Cu(I)-based delafossite compounds as photocathodes in p-type dye-sensitized solar cells

Critical Review of Cu-Based Hole Transport Materials for Perovskite Solar Cells: From Theoretical Insights to Experimental Validation

Despite the remarkable efficiency of perovskite solar cells (PSCs), long-term stability remains the primary barrier to their commercialization. The prospect of enhancing stability by substituting organic transport layers with suitable inorganic compounds, particularly Cu-based inorganic hole-transport materials (HTMs), holds promise due to their high valence band maximum (VBM) aligning with perovskite characteristics. This review assesses the advantages and disadvantages of these five types of Cu-based HTMs. Although Cu-based binary oxides and chalcogenides face narrow bandgap issues, the "chemical modulation of the valence band" (CMVB) strategy has successfully broadened the bandgap for Cu-based ternary oxides and chalcogenides. However, Cu-based ternary oxides encounter challenges with low mobility, and Cu-based ternary chalcogenides face mismatches in VBM alignment with perovskites. Cu-based binary halides, especially CuI, exhibit excellent properties such as wider bandgap, high mobility, and defect tolerance, but their stability remains a concern. These limitations of single anion compounds are insightfully discussed, offering solutions from the perspective of practical application. Future research can focus on Cu-based composite anion compounds, which merge the advantages of single anion compounds. Additionally, mixed-cation chalcogenides such as CuxM1-xS enable the customization of HTM properties by selecting and adjusting the proportions of cation M.

Delafossite CuGaO2-Based Chemiresistive Sensor for Sensitive and Selective Detection of Dimethyl Disulfide

Dimethyl disulfide (DMDS) is a common odor pollutant with an extremely low olfactory threshold. Highly sensitive and selective detection of DMDS in ambient humid air background, by metal oxide semiconductor (MOS) sensors, is highly desirable to address the increased public concern for health risk. However, it has still been a critical challenge up to now. Herein, p-type delafossite CuGaO2 has been proposed as a promising DMDS sensing material owing to its striking hydrophobicity (revealed by water contact angle measurement) and excellent partial catalytic oxidation properties (indicated by mass spectroscopy). The present CuGaO2 sensor shows a selective DMDS response, with satisfied humidity resistance performance and long-term stability at a relatively low operation temperature of 140 °C. An ultrahigh response of 100 to 10 ppm DMDS and a low limit of detection of 3.3 ppb could be achieved via a pulsed temperature modulation strategy. A smart sensing system based on a CuGaO2 sensor has been developed, which could precisely monitor DMDS vapor in ambient humid air, even with the presence of multiple interfering gases, demonstrating the practical application capability of MOS sensors for environmental odor monitoring.

Ligand-Centered Photocatalytic Hydrogen Production in an Axially Capped Rh2(II,II) Paddlewheel Complex with Red Light

A new series of Rh2(II,II) complexes with the formula cis-[Rh2(DTolF)2(bpnp)(L)]2+, where bpnp = 2,7-bis(2-pyridyl)-1,8-naphthyridine, DTolF = N,N'-di(p-tolyl) formamidinate, and L = pdz (pyridazine; 2), cinn (cinnoline; 3), and bncn (benzo[c]cinnoline; 4), were synthesized from the precursor cis-[Rh2(DTolF)2(bpnp)(CH3CN)2]2+ (1). The first reduction couple in 2-4 is localized on the bpnp ligand at approximately -0.52 V vs Ag/AgCl in CH3CN (0.1 M TBAPF6), followed by reduction of the corresponding diazine ligand. Complex 1 exhibits a Rh2(δ*)/DTolF → bpnp(π*) metal/ligand-to-ligand charge-transfer (1ML-LCT) absorption with a maximum at 767 nm (ε = 1800 M-1 cm-1). This transition is also present in the spectra of 2-4, overlaid with the Rh2(δ*)/DTolF → L(π*) 1ML-LCT bands at 516 nm in 2 (L = pdz), 640 nm in 3 (L = cinn), and 721 nm in 4 (L = bncn). Complexes 2 and 3 exhibit Rh2(δ*)/DTolF → bpnp 3ML-LCT excited states with lifetimes, τ, of 3 and 5 ns, respectively, in CH3CN, whereas the lowest energy 3ML-LCT state in 4 is Rh2(δ*)/DTolF → bncn in nature with τ = 1 ns. Irradiation of 4 with 670 nm light in DMF in the presence of 0.1 M TsOH (p-toluene sulfonic acid) and 30 mM BNAH (1-benzyl-1,4-dihydronicotinamide) results in the production of H2 with a turnover number (TON) of 16 over 24 h. The axial capping of the Rh2(II,II) bimetallic core with the bpnp ligand prevents the formation of an Rh-H hydride intermediate. These results show that the observed photocatalytic reactivity is localized on the bncn ligand, representing the first example of ligand-centered H2 production.

