One-dimensional CdS/ZnO core/shell nanofibers via single-spinneret electrospinning: tunable morphology and efficient photocatalytic hydrogen production

Support based metal incorporated layered nanomaterials for photocatalytic degradation of organic pollutants

An effective approach to producing sophisticated miniaturized and nanoscale materials involves arranging nanomaterials into layered hierarchical frameworks. Nanostructured layered materials are constructed to possess isolated propagation assets, massive surface areas, and envisioned amenities, making them suitable for a variety of established and novel applications. The utilization of various techniques to create nanostructures adorned with metal nanoparticles provides a secure alternative or reinforcement for the existing physicochemical methods. Supported metal nanoparticles are preferred due to their ease of recovery and usage. Researchers have extensively studied the catalytic properties of noble metal nanoparticles using various selective oxidation and hydrogenation procedures. Despite the numerous advantages of metal-based nanoparticles (NPs), their catalytic potential remains incompletely explored. This article examines metal-based nanomaterials that are supported by layers, and provides an analysis of their manufacturing, procedures, and synthesis. This study incorporates both 2D and 3D layered nanomaterials because of their distinctive layered architectures. This review focuses on the most common metal-supported nanocomposites and methodologies used for photocatalytic degradation of organic dyes employing layered nanomaterials. The comprehensive examination of biological and ecological cleaning and treatment techniques discussed in this article has paved the way for the exploration of cutting-edge technologies that can contribute to the establishment of a sustainable future.

CdS/ZnS core-shell nanorod heterostructures co-deposited with ultrathin MoS2 cocatalyst for competent hydrogen evolution under visible-light irradiation

Hydrogen generation via semiconductor photocatalysts has gained significant attention as a sustainable fuel generation process. To demonstrate the performance of nanoscale core-shell heterostructure in photocatalytic hydrogen production, we have fabricated CdS nanorods coated with ZnS photocatalyst via wet-chemical reaction followed by deposition of ultrathin MoS2 nanosheets by photo reduction process. The effect of ZnS content and suitable amount of MoS2 loading over the visible-light induced photocatalytic hydrogen evolution was examined in Na2S and Na2SO3 aqueous solutions. Interestingly, it is apparent that a close connection (or heterojunction) between CdS and ZnS is believed to easily tunnel the charge carriers to the surplus surface states, making its electrons and holes energetically favourable to transfer from ZnS to MoS2 for photocatalytic reactions and subsequently, enhances the H2 evolution activity in CdS/ZnS type I core-shell heterostructures. The optimal MoS2 concentration is resolved to be 7 mol% and the subsequent visible-light induced H2 generation rate was 13589 μmol h-1g-1, which is 19 and 158 fold higher than pristine CdS and ZnS respectively. The probable photocatalytic mechanism of CdS/ZnS type I core-shell heterostructure with MoS2 cocatalyst is proposed. Our inexpensive and convenient preparation strategy may offer novel prospects in the engineering of desirable nanoheterostructures with better performance.

Ni(OH)2 Nanosheet as an Efficient Cocatalyst for Improved Photocatalytic Hydrogen Evolution over Cd0.9Zn0.1S Nanorods under Visible Light

Loading cocatalysts to promote spatial charge separation has been confirmed as an effective method for improving photocatalytic hydrogen production. This article reports that the synthesis of Ni(OH)2/Cd0.9Zn0.1S nanorod photocatalyst is suitable for photocatalytic H2 generation under visible light. It can be proven that the binary photocatalyst exhibits a one-dimensional nanorod morphological structure. Ni(OH)2 nanosheets occupy the top area of Cd0.9Zn0.1S nanorods. The photocatalytic H2 production rate can reach 132.93 mmol·h-1·g-1, which corresponds to an apparent quantum efficiency of up to 76.5% at a wavelength of 460 nm. In addition, the Ni(OH)2 nanosheet can aggregate the light-incited electrons of Cd0.9Zn0.1S, inhibiting the confluence of electrons and holes. The detailed analysis of its mechanism through characterization methods such as photoluminescence and electrochemical measurement shows that the significant improvement in photocatalytic performance derives from the effective spatial separation of photo-induced charge carriers. Therefore, this synthesis strategy of one-dimensional materials may bring new prospects for more efficient, stable, and sustainable photocatalysis for water splitting.

