Sonophoric nanoprobe aided pH measurement in vivo using photoacoustic spectroscopy

Non-Invasive Monitoring of Human Health by Photoacoustic Spectroscopy

For certain diseases, the continuous long-term monitoring of the physiological condition is crucial. Therefore, non-invasive monitoring methods have attracted widespread attention in health care. This review aims to discuss the non-invasive monitoring technologies for human health based on photoacoustic spectroscopy. First, the theoretical basis of photoacoustic spectroscopy and related devices are reported. Furthermore, this article introduces the monitoring methods for blood glucose, blood oxygen, lipid, and tumors, including differential continuous-wave photoacoustic spectroscopy, microscopic photoacoustic spectroscopy, mid-infrared photoacoustic detection, wavelength-modulated differential photoacoustic spectroscopy, and others. Finally, we present the limitations and prospects of photoacoustic spectroscopy.

Intracellular detection of singlet oxygen using fluorescent nanosensors

Detection of singlet oxygen is of great importance for a range of therapeutic applications, particularly photodynamic therapy, plasma therapy and also during photo-endosomolytic activity. Here we present a novel method of intracellular detection of singlet oxygen using biocompatible polymeric nanosensors, encapsulating the organic fluorescent dye, Singlet Oxygen Sensor Green (SOSG) within its hydrophobic core. The singlet oxygen detection efficiency of the nanosensors was quantified experimentally by treating them with a plasma source and these results were further validated by using Monte Carlo simulations. The change in fluorescence intensity of the nanosensors serves as a metric to detect singlet oxygen in the local micro-environment inside mammalian cancer cells. We used these nanosensors for monitoring singlet oxygen inside endosomes and lysosomes of cancer cells, during cold plasma therapy, using a room-temperature Helium plasma jet.

Photoacoustic Imaging: Contrast Agents and Their Biomedical Applications

Photoacoustic (PA) imaging as a fast-developing imaging technique has great potential in biomedical and clinical applications. It is a noninvasive imaging modality that depends on the light-absorption coefficient of the imaged tissue and the injected PA-imaging contrast agents. Furthermore, PA imaging provides superb contrast, super spatial resolution, and high penetrability and sensitivity to tissue functional characteristics by detecting the acoustic wave to construct PA images. In recent years, a series of PA-imaging contrast agents are developed to improve the PA-imaging performance in biomedical applications. Here, recent progress of PA contrast agents and their biomedical applications are outlined. PA contrast agents are classified according to their components and function, and gold nanocrystals, gold-nanocrystal assembly, transition-metal chalcogenides/MXene-based nanomaterials, carbon-based nanomaterials, other inorganic imaging agents, small organic molecules, semiconducting polymer nanoparticles, and nonlinear PA-imaging contrast agents are discussed. The applications of PA contrast agents as biosensors (in the sensing of metal ions, pH, enzymes, temperature, hypoxia, reactive oxygen species, and reactive nitrogen species) and in bioimaging (lymph nodes, vasculature, tumors, and brain tissue) are discussed in detail. Finally, an outlook on the future research and investigation of PA-imaging contrast agents and their significance in biomedical research is presented.

Electromagnetic⁻Acoustic Sensing for Biomedical Applications

This paper reviews the theories and applications of electromagnetic⁻acoustic (EMA) techniques (covering light-induced photoacoustic, microwave-induced thermoacoustic, magnetic-modulated thermoacoustic, and X-ray-induced thermoacoustic) belonging to the more general area of electromagnetic (EM) hybrid techniques. The theories cover excitation of high-power EM field (laser, microwave, magnetic field, and X-ray) and subsequent acoustic wave generation. The applications of EMA methods include structural imaging, blood flowmetry, thermometry, dosimetry for radiation therapy, hemoglobin oxygen saturation (SO₂) sensing, fingerprint imaging and sensing, glucose sensing, pH sensing, etc. Several other EM-related acoustic methods, including magnetoacoustic, magnetomotive ultrasound, and magnetomotive photoacoustic are also described. It is believed that EMA has great potential in both pre-clinical research and medical practice.

