beds at their progression stages is crucial for better risk stratification and treatment modalities. Even though several cell-based studies, animal studies, and extensive multicentric population studies have been conducted concerning cardiovascular diseases for assessing the risk factors and plaque biology, the studies on human clinical samples are very limited. New novel approaches utilize samples from percutaneous coronary interventions, which could possibly gain more access to clinical samples at different stages of the diseases without complex invasive resections. As an emerging technological platform in disease discovery research, mass spectrometry-based omics technologies offer capabilities for a comprehensive understanding of the mechanisms linked to several vascular diseases. Here, we discuss the cellular and molecular processes of atherosclerosis, different mass spectrometry-based omics approaches, and the studies mostly done on clinical samples of atheroma plaque using mass spectrometry-based proteomics, metabolomics and lipidomics approaches.

Novel Pumping Methods for Microfluidic Devices: A Comprehensive Review

This review is an account of methods that use various strategies to control microfluidic flow control with high accuracy. The reviewed systems are divided into two large groups based on the way they create flow: passive systems (non-mechanical systems) and active (mechanical) systems. Each group is presented by a number of device fabrications. We try to explain the main principles of operation, and we list advantages and disadvantages of the presented systems. Mechanical systems are considered in more detail, as they are currently an area of increased interest due to their unique precision flow control and "multitasking". These systems are often applied as mini-laboratories, working autonomously without any additional operations, provided by humans, which is very important under complicated conditions. We also reviewed the integration of autonomous microfluidic systems with a smartphone or single-board computer when all data are retrieved and processed without using a personal computer. In addition, we discuss future trends and possible solutions for further development of this area of technology.

Trapping and releasing of single microparticles and cells in a microfluidic chip

A microfluidic device was designed and fabricated to capture single microparticles and cells by using hydrodynamic force and selectively release the microparticles and cells of interest via negative dielectrophoresis by activating selected individual microelectrodes. The trap microstructure was optimized based on numerical simulation of the electric field as well as the flow field. The capture and selective release functions of the device were verified by multi-types microparticles with different diameters and K562 cells. The capture efficiencies/release efficiencies were 95.55% ± 0.43%/96.41% ± 1.08% and 91.34% ± 0.01%/93.67% ± 0.36% for microparticles and cells, respectively. By including more traps and microelectrodes, the device can achieve high throughput and realize the visual separation of microparticles/cells of interest in a large number of particle/cell groups.

Recent advances in microfluidic devices for single-cell cultivation: methods and applications

Single-cell analysis is essential to improve our understanding of cell functionality from cellular and subcellular aspects for diagnosis and therapy. Single-cell cultivation is one of the most important processes in single-cell analysis, which allows the monitoring of actual information of individual cells and provides sufficient single-cell clones and cell-derived products for further analysis. The microfluidic device is a fast-rising system that offers efficient, effective, and sensitive single-cell cultivation and real-time single-cell analysis conducted either on-chip or off-chip. Here, we introduce the importance of single-cell cultivation from the aspects of cellular and subcellular studies. We highlight the materials and structures utilized in microfluidic devices for single-cell cultivation. We further discuss biological applications utilizing single-cell cultivation-based microfluidics, such as cellular phenotyping, cell-cell interactions, and omics profiling. Finally, present limitations and future prospects of microfluidics for single-cell cultivation are also discussed.

In situ monitoring PUVA therapy by using a cell-array chip-based SERS platform

Psoralen ultraviolet A (PUVA) therapy has thrived as a promising treatment for psoriasis. However, overdose of PUVA treatment will cause side-effects, such as melanoma formation. And these side-effects are often ignored during PUVA therapy. Hence, in situ monitoring therapeutic response of PUVA therapy is important to minimize side-effects. Aberrant expression of tyrosinase (TYR) has been proved to be associated with melanoma, indicating that TYR is a potential target for evaluation of PUVA therapy. Herein, we reported a strategy for in situ monitoring TYR activity during PUVA therapy by using a cell-array chip-based SERS platform. The cell-array chip was used to simulate cell survival environment for cell culture. Capture of single cells and living cell analysis were realized in the isolated microchambers. An enzyme-induced core-shell self-assembly substrate was used to evaluate TYR activity in living cells during PUVA therapy. The gold nanoparticle modified with a SERS reporter, 4-mercaptobenzonitrile (4-MBN), was used as the core. In the presence of oxygen and TYR, hydroxylation of l-tyrosine occurred, leading to the reduction of silver ion on the surface of gold cores. The growth of silver shells was accompanied by the increased SERS intensity of the reporter, which is related directly to TYR activity. The detection limit for TYR activity is 0.45 U/mL. Upregulation of TYR activity was successfully monitored after PUVA therapy. Notably, real-time and in situ information of therapeutic response can be obtained through monitoring PUVA therapy by using a cell-array chip-based SERS platform, which has great potential to guide the clinical application of PUVA therapy.

