New derivatives from dehydrodieugenol B and its methyl ether displayed high anti-Trypanosoma cruzi activity and cause depolarization of the plasma membrane and collapse the mitochondrial membrane potential

In the present work, dehydrodieugenol B (1) and its methyl ether (2), isolated from Nectandra leucantha twigs, were used as starting material for the preparation of two new derivatives (1a and 2a) containing an additional methoxycarbonyl unit on allyl side chains. Compounds 1a and 2a demonstrated activity against trypomastigotes (EC₅₀ values of 13.5 and 23.0 μM, respectively) and against intracellular amastigotes (EC₅₀ values of 10.2 and 6.1 μM, respectively). Additionally, compound 2a demonstrated no mammalian cytotoxicity up to 200 μM whereas compound 1a exhibited a CC₅₀ value of 139.8 μM. The mechanism of action studies of compounds 1a and 2a demonstrated a significant depolarization of the plasma membrane potential in trypomastigotes, followed by a mitochondrial membrane potential collapse. Neither calcium level nor reactive oxygen species alterations were observed after a short-time incubation. Considering the potential of compound 2a against T. cruzi and its simple preparation from the natural product 2, isolated from N. leucantha, this compound could be considered a new hit for future drug design studies in Chagas disease.

Methylene Capping Facilitates Cross-Metathesis Reactions of Enals: A Short Synthesis of 7-Methoxywutaifuranal from the Xylochemical Isoeugenol

Four combinations of type-I olefins isoeugenol and 4-hydroxy-3-methoxystyrene with type-II olefins acrolein and crotonaldehyde were investigated in cross-metathesis (CM) reactions. While both type-I olefins are suitable CM partners for this transformation, we observed synthetically useful conversions only with type-II olefin crotonaldehyde. For economic reasons, isoeugenol, a cheap xylochemical available from renewable lignocellulose or from clove oil, is the preferred type-I CM partner. Nearly quantitative conversions to coniferyl aldehyde by the CM reaction of isoeugenol and crotonaldehyde can be obtained at ambient temperature without a solvent or at high substrate concentrations of 2 mol·L^-1 with the second-generation Hoveyda-Grubbs catalyst. Under these conditions, the ratio of reactants can be reduced to 1:1.5 and catalyst loadings as low as 0.25 mol % are possible. The high reactivity of the isoeugenol/crotonaldehyde combination in olefin metathesis reactions was demonstrated by a short synthesis of the natural product 7-methoxywutaifuranal, which was obtained from isoeugenol in a 44% yield over five steps. We suggest that the superior performance of crotonaldehyde in the CM reactions investigated can be rationalized by "methylene capping", i.e., the steric stabilization of the propagating Ru-alkylidene species.

Enantiospecific Total Synthesis and Absolute Configuration Assignment of Chabrolobenzoquinone H

Chabrolobenzoquinone H (1), a meroditerpene metabolite with cytotoxic activity, is synthesized via a stereoselective Julia-Kocienski olefination between a chiral pool derived aliphatic PT-sulfone and a benzoquinone aldehyde partner. The latter was obtained via consecutive chain extension steps involving a Stille coupling and a stereospecific olefin cross-metathesis reaction followed by malonic ester synthesis and a Krapcho decarboxylation. Furthermore, this total synthesis securely determined the absolute configuration of the targeted natural product.

Sterically Tuned N-Heterocyclic Carbene Ligands for the Efficient Formation of Hindered Products in Ru-Catalyzed Olefin Metathesis

Formation of tetrasubstituted C-C double bonds via olefin metathesis is considered very challenging for classical Ru-based complexes. In the hope to improve this condition, three ruthenium olefin metathesis catalysts bearing sterically reduced N-heterocyclic carbene (NHC) ligands with xylyl "arms" were synthesized, characterized using both computational and experimental techniques, and tested in a number of challenging reactions. The catalysts are predicted to initiate much faster than the analogue with mesityl N-substituents. We also foreboded the rotation of xylyl side groups at ambient temperature and the existence of all four atropoisomers in the solution, which was in agreement with experimental data. These catalysts exhibited high activity at relatively low temperatures (45-60 °C) and at reduced catalyst loadings in various reactions of sterically hindered alkenes, including complex polyfunctional substrates of pharmaceutical interest, such as yangonin precursors, chrysantemic acid derivatives, analogues of cannabinoid agonists, α-terpineol, and finally a thermally unstable peroxide.