Pt-Anchored CuCrO2 for Low-Temperature-Operating High-Performance H2S Chemiresistors

Recent advances in heterogeneous catalysts indicate that single atoms (SAs), anchored/stabilized on metal oxide nanostructures, exhibit not only high catalyst atom efficiency but also intriguing reactivity and selectivity. Herein, isolated Pt SA-anchored CuCrO₂ (CCO) has been designed by a glycine-nitrate solution combustion synthesis (SCS) route. The density of isolated Pt SAs achieves the highest value of ∼100 μm^-2 for the 1.39 wt % Pt-anchored CCO sample, which results in the drastically boosted H₂S response characteristics, including a high response of 1250 (35 times higher than that of pure CCO) at 10 ppm H₂S and a low operating temperature of 100 °C. Except for CH₄S, the responses of a 1.39 wt % Pt-anchored CCO chemiresistor to diverse vapors with concentrations of 50-100 ppm are less than 2, exhibiting excellent selectivity. Various ex situ characterizations indicate that the spillover catalytic effect of Pt SA sites, other than the conventional sulfuration-desulfuration mechanism, plays a dominant role in the outstanding H₂S response characteristics.

Efficient and Stable Perovskite Solar Cells Based on Inorganic Hole Transport Materials

Although power conversion efficiencies of organic-inorganic lead halide perovskite solar cells (PSCs) are approaching those of single-crystal silicon solar cells, the working device stability due to internal and external factors, such as light, temperature, and moisture, is still a key issue to address. The current world-record efficiency of PSCs is based on organic hole transport materials, which are usually susceptible to degradation from heat and diffusion of dopants. A simple solution would be to replace the generally used organic hole transport layers (HTLs) with a more stable inorganic material. This review article summarizes recent contributions of inorganic hole transport materials to PSC development, focusing on aspects of device performance and long-term stability. Future research directions of inorganic HTLs in the progress of PSC research and challenges still remaining will also be discussed.

Dye-sensitized solar cells strike back

Dye-sensitized solar cells (DSCs) are celebrating their 30th birthday and they are attracting a wealth of research efforts aimed at unleashing their full potential. In recent years, DSCs and dye-sensitized photoelectrochemical cells (DSPECs) have experienced a renaissance as the best technology for several niche applications that take advantage of DSCs' unique combination of properties: at low cost, they are composed of non-toxic materials, are colorful, transparent, and very efficient in low light conditions. This review summarizes the advancements in the field over the last decade, encompassing all aspects of the DSC technology: theoretical studies, characterization techniques, materials, applications as solar cells and as drivers for the synthesis of solar fuels, and commercialization efforts from various companies.

Cause, Regulation and Utilization of Dye Aggregation in Dye-Sensitized Solar Cells

As an important member of third generation solar cell, dye-sensitized solar cells (DSSCs) have the advantages of being low cost, having an easy fabrication process, utilizing rich raw materials and a high-power conversion efficiency (PCE), prompting nearly three decades as a research hotspot. Recently, increasing the photoelectric conversion efficiency of DSSCs has proven troublesome. Sensitizers, as the most important part, are no longer limited to molecular engineering, and the regulation of dye aggregation has become a widely held concern, especially in liquid DSSCs. This review first presents the operational mechanism of liquid and solid-state dye-sensitized solar cells, including the influencing factors of various parameters on device efficiency. Secondly, the mechanism of dye aggregation was explained by molecular exciton theory, and the influence of various factors on dye aggregation was summarized. We focused on a review of several methods for regulating dye aggregation in liquid and solid-state dye-sensitized solar cells, and the advantages and disadvantages of these methods were analyzed. In addition, the important application of quantum computational chemistry in the study of dye aggregation was introduced. Finally, an outlook was proposed that utilizing the advantages of dye aggregation by combining molecular engineering with dye aggregation regulation is a research direction to improve the performance of liquid DSSCs in the future. For solid-state dye-sensitized solar cells (ssDSSCs), the effects of solid electrolytes also need to be taken into account.