Recent Advances in Electrical Impedance Sensing Technology for Single-Cell Analysis

Cellular heterogeneity is of significance in cell-based assays for life science, biomedicine and clinical diagnostics. Electrical impedance sensing technology has become a powerful tool, allowing for rapid, non-invasive, and label-free acquisition of electrical parameters of single cells. These electrical parameters, i.e., equivalent cell resistance, membrane capacitance and cytoplasm conductivity, are closely related to cellular biophysical properties and dynamic activities, such as size, morphology, membrane intactness, growth state, and proliferation. This review summarizes basic principles, analytical models and design concepts of single-cell impedance sensing devices, including impedance flow cytometry (IFC) to detect flow-through single cells and electrical impedance spectroscopy (EIS) to monitor immobilized single cells. Then, recent advances of both electrical impedance sensing systems applied in cell recognition, cell counting, viability detection, phenotypic assay, cell screening, and other cell detection are presented. Finally, prospects of impedance sensing technology in single-cell analysis are discussed.

Development of single-cell-level microfluidic technology for long-term growth visualization of living cultures of Mycobacterium smegmatis

Analysis of growth and death kinetics at single-cell resolution is a key step in understanding the complexity of the nonreplicating growth phenotype of the bacterial pathogen Mycobacterium tuberculosis. Here, we developed a single-cell-resolution microfluidic mycobacterial culture device that allows time-lapse microscopy-based long-term phenotypic visualization of the live replication dynamics of mycobacteria. This technology was successfully applied to monitor the real-time growth dynamics of the fast-growing model strain Mycobacterium smegmatis (M. smegmatis) while subjected to drug treatment regimens during continuous culture for 48 h inside the microfluidic device. A clear morphological change leading to significant swelling at the poles of the bacterial membrane was observed during drug treatment. In addition, a small subpopulation of cells surviving treatment by frontline antibiotics was observed to recover and achieve robust replicative growth once regular culture media was provided, suggesting the possibility of identifying and isolating nonreplicative mycobacteria. This device is a simple, easy-to-use, and low-cost solution for studying the single-cell phenotype and growth dynamics of mycobacteria, especially during drug treatment.

A microfluidic single-cell array for in situ laminar-flow-based comparative culturing of budding yeast cells

To facilitate in situ comparative culturing of budding yeast cells in a precisely controlled microenvironment, we developed a microfluidic single-cell array (MiSCA) with 96 traps (16 rows × 6 columns) for single-cell immobilization. Through optimization of the distances between neighboring traps and the applied flow rates by using a hydraulic equivalent circuit of the fluidic network, yeast cells were delivered to each column of the array by laminar focused flows and reliably captured at the traps by hydrodynamic forces with about 90% efficiency of cell immobilization. Immobilized cells in different columns within the same device can then be cultured in parallel while being exposed to different media and compounds delivered by laminar flows. For biological validation of the comparative cell-culturing device, we used budding yeast that can express yellow fluorescent protein upon the addition of β-estradiol in cell-culturing medium. Experimental results show successful induction of fluorescence in cells immobilized in desired columns that have been dosed with β-estradiol. The MiSCA system allows for performing sets of experiments and control experiments in parallel in the same device, or for executing comparative experiments under well-defined laminar-perfusion conditions with different media, as well as in situ monitoring of dynamic cellular responses upon different analytical compounds or reagents for single-cell analysis.

Investigation of daughter cell dissection coincidence of single budding yeast cells immobilized in microfluidic traps

Microfluidic methodologies allow for automatic and high-throughput replicative lifespan (RLS) determination of single budding yeast cells. However, the resulted RLS is highly impacted by the robustness of experimental conditions, especially the microfluidic yeast-trapping structures, which are designed for cell retention, growth, budding, and daughter cell dissection. In this work, four microfluidic yeast-trapping structures, which were commonly used to immobilize mother cells and remove daughter cells for entire lifespan of budding yeast, were systematically investigated by means of finite element modeling (FEM). The results from this analysis led us to propose an optimized design, the yeast rotation (YRot) trap, which is a "leaky bowl"-shaped structure composed of two mirrored microcolumns facing each other. The YRot trap enables stable retention of mother cells in its "bowl" and hydrodynamic rotation of buds into its "leaky orifice" such that matured progenies can be dissected in a coincident direction. We validated the functions of the YRot trap in terms of cell rotation and daughter dissection by both FEM simulations and experiments. With the integration of denser YRot traps in microchannels, the microfluidic platform with stable single-yeast immobilization, long-term cell culturing, and coincident daughter dissection could potentially improve the robustness of experimental conditions for precise RLS determination in yeast aging studies.

