Aromatic Diboronic Acids as Effective KPC/AmpC Inhibitors

Over 30 compounds, including para-, meta-, and ortho-phenylenediboronic acids, ortho-substituted phenylboronic acids, benzenetriboronic acids, di- and triboronated thiophenes, and pyridine derivatives were investigated as potential β-lactamase inhibitors. The highest activity against KPC-type carbapenemases was found for ortho-phenylenediboronic acid 3a, which at the concentration of 8/4 mg/L reduced carbapenems' MICs up to 16/8-fold, respectively. Checkerboard assays revealed strong synergy between carbapenems and 3a with the fractional inhibitory concentrations indices of 0.1-0.32. The nitrocefin hydrolysis test and the whole cell assay with E. coli DH5α transformant carrying blaKPC-3 proved KPC enzyme being its molecular target. para-Phenylenediboronic acids efficiently potentiated carbapenems against KPC-producers and ceftazidime against AmpC-producers, whereas meta-phenylenediboronic acids enhanced only ceftazidime activity against the latter ones. Finally, the statistical analysis confirmed that ortho-phenylenediboronic acids act synergistically with carbapenems significantly stronger than other groups. Since the obtained phenylenediboronic compounds are not toxic to MRC-5 human fibroblasts at the tested concentrations, they can be considered promising scaffolds for the future development of novel KPC/AmpC inhibitors. The complexation of KPC-2 with the most representative isomeric phenylenediboronic acids 1a, 2a, and 3a was modeled by quantum mechanics/molecular mechanics calculations. Compound 3a reached the most effective configuration enabling covalent binding to the catalytic Ser70 residue.

Effect of chemical substitution on the construction of boroxine-based supramolecular crystalline polymers featuring B←N dative bonds

We report the mechanochemical synthesis of five single-crystalline phenylboroxine and 1,4-diazabicyclo[2.2.2]octane (DABCO) ligand-based adducts, directed by boron-nitrogen dative bonds. By tuning the electronic features of the phenylboroxines by chemical modifications...

Covalent Triazine Framework as an Efficient Photocatalyst for Regeneration of NAD(P)H and Selective Oxidation of Organic Sulfide

Covalent triazine frameworks (CTFs), belonging to the super-family of covalent organic frameworks, have attracted significant attention as a new type of photosensitizer due to the superb light harvesting ability and efficient charge transfer originating from the large surface area. However, the wide optical band gap in CTFs, which is larger than 3.0 eV, hinders the efficient light harvesting in the visible range. To overcome this limitation, we developed the new type CTFs photocatalyst based on the donor-acceptor conjugation scheme by using melamine (M) and 2,6-diaminoanthraquinone (AQ) as monomeric units. The melamine-2,6-diaminoanthraquinone based covalent triazine frameworks (M-AQ-CTFs) photocatalyst shows the excellent light harvesting capacity with high molar extinction coefficient, and the suitable optical band gap involving the internal charge transfer character. Combination of M-AQ-CTFs and artificial photosynthetic system including the organometallic rhodium complex, acting as an electron mediator, exhibited the excellent photocatalytic efficiency for the regeneration of the nicotinamide cofactors such as NAD(P)H. In addition, this photocatalyst showed the high photocatalytic efficiency for the metal-free aerobic oxidation of sulfide. This study demonstrates the high potential of CTFs photocatalyst with the donor-acceptor conjugated scheme can be actively used for the artificial photosynthesis.

Host guest chemistry and supramolecular doping in triphenylamine-based covalent frameworks on Au(111)