Electrochemically Deposited NiO Films as a Blocking Layer in p-Type Dye-Sensitized Solar Cells with an Impressive 45% Fill Factor

The enhancement of photoelectrochemical conversion efficiency of p-type dye-sensitized solar cells (p-DSSCs) is necessary to build up effective tandem devices in which both anode and cathode are photoactive. The efficiency of a p-type device (2.5%) is roughly one order of magnitude lower than the n-type counterparts (13.1%), thus limiting the overall efficiency of the tandem cell, especially in terms of powered current density. This is mainly due to the recombination reaction that occurs especially at the photocathode (or Indium-doped Tin Oxide (ITO))/electrolyte interface. To minimize this phenomenon, a widely employed strategy is to deposit a compact film of NiO (acting as a blocking electrode) beneath the porous electrode. Here, we propose electrodeposition as a cheap, easy scalable and environmental-friendly approach to deposit nanometric films directly on ITO glass. The results are compared to a blocking layer made by means of sol-gel technique. Cells embodying a blocking layer substantially outperformed the reference device. Among them, BL_1.10V shows the best photoconversion efficiency (0.166%) and one of the highest values of fill factor (approaching 46%) ever reported. This is mainly due to an optimized surface roughness of the blocking layer assuring a good deposition of the porous layer. The effectiveness of the implementation of the blocking layer is further proved by means of Electrochemical Impedance Spectroscopy.

Inverse Opal CuCrO2 Photocathodes for H2 Production Using Organic Dyes and a Molecular Ni Catalyst

Dye-sensitized photoelectrochemical (DSPEC) cells are an emerging approach to producing solar fuels. The recent development of delafossite CuCrO2 as a p-type semiconductor has enabled H2 generation through the coassembly of catalyst and dye components. Here, we present a CuCrO2 electrode based on a high-surface-area inverse opal (IO) architecture with benchmark performance in DSPEC H2 generation. Coimmobilization of a phosphonated diketopyrrolopyrrole (DPP-P) or perylene monoimide (PMI-P) dye with a phosphonated molecular Ni catalyst (NiP) demonstrates the ability of IO-CuCrO2 to photogenerate H2. A positive photocurrent onset potential of approximately +0.8 V vs RHE was achieved with these photocathodes. The DPP-P-based photoelectrodes delivered photocurrents of -18 μA cm-2 and generated 160 ± 24 nmol of H2 cm-2, whereas the PMI-P-based photocathodes displayed higher photocurrents of -25 μA cm-2 and produced 215 ± 10 nmol of H2 cm-2 at 0.0 V vs RHE over the course of 2 h under visible light illumination (100 mW cm-2, AM 1.5G, λ > 420 nm, 25 °C). The high performance of the PMI-constructed system is attributed to the well-suited molecular structure and photophysical properties for p-type sensitization. These precious-metal-free photocathodes highlight the benefits of using bespoke IO-CuCrO2 electrodes as well as the important role of the molecular dye structure in DSPEC fuel synthesis.

Ab initio Study of Anchoring Groups for CuGaO2 Delafossite-Based p-Type Dye Sensitized Solar Cells

Here we report the first theoretical characterization of the interface between the CuGaO₂ delafossite oxide and the carboxylic (–COOH) and phosphonic acid (–PO₃H₂) anchoring groups. The promising use of delafossites as effective alternative to nickel oxide in p-type DSSC is still limited by practical difficulties in sensitizing the delafossite surface. Thus, this work provides atomistic insights on the structure and energetics of all the possible interactions between the anchoring functional groups and the CuGaO₂ surface species, including the effects of the Mg doping and of the solvent medium. Our results highlight the presence of a strong selectivity toward the monodentate binding mode on surface Ga atoms for both the carboxylic and phosphonic acid groups. Since the binding modes have a strong influence on the hole injection thermodynamics, these findings have direct implications for further development of delafossite based p-type DSSCs.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Electrochemical and Photoelectrochemical Properties of Nickel Oxide (NiO) With Nanostructured Morphology for Photoconversion Applications

