Physiologically relevant, pH-responsive PEG-based block and statistical copolymers with N,N-diisopropylamine units

A guide to modern methods for poly(thio)ether synthesis using Earth-abundant metals

Polyethers and polythioethers have a long and storied history dating back to the start of polymer science as a distinct field. As such, these materials have been utilized in a wide range of commercial applications and fundamental studies. The breadth of their material properties and the contexts in which they are applied is ultimately owed to their diverse monomer pre-cursors, epoxides and thiiranes, respectively. The facile polymerization of these monomers, both historically and contemporaneously, across academia and industry, has occurred through the use of Earth-abundant metals as catalysts and/or initiators. Despite this, polymerization methods for these monomers are underutilized compared to other monomer classes like cyclic olefins, vinyls, and (meth)acrylates. We feel a focused review that clearly outlines the benefits and shortcomings of extant synthetic methods for poly(thio)ethers along with their proposed mechanisms and quirks will help facilitate the utilization of these methods and by extension the unique polymer materials they create. Therefore, this Feature Article briefly describes the applications of poly(thio)ethers before discussing the feature-set of each poly(thio)ether synthetic method and qualitatively scoring them on relevant metrics (e.g., ease-of-use, molecular weight control, etc.) to help would-be poly(thio)ether-makers find an appropriate synthetic approach. The article is concluded with a look ahead at the future of poly(thio)ether synthesis with Earth-abundant metals.

Synthesis and Characterizations of Bioactive Glass Nanoparticle-Incorporated Triblock Copolymeric Injectable Hydrogel for Bone Tissue Engineering

Recently, injectable hydrogels have attracted much interest in tissue engineering (TE) applications because of their controlled flowability, adaptability, and easy handling properties. This work emphasizes the synthesis and characterizations of bioactive glass (BAG) nanoparticle-reinforced poly(ethylene glycol) (PEG)- and poly(N-vinylcarbazole) (pNVC)-based minimally invasive composite injectable hydrogel suitable for bone regeneration. First, the copolymer was synthesized from a combination of PEG and pNVC through reversible addition-fragmentation chain-transfer (RAFT) polymerization and nanocomposite hydrogel constructs were subsequently prepared by conjugating BAG particles at varying loading concentrations. Gel permeation chromatography (GPC) analysis confirmed the controlled nature of the polymer. Various physicochemical characterization results confirmed the successful synthesis of copolymer and nanocomposite hydrogels that showed good gelling and injectability properties. Our optimal nanocomposite hydrogel formulation showed excellent swelling properties in comparison to the copolymeric hydrogel due to the presence of hydrophilic BAG particles. The bone cell proliferation rate was found to be evidently higher in the nanocomposite hydrogel than in the copolymeric hydrogel. Moreover, the enhanced level of ALP activity and apatite mineralization for the nanocomposite in comparison to that for the copolymeric hydrogel indicates accelerated in vitro osteogenesis. Overall, our study findings indicate BAG particle-conjugated nanocomposite hydrogels can be used as promising grafting materials in orthopedic reconstructive surgeries complementary to conventional bone graft substitutes in cancellous bone defects due to their 3D porous framework, minimal invasiveness, and ability to form any desired shape to match irregular bone defects.

Polyethers Based on Short-Chain Alkyl Glycidyl Ethers: Thermoresponsive and Highly Biocompatible Materials

