Hybrid gold-silica nanoparticles for plasmonic applications: A comparison study of synthesis methods for increasing gold coverage

The current work focuses on the synthesis of hybrid nanoparticles (NPs) made of a silica core (Si NPs) coated with discrete gold nanoparticles (Au NPs), which exhibit localized surface plasmon resonance (LSPR) properties. This plasmonic effect is directly related to the nanoparticles size and arrangement. In this paper, we explore a wide range of size for the silica cores (80, 150, 400, and 600 nm) and for the gold NPs (8, 10, and 30 nm). Some rational comparison between different functionalization techniques and different synthesis methods for the Au NPs are proposed, related to the optical properties and colloidal stability in time. An optimized, robust and reliable synthesis route is established, which improves the gold density and homogeneity. The performances of these hybrid nanoparticles are evaluated in order to be used in the shape of a dense layer for pollutant detection in gas or liquids, and find numerous applications as a cheap and new optical device.

One-Pot Synthesis of Customized Metal-Phenolic-Network-Coated AIE Dots for In Vivo Bioimaging

The integration of aggregation-induced emission luminogens (AIEgens) and inorganic constituents to generate multifunctional nanocomposites has attracted much attention because it couples the bright aggregate-state fluorescence of AIEgens with the diverse imaging modalities of inorganic constituents. Herein, a facile and universal strategy to prepare metal-phenolic-network (MPN)-coated AIE dots in a high encapsulation efficiency is reported. Through precise control on the nucleation of AIEgens and deposition of MPNs in tetrahydrofuran/water mixtures, termed as coacervation, core-shell MPN-coated AIE dots with bright emission are assembled in a one-pot fashion. The optical properties of MPN-coated AIE dots can be readily tuned by varying the incorporated AIEgens. Different metal ions, such as Fe³⁺ , Ti⁴⁺ , Cu²⁺ , Ni²⁺ , can be introduced to the nanoparticles. The MPN-coated AIE dots with a red-emissive AIEgen core are successfully used to perform magnetic resonance/fluorescence dual-modality imaging in a tumor-bearing mouse model and blood flow visualization in a zebrafish larva. It is believed that the present study provides a tailor-made nanoplatform to meet the individual needs of in vivo bioimaging.

Improving the stability of plasmonic magnesium nanoparticles in aqueous media

This work describes two different core-shell architectures based on Mg nanoparticles (NPs) synthesised in order to improve Mg's stability in aqueous solutions. The shell thickness in Mg-polydopamine NPs can be modulated from 5 to >50 nm by ending the polymerization at different times; the resulting structures stabilize the metallic, plasmonic core in water for well over an hour. Mg-silica NPs with shells ranging from 5 to 30 nm can also be prepared via a modified Stöber procedure and they retain optical properties in 5% water-in-isopropanol solutions. These new architectures allow Mg nanoplasmonics to be investigated as an alternative to Ag and Au in a broader range of experimental conditions for a rich variety of applications.

Shapes, Plasmonic Properties, and Reactivity of Magnesium Nanoparticles

Localized surface plasmon resonances have attracted much attention due to their ability to enhance light-matter interactions and manipulate light at the subwavelength level. Recently, alternatives to the rare and expensive noble metals Ag and Au have been sought for more sustainable and large-scale plasmonic utilization. Mg supports plasmon resonances, is one of the most abundant elements in earth's crust, and is fully biocompatible, making it an attractive framework for plasmonics. This feature article first reports the hexagonal, folded, and kite-like shapes expected theoretically from a modified Wulff construction for single crystal and twinned Mg structures and describes their excellent match with experimental results. Then, the optical response of Mg nanoparticles is overviewed, highlighting Mg's ability to sustain localized surface plasmon resonances across the ultraviolet, visible, and near-infrared electromagnetic ranges. The various resonant modes of hexagons, leading to the highly localized electric field characteristic of plasmonic behavior, are presented numerically and experimentally. The evolution of these modes and the associated field from hexagons to the lower symmetry folded structures is then probed, again by matching simulations, optical, and electron spectroscopy data. Lastly, results demonstrating the opportunities and challenges related to the high chemical reactivity of Mg are discussed, including surface oxide formation and galvanic replacement as a synthetic tool for bimetallics. This Feature Article concludes with a summary of the next steps, open questions, and future directions in the field of Mg nanoplasmonics.

Facile Synthesis of Monodispersed Ag NPs in Ethylene Glycol Using Mixed Capping Agents

Capping agents play an important role in the synthesis of silver nanostructures in polyol solvents. In this work, we demonstrate that using a small amount of tannic acid (TA), a reducing capping agent, in addition to poly(vinylpyrrolidone) (PVP), a protective capping agent, can lead to the production of monodisperse spherical silver nanoparticles (Ag NPs) that are stable with respect to particle aggregation for at least 100 days and have particle sizes ranging from 16 to 28 nm depending on the TA concentration. We hypothesize that the complexation between PVP and TA can lead to the formation of a stable particle coating and a fast Ag⁺ reduction rate at a relatively high TA concentration. Both effects can benefit the formation of small spherical Ag NPs with narrow size distribution.