The post-synthetic modification of covalent organic frameworks (COFs) via host-guest chemistry is an important method to tailor their electronic properties for applications. Due to the limited structural control in the assembly of two-dimensional surface-supported COFs, supramolecular networks are traditionally used at present for host-guest experiments on surfaces, which lack structural and thermal stability, however. Here, we present a combined scanning tunneling microscopy and density functional theory study to understand the host-guest interaction in triphenylamine-based covalently-linked macrocycles and networks on Au(111). These triphenylamine-based structures feature carbonyl and hydrogen functionalized pores that create preferred adsorption sites for trimesic acid (TMA) and halogen atoms. The binding of the TMA through optimized hydrogen-bond interactions is corroborated by selective adsorption positions within the pores. Band structure calculations reveal that the strong intermolecular charge transfer through the TMA bonding reduces the band gap in the triphenylamine COFs, demonstrating the concept of supramolecular doping by host-guest interactions in surface-supported COFs. Halogen atoms selectively adsorb between two carbonyl groups at Au hollow sites. The mainly dispersive interaction of the halogens with the triphenylamine COF leads to a small downshift of the bands. Most of the halogens change their adsorption position selectively upon annealing near the desorption temperature. In conclusion, we demonstrate evidence for supramolecular doping via post-synthetic modification and to track chemical reactions in confined space.

Synthesis of Benzoxaboroles by ortho-Oxalkylation of Arylboronic Acids with Aldehydes/Ketones in the Presence of Brønsted Acids

Herein we describe a simple and efficient synthesis of benzoxaboroles from arylboronic acids and aldehydes or ketones in the presence of a Brønsted acid. This method greatly simplifies the starting materials and reduces the number of reaction steps. The reaction can also be accomplished with acetals and ketals. The reaction has a wide substrate scope and high practicability.

Surface-confined single-layer covalent organic frameworks: design, synthesis and application

This review describes the state of the art of surface-confined single-layer covalent organic frameworks, focusing on reticular design, synthesis approaches, and exploring applications in host/guest chemistry.

Controlling a Chemical Coupling Reaction on a Surface: Tools and Strategies for On-Surface Synthesis

On-surface synthesis is appearing as an extremely promising research field aimed at creating new organic materials. A large number of chemical reactions have been successfully demonstrated to take place directly on surfaces through unusual reaction mechanisms. In some cases the reaction conditions can be properly tuned to steer the formation of the reaction products. It is thus possible to control the initiation step of the reaction and its degree of advancement (the kinetics, the reaction yield); the nature of the reaction products (selectivity control, particularly in the case of competing processes); as well as the structure, position, and orientation of the covalent compounds, or the quality of the as-formed networks in terms of order and extension. The aim of our review is thus to provide an extensive description of all tools and strategies reported to date and to put them into perspective. We specifically define the different approaches available and group them into a few general categories. In the last part, we demonstrate the effective maturation of the on-surface synthesis field by reporting systems that are getting closer to application-relevant levels thanks to the use of advanced control strategies.

Solvent-free on-surface synthesis of boroxine COF monolayers

A protocol is proposed for the solvent-free on-surface synthesis of covalent organic framework monolayers by condensation of diboronic acids. Monomers are vapor-deposited and water is used for equilibrium regulation. Samples are characterized on progressively smaller length scales by light microscopy, Scanning Electron Microscopy, and Scanning Tunneling Microscopy.

On-surface synthesis of aligned functional nanoribbons monitored by scanning tunnelling microscopy and vibrational spectroscopy

In the blooming field of on-surface synthesis, molecular building blocks are designed to self-assemble and covalently couple directly on a well-defined surface, thus allowing the exploration of unusual reaction pathways and the production of specific compounds in mild conditions. Here we report on the creation of functionalized organic nanoribbons on the Ag(110) surface. C–H bond activation and homo-coupling of the precursors is achieved upon thermal activation. The anisotropic substrate acts as an efficient template fostering the alignment of the nanoribbons, up to the full monolayer regime. The length of the nanoribbons can be sequentially increased by controlling the annealing temperature, from dimers to a maximum length of about 10 nm, limited by epitaxial stress. The different structures are characterized by room-temperature scanning tunnelling microscopy. Distinct signatures of the covalent coupling are measured with high-resolution electron energy loss spectroscopy, as supported by density functional theory calculations.

On-surface synthesis, in which molecular units assemble and couple on a defined surface, can access rare reaction pathways and products. Here, the authors synthesize functionalized organic nanoribbons on the Ag(110) surface, and monitor the evolution of the covalent reactions by an unorthodox vibrational spectroscopy approach.