The polymerization of short-chain alkyl glycidyl ethers (SCAGEs) enables the synthesis of biocompatible polyethers with finely tunable hydrophilicity. Aliphatic polyethers, most prominently poly(ethylene glycol) (PEG), are utilized in manifold biomedical applications due to their excellent biocompatibility and aqueous solubility. By incorporation of short hydrophobic side-chains at linear polyglycerol, control of aqueous solubility and the respective lower critical solution temperature (LCST) in aqueous solution is feasible. Concurrently, the chemically inert character in analogy to PEG is maintained, as no further functional groups are introduced at the polyether structure. Adjustment of the hydrophilicity and the thermoresponsive behavior of the resulting poly(glycidyl ether)s in a broad temperature range is achieved either by the combination of the different SCAGEs or with PEG as a hydrophilic block. Homopolymers of methyl and ethyl glycidyl ether (PGME, PEGE) are soluble in aqueous solution at room temperature. In contrast, n-propyl glycidyl ether and iso-propyl glycidyl ether lead to hydrophobic polyethers. The use of a variety of ring-opening polymerization techniques allows for controlled polymerization, while simultaneously determining the resulting microstructures. Atactic as well as isotactic polymers are accessible by utilization of the respective racemic or enantiomerically pure monomers. Polymer architectures varying from statistical copolymers, di- and triblock structures to star-shaped architectures, in combination with PEG, have been applied in various thermoresponsive hydrogel formulations or polymeric surface coatings for cell sheet engineering. Materials responding to stimuli are of increasing importance for "smart" biomedical systems, making thermoresponsive polyethers with short-alkyl ether side chains promising candidates for future biomaterials.

Dual-reactive nanogels for orthogonal functionalization of hydrophilic shell and amphiphilic network

Amphiphilic nanogels (NGs) combine a soft, water-swollen hydrogel matrix with internal hydrophobic domains. While these domains can encapsulate hydrophobic cargoes, the amphiphilic particle surface can reduce colloidal stability and/or limit biological half-life. Therefore, a functional hydrophilic shell is needed to shield the amphiphilic network and tune interactions with biological systems. To adjust core and shell properties independently, we developed a synthetic strategy that uses preformed dual-reactive nanogels. In a first step, emulsion copolymerization of pentafluorophenyl methacrylate (PFPMA) and a reduction-cleavable crosslinker produced precursor particles for subsequent network modification. Orthogonal shell reactivity was installed by using an amphiphilic block copolymer (BCP) surfactant during this particle preparation step. Here, the hydrophilic block poly(polyethylene glycol methyl ether methacrylate) (PPEGMA) contains a reactive alkyne end group for successive functionalization. The hydrophobic block (P(PFPMA-co-MAPMA) contains random methacryl-amido propyl methacrylamide (MAPMA) units to covalently attach the surfactant to the growing PPFPMA network. In the second step, orthogonal modification of the core and shell was demonstrated. Network functionalization with combinations of hydrophilic (acidic, neutral, or basic) and hydrophobic (cholesterol) groups gave a library of pH- and redox-sensitive amphiphilic NGs. Stimuli-responsive properties were demonstrated by pH-dependent swelling and reduction-induced degradation via dynamic light scattering. Subsequently, copper-catalyzed azide-alkyne cycloaddition was used to attach azide-modified rhodamine as model compound to the shell (followed by UV-Vis). Overall, this strategy provides a versatile platform to develop multi-functional amphiphilic nanogels as carriers for hydrophobic cargoes.

Amine-containing diblock terpolymers via AROP: a versatile method for the generation of multifunctional micelles

We herein report the synthesis and block copolymerization via AROP of three glycidyl amine species (PiGA; OPGA, and MPGA) with different hydrophobicity. Micelles formed from these block copolymers respond to changes in pH and H₂O₂ concentration.

Biodegradable cationic nanogels with tunable size, swelling and pKa for drug delivery

Cationic polymers have garnered significant interest for their utility in intracellular drug delivery and gene therapy. However, due to their associated toxicities, novel synthesis approaches must be explored to develop materials that are biocompatible. The novel library of nanoparticles synthesized in this study exhibit tunable hydrodynamic diameters, composition and pH-responsive properties as a function of synthesis parameters. In addition, differences in the responsiveness of these nanoparticles under different pH conditions affords greater control over intracellular drug release.