Enhancing decomposition of rhodamine (RhB) and methylene blue (MB) using CdS decorated with Ag or Ru driven by visible radiation

The development of photocatalysts has an influential role in solving the environmental pollution crisis. Herein, the two different noble metals of silver (Ag)/ruthenium (Ru) were separately decorated on cadmium sulfide (CdS) photocatalysts by novel chemical methods. Characterization tests confirmed the formation of Ag/Ru-decorated CdS with spherical morphologies. According to the DRS and PL experiments, Ru-decorated CdS accounted for the highest light absorbance and the most accelerated transfer and detachment of photoelectrons/holes, followed by Ag-decorated CdS compared to pure CdS, which brought proper optical properties of Ag/Ru-decorated CdS. The photodecomposition of methylene blue (MB)/rhodamine B (RhB) as dyes and phenol as a colorless pollutant in the presence of Ag-decorated CdS (96%, 95%, and 69%) and Ru-decorated CdS (100%, 100%, and 80%) exposed to visible light radiation climbed compared to pure CdS (80%, 67%, and 61%) respectively. The influence of various parameters on the MB/RhB photocatalytic activity was investigated. The quenching experiment determined the functions of active species. Finally, experimental results proved that the MB/RhB photodecomposition by Ag/Ru-decorated CdS followed the pseudo-first-order kinetic model.

Synthesis of Zn3V2O8/rGO Nanocomposite for Photocatalytic Hydrogen Production

In this study, zinc vanadate/reduced graphene oxide (Zn3V2O8/rGO) composite has been synthesized via a simple approach. Advanced characterization techniques (powder X-ray, scanning electron microscopy, energy dispersive X-ray spectroscopy and ultraviolet-visible (UV-vis) spectroscopy) have been used to authenticate the formation of Zn3V2O8/rGO composite. Subsequently, Zn3V2O8/rGO was applied as photo-catalyst for hydrogen generation using photo-catalysis. The Zn3V2O8/rGO photo-catalyst exhibited a good hydrogen generation amount of 104.6 µmolg−1. The Zn3V2O8/rGO composite also demonstrates excellent cyclic stability which indicated better reusability of the photo-catalyst (Zn3V2O8/rGO). This work proposes a new photo-catalyst for H2 production application. We believe that the presence of synergistic interactions was responsible for the improved photo-catalytic properties of Zn3V2O8/rGO composite. The Zn3V2O8/rGO composite is an environmentally friendly and cost-effective photo-catalyst and can be used for photo-catalytic applications.

Visualization the fixation of cadmium on manganese dioxide in sulfur reduction environments

Manganese oxides as common soil components were considered as an important sink for the cadmium pollution, which, however, would be affected by the reductive sulfide introduced during the flooding period of paddy soil. In this study, the phase transitions caused by the reactions among S^2-, MnO₂ and Cd²⁺ were visualized by atomic force microscopy (AFM). The dissolution of MnO₂ was in-situ studied by AFM in the S^2-containing environments. Moreover, in the ternary system (S^2-, MnO₂ and Cd²⁺), the pre-adsorption of Cd²⁺ by the MnO₂ nanosheets would promote the subsequent precipitation of CdS on the surface of MnO₂, while the pre-formed CdS nanoparticles in the aquatic phase would tend to suspense rather than precipitating on MnO₂. The kinetic study results indicated that the CdS crystallite generation rate was faster than the MnO₂ dissolution rate in the aquatic environments with different sulfide contents. In the macroscopic Cd²⁺ fixation test, the introduction of S^2- dramatically improved the fixation of the pre-adsorbed Cd²⁺ on the MnO₂ nanosheets by forming the CdS precipitate. This study provided a fundamental understanding of the interactions among the S^2-, MnO₂ and Cd²⁺ ternary system and shed light on the development of Cd pollution remediation methods for paddy soils.

Preparation of CuS/PbS/ZnO Heterojunction Photocatalyst for Application in Hydrogen Production

A hexagonal wurtzite ZnO photocatalyst was prepared via a precipitation method. CuS nanoparticles (NPs) and PbS quantum dots (QDs) were loaded onto ZnO via a hydrothermal method to obtain a CuS/PbS/ZnO heterojunction photocatalyst. The CuS/PbS/ZnO photocatalyst obtained via the abovementioned method has significant absorption capabilities in the ultraviolet to near-infrared spectral regions, and effectively reduced the recombination of electron–hole pairs during a photocatalytic reaction. Electron microscope images showed that in the CuS/PbS/ZnO photocatalyst prepared at 130 °C, the particle size of the PbS QDs was approximately 5.5–5.7 nm, and the bandgap determined from the Tauc plot was 0.84 eV; this catalyst demonstrated the best water splitting effect. Furthermore, after adding a 0.25 M mixed solution of Na2S and Na2SO3 as the sacrificial reagent in photocatalysis for 5 h, the hydrogen production efficiency from water splitting reached 6654 μmol g−1 h−1.

