Sequentially photocatalytic degradation of mussel-inspired polydopamine: From nanoscale disassembly to effective mineralization

Mussel-inspired polydopamine (PDA) coating has been utilized extensively as versatile deposition strategies that can functionalize surfaces of virtually all substrates. However, the strong adhesion, stability and intermolecular interaction of PDA make it inefficient in certain applications. Herein, a green and efficient photocatalytic method was reported to remove adhesion and degrade PDA by using TiO2-H2O2 as photocatalyst. The photodegradation process of the PDA spheres was first undergone nanoscale disassembly to form soluble PDA oligomers or well-dispersed nanoparticles. Most of the disassembled PDA can be photodegraded and finally mineralized to CO2 and H2O. Various PDA coated templates and PDA hollow structures can be photodegraded by this strategy. Such process provides a practical strategy for constructing the patterned and gradient surfaces by the "top-down" method under the control of light scope and intensity. This sequential degradation strategy is beneficial to achieve the decomposition of highly crosslinked polymers.

Preparation and characterization of polydopamine and n-butyl methacrylate copolymer coatings on titanium-nickel alloy stents

Cardiovascular diseases pose a significant global health threat, and stents play a crucial role in managing these diseases. However, challenges exist with respect to the poor adhesion of stent coatings. Cardiac stents are often composed of titanium-nickel (TiNi) alloys as the metallic component and poly(n-butyl methacrylate) (PBMA) as the coating. The poor adhesion of PBMA to TiNi alloy surface may cause detachment and subsequent thrombosis post-implantation. This study utilizes Reversible Addition-Fragmentation Chain Transfer (RAFT) polymerization to synthesize a novel block copolymer, PBMA-b-PVP, composed of PBMA and poly(N-vinylpyrrolidone) (PVP). TiNi alloy surfaces are functionalized with polydopamine (PDA) to enhance polymer coating adhesion. PBMA-b-PVP exhibits a remarkable improvement in adhesion from class 5 to class 0 and high coating stability after a 15 days immersion in a phosphate buffer solution. The corrosion current density is reduced by 44% with the incorporation of PDA into PBMA-b-PVP coatings, suggesting high corrosion resistance. PDA-functionalized coatings promote cell viability without cytotoxicity, suggesting high biocompatibility. This study provides a robust strategy for preparing stent coatings with high adhesion, corrosion resistance, and biocompatibility.

Nanofluidic diodes based on asymmetric bio-inspired surface coatings in straight glass nanochannels

In this study, we present nanofluidic diodes fabricated from straight glass nanochannels and functionalized using bio-inspired polydopamine (PDA) and poly-L-lysine (PLL) coatings. The resulting PDA coatings are shown to be asymmetric due to a combination of transport considerations which can be leveraged to provide a measure of control over the effective channel geometry. By subsequently introducing a layer of amine-bearing PLL chains covalently bound to the PDA, we enhance heterogeneities in the charge and ion distributions within the channel and enable significant current rectification between forward-bias and reverse-bias modes; our PDA-PLL-coated channels yielded a rectification ratio greater than 1000 in a 100 nm channel filled with 0.01× phosphate-buffered saline solution (PBS). We further demonstrated that at higher ionic strength conditions, reducing the solution pH increased the number of protonated amines within the PLL layer, amplifying the charge disparities along the channel and leading to greater rectification. As nanofluidic diodes with bipolar surface charge distributions tend to provide superior performance compared to those with a single wall charge polarity, we imposed a more bipolar charge distribution in our devices by partially coating our PDA-PLL-coated channels with negatively charged polyacrylic acid (PAA). These enhanced bipolar channels exhibited greater current rectification than the PDA-PLL-coated channels, reaching rectification ratios in excess of 100 even in more physiologically-relevant 1× PBS solutions. Our fabrication approach and the results herein provide a promising platform from which the scientific community can build upon in the relentless endeavor for improved sensitivity in biosensors and other analytical devices.

