Synthesis and Catalytic Applications of Advanced Sn- and Zr-Zeolites Materials

The incorporation of isolated Sn (IV) and Zr (IV) ions into silica frameworks is attracting widespread attention, which exhibits remarkable catalytic performance (conversion, selectivity, and stability) in a broad range of reactions, especially in the field of biomass catalytic conversion. As a representative example, the conversion route of carbohydrates into valuable platform and commodity chemicals such as lactic acid and alkyl lactates, has already been established. The zeotype materials also possess water-tolerant ability and are capable to be served as promising heterogeneous catalysts for aqueous reactions. Therefore, dozens of Sn- and Zr-containing silica materials with various channel systems have been prepared successfully in the past decades, containing 8 membered rings (MR) small pore CHA zeolite, 10-MR medium pore zeolites (FER, MCM-56, MEL, MFI, MWW), 12-MR large pore zeolites (Beta, BEC, FAU, MOR, MSE, MTW), and 14-MR extra-large pore UTL zeolite. This review about Sn- and Zr-containing metallosilicate materials focuses on their synthesis strategy, catalytic applications for diverse reactions, and the effect of zeolite characteristics on their catalytic performances.

Catalytic Upgrading of Lignocellulosic Biomass Sugars Toward Biofuel 5-Ethoxymethylfurfural

The conversion of biomass into high-value chemicals through biorefineries is a requirement for sustainable development. Lignocellulosic biomass (LCB) contains polysaccharides and aromatic polymers and is one of the important raw materials for biorefineries. Hexose and pentose sugars can be obtained from LCB by effective pretreatment methods, and further converted into high-value chemicals and biofuels, such as 5-hydroxymethylfurfural (HMF), levulinic acid (LA), γ-valerolactone (GVL), ethyl levulinate (EL), and 5-ethoxymethylfurfural (EMF). Among these biofuels, EMF has a high cetane number and superior oxidation stability. This mini-review summarizes the mechanism of several important processes of EMF production from LCB-derived sugars and the research progress of acid catalysts used in this reaction in recent years. The influence of the properties and structures of mono- and bi-functional acid catalysts on the selectivity of EMF from glucose were discussed, and the effect of reaction conditions on the yield of EMF was also introduced.

Catalytic conversion of carbohydrates into 5-ethoxymethylfurfural using γ-AlOOH and CeO2@B2O3 catalyst synergistic effect

Selective catalytic conversion of carbohydrates to 5-ethoxymethylfurfural (EMF) is a critical approach to the biorefinery. In this work, solid acid catalysts of γ-AlOOH and CeO₂@B₂O₃ were used to convert carbohydrates to EMF in a one-pot process, performed in an ethanol/DMSO solvent system. The synergistic effect of γ-AlOOH and CeO₂@B₂O₃ was studied. Furthermore, the morpho-structural properties of the catalysts were characterized, and the effects of reaction time, reaction temperature, catalyst load, and the amount of cosolvent on the conversion of glucose to EMF were examined and optimized. Under the reaction conditions of 170 °C for 20 h, glucose, sucrose, cellobiose, inulin and starch were used as raw materials, and the EMF yield range was 9.2–27.7%. The results showed that the synergistic effect of γ-AlOOH and CeO₂@B₂O₃ further causes the combination of multiple acid sites with different types and strength distributions. Particularly, the collaboration between weak, medium-strong, and strong acid, as well as between Lewis and Brønsted acidity, is of great significance for EMF generation. The reusability experiments showed that the combined catalytic system was easily separated and maintained catalytic activity for five successive reactions without further intermediate regeneration steps. This work provides a promising route for the catalytic conversion of biomass-derived carbohydrates into EMF.

γ-AlOOH and CeO₂@B₂O₃ solid acid catalysts were synthesized for the one-pot selective conversion of carbohydrates into 5-ethoxymethylfurfural under their synergistic catalysis.

Catalytic Synthesis of the Biofuel 5-Ethoxymethylfurfural (EMF) from Biomass Sugars

A new generation of bioplatform molecule 5-ethoxymethylfurfural (EMF) has excellent energy density and combustion performance, which makes it a potential fuel additive. This article reviews the factors that affect the production of EMF from different feedstocks, including platform compounds, monosaccharides, polysaccharides, and raw lignocellulosic biomass. Focus is placed on discussing the catalytic efficiency with pros and cons of different acid catalysts, including homogeneous catalysts (i.e., liquid acids and metal salts), heterogeneous catalysts (i.e., zeolites, heteropolyacid-based hybrids, and SO3H-based catalysts), ionic liquids, mixed acid catalysts, and deep eutectic solvents (DESs). Except for the commonly used ethanol solvent, this review also summarizes the influence of the cosolvent system (e.g., ethanol/dimethylsulfoxide (DMSO), ethanol/tetrahydrofuran (THF), and ethanol/γ-valerolactone (GVL)) on the EMF yield.