Nanomaterials as a Sustainable Choice for Treating Wastewater: A Review

The removal of dyes from textile effluents utilizing advanced wastewater treatment methods with high efficiency and low cost has received substantial attention due to the rise in pollutants in water. The purpose of this work is to give a comprehensive analysis of the different treatments for removing chemical dyes from textile effluents. The capability and potential of conventional treatments for the degradation of dyeing compounds in aqueous media, as well as the influence of multiple parameters, such as the pH solution, initial dye concentration, and adsorbent dose, are presented in this study. This study is an overview of the scientific research literature on this topic, including nanoreductive and nanophotocatalyst processes, as well as nanoadsorbents and nanomembranes. For the purpose of treating sewage, the special properties of nanoparticles are currently being carefully researched. The ability of nanomaterials to remove organic matter, fungus, and viruses from wastewater is another benefit. Nanomaterials are employed in advanced oxidation techniques to clean wastewater. Additionally, because of their small dimensions, nanoparticles have a wide effective area of contact. Due to this, nanoparticles' adsorption and reactivity are powerful. The improvement of nanomaterial technology will be beneficial for the treatment of wastewater. This report also offers a thorough review of the distinctive properties of nanomaterials used in wastewater treatment, as well as their appropriate application and future possibilities. Since only a few types of nanomaterials have been produced, it is also important to focus on their technological feasibility in addition to their economic feasibility. According to this study, nanoparticles (NPs) have a significant adsorption area, efficient chemical reactions, and electrical conductivity that help treat wastewater effectively.

The doping of B in ZnO@CdS for enhanced visible-light H2 production

The visible-light water splitting enhancement of B in ZnO@CdS was systematically studied and the B doped ZnO@CdS rods (B-ZnO@CdS) showed an excellent H2 generation rate of 13.1 mmol h-1g-1, mostly...

Tailoring atomic diffusion for in situ fabrication of different heterostructures

Atomic diffusion has been recognized as a particularly powerful tool in the synthesis of heterostructures. However, controlled atomic diffusion is very difficult to achieve in the fabrication of individual nanostructures. Here, an electrically driven in situ solid-solid diffusion reaction inside a TEM is reported for the controlled fabrication of two different hetero-nanostructures in the Ag-Te system. Remarkably, the morphology and structure of the as-formed heterostructures are strongly dependent on the path of atomic diffusion. Our experiments revealed that the surface diffusion of Te atoms to Ag nanowires leads to a core-shell structure, while the bulk diffusion of Ag atoms give rise to a Ag₂Te-Te segmented heterostructure. Heat released by Joule heating caused the surface diffusion process to be replaced by bulk diffusion and thereby determined the structure of the final product. Our experimental results provide an insight into solid-state diffusion reactions under an electric field and also propose a new process for the fabrication of complex nanostructures.

Atomic diffusion is a powerful tool for the synthesis of heterostructures, even though controlled atomic diffusion is difficult to achieve. Here, the authors control solid-solid atomic diffusion between an Ag nanowire and a Te nanowire, producing 1D heterostructures by applying an electrical bias inside a TEM.

Metal chalcogenide-based core/shell photocatalysts for solar hydrogen production: Recent advances, properties and technology challenges

Metal chalcogenides play a vital role in the conversion of solar energy into hydrogen fuel. Hydrogen fuel technology can possibly tackle the future energy crises by replacing carbon fuels such as petroleum, diesel and kerosene, owning to zero emission carbon-free gas and eco-friendliness. Metal chalcogenides are classified into narrow band gap (CdS, Cu₂S, Bi₂S_3, MoS_2, CdSe and MoSe₂) materials and wide band gap materials (ZnS, ZnSe and ZnTe). Composites of these materials are fabricated with different architectures in which core-shell is one of the unique composites that drastically improve the photo-excitons separation, where chalcogenides in the core can be well protected for sustainable uses. Thus,the core-shell structures promote the design and fabrication of composites with the required characteristics. Interestingly, the metal chalcogenides as a core-shell photocatalyst can be classified into type-I, reverse type-I, type-II and S-type nanocomposites, which can effectively influence and significantly enhance the rate of hydrogen production. In this direction, this review is undertaken to provide a comprehensive overview of the advanced preparation processes, properties of metal chalcogenides, and in particular, photocatalytic performance of the metal chalcogenides as a core-shell photocatalysts for solar hydrogen production.

