Bioactive glass nanoparticles obtained through sol-gel chemistry

Gallium-containing mesoporous nanoparticles influence in-vitro osteogenic and osteoclastic activity

Mesoporous silica nanoparticles were synthesized using a microemulsion-assisted sol-gel method, and calcium, gallium or a combination of both, were used as dopants. The influence of these metallic ions on the physicochemical properties of the nanoparticles was investigated by scanning and transmission electron microscopy, as well as N2 adsorption-desorption methods. The presence of calcium had a significant impact on the morphology and textural features of the nanoparticles. The addition of calcium increased the average diameter of the nanoparticles from 80 nm to 150 nm, while decreasing their specific surface area from 972 m2/g to 344 m2/g. The nanoparticles of all compositions were spheroidal, with a disordered mesoporous structure. An ion release study in cell culture medium demonstrated that gallium was released from the nanoparticles in a sustained manner. In direct contact with concentrations of up to 100 μg/mL of the nanoparticles, gallium-containing nanoparticles did not exhibit cytotoxicity towards pre-osteoblast MC3T3-E1 cells. Moreover, in vitro cell culture tests revealed that the addition of gallium to the nanoparticles enhanced osteogenic activity. Simultaneously, the nanoparticles disrupted the osteoclast differentiation of RAW 264.7 macrophage cells. These findings suggest that gallium-containing nanoparticles possess favorable physicochemical properties and biological characteristics, making them promising candidates for applications in bone tissue regeneration, particularly for unphysiological or pathological conditions such as osteoporosis.

Cutting-edge developments in zinc oxide nanoparticles: synthesis and applications for enhanced antimicrobial and UV protection in healthcare solutions

This paper presents a comprehensive review of recent advancements in utilizing zinc oxide nanoparticles (ZnO NPs) to enhance antimicrobial and UV protective properties in healthcare solutions. It delves into the synthesis techniques of ZnO NPs and elucidates their antimicrobial efficacy, exploring the underlying mechanisms governing their action against a spectrum of pathogens. Factors impacting the antimicrobial performance of ZnO NPs, including size, surface characteristics, and environmental variables, are extensively analyzed. Moreover, recent studies showcasing the effectiveness of ZnO NPs against diverse pathogens are critically examined, underscoring their potential utility in combatting microbial infections. The study further investigates the UV protective capabilities of ZnO NPs, elucidating the mechanisms by which they offer UV protection and reviewing recent innovations in leveraging them for UV-blocking applications in healthcare. It also dissects the factors influencing the UV shielding performance of ZnO NPs, such as particle size, dispersion quality, and surface coatings. Additionally, the paper addresses challenges associated with integrating ZnO NPs into healthcare products and presents future perspectives for overcoming these hurdles. It emphasizes the imperative for continued research efforts and collaborative initiatives to fully harness the potential of ZnO NPs in developing advanced healthcare solutions with augmented antimicrobial and UV protective attributes. By advancing our understanding and leveraging innovative approaches, ZnO NPs hold promise for addressing pressing healthcare needs and enhancing patient care outcomes.

Silicon-containing nanomedicine and biomaterials: materials chemistry, multi-dimensional design, and biomedical application

The invention of silica-based bioactive glass in the late 1960s has sparked significant interest in exploring a wide range of silicon-containing biomaterials from the macroscale to the nanoscale. Over the past few decades, these biomaterials have been extensively explored for their potential in diverse biomedical applications, considering their remarkable bioactivity, excellent biocompatibility, facile surface functionalization, controllable synthesis, etc. However, to expedite the clinical translation and the unexpected utilization of silicon-composed nanomedicine and biomaterials, it is highly desirable to achieve a thorough comprehension of their characteristics and biological effects from an overall perspective. In this review, we provide a comprehensive discussion on the state-of-the-art progress of silicon-composed biomaterials, including their classification, characteristics, fabrication methods, and versatile biomedical applications. Additionally, we highlight the multi-dimensional design of both pure and hybrid silicon-composed nanomedicine and biomaterials and their intrinsic biological effects and interactions with biological systems. Their extensive biomedical applications span from drug delivery and bioimaging to therapeutic interventions and regenerative medicine, showcasing the significance of their rational design and fabrication to meet specific requirements and optimize their theranostic performance. Additionally, we offer insights into the future prospects and potential challenges regarding silicon-composed nanomedicine and biomaterials. By shedding light on these exciting research advances, we aspire to foster further progress in the biomedical field and drive the development of innovative silicon-composed nanomedicine and biomaterials with transformative applications in biomedicine.

Magnesium Ion-Doped Mesoporous Bioactive Glasses Loaded with Gallic Acid Against Myocardial Ischemia/Reperfusion Injury by Affecting the Biological Functions of Multiple Cells

Introduction

Excessive generation of reactive oxygen species (ROS) following myocardial ischemia-reperfusion (I/R) can result in additional death of myocardial cells. The rapid clearance of ROS after reperfusion injury and intervention during subsequent cardiac repair stages are crucial for the ultimate recovery of cardiac function.

