Hydrogen-bonded organic frameworks as stationary phase for open-tubular capillary electrochromatography

BACKGROUND

Capillary electrochromatography (CEC) stationary phases have always been the focus of attention. The selection of excellent stationary phases are the key to realize separate of different compounds. Hydrogen-bonded organic frameworks (HOFs) are porous materials connected by hydrogen bonds between molecules, which have the advantages of renewable, high specific surface area and mild synthesis conditions. At present, HOFs are used in gas adsorption and storage, catalysis and drug delivery. Because of its unique advantages, HOFs have a bright future as CEC stationary phases.

RESULTS

Using melamine (MA) and 1,3,6,8-tetra (4-carboxylphenyl)pyrene (H4TBAPy) as reaction monomers, a HOFs named MA/PFC-1 was synthesized by solvent evaporation at room temperature. The inner wall of the capillary column was coated with MA/PFC-1 by chemical bonding. Sulfonamides were used as the target analytes. The effects of pH, phosphate buffer solution concentration, organic additive content and applied voltage on sulfonamides separation were investigated. The MA/PFC-1-coated capillary column had good resolution (>1.5) and reproducibility. The intra-day, inter-day, column-to-column, and inter-batch precision of the retention times were 0.03%-0.09%, 0.04%-0.09%, 0.03%-0.14% and 0.06%-0.09%, respectively. The intra-day, inter-day, column-to-column, and inter-batch precision of the peak areas were 0.11%-0.25%, 0.13%-0.20%, 0.12%-0.15% and 0.08%-0.15%, respectively. The MA/PFC-1-coated capillary column was run 150 consecutive times, and the results showed no noticeable change, which proved that this method had good stability.

SIGNIFICANCE

This work applied HOFs to CEC. The results show the that MA/PFC-1-coated capillary column has good separation performance. The MA/PFC-1-coated capillary column has been successfully applied to the determination of sulfamethoxazole in tablets, which has practical application value. To open up the application of HOFs in CEC and provide a new idea for developing new CEC stationary phases.

Molecular mechanisms underlying nanowire formation in pristine phthalocyanine

Understanding the molecular processes of nanowire self-assembly is crucial for designing and controlling nanoscale structures that could lead to breakthroughs in functional materials. In this work, we focus on pristine phthalocyanines as a representative example of mesogenic supramolecular assemblies and have analyzed the formation of nanowires using classical molecular dynamics simulations. In the simulations, the molecules spontaneously form multi-columnar structures resembling supramolecular polymers that subsequently grow into more ordered aggregates. These self-assemblies are concentration dependent, leading to the formation of multi-columnar, dynamic aggregates at higher concentrations and nanowires at lower concentrations. The multi-columnar assemblies on a whole are more disordered than the nanowires, but have locally ordered domains of parallel facing molecules that can fluctuate while maintaining their overall shape. The nanowire formation at lower concentrations involves the initial interaction and clustering of randomly oriented phthalocyanine molecules, followed by the merging of small clusters into elongated segments and the eventual formation of a stable nanowire. We observe three main conformers in these self-assemblies, the parallel, T-shaped and edge-to-edge stacking of the phthalocyanine dimers. We calculate the underlying free energy landscape and show that the parallel conformers form the most stable configuration which is followed by the T-shaped and edge-to-edge dimer configurations. The findings provide insights into the mechanisms and pathways of nanowire formation and a step towards the understanding of self-assembly processes in supramolecular mesogens.

Melamine-participant hydrogen-bonded organic frameworks with strong hydrogen bonds and hierarchical micropores driving extraction of nitroaromatic compounds