Monodispersed core/shell nanospheres of ZnS/NiO with enhanced H2 generation and quantum efficiency at versatile photocatalytic conditions

This investigation is first to elucidate the synthesis of mono-dispersed ZnS/NiO-core/shell nanostructures with a uniform thin layer of NiO-shell on the ZnS-nanospheres as a core under controlled thermal treatments. NiO-shell thickness varied to 8.2, 12.4, 18.2, and 24.2 nm, while the ZnS-core diameter remained stable about 96 ± 6 nm. The crystalline phase and core/shell structure of the materials were confirmed using XRD and HRTEM techniques, respectively. Optical properties through UV-vis spectroscopy analysis revealed the manifestation of red-shift in the absorption spectrum of core/shell materials, while the XPS analysis of elements elucidated their stable oxidation states in ZnS/NiO core/shell structure. The optimized ZnS/NiO-core/shell showed 1.42 times higher H₂ generation (162.1 mmol h^-1 g^-1_cat) than the pristine ZnS-core (113.2 mmol h^-1 g^-1_cat), and 64.5 times higher than the pristine NiO-shell (2.5 mmol h^-1 g^-1_cat). The quantum efficiency at wavelengths of 420, 365 nm, and 1.5 G air mass filters was found to be 13.5%, 25.0%, and 45.3%, respectively. Water splitting experiments was also performed without addition of any additives, which showed enhanced H₂ gas evolution of 1.6 mmol h^-1 g^-1_cat under the sunlight illumination. Photoelectrochemical measurements revealed the stable photocurrent density and minimized charge recombination in the system. The performed recyclability and reusability tests for five recycles demonstrated the excellent stability of the developed photocatalysts.

WO3 nanoplates decorated with polyaniline and CdS nanoparticles as a new photocatalyst for degradation of imidacloprid pesticide from water

This study focused on the photocatalytic degradation of imidacloprid (IM) in water as the model pesticides. The effective division of photogenerated charge carriers is important in the photocatalytic reactions. So, a new PANI/WO₃-CdS photocatalyst was synthesized by a simple method. The prepared PANI/WO₃-CdS nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy compatible with energy dispersive spectroscopy (FESEM-EDS), and X-ray diffraction (XRD). Degradation of IM pesticide under visible light irradiation was carried out to investigate the photocatalytic efficiency of the prepared nanocomposite. The effect of operational parameters on the degradation performance of pesticides was studied by response surface methodology (RSM). The optimum conditions for photocatalytic degradation of IM (94.7%) were found to be 10 ppm of IM, 150 mg of PANI/WO₃-CdS, and pH = 3.0. The apparent rate constant of IM photodegradation over PANI/WO₃-CdS was 0.016 min^-1. According to results, PANI/WO₃-CdS can serve as an efficient, and recyclable photocatalyst for imidacloprid degradation in an aqueous media.

WO3 nanoplates decorated with polyaniline and CdS nanoparticles as a new photocatalyst for degradation of imidacloprid pesticide from water

This study focused on the photocatalytic degradation of imidacloprid (IM) in water as the model pesticides. The effective division of photogenerated charge carriers is important in the photocatalytic reactions. So, a new PANI/WO₃-CdS photocatalyst was synthesized by a simple method. The prepared PANI/WO₃-CdS nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy compatible with energy dispersive spectroscopy (FESEM-EDS), and X-ray diffraction (XRD). Degradation of IM pesticide under visible light irradiation was carried out to investigate the photocatalytic efficiency of the prepared nanocomposite. The effect of operational parameters on the degradation performance of pesticides was studied by response surface methodology (RSM). The optimum conditions for photocatalytic degradation of IM (94.7%) were found to be 10 ppm of IM, 150 mg of PANI/WO₃-CdS, and pH = 3.0. The apparent rate constant of IM photodegradation over PANI/WO₃-CdS was 0.016 min^-1. According to results, PANI/WO₃-CdS can serve as an efficient, and recyclable photocatalyst for imidacloprid degradation in an aqueous media.