Methods

Magnesium-doped mesoporous bioactive glasses were prepared and loaded with the antioxidant drug gallic acid into MgNPs by sol-gel method. The antioxidant effects of MgNPs/GA were tested for their pro-angiogenic and anti-inflammatory effects based on the release characteristics of GA and Mg2+ from MgNPs/GA. Later, we confirmed in our in vivo tests through immunofluorescence staining of tissue sections at various time points that MgNPs/GA exhibited initial antioxidant effects and had both pro-angiogenic and anti-inflammatory effects during the cardiac repair phase. Finally, we evaluated the cardiac function in mice treated with MgNPs/GA.

Results

We provide evidence that GA released by MgNPs/GA can effectively eliminate ROS in the early stage, decreasing myocardial cell apoptosis. During the subsequent cardiac repair phase, the gradual release of Mg2+ from MgNPs/GA stimulated angiogenesis and promoted M2 macrophage polarization, thereby reducing the release of inflammatory factors.

Conclusion

MgNPs/GA acting on multiple cell types is an integrated solution for comprehensive attenuation of myocardial ischaemia-reperfusion injury and cardiac function protection.

Bioinspired synthesis of bioactive glass nanocomposites for hyaluronic acid delivery to bone and skin

In this study, we present nanocomposites of bioactive glass (BG) and hyaluronic acid (HA) (nano-BGHA) for effective delivery of HA to skin and bone. The synthesis of the nanocomposites has been carried out through the bio-inspired method, which is a modification of the traditional Stober's synthesis as it avoids using ethanol, ammonia, synthetic surfactants, or high-temperature calcination. This environmentally friendly, bio-inspired route allowed the synthesis of mesoporous nanocomposites with an average hydrodynamic radius of ∼190 nm and an average net surface charge of ∼-21 mV. Most nanocomposites are amorphous and bioactive in nature with over 70 % cellular viability for skin and bone cell lines even at high concentrations, along with high cellular uptake (90-100 %). Furthermore, the nanocomposites could penetrate skin cells in a transwell set-up and artificial human skin membrane (StratM®), thus depicting an attractive strategy for the delivery of HA to the skin. The purpose of the study is to develop nanocomposites of HA and BG that can have potential applications in non-invasive treatments that require the delivery of high molecular weight HA such as in the case of osteoarthritis, sports injury treatments, eye drops, wound healing, and some anticancer treatments, if further investigated. The presence of BG further enhances the range to bone-related applications. Additionally, the nanocomposites can have potential cosmeceutical applications where HA is abundantly used, for instance in moisturizers, dermal fillers, shampoos, anti-wrinkle creams, etc.

Opportunities for Bioactive Glass in Gastrointestinal Conditions: A Review of Production Methodologies, Morphology, Composition, and Performance

Bioactive glasses (BGs) are widely used in orthopedic and dental applications for their ability to stimulate endogenous bone formation and regeneration. BG applications more recently broadened to include soft tissue conditions, based on their ability to stimulate angiogenesis, soft tissue regeneration, and wound healing. Sol-gel synthesis has helped facilitate this expansion, allowing formulators to tailor the morphological characteristics of the BG matrix. The effectiveness of BGs in skin wound healing is viewed as a gateway for their use as both a therapeutic and drug delivery platform in other soft tissue applications, notably gastrointestinal (GI) applications, which form the focus of this review. Recent changes in international guidelines for GI conditions shifted clinical objectives from symptom management to mucosal wound healing. The additional scrutiny of proton pump inhibitor (PPI) safety, increasing burden of disease, and financial costs associated with gastroesophageal reflux disease (GERD), peptic ulcer disease (PUD), and inflammatory bowel disease (IBD) open new clinical possibilities for BG. This narrative literature review intersects materials engineering, formulation science, and clinical practice, setting it apart from prior literature. Broadly, current evidence for BG applications in GI conditions is sparse and under-developed, which this review directly addresses. It explores and synthesizes evidence that supports the potential use of sol-gel-derived BG for the efficacious treatment of soft tissue applications, with specific reference to GI conditions. An overview with comparative analysis of current BG synthesis techniques and associated challenges is presented, and influences of composition, biologically active ions, and morphological characteristics in soft tissue applications are explored. To contextualize this, sol-gel-derived BGs are proposed as a dual, tailorable therapeutic and drug delivery platform for upper and lower GI conditions. Future directions for this largely untapped area of translational research are also proposed, based on extant literature.

Foliar Fertilization by the Sol-Gel Particles Containing Cu and Zn

Silica particles with the size of 150-200 nm containing Ca, P, Cu or Zn ions were synthesized with the sol-gel method and tested as a foliar fertilizer on three plant species: maize Zea mays, wheat Triticum sativum and rape Brassica napus L. var napus growing on two types of soils: neutral and acidic. The aqueous suspensions of the studied particles were sprayed on the chosen leaves and also on the whole tested plants. At a specific stage of plant development determined according to the BBCH (Biologische Bundesanstalt, Bundessortenamt und CHemische Industrie) scale, the leaves and the whole plants were harvested and dried, and the content of Cu and Zn was determined with the AAS (atomic absorption spectroscopy) method. The engineered particles were compared with a water solution of CuSO₄ and ZnSO₄ (0.1%) used as a conventional fertilizer. In many cases, the copper-containing particles improved the metal supply to plants more effectively than the CuSO₄. The zinc-containing particles had less effect on both the growth of plants and the metal concentration in the plants. All the tested particles were not toxic to the examined plants, although some of them caused a slight reduction in plants growth.