Mussel inspired synthesis of polydopamine/polyethyleneimine-grafted fly ash composite adsorbent for the effective separation of U(VI)

Polydopamine/polyethyleneimine-grafted fly ash composite (PDA/PEI/FA), an efficient multifunctional adsorbent for U(VI) with excellent separation efficiency (94.5 %) and capacity (422.5 mg/g), was synthesized by grafting PDA and PEI on FA via Mussel inspiration and Michael addition reaction. The introduction of PDA and PEI had brought numerous functional groups with fine affinities to uranium, like catechol, amino and imino, causing good U(VI) separation performances. Langmuir and Pseudo-second-order models were well matched with experimental data, illustrating the U(VI) separation on PDA/PEI/FA was a homogeneous chemical adsorption process. After five cycles, the U(VI) adsorption efficiency for PDA/PEI/FA was still up to 90.2 %, implying that PDA/PEI/FA possessed good stability and reusability. Besides, the good dynamic adsorption performances of PDA/PEI/FA further demonstrated that PDA/PEI/FA was an ideal adsorbent for the practical wastewater treatment. According to the characterization results, U(VI) was absorbed by PAD/PEI/FA through complexation, redox reaction, electrostatic attraction and hydrogen bonding. Given the above, PDA/PEI/FA showed good practical application prospect in U(VI) separation.

Application Process of Coating Agent and the Coating Effect Evaluation Based on Molecular Dynamics

In the field of energy-containing materials, the modification of nanoaluminum powders has been widely studied. However, in modified experimental design, the lack of theoretical prediction usually leads to long experimental cycles and high resource consumption. To this end, this study evaluated the process and effect of dopamine (PDA)- and polytetrafluoroethylene (PTFE)-modified nanoaluminum powders based on molecular dynamics (MD). Through the calculation of the coating stability, compatibility, and oxygen barrier performance of the modified material, the modification process and effect were explored from a microscopic point of view. The results showed that the adsorption of PDA on the nanoaluminum was the most stable, and the binding energy was 463.03 kcal·mol^-1. PDA and PTFE with different ratios are compatible systems at 350 K, and the best compatibility ratio is 10 wt % PTFE/90 wt % PDA. The 90 wt % PTFE/10 wt % PDA bilayer model has the best barrier performance for oxygen molecules in a wide temperature range. The calculated results of the coating stability agree with the experiments, and it is pointed out that it is feasible to evaluate the modification effect in advance by MD simulation. In addition, the simulation results concluded that the double-layered PDA and PTFE have better oxygen barrier properties. Compatibility can be used only to determine whether phase separation occurs between mixtures and is not directly related to the dense mixing of polymers and the barrier properties of small gas molecules. The simulation provided in this article can predict the experimental results and provide theoretical guidance for coating modification experiments in order to reduce unnecessary experiments, shorten the experimental cycle, and reduce costs.

Oxygen-evolving hollow polydopamine alleviates tumour hypoxia for enhancing photodynamic therapy in cancer treatment

Hypoxia, a characteristic hallmark of solid tumours, restricts the therapeutic effect of photodynamic therapy (PDT) for cancer treatment. To address this issue, a facile and nanosized oxygen (O2) bubble template is established by mixing oxygenated water and water-soluble solvents for guiding hollow polydopamine (HPDA) synthesis, and O2 is encapsulated in the cavity of HPDA. HPDA with abundant catechol is designed as a carrier for zinc phthalocyanine (ZnPc, a boronic acid modified photosensitizer) via borate ester bonds to fabricate nanomedicine (denoted as HZNPs). The in vitro and in vivo results indicate that O2-evolving HZNPs could alleviate tumour hypoxia and enhance PDT-anticancer efficiency. Melanin-like HPDA with a photothermal conversion rate (η) of 38.2% shows excellent synergistic photothermal therapy (PTT) efficiency in cancer treatment.

Precisely controlled polydopamine-mediated antibacterial system: mathematical model of polymerization, prediction of antibacterial capacity, and promotion of wound healing

In this work, the polydopamine (PDA)-mediated antibacterial system is synthesized to carry out antimicrobial activities in vitro and in vivo. First, to precisely control the surface modification of nanodiamonds (NDs), a mathematical kinetics model of PDA deposition is established, and the conditions of synthesis reaction are discussed including influencing factors such as the concentrations of dopamine, reaction time, and the kinetic constant k1, which is a function of several variables associated with the reaction temperature, light irradiance (especially at ultraviolet wavelengths), pH value and concentration of dissolved O2 in the solution. A simulated visualization demonstrates that the deposition thickness of PDA is positively correlated with temperature and light irradiance, and PDA is easier to deposit in an alkaline solution and will be terminated if the dissolved O2 is insufficient. Then, the precisely controlled thickness of PDA can control the growth of AgNPs, rendering the intensity of Raman peaks increased and providing a predictable antibacterial effect against E. coli in vitro. An optimized antibacterial hydrogel containing NDs-PDA/Ag is prepared and characterized by the Fourier transform infrared spectroscopy and field emission scanning electron microscopy. Finally, the antibacterial experiments to promote wound healing in vivo are performed, which are verified by pathological and immunohistochemical-stained sections. This work provides a theoretical basis of predicting the PDA-assisted surface modification of NDs, giving a divinable antibacterial effect, and promoting wounds healing in vivo.