Open software platform for automated analysis of paper-based microfluidic devices

Development of paper-based microfluidic devices that perform colorimetric measurements requires quantitative image analysis. Because the design geometries of paper-based microfluidic devices are not standardized, conventional methods for performing batch measurements of regularly spaced areas of signal intensity, such as those for well plates, cannot be used to quantify signal from most of these devices. To streamline the device development process, we have developed an open-source program called ColorScan that can automatically recognize and measure signal-containing zones from images of devices, regardless of output zone geometry or spatial arrangement. This program, which measures color intensity with the same accuracy as standard manual approaches, can rapidly process scanned device images, simultaneously measure identified output zones, and effectively manage measurement results to eliminate requirements for time-consuming and user-dependent image processing procedures.

Selective Retrieval of Individual Cells from Microfluidic Arrays Combining Dielectrophoretic Force and Directed Hydrodynamic Flow

Hydrodynamic-based microfluidic platforms enable single-cell arraying and analysis over time. Despite the advantages of established microfluidic systems, long-term analysis and proliferation of cells selected in such devices require off-chip recovery of cells as well as an investigation of on-chip analysis on cell phenotype, requirements still largely unmet. Here, we introduce a device for single-cell isolation, selective retrieval and off-chip recovery. To this end, singularly addressable three-dimensional electrodes are embedded within a microfluidic channel, allowing the selective release of single cells from their trapping site through application of a negative dielectrophoretic (DEP) force. Selective capture and release are carried out in standard culture medium and cells can be subsequently mitigated towards a recovery well using micro-engineered hybrid SU-8/PDMS pneumatic valves. Importantly, transcriptional analysis of recovered cells revealed only marginal alteration of their molecular profile upon DEP application, underscored by minor transcriptional changes induced upon injection into the microfluidic device. Therefore, the established microfluidic system combining targeted DEP manipulation with downstream hydrodynamic coordination of single cells provides a powerful means to handle and manipulate individual cells within one device.

Cost-effective fabrication of photopolymer molds with multi-level microstructures for PDMS microfluidic device manufacture

This paper describes a methodology of photopolymer mold fabrication with multi-level microstructures for polydimethylsiloxane (PDMS) microfluidic device manufacture.

Multiplexing microelectrodes for dielectrophoretic manipulation and electrical impedance measurement of single particles and cells in a microfluidic device

This work presents a microfluidic device, which was patterned with (i) microstructures for hydrodynamic capture of single particles and cells, and (ii) multiplexing microelectrodes for selective release via negative dielectrophoretic (nDEP) forces and electrical impedance measurements of immobilized samples. Computational fluid dynamics (CFD) simulations were performed to investigate the fluidic profiles within the microchannels during the hydrodynamic capture of particles and evaluate the performance of single-cell immobilization. Results showed uniform distributions of velocities and pressure differences across all eight trapping sites. The hydrodynamic net force and the nDEP force acting on a 6 μm sphere were calculated in a 3D model. Polystyrene beads with difference diameters (6, 8, and 10 μm) and budding yeast cells were employed to verify multiple functions of the microfluidic device, including reliable capture and selective nDEP-release of particles or cells and sensitive electrical impedance measurements of immobilized samples. The size of immobilized beads and the number of captured yeast cells can be discriminated by analyzing impedance signals at 1 MHz. Results also demonstrated that yeast cells can be immobilized at single-cell resolution by combining the hydrodynamic capture with impedance measurements and nDEP-release of unwanted samples. Therefore, the microfluidic device integrated with multiplexing microelectrodes potentially offers a versatile, reliable, and precise platform for single-cell analysis.

Cell Injection Millirobot Development and Evaluation in Microfluidic Chip

We propose an innovative design of millirobot, which can achieve donor cell suction, delivery, and injection in a mammalian oocyte on a microfluidic chip. The millirobot body contains a hollow space that produces suction and ejection forces for the injection of cell nuclei using a nozzle at the tip of the robot. Specifically, a controller changes the hollow volume by balancing the magnetic and elastic forces of a membrane along with the motion of stages in the XY plane. A glass capillary attached to the tip of the robot contains a nozzle that is able to absorb and inject cell nuclei. The millirobot provides three degrees of freedom and generates micronewton forces. We demonstrate the effectiveness of the proposed millirobot through an experiment of the absorption and ejection of 20-µm particles from the nozzle using magnetic control in a microfluidic chip.