The cost-effective production of chemicals in electrolytic cells and the conversion of the radiation energy into electrical energy in photoelectrochemical cells (PECs) require the use of electrodes with large surface area, which possess either electrocatalytic or photoelectrocatalytic properties. In this context nanostructured semiconductors are electrodic materials of great relevance because of the possibility of varying their photoelectrocatalytic properties in a controlled fashion via doping, dye-sensitization or modification of the conditions of deposition. Among semiconductors for electrolysers and PECs the class of the transition metal oxides (TMOs) with a particular focus on NiO interests for the chemical-physical inertness in ambient conditions and the intrinsic electroactivity in the solid state. The latter aspect implies the existence of capacitive properties in TMO and NiO electrodes which thus act as charge storage systems. After a comparative analysis of the (photo)electrochemical properties of nanostructured TMO electrodes in the configuration of thin film the use of NiO and analogs for the specific applications of water photoelectrolysis and, secondly, photoelectrochemical conversion of carbon dioxide will be discussed.

Solvothermal synthesis of CuCoO2 nanoplates using zeolitic imidazolate framework-67 (ZIF-67) as a co-derived precursor

CuCoO₂ nanoplates were prepared through the solvothermal method at 140 °C using ZIF-67 as the Co precursor for the first time.

Structure of Ni(OH)2 intermediates determines the efficiency of NiO-based photocathodes – a case study using novel mesoporous NiO nanostars

NiO nanostructures prepared from β-Ni(OH)₂ intermediates exhibit favorable electronic properties for functional photocathodes for solar energy conversion devices.

Design of an Inorganic Mesoporous Hole-Transporting Layer for Highly Efficient and Stable Inverted Perovskite Solar Cells

The unstable feature of the widely employed organic hole-transporting materials (HTMs) (e.g., spiro-MeOTAD) significantly limits the practical application of perovskite solar cells (PSCs). Therefore, it is desirable to design new structured PSCs with stable HTMs presenting excellent carrier extraction and transfer properties. This work demonstrates a new inverted PSC configuration. The new PSC has a graded band alignment and bilayered inorganic HTMs (i.e., compact NiO_x and mesoporous CuGaO₂ ). In comparison with planar-structured PSCs, the mesoporous CuGaO₂ can effectively extract holes from perovskite due to the increased contact area of the perovskite/HTM. The graded energy alignment constructed in the ultrathin compact NiO_x , mesoporous CuGaO₂ , and perovskite can facilitate carrier transfer and depress charge recombination. As a result, the champion device based on the newly designed mesoscopic PSCs yields a stabilized efficiency of ≈20%, which is considered one of the best results for inverted PSCs with inorganic HTMs. Additionally, the unencapsulated PSC device retains more than 80% of its original efficiency when subjected to thermal aging at 85 °C for 1000 h in a nitrogen atmosphere, thus demonstrating superior thermal stability of the device. This study may pave a new avenue to rational design of highly efficient and stable PSCs.

An ab initio study of Cu-based delafossites as an alternative to nickel oxide in photocathodes: effects of Mg-doping and surface electronic features

CuMO2 delafossites (M = Al, Ga, and Cr) are p-type semiconductor oxides that have been recently proposed as the electrode in p-type dye-sensitized solar cells (p-DSSC) which is an alternative to the standard, low-performing nickel oxide. To assess this potential application of delafossites, we report here a DFT-based investigation of the structural and electronic properties of CuAlO2, CuGaO2 and CuCrO2. In particular, we address the role of Mg doping to obtain the p-type semiconducting character: the substitution of an M3+ cation with Mg2+ is easier with Ga than with Al and Cr, and, in all cases, the hole introduced by Mg2+ leads to the formation of Cu2+ species. Moreover, we address surface electronic features in order to characterize the most exposed delafossite surface termination and, more importantly, to predict the valence band maximum energy value, which determines the p-DSSC open circuit potential. From analysis of all our results, CuGaO2 emerges as the most promising system that can boost the development of new photocathodes for p-DSSCs.