Enrichment and detection of trace pollutants in the real matrix are essential for evaluating water quality. In this study, benefiting from the good affinities of 1,3,6,8-tetra(4-carboxylphenyl)pyrene) (H4TBAPy) with itself and melamine (MA) respectively, the composite hydrogen-bonded organic frameworks (HOFs, MA/PFC-1), PFC-1 self-assembled by 1,3,6,8-tetra(4-carboxylphenyl)pyrene), were successfully constructed by the mild strategy of solvent evaporation at room temperature. Through a series of characterizations, such as Fourier transform infrared spectra, X-ray diffraction, thermal gravimetric analyses, and N2 adsorption-desorption, etc., the MA/PFC-1 was confirmed to be a stable and excellent material. In addition, it possessed high surface area, hierarchical micropores, strong hydrogen bonds, and rich function groups containing N and O heteroatoms, since the newly introduced MA could be another hydrogen bonding motif, as well as increased the polarity of reaction solvent. These advantages make MA/PFC-1 be an ideal coating material for solid phase microextraction (SPME). Satisfactory enrichment factors for nitroaromatic compounds (NACs) were got by the MA/PFC-1 fiber under the optimized conditions obtained by the control variables (extraction time of 60 min, extraction temperature of 80 °C, desorption time of 6 min, desorption temperature of 260 °C, pH value of 7, and stirring speed of 250 rpm). MA/PFC-1 was further used to develop an analytical method for NACs based on head-space SPME coupled with gas chromatography‒mass spectrometry (GC‒MS). The developed method with low limits of detection (4.30-20.83 ng L-1) and good reproducibility (relative standard deviations <8.6%). The excellent performance allowed the successful application of the developed method in the determinations of trace NACs in real water samples with recoveries of 80.1%-119%. This study proposed a mild approach to synthesize composite HOFs via doping MA and developed an environmentally friendly method for the precise determinations of NACs in the environment.

Stoichiometric Ratio Controlled Dimension Transition and Supramolecular Chirality Enhancement in a Two-Component Assembly System

To control the dimension of the supramolecular system was of great significance. We construct a two component self-assembly system, in which the gelator LHC18 and achiral azobenzene carboxylic acid could co-assembly and form gels. By modulating the stoichiometric ratio of the two components, not only the morphology could be transformed from 1D nanaotube to 0D nanospheres but also the supramolecualr chirality could be tuned. This work could provide some insights to the control of dimension and the supramolecular chirality in the two-component systems by simply modulating the stoichiometric ratio.

Effect of Conductivity on In Situ Deactivation of Catechol-Boronate Complexation-Based Reversible Smart Adhesive

To reduce the need for elevated electrical potential to deactivate catechol-based smart adhesive and preserve its reversibility, conductive 1-pyrenemethyl methacrylate (PyMA) was incorporated into a catechol and phenylboronic acid-containing adhesive coating immobilized on aluminum (Al) discs. Electrochemical impedance spectroscopy (EIS) indicated that incorporation of 26 mol % of PyMA reduced ionic resistance (R_s) and charge-transfer resistance (R_c) of the coating from over 22 Ω/mm² to 5.9 and 1.2 Ω/mm², respectively. A custom-built Johnson-Kendall-Roberts (JKR) contact mechanics test setup was used to evaluate the adhesive property of the coating with in situ applied electricity using a titanium (Ti) sphere both as a test substrate as well as the cathode for application of electricity and the Al disc as the anode. The adhesive coating demonstrated over 95% reduction in the adhesive property when electricity (1-2 V) was applied while the adhesive was in direct contact with the Ti surface. The addition of PyMA enables the deactivation of the adhesive using a voltage as low as 1 V. Both cyclic voltammetry (CV) and attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectra confirmed the formation of catechol-boronate complexation through electrochemical stimulation. Breaking the complex with an acidic buffer (pH 3) recovered the catechol for strong wet adhesion and the coating could be repeatedly deactivated and reactivated using low electrical potential for up to five cycles. Incorporation of both conductive PyMA and boronic acid as the temporary protecting group was required to achieve rapidly switchable adhesive that could be deactivated with low applied voltage.

Self-Assembling Hydrogel Structures for Neural Tissue Repair

Hydrogel materials have been employed as biological scaffolds for tissue regeneration across a wide range of applications. Their versatility and biomimetic properties make them an optimal choice for treating the complex and delicate milieu of neural tissue damage. Aside from finely tailored hydrogel properties, which aim to mimic healthy physiological tissue, a minimally invasive delivery method is essential to prevent off-target and surgery-related complications. The specific class of injectable hydrogels termed self-assembling peptides (SAPs), provide an ideal combination of in situ polymerization combined with versatility for biofunctionlization, tunable physicochemical properties, and high cytocompatibility. This review identifies design criteria for neural scaffolds based upon key cellular interactions with the neural extracellular matrix (ECM), with emphasis on aspects that are reproducible in a biomaterial environment. Examples of the most recent SAPs and modification methods are presented, with a focus on biological, mechanical, and topographical cues. Furthermore, SAP electrical properties and methods to provide appropriate electrical and electrochemical cues are widely discussed, in light of the endogenous electrical activity of neural tissue as well as the clinical effectiveness of stimulation treatments. Recent applications of SAP materials in neural repair and electrical stimulation therapies are highlighted, identifying research gaps in the field of hydrogels for neural regeneration.