From Sticky to Slippery: Self-Functionalizing Lubricants for In Situ Fabrication of Liquid-Infused Surfaces

Liquid-infused surfaces offer a versatile approach to create self-cleaning coatings. In such coatings, a thin film of a fluid lubricant homogeneously coats the substrate and thus prevents direct contact with a second, contaminating liquid. For stable repellency, the interfacial energies need to be controlled to ensure that the lubricant is not replaced by the contaminating liquid. Here, we introduce the concept of self-functionalizing lubricants. Functional molecular species that chemically match the lubricant but possess selective anchor groups are dissolved in the lubricant and self-adhere to the surface, forming the required surface chemistry in situ from within the applied lubricant layer. To add flexibility to the self-functionalizing concept, the substrate is first primed with a thin polydopamine base layer, which can be deposited to nearly any substrate material from aqueous solutions and retains reactivity toward electron-donating groups such as amines. The temporal progression of the in situ functionalization is investigated by ellipsometry and quartz crystal microbalance and correlated to macroscopic changes in contact angle and contact angle hysteresis. The flexibility of the approach is underlined by creating repellent coatings with various substrate/lubricant combinations. The prepared liquid-infused surfaces significantly reduce cement adhesion and provide easy-to-clean systems under real-world conditions on shoe soles.

Versatile Polymer Nanocapsules via Redox Competition

Polymer nanocapsules have demonstrated significant value in materials science and biomedical technology, but require complicated and time-consuming synthetic steps. We report here the facile synthesis of monodisperse polymer nanocapsules via a redox-mediated kinetic strategy from two simple molecules: dopamine and benzene-1,4-dithiol (BDT). Specifically, BDT forms core templates and modulates the oxidation kinetics of dopamine into polydopamine (PDA) shells. These uniform nanoparticles can be tuned between ≈70 and 200 nm because the core diameter directly depends on BDT while the shell thickness depends on dopamine. The supramolecular core can then rapidly disassemble in organic solvents to produce PDA nanocapsules. Such nanocapsules exhibit enhanced physicochemical performance (e.g., loading capacity, photothermal transduction, and anti-oxidation) versus their solid counterparts. Particularly, this method enables a straightforward encapsulation of functional nanoparticles providing opportunities for designing complex nanostructures such as yolk-shell nanoparticles.

Ultrasound expands the versatility of polydopamine coatings

Polydopamine (PDA) coating of surfaces is a versatile strategy to fabricate functional films on various substrates, which typically requires oxygen and alkaline pH. Overcoming such limitations may enhance the versatility of this technique. Herein, we develop a simple and green sonochemical process for PDA coatings, which overcomes the limitations of traditional coating technique and expands the versatility of PDA chemistry. The oxidizing radicals generated by high frequency ultrasound (412 kHz) are utilized to initiate and accelerate the polymerization of dopamine. The sonochemical rate of film deposition is found to be about twice faster than that of the traditional method in the presence of oxygen. Importantly, the PDA coatings can be obtained in neutral or acidic aqueous solutions and even in the absence of oxygen. The PDA coatings can be moderated by turning on or off high frequency ultrasound. This study provides an environmentally friendly and economic method for the engineering of PDA coatings independent of the solution pH and nature of dissolved gas.

Electrochemically mediated gradient metallic film generation

Metallic films with a controlled gradient can be fabricated on substrates via electrochemically induced metallic ion deposition.