Tunable Rh2(II,II) Light Absorbers as Excited-State Electron Donors and Acceptors Accessible with Red/Near-Infrared Irradiation

A series of dirhodium(II,II) paddlewheeel complexes of the type cis-[Rh₂(μ-DTolF)₂(μ-L)₂][BF₄]₂, where DTolF = N,N'-di( p-tolyl)formamidinate and L = 1,8-naphthyridine (np), 2-(pyridin-2-yl)-1,8-naphthyridine (pynp), 2-(quinolin-2-yl)-1,8-naphthyridine (qnnp), and 2-(1,8-naphthyridin-2-yl)quinoxaline (qxnp), were synthesized and characterized. These molecules feature new tridentate ligands that concomitantly bridge the dirhodium core and cap the axial positions. The complexes absorb light strongly throughout the ultraviolet/visible range and into the near-infrared region and exhibit relatively long-lived triplet excited-state lifetimes. Both the singlet and triplet excited states exhibit metal/ligand-to-ligand charge transfer (ML-LCT) in nature as determined by transient absorption spectroscopy and spectroelectrochemistry measurements. When irradiated with low-energy light, these black dyes are capable of undergoing reversible bimolecular electron transfer both to the electron acceptor methyl viologen and from the electron donor p-phenylenediamine. Photoinduced charge transfer in the latter was inaccessible with previous Rh₂(II,II) complexes. These results underscore the fact that the excited state of this class of molecules can be readily tuned for electron-transfer reactions upon simple synthetic modification and highlight their potential as excellent candidates for p- and n-type semiconductor applications and for improved harvesting of low-energy light to drive useful photochemical reactions.

Effect of auxiliary group for p-type organic dyes in NiO-based dye-sensitized solar cells: The first principal study

Auxiliary acceptor groups play a crucial role in D-A-π-A structured organic dyes. In this paper, we designed three D-A-π-A structured organic molecules based on the prototype dye QT-1, named ME18-ME20, and further investigated their electronic and optical properties with density functional theory (DFT) and time-dependent DFT (TDDFT). The calculated results indicate that the scope and intensity of dyes' absorption spectra have some outstanding changes by inserting auxiliary groups. ME20 has not only 152nm redshifts to long wave orientation, but also 78% increased oscillator strength compared to QT-1, and its absorption spectrum broadens region even up to 1400nm. Then, we studied the reason that the effect of the introduced different auxiliary acceptor groups in these dyes through their ground states geometries and energy levels, electron transfer and recombination rate.

Photoelectrodes based on 2D opals assembled from Cu-delafossite double-shelled microspheres for an enhanced photoelectrochemical response

Although a unique light-harvesting property was recently demonstrated in a photocathode based on 2-dimensional (2D) opals of CuFeO₂-shelled SiO₂ microspheres, the performance of a monolayer of ultra-thin CuFeO₂-shelled microspheres is limited by ineffective charge separation. Herein, we propose an innovative design rule, in which an inner CuFeO₂/outer CuAlO₂ double-shelled heterojunction is formed on each partially etched microsphere to obtain a hexagonally assembled 2D opal photoelectrode. Our Cu-delafossite double-shelled photocathode shows a dramatically improved charge separation capability, with a 9-fold increase in the photocurrent compared to that of the single-shelled counterpart. Electrochemical impedance spectroscopy clearly confirms the reduced charge transport/transfer resistance associated with the Cu-delafossite double-shelled photocathode, while surface photovoltage spectra reveal enhanced polarization of the photogenerated carrier, indicating improved charge separation capability with the aid of the heterojunction. Our finding sheds light on the importance of heterojunction interfaces in achieving optimal charge separation in opal architectures as well as the inner-shell/electrolyte interface to expedite charge separation/transport.

Solar H2 generation in water with a CuCrO2 photocathode modified with an organic dye and molecular Ni catalyst

Dye-sensitised photoelectrochemical (DSPEC) cells have emerged in recent years as a route to solar fuel production. However, fuel-forming photocathodes are presently limited by photo-corrodible narrow band gap semiconductors or the small range of available wide bandgap p-type semiconductors such as NiO that display low performance with dyes. Here, we introduce CuCrO2 as a suitable p-type semiconductor for visible light-driven H2 generation upon co-immobilisation of a phosphonated diketopyrrolopyrrole dye with a Ni-bis(diphosphine) catalyst. The hybrid CuCrO2 photocathode displays an early photocurrent onset potential of +0.75 V vs. RHE and delivers a photocurrent of 15 μA cm-2 at 0.0 V vs. RHE in pH 3 aqueous electrolyte solution under UV-filtered simulated solar irradiation. Controlled potential photoelectrolysis at 0.0 V vs. RHE shows good stability and yields a Ni catalyst-based turnover number of 126 ± 13 towards H2 after 2 h. This precious metal-free system outperforms an analogous NiO|dye/catalyst assembly and therefore highlights the benefits of using CuCrO2 as a novel material for DSPEC applications.