An active DNA-based nanoprobe for photoacoustic pH imaging

We report an active DNA construct capable of probing pH through a photoacoustic (PA) ratiometric analysis approach. Our nanoprobe enables different PA readout in tissue mimicking phantoms in the range between pH 6.8 to 7.8 at physiologically relevant sodium concentrations. Thus, it represents a promising platform to probe pH values relevant to the tumor microenvironment using PA.

Ratiometric optical nanoprobes enable accurate molecular detection and imaging

Exploring and understanding biological and pathological changes are of great significance for early diagnosis and therapy of diseases. Optical sensing and imaging approaches have experienced major progress in this field. Particularly, an emergence of various functional optical nanoprobes has provided enhanced sensitivity, specificity, targeting ability, as well as multiplexing and multimodal capabilities due to improvements in their intrinsic physicochemical and optical properties. However, one of the biggest challenges of conventional optical nanoprobes is their absolute intensity-dependent signal readout, which causes inaccurate sensing and imaging results due to the presence of various analyte-independent factors that can cause fluctuations in their absolute signal intensity. Ratiometric measurements provide built-in self-calibration for signal correction, enabling more sensitive and reliable detection. Optimizing nanoprobe designs with ratiometric strategies can surmount many of the limitations encountered by traditional optical nanoprobes. This review first elaborates upon existing optical nanoprobes that exploit ratiometric measurements for improved sensing and imaging, including fluorescence, surface enhanced Raman scattering (SERS), and photoacoustic nanoprobes. Next, a thorough discussion is provided on design strategies for these nanoprobes, and their potential biomedical applications for targeting specific biomolecule populations (e.g. cancer biomarkers and small molecules with physiological relevance), for imaging the tumor microenvironment (e.g. pH, reactive oxygen species, hypoxia, enzyme and metal ions), as well as for intraoperative image guidance of tumor-resection procedures.

Development of Photoacoustic Probes for in Vivo Molecular Imaging

Photoacoustic (PA) imaging is an emerging, non-invasive imaging modality that encompasses attributes of both optical and ultrasound imaging. Because of the combination of optical excitation and acoustic detection, PA imaging enables high contrast and high resolution within deep tissue (centimeter depths). Recent advances in PA probe development have allowed for stimulus-responsive imaging in a variety of biological models with implications for basic, translational, and clinical sciences. This perspective highlights recent progress in the development of PA probes and their application to live-animal molecular imaging.

In vivo quantitative imaging of tumor pH by nanosonophore assisted multispectral photoacoustic imaging

Changes of physiological pH are correlated with several pathologies, therefore the development of more effective medical pH imaging methods is of paramount importance. Here, we report on an in vivo pH mapping nanotechnology. This subsurface chemical imaging is based on tumor-targeted, pH sensing nanoprobes and multi-wavelength photoacoustic imaging (PAI). The nanotechnology consists of an optical pH indicator, SNARF-5F, 5-(and-6)-Carboxylic Acid, encapsulated into polyacrylamide nanoparticles with surface modification for tumor targeting. Facilitated by multi-wavelength PAI plus a spectral unmixing technique, the accuracy of pH measurement inside the biological environment is not susceptible to the background optical absorption of biomolecules, i.e., hemoglobins. As a result, both the pH levels and the hemodynamic properties across the entire tumor can be quantitatively evaluated with high sensitivity and high spatial resolution in in vivo cancer models. The imaging technology reported here holds the potential for both research on and clinical management of a variety of cancers.

Background optical absorption of several biomolecules impedes an effective in vivo pH imaging in tumors. Here, the authors developed a visible light-based in vivo pH mapping method by coupling photoacoustic imaging and pH-responsive modified nanoparticles that selectively target tumor cells.