NHC Ligand Effects on Ru-Catalyzed Cross-Metathesis of Renewable Materials

As petrochemical resources become increasingly scarce and expensive, much attention has been focused on renewable resources from biomass as alternative options for producing basic building blocks for chemical manufacturing. Catalytic olefin metathesis represents a powerful tool to transform biosourced structural motifs in valuable commodity, fine, and specialty chemicals. In that respect, the appropriate choice of the catalyst is the key issue of each metathesis transformation. The current study examines the influence of different N-heterocyclic carbene (NHC) ligands containing one or two N-alkyl substituents on the efficiency of Hoveyda–Grubbs-type catalysts in the cross-metathesis reaction of ethyl oleate with cis-1,4-diacetoxy-2-butene and cross-metathesis of eugenol acetate with cis-1,4-dichloro-2-butene. Interestingly, the introduction of alkyl N-substituents in the NHC ligand was revealed as beneficial for catalytic performances in the examined cross-metathesis (CM) reactions, leading to higher activity and/or selectivity than those observed in the presence of the classical, commercially available Hoveyda–Grubbs second generation catalyst (HGII).

Optimized Ring Closing Metathesis Reaction Conditions To Suppress Desallyl Side Products in the Solid-Phase Synthesis of Cyclic Peptides Involving Tyrosine(O-allyl)

We are exploring constraining aromatic residues in the kappa opioid receptor selective antagonist arodyn (Ac[Phe1,2,3,Arg4,d-Ala8]dynorphin A(1-11)-NH2) by ring closing metathesis (RCM) involving tyrosine(O-allyl) (Tyr(All)), but desallyl products limited the yields of the desired cyclic peptide. The model dipeptide Fmoc-Tyr(All)-Tyr(All) was used to explore different reaction conditions, including the use of isomerization suppressants, to minimize formation of the desallyl products and enhance formation of the desired RCM product. Reaction conditions were identified that enhanced the RCM product yield while suppressing desallyl products using both second-generation Grubbs and second-generation Hoveyda-Grubbs catalysts. These optimized reaction conditions were then applied to the cyclization of a tripeptide and an arodyn analog resulting in ≥70% conversion to the desired cyclic peptides. These strategies should be applicable to RCM involving Tyr(All) and similar residues in peptide and peptidomimetic cyclizations performed on solid phase.

Preparation of Key Intermediates for the Syntheses of Coenzyme Q10 and Derivatives by Cross-Metathesis Reactions

An alternative catalytic strategy for the preparation of benzylmethacrylate esters, key intermediates in the synthesis of coenzyme Q₁₀ and derivatives, was reported. This strategy avoided undesirable stoichiometric reduction/oxidation processes by utilizing the catalytic formation of allylarenes and then cross-metathesis to selectively form E-benzylmethacrylate esters with good yields (58–64%) and complete E-selectivity. The ester intermediates were reduced to common key benzylallylic alcohols (90–92% yield), which were subsequently used in the formal syntheses of coenzyme Q₁₀ and one derivative.

Facile preparation of polycarbonates from bio-based eugenol and 2-methoxy-4-vinylphenol

Polymerization of α,ω-diene functionalized carbonate monomers prepared from bio-based eugenol and 2-methoxy-4-vinylphenol through thiol–ene click and ADMET polymerizations produced polycarbonates with moderate molecular weight satisfactory thermal properties.

Synthesis of Stilbene and Chalcone Inhibitors of Influenza A Virus by SBA-15 Supported Hoveyda-Grubbs Metathesis

Stilbene and chalcone derivatives with biological activity against influenza A virus have been synthesized by self-, cross-, and ring-closing metathesis procedures. The reactions were performed under environmentally friendly conditions using the second generation Hoveyda-Grubbs catalyst Aquamet SiPr after immobilization on Santa Barbara Amorphous mesoporous silicate SBA-15. Irrespective from the experimental conditions, the heterogeneous catalyst showed activity and selectivity comparable than the homogeneous counterpart for at least six successive runs without appreciable leaching of the active species. An appreciable antiviral activity against influenza A virus for some of the novel derivatives were observed, mainly involving the early stage of the virus-replication life-cycle.

Cross metathesis-mediated synthesis of hydroxamic acid derivatives

An alternative synthesis of α,ß-unsaturated hydroxamates via cross metathesis between a class-I olefin and N-benzyloxyacrylamide is reported. The reaction proceeds better in the presence of Grubbs’ second generation catalyst within short time and in good yields (57–85%) with a range of substrates. Subsequent hydrogenation of each of the CM products delivers the title compounds in moderate to very good yield (70–89%). An important demonstration of the protocol is the preparation of the unusual amino acid component of the bioactive cyclic peptide Chap-31.