A low temperature hydrothermal synthesis of delafossite CuCoO2 as an efficient electrocatalyst for the oxygen evolution reaction in alkaline solutions

CuCoO₂ crystals were prepared at 100 °C through a hydrothermal method and used for the oxygen evolution reaction in alkaline solution.

p-Type CuCrO2 particulate films as the hole transporting layer for CH3NH3PbI3 perovskite solar cells

CuCrO₂ with a crystal structure of delafossite is a promising material as a transparent conducting oxide.

Optimizing CuO p-type dye-sensitized solar cells by using a comprehensive electrochemical impedance spectroscopic study

We introduce a novel and comprehensive approach for the evaluation and interpretation of electrochemical impedance spectroscopy (EIS) measurements in p-type DSSCs. In detail, we correlate both the device performance and EIS figures-of-merit of a series of devices in which, the calcination temperature, film thickness, and electrolyte concentration have been systematically modified. This new approach enables the separation of the different processes across the dye/semiconductor/electrolyte interface, namely the unfavorable charge recombination and the favorable electron injection/regeneration processes. In addition, studies on non-sensitized CuO and NiO electrodes provide insights into their affinity towards a reaction with the electrolyte - CuO is far less reactive towards the polyiodide species. Overall, this work underlines the superior features of CuO with respect to NiO for p-DSSCs and demonstrates a comprehensive optimization of the CuO-based DSSCs with respect to the device architecture by the aid of EIS analysis.

Finding the Way to Solar Fuels with Dye-Sensitized Photoelectrosynthesis Cells

The dye-sensitized photoelectrosynthesis cell (DSPEC) integrates high bandgap, nanoparticle oxide semiconductors with the light-absorbing and catalytic properties of designed chromophore-catalyst assemblies. The goals are photoelectrochemical water splitting into hydrogen and oxygen and reduction of CO₂ by water to give oxygen and carbon-based fuels. Solar-driven water oxidation occurs at a photoanode and water or CO₂ reduction at a cathode or photocathode initiated by molecular-level light absorption. Light absorption is followed by electron or hole injection, catalyst activation, and catalytic water oxidation or water/CO₂ reduction. The DSPEC is of recent origin but significant progress has been made. It has the potential to play an important role in our energy future.

Solid state p-type dye-sensitized solar cells: concept, experiment and mechanism

Solid state p-type dye-sensitized solar cells (p-ssDSCs) have been proposed and fabricated for the first time, using the organic dye P1 as the sensitizer on mesoporous NiO and phenyl-C61-butyric acid methyl ester (PCBM) as the electron conductor. The p-ssDSC has shown an impressive open circuit photovoltage of 620 mV. Femtosecond and nanosecond transient absorption spectroscopy has given evidence for sub-ps hole injection from the excited P1 to NiO, followed by electron transfer from P1˙(-) to PCBM.

Photoluminescence and photocatalytic properties of rhombohedral CuGaO2 nanoplates

Rhombohedral phase CuGaO₂ nanoplates with a diameter of about 10 μm were synthesized via low temperature hydrothermal method. Room temperature and low temperature photoluminescence of the obtained CuGaO₂ nanoplates were characterized. CuGaO₂ nanoplates exhibited blue emission at room temperature and free exciton emission were appeared at low temperature. The blue emission is originated from defects such as Cu vacancies, which is the possible origin of p-type conductivity. The appearance of free exciton emission can demonstrate the direct bandgap transition behavior of CuGaO₂ nanoplates. The as-prepared p-type CuGaO₂ nanoplates were further decorated by n-type ZnO nanoparticles via calcination method to fabricate p-n junction nanocomposites. The nanocomposites exhibited enhanced photocatalytic activity which can be ascribed to the effective separation of photogenerated carriers by the internal electrostatic field in the p-n junction region, and the enhanced light absorption properties resulted from sub-bandgap absorption effect of p-n junction. This work has offered a new insight into the design of p-n junction devices using p-type CuGaO₂ nanoplates.