Material-Selective Polydopamine Coating in Dimethyl Sulfoxide

Polydopamine coating is known to be performed in a material-independent manner and has become a popular tool when designing a surface-functionalization strategy of a given material. Studies to improve polydopamine coatings have been reported, aiming to reduce the coating time (by transition metals, oxidants, applied voltages, or microwave irradiation), control surface roughness using catechol derivatives, and vary the ad-layer molecules formed on an underlying polydopamine layer. However, none of the techniques have changed the most important intrinsic property of polydopamine, the surface-independent coating. Currently, no method has been reported to modify this property to create a material-selective 'smart' polydopamine coating. Herein, we report a method with polydopamine to differentiate the chemistry of surfaces. We found that the polydopamine coating was largely inhibited on silicon-containing surfaces such as Si wafers and quartz crystals in a dimethyl sulfoxide (DMSO)/phosphate-buffered saline (PBS) cosolvent, while the coating properties on other materials remained mostly unchanged. Among the various interface bonding mechanisms of coordination, namely, cation-π, π-π stacking, and hydrogen-bonding interactions, the DMSO/PBS cosolvent effectively inhibits hydrogen-bond formation between catechol and SiO₂, resulting in surface-selective 'smart' polydopamine coatings. The new polydopamine coating is useful for functionalizing patterned surfaces such as Au patterns on SiO₂ substrates. Considering that Si wafer is the most widely used substrate, the surface-selective polydopamine coating technique described herein opens up a new direction in surface functionalization and interface chemistry.

A novel Fe3+-stabilized magnetic polydopamine composite for enhanced selective adsorption and separation of Methylene blue from complex wastewater

Herein, a novel Fe³⁺-stabilized magnetic polydopamine composite (Fe₃O₄/PDA-Fe³⁺) was facilely constructed, systematically characterized, and subsequently applied for the first time as a versatile adsorbent for treatment of Methylene blue (MB) in complex wastewater. Results showed that as-prepared material had prominent adsorption ability toward MB in its single dye solution over a wide pH range (3-10) with q_max value of 608.8 mg/g at 318 K. More interestingly, MB could be selectively captured by resulting adsorbent from mixed dye solutions (MB-cationic dye and MB-anionic dye) and complex aqueous solution with high ionic strength up to 0.5 mol/L NaCl. It was eventually revealed that the enhanced and selective adsorption of MB by as-resultant adsorbent was due to the synergistic effects between multiple uptake mechanisms. What's more, its adsorption efficiency toward MB in simulated wastewater still maintained higher than 80 % of its original uptake performance after several runs of adsorption-desorption. Additionally, it exhibited more superior uptake performance toward MB than commercial powder activated carbon (PAC) in column adsorption system. Thus, the outstanding sorption ability, unique capture selectivity, as well as excellent stability and recyclability for model wastewater endow it a promising candidate adsorbent for selective adsorption and separation of MB from complex wastewater.

Fast Polymerization of Polydopamine Based on Titanium Dioxide for High-Performance Flexible Electrodes

Dopamine (DA) and its derivatives are promising for the fabrication of functional films and devices with excellent conductivity and long-term stability; nevertheless its polymerization process is typically prolonged. We have proposed the accelerated deposition process using ultraviolet (UV) irradiation with the existence of nanotitanium dioxide (nano-TiO₂) in order to realize the rapid and stable synthesis of polydopamine (PDA) films. The in situ deposition process of nanostructured coatings such as platinum nanowire (PtNW) was also proposed by reducing the time of polymerization process to less than 1 h. It also increased the platinum (Pt) chelating rate with PDA, which was about 12 times faster than the traditional photo-oxidation method. Compared with the electrodes of the same size based on Ti/Pt sputtering, the impedance of the proposed PDA/TiO₂/PtNW coated electrode was as low as 0.0968 ± 0.0054 kΩ at 1 kHz (reduction of 99.74%). An extremely high cathodic charge storage capacity (CSC_c) up to 234.4 ± 3.16 mC cm^-2 was also observed, which was about 106.5 and 1.6 times higher than that of Ti/Pt and PDA/PtNW electrodes, respectively. In addition to that, significant photocurrent polarization responses were presented for PDA/TiO₂/PtNW electrodes with a stable current of -136.1 μA, exhibiting excellent charge transfer and UV absorption capacities. This co-deposition method has demonstrated great potential to speed up the polymerization process and enhance the electrical performance for flexible electrodes.

