Voltammetric behaviour of free DNA bases, methylcytosine and oligonucleotides at disposable screen printed graphite electrode platforms

Hydroxyl Radical vs. One-Electron Oxidation Reactivities in an Alternating GC Double-Stranded Oligonucleotide: A New Type Electron Hole Stabilization

We examined the reaction of hydroxyl radicals (HO•) and sulfate radical anions (SO4•-), which is generated by ionizing radiation in aqueous solutions under anoxic conditions, with an alternating GC doubled-stranded oligodeoxynucleotide (ds-ODN), i.e., the palindromic 5'-d(GCGCGC)-3'. In particular, the optical spectra of the intermediate species and associated kinetic data in the range of ns to ms were obtained via pulse radiolysis. Computational studies by means of density functional theory (DFT) for structural and time-dependent DFT for spectroscopic features were performed on 5'-d(GCGC)-3'. Comprehensively, our results suggest the addition of HO• to the G:C pair moiety, affording the [8-HO-G:C]• detectable adduct. The previous reported spectra of one-electron oxidation of a variety of ds-ODN were assigned to [G(-H+):C]• after deprotonation. Regarding 5'-d(GCGCGC)-3' ds-ODN, the spectrum at 800 ns has a completely different spectral shape and kinetic behavior. By means of calculations, we assigned the species to [G:C/C:G]•+, in which the electron hole is predicted to be delocalized on the two stacked base pairs. This transient species was further hydrated to afford the [8-HO-G:C]• detectable adduct. These remarkable findings suggest that the double-stranded alternating GC sequences allow for a new type of electron hole stabilization via delocalization over the whole sequence or part of it.

Facile Approach to Fabricate a Chemical Sensor Array Based on Nanocurcumin-Metal Ions Aggregates: Detection and Identification of DNA Nucleobases

Here, a three-channel absorbance sensor array based on the nanocurcumin-metal ion (NCur-MI) aggregates is designed for the detection and identification of deoxyribonucleic acid nucleobases (DNA NBs) for the first time. For this purpose, the binding affinities of some of MIs (i.e., Co2+, Cr3+, Cu2+, Fe2+, Fe3+, Hg2+, Mn2+, Ni2+, V3+, and Zn2+) to the NCur to induce the aggregation were evaluated under various experimental conditions. Further studies reveal that in the presence of DNA NBs, the aggregates of NCur-Co2+, NCur-Ni2+, and NCur-Zn2+ show the diverse absorbance responses to the deaggregation of NCur depending on the binding affinity of each of DNA NBs to the metal ions Co2+, Ni2+, and Zn2+. These responses are distinguishable from one another. Thus, clear differentiation among the DNA NBs is achieved by linear discriminant analysis and hierarchical clustering analysis to generate clustering maps. The discriminatory capacity of the sensor array for the identification of the DNA NBs is tested in the ranges of 2.4-16 and 5.6-10.4 μM. Furthermore, a mixed set of the DNA NBs was prepared for multivariate multicomponent analysis. Finally, the practicability of the sensor array is confirmed by the discrimination of the DNA NBs in an animal DNA sample. It should be noted that the proposed array is the first example to fabricate an NCur-based sensor array for the simultaneous detection of DNA NBs.

Investigation of the Electrooxidation of Thymine on Screen-Printed Carbon Electrodes by Hyphenation of Electrochemistry and Mass Spectrometry

The electrooxidation of thymine on screen-printed carbon electrodes was investigated utilizing different complementary instrumental approaches. The potential-dependent product profile was obtained by recording real-time mass voltammograms. Electrochemical flow cells with integrated disposable electrodes were directly coupled with mass spectrometry to facilitate a very fast detection of electrogenerated species. Thymine dimers were found at a potential of about 1.1 V in ammonium acetate (pH 7.0) and 1.25 V in ammonium hydrogen carbonate electrolyte (pH 8.0). Electrochemistry-capillary electrophoresis-mass spectrometry measurements revealed that two isobaric isomers of a dimeric oxidation product were formed. Separations at different time intervals between end of oxidation and start of separation showed that these were hydrated over time. An investigation of the pK_a values by changing the separation conditions in electrochemistry-capillary electrophoresis-ultraviolet-visible spectroscopy measurements allowed for further characterization of the primary oxidation products. The results showed that both isomers exhibited two deprotonation steps. The oxidation products were further characterized by high-performance liquid chromatography-tandem mass spectrometry. Based on the obtained data, the main oxidation products of thymine in aqueous solution could most likely be identified as N(1)-C(5') and N(1)-C(6') linked dimer species evolving into the corresponding dimer hydrates over time. The presented methods for online characterization of electrochemically pretreated samples showed that not only mass spectrometric data can be obtained by electrochemistry-mass spectrometry but also further characterizations such as the investigation of product stability and the pH-dependent protonation or deprotonation behavior are possible. This is valid not only for stable oxidation products but also for intermediates, as analysis can be carried out within a short time scale. Thus, a vast amount of valuable experimental data can be acquired, which can help in understanding electrooxidation processes.