Microstructure guided multi-scale liquid patterning on an open surface

Liquid patterning is a quintessential aspect in cell-based screening. While there are a variety of methods to handle microliquids utilizing surface treatments, complex microfluidic systems, and automated dispensing, most of the stated methods are both expensive and difficult to implement. Here, we present a fast multi-scale microliquid-patterning method on an open surface using embossed microstructures without surface modification. Arrays of micropillars can trap microliquids when a bulk drop is swept by an elastic sweeper on polystyrene (PS) substrates. The patterning mechanism on a basic form of a 2 × 2 rectangular array of circular pillars is analyzed theoretically and verified with experiments. Nanoliter-to-microliter volumes of liquids are patterned into various shapes by arranging the pillars based on the analysis. Furthermore, an array of geometrically modified pillars can capture approximately 8000 droplets on a large substrate (55 mm × 55 mm) in one step. Given the simplistic method of wipe patterning, the proposed platform can be utilized in both manual benchtop and automated settings. We will provide proof of concept experiments of single colony isolation using nanoliter-scale liquid patterning and of human angiogenic vessel formation using sequential patterning of microliter-scale liquids.

Sequencing of human genomes extracted from single cancer cells isolated in a valveless microfluidic device

Sequencing the genomes of individual cells enables the direct determination of genetic heterogeneity amongst cells within a population. We have developed an injection-moulded valveless microfluidic device in which single cells from colorectal cancer derived cell lines (LS174T, LS180 and RKO) and fresh colorectal tumors have been individually trapped, their genomes extracted and prepared for sequencing using multiple displacement amplification (MDA). Ninety nine percent of the DNA sequences obtained mapped to a reference human genome, indicating that there was effectively no contamination of these samples from non-human sources. In addition, most of the reads are correctly paired, with a low percentage of singletons (0.17 ± 0.06%) and we obtain genome coverages approaching 90%. To achieve this high quality, our device design and process shows that amplification can be conducted in microliter volumes as long as the lysis is in sub-nanoliter volumes. Our data thus demonstrates that high quality whole genome sequencing of single cells can be achieved using a relatively simple, inexpensive and scalable device. Detection of genetic heterogeneity at the single cell level, as we have demonstrated for freshly obtained single cancer cells, could soon become available as a clinical tool to precisely match treatment with the properties of a patient's own tumor.

Electron beam lithography of poly(glycidol) nanogels for immobilization of a three-enzyme cascade

Nanogels devices with spatial confinement of multiple enzymes resulted in retention of bioactivity after 30 days with a 5 fold higher chromogenic output compared to free enzyme cascade devices.

Quantitative investigation of MDA-MB-231 breast cancer cell motility: dependence on epidermal growth factor concentration and its gradient

Enhanced cell motility is one of the primary features of cancer. Accumulated evidence demonstrates that Epidermal Growth Factor Receptor (EGFR) mediated pathways play an important role in breast cancer cell proliferation and migration. We have quantified the MDA-MB-231 breast cancer cell migration in response to the stimulation of EGFR pathways with their ligand EGF to determine how the cell motility of MDA-MB-231 cells depends on the ligand concentration and gradient. Analysis at the single cell level combined with mathematical modeling and the ability to vary the ligand concentration and gradients locally using microfluidic devices allowed us to separate the unique contributions of ligand concentration and ligand gradient to cell motility. We tracked the motility of 6600 cells individually using time lapse imaging under varying EGF stimulation conditions. Trajectory analysis of the tracked cells using non-linear multivariate regression models showed that: (i) cell migration of MDA-MB-231 breast cancer cells depends on the ligand gradient but not on the ligand concentration. This observation was valid for both the total (direction independent) and directed (along gradient direction) cell velocities. Although the dependence of the directed motility on ligand gradient is to be expected, the dependence of the total velocity solely on ligand gradient was an unexpected novel observation. (ii) Enhancement of the motilities of individual cells in a population upon exposure to the ligand was highly heterogeneous, and only a very small percentage of cells responded strongly to the external stimuli. Separating out the non-responding cells using quantitative analysis of individual cell motilities enabled us to establish that enhanced motility of the responding cells indeed increases monotonically with increasing EGF gradient. (iii) A large proportion of cells in a population were unresponsive to ligand stimulation, and their presence introduced considerable random intrinsic variability to the observations. This indicated that studying cell motilities at the individual cell level is necessary to better capture the biological reality and that population averaging methods should be avoided. Studying motilities at the individual cell level is particularly important to understand the biological processes that are possibly driven by the action of a small portion of cells in a population, such as metastasis. We discuss the implications of our results on the total and chemotactic movement of cancer cells in the tumor microenvironment.