Investigation of the Oxidation Mechanism of Dopamine Functionalization in an AZ31 Magnesium Alloy for Biomedical Applications

Implant design and functionalization are under significant investigation for their ability to enhance bone-implant grafting and, thus, to provide mechanical stability for the device during the healing process. In this area, biomimetic functionalizing polymers like dopamine have been proven to be able to improve the biocompatibility of the material. In this work, the dip coating of dopamine on the surface of the magnesium alloy AZ31 is investigated to determine the effects of oxygen on the functionalization of the material. Two different conditions are applied during the dip coating process: (1) The absence of oxygen in the solution and (2) continuous oxygenation of the solution. Energy dispersive spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR) are used to analyze the composition of the formed layers, and the deposition rate on the substrate is determined by molecular dynamic simulation. Electrochemical analysis and cell cultivation are performed to determine the corrosion resistance and cell’s behavior, respectively. The high oxygen concentration in the dopamine solution promotes a homogeneous and smooth coating with a drastic increase of the deposition rate. Also, the addition of oxygen into the dip coating process increases the corrosion resistance of the material.

Deposition of Aminomalononitrile-Based Films: Kinetics, Chemistry, and Morphology

In the last few years, the development of versatile coating chemistries has become a hot topic in surface science after the discovery that catecholamines can lead to conformal coatings upon oxidation from aqueous solutions. Recently, it was found that aminomalononitrile (AMN), a molecule implicated in the appearance of life on earth, is an excellent prototype of novel material-independent surface functionalizing agents leading to conformal and biocompatible coatings in a simple and direct chemical process from aqueous solutions. So far, very little insight has been gained regarding the mechanisms underlying coating deposition. In this paper, we show that the chemical evolution of AMN film deposition under slightly basic conditions is different in solution and on silica. Thereon, the coating proceeds via a nucleation process followed by further deposition of islands which evolve to produce nitrogen-rich superhydrophilic fibrillar structures. Additionally, we show that AMN-based material can form films at the air-solution interface from unshaken solutions. These results open new vistas into the chemistry of HCN-derived species of potential relevance in materials science.

Material-Independent Surface Chemistry beyond Polydopamine Coating

Various methods have been developed in surface chemistry to control interface properties of a solid material. A selection rule among surface chemistries is compatibility between a surface functionalization tool and a target material. For example, alkanethiol deposition on noble metal surfaces, widely known as the formation of a self-assembled monolayer (SAM), cannot be performed on oxide material surfaces. One must choose organosilane molecules to functionalize oxide surfaces. Thus, the surface chemistry strictly depends on the properties of the surface. Polydopamine coating is now generally accepted as the first toolbox for functionalization of virtually any material surface. Layer-by-layer (LbL) assembly is a widely used method to modify properties of versatile surfaces, including organic materials, metal oxides, and noble metals, along with polydopamine coating. On flat solid substrates, the two chemistries of polydopamine coating and LbL assembly provide similar levels of surface modifications. However, there are additional distinct features in polydopamine. First, polydopamine coating is effective for two- or three-dimensional porous materials such as metal-organic frameworks (MOFs), synthetic polyolefin membranes, and others because small-sized dopamine (MW = 153.18 u) and its oxidized oligomers are readily attached onto narrow-spaced surfaces without exhibiting steric hindrance. In contrast, polymers used in LbL assembly are slow in diffusion because of steric hindrance due to their high molecular weight. Second, it is applicable to structurally nonflat surfaces showing special wettability such as superhydrophobicity or superoleophobicity. Third, a nonconducting, insulating polydopamine layer can be converted to be a conducting layer by pyrolysis. The product after pyrolysis is a N-doped graphene-like material that is useful for graphene or carbon nanotube-containing composites. Fourth, it is a suitable method for engineering the surface properties of various composite materials. The surface properties of participating components in composite materials can be unified by polydopamine coating with a simple one-step process. Fifth, a polydopamine layer exhibits intrinsic chemical reactivity by the presence of catecholquinone moieties and catechol radical species on surfaces. Nucleophiles such as amine and thiolate spontaneously react with the functionalized layer. Applications of polydopamine coating are exponentially growing and include cell culture/patterning, microfluidics, antimicrobial surfaces, tissue engineering, drug delivery systems, photothermal therapy, immobilization of photocatalysts, Li-ion battery membranes, Li-sulfur battery cathode materials, oil/water separation, water detoxification, organocatalysts, membrane separation technologies, carbonization, and others. In this Account, we describe various polydopamine coating methods and then introduce a number of chemical derivatives of dopamine that will open further development of material-independent surface chemistry.