Transition metal sulfides meet electrospinning: versatile synthesis, distinct properties and prospective applications

One-dimensional (1D) electrospun nanomaterials have attracted significant attention due to their unique structures and outstanding chemical and physical properties such as large specific surface area, distinct electronic and mass transport, and mechanical flexibility. Over the past years, the integration of metal sulfides with electrospun nanomaterials has emerged as an exciting research topic owing to the synergistic effects between the two components, leading to novel and interesting properties in energy, optics and catalysis research fields for example. In this review, we focus on the recent development of the preparation of electrospun nanomaterials integrated with functional metal sulfides with distinct nanostructures. These functional materials have been prepared via two efficient strategies, namely direct electrospinning and post-synthesis modification of electrospun nanomaterials. In this review, we systematically present the chemical and physical properties of the electrospun nanomaterials integrated with metal sulfides and their application in electronic and optoelectronic devices, sensing, catalysis, energy conversion and storage, thermal shielding, adsorption and separation, and biomedical technology. Additionally, challenges and further research opportunities in the preparation and application of these novel functional materials are also discussed.

Fabrication of stable high-performance urchin-like CeO2/ZnO@Au hierarchical heterojunction photocatalyst for water remediation

In this paper, the urchin-like CeO₂/ZnO@Au photocatalyst was rationally designed and prepared through hydrothermal method, chemical precipitation and photo reduction deposition. The optimal photocatalyst (CZA8) degraded Rhodamine B (RhB), 4-nitrophenol (4-NP) and Naproxen (NPX) about 100% within 20 min, 91.4% within 60 min and 88.9% within 30 min under Xe lamp illumination, respectively. Besides, the CZA8 possesses outstanding photo corrosion resistance capacity which has been verified with the cycle degradation experiments. The photocatalyst displays excellent light response and efficient separation of photo-induced carriers due to the fabrication of type-II heterojunction, the presence of surface plasmon resonance (SPR) effect and as well as the oxygen vacancy. The oxygen vacancy was systematically characterized by XPS, PL and Raman. Moreover, the photocatalytic degradation pathways are proposed based on the LC-MS results. Finally, a novel photocatalytic mechanism for photocatalytic oxidation of RhB, 4-NP and NPX is discussed and schematically illuminated.

Electrospun nanofibers with surface oriented lamellar patterns and their potential applications

This work shows conclusively that lamellar surface patterns can be obtained with diverse ceramic compositions during electrospinning. The lamellar structure formation is governed by the creation of an outer shell during the thermal treatment of initially uniform cylindrical fibers, consisting of polymer and pre-ceramic compounds. By changing the polymer to pre-ceramic ratio in the electrospinning solution, we demonstrate for the first time a facile way to control the obtained surface structure and the orientation of the lamellas. Furthermore, the lamellar morphology was illustrated in seven different compositions. This report provides a new pathway to obtain unique surface patterns in metal-oxide nanofibers and demonstrates their utilization in different applications. Specifically, we demonstrate the prospect of utilizing Ni-Al-O fibers with lamellar structures as alternative Li-ion battery anodes. In addition, we show the potential of Fe-Al-O fibers as an effective catalyst material.

Electrospun Fe-Al-O Nanobelts for Selective CO2 Hydrogenation to Light Olefins

Ceramic nanobelt catalysts consisting of Fe-Al-O spinel modified with potassium were synthesized for CO₂ hydrogenation into hydrocarbons. Nanobelts and hollow nanofibers were produced utilizing the internal heat released by oxidation of the organic component within the fibers. This extremely fast and short heating facilitated crystallization of the desired phase, while maintaining small grains and a large surface area. We investigated the effects of mat thickness, composition, and heating rate on the final morphology. A general transformation mechanism for electrospun nanofibers that correlates for the first time the mat's thickness and the rate of oxidation during thermal treatment was proposed. The catalytic performance of carburized ceramic K/Fe-Al-O nanobelts was compared to the K/Fe-Al-O spinel powder. The electrospun catalyst showed a superior carbon dioxide conversion of 48% and a selectivity of 52% to light C₂-C₅ olefins, while the powder catalyst produced mainly C₆⁺ hydrocarbons. Characterization of steady state catalytic materials by energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and N₂-adsorption methods revealed that high olefin selectivity of the electrospun materials is related to a high extent of reduction of surface iron atoms because of more efficient interaction with the potassium promoter.

Patterned nanofiber air filters with high optical transparency, robust mechanical strength, and effective PM2.5 capture capability

PM_2.5, due to its small particle size, strong activity, ease of the attachment of toxic substances and long residence time in the atmosphere, has a great impact on human health and daily production. In this work, we have presented patterned nanofiber air filters with high optical transparency, robust mechanical strength and effective PM_2.5 capture capability. Here, to fabricate a transparency air filter by a facile electrospinning method, we chose three kinds of patterned wire meshes with micro-structures as negative receiver substrates and directly electrospun polymer fibers onto the supporting meshes. Compared with randomly oriented nanofibers (named “RO NFs” in this paper) and commercially available facemasks, the patterned air filters showed great mechanical properties, and the water contact angles on their surfaces were about 122–143° (the water contact angle for RO NFs was 81°). In addition, the patterned nanofibers exhibited high porosity (>80%), and their mean pore size was about 0.5838–0.8686 μm (the mean pore size of RO NFs was 0.4374 μm). The results indicate that the transparent patterned air filters have the best PM_2.5 filtration efficiency of 99.99% at a high transmittance of ∼69% under simulated haze pollution.