Amino-functional polyethers: versatile, stimuli-responsive polymers

Amino-functional polyethers have emerged as a new class of “smart”, i.e. pH- and thermoresponsive materials. This review article summarizes the synthesis and applications of these materials, obtained from ring-opening of suitable epoxide monomers.

Oxidation-responsive polyether block copolymers lead to non-ionic polymer surfactants with multiple amine N-oxides

Oxidation of tertiary amines leads to multiple amine N-oxide moieties and a highly polar polyether structure. Combination with the apolar poly(propylene oxide) affords unusual surfactants.

Synthesis of alkynyl-functionalized linear and star polyethers by aluminium-catalyzed copolymerization of glycidyl 3-butynyl ether with epichlorohydrin and ethylene oxide

A novel family of alkynyl-functional linear and star polyethers were prepared by the copolymerization of glycidyl 3-butynyl ether, ethylene oxide and epichlorohydrin catalyzed by i-Bu₃Al/H₃PO₄/DBU.

Design and synthesis of thermoresponsive aliphatic polyethers with a tunable phase transition temperature

A comprehensive study of the synthesis and LCST-type thermoresponsive properties of poly(glycidyl ether) homopolymers and their copolymers is described.

pH-Tunable Thermoresponsive PEO-Based Functional Polymers with Pendant Amine Groups

Thermoresponsive polymers exhibiting lower critical solution temperatures (LCSTs) in aqueous solution have garnered considerable attention for the development of smart materials. Herein, we report the synthesis and properties of pH-tunable thermoresponsive poly(ethylene oxide) (PEO)-based functional polymers bearing pendant amine groups with varying cloud points. Well-defined poly(ethylene oxide-co-allyl glycidyl ether) (P(EO-co-AGE)) copolymers were prepared via controlled anionic ring-opening copolymerization of ethylene oxide (EO) with 10 mol % of a functional allyl glycidyl ether (AGE) comonomer. Facile, modular thiol-ene click chemistry was then employed to introduce a library of different aminothiols as side chains to the initial P(EO-co-AGE) copolymer. Depending on the nature of the pendant amine groups (primary amine, dimethylamine, and diethylamine) and the hydrophobicity of the side chains (ethyl, propyl, and hexyl), the cloud points could be tuned from 44-100 °C under different pH conditions. This is the first systematic investigation into the effect of PEO copolymer side chains on cloud point, which opens up the opportunity to make new thermoresponsive polymers for a variety of smart material applications.

Conventional Oxyanionic versus Monomer-Activated Anionic Copolymerization of Ethylene Oxide with Glycidyl Ethers: Striking Differences in Reactivity Ratios

Detailed understanding of the monomer distribution in copolymers is essential to tailor their properties. For the first time, we have been able to utilize in situ ¹H NMR spectroscopy to monitor the monomer-activated anionic ring opening copolymerization (AROP) of ethylene oxide (EO) with a glycidyl ether comonomer, namely, ethoxy ethyl glycidyl ether (EEGE). We determine reactivity ratios and draw a direct comparison to conventional oxyanionic ROP. Surprisingly, the respective monomer reactivities differ strongly between the different types of AROP. Under conventional oxyanionic conditions similar monomer reactivities of EO and EEGE are observed, leading to random structures (r_EO = 1.05 ± 0.02, r_EEGE = 0.94 ± 0.02). Addition of a cation complexing agent (18-crown-6) showed no influence on the relative reactivity of EO and EEGE (r_EO = r_EEGE = 1.00 ± 0.02). In striking contrast, monomer-activated AROP produces very different monomer reactivities, affording strongly tapered copolymer structures (r_EO = 8.00 ± 0.16, r_EEGE = 0.125 ± 0.003). These results highlight the importance of understanding reactivity ratios of comonomer pairs under certain polymerization conditions, at the same time demonstrating the ability to generate both random and strongly tapered P(EO-co-EEGE) polyethers by simple one-pot statistical anionic copolymerization. These observations may be generally valid for the copolymerization of EO and glycidyl ethers.