Synthesis of new polyesters by acyclic diene metathesis polymerization of bio-based α,ω-dienes prepared from eugenol and castor oil (undecenoate)

Synthesis of high molecular weight polymers by acyclic diene metathesis (ADMET) polymerization of α,ω-diene prepared from bio-renewable eugenol and castor oil (undecenoate) has been demonstrated.

Efficient Conversion of Renewable Unsaturated Fatty Acid Methyl Esters by Cross-Metathesis with Eugenol

Cross-metathesis of unsaturated fatty acid methyl esters (methyl oleate (MO), methyl petroselinate (MP), and methyl erucate (ME), obtained from vegetable oils) with eugenol (obtained from clove oil) proceeded under green, mild conditions (in 2-propanol or ethanol at 50 °C) in the presence of a ruthenium-carbene catalyst (called a second-generation Grubbs catalyst). These metathesis reactions proceeded with both high conversion (>90% of MO, MP) and selectivity (>98%) even with low catalyst loading (0.1 mol % Ru).

Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading

In pursuit of more sustainable and competitive biorefineries, the effective valorisation of lignin is key. An alluring opportunity is the exploitation of lignin as a resource for chemicals. Three technological biorefinery aspects will determine the realisation of a successful lignin-to-chemicals valorisation chain, namely (i) lignocellulose fractionation, (ii) lignin depolymerisation, and (iii) upgrading towards targeted chemicals. This review provides a summary and perspective of the extensive research that has been devoted to each of these three interconnected biorefinery aspects, ranging from industrially well-established techniques to the latest cutting edge innovations. To navigate the reader through the overwhelming collection of literature on each topic, distinct strategies/topics were delineated and summarised in comprehensive overview figures. Upon closer inspection, conceptual principles arise that rationalise the success of certain methodologies, and more importantly, can guide future research to further expand the portfolio of promising technologies. When targeting chemicals, a key objective during the fractionation and depolymerisation stage is to minimise lignin condensation (i.e. formation of resistive carbon-carbon linkages). During fractionation, this can be achieved by either (i) preserving the (native) lignin structure or (ii) by tolerating depolymerisation of the lignin polymer but preventing condensation through chemical quenching or physical removal of reactive intermediates. The latter strategy is also commonly applied in the lignin depolymerisation stage, while an alternative approach is to augment the relative rate of depolymerisation vs. condensation by enhancing the reactivity of the lignin structure towards depolymerisation. Finally, because depolymerised lignins often consist of a complex mixture of various compounds, upgrading of the raw product mixture through convergent transformations embodies a promising approach to decrease the complexity. This particular upgrading approach is termed funneling, and includes both chemocatalytic and biological strategies.

Bright Side of Lignin Depolymerization: Toward New Platform Chemicals

Lignin, a major component of lignocellulose, is the largest source of aromatic building blocks on the planet and harbors great potential to serve as starting material for the production of biobased products. Despite the initial challenges associated with the robust and irregular structure of lignin, the valorization of this intriguing aromatic biopolymer has come a long way: recently, many creative strategies emerged that deliver defined products via catalytic or biocatalytic depolymerization in good yields. The purpose of this review is to provide insight into these novel approaches and the potential application of such emerging new structures for the synthesis of biobased polymers or pharmacologically active molecules. Existing strategies for functionalization or defunctionalization of lignin-based compounds are also summarized. Following the whole value chain from raw lignocellulose through depolymerization to application whenever possible, specific lignin-based compounds emerge that could be in the future considered as potential lignin-derived platform chemicals.

Synthesis of 2-aminosuberic acid derivatives as components of some histone deacetylase inhibiting cyclic tetrapeptides

A new synthesis of the important amino acid 2-aminosuberic acid from aspartic acid is reported. The methodology involves the alternate preparation of (S)-2-aminohept-6-enoate ester as a building block and its diversification through a cross-metathesis reaction to prepare the title compounds. The utility of the protocol is demonstrated through the preparation of three suberic acid derivatives of relevance to the design and the synthesis of peptides of biological relevance.

p-Cymene as Solvent for Olefin Metathesis: Matching Efficiency and Sustainability

The underexploited biorenewable p-cymene is employed as a solvent for the metathesis of various substrates. p-Cymene is a nontoxic compound that can be obtained in large amounts as a side product of the cellulose and citrus industry. For the cross-metathesis of estragole with methyl acrylate, this solvent prevents the consecutive double-bond isomerization of the product and affords the best yield of all solvents tested. Undesired consecutive isomerization is a major challenge for many substrates in olefin metathesis, including pharmaceutical precursors, and the use of p-cymene as a solvent may be a way to prevent it. This solvent results in a better metathesis performance than toluene for the three substrates tested in this work, matching its performance for two other substrates.