PM_2.5, due to its small particle size, strong activity, ease of the attachment of toxic substances and long residence time in the atmosphere, has a great impact on human health and daily production.

Novel Low Temperature Route to Produce CdS/ZnO Composite Nanofibers as Effective Photocatalysts

In this work, CdS/ZnO composite nanofibers (NFs) were prepared by the electrospinning of a sol–gel comprised of poly(caprolactone), zinc acetate dihydrate, cadmium acetate dihydrate, and ammonium sulfide. The electrospun NF mats were calcined under vacuum in an argon (Ar) atmosphere at 200 °C for 1 h. Standard physiochemical analysis techniques demonstrated the formation of the crystalline hexagonal phase of CdS and ZnO. Composite NFs showed good photocatalytic degradation of methylene blue (MB) dye under visible light irradiation compared to their counterparts. CdS nanoparticles, ZnO nanofibers, and composite NFs photodegraded 35.5%, 47.3%, and 90% of the MB dye, respectively, within 100 min. The reaction kinetics of MB photodegradation using the composite NFs followed the pseudo-first-order relation. Owing to their facile preparation and good photodegradation ability, the proposed method can be used to prepare various photocatalysts for wastewater treatment.

Fabrication of CdS-SBA-15 nanomaterials and their photocatalytic activity for degradation of salicylic acid under visible light

CdS-SBA-15 nanomaterials were synthesized by solvothermal method using cadmium nitrate as cadmium source and thiourea as sulfur source. The properties of as-prepared materials were characterized by means of XRD, FTIR, TEM, XPS, N₂ physisorption, UV-Vis DRS and PL spectra, etc. The results show as-synthesized materials have partially ordered mesoporous structure, larger specific surface area, and higher content of CdS and good crystallinity. The combination of SBA-15 and CdS did almost no reduction in the absorption light range of CdS, but greatly increased the photocapacity of the composite. The synergistic effect of CdS and SBA-15 leads to improving the photocatalytic degradation activity of salicylic acid under visible light. When the photocatalyst was 30 mg (0.75 g/L) and the concentration of salicylic acid was 10 mg/L, the maximum degradation efficiency of salicylic acid was 84.93% after 6 h of light. Photocatalytic reaction has a lower activation energy (2.90 kJ/mol), activation enthalpy (3.13 kJ/mol) and activation entropy (-281.00 J/(mol K)). The photocatalytic mechanism study demonstrates that superoxide radicals (O₂^•-) are the most key active species, e^- and h⁺ have something to do with the photocatalytic reaction, while ·OH has little to do with the photocatalytic reaction. In sum, the protection effect of SBA-15 on CdS nanomaterials makes the composite have a higher photolumination intensity and a higher photocatalytic activity.

High photosensitivity and external quantum efficiency photosensors achieved by a cable like nanoarchitecture

The poor intrinsic flexibility of semiconducting ceramic materials hinders their applications in wearable electronics. Here, we present a highly efficient photosensor with extreme levels of bending and repeatable resilience based on cable-like structure. The ZnO@TiO₂ cable-like photosensor demonstrates an ultra-high external quantum efficiency (2.82 × 10⁶%) and photosensitivity (1.27 × 10⁵) upon UV light illumination at 254 nm, and a stability of 85% at the small curvature radius of 0.5 mm. Moreover, the ZnO@TiO₂ photodetector demonstrates extremely stable flexibility over 1000 bending cycles. This specific nanoscale architecture has future potential applications for soft integrated electronics.

Omnidirectional Au-embedded ZnO/CdS core/shell nanorods for enhanced photoelectrochemical water-splitting efficiency

The charge transfer mechanism that enhanced the photoconversion efficiency of omnidirectional Au-embedded ZnO/CdS core/shell nanorods.