Ion-Selective Nanosensor for Photoacoustic and Fluorescence Imaging of Potassium

Ion-selective optodes (ISOs), the optical analog of ion-selective electrodes, have played an increasingly important role in chemical and biochemical analysis. Here we extend this technique to ion-selective photoacoustic optodes (ISPAOs) that serve at the same time as fluorescence-based ISOs, and apply it specifically to potassium (K⁺). Notably, the potassium ion is one of the most abundant cations in biological systems, involved in numerous physiological and pathological processes. Furthermore, it has been recently reported that the presence of abnormal extracellular potassium concentrations in tumors suppresses the immune responses and thus suppresses immunotherapy. However, unfortunately, sensors capable of providing potassium images in vivo are still a future proposition. Here, we prepared an ion-selective potassium nanosensor (NS) aimed at in vivo photoacoustic (PA) chemical imaging of the extracellular environment, while being also capable of fluorescence based intracellular ion-selective imaging. This potassium nanosensor (K⁺ NS) modulates its optical properties (absorbance and fluorescence) according to the potassium concentration. The K⁺ NS is capable of measuring potassium, in the range of 1 mM to 100 mM, with high sensitivity and selectivity, by ISPAO based measurements. Also, a near infrared dye surface modified K⁺ NS allows fluorescence-based potassium sensing in the range of 20 mM to 1 M. The K⁺ NS serves thus as both PA and fluorescence based nanosensor, with response across the biologically relevant K⁺ concentrations, from the extracellular 5 mM typical values (through PA imaging) to the intracellular 150 mM typical values (through fluorescence imaging).

Optical imaging of localized chemical events using programmable diamond quantum nanosensors

Development of multifunctional nanoscale sensors working under physiological conditions enables monitoring of intracellular processes that are important for various biological and medical applications. By attaching paramagnetic gadolinium complexes to nanodiamonds (NDs) with nitrogen-vacancy (NV) centres through surface engineering, we developed a hybrid nanoscale sensor that can be adjusted to directly monitor physiological species through a proposed sensing scheme based on NV spin relaxometry. We adopt a single-step method to measure spin relaxation rates enabling time-dependent measurements on changes in pH or redox potential at a submicrometre-length scale in a microfluidic channel that mimics cellular environments. Our experimental data are reproduced by numerical simulations of the NV spin interaction with gadolinium complexes covering the NDs. Considering the versatile engineering options provided by polymer chemistry, the underlying mechanism can be expanded to detect a variety of physiologically relevant species and variables.

Croconaine rotaxane for acid activated photothermal heating and ratiometric photoacoustic imaging of acidic pH

Absorption of 808 nm laser light by liposomes containing a pH sensitive, near-infrared croconaine rotaxane dye increases dramatically in weak acid. A stealth liposome composition permits acid activated, photothermal heating and also acts as an effective nanoparticle probe for ratiometric photoacoustic imaging of acidic pH in deep sample locations, including a living mouse.

Functional Photoacoustic Imaging of Gastric Acid Secretion Using pH-Responsive Polyaniline Nanoprobes

A stomach functional imaging technique based on photoacoustics achieves noninvasive gastric acid secretory assessment utilizing pH-responsive polyaniline nanoprobes. A testing protocol mimicking clinical practice is established using a mouse model. After imaging, the nanoprobes are excreted outside the body without inducing systematic toxicity. Further optimization and translation of this technology can help alleviate patients' suffering and side effects.

Lifetime-resolved Photoacoustic (LPA) Spectroscopy for monitoring Oxygen change and Photodynamic Therapy (PDT)

The Methylene Blue loaded Polyacrylamide Nanoparticles (MB-PAA NPs) are used for oxygen sensing and Photodynamic therapy (PDT), a promising therapeutic modality employed for various tumors, with distinct advantages of delivery of biomedical agents and protection from other bio-molecules overcoming inherent limitations of molecular dyes. Lifetime-resolved photoacoustic spectroscopy using quenched-phosphorescence method is applied with MB-PAA NPs so as to sense oxygen, while the same light source is used for PDT. The dye is excited by absorbing 650 nm wavelength light from a pump laser to reach triplet state. The probe laser at 810 nm wavelength is used to excite the first triplet state at certain delayed time to measure the dye lifetime which indicates oxygen concentration. The 9L cells (106 cells/ml) incubated with MB-PAA NP solution are used for monitoring oxygen level change during PDT in situ test. The oxygen level and PDT efficacy are confirmed with a commercial oximeter, and fluorescence microscope imaging and flow cytometry results. This technique with the MB-PAA NPs allowed us to demonstrate a potential non-invasive theragnostic operation, by monitoring oxygen depletion during PDT in situ, without the addition of secondary probes. Here, we demonstrate this theragnostic operation, in vitro, performing PDT while monitoring oxygen depletion. We also show the correlation between O2 depletion and cell death.