Self-assembly of trigonal building blocks into nanostructures: molecular design and biomedical applications

Trigonal molecules have a special triskelion structure similar to clathrin protein, providing great inspiration for constructing artificial nanoassemblies. To date, various synthetic trigonal conjugates have been designed for supramolecular self-assembly, which have demonstrated versatile and controllable self-assembly ability in materials science. Here we will review the design of trigonal (sometimes called three-legged, tripodal, C3-symmetric, or triskelion) building blocks that can self-assemble into various nanostructures and discuss the biomedical applications of the self-assembled nanomaterials.

The aromaticity of the phenyl ring imparts thermal stability to a supramolecular hydrogel obtained from low molecular mass compound

Using Fmoc-phenylalanine and Fmoc-cyclohexylalanine, we show that the aromaticity of the phenyl ring imparts significant thermal stability to a supramolecular hydrogel system and its significance depends on the method of inducing hydrogelation.

Programmable Multicomponent Self-Assembly Based on Aromatic Amino Acids

Construction of integrated self-assembly with ordered structures from two or more organic building blocks is currently a challenge, since it suffers from intrinsic systematic complexity and diverse competitive pathways. Here, it is reported that aromatic amino acid building units can be incorporated into two- or three-component coassembly driven primarily by hydrogen bonding interactions without the assistance of metal-ligand and macrocycle-based host-guest interactions. The key strategy is to employ a C₃ -symmetric molecule with alternative hydrogen bonding donor/acceptor sites that are able to bind either carboxylic acid or pyridine appended building units. Aromatic amino acids, C₃ -symmetric compound, and bipyridine unit constitute a unique ternary mutual binding system, where three coassembly pathways including two pairwise formations and one ternary combination are unveiled, giving rise to two- and three-component self-assemblies with ordered structures, respectively. The pathway complexity lies in the structural parameter of aromatic amino acids, which can be programmable by controlling substituents at the α-position of amino acids.

Self-assembly of supramolecular nanotubes/microtubes from 3,5-dimethyl-4-iodopyrazole for plasmonic nanoparticle organization

Hierarchical super-architectures from small molecule self-assembly have interesting properties and play an indispensable role in many fields. In most cases, a self-assembly process refers to multiple intermolecular interactions among intricately designed building blocks. Here, a supramolecular assembly with a tubular morphology with dimensions ranging from nanometers to micrometers was prepared through self-assembly of 3,5-dimethyl-4-iodopyrazole (DMIP), a molecule with an unprecedented simple structure. As predicted by density functional theory (DFT) calculations, the hydrogen bond and halogen bond interaction energy between DMIP molecules can be up to 32.81 kJ mol-1, which effectively drives DMIP molecules to assemble into fibrils, sheets, and finally, tubular architectures. Intriguingly, the formed tubular structure can be easily removed by heating at 100 °C, enabling the material to function as a disposable template to guide linear organization of nanostructures. As a proof of concept, ordered Au or Ag nanochains with diameters ranging from 18 to 120 nm were facilely prepared in high yield.

A self-assembled photoresponsive gel consisting of chiral nanofibers

A novel compound based on a glutamic acid skeleton, containing azobenzene as a photoresponsive group and ureidopyrimidinone (UPy) as a connection site, was designed and synthesized. The monomer is capable of forming an organogel in nonpolar organic solvents and different types of nanostructures in other solvents. The state of the gel and the chirality of the nanostructures could both be adjusted by subsequent light irradiation at different wavelengths. The helical nanofiber-like morphology was verified in the internal structure of the gel. The performance of this gel was investigated by a series of methods, such as UV–vis absorption spectroscopy, circular dichroism, scanning electron microscopy and rheological techniques. This work provides a new method for facile synthesis of chiro-optical gels.