Bioinspired Modification of Layer-Stacked Molybdenum Disulfide (MoS2) Membranes for Enhanced Nanofiltration Performance

Inorganic nanofiltration membranes with high flux are urgently needed in water purification processes. Herein, polydopamine (PDA)-modified layer-stacked molybdenum disulfide (MoS2) nanofiltration membranes (NFMs) were fabricated via a pressure-assisted self-assembly process. The separation performance of the as-prepared membranes with various MoS2 loadings at different dopamine polymerization times was evaluated. The pure water permeance of PDA-modified MoS2 NFMs, with MoS2 loading of 0.1103 mg/cm2 at 4 h modification, could reach 135.3 LMH/bar. The rejection toward methylene blue could reach 100% with molecular weight cutoff approximately 671 Da and a high permeability of salts. Furthermore, the resultant membrane also exhibited a satisfactory long-term stability toward dye solution and antifouling property toward bovine serum albumin. This work may give inspiration to the development of inorganic membranes with high performance, especially high pure water permeance, for water-related processes.

Magnetic digital microfluidics on a bioinspired surface for point-of-care diagnostics of infectious disease

Magnetic digital microfluidics uses magnetic force to manipulate droplets on a Teflon-coated substrate through the added magnetic particles. To achieve a wide range of droplet manipulation, hydrophilic patterns, known as surface energy traps, are introduced onto the Teflon-coated hydrophobic substrate. However, the Teflon-coated substrate is difficult to modify because it is nonwettable, and existing techniques for patterning surface energy traps have many limitations. Inspired by the mussel adhesion mechanism, we use polydopamine, a bioinspired substance that adheres strongly to almost any materials, to pattern surface energy traps on the Teflon-coated substrate with a great ease. We have optimized the polydopamine coating protocol and characterized the surface properties of the polydopamine surface energy traps. Droplet operations including particle extraction, liquid dispensing, liquid shaping, and cross-platform transfer have been demonstrated on the polydopamine surface energy trap-enabled magnetic digital microfluidic platform in both single-plate and two-plate configurations. Furthermore, the detection of hepatitis B surface antigen using ELISA has been demonstrated on the new magnetic dgitial microfluidic platform. This new bioinspired magnetic digital microfluidic platform is easy to fabricate and operate, showing a great potential for point-of-care applications.

Tuning the Reactivity of Metastable Intermixed Composite n-Al/PTFE by Polydopamine Interfacial Control

The metastable intermixed composite (MIC) is one of the most popular research topics in the field of energetic materials (EMs). The goal is to invent EMs with tunable reactivity and desired energy content. However, it is very difficult to tune the reactivity of MIC due to its high reactivity and sensitivity caused by enlarged specific surface area and intimate contact between the oxidizers and fuels. Herein, we demonstrated a facile fabrication method that can be used to control the reactivity between the nanoaluminum (n-Al) and poly(tetrafluoroethylene) (PTFE) using an in situ-synthesized polydopamine (PDA) binding layer. It was found that PDA can adhere to both n-Al and PTFE particles, resulting in integrated n-Al@PDA/PTFE MICs. In comparison with traditional n-Al/PTFE MICs, the n-Al@PDA/PTFE showed an increased energy release and reduced sensitivity and more importantly tunable reactivity. By regulating the experimental conditions of coating, the thickness of PDA could be well controlled, which makes the tunable reactivity of n-Al@PDA/PTFE possible. The PDA interfacial layer may increase the preignition reaction (PIR) heat of Al₂O₃/PTFE and therefore the overall reaction heat of n-Al/PTFE. It also reveals that the PDA interfacial layer postponed the PIR, leading to an increase in onset thermal decomposition temperature ( T_o). As T_o increased, a more complete reaction between PTFE and Al nanoparticles could be achieved.

Gradient Polydopamine Coating: A Simple and General Strategy toward Multishape Memory Effects

Multi shape memory polymers (multi-SMPs) exhibit many potential applications such as aerospace, soft robotics, and biomedical devices because of their unique abilities. Although many works are done to broaden the preparations of multi-SMPs, the desire to a simple and versatile strategy as well as more complex shapes still exists. Moreover, a light-induced SMP shows more advantages than a thermal-induced one in many practical working circumstances. Herein, inspired by strong adhesion and efficient photothermal conversion of polydopamine (PDA) coating, we report a more simple and facile approach to prepare light-induced multi-SMPs by introducing a gradient PDA coating on a dual-SMP through time-controlled dipping. The photothermal converting properties with varying thicknesses of PDA under the tunable near-infrared light source are investigated. Then, light-induced multishape memory effects based on gradient PDA coatings are illustrated, where three designs of multi-SMPs - rectangle, triangle, and cross are prepared and demonstrated. Also, the evolutions of coating morphology during shape shifting are carefully studied. Finally, we present few complex designs of patterns and shapes as well as a design of potential application for the highly controllable smart devices. This strategy demonstrates a very simple and general strategy to design and prepare the light-induced multi-SMPs with complex shapes based on any thermal-responsive dual-SMPs.