Versatile Macroscale Concentration Gradients of Nanoparticles in Soft Nanocomposites

Nanocomposite materials benefit from the diverse physicochemical properties featured by nanoparticles, and the presence of nanoparticle concentration gradients can lend functions to macroscopic materials beyond the realm of classical nanocomposites. It is shown here that linearity and time-shift invariance obtained via the synergism of two independent physical phenomena-translational self-diffusion and shear-driven dispersion-may give access to an exceptionally high degree of flexibility in the design of scalable and programmable long-range concentration gradients of nanoparticles in solidifiable liquid matrices.

Enhanced control of plasmonic properties of silver–gold hollow nanoparticles via a reduction-assisted galvanic replacement approach

Hollow noble metal nanoparticles are of growing interest due to their localized surface plasmon resonance (LSPR) tunability. A popular synthetic approach is galvanic replacement which can be coupled with a co-reducer. Here, we describe the control over morphology, and therefore over plasmonic properties including energy, bandwidth, extinction and scattering intensity, offered by co-reduction galvanic replacement. This study indicates that whereas the variation of atomic stoichiometry using the co-reduction method described in this work offers a rather modest tuning range of LSPR energy when compared to traditional galvanic replacement, it nevertheless has a profound effect on shell thickness, which imparts a degree of control over scattering intensity and sensitivity to changes in the dielectric constant of the surrounding environment. Therefore, in this context particle size and gold content become two design parameters that can be used to independently tune LSPR energy and intensity.

A co-reduction assisted method for the synthesis of Ag–Au hollow nanoparticles with enhanced control over plasmon wavelength and scattering intensity.

Control of the Size of Silver Nanoparticles and Release of Silver in Heat Treated SiO₂-Ag Composite Powders

The growth of silver nanoparticles, the activation energy for silver particle growth, and the release of silver species in heat treated SiO2-Ag composite powders are investigated. The silver particle growth is controlled by heat treatment for 75 min of the as-synthesized SiO2-Ag composite powder at 300–800 °C. During heat treatment the mean size of the Ag particles increases from 10 nm up to 61 nm with increasing temperature, however, the particle size distribution widens and the mean size increases with increasing heat treatment temperature. Based on X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) studies, silver particles are crystalline and in a metallic state after annealing in all SiO2-Ag composite powders. The growth of Ag particles is suggested to take place via diffusion and Ostwald ripening. The activation energy for particle growth was determined as 0.14 eV. The dissolution of silver in aqueous solutions from the SiO2-Ag composites heat treated, at 300 °C, 600 °C, and 700 °C, was investigated by varying pH and temperature. The dissolution was reduced in all conditions with increasing silver particle size, i.e., when the total surface area of Ag particles is reduced. It is suggested that the dissolution of silver from the composite powders can conveniently be adjusted by controlling the Ag particle size by the heat treatment of the composite powder.

Tannic Acid/Fe3+/Ag Nanofilm Exhibiting Superior Photodynamic and Physical Antibacterial Activity

Silver nanoparticles (AgNPs) enwrapped in the biologically safe tannic acid (TA)/Fe³⁺ nanofilm are synthesized by an ultrafast, green, simple, and universal method. The physical antibacterial activity and photodynamic antibacterial therapy (PAT) efficacy of the TA/Fe³⁺/AgNPs nanofilm were investigated for the first time, which exhibited a strong physical antibacterial activity as well as great biocompatibility, through in vitro and in vivo studies. The results disclosed that this hybrid coating could possess high PAT capabilities upon irradiation under a visible light of 660 nm, which is longer than those of previously reported green and blue sensitization light, thus allowing deeper light penetration into biological tissues. Electron spin resonance (ESR) spectra proved that the PAT efficacy of the TA/Fe³⁺/AgNPs nanofilm was associated with the yields of singlet oxygen (¹O₂) under the irradiation of visible light (660 nm). A higher PAT efficiency of 100 and 94% against Escherichia coli and Staphylococcus aureus could be achieved within 20 min of illumination under 660 nm visible light, whereas the innate physical antibacterial activity of AgNPs could endow the implants with long-term prevention of bacterial infection. The mechanism of PAT may be associated with the formation of oxidative stress and oxidative damage to key biomolecules (proteins and lipids) in bacteria. Our results reveal that the synergistic action of both PAT and physical action of AgNPs in this hybrid nanofilm is an effective way to inactivate bacteria, with minimal side effects.