Understanding of Structure and Thermodynamics of Melamine Association in Aqueous Solution from a Unified Theoretical and Experimental Approach

The aggregation propensity of melamine molecules in aqueous solutions in a range of melamine concentrations is investigated by means of a combination of theoretical and experimental approaches. It is observed that the hydrogen bonding interactions of sp³ nitrogen atoms of one melamine with sp² nitrogen atoms of another melamine play a major role in the melamine association. This finding is complemented by the observed favorable electrostatic energies between melamine molecules. The estimation of the orientational probability of melamine aromatic ring rules out any role of π-π interaction in melamine association. Further, the quantum chemical calculations suggest that a melamine molecule prefers to bind with another like molecule with a dihedral angle ranging from 36° to 46°. We have also determined the dimer existence autocorrelation functions to investigate the melamine-dimer stability with time in aqueous solution. Our results are well validated by the experimental findings (Chapman, R. P.; Averell, P. R.; Harris, R. R. Solubility of Melamine in Water. Ind. Eng. Chem. 1943, 35, 137-138. Ahromi, A. J.; Moosheimer, U. Oxygen Barrier Coatings Based on Supramolecular Assembly of Melamine. Macromolecules 2000, 33, 7582-7587. Yang, C.; Liu. Y. Studying on the Steady-State and Time-Resolved Fluorescence Characteristics of Melamine. Spectrochim. Acta A 2010, 75, 1329-1332. Mircescu, N. E.; Oltean, M.; Chis, V.; Leopold, N. FTIR, FT-Raman, SERS and DFT study on Melamine. Vib. Spectrosc. 2012, 62, 165-171. Makowski. S. J.; Lacher. M.; Schnick. W. Supramolecular Hydrogenbonded Structures between Melamine and N-Heterocycles. J. Mol. Struct. 2012, 1013, 19-25. Li, Z.; Chen, G.; Xu, Y.; Wang, X.; Wang, Z. Study of the Structural and Spectral Characteristics of C₃N₃(NH₂)₃(n = 1-4) Clusters. J. Phys. Chem. A 2013, 117, 12511-12518. Li, P.; Arman, D. H.; Wang, H.; Weng, L.; Alfooty, K.; Angawi, R. F.; Chen. B. Solvent Dependent Structures of Melamine: Porous or Non-porous. Cryst. Growth Des. 2015, 15, 1871-1875. Chen, J.; Lei, X.; Peng, B. Study on the Fluorescence Spectra of Melamine in Pure Milk. J. Opt. 2017, 46, 183-186.). Moreover, the thermodynamics of melamine association reveals that the association process is essentially driven by enthalpy, and this enthalpy-driven phenomenon is also confirmed by the experimental isothermal titration calorimetry measurements.

Dynamic self-assembly of DNA minor groove-binding ligand DB921 into nanotubes triggered by an alkali halide

We describe a novel self-assembling supramolecular nanotube system formed by a heterocyclic cationic molecule which was originally designed for its potential as an antiparasitic and DNA sequence recognition agent. Our structural characterisation work indicates that the nanotubes form via a hierarchical assembly mechanism that can be triggered and tuned by well-defined concentrations of simple alkali halide salts in water. The nanotubes assembled in NaCl have inner and outer diameters of ca. 22 nm and 26 nm respectively, with lengths that reach into several microns. Our results suggest the tubes consist of DB921 molecules stacked along the direction of the nanotube long axis. The tubes are stabilised by face-to-face π-π stacking and ionic interactions between the charged amidinium groups of the ligand and the negative halide ions. The assembly process of the nanotubes was followed using small-angle X-ray and neutron scattering, transmission electron microscopy and ultraviolet/visible spectroscopy. Our data demonstrate that assembly occurs through the formation of intermediate ribbon-like structures that in turn form helices that tighten and compact to form the final stable filament. This assembly process was tested using different alkali-metal salts, showing a strong preference for chloride or bromide anions and with little dependency on the type of cation. Our data further demonstrates the existence of a critical anion concentration above which the rate of self-assembly is greatly enhanced.

Self-assembling bolaamphiphile-like collagen mimetic peptides

Bolaamphiphile-like collagen mimetic peptides with charged aspartic acids at both terminals may provide a facile peptide-based approach to construct well-defined nanostructures.