Polyethylenimine incorporation into hydrogel nanomatrices for enhancing nanoparticle-assisted chemotherapy

Addition of polyethylenimine into drug loaded hydrogel nanoparticle leads to enhanced cellular uptake, better ability to control drug release and deliver drugs to the cytosol, while evading the endosomes.

A Self-Assembled Albumin-Based Nanoprobe for In Vivo Ratiometric Photoacoustic pH Imaging

A photoacoustic nanoprobe is self-assembled from human serum albumin and two types of dye molecules, one is inert to pH and the other is pH sensitive. This probe and the quantitative ratiometric photoacoustic pH imaging method are shown to have high safety, be easy-to-operate, and have depth-independent accuracy for real-time in vivo pH imaging of entire tumors. These features make them promising for future cancer prognosis and therapeutic planning.

Optical drug monitoring: photoacoustic imaging of nanosensors to monitor therapeutic lithium in vivo

Personalized medicine could revolutionize how primary care physicians treat chronic disease and how researchers study fundamental biological questions. To realize this goal, we need to develop more robust, modular tools and imaging approaches for in vivo monitoring of analytes. In this report, we demonstrate that synthetic nanosensors can measure physiologic parameters with photoacoustic contrast, and we apply that platform to continuously track lithium levels in vivo. Photoacoustic imaging achieves imaging depths that are unattainable with fluorescence or multiphoton microscopy. We validated the photoacoustic results that illustrate the superior imaging depth and quality of photoacoustic imaging with optical measurements. This powerful combination of techniques will unlock the ability to measure analyte changes in deep tissue and will open up photoacoustic imaging as a diagnostic tool for continuous physiological tracking of a wide range of analytes.

Hydrogel nanosensors for biophotonic imaging of chemical analytes

Polymer-based hydrogel nanosensors have been developed and extensively utilized for the imaging and dynamic monitoring of chemical properties, response to external stimulants, and metabolism of cells and tissues, in real time, using optical imaging techniques. A large fraction of these polymeric nanoparticles are based on polyacrylamide (PAA) owing to its excellent properties such as nontoxicity, biocompatibility and flexibility of engineering. The properties of the PAA matrix can be specifically tailored, depending on the application, and the molecules can be loaded into the matrix. Various surface modifications enable one to control its behavior in cells and in vivo, and can be utilized for specific targeting to cells and subcellular organelles. This special report describes the recent advances in the design and application of the latest generation of PAA nanosensors for some physiologically important ions and small molecules.

Development of luminescent pH sensor films for monitoring bacterial growth through tissue

Although implanted medical devices (IMDs) offer many benefits, they are susceptible to bacterial colonization and infections. Such infections are difficult to treat because bacteria could form biofilms on the implant surface, which reduce antibiotics penetration and generate local dormant regions with low pH and low oxygen. In addition, these infections are hard to detect early because biofilms are often localized on the surface. Herein, an optical sensor film is developed to detect local acidosis on an implanted surface. The film contains both upconverting particles (UCPs) that serve as a light source and a pH indicator that alters the luminescence spectrum. When irradiated with 980 nm light, the UCPs produce deeply penetrating red light emission, while generating negligible autofluorescence in the tissue. The basic form of the pH indicator absorbs more of upconversion luminescence at 661 nm than at 671 nm and consequently the spectral ratio indicates pH. Implanting this pH sensor film beneath 6-7 mm of porcine tissue does not substantially affect the calibration curve because the peaks are closely spaced. Furthermore, growth of Staphylococcus epidermidis on the sensor surface causes a local pH decrease that can be detected non-invasively through the tissue.