The role of tannic acid and sodium citrate in the synthesis of silver nanoparticles

We describe herein the significance of a sodium citrate and tannic acid mixture in the synthesis of spherical silver nanoparticles (AgNPs). Monodisperse AgNPs were synthesized via reduction of silver nitrate using a mixture of two chemical agents: sodium citrate and tannic acid. The shape, size and size distribution of silver particles were determined by UV-Vis spectroscopy, dynamic light scattering (DLS) and scanning transmission electron microscopy (STEM). Special attention is given to understanding and experimentally confirming the exact role of the reagents (sodium citrate and tannic acid present in the reaction mixture) in AgNP synthesis. The oxidation and reduction potentials of silver, tannic acid and sodium citrate in their mixtures were determined using cyclic voltammetry. Possible structures of tannic acid and its adducts with citric acid were investigated in aqueous solution by performing computer simulations in conjunction with the semi-empirical PM7 method. The lowest energy structures found from the preliminary conformational search are shown, and the strength of the interaction between the two molecules was calculated. The compounds present on the surface of the AgNPs were identified using FT-IR spectroscopy, and the results are compared with the IR spectrum of tannic acid theoretically calculated using PM6 and PM7 methods. The obtained results clearly indicate that the combined use of sodium citrate and tannic acid produces monodisperse spherical AgNPs, as it allows control of the nucleation, growth and stabilization of the synthesis process. Graphical abstractᅟ.

Fabrication of Conductive Silver Microtubes Using Natural Catkin as a Template

Catkin, a natural hollow fiber, is used as a template to fabricate light, flexible, and electrically conductive silver microtubes with a high aspect ratio. The template is functionalized with tannic acid (TA)-Fe coordination complexes. Because of the metal ion chelating ability and reducibility of TA, silver nanoparticles (Ag NPs) can be formed in situ on the fiber's surface. The as-formed Ag NPs can act as nucleation sites in subsequent electroless silver plating, leading to the formation of a compact and uniform silver coating on the microtube. The coating is constructed by densely packed Ag NPs of only 15 ± 5 nm in diameter. Because of the tight accumulation and small size of the Ag NPs, the resulting silver-coated microtubes, without any post-treatment, show an electrical resistivity of 1500 mΩ·cm at a bulk density of 0.6 g·cm^-3. We find that the in situ formed nucleation sites and the stirring speed in the electroless plating play important roles in the formation of a silver coating with a high electrical conductivity. This method may be extended to fabricate conductive nanocoatings on other substrates.

Quantifying the Sensitivity of Multipolar (Dipolar, Quadrupolar, and Octapolar) Surface Plasmon Resonances in Silver Nanoparticles: The Effect of Size, Composition, and Surface Coating

The effect of composition, size, and surface coating on the sensitivity of localized multipolar surface plasmon resonances has been spectroscopically investigated in high-quality silver colloidal solutions with precisely controlled sizes from 10 to 220 nm and well-defined surface chemistry. Surface plasmon resonance modes have been intensively characterized, identifying the size-dependence of dipolar, quadrupolar, and octapolar modes. Modifications of the NP's surface chemistry revealed the higher sensitivity of large sizes, long molecules, thiol groups, and low-order resonance modes. We also extend this study to gold nanoparticles, aiming to compare the sensitivity of both materials, quantifying the higher sensitivity of silver.

Hydrophobization of silver nanoparticles through surface-initiated atom transfer radical polymerization

Poly(methyl methacrylate) (PMMA)-coated Ag@SiO₂core–shell particles with enhanced dispersibility in non-polar solvents were synthesized by surface-initiated atom transfer radical polymerization.

A one-step short-time synthesis of Ag@SiO2 core-shell nanoparticles

A performance of shell-thickness precise control in silver-silica coating core-shell nanoparticles is presented. 60nm sized citrate-stabilized silver nanoparticles are directly silica coated using a modified Stöber process. Tetraethyl orthosilicate is used as a silica precursor and ammonium hydroxide as catalyst in an alcoholic solvent to promote the seeded silica growth. By simply varying the synthesis reaction time from 4 to 60min, the silica shell thickness is increased from 5.1nm to 76.4nm. This well-controlled synthesis is then transposed to 40, 80 and 100nm sized silver cores in order to show the independence of the silica shell growth on the nanoparticle core size. Optical properties, i.e. localized surface plasmon resonance, of the produced silver-silica core-shell are also investigated.

A new facile strategy for higher loading of silver nanoparticles onto silica for efficient catalytic reduction of 4-nitrophenol

The facile route to higher loading of silver nanoparticles onto a silica support is useful for large-scale synthesis of efficient silver supported catalysts.

Improved Raman and photoluminescence sensitivity achieved using bifunctional Ag@SiO2 nanocubes

Surface-enhanced Raman scattering (SERS) and metal-enhanced photoluminescence (MEPL) responses can be greatly improved by introducing a thin coating of silica (SiO₂) on silver nanocubes.