Solvothermally-derived nanoglass as a highly bioactive material

A highly bioactive glass solvBG76 in a binary system 76SiO₂-24CaO (wt%) was prepared following a solvothermal path of the synthesis. The facile synthesis, in terms of the steps and reagents needed, enabled the achievement of a mesoporous material. Many factors such as nano-size (<50 nm), different morphology (non-spherical), use of an unconventional network modifier (calcium hydroxide) during the synthesis, a structure free of crystalline impurities, and textural properties greatly enhanced the kinetic deposition process of hydroxyapatite (HA) when contacting with physiological fluids. The formation of a HA layer on the glass was analyzed by various techniques, namely XRD, IR-ATR, Raman, XPS, EDS analyses, SEM, and HR-TEM imaging. The results obtained were compared to the 45S5 glass tested as a reference biomaterial as well as 70S30C-a glass with similar size and composition to reported solvBG76 but obtained by the conventional sol-gel method. For the first time, superior apatite-mineralization ability in less than 1 h in a physiological-like buffer was achieved. This unique bioactivity is accompanied by biocompatibility and hemocompatibility, which was indicated by a set of various assays in human dermal fibroblasts and MC3T3 mouse osteoblast precursor cells, as well as hemolytic activity determination.

In vitro biomineralization potential in simulated wound fluid and antibacterial efficacy of biologically-active glass nanoparticles containing B2O3/ZnO

In the present study, SiO₂-CaO-B₂O₃-ZnO (SCBZ), SiO₂-CaO-B₂O₃ (SCB), SiO₂-CaO-ZnO (SCZ) and SiO₂-CaO (SC) silicate-based glasses were synthesized by the sol-gel method to elucidate the influence of B₂O₃ and ZnO substitution on glass characteristics aiming to further use in wound healing applications. The amorphous nature, spherical-shaped morphology and nano-sized primary particles of glasses were revealed by XRD and SEM analysis. Moreover, investigating the antibacterial activity of glasses against E.coli and S.aureus bacteria indicated the improved antibacterial properties of SCBZ glass against both bacterial strains compared with SCB and SCZ glasses. Assessment of ion release revealed that the incorporation of zinc induces a more stable glass network with a lower tendency to dissolution contrary to the incorporation of boron, which facilitated the dissolution of glass by the formation of more reactive SiOB and BO bonds. Glasses were immersed in Simulated Wound Fluid (SWF) to predict their mineralization susceptibility. Morphological studies and FTIR analysis showed the formation of cauliflower-like hydroxy-carbonated apatite on the surface of SCB and SC glasses after 14 days. In contrast, the presence of Zn in SCBZ and SCZ glasses inhibited the formation of crystalline apatite and induced the deposition of spherical-shaped amorphous apatite. Our study suggests that the co-incorporation of B and Zn in SCBZ glass make this material a potential multifunctional candidate for accelerating the healing of skin wounds.

Titanium-Containing Silicate-Based Sol-Gel Bioactive Glass: Development, Characterization, and Applications

Bioactive glasses are surface-reactive glasses that, when placed in physiological fluid, undergo a transformation from glass to hydroxyapatite. Doping the bioactive glass with metallic ions can impart desirable and unique properties that are not inherent to natural hydroxyapatite. Once such ion is titanium. Titanium exists in trace amounts in native dental enamel, and its presence has been correlated with increased tooth hardness and brightness, both desirable clinical properties. Synthetic titanium-substituted hydroxyapatite exhibits better mechanical and antibacterial properties and demonstrates potential for an improved cellular response when compared to unmodified hydroxyapatite with applications in the broader field of bone tissue engineering. In this work, we use the sol-gel method to synthesize a titanium-containing silicate-based bioactive glass aimed at generating titanium-substituted hydroxyapatite on the glass surface upon immersion in body fluid. Titanium is homogeneously distributed throughout our glass, which keeps its amorphous nature. After 14 days of immersion in simulated body fluid, the glass forms a titanium-substituted hydroxyapatite on its surface. Enamel surfaces treated with the titanium-containing glass show significantly increased microhardness compared to enamel surfaces treated with a control glass, confirming the potential for the proposed glass in enamel remineralization. We also show that the presence of titanium in the glass promotes cell differentiation toward bone formation, suggesting further applications for this material in the broader field of bone tissue engineering.