Automatic and Selective Single Cell Manipulation in a Pressure-Driven Microfluidic Lab-On-Chip Device

A microfluidic lab-on-chip device was developed to automatically and selectively manipulate target cells at the single cell level. The device is composed of a microfluidic chip, mini solenoid valves with negative-pressurized soft tubes, and a LabView^®-based data acquisition device. Once a target cell passes the resistive pulse sensing gate of the microfluidic chip, the solenoid valves are automatically actuated and open the negative-pressurized tubes placed at the ends of the collecting channels. As a result, the cell is transported to that collecting well. Numerical simulation shows that a 0.14 mm³ volume change of the soft tube can result in a 1.58 mm/s moving velocity of the sample solution. Experiments with single polystyrene particles and cancer cells samples were carried out to demonstrate the effectiveness of this method. Selectively manipulating a certain size of particles from a mixture solution was also achieved. Due to the very high pressure-driven flow switching, as many as 300 target cells per minute can be isolated from the sample solution and thus is particularly suitable for manipulating very rare target cells. The device is simple, automatic, and label-free and particularly suitable for isolating single cells off the chip one by one for downstream analysis.

A microfluidic chip for screening individual cancer cells via eavesdropping on autophagy-inducing crosstalk in the stroma niche

Autophagy is a cellular homeostatic mechanism where proteins and organelles are digested and recycled to provide an alternative source of building blocks and energy to cells. The role of autophagy in cancer microenvironment is still poorly understood. Here, we present a microfluidic system allowing monitoring of the crosstalk between single cells. We used this system to study how tumor cells induced autophagy in the stromal niche. Firstly, we could confirm that transforming growth factor β1 (TGFβ1) secreted from breast tumor cells is a paracrine mediator of tumor-stroma interaction leading to the activation of autophagy in the stroma component fibroblasts. Through proof of concept experiments using TGFβ1 as a model factor, we could demonstrate real time monitoring of autophagy induction in fibroblasts by single tumor cells. Retrieval of individual tumor cells from the microfluidic system and their subsequent genomic analysis was possible, allowing us to determine the nature of the factor mediating tumor-stroma interactions. Therefore, our microfluidic platform might be used as a promising tool for quantitative investigation of tumor–stroma interactions, especially for and high-throughput screening of paracrine factors that are secreted from heterogeneous tumor cell populations.

In situ mRNA isolation from a microfluidic single-cell array using an external AFM nanoprobe

We present an in situ mRNA extraction platform to quantify marker-genes' expression levels of single target cells within high-density microfluidic trapping arrays. This platform enables single-cell transcriptomic analysis to reveal in-depth information of cellular mechanisms and population heterogeneity. Although microfluidic technology enables the automation of single-cell sorting, trapping and identification, most developed microfluidic devices are closed off and prevent single-cell access by external analytical equipment. Besides, cell lysing is usually required for mRNA extraction. In our platform, cells are trapped individually in a microwell array sealed by a 1 μm-thick polydimethylsiloxane (PDMS) membrane, and a modified atomic force microscopy (AFM) probe-a dielectrophoretic nanotweezer (DENT)-penetrates through the membrane and extracts mRNA molecules from a single cell by dielectrophoresis. The single-cellular expression levels of 3 housekeeping genes from HeLa cells were analyzed quantitatively based on the quantification of the extracted mRNAs, and the probed cells remained viable when the applied alternating-current (AC) voltage was lower than 1.5 V_pp during mRNA probing. We also performed in situ mRNA isolation from a mixture of SK-BR-3 and U937 cells, mimicking a blood sample that underwent primary enrichment of circulating tumor cells (CTCs), and evaluated various marker-genes' expressions. This integrated platform combines the non-destructive and precise-control of a single-cell mRNA probe with sealed microfluidic systems' capability of upstream sample processing and downstream multifunctional analysis to enable a versatile and powerful tool for biomedical research.

A Versatile Bonding Method for PDMS and SU-8 and Its Application towards a Multifunctional Microfluidic Device

This paper reports a versatile and irreversible bonding method for poly(dimethylsiloxane) (PDMS) and SU-8. The method is based on epoxide opening and dehydration reactions between surface-modified PDMS and SU-8. A PDMS replica is first activated via the low-cost lab equipment, i.e., the oxygen plasma cleaner or the corona treater. Then both SU-8 and plasma-treated PDMS samples are functionalized using hydrolyzed (3-aminopropyl)triethoxysilane (APTES). Ultimately, the samples are simply brought into contact and heated to enable covalent bonding. The molecular coupling and chemical reactions behind the bonding occurring at the surfaces were characterized by water contact angle measurement and X-ray photoelectron spectroscopy (XPS) analysis. The reliability of bonded PDMS-SU-8 samples was examined by using tensile strength and leakage tests, which revealed a bonding strength of over 1.4 MPa. The presented bonding method was also applied to create a metal-SU-8-PDMS hybrid device, which integrated SU-8 microfluidic structures and microelectrodes. This hybrid system was used for the effective trapping of microparticles on-chip, and the selective releasing and identification of predefined trapped microparticles. The hybrid fabrication approach presented here, based on the PDMS-SU-8 bonding, enables multifunctional integration in complex microfluidic devices.