CdS quantum dots/Au nanoparticles/ZnO nanowire array for self-powered photoelectrochemical detection of Escherichia coli O157:H7

In this paper, the hydrothermally grown ZnO nanowire array (NWs) was modified by Au nanoparticles (NPs) and CdS quantum dots (QDs) to construct a high-performance photoelectrochemical (PEC) electrode. The aligned ZnO NWs, which decorated Au NPs and CdS QDs have the effective light absorption range from UV to visible region. This hybrid structure provided a self-powered PEC electrode with a favorable energy-band configuration for fast charge separation and transportation. Meanwhile, the Au NPs and CdS QDs also made increase of the surface area to improve the immobilization of the analytes. After assembling aptamer as recognition element, this composite nanoarray was further developed as a self-powered PEC biosensor by synergizing above multiple enhancement factors. The PEC aptasensor exhibited a rapid response in a wide linear range of 10-10⁷ CFU/mL with the detection limit as low as 1.125 CFU/mL to Escherichia coli O157:H7 (E. coli O157:H7). This approach would offer an alternative PEC transduction for fast environment monitoring and clinical diagnosis related to pathogenic bacteria.

Core-shell nanomaterials: Applications in energy storage and conversion

Materials with core-shell structures have attracted increasing attention in recent years due to their unique properties and wide applications in energy storage and conversion systems. Through reasonable adjustments of their shells and cores, various types of core-shell structured materials can be fabricated with favorable properties that play significant roles in energy storage and conversion processes. The core-shell material can provide an effective solution to the current energy crisis. Various synthetic strategies used to fabricate core-shell materials, including the atomic layer deposition, chemical vapor deposition and solvothermal method, are briefly mentioned here. A state-of-the -art review of their applications in energy storage and conversion is summarized. The involved energy storage includes supercapacitors, li-ions batteries and hydrogen storage, and the corresponding energy conversion technologies contain quantum dot solar cells, dye-sensitized solar cells, silicon/organic solar cells and fuel cells. In addition, the correlation between the core-shell structures and their performance in energy storage and conversion is introduced, and this finding can provide guidance in designing original core-shell structures with advanced properties.

Nanostructures inducing distinctive photocatalytic and photoelectrochemical performance via the introduction of rGO into CdxZn1-xS

It is well known that efficient charge separation is a crucial factor for the enhancement of photocatalytic activity for hydrogen evolution, and the internal electric field is commonly designed to improve charge separation. The microstructure of a catalyst has a significant effect on the photocatalytic and photoelectrochemical (PEC) performance. Herein, two samples are engineered with similar morphology but different crystal structures. Small wurtzite (WZ)/zinc blende (ZB) -Cd0.6Zn0.4S nanorods are featured with dense type-II homojunctions. By utilizing the excellent thermal conductivity of graphene to eliminate thermal fluctuations, WZ-Cd0.6Zn0.4S/RGO is obtained by anchoring Cd0.6Zn0.4S nanorods on the graphene sheets. The elongated WZ/ZB-Cd0.6Zn0.4S nanorods with an internal electric field formed by the heterophase homojunction greatly improve the photocatalytic hydrogen production rate to 36.33 mmol h-1 g-1, much higher than that of WZ-Cd0.6Zn0.4S-RGO. On the contrary, WZ-Cd0.6Zn0.4S/RGO shows superior photoelectrochemical performance under an external electric field, benefiting from the excellent electric conduction and the 2D network of RGO as electron transportation channels. The study strategy and synthetic route for the Cd0.6Zn0.4S nanorods with a homojunction and a homogenous structure in our work may open up new avenues for the fabrication of other semiconductor materials with distinctive photocatalytic and PEC applications.

Enhanced hydrogen evolution from water splitting based on ZnO nanosheet/CdS nanoparticle heterostructures

As environmental and energy problems have worsened worldwide, research for developing renewable energy has become urgent. Presently, the primary focus of such research is directed towards the photocatalytic decomposition of water to produce hydrogen as an energy source. Herein, ZnO nanosheet/CdS nanoparticle heterostructures were synthesized by a mild wet chemical reaction and displayed a high photocatalytic efficiency (1040 μmol g⁻¹ h⁻¹) without Pt loading under visible light radiation. The structure was prepared by first constructing two-dimensional nanocrystalline ZnO flowers and then loading CdS nanoparticles onto the nanocrystals. Results show that this structure can facilitate the separation of photogenerated electrons and holes and improve the photocatalytic efficiency and stability of the materials in the photocatalytic decomposition of water. By changing different experimental conditions to prepare a variety of samples and test their properties, we can analyze the optimal parameters for the preparation of this material.

ZnO nanosheet/CdS nanoparticle heterostructures were synthesized by a mild wet chemical reaction and displayed high hydrogen production with free Pt loading under visible light radiation.