Anti-inflammatory and antibacterial activities of cerium-containing mesoporous bioactive glass nanoparticles for drug-free biomedical applications

Mesoporous bioactive glass nanoparticles (MBGNPs) are attracting significant attention as suitable materials for multifunctional biomedical applications. In this study, cerium was incorporated into MBGNPs using two different approaches. In the first approach, cerium was added to the glass system directly during the synthesis, while in the second approach, cerium was added to the as-synthesized MBGNPs via the template ion-exchange method. The influence of the method of synthesis on the physicochemical properties of nanoparticles was examined by SEM, TEM, XRD, FTIR, and N₂ adsorption-desorption analyses. The MBGNPs exhibited spheroidal morphology and disordered mesoporous structure. XRD analysis confirmed the amorphous nature of the nanoparticles. The chemical composition was determined by the acid digestion method using ICP-OES. The influence of the synthesis method on the specific surface area, mesoporosity, and solubility of synthesized nanoparticles in Tris/HCl (pH 7.4) and acetate (pH 4.5) buffer has also been studied. The obtained Ce containing MBGNPs were non-cytotoxic toward ​preosteoblast MC3T3-E1 cells in contact with nanoparticles in a concentration of up to 100 ​μg/mL. The anti-inflammatory effect of Ce containing MBGNPs was tested with lipopolysaccharides (LPS)-induced proinflammatory RAW 264.7 macrophage cells. Ce containing MBGNPs decreased the release of nitric oxide, indicating the anti-inflammatory response of macrophage cells. Ce containing MBGNPs also showed antibacterial activity against S. aureus and E. coli. The mentioned features of the obtained MBGNPs make them useful in a variety of biomedical applications, considering their biocompatibility, anti-inflammatory response, and enhanced antibacterial effect.

Effect of Bioactive Glass-Containing Light-Curing Varnish on Enamel Remineralization

This study aimed to evaluate the effect of novel experimental light-curing bioactive glass (BAG)-containing varnish on enamel remineralization. An experimental light-curing, BAG-containing varnish and two commercial varnishes (Nupro White Varnish; Dentsply International, York, PA, USA and Tooth Mousse; GC Corporation, Tokyo, Japan) were used. Microhardness tests (n = 3), field emission scanning electron microscopy (FE-SEM) coupled with energy dispersive X-ray spectroscopy (EDS) (n = 5), and X-ray diffraction (XRD) analysis (n = 5) were performed to compare the remineralization effect of three varnishes with and without ultrasonication. The data of microhardness test were analyzed using one-way ANOVA and Tukey's post hoc comparison (P < 0.05). Microhardness of demineralized enamel increased after the application of three varnishes (P < 0.05). The experimental BAG-containing varnish showed the highest microhardness among the three varnishes (P < 0.05). Ultrasonication decreased microhardness of Tooth Mousse and BAG-containing varnish groups (P < 0.05). FE-SEM and XRD revealed precipitates of hydroxyapatite (HAP) or fluorapatite (FAP) crystals of three varnishes. The novel experimental BAG-containing varnish may be a promising clinical strategy for the remineralization of early carious lesions or demineralized enamel surfaces.

In vitro comparisons of microscale and nanoscale calcium silicate particles

Calcium silicate (CaSi) materials have been used for bone repair and generation due to their osteogenic properties. Tailoring the surface chemistry and structure of CaSi can enhance its clinical performance. There is no direct comparison between microscale and nanoscale CaSi particles. Therefore, this article aimed to compare and evaluate the surface chemistry, structure, and in vitro properties of microscale CaSi (μCaSi) and nanoscale CaSi (nCaSi) particles synthesized by the sol-gel method and precipitation method, respectively. As a result, the semi-crystalline μCaSi powders were assemblies of irregular microparticles containing a major β-dicalcium silicate phase, while the amorphous nCaSi powders consisted of spherical particles with a size of 100 nm. After soaking in a Tris-HCl solution, the amount of Si ions released from nCaSi was higher than that released from μCaSi, but there was no significant difference in Ca ion release between the two CaSi particles. Compared to microscale CaSi (μCaSi), nanoscale CaSi (nCaSi) significantly enhanced the growth and differentiation of human mesenchymal stem cells (hMSC) and inhibited the function of RAW 264.7 macrophages. In the case of antibacterial activity against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus), nanoscale nCaSi displayed a higher bacteriostatic ratio, a greater growth inhibition zone and more reactive oxygen species (ROS) production than microscale μCaSi. The conclusion is that nanoscale CaSi had greater antibacterial and osteogenic activity compared to microscale CaSi. Next generation CaSi-based materials with unique properties are emerging to meet specific clinical needs.

Upconversion Luminescence of Silica-Calcia Nanoparticles Co-doped with Tm3+ and Yb3+ Ions

Looking for upconverting biocompatible nanoparticles, we have prepared by the sol-gel method, silica-calcia glass nanopowders doped with different concentration of Tm³⁺ and Yb³⁺ ions (Tm³⁺ from 0.15 mol% up to 0.5 mol% and Yb³⁺ from 1 mol% up to 4 mol%) and characterized their structure, morphology, and optical properties. X-ray diffraction patterns indicated an amorphous phase of the silica-based glass with partial crystallization of samples with a higher content of lanthanides ions. Transmission electron microscopy images showed that the average size of particles decreased with increasing lanthanides content. The upconversion (UC) emission spectra and fluorescence lifetimes were registered under near infrared excitation (980 nm) at room temperature to study the energy transfer between Yb³⁺ and Tm³⁺ at various active ions concentrations. Characteristic emission bands of Tm³⁺ ions in the range of 350 nm to 850 nm were observed. To understand the mechanism of Yb³⁺-Tm³⁺ UC energy transfer in the SiO₂-CaO powders, the kinetics of luminescence decays were studied.