Click Synthesis of Shape-Persistent Azodendrimers and their Orthogonal Self-Assembly to Nanofibres

The copper(i)-catalyzed azide–alkyne cycloaddition (CuAAC) reaction has been efficiently utilized to synthesize a series of dendrons with amino functionalities. The aminodendrons successfully underwent azodimerization to furnish a series of pyridyl- and phenyl-based azodendrimers with peripheral alkyl or ether side chain substituents. The molecular structures of the azodendrimers were fully assigned using different spectroscopic techniques, such as 1H NMR and 13C NMR, and the molecular weights were determined using MALDI-TOF mass spectrometry. The molecular self-assembly of the azodendrimers was investigated by scanning electron microscopy and transmission electron microscopy, which revealed the formation of highly ordered and uniform self-assembled nanofibres.

Binary Supramolecular Gel of Achiral Azobenzene with a Chaperone Gelator: Chirality Transfer, Tuned Morphology, and Chiroptical Property

Binary supramolecular gels based on achiral azobenzene derivatives and a chiral chaperone gelator, long-alkyl-chain-substituted L-Histidine (abbreviated as LHC18) that could assist many nongelling acids in forming gels, were investigated in order to fabricate the chiroptical gel materials in a simple way. It was found that although the carboxylic acid-terminated achiral azobenzene derivatives could not form gels in any solvents, when mixed with LHC18 they formed the co-gels and self-assembled into various morphologies ranging from nanotubes and loose nanotubes to nanosheets, depending on the substituent groups on the azobenzene moiety. The ether linkage and the number of carboxylic acid groups attached to the azobenzene moiety played important roles. Upon gel formation, the localized molecular chirality in LHC18 could be transferred to the azobenzene moiety. Combined with the trans-cis isomerization of the azobenzene, optically and chiroptically reversible gels were generated. It was found that the gel based on azobenzene with two carboxylic acid groups and ether linkages showed clear optical reversibility but less chiroptical reversibility, whereas the gel based on azobenzene with one carboxylic acid and an ether linkage showed both optical and chiroptical reversibility. Thus, new insights into the relationship among the molecular structures of the azobenzene, self-assembled nanostructures in the gel and the optical and chiroptical reversibility were disclosed.

Hierarchical Self-Assembly of Histidine-Functionalized Peptide Amphiphiles into Supramolecular Chiral Nanostructures

Controlling the hierarchical organization of self-assembling peptide amphiphiles into supramolecular nanostructures opens up the possibility of developing biocompatible functional supramolecular materials for various applications. In this study, we show that the hierarchical self-assembly of histidine- (His-) functionalized PAs containing d- or l-amino acids can be controlled by both solution pH and molecular chirality of the building blocks. An increase in solution pH resulted in the structural transition of the His-functionalized chiral PA assemblies from nanosheets to completely closed nanotubes through an enhanced hydrogen-bonding capacity and π-π stacking of imidazole ring. The effects of the stereochemistry and amino acid sequence of the PA backbone on the supramolecular organization were also analyzed by CD, TEM, SAXS, and molecular dynamics simulations. In addition, an investigation of chiral mixtures revealed the differences between the hydrogen-bonding capacities and noncovalent interactions of PAs with d- and l-amino acids.

Scaleable two-component gelator from phthalic acid derivatives and primary alkyl amines: acid-base interaction in the cooperative assembly

A series of phthalic acid derivatives (P) with a carbon-chain tail was designed and synthesized as single-component gelators. A combination of the single-component gelator P and a non-gelling additive n-alkylamine A through acid-base interaction brought about a series of novel phase-selective two-component gelators PA. The gelation capabilities of P and PA, and the structural, morphological, thermo-dynamic and rheological properties of the corresponding gels were investigated. A molecular dynamics simulation showed that the H-bonding network in PA formed between the NH of A and the carbonyl oxygen of P altered the assembly process of gelator P. Crude PA could be synthesized through a one-step process without any purification and could selectively gel the oil phase without a typical heating-cooling process. Moreover, such a crude PA and its gelation process could be amplified to the kilogram scale with high efficiency, which offers a practical economically viable solution to marine oil-spill recovery.