Encapsulation of anticancer drug by hydrogen-bonded multilayers of tannic acid

Tannic acid (TA)-based multilayer assemblies have attracted increasing interest for biomedical applications. Here we explore properties of TA-poly(N-vinylpyrrolidone) (TA-PVPON) hydrogen-bonded multilayers for drug encapsulation and long-term storage. We demonstrate that the small molecular weight anticancer drug, doxorubicin (DOX), can be successfully loaded into (TA-PVPON) capsules with high encapsulation efficiency. We have also found that the encapsulated DOX can be efficiently stored inside the capsules for the pH range from pH = 7.4 to pH = 5. We show that the chemical and functional stability of TA at neutral and basic pH values is achieved through complexation with PVPON. The UV-vis spectrophotometry and in situ ellipsometry analyses of the hydrogen bonding interactions between TA and PVPON at different pH values reveal pH-dependent behavior of TA-PVPON capsules for the pH range from pH = 7.4 to pH = 5. Increasing deposition pH value from pH = 5 to pH = 7.4 leads to a 2-fold decrease in capsule thickness. However, this trend is reversed when salt concentration of the deposition solutions is increased from 0.01 M to 0.1 M NaCl. We have also demonstrated that the permeability of (TA-PVPON) capsules prepared using low salt deposition conditions and pH = 7.4 can be increased 2-fold by exposure of the capsules to 0.1 M NaCl salt solutions at the same pH. Our work opens new perspectives for design of novel polymer carriers for controlled drug delivery in cancer therapy.

Metal-Enhanced Fluorescence and FRET in Multilayer Core-Shell Nanoparticles

In recent years, various methods for the synthesis of fluorescent core-shell nanostructures were developed, optimized, and studied thoroughly in our research group. Metallic cores exhibiting plasmonic properties in the UV and visible regions of the electromagnetic spectrum were used to increase substantially the brightness and stability of organic fluorophores encapsulated in silica shells. Furthermore, the efficiency and range of Förster resonant energy transfer (FRET) between donor and acceptor molecules located in the vicinity of the metallic core was shown to be enhanced. Such multilayer nanoparticle architectures offer, in addition to the aforementioned advantages, excellent chemical and physical stability, solubility in aqueous media, low toxicity, and high detectability. In view of these enviable characteristics, a plethora of applications have been envisioned in biology, analytical chemistry, and medical diagnostics. In this paper, advances in the development of multilayer core-shell luminescent nanoparticle structures and selected applications to bioanalytical chemistry will be described.

Noble metal nanoparticle@metal oxide core/yolk-shell nanostructures as catalysts: recent progress and perspective

Controllable integration of noble metals (e.g., Au, Ag, Pt, and Pd) and metal oxides (e.g., TiO₂, CeO₂, and ZrO₂) into single nanostructures has attracted immense research interest in heterogeneous catalysis, because they not only combine the properties of both noble metals and metal oxides, but also bring unique collective and synergetic functions in comparison with single-component materials. Among many strategies recently developed, one of the most efficient ways is to encapsulate and protect individual noble metal nanoparticles by a metal oxide shell of a certain thickness to generate the core-shell or yolk-shell structure, which exhibits enhanced catalytic performance compared with conventional supported catalysts. In this review article, we summarize the state-of-the art progress in synthesis and catalytic application of noble metal nanoparticle@metal oxide core/yolk-shell nanostructures. We hope that this review will help the readers to obtain better insight into the design and application of well-defined nanocomposites in both the energy and environmental fields.

Reviewing the Tannic Acid Mediated Synthesis of Metal Nanoparticles

Metal nanoparticles harbour numerous exceptional physiochemical properties absolutely different from those of bulk metal as a function of their extremely small size and large superficial area to volume. Naked metal nanoparticles are synthesized by various physical and chemical methods. Chemical methods involving metal salt reduction in solution enjoy an extra edge over other protocols owing to their relative facileness and capability of controlling particle size along with the attribute of surface tailoring. Although chemical methods are the easiest, they are marred by the use of hazardous chemicals such as borohydrides. This has led to inclination of scientific community towards eco-friendly agents for the reduction of metal salts to form nanoparticles. Tannic acid, a plant derived polyphenolic compound, is one such agent which embodies characteristics of being harmless and environmentally friendly combined with being a good reducing and stabilizing agent. In this review, first various methods used to prepare metal nanoparticles are highlighted and further tannic acid mediated synthesis of metal nanoparticles is emphasized. This review brings forth the most recent findings on this issue.

Supported core–shell nanobiosensors for quantitative fluorescence imaging of extracellular pH

“Click” chemistry was used to functionalize silica substrates with pH-sensitive nanoparticles, thus producing uniform and highly luminescent ion-sensitive surfaces for quantitative and spatially-resolved extracellular measurements on live cells.