Electrospun PCL Fiber Mats Incorporating Multi-Targeted B and Co Co-Doped Bioactive Glass Nanoparticles for Angiogenesis

Vascularization is necessary in tissue engineering to keep adequate blood supply in order to maintain the survival and growth of new tissue. The synergy of biologically active ions with multi-target activity may lead to superior angiogenesis promotion in comparison to single-target approaches but it has been rarely investigated. In this study, polycaprolactone (PCL) fiber mats embedded with B and Co co-doped bioactive glass nanoparticles (BCo.BGNs) were fabricated as a tissue regeneration scaffold designed for promoting angiogenesis. BCo.NBGs were successfully prepared with well-defined spherical shape using a sol-gel method. The PCL fiber mats embedding co-doped bioactive glass nanoparticles were fabricated by electrospinning using benign solvents. The Young’s moduli of the nanoparticle containing PCL fiber mats were similar to those of the neat fiber mats and suitable for scaffolds utilized in soft tissue repair approaches. The mats also showed non-cytotoxicity to ST-2 cells. PCL fiber mats containing BCo.BGNs with a relatively high content of B and Co promoted the secretion of vascular endothelial growth factor to a greater extent than PCL fiber mats with a relatively low B and Co contents, which demonstrates the potential of dual ion release (B and Co) from bioactive glasses to enhance angiogenesis in soft tissue engineering.

Characterization of Bioactive Glass Synthesized by Sol-Gel Process in Hot Water

Bioactive glass 70SiO2-30CaO (mol.%) was successfully synthesized by modified sol–gel in hot water without using an acid catalyst. TG-DSC analysis showed that the amorphous glass could be synthesized by sintering the sample at 700 °C for three hours. The N2 adsorption/desorption and TEM investigations highlighted that the synthetic glass had a mesoporous structure, consisting of spherical particles with sizes in the range of 11–20 nm. The specific surface area, pore volume, and average pore diameter of synthetic glass were 150.13 m2/g, 0.37 cm3/g, and 11.84 nm, respectively. Moreover, synthetic bioactive glass presented interesting bioactivity and good biocompatibility after in vitro experiments in simulated body fluid (SBF) and in cellular medium.

Bioactive Glass Nanoparticles for Tissue Regeneration

Sol-gel-derived bioactive glass nanoparticles have attracted special interest due to their potential as novel therapeutic and regenerative agents. Significant challenges are yet to be addressed. The fabrication of sol-gel-derived nanoparticles in binary and ternary systems with an actual composition that meets the nominal has to be achieved. This work addresses this challenge and delivers nanoparticles in a ternary system with tailored composition and particle size. It also studies how specific steps in the fabrication process can affect the incorporation of the metallic ions, nanoparticle size, and mesoporosity. Sol-gel-derived bioactive glass nanoparticles in the 62 SiO₂-34.5 CaO-3.2 P₂O₅ (mol %) system have been fabricated and characterized for their structural, morphological, and elemental characteristics using Fourier transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy associated with elemental analysis, transmission electron microscopy, and solid-state nuclear magnetic resonance. The fabricated nanoparticles were additionally observed to form the apatite phase when immersed in simulated body fluid. This work highlights the effect of the different processing variables, such as the nature of the solvent, the order in which reagents are added, stirring time, and the concentrations in the catalytic solution on the controlled incorporation of specific ions (e.g., P and Ca) in the nanoparticle network and particle size.

Recent advances and future perspectives of sol–gel derived porous bioactive glasses: a review

Sol–gel derived bioactive glasses have been extensively explored as a promising and highly porous scaffold materials for bone tissue regeneration applications owing to their exceptional osteoconductivity, osteostimulation and degradation rates.

Mesoporous bioactive glasses for bone healing and biomolecules delivery

Impact of bone diseases and injury is increasing at an enormous rate during the past decades due to increase in road traffic accidents and other injuries. Bioactive glasses have excellent biocompatibility and osteoconductivity that makes it suitable for bone regeneration. Researches and studies conducted on several bioactive glasses gives an insight on the need of multi-disciplinary approaches involving various scientific fields to attain its full potential. Of late, a next generation bioactive glass called as mesoporous bioactive glass (MBG) has been developed with higher specific surface area and control over mesoporous structure that presents a new material for bone regeneration. A brief discussion and overview on the potential use of MBG as a suitable material for bone tissue regeneration and biomolecule delivery is included. Additionally, possible control of the structural and functional property based on composition and fabrication techniques are also covered. According to recent researches, MBG-implant interaction with bone forming cells for cellular growth and differentiation as well as its effect on delivery of growth factor, both in vitro and in vivo, are optimistic; yet, the complete efficacy of this material is still to be explored. Hence, in this article we will review the current development and its applications for bone tissue engineering (TE).