Understanding Pathway Complexity of Organic Micro/Nanofiber Growth in Hydrogen-Bonded Coassembly of Aromatic Amino Acids

Rational engineering of one-dimensional (1D) self-assembled aggregates to produce desired materials for versatile functions remains a challenge. In this work, we report the noncovalent modulation of 1D aggregates at the micro/nanoscale using a coassembly protocol. Aromatic amino acids were employed as the model building blocks, and melamine (Mm) behaves as a modulator to form coassembly arrays with aromatic amino acids selectively. The selective self-assembly behavior between aromatic amino acids and Mm allows distinguishing and detecting Mm and aromatic amino acids from their analogues in macroscopic and microscopic scales. Dimensions and sizes of fibrous aggregates prepared from different amino acids show two opposite pathways from pristine assemblies to coassemblies induced by the addition of Mm. This pathway complexity could be controlled by the molecular conformation determined by α-positioned substituents. The developed hypothesis presents an excellent expansibility to other substrates, which may guide us to rationally design and screen 1D materials with different dimensions and sizes including the production of high-quality self-standing hydrogels.

Self-Assembly of an Amphiphilic OEG-Linked Glutamide Lipid

Amphiphilic peptides with or without oligoethylene glycol (OEG) chains based on 3,4-bis(benzyloxy)benzoic-linked glutamide were designed and their self-assembly was investigated. It was found that the amphiphilic peptide 3 with OEG chains could not only form stable gels in a wide range of solvents, but also showed better solubility in solvents than those without OEG chains. Fibrillar and nanotube structures were found in the gels formed and the width of the fibres could be tuned with added water content. The UV-vis and XRD results suggested that the driving forces for the peptide self-assembly were mainly intermolecular π–π and hydrogen-bonding interactions. These results provide a deeper understanding of the self-assembly mechanism and size control of nanofibrils formed by an OEG-based amphiphilic peptide.

Supramolecular helical nanofibers formed by an achiral monopyrrolotetrathiafulvalene derivative: water-triggered gelation and chiral evolution

An achiral MPTTF-based gelator could form left- and right-handed supramolecular assemblies in pure DMF, whereas it turned into an opaque gel with right-handed nanofibers after adding small amounts of water.

Supramolecular nanotubes based on halogen bonding interactions: cooperativity and interaction with small guests

In this manuscript the formation of a series of self-assembled supramolecular nanotubes (SNTs) governed by noncovalent halogen bonding interactions is studied.

Heterotypic Supramolecular Hydrogels

Supramolecular hydrogels, formed via intermolecular interactions in water, are emerging as a new type of versatile soft materials to be applied in many areas, such as biomedical applications, catalysis, food additives, and cosmetics. While most of the supramolecular hydrogels are homotypic (i.e., one type of building blocks), heterotypic supramolecular hydrogels are less explored, but may offer unique advantages. This review discribes supramolecular hydrogels that consist of more than one type building blocks (i.e., heterotypic) to illustrate the promises and challenges of heterotypic supramolecular hydrogels as soft biomaterials. First, we discuss the driving force for producing heterotypic supramolecular hydrogels. Second, we introduce the general methods for triggering heterotypic supramolecular hydrogels. Third, we summarize the examples of heterotypic supramolecular hydrogels made of hydrogelators with or without containing amino acid residues. Fourth, we describe the applications of heterotypic supramolecular hydrogels up-to-date. Finally, we give the outlook and propose a few future directions that likely worth to be explored.

Control of the Handedness of Self-assemblies of Dipeptides by the Chirality of Phenylalanine and Steric Hindrance of Phenylglycine

Eight dipeptides, composed of phenylalanine and phenylglycine, that are able to self-assemble into twisted nanoribbons in deionized water are synthesized. The handedness of the nanoribbons is controlled by the chirality of the phenylalanine and the steric hindrance owing to the phenyl group of the phenylglycine. When the phenylalanine is at the C-terminal, π-π stacking by the phenyl groups, hydrogen bonding by the NH group of the phenylalanine, and hydrophobic associations of the alkyl chains control the stacking of the molecules. When phenylglycine is at the C-terminal, the chiral π-π stacking by the phenyl groups of the phenylalanines is suppressed. The hydrogen bonds formed by the NH groups of the phenylalanines had a greater contribution on forming organic self-assemblies than those formed by the NH groups of the phenylglycines.