Inorganic salt templated porous TiO2 photoelectrode for solid-state dye-sensitized solar cells

Salt template induced TiO₂ photoelectrodes with channels (or pores) were applied to improve the photoelectric conversion efficiency of solid-state dye-sensitized solar cells.

Copper borate as a photocathode in p-type dye-sensitized solar cells

Copper borate as a photocathode in p-type dye-sensitized solar cells.

Delafossite Nanoparticle as New Functional Materials: Advances in Energy, Nanomedicine and Environmental Applications

Recently, numerous delafossite oxides in nanoscale have been reported for diverse applications. The present review summarized the recent overall views of delafossite nanoparticles in diverse applications such as energy, catalysis, photocatalysis, nanomedicine, sensors, electrochemical devices and environmental concerns. Delafossite nanoparticles possess unique features such as different and wide chemical composition, large surface area, small energy gap, ability for further functionalization, possess dual-active sites with different oxidation states (A+and M3+), and eager for doping with various species with feasibility to undergo structure modification. Thus, they provided promising application such as solar cell, photocatalysis, hydrogen production, bioactive materials, separation purposes and others. Pros, cons, current and future status were also reviewed.

Molecular Catalyst Immobilized Photocathodes for Water/Proton and Carbon Dioxide Reduction

As one of the components in a tandem photoelectrochemical cell for solar-fuel production, the photocathode carries out the reduction reaction to convert solar light and the corresponding substrate (e.g., proton and CO2) into target fuels. Immobilizing molecular catalysts onto the photocathode is a promising strategy to enhance the interfacial electron/hole-transfer process and to improve the stability of the catalysts. Furthermore, the molecular catalysts are beneficial in improving the selectivity of the reduction reaction, particularly for CO2 reduction. On the photocathode, the binding mode of the catalysts and the arrangement between the photosensitizer and the catalyst also play crucial roles in the performance and stability of the final device. How to firmly and effectively immobilize the catalyst on the photoelectrode is now becoming a scientific question. Recent publications on molecular catalyst immobilized photocathodes are therefore surveyed.

Tuning Interfacial Electron Transfer in Nanostructured Cuprous Oxide Photoelectrochemical Cells with Charge-Selective Molecular Coatings

The coating of nanostructured films of cuprous oxide with electroactive molecules strongly affects their photoelectrochemical performance in nonaqueous photocells, with photocurrent density increased up to an order of magnitude relative to bare cuprous oxide films or almost completely suppressed, depending on the choice of molecular adsorbant. Among adsorbants that enhance photocurrent, a strong variance of photoelectrochemical behavior is observed with changes in the molecular structure of the sensitizer, associated with differences in the reorganization energy and molecular size, which are interpreted to enhance forward electron transport and impede electrolyte/photocathode recombination, respectively. These results demonstrate that nanostructured cuprous oxide is a promising cathode material for p-type dye-sensitized solar cells.

Solution Synthesized p-Type Copper Gallium Oxide Nanoplates as Hole Transport Layer for Organic Photovoltaic Devices

p-Type metal-oxide hole transport layer (HTL) suppresses recombination at the anode and hence improves the organic photovoltaic (OPV) device performance. While NiOx has been shown to exhibit good HTL performance, very thin films (<10 nm) are needed due to its poor conductivity and high absorption. To overcome these limitations, we utilize CuGaO2, a p-type transparent conducting oxide, as HTL for OPV devices. Pure delafossite phase CuGaO2 nanoplates are synthesized via microwave-assisted hydrothermal reaction in a significantly shorter reaction time compared to via conventional heating. A thick CuGaO2 HTL (∼280 nm) in poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) devices achieves 3.2% power conversion efficiency, on par with devices made with standard HTL materials. Such a thick CuGaO2 HTL is more compatible with large-area and high-volume printing process.

Hydrothermal synthesis of delafossite CuFeO2 crystals at 100 °C

We report the CuFeO₂ crystals with submicron-sized could be prepared through hydrothermal reaction at 100 °C for the first time.