Construction of single-cell arrays and assay of cell drug resistance in an integrated microfluidic platform

The cellular heterogeneity of tumors has played important roles in various tumor-related research areas and applications such as the cellular biology, metastasis and clinical diagnosis of tumors. Although several microfluidics-based single-cell separation and analysis techniques have been used in research into the cellular heterogeneity of tumors, further investigation is still required for studying the effect of the biomechanical (e.g., size and deformability) heterogeneity of cells on their biological characteristics (e.g., drug resistance and tumor-initiating features). Here, we established an integrated microfluidic platform for the construction of single-cell arrays and analysis of drug resistance. Using this device, high-throughput single-cell arrays could be easily obtained according to the biomechanical (size and deformability) heterogeneity of cells. To demonstrate the capability of the microfluidic platform, a proof-of-concept experiment was implemented by determining the vincristine resistance of single glioblastoma cells with different biomechanical properties. The results indicated that the biomechanics of tumor cells had significant implications for cell drug resistance; that is, small and/or more deformable tumor cells had higher drug resistance than large and/or less deformable tumor cells. This device provides a new approach for the isolation of single cells according to the different biomechanical properties of cells. Also, it possesses practical potential for studies of tumors on a single-cell level.

Automated, Multiplexed Electrical Impedance Spectroscopy Platform for Continuous Monitoring of Microtissue Spheroids

Microtissue spheroids in microfluidic devices are increasingly used to establish novel in vitro organ models of the human body. As the spheroids are comparably sizable, it is difficult to monitor larger numbers of them by optical means. Therefore, electrical impedance spectroscopy (EIS) emerges as a viable alternative to probing spheroid properties. Current spheroid EIS systems are, however, not suitable for investigating multiple spheroids in parallel over extended time in an automated fashion. Here we address this issue by presenting an automated, multiplexed EIS (AMEIS) platform for impedance analysis in a microfluidic setting. The system was used to continuously monitor the effect of the anticancer drug fluorouracil (5-FU) on HCT116 cancer spheroids. Simultaneous EIS monitoring of up to 15 spheroids was performed in parallel over 4 days at a temporal resolution of 2 min without any need for pumps. The measurements were continuous in nature, and the setup was kept in a standard incubator under controlled conditions during the measurements. A baseline normalization method to improve robustness and to reduce the influence of slow changes in the medium conductivity on the spheroid EIS readings has been developed and validated by experiments and means of a finite-element model. The same method and platform was then used for online monitoring of cardiac spheroids. The beating frequency of each cardiac spheroid could be read out in a completely automated fashion. The developed system constitutes a promising method for simultaneously evaluating drug impact and/or toxic effects on multiple microtissue spheroids.

Optical Manipulation of Single Magnetic Beads in a Microwell Array on a Digital Microfluidic Chip

The detection of single molecules in magnetic microbead microwell array formats revolutionized the development of digital bioassays. However, retrieval of individual magnetic beads from these arrays has not been realized until now despite having great potential for studying captured targets at the individual level. In this paper, optical tweezers were implemented on a digital microfluidic platform for accurate manipulation of single magnetic beads seeded in a microwell array. Successful optical trapping of magnetic beads was found to be dependent on Brownian motion of the beads, suggesting a 99% chance of trapping a vibrating bead. A tailor-made experimental design was used to screen the effect of bead type, ionic buffer strength, surfactant type, and concentration on the Brownian activity of beads in microwells. With the optimal conditions, the manipulation of magnetic beads was demonstrated by their trapping, retrieving, transporting, and repositioning to a desired microwell on the array. The presented platform combines the strengths of digital microfluidics, digital bioassays, and optical tweezers, resulting in a powerful dynamic microwell array system for single molecule and single cell studies.

Electrical Impedance Spectroscopy for Microtissue Spheroid Analysis in Hanging-Drop Networks

Electrical impedance spectroscopy (EIS) as a label free and noninvasive analysis method receives growing attention for monitoring three-dimensional tissue constructs. In this Article, we present the integration of an EIS readout function into the hanging-drop network platform, which has been designed for culturing microtissue spheroids in perfused multitissue configurations. Two pairs of microelectrodes have been implemented directly in the support of the hanging drops by using a small glass inlay inserted in the microfluidic structure. The pair of bigger electrodes is sensitive to the drop size and allows for drop size control over time. The pair of smaller electrodes is capable of monitoring, on the one hand, the size of microtissue spheroids to follow, for example, the growth of cancer microtissues, and, on the other hand, the beating of cardiac microtissues in situ. The presented results demonstrate the feasibility of an EIS readout within the framework of multifunctional hanging-drop networks.