Chiral Nanoarchitectonics: Towards the Design, Self-Assembly, and Function of Nanoscale Chiral Twists and Helices

Helical structures such as double helical DNA and the α-helical proteins found in biological systems are among the most beautiful natural structures. Chiral nanoarchitectonics, which is used here to describe the hierarchical formation and fabrication of chiral nanoarchitectures that can be observed by atomic force microscopy (AFM), scanning tunneling microscopy (STM), scanning electron microscopy (SEM), or transmission electron microscopy (TEM), is one of the most effective ways to mimic those natural chiral nanostructures. This article focuses on the formation, structure, and function of the most common chiral nanoarchitectures: nanoscale chiral twists and helices. The types of molecules that can be designed and how they can form hierarchical chiral nanoarchitectures are explored. In addition, new and unique functions such as amplified chiral sensing, chiral separation, biological effects, and circularly polarized luminescence associated with the chiral nanoarchitectures are discussed.

Micro- and nano-tubules built from loosely and tightly rolled up thin sheets

Tubular structures built from amphiphilic molecules are of interest for nano-sensing, drug delivery, and structuring of oils. In this study, we characterized the tubules built in aqueous suspensions of a cholesteryl nucleoside conjugate, cholesterylaminouridine (CholAU) and phosphatidylcholines (PCs). In mixtures with unsaturated PCs having chain lengths comparable to the length of CholAU, two different types of tubular structures were observed; nano- and micro-tubules had average diameters in the ranges 50-300 nm and 2-3 μm, respectively. Using cryo scanning electron microscopy (cryo-SEM) we found that nano- and micro-tubules differed in their morphology: the nano-tubules were densely packed, whereas micro-tubules consisted of loosely rolled undulated lamellas. Atomic force microscopy (AFM) revealed that the nano-tubules were built from 4 to 5 nm thick CholAU-rich bilayers, which were in the crystalline state. Solid-state (2)H NMR spectroscopy also confirmed that about 25% of the total CholAU, being about the fraction of CholAU composing the tubules, formed the rigid crystalline phase. We found that CholAU/PC tubules can be functionalized by molecules inserted into lipid bilayers and fluorescently labeled PCs and lipophilic nucleic acids inserted spontaneously into the outer layer of the tubules. The tubular structures could be loaded and cross-linked, e.g. by DNA hybrids, and, therefore, are of interest for further development, e.g. as a depot scaffold for tissue regeneration.

Tuning of gel morphology with supramolecular chirality amplification using a solvent strategy based on an Fmoc-amino acid building block

The self-assembly of an aromatic amino acid affords diverse aggregates from flat nanofibers to twist nanofibers with tunable supramolecular chirality.

Selective shrinkage and separation of isomeric naphthoic acids via supramolecular gelation

The isomeric non-gelator molecules 1- or 2-naphthoic acid (NA1, or NA2) were found to form two-component supramolecular gels with an amphiphilic gelator LHC18, and the NA2/LHC18 gel underwent shrinking at room temperature.

Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials

In this review we intend to provide a relatively comprehensive summary of the work of supramolecular hydrogelators after 2004 and to put emphasis particularly on the applications of supramolecular hydrogels/hydrogelators as molecular biomaterials. After a brief introduction of methods for generating supramolecular hydrogels, we discuss supramolecular hydrogelators on the basis of their categories, such as small organic molecules, coordination complexes, peptides, nucleobases, and saccharides. Following molecular design, we focus on various potential applications of supramolecular hydrogels as molecular biomaterials, classified by their applications in cell cultures, tissue engineering, cell behavior, imaging, and unique applications of hydrogelators. Particularly, we discuss the applications of supramolecular hydrogelators after they form supramolecular assemblies but prior to reaching the critical gelation concentration because this subject is less explored but may hold equally great promise for helping address fundamental questions about the mechanisms or the consequences of the self-assembly of molecules, including low molecular weight ones. Finally, we provide a perspective on supramolecular hydrogelators. We hope that this review will serve as an updated introduction and reference for researchers who are interested in exploring supramolecular hydrogelators as molecular biomaterials for addressing the societal needs at various frontiers.

Polymorphic transformation towards formation of nanotubes by self-assembly of an achiral molecule

In this paper, nanotubes with a uniform diameter were prepared by self-assembly of an achiral azobenzene-containing fatty acid. The polymorphic transformation of the assemblies during the cooling process was systematically studied. By controlling the incubation temperature, different morphologies, such as membranes, stripes, helical ribbons and tubes, were all obtained in our experiment. These elements were all predicted by Selinger et al. in the theoretical model of the formation of nanotubes. To the best of our knowledge, this is the first experimental example to fully support their theory.