The Dynamics of Hole Transfer in DNA

High-energy radiation and oxidizing agents can ionize DNA. One electron oxidation gives rise to a radical cation whose charge (hole) can migrate through DNA covering several hundreds of Å, eventually leading to irreversible oxidative damage and consequent disease. Understanding the thermodynamic, kinetic and chemical aspects of the hole transport in DNA is important not only for its biological consequences, but also for assessing the properties of DNA in redox sensing or labeling. Furthermore, due to hole migration, DNA could potentially play an important role in nanoelectronics, by acting as both a template and active component. Herein, we review our work on the dynamics of hole transfer in DNA carried out in the last decade. After retrieving the thermodynamic parameters needed to address the dynamics of hole transfer by voltammetric and spectroscopic experiments and quantum chemical computations, we develop a theoretical methodology which allows for a faithful interpretation of the kinetics of the hole transport in DNA and is also capable of taking into account sequence-specific effects.

Can the mechanical activation (polishing) of screen-printed electrodes enhance their electroanalytical response?

The mechanical activation (polishing) of screen-printed electrodes (SPEs) is explored and shown to exhibit an improved voltammetric response (in specific cases) when polished with either commonly available alumina slurry or diamond spray. Proof-of-concept is demonstrated for the electrochemical sensing of nitrite where an increase in the voltammetric current is found using both polishing protocols, exhibiting an improved limit of detection (3σ) and a two-fold increase in the electroanalytical sensitivity compared to the respective un-polished counterpart. It is found that mechanical activation/polishing increases the C/O ratio which significantly affects inner-sphere electrochemical probes only (whereas outer-sphere systems remain unaffected). Mechanical activation/polishing has the potential to be a simple pre-treatment technique that can be extended and routinely applied towards other analytes for an observable improvement in the electroanalytical response.

Modeling DNA oxidation in water

A novel set of hole-site energies and electronic coupling parameters to be used, in the framework of the simplest tight-binding approximation, for predicting DNA hole trapping efficiencies and rates of hole transport in oxidized DNA is proposed. The novel parameters, significantly different from those previously reported in the literature, have been inferred from reliable density functional calculations, including both the sugar-phosphate ionic backbone and the effects of the aqueous environment. It is shown that most of the experimental oxidation free energies of DNA tracts and of oligonucleotides available from photoelectron spectroscopy and voltammetric measurements are reproduced with great accuracy, without the need for introducing sequence dependent parameters.

Electrochemical Determination of the Serotonin Reuptake Inhibitor, Dapoxetine, Using Cesium-Gold Nanoparticles

Cesium-gold (Cs-Au) nanoparticles are shown to be analytically advantageous for the electroanalytical sensing of dapoxetine (DPX), a serotonin reuptake inhibitor used for the treatment of premature ejaculation. The Cs-Au nanoparticles are electrically wired and supported upon mass producible, economical screen-printed electrochemical sensing platforms and are characterized electrochemically (cyclic voltammetry and electrochemical impedance spectroscopy) and physiochemically (field emission scanning electron microscopy and energy dispersive X-ray analysis). The face-centered design was applied to optimize the significant experimental factors by using square wave voltammetry. The Cs-Au-based sensor is found to exhibit a large linear range (10-7 to 10-4 M) with a good analytical linearity with the limits of detection and quantification corresponding to 2.50 × 10-10 and 8.33 × 10-8 M, respectively. The developed sensor was successfully applied in the quantification of DPX in the presence of sildenafil, both of which are commonly found within combined dose tablet pharmaceutical formulations. The proposed DPX electrochemical Cs-Au-based sensor has the advantages of being single-shot and disposable and is shown to be successful in determining DPX in pharmaceutical formulations, human urine, and serum samples with acceptable recoveries.

Electrochemical biosensing strategies for DNA methylation analysis

DNA methylation is one of the key epigenetic modifications of DNA that results from the enzymatic addition of a methyl group at the fifth carbon of the cytosine base. It plays a crucial role in cellular development, genomic stability and gene expression. Aberrant DNA methylation is responsible for the pathogenesis of many diseases including cancers. Over the past several decades, many methodologies have been developed to detect DNA methylation. These methodologies range from classical molecular biology and optical approaches, such as bisulfite sequencing, microarrays, quantitative real-time PCR, colorimetry, Raman spectroscopy to the more recent electrochemical approaches. Among these, electrochemical approaches offer sensitive, simple, specific, rapid, and cost-effective analysis of DNA methylation. Additionally, electrochemical methods are highly amenable to miniaturization and possess the potential to be multiplexed. In recent years, several reviews have provided information on the detection strategies of DNA methylation. However, to date, there is no comprehensive evaluation of electrochemical DNA methylation detection strategies. Herein, we address the recent developments of electrochemical DNA methylation detection approaches. Furthermore, we highlight the major technical and biological challenges involved in these strategies and provide suggestions for the future direction of this important field.

A review on amperometric-type immunosensors based on screen-printed electrodes

In this brief review, we summarize the recent research activities involved in the development of amperometric-type immunosensors based on screen-printed electrodes (SPEs). We focus on the underlying principle involved in these types of sensors, their fabrication and electrode surface modification. We also discuss the various factors involved in the designing of such immunosensors and how they affect their performances. Finally we provide an insight into the drawbacks associated with these SPEs.