Effect of ethanol/TEOS ratios and amount of ammonia on the properties of copper-doped calcium silicate nanoceramics

Calcium magnesium silicate glasses could be suggested for the synthesis of scaffolds for hard tissue regeneration, as they present a high residual glassy phase, high hardness values and hydroxyapatite-forming ability. The use of trace elements in the human body, such as Cu, could improve the biological performance of such glasses, as Cu is known to play a significant role in angiogenesis. Nano-bioceramics are preferable compared to their micro-scale counterparts, because of their increased surface area, which improves both mechanical properties and apatite-forming ability due to the increased nucleation sites provided, their high diffusion rates, reduced sintering time or temperature, and high mechanical properties. The aim of the present work was the evaluation of the effect of different ratios of Ethanol/TEOS and total amount of the inserted ammonia to the particle size, morphology and bioactive, hemolytic and antibacterial behavior of nanoparticles in the quaternary system SiO₂-CaO-MgO-CuO. Different ratios of Ethanol/TEOS and ammonia amount affected the size and morphology of bioactive nanopowders. The optimum materials were synthesized with the highest ethanol/TEOS ratio and ammonia amount as verified by the enhanced apatite-forming ability and antibacterial and non-hemolytic properties.

Deeper Insights into a Bioactive Glass Nanoparticle Synthesis Protocol To Control Its Morphology, Dispersibility, and Composition

The aim of this study was to investigate the effect of three synthesis parameters on the morphology and composition of nanosized binary bioactive glass particles (nBGPs) obtained through a modified Stöber process. Syntheses were conducted by varying only one parameter at a time while keeping the other parameters constant. As already mentioned in the literature, the ammonium hydroxide volume conditioned the size of the nanoparticles. Nonagglomerated monodispersed spherical particles with a diameter between 70 and 452 nm were produced. The quantity of calcium nitrate and the moment it was introduced in the sol had a tremendous impact on the quantity of calcium inserted and on the particle morphology and aggregation state. High Ca-content particles were obtained when the calcium precursor addition time was 1 h or less after the beginning of the sol-gel reaction but at the cost of a strong aggregation. A better control on the morphology, polydispersity and dispersibility of the nBGPs was achieved when the Ca(NO3)2 addition time was increased up to 6 h. However, a significant decrease of the quantity of Ca2+ inserted was also noticed. Using an intermediate (3 h) addition time, the quantity of calcium nitrate has been optimized to maximize the insertion of Ca2+ ions inside the silica particles. Finally, an optimum initial Ca/Si atomic ratio of 2, maximizing Ca insertion while limiting the salt quantity used, was found. It led to the synthesis of particles with a molar composition of 0.9SiO2-0.1CaO without any side effect on the particle stability and morphological characteristics.

Mesoporous bioactive glass nanoparticles doped with magnesium: drug delivery and acellular in vitro bioactivity

The effects of the magnesium doping of binary glass (Si–Ca) on particle texture, on the biomineralization process in simulated body fluid (SBF) as well as on drug loading and release were examined. For this purpose, magnesium-doped binary bioglass nanoparticles (85SiO₂–(15 − x)CaO–xMgO, with x = 1, 3, 5 and 10 mol%) were prepared by a base catalysed sol–gel method. N₂ adsorption isotherm analysis showed an enhancement in specific surface area as the Mg molar fraction increased. In addition, the FTIR spectra of the samples after soaking in SBF for various periods of time confirmed the presence of new chemical bonds related to the apatite phase, as was also confirmed by SEM observations. XRD patterns of the samples after soaking revealed that the crystallization to form a more stable apatite-like phase was hindered with increasing magnesium content in the glass composition. Furthermore, it was proved that the kinetics of drug release improved with increasing magnesium content. The porosity and the specific surface area were found to be responsible for this improvement.

The effects of the magnesium doping of binary glass (Si–Ca) on particle texture, on the biomineralization process in simulated body fluid (SBF) as well as on drug loading and release were examined.

Preparation and characterization of folic acid functionalized bioactive glass for targeted delivery and sustained release of methotrexate

We have successfully prepared a novel targeted drug delivery system, composed of folic acid (FA) as targeting molecule, methotrexate (MTX) as anticancer drug, and bioactive glass (BG) as carrier. The BG nanoparticles were synthesized by sol-gel method with the dodecylamine as template. The surface of BG nanoparticles was grafted with amino groups by (3-aminopropyl) triethoxysilane, then, FA and MTX were covalently conjugated to the surface of modified BG through amidation reaction, so FA functionalized BG (BG-FA) and targeted drug delivery system (MTX-BG-FA) were prepared. The physicochemical properties of BG, BG-NH₂ , and BG-FA were characterized by various methods, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, ultraviolet-visible, and so on. Moreover, the drug release results showed that the MTX-BG-FA had sustained release property because of the peptide bond between MTX and BG-FA. And the cytocompatibility evaluation demonstrated that the BG and BG-FA were biocompatible and BG-FA even could promote cell proliferation, while the MTX-BG-FA had high cytotoxicity owning to the sustained release of anticancer drug. From the above, it could be concluded that MTX-BG-FA could kill tumor cells targetedly and sustainedly, which made it a good cancer targeted therapy material. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 319-329, 2019.