Recent progress in the biomedical applications of polydopamine nanostructures

Polydopamine is a dark brown-black insoluble biopolymer produced by autoxidation of dopamine. Although its structure and polymerization mechanism have not been fully understood, there has been a rapid growth in the synthesis and applications of polydopamine nanostructures in biomedical fields such as drug delivery, photothermal therapy, bone and tissue engineering, and cell adhesion and patterning, as well as antimicrobial applications. This article is dedicated to reviewing some of the recent polydopamine developments in these biomedical fields. Firstly, the polymerization mechanism is introduced with a discussion of the factors that influence the polymerization process. The discussion is followed by the introduction of various forms of polydopamine nanostructures and their recent applications in biomedical fields, especially in drug delivery. Finally, the review is summarized followed by brief comments on the future prospects of polydopamine.

Mussel-Inspired Coating and Adhesion for Rechargeable Batteries: A Review

A significant effort is currently being invested to improve the electrochemical performance of classical lithium-ion batteries (LIBs) or to accelerate the advent of new chemistry-based post-LIBs. Regardless of the governing chemistry associated with charge storage, stable electrode-electrolyte interface and wet-adhesion among the electrode particles are universally desired for rechargeable batteries adopting liquid electrolytes. In this regard, recent studies have witnessed the usefulness of mussel-inspired polydopamine or catechol functional group in modifying the key battery components, such as active material, separator, and binder. In particular, the uniform conformal coating capability of polydopamine protects active materials from unwanted side reactions with electrolytes and increases the wettability of separators with electrolytes, both of which significantly contribute to the improvement of key battery properties. The wet-adhesion originating from catechol functional groups also largely increases the cycle lives of emerging high-capacity electrodes accompanied by huge volume expansion. This review summarizes the representative examples of mussel-inspired approaches in rechargeable batteries and offers central design principles of relevant coating and adhesion processes.

Polydopamine Surface Chemistry: A Decade of Discovery

Polydopamine is one of the simplest and most versatile approaches to functionalizing material surfaces, having been inspired by the adhesive nature of catechols and amines in mussel adhesive proteins. Since its first report in 2007, a decade of studies on polydopamine molecular structure, deposition conditions, and physicochemical properties have ensued. During this time, potential uses of polydopamine coatings have expanded in many unforeseen directions, seemingly only limited by the creativity of researchers seeking simple solutions to manipulating surface chemistry. In this review, we describe the current state of the art in polydopamine coating methods, describe efforts underway to uncover and tailor the complex structure and chemical properties of polydopamine, and identify emerging trends and needs in polydopamine research, including the use of dopamine analogs, nitrogen-free polyphenolic precursors, and improvement of coating mechanical properties.

Guided protein/cell patterning on superhydrophilic polymer brushes functionalized with mussel-inspired polydopamine coatings

A simple approach for preparing bicomponent polymer patterns was developed by coating polydopamine (PDA) on superhydrophilic poly(2-acryl-amido-2-methylpropane sulfonic acid) (PAMPS) brushes. Well-defined and versatile arrays of proteins and cells were achieved without harm to proteins and cells.

Gradient Coating of Polydopamine via CDR

Surfaces with gradient properties are of central importance for a number of chemical and biological processes. Here, we report rapid generation of a polydopamine (PDA) gradient on hydrophobic surfaces by a simple, low cost, and general technology, cyclic draining-replenishing (CDR). Due to the unique surface chemistry of PDA, it enables continuous and precise control of surface wettability and subsequent deposition of organic and inorganic compounds. Using kanamycin as a model compound, we show that the gradient PDA membrane potentially can be used to prepare minimum inhibitory concentration (MIC) test strips for quantifying resistance of antimicrobial agents from microorganisms. Because CDR is experimentally simple, scalable, fast, and does not require specialized reagents or instruments, we envision this platform can be easily adopted to create a variety of functional surfaces.