DFT study of isomers of the ruthenium dihydride complex RuH2(CO)2(AsMe2Ph)2

A density functional theory (DFT) study of cct-As, ccc, and cct-CO isomers of the ruthenium dihydride complex RuH₂(CO)₂(AsMe₂Ph)₂ is reported (see Scheme for the labeling isomer 34 structures of RuH₂(CO)₂(AsMe₂Ph)₂). Complex geometries and relative energies of different isomers have been calculated with both B3LYP and M06-2X functionals. The results show that the B3LYP calculated Boltzmann populations of cct-As, ccc, and cct-CO isomers are 65.5, 34.2, and 0.3%, respectively. These are in better agreement with the experimental data than those calculated at the M06-2X level. However, the calculations of ¹H NMR chemical shifts were found to be better described with M06-2X than with B3LYP or with HF level of theories. In addition, a transition state between the two most stable isomers was determined through DFT/(B3LYP or M06-2X) calculations. Graphical Abstract Scheme: Labeling structure of RuH₂(CO)₂(AsMe₂Ph)₂.

Monomer design strategies to create natural product-based polymer materials

In an effort towards enhancing function and sustainability, natural products have become of interest in the field of polymer chemistry.

Cross metathesis of methyl oleate (MO) with terminal, internal olefins by ruthenium catalysts: factors affecting the efficient MO conversion and the selectivity

Cross metathesis (CM) of methyl oleate (MO) with cis-4-octene, cis-stilbene, allyltrimethylsilane by RuCl₂(PCy₃)(IMesH₂)(CHPh) yielded CM products with high MO conversion, high selectivity; the effect of olefin substituents, conditions was explored.

Tandem catalysis versus one-pot catalysis: ensuring process orthogonality in the transformation of essential-oil phenylpropenoids into high-value products via olefin isomerization–metathesis

One-pot and tandem catalysis methodologies are explored in developing efficient isomerization–metathesis routes to high-value cinnamates and ferulates from essential-oil allylbenzenes.

Cross metathesis of unsaturated epoxides for the synthesis of polyfunctional building blocks

The cross metathesis of 1,2-epoxy-5-hexene (1) with methyl acrylate and acrylonitrile was investigated as an entry to the synthesis of polyfunctional compounds. The resulting cross metathesis products were hydrogenated in a tandem fashion employing the residual ruthenium from the metathesis step as the hydrogenation catalyst. Interestingly, the epoxide ring remained unreactive toward this hydrogenation method. The saturated compound resulting from the cross metathesis of 1 with methyl acrylate was transformed by means of nucleophilic ring-opening of the epoxide to furnish a diol, an alkoxy alcohol and an amino alcohol in high yields.

ADMET polymerization of bio-based biphenyl compounds

Bio-based phenols were dimerized and employed as monomers in ADMET polymerization.

Polyesters derived from bio-based eugenol and 10-undecenoic acid: synthesis, characterization, and structure–property relationships

A series of thermoplastic polyesters with versatile thermal and mechanical properties were prepared from renewable eugenol, which is extracted from lignocellulosic biomass-clove oil.

A high-performance renewable thermosetting resin derived from eugenol

A renewable bisphenol, 4,4'-(butane-1,4-diyl)bis(2-methoxyphenol), was synthesized on a preparative scale by a solvent-free, Ru-catalyzed olefin metathesis coupling reaction of eugenol followed by hydrogenation. After purification, the bisphenol was converted to a new bis(cyanate) ester by standard techniques. The bisphenol and cyanate ester were characterized rigorously by NMR spectroscopy and single-crystal X-ray diffraction studies. After complete cure, the cyanate ester exhibited thermal stability in excess of 350 °C and a glass transition temperature (Tg ) of 186 °C. As a result of the four-carbon chain between the aromatic rings, the thermoset displayed a water uptake of only 1.8% after a four day immersion in 85 °C water. The wet Tg of the material (167 °C) was only 19 °C lower than the dry Tg , and the material showed no significant degradation as a result of the water treatment. These results suggest that this resin is well suited for maritime environments and provide further evidence that full-performance resins can be generated from sustainable feedstocks.

Thiol–ene adhesives from clove oil derivatives

This paper reports the synthesis of catechol-functionalized thiol–ene networks as photocurable adhesives, where adhesive interactions are derived from 4-allylpyrocatechol – an alkene readily obtained from Syzygium aromaticum flower buds (clove oil).

Terminal conjugated dienes via a ruthenium-catalyzed cross-metathesis/elimination sequence: application to renewable resources

Two-step synthesis of terminal 1,3-dienes catalyzed by two different ruthenium complexes.