Value-Added Bio-Chemicals Commodities from Catalytic Conversion of Biomass Derived Furan-Compounds

The depletion of fossil resources in the near future and the need to decrease greenhouse gas emissions lead to the investigation of using alternative renewable resources as raw materials. One of the most promising options is the conversion of lignocellulosic biomass (like forestry residues) into bioenergy, biofuels and biochemicals. Among these products, the production of intermediate biochemicals has become an important goal since the petrochemical industry needs to find sustainable alternatives. In this way, the chemical industry competitiveness could be improved as bioproducts have a great potential market. Thus, the main objective of this review is to describe the production processes under study (reaction conditions, type of catalysts, solvents, etc.) of some promising intermediate biochemicals, such as; alcohols (1,2,6-hexanetriol, 1,6-hexanetriol and pentanediols (1,2 and 1,5-pentanediol)), maleic anhydride and 5-alkoxymethylfuran. These compounds can be produced using 5-hydroxymethylfurfural and/or furfural, which they both are considered one of the main biomass derived building blocks.

Recent progress in the development of advanced biofuel 5-ethoxymethylfurfural

Biomass-derived 5-ethoxymethylfurfural (EMF) with excellent energy density and satisfactory combustion performance holds great promise to meet the growing demands for transportation fuels and fuel additives to a certain extent. In this review, we summarized the relative merits of the EMF preparation from different feedstocks, such as platform chemicals, biomass sugars and lignocellulosic biomass. Advances for EMF synthesis over homogeneous (i.e. inorganic acids and soluble metal salts), heterogeneous catalysts (i.e. zeolites, heteropolyacid-based hybrids, sulfonic acid-functionalized catalysts, and others) or mixed-acid catalysts were performed as well. Additionally, the emerging development for the EMF production was also evaluated in terms of the different solvents system (i.e. single-phase solvents, biphasic solvents, ionic liquids, and deep eutectic solvents). It is concluded with current challenges and prospects for advanced biofuel EMF preparation in the future.

Subcritical Methanolysis of Starch and Transglycosidation to Produce Dodecyl Polyglucosides

Biosurfactants based on carbohydrates are of special interest because of their production from renewable resources, nontoxicity, biocompatibility, and environmental friendliness. Dodecyl polyglucosides, a type of nonionic surfactant synthesized with methyl polyglucosides obtained from the eco-friendly subcritical methanolysis of renewable resource of starch, is no doubt good for ecosystem. With the subcritical methanolysis of starch, the methyl polyglucosides were obtained without any catalyst. Under the reaction condition of the weight ratio of methanol to starch of 7.5, temperature of 220 °C, and reaction time of 2 h, the yield of methyl polyglucosides was 85%. Dodecyl polyglucosides were synthesized by transglycosidation with methyl polyglucosides, and the green nonionic surfactant has excellent surface activity. The critical micelle concentration and hydrophilic lipophilic balance are 0.022 wt % and 12, respectively.

Adjusting the acidity of sulfonated organocatalyst for the one-pot production of 5-ethoxymethylfurfural from fructose

A novel sulfonated organocatalyst bearing stable double H-bonds shows high catalytic performance and good reusability for the tandem production of 5-ethoxymethylfurfural (EMF), a biofuel candidate, from biomass-derived fructose.

Upgrading of Carbohydrates to the Biofuel Candidate 5-Ethoxymethylfurfural (EMF)

5-Ethoxymethylfurfural (EMF), one of the significant platform molecular derivatives, is regarded as a promising biofuel and additive for diesel, owing to its high energy density (8.7 kWh·L−1). Several catalytic materials have been developed for the synthesis of EMF derived from different feedstocks under relatively mild reaction conditions. Although a great quantity of research has been conducted over the past decades, the unsatisfactory production selectivity mostly limited to the range 50%–70%, and the classic fructose used as the substrate restricted its application for fuel manufacture in large scale. To address these production improvements, this review pays attention to evaluate the activity of various catalysts (e.g., mineral salts, zeolites, heteropolyacid-based hybrids, sulfonic acid-functionalized materials, and ionic liquids), providing potential research directions for the design of novel catalysts for the achievement of further improved EMF yields.

Dehydration of glucose to 5-hydroxymethylfurfural and 5-ethoxymethylfurfural by combining Lewis and Brønsted acid

In this work, glucose was transformed into 5-hydroxymethylfurfural (HMF) and 5-ethoxymethylfurfural (EMF) in the presence of AlCl₃·6H₂O and a Brønsted solid acid catalyst (PTSA–POM).

One-Pot Conversion of Carbohydrates into Furan Derivatives via Furfural and 5-Hydroxylmethylfurfural as Intermediates

Recently, there has been growing interest in the transformation of renewable biomass into value-added fuels and chemicals. The catalytic conversion of naturally abundant carbohydrates can generate two-important furan chemicals: 5-hydroxymethylfurfural (HMF) from C6 carbohydrates and furfural from C5 carbohydrates. Both HMF and furfural have received great interest as precursors in the synthesis of commodity chemicals and liquid fuels. In recent years, a trend has emerged to integrate sequential catalytic processes involving multistep reactions for the direct one-pot transformation of carbohydrates into the aimed fuels and chemicals. One-pot reactions have remarkably unique and environmentally friendly benefits, including the fact that isolation and purification of intermediate compounds can be avoided. Herein, the present article aims to review recent advances in the one-pot conversion of carbohydrates into furan derivatives via furfural and HMF as intermediates. Special attention will be paid to the catalytic systems, mechanistic insight, reaction pathways, and catalyst stability. It is expected that this review will guide researchers to develop effective catalytic systems for the one-pot transformation of carbohydrates into furan derivatives.