Recent trends in pH/thermo-responsive self-assembling hydrogels: from polyions to peptide-based polymeric gelators

In this article, we highlight some recent developments in "smart" physical hydrogels achieved by self-assembling of block type macromolecules. More precisely we focus on two interesting types of gelators namely conventional ionic (or ionogenic) block copolymers and peptide-based polymers having as a common feature their responsiveness to pH and/or temperature which are the main triggers used for potential biomedical applications. Taking advantage of the immense skills of conventional block copolymer hydrogelators, namely macromolecular design, self-assembling mechanism, gel rheological properties, responsiveness to various triggers and innovative applications, the development of novel self-assembling gelators, integrating the new knowledge emerging from the peptide-based systems, opens new horizons towards bio-inspired technologies.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

Biodegradable Block Copolyelectrolyte Hydrogels for Tunable Release of Therapeutics and Topical Antimicrobial Skin Treatment

Biodegradable polycarbonate-based ABA triblock copolyelectrolytes were synthesized and formulated into physically cross-linked hydrogels. These biocompatible, cationically, and anionically charged hydrogel materials exhibited pronounced shear-thinning behavior, making them useful for a variety of biomedical applications. For example, we investigated the antimicrobial activity of positively charged thiouronium functionalized hydrogels by microbial growth inhibition assays against several clinically relevant Gram-negative and Gram-positive bacteria. It is noteworthy that these hydrogels exhibited broad spectrum killing efficiencies approaching 100%, thereby rendering these thixotropic materials attractive for treatment of skin and other surface bound infections. Finally, cationic trimethylammonium containing hydrogels and anionic carboxylic acid functionalized hydrogels were utilized to sustain the release of negatively charged (diclofenac) and positively charged (vancomycin) therapeutics, respectively. Collectively, the present work introduces a simple method for formulating charged hydrogel materials that are capable of interacting with various analytes of interest through noncovalent interactions.

Aliphatic Polyethers: Classical Polymers for the 21st Century

Polyethers-polymers with the structural element (R'-O-R)n in their backbone--are an old class of polymers which were already used at the time of the ancient Egyptians. However, still today these materials are highly important with applications in all areas of our life, reaching from the automotive and paper industry to cosmetics and biomedical applications. In this Review, different aliphatic polyethers like poly(epoxide)s, poly(oxetane)s, and poly(tetrahydrofuran) are discussed. Special emphasis is placed on the history, the polymerization techniques (industrially and in academia), the properties, the applications as well as recent developments of these materials.

A robust platform for functional microgels via thiol-ene achemistry with reactive polyether-based nanoparticles

We herein report the development of crosslinked polyether particles as a reactive platform for the preparation of functional microgels. Thiol-ene crosslinking of poly(allyl glycidyl ether) in miniemulsion droplets - stabilized by a surface active, bio-compatible polyethylene glycol block copolymer - resulted in colloidal gels with a PEG corona and an inner polymeric network containing reactive allyl units. The stability of the allyl groups allows the microgels to be purified and stored before a second, subsequent thiol-ene functionalization step allows a wide variety of pH- and chemically-responsive groups to be introduced into the nanoparticles. The facile nature of this synthetic platform enables the preparation of microgel libraries that are responsive to different triggers but are characterized by the same size distribution, surface functionality, and crosslinking density. In addition, the utilization of a crosslinker containing cleavable ester groups renders the resulting hydrogel particles degradable at elevated pH or in the presence of esterase under physiological conditions.

Full pH-range responsive hyperbranched polyethers: synthesis and responsiveness

In order to impart full pH-range responsiveness within biocompatible hyperbranched polyethers, new amphiphilic polyethers, i.e. HPMHO–Amines and HPMHO–Carboxys, which have a molecular structure similar to hyperbranched PEG, were prepared through ring-opening polymerization and modified by amination or carboxylation.