Development of mesoporous bioactive glass nanoparticles and its use in bone tissue engineering

The incidence of bone disorders, from trauma, tissue degeneration due to ageing, pathological conditions to cancer, has been increasing. The pursuit for bone graft substitutes to assist in regenerating large bone defects is ever growing as a result of the shortage in conventional autografts and allografts, in addition to the associated risks of disease transmission. However, the use of alloplastic biomaterials is limited in clinical settings, as further investigations are required to address the properties of synthetic grafts to mimic the native bone tissue and deliver desirable biomolecules to facilitate bone regeneration. This review discusses the fundamental structure and properties of bone with the emphasis on organic and inorganic components that are important for the biomaterial design. The main focus will be on the advancement and usage of bioactive glass (BG) for bone tissue engineering due to its similarity to the natural inorganic constituent of bone. The various BG synthetic processes, modifications of composition, as well as the biomolecule delivery will be discussed in great detail. As the properties of BG are tuneable according to clinical needs, it creates a new paradigm in addition to displaying its superior potential for bone tissue engineering and translational medicine in the field of orthopedic surgery. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2878-2887, 2018.

Bottom-Up Assembly of Silica and Bioactive Glass Supraparticles with Tunable Hierarchical Porosity

We investigate the formation of spherical supraparticles with controlled and tunable porosity on the nanometer and micrometer scales using the self-organization of a binary mixture of small (nanometer scale) oxidic particles with large (micrometer scale) polystyrene particles in the confinement of an emulsion droplet. The external confinement determines the final, spherical structure of the hybrid assembly, while the small particles form the matrix material. The large particles act as templating porogens to create micropores after combustion at elevated temperatures. We control the pore sizes on the micrometer scale by varying the size of the coassembled polystyrene microspheres and produce supraparticles from both silica- and calcium-containing CaO/SiO₂ particles. Although porous supraparticles are obtained in both cases, we found that the presence of calcium ions substantially complicated the fabrication process since the increased ionic strength of the dispersion compromises the colloidal stability during the assembly process. We minimized these stability issues via the addition of a steric stabilizing agent and by mixing bioactive and silica colloidal particles. We investigated the interaction of the porous particles with bone marrow stromal cells and found an increase in cell attachment with increasing pore size of the self-assembled supraparticles.

Potential of Bioactive Glasses for Cardiac and Pulmonary Tissue Engineering

Repair and regeneration of disorders affecting cardiac and pulmonary tissues through tissue-engineering-based approaches is currently of particular interest. On this matter, different families of bioactive glasses (BGs) have recently been given much consideration with respect to treating refractory diseases of these tissues, such as myocardial infarction. The inherent properties of BGs, including their ability to bond to hard and soft tissues, to stimulate angiogenesis, and to elicit antimicrobial effects, along with their excellent biocompatibility, support these newly proposed strategies. Moreover, BGs can also act as a bioactive reinforcing phase to finely tune the mechanical properties of polymer-based constructs used to repair the damaged cardiac and pulmonary tissues. In the present study, we evaluated the potential of different forms of BGs, alone or in combination with other materials (e.g., polymers), in regards to repair and regenerate injured tissues of cardiac and pulmonary systems.

Sol-gel processing of bioactive glass nanoparticles: A review

Silicate-based bioactive glass nanoparticles (BGN) are gaining increasing attention in various biomedical applications due to their unique properties. Controlled synthesis of BGN is critical to their effective use in biomedical applications since BGN characteristics, such as morphology and composition, determining the properties of BGN, are highly related to the synthesis process. In the last decade, numerous investigations focusing on BGN synthesis have been reported. BGN can mainly be produced through the conventional melt-quench approach or by sol-gel methods. The latter approaches are drawing widespread attention, considering the convenience and versatility they offer to tune the properties of BGN. In this paper, we review the strategies of sol-gel processing of BGN, including those adopting different catalysts for initiating the hydrolysis and condensation of silicate precursors as well as those combining sol-gel chemistry with other techniques. The processes and mechanism of different synthesis approaches are introduced and discussed in detail. Considering the importance of the BGN morphology and composition to their biomedical applications, strategies put forward to control the size, shape, pore structure and composition of BGN are discussed. BGN are particularly interesting biomaterials for bone-related applications, however, they also have potential for other biomedical applications, e.g. in soft tissue regeneration/repair. Therefore, in the last part of this review, recently reported applications of BGN in soft tissue repair and wound healing are presented.

Bioactive mono-dispersed nanospheres with long-term antibacterial effects for endodontic sealing

Endodontic sealers with antibacterial capability play an important role in preventing reinfection of an endodontically treated root canal and improving the long-term success of root canal treatment. However, current endodontic sealers rapidly lose their antibacterial properties after fixation. In this work, we designed and synthesized quaternized mono-dispersed bioactive nanospheres as a potential substrate for the development of a long-term antibacterial endodontic sealer with excellent cytocompatibility and biocompatibility. First, mono-dispersed silica-based bioactive glass nanospheres (SBG-NS) were prepared via a modified sol-gel process. Next, a series of quaternary ammonium methacrylate salts (QAMs) with broad antibacterial spectra were synthesized and grafted onto the surfaces of the SBG-NS via a two-step coupling approach. The antibacterial effect of the quaternary ammonium polymethacrylate (QAPM)-containing SBG-NS (SBG-QAPM) against persistent microorganisms associated with infected root canals was evaluated using a direct contact test. Evaluations of the SBG-QAPM cytocompatibility and biocompatibility were performed using LIVE/DEAD staining, 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl-2, 5-tetrazoliumbromide (MTT) assay, and a calvarial implantation model. The results showed that the SBG-QAPMs had the strongest long-term antibacterial effect against the Enterococcus faecalis, Streptococcus mutans, and Streptococcus sanguis during the study period, the best cytocompatibility, and the lowest systemic inflammation compared to three commercial products: ProRoot MTA, Endomethasone C, and AH Plus. In addition, the SBG-QAPMs showed excellent stability in aqueous solution. This work indicates that the SBG-QAPMs are promising substrates for the development of long-term antibacterial endodontic sealers.