A highly addressable static droplet array enabling digital control of a single droplet at pico-volume resolution

Droplet-based microfluidics enabling exquisite liquid-handling has been developed for diagnosis, drug discovery and quantitative biology. Compartmentalization of samples into a large number of tiny droplets is a great approach to perform multiplex assays and to improve reliability and accuracy using a limited volume of samples. Despite significant advances in microfluidic technology, individual droplet handling in pico-volume resolution is still a challenge in obtaining more efficient and varying multiplex assays. We present a highly addressable static droplet array (SDA) enabling individual digital manipulation of a single droplet using a microvalve system. In a conventional single-layer microvalve system, the number of microvalves required is dictated by the number of operation objects; thus, individual trap-and-release on a large-scale 2D array format is highly challenging. By integrating double-layer microvalves, we achieve a "balloon" valve that preserves the pressure-on state under released pressure; this valve can allow the selective releasing and trapping of 7200 multiplexed pico-droplets using only 1 μL of sample without volume loss. This selectivity and addressability completely arranged only single-cell encapsulated droplets from a mixture of droplet compositions via repetitive selective trapping and releasing. Thus, it will be useful for efficient handling of miniscule volumes of rare or clinical samples in multiplex or combinatory assays, and the selective collection of samples.

Time-lapse electrical impedance spectroscopy for monitoring the cell cycle of single immobilized S. pombe cells

As a complement and alternative to optical methods, wide-band electrical impedance spectroscopy (EIS) enables multi-parameter, label-free and real-time detection of cellular and subcellular features. We report on a microfluidics-based system designed to reliably capture single rod-shaped Schizosaccharomyces pombe cells by applying suction through orifices in a channel wall. The system enables subsequent culturing of immobilized cells in an upright position, while dynamic changes in cell-cycle state and morphology were continuously monitored through EIS over a broad frequency range. Besides measuring cell growth, clear impedance signals for nuclear division have been obtained. The EIS system has been characterized with respect to sensitivity and detection limits. The spatial resolution in measuring cell length was 0.25 μm, which corresponds to approximately a 5-min interval of cell growth under standard conditions. The comprehensive impedance data sets were also used to determine the occurrence of nuclear division and cytokinesis. The obtained results have been validated through concurrent confocal imaging and plausibilized through comparison with finite-element modeling data. The possibility to monitor cellular and intracellular features of single S. pombe cells during the cell cycle at high spatiotemporal resolution renders the presented microfluidics-based EIS system a suitable tool for dynamic single-cell investigations.

Measurement of the light scattering of single micrometer-sized particles captured with a microfluidic trap

Light scattering detection of a single particle is significant to both theoretical developments and application progresses of particle scattering. In this work, a new method employing the polydimethylsiloxane microfluidic catcher with self-regulation was developed to detect the light scattering of an individual micro particle (20.42, 23.75, and 31.10 μm) in a wide angular range. This system can rapidly (<2 min) immobilize single particles without aggregations and continuously analyze its light scattering ranging from 2° to 162°. The high success ratio of the capture, good agreement with the anticipation, and moderate time and cost make this method a promising candidate in single-particle-scattering applications.

Integration of a microfluidic chip with a size-based cell bandpass filter for reliable isolation of single cells

We report a simple, efficient microfluidic array system for reliable isolation of cells. A microfluidic array chip, integrated with a size-based cell bandpass filter, provides the unprecedented capability of organizing single cells from a population containing a wide distribution of sizes.

A high-throughput microfluidic single-cell screening platform capable of selective cell extraction

Microfluidic devices and lab-on-a-chip technologies have been extensively used in high-throughput single-cell analysis applications using their capability to precisely manipulate cells as well as their microenvironment. Although significant technological advances have been made in single-cell capture, culture, and analysis techniques, most microfluidic systems cannot selectively retrieve samples off-chip for additional examinations. Being able to retrieve target cells of interest from large arrays of single-cell culture compartments is especially critical in achieving high-throughput single-cell screening applications, such as a mutant library screening. We present a high-throughput microfluidic single-cell screening platform capable of investigating cell properties, such as growth and biomolecule production, followed by selective extraction of particular cells showing desired traits to off-chip reservoirs for sampling or further analysis. The developed platform consists of 1024 single-cell trapping/culturing sites, where opening and closing of each trap can be individually controlled with a microfluidic OR logic gate. By opening only a specific site out of the 1024 trapping sites and applying backflow, particular cells of interest could be selectively released and collected off-chip. Using a unicellular microalga Chlamydomonas reinhardtii, single-cell capture and selective cell extraction capabilities of the developed platform were successfully demonstrated. The growth profile and intracellular lipid accumulation of the cells were also analyzed inside the platform, where 6-8 hours of doubling time and on-chip stained lipid bodies were successfully identified, demonstrating the compatibility of the system for cell culture and fluorescent tagging assays.