Robust Alginate-Catechol@Polydopamine Free-Standing Membranes Obtained from the Water/Air Interface

The formation of polydopamine composite membranes at the water/air interface using different chemical strategies is reported. The use of either small molecules (urea, pyrocatechol) or polymers paves the way to understand which kind of compounds can be used for the formation of PDA-composite free-standing membranes produced at the water/air interface. On the basis of these screening results, we have found that alginate grafted with catechol groups allows the formation of robust free-standing films with asymmetric composition, stimuli-responsiveness, and self-healing properties. The stickiness of these membranes depends on the relative humidity, and its adhesion behavior on PDMS was characterized using the JKR method. Thus, alginate-catechol polydopamine films appear as a new class of PDA composites, mechanically robust through covalent cross-linking and based on fully biocompatible constituting partners. These results open the door to potential applications in the biomedical field.

Janus Membranes with Opposing Surface Wettability Enabling Oil-to-Water and Water-to-Oil Emulsification

A Janus membrane with opposing wettability was first reported with both function of water-to-oil and oil-to-water emulsification. This membrane is conveniently fabricated by single-surface deposition of polydopamine/polyethylenimine (PDA/PEI). The asymmetric wettability can also reduce the transmembrane resistance during the process, indicating an economical and promising strategy to prepare various emulsions. This research opens a novel avenue for exploring and understanding the Janus membrane, and provides a perspective to design the asymmetric membrane structures with promoted performance in conventional membrane processes.

Microwave-Accelerated Rapid, Chemical Oxidant-Free, Material-Independent Surface Chemistry of Poly(dopamine)

A simple strategy for the rapid preparation of multifunctional polydopamine (pDA) coatings is demonstrated. Microwave irradiation of the coating solution enables the formation of a ≈18 nm thick, genuine pDA coating in 15 min, which is ≈18 times faster than conventional coating. The acceleration effect results from the radical generation and temperature increase, which facilitate thermally accelerated radical polymerization of dopamine.

Development of collagen/polydopamine complexed matrix as mechanically enhanced and highly biocompatible semi-natural tissue engineering scaffold

To improve the mechanical properties and biocompatibility of collagen I matrix, a novel and facile strategy was developed to modify porcine acellular dermal matrix (PADM) via dopamine self-polymerization followed by collagen immobilization to enhance the biological, mechanical and physicochemical properties of PADM. Mechanism study indicated that the polymerization of dopamine onto PADM surface could be regulated by controlling the amount of hydrogen bonds forming between phenol hydroxyl (COH) and nitrogen atom (NCO) within collagen fibers of PADM. The investigations of surface interactions between PDA and PADM illustrated that PDA-PADM system yielded better mechanical properties, thermal stability, surface hydrophilicity and the structural integrity of PADM was maintained after dopamine coating. Furthermore, collagen (COL) was immobilized onto the fresh PDA-PADM to fabricate the collagen-PDA-PADM (COL-PDA-PADM) complexed scaffold. The MTT assay and CLSM observation showed that COL-PDA-PADM had better biocompatibility and higher cellular attachment than pure PADM and COL-PADM without dopamine coating, thus demonstrating the efficacy of PDA as the intermediate layer. Meanwhile, the expression of basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF) of COL-PDA-PADM were investigated by an in vivo study. The results revealed that COL-PDA-PADM could effectively promote bFGF and VEGF expression, possibly leading to enhancing the dura repairing process. Overall, this work contributed a new insight into the development of a semi-natural tissue engineering scaffold with high biocompatibility and good mechanical properties.

STATEMENT OF SIGNIFICANCE

Obtaining scaffolds with high biocompatibility and good mechanical properties is still one of the most challenging issues in tissue engineering. To have excellent in vitro and in vivo performance, scaffolds are desired to have similar mechanical and biological properties as the natural extracellular matrix, such as collagen based matrix. Utilizing the surface self-crosslinking and coating strategy, we successfully obtained a novel semi-natural platform with excellent biological and mechanical properties from porcine acellular dermal matrix (PADM), polydopamine and collagen. The results confirmed that this scaffold platform has very excellent cellular performance and very little toxicity/side effects in vivo. Therefore, this semi-natural scaffold may be an appropriate platform for tissue engineering and this strategy would further help to develop more robust scaffolds.

Revealing the formation mechanism of insoluble polydopamine by using a simplified model system

On the basis of a study of a simplified model system and Set Theory, a novel pathway on the formation of polydopamine is proposed.