Installing Logic Gates to Multiresponsive Supramolecular Hydrogel Co-assembled from Phenylalanine Amphiphile and Bis(pyridinyl) Derivative

Recently, logic gates based on multiresponsive hydrogel systems are attractive because of their potential biological applications. A quite simple supramolecular hydrogel co-assembled from phenylalanine-based amphiphile (LPF2) and bis(pyridinyl) derivative (AP) is constructed. The co-assembled hydrogel exhibited a macroscopic gel-sol transition in response to four distinct input stimuli: temperature, acid, base, and light. A set of techniques including microscopic, spectroscopic, and rheological measurements demonstrate this performance and confirm that the hydrogel is formed through intermolecular hydrogen bonds between amide/pyridine moieties and carbonyl groups. On the basis of its mutiple-stimulus responsiveness, installing gel-based supramolecular logic gates (OR and XOR) is achieved. It may promote the possibility to develop smart soft materials, such as gels, that can be used as tools releasing a drug quantitatively by rational design and fine control of the external stimuli.

Controlled self-assembly of a pyrene-based bolaamphiphile by acetate ions: from nanodisks to nanofibers by fluorescence enhancement

In this paper, a pyrene moiety is incorporated into a bolaamphiphile to form a novel molecule denoted PRB. Above the critical micelle concentration, PRB forms nanodisks in the aqueous solution. The addition of acetate ions induces a morphological change in self-assembled aggregates, which convert into nanofibers with a diameter of several nanometers. More interestingly, along with the morphological change, the fluorescence of the assemblies was enhanced concomitantly, which can be attributed to the binding effect of acetate ions on pyridinium head groups of PRB.

Electrostatic and aromatic interaction-directed supramolecular self-assembly of a designed Fmoc-tripeptide into helical nanoribbons

Supramolecular self-assembly offers an efficient pathway for creating macroscopically chiral structures in biology and materials science. Here, a new peptide consisting of an N-(9-fluorenylmethoxycarbonyl) headgroup connected to an aromatic phenylalanine-tryptophan dipeptide and terminated with zwitterionic lysine (Fmoc-FWK) and its cationic form (Fmoc-FWK-NH2) were designed for self-assembly into chiral structures. It was found that the Fmoc-FWK peptide self-assembled into left-handed helical nanoribbons at pH 11.2-11.8, whereas it formed nanofibers at pH 5 and 12 and large flat ribbons composed of many nanofibers in the pH range of 6-11. However, only nanofibers were observed in the cases of Fmoc-FWK-NH2 at different values. A series of structural characterizations based on CD, FTIR, UV-vis and fluorescence spectroscopy reveal that the electrostatic and aromatic interactions and the associated hydrogen bonding direct the self-assembly into various structures. The enhanced π-π stacking and hydrogen bonding were found in the helical nanoribbons. This difference in intermolecular interactions should be derived from the ionization of carboxyl and amino groups from lysine residues at different pH values. Furthermore, we performed molecular dynamics simulations to gain insight into the assembly mechanisms. The results imply that a relatively rigid molecular conformation and the strong intramolecular aromatic interaction between Trp and Fmoc groups favor chiral self-assembly. This study is the first attempt to design a Fmoc-tripeptide for the fabrication of helical structures with macroscopic chirality, which provides a successful example and allows us to create new peptide-based chiral assembly systems.

Supramolecular structures ranging from nano- to macro-scale with fluorescent and organic semiconducting properties

Supramolecular structures ranging from nano- to macro-scale are prepared by an ionic self-assembly (ISA) strategy with commercially available, low-cost dyes and surfactants, viz. Rhodamine 6G (R6G) and sodium bis(2-ethylhexylhexyl) sulfosuccinate (NaAOT).

Self-assembly pathway of peptide nanotubes formed by a glutamatic acid-based bolaamphiphile

The self-assembly of peptide nanotubes formed by an l-glutamic acid-based bolaamphiphile is shown to proceed via a remarkable mechanism where the peptide conformation changes from β-sheet to unordered.