Digital microfluidics for time-resolved cytotoxicity studies on single non-adherent yeast cells

Single cell analysis (SCA) has gained increased popularity for elucidating cellular heterogeneity at genomic, proteomic and cellular levels. Flow cytometry is considered as one of the most widely used techniques to characterize single cell responses; however, its inability to analyse cells with spatio-temporal resolution poses a major drawback. Here, we introduce a digital microfluidic (DMF) platform as a useful tool for conducting studies on isolated yeast cells in a high-throughput fashion. The reported system exhibits (i) a microwell array for trapping single non-adherent cells by shuttling a cell-containing droplet over the array, and allows (ii) implementation of high-throughput cytotoxicity assays with enhanced spatio-temporal resolution. The system was tested for five different concentrations of the antifungal drug Amphotericin B, and the cell responses were monitored over time by time lapse fluorescence microscopy. The DMF platform was validated by bulk experiments, which mimicked the DMF experimental design. A correlation analysis revealed that the results obtained on the DMF platform are not significantly different from those obtained in bulk; hence, the DMF platform can be used as a tool to perform SCA on non-adherent cells, with spatio-temporal resolution. In addition, no external forces, other than the physical forces generated by moving the droplet, were used to capture single cells, thereby avoiding cell damage. As such, the information on cellular behaviour during treatment could be obtained for every single cell over time making this platform noteworthy in the field of SCA.

Review of methods to probe single cell metabolism and bioenergetics

Single cell investigations have enabled unexpected discoveries, such as the existence of biological noise and phenotypic switching in infection, metabolism and treatment. Herein, we review methods that enable such single cell investigations specific to metabolism and bioenergetics. Firstly, we discuss how to isolate and immobilize individuals from a cell suspension, including both permanent and reversible approaches. We also highlight specific advances in microbiology for its implications in metabolic engineering. Methods for probing single cell physiology and metabolism are subsequently reviewed. The primary focus therein is on dynamic and high-content profiling strategies based on label-free and fluorescence microspectroscopy and microscopy. Non-dynamic approaches, such as mass spectrometry and nuclear magnetic resonance, are also briefly discussed.

Real-time monitoring of immobilized single yeast cells through multifrequency electrical impedance spectroscopy

We present a microfluidic device, which enables single cells to be reliably trapped and cultivated while simultaneously being monitored by means of multifrequency electrical impedance spectroscopy (EIS) in the frequency range of 10 kHz-10 MHz. Polystyrene beads were employed to characterize the EIS performance inside the microfluidic device. The results demonstrate that EIS yields a low coefficient of variation in measuring the diameters of captured beads (~0.13%). Budding yeast, Saccharomyces cerevisiae, was afterwards used as model organism. Single yeast cells were immobilized and measured by means of EIS. The bud growth was monitored through EIS at a temporal resolution of 1 min. The size increment of the bud, which is difficult to determine optically within a short time period, can be clearly detected through EIS signals. The impedance measurements also reflect the changes in position or motion of single yeast cells in the trap. By analyzing the multifrequency EIS data, cell motion could be qualitatively discerned from bud growth. The results demonstrate that single-cell EIS can be used to monitor cell growth, while also detecting potential cell motion in real-time and label-free approach, and that EIS constitutes a sensitive tool for dynamic single-cell analysis.

An electrostatic microwell-based biochip for phytoplanktonic cell trapping

A simple microwell-based microfluidic chip for microalgal cells trapping was fabricated. An electrostaticcell trapping mechanism, enabled by a positively charged glass surface, was used. The chip was capable of capturing multiple algal cell types. In the case of filamentous Spirulina platensis, we observed single filament occupancy of up to ∼30% available wells, as high as some previously proposed methods. Captured filaments were not of any preferential size, suggesting well randomized cell trapping. It was found that the electrostatic attraction did not affect the cell growth. Total replacement of liquid inside the wells could be achieved by pumping new solutions via the inlet, making single cell experiments in controlled chemical conditions possible. After the top layer of the chip was removed, cells in the wells could be simply transferred using a micropipette, turning the chip into a platform for strain selection.

Nanofluidic devices towards single DNA molecule sequence mapping

Nanofluidics enables the imaging of stretched single molecules with potential applications for single molecule sequence mapping. Lab-on-a-chip devices for single cell trapping and lyzing, genomic DNA extraction from single cells, and optical mapping of genomic length DNA has been demonstrated separately. Yet the pursuit for applying DNA optical mapping to solve real genomics challenges is still to come. We review lab-on-a-chip devices from literature that could be part of a complete system for the sequence mapping of single DNA molecules.