A spiropyran-based polymer with a stimulus response to water temperature and water content

Temperature-responsive spiropyran-functionalized polymers usually require a thermo-sensitive polymer. However, their temperature response range is limited by the lower critical solution temperature (LCST) of the thermo-sensitive polymer, which does not exceed 37 °C. In this work, a hydrophilic polymer (PHEA-SP) sheet was prepared by photo-initiated copolymerization of hydroxyethyl acrylate (HEA) and a spiropyran crosslinking agent (SP). In water, swelling and hydrogen bonding can increase the ring-opening isomerization probability of spiropyran at the PHEA-SP crosslinking point, thus amplifying the discoloration of spiropyran induced by temperature change. PHEA-SP is very responsive to water temperature in the range of 25-55 °C, due to the amplification of spiropyranoid discoloration described above. This method avoids the dependence of the temperature responsive spiropyran-functionalized polymer on a thermo-sensitive polymer and additional UV light, while increasing the upper limit of the water temperature response to 55 °C. In addition, PHEA-SP also shows responsivity to water content in ethanol solution from 0.3% to 100%.

Tailor-made Glycopolymers via Reversible Deactivation Radical Polymerization: Design, Properties and Applications

Investigating the underlying mechanism of biological interactions using glycopolymer is becoming increasingly important owing to their unique recognition properties. The multivalent interactions between lectin and glycopolymer are significantly influenced by...

Construction of Highly Ordered Glyco-Inside Nano-Assemblies through RAFT Dispersion Polymerization of Galactose-Decorated Monomer

Glyco-assemblies derived from amphiphilic sugar-decorated block copolymers (ASBCs) have emerged prominently due to their wide application, for example, in biomedicine and as drug carriers. However, to efficiently construct these glyco-assemblies is still a challenge. Herein, we report an efficient technology for the synthesis of glyco-inside nano-assemblies by utilizing RAFT polymerization of a galactose-decorated methacrylate for polymerization-induced self-assembly (PISA). Using this approach, a series of highly ordered glyco-inside nano-assemblies containing intermediate morphologies were fabricated by adjusting the length of the hydrophobic glycoblock and the polymerization solids content. A specific morphology of complex vesicles was captured during the PISA process and the formation mechanism is explained by the morphology of its precursor and intermediate. Thus, this method establishes a powerful route to fabricate glyco-assemblies with tunable morphologies and variable sizes, which is significant to enable the large-scale fabrication and wide application of glyco-assemblies.

Functionalization of amine-cured epoxy resins by boronic acids based on dynamic dioxazaborocane formation

Functionalization of epoxy resins after curing was performed based on dynamic dioxazaborocane formation between intrinsic diethanolamine units in amine-cured epoxy resins and boronic acid modifiers.

Micellization of Photo-Responsive Block Copolymers

This review focuses on block copolymers featuring different photo-responsive building blocks and self-assembly of such materials in different selective solvents. We have subdivided the specific examples we selected: (1) according to the wavelength at which the irradiation has to be carried out to achieve photo-response; and (2) according to whether irradiation with light of a suitable wavelength leads to reversible or irreversible changes in material properties (e.g., solubility, charge, or polarity). Exemplarily, an irreversible change could be the photo-cleavage of a nitrobenzyl, pyrenyl or coumarinyl ester, whereas the photo-mediated transition between spiropyran and merocyanin form as well as the isomerization of azobenzenes would represent reversible response to light. The examples presented cover applications including drug delivery (controllable release rates), controlled aggregation/disaggregation, sensing, and the preparation of photochromic hybrid materials.

RAFT synthesis and micellization of a photo-, temperature- and pH-responsive diblock copolymer based on spiropyran

A photo-, temperature- and pH-responsive diblock copolymer containing a rigid spiropyran moiety was synthesized and its micellization was investigated.

Photo-responsive polymers: synthesis and applications

Photo-responsive polymers are able to change their structure, conformation and properties upon light irradiation.

Reaction-Driven Self-Assembled Micellar Nanoprobes for Ratiometric Fluorescence Detection of CS2 with High Selectivity and Sensitivity

The detection of highly toxic CS2, which is known as a notorious occupational hazard in various industrial processes, is important from both environmental and public safety perspectives. We describe here a robust type of chemical-reaction-based supramolecular fluorescent nanoprobes for ratiometric determination of CS2 with high selectivity and sensitivity in water medium. The micellar nanoprobes self-assemble from amphiphilic pyrene-modified hyperbranched polyethylenimine (Py-HPEI) polymers with intense pyrene excimer emission. Selective sensing is based on a CS2-specific reaction with hydrophilic amino groups to produce hydrophobic dithiocarbamate moieties, which can strongly quench the pyrene excimer emission via a known photoinduced electron transfer (PET) mechanism. Therefore, the developed micellar nanoprobes are free of the H2S interference problem often encountered in the widely used colorimetric assays and proved to show high selectivity over many potentially competing chemical species. Importantly, the developed approach is capable of CS2 sensing even in complex tap and river water samples. In addition, in view of the modular design principle of these powerful micellar nanoprobes, the sensing strategy used here is expected to be applicable to the development of various sensory systems for other environmentally important guest species.

Spiropyran-based dynamic materials

In the past few years, spiropyran has emerged as the molecule-of-choice for the construction of novel dynamic materials. This unique molecular switch undergoes structural isomerisation in response to a variety of orthogonal stimuli, e.g. light, temperature, metal ions, redox potential, and mechanical stress. Incorporation of this switch onto macromolecular supports or inorganic scaffolds allows for the creation of robust dynamic materials. This review discusses the synthesis, switching conditions, and use of dynamic materials in which spiropyran has been attached to the surfaces of polymers, biomacromolecules, inorganic nanoparticles, as well as solid surfaces. The resulting materials show fascinating properties whereby the state of the switch intimately affects a multitude of useful properties of the support. The utility of the spiropyran switch will undoubtedly endow these materials with far-reaching applications in the near future.