Branched CdO/ZnO Core/Shell Heterogeneous Structure and Its Enhanced Photoelectrocatalytic Performance

Branched nanostructures of semiconductors based on one-dimensional heterostructures have many promising applications in optoelectronics, supercapacitors, photocatalysts, etc. Here, we report a novel branched core/shell CdO/ZnO hetero-nanostructure that resembles a Crimson bottlebrush (Callistemon Citrinus) but with intriguing hexagonal symmetry. The nanomaterials were fabricated via an improved one-step chemical vapor deposition method and consist of a CdO wire as the core and ZnO as the shell. With cadmium acting as a catalyst, ZnO nanowires grow as perpendicular branches from the CdO/ZnO one-dimensional core/shell structure. The nanostructures were characterized with X-ray diffraction scanning and transmission electron microscopy. A homogeneous epitaxial growth mechanism has been postulated for the formation of the nanostructure. The materials show a broad and strong absorption ranging from visible to ultraviolet and a better photoelectrocatalytic properties in comparison to pure ZnO or CdO. Our synthetic strategy may open up a new way for controlled preparation of one-dimensional nanomaterials with core/shell heterostructure, which could find potential applications in solar cells and opto-electrochemical water-splitting devices.

Preparation of polyaniline/PbS core-shell nano/microcomposite and its application for photocatalytic H2 electrogeneration from H2O

Lead sulfide (PbS) and polyaniline (PANI) nano/microparticles were prepared. Then, PANI/PbS core-shell nano/microcomposites (I, II, and III) were prepared by oxidative polymerization of different aniline concentrations (0.01, 0.03, and 0.05 M), respectively, in the presence of 0.05 M PbS. FT-IR, XRD, SEM, HR-TEM, and UV-Vis analyses were carried out to characterize the samples. From the FT-IR data, there are redshifts in PbS and PANI nano/microparticles bands in comparison with PANI/PbS nano/microcomposites. The average crystallite sizes of PANI/PbS core-shell nano/microcomposites (I, II, and III) from XRD analyses were 46.5, 55, and 42.16 nm, respectively. From the optical analyses, nano/microcomposite (II) has the optimum optical properties with two band gaps values of 1.41 and 2.79 eV. Then, the nano/microcomposite (II) membrane electrode supported on ITO glass was prepared and applied on the photoelectrochemical (PEC) H₂ generation from H₂O. The characteristics current-voltage and current-time behaviors were measured at different wavelengths from 390 to 636 nm. Also, the incident photon-to-current conversion efficiency (IPCE) under monochromatic illumination condition was calculated. The optimum values for IPCE were 36.5 and 35.2% at 390 and 405 nm, respectively. Finally, a simple mechanism for PEC H₂ generation from H₂O using the nano/microcomposite (II) membrane electrode was mentioned.

Fabrication of selective interface of ZnO/CdS heterostructures for more efficient photocatalytic hydrogen evolution

Selective interface in ZnO/CdS heterostructure promote the photocatalytic activity.

β-NiS modified CdS nanowires for photocatalytic H2 evolution with exceptionally high efficiency

Synthesis of an exceptionally highly efficient NiS–CdS hybrid photocatalyst for H₂ evolution.

Co-catalysis is regarded as a promising strategy to improve the hydrogen evolution performance of semiconductor-based photocatalysts. But developing a simple and effective technique to achieve the optimal synergy between co-catalysts and host photocatalysts has been a great challenge. Herein, hybrid photocatalysts consisting of β-NiS modified CdS nanowires (NiS/CdS NWs) have been synthesized via a simple and green hydrothermal route using CdS NWs as the template from thiourea and nickel acetate in the presence of sodium hypophosphite. As a result, a metal Ni intermediate was formed via an electroless plating process assisted by H₂PO₂^–, which facilitated the growth of highly conducting flake-like β-NiS nanostructures onto the surface of the CdS NWs. With the optimal loading amount of NiS, the obtained NiS/CdS NWs present a record-high photocatalytic activity for H₂ evolution in lactic acid aqueous solutions under visible light irradiation. At 25 °C, the rate of H₂ evolution was measured as 793.6 μmol h^–1 (over a 5 mg photocatalyst sample), which is nearly 250-fold higher than that over pure CdS NWs, and the apparent quantum yield reached an exceptionally high value of 74.1% at 420 nm. The mechanism for the photocatalytic H₂ evolution over the present NiS/CdS NWs was also proposed. This strategy would provide new insight into the design and development of high-performance heterostructured photocatalysts.