Hierarchical on-surface synthesis and electronic structure of carbonyl-functionalized one- and two-dimensional covalent nanoarchitectures

The fabrication of nanostructures in a bottom-up approach from specific molecular precursors offers the opportunity to create tailored materials for applications in nanoelectronics. However, the formation of defect-free two-dimensional (2D) covalent networks remains a challenge, which makes it difficult to unveil their electronic structure. Here we report on the hierarchical on-surface synthesis of nearly defect-free 2D covalent architectures with carbonyl-functionalized pores on Au(111), which is investigated by low-temperature scanning tunnelling microscopy in combination with density functional theory calculations. The carbonyl-bridged triphenylamine precursors form six-membered macrocycles and one-dimensional (1D) chains as intermediates in an Ullmann-type coupling reaction that are subsequently interlinked to 2D networks. The electronic band gap is narrowed when going from the monomer to 1D and 2D surface-confined π-conjugated organic polymers comprising the same building block. The significant drop of the electronic gap from the monomer to the polymer confirms an efficient conjugation along the triphenylamine units within the nanostructures.

Room-Temperature Synthesis of Covalent Organic Frameworks with a Boronic Ester Linkage at the Liquid/Solid Interface

With various prospected applications in the field of nanoelectronics and catalysis, on-surface synthesis of single-layer covalent organic frameworks (surface COFs) with designable structures and properties have attracted enormous interest. Herein, we report on a scanning tunneling microscopic investigation of the surface-confined synthesis of a covalently bonded boronic ester network directly at the octanoic acid/ highly oriented pyrolytic graphite(HOPG) interface under room temperature. The dynamic reaction process was investigated in detail. STM results indicate that the surface networks undergo structural evolution from a hybrid covalent/noncovalent multiwall porous network to single-wall hexagonal COF with the decrease of monomer concentration. Further experimental observation disclosed that the boronic ester-linked system is sensitive to instantaneous voltage pulses and the stimulation of the STM tip. In addition, the ¹ H NMR spectra has further confirmed that the surface and octanoic acid may play important roles in promoting the reaction between 4,4'-phenylazobenzoyl diboronic acid (ABBA) and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) building units.

Side-functionalized two-dimensional polymers synthesized via on-surface Schiff-base coupling

An imine-based 2D polymer side-functionalized with o-hydroxyl group was designed in regard to its potential ability to serve as a chelating agent and synthesized on a highly oriented pyrolytic graphite surface with a relatively low annealing temperature. When annealed to a higher temperature the o-hydroxyl group reacts further with the imine group, leading to the formation of oxazoline, which causes significant distortion to the network. The formation of oxazoline was further confirmed by ATR-FTIR.

Graphene-like single-layered covalent organic frameworks: synthesis strategies and application prospects

Two-dimensional (2D) nanomaterials, such as graphene and transition metal chalcogenides, show many interesting dimension-related materials properties. Inspired by the development of 2D inorganic nanomaterials, single-layered covalent organic frameworks (sCOFs), featuring atom-thick sheets and crystalline extended organic structures with covalently bonded building blocks, have attracted great attention in recent years. With their unique graphene-like topological structure and the merit of structural diversity, sCOFs promise to possess novel and designable properties. However, the synthesis of sCOFs with well-defined structures remains a great challenge. Herein, the recent development of the bottom-up synthesis methods of 2D sCOFs, such as thermodynamic equilibrium control methods, growth-kinetics control methods, and surface-assisted covalent polymerization methods, are reviewed. Finally, some of the critical properties and application prospects of these materials are outlined.

Covalent assembly of a two-dimensional molecular “sponge” on a Cu(111) surface: confined electronic surface states in open and closed pores

We present a new class of on-surface covalent reactions, formed between diborylene-3,4,9,10-tetraaminoperylene and trimesic acid on Cu(111), which gives rise to a porous 2D-‘sponge’.

Growth of boronic acid based two-dimensional covalent networks on a metal surface under ultrahigh vacuum

An extensive analysis of the complex mechanisms governing the on-surface polymerisation of boronic acid on a metal surface under vacuum.