Biomedical applications of natural-based polymers combined with bioactive glass nanoparticles

The combination of natural polymers with nanoparticles allowed the development of functional bioinspired constructs. This review discusses the composition, design, and applications of bioinspired nanocomposite constructs based on bioactive glass nanoparticles (BGNPs).

ZnO quantum dots modified bioactive glass nanoparticles with pH-sensitive release of Zn ions, fluorescence, antibacterial and osteogenic properties

Zinc (Zn)-containing materials have osteogenic and antibacterial activities while bioactive glass nanoparticles (BGN) show bone-bonding ability, as well as osteoconductive and osteoinductive properties. Zn-containing BGN are therefore considered to be promising materials for various biomedical applications, particularly in bone regeneration. In this study, we report a convenient method to prepare Zn-containing BGN by coating ZnO quantum dots (QDs) on BGN via electrostatic interactions. The synthesized ZnO-BGN nanocomposite particles are spherical and highly dispersed, and exhibit a unique fluorescence behavior under UV excitation, emitting three wavelengths in the violet, blue and green range. ZnO-BGN showed apatite-forming ability upon immersion in simulated body fluid, but their apatite formation was delayed compared to BGN. Interestingly, ZnO-BGN showed a rapid release of Zn ions at pH 4 but a far slower release at pH 7.4. ZnO-BGN also exhibited antibacterial effects on both Gram-positive and Gram-negative bacteria at the concentrations of 1, 0.1, and 0.01 mg mL^-1. Higher concentrations could lead to stronger antibacterial effects. The LDH and live/dead assays indicated that ZnO-BGN had no significant cytotoxicity towards human mesenchymal stem cells (hMSC) at concentration of 0.1 and 0.01 mg mL^-1, but ZnO-BGN inhibited the relative proliferation of hMSC compared to BGN and the control according to the MTT assay. Notably ZnO-BGN improved the osteogenic differentiation of hMSC as indicated by the determination of the alkaline phosphatase activity. In conclusion, coating quantum dots on BGN is a promising strategy to produce Zn-containing BGN. The synthesized ZnO-BGN are potential materials for bone regeneration, considering their apatite-forming ability, unique ion-release behavior, effective antibacterial activity, non-cytotoxicity, and osteogenic potential.

Bioactive Glass Nanoparticles: From Synthesis to Materials Design for Biomedical Applications

Thanks to their high biocompatibility and bioactivity, bioactive glasses are very promising materials for soft and hard tissue repair and engineering. Because bioactivity and specific surface area intrinsically linked, the last decade has seen a focus on the development of highly porous and/or nano-sized materials. This review emphasizes the synthesis of bioactive glass nanoparticles and materials design strategies. The first part comprehensively covers mainly soft chemistry processes, which aim to obtain dispersible and monodispersed nanoparticles. The second part discusses the use of bioactive glass nanoparticles for medical applications, highlighting the design of materials. Mesoporous nanoparticles for drug delivery, injectable systems and scaffolds consisting of bioactive glass nanoparticles dispersed in a polymer, implant coatings and particle dispersions will be presented.

Timing of calcium nitrate addition affects morphology, dispersity and composition of bioactive glass nanoparticles

Bioactive glass nanoparticles (BGN) are promising materials for a number of biomedical applications.

Bioactive glasses beyond bone and teeth: emerging applications in contact with soft tissues

The applications of bioactive glasses (BGs) have to a great extent been related to the replacement, regeneration and repair of hard tissues, such as bone and teeth, and there is an extensive bibliography documenting the role of BGs as bone replacement materials and in bone tissue engineering applications. Interestingly, many of the biochemical reactions arising from the contact of BGs with bodily fluids, in particular the local increase in concentration of various ions at the glass-tissue interface, are also relevant to mechanisms involved in soft tissue regeneration. An increasing number of studies report on the application of BGs in contact with soft tissues, aiming at exploiting the well-known bioactive properties of BGs in soft tissue regeneration and wound healing. This review focuses on research, sometimes involving preliminary in vitro studies but also in vivo evidence, that demonstrates the suitability of BGs in contact with tissues outside the skeletal system, which includes studies investigating vascularization, wound healing and cardiac, lung, nerve, gastrointestinal, urinary tract and laryngeal tissue repair using BGs in various forms of particulates, fibers and nanoparticles with and without polymer components. Potentially active mechanisms of interaction of BGs and soft tissues based on the surface bioreactivity of BGs and on biomechanical stimuli affecting the soft tissue-BG collagenous bonding are discussed based on results in the literature.