Phosphoric acid doped polybenzimidazole as an heterogeneous catalyst for selective and efficient dehydration of saccharides to 5-hydroxymethylfurfural

PA–PBI was used as an heterogeneous catalyst for the dehydration of high fructose concentration to produce HMF with high selectivity.

Copper-zinc alloy nanopowder: a robust precious-metal-free catalyst for the conversion of 5-hydroxymethylfurfural

Noble-metal-free copper-zinc nanoalloy (<150 nm) is found to be uniquely suited for the highly selective catalytic conversion of 5-hydroxymethylfurfural (HMF) to potential biofuels or chemical building blocks. Clean mixtures of 2,5-dimethylfuran (DMF) and 2,5-dimethyltetrahydrofuran (DMTHF) with combined product yields up to 97 % were obtained at 200-220 °C using 20-30 bar H2 . It is also possible to convert 10 wt % HMF solutions in CPME, with an excellent DMF yield of 90 %. Milder temperatures favor selective (95 %) formation of 2,5-furandimethanol (FDM). The one-pot conversion of fructose to valuable furan-ethers was also explored. Recycling experiments for DMF production show remarkable catalyst stability. Transmission electron microscopy (TEM) characterization provides more insight into morphological changes of this intriguing class of materials during catalysis.

Conversion of glucose into 5-hydroxymethylfurfural catalyzed by chromium(iii) Schiff base complexes and acidic ionic liquids immobilized on mesoporous silica

A series of novel catalysts were synthesized using immobilized chromium(iii) complexes and ionic liquids on the surface of MCM-41.

One-step method to produce methyl-d-glucoside from lignocellulosic biomass

One-step acid-catalyzed methanolysis of bamboo biomass for the preparation of methyl-d-glucoside as high value-added chemicals.

Iron oxide encapsulated by ruthenium hydroxyapatite as heterogeneous catalyst for the synthesis of 2,5-diformylfuran

Magnetic γ-Fe2 O3 nanocrystallites encapsulated by hydroxyapatite (HAP), HAP@γ-Fe2 O3 , were prepared followed by cation exchange of Ca(2+) on the external HAP surface with Ru(3+) to give the γ-Fe2 O3 @HAP-Ru catalyst. The structure of the as-prepared catalyst was characterized, and its catalytic activity was studied in the aerobic oxidation of 5-hydroxymethylfurfural (HMF). γ-Fe2 O3 @HAP-Ru showed a high catalytic activity for the aerobic oxidation of HMF into 2,5-diformylfuran (DFF). A high DFF yield of 89.1 % with an HMF conversion of 100% was obtained after 4 h at 90 °C. Importantly, the synthesis of DFF from fructose was realized by two consecutive steps. The dehydration of fructose in the presence of a magnetic acid catalyst (Fe3 O4 @SiO2-SO3 H) produced HMF in a yield of 90.1%. Then the Fe3 O4 @SiO2 SO3 H catalyst was removed from the reaction solution with a permanent magnet, and HMF in the resulting solution was further oxidized to DFF with a yield of 79.1% based on fructose. The synthesis of DFF from fructose by two steps avoids the tedious separation of the intermediate HMF, which saves time and energy.

Efficient conversion of cellulose into biofuel precursor 5-hydroxymethylfurfural in dimethyl sulfoxide-ionic liquid mixtures

In recent years, cellulose has received increasing attention as a potential material for the production of biofuels and bio-based chemicals. In this study, a new process for the efficient conversion of cellulose into 5-hydroxymethylfurfural (HMF) was developed by the use of AlCl3 as the catalyst in DMSO-ionic liquid ([BMIM]Cl) mixtures. Various reaction parameters such as reaction time, reaction temperature, solvent and catalyst dosage were investigated in detail. A high HMF yield of 54.9% was obtained from cellulose at 150°C after 9h in a mixed solvent of DMSO-[BMIM]Cl (10 wt.%). More importantly, the catalytic system could be reused for several times despite of the slight loss of its catalytic activity.

Catalytic Cascade Dehydration-Etherification of Fructose into 5-Ethoxymethylfurfural with SO3H-Functionalized Polymers

A series of SO3H-functionalized polymers were prepared and employed as heterogeneous catalysts for one-pot transformation of fructose into 5-ethoxymethylfurfural (EMF) that is considered to be one of potential liquid biofuels. A high EMF yield of 72.8% could be obtained at 110°C for 10 h, and the polymeric acid catalysts could be recycled for five times without significant loss of catalytic performance.