Highly dispersed noble metal nanoparticle composites on biomass-derived carbon-based carriers: synthesis, characterization, and catalytic applications

Precious metal nanoparticles have been widely investigated due to their excellent activity shown in catalysis and sensing. However, how to prepare highly dispersed noble metal nanoparticles to improve the lifetime of catalysts and reduce the cost is still an urgent problem to be solved. In this study, a carbon-based carrier material was prepared by an expansion method and loaded with Pd or Ag nanoparticles on this carbon material to synthesize precious metal nanoparticle composites, which were characterized in detail. The results show that the nanoparticles prepared using this method exhibit superior dispersion. Under the synergistic effect of noble metal nanoparticles and porous carbon carriers, the composites exhibited excellent catalytic degradation of p-nitrophenol and showed excellent sensing performance in the modified hydrogen peroxide sensor electrode. This approach is highly informative for the preparation of nanocomposites in medical and environmental fields.

Fabrication of nano-sized Pd catalyst supported on sodium carboxymethyl cellulose/gum Arabic/sodium alginate functionalized microspheres for catalytic reduction of nitro compounds, organic dyes, K3[Fe(CN)6], and chromium(VI) pollutants

The rapid development of industrialization and urbanization, along with the increasing human population, has led to serious water pollution. Among water pollutants, organic and inorganic pollutants cause serious problems for both the environment and human health due to their toxicity and carcinogenic properties. One of the best ways to eliminate these pollutants is to develop eco-friendly, efficient, and long-life catalysts. For this purpose, in this study, environmentally friendly microspheres containing sodium alginate (SA), sodium carboxymethyl cellulose (Na-CMC), and gum Arabic (GA) were fabricated as potential stabilizers (SA/Na-CMC/GA). Subsequently, newly heterogeneous catalyst system was designed by immobilizing Pd nanoparticles on them and characterized (Pd@SA/Na-CMC/GA). The catalytic reduction ability of Pd@SA/Na-CMC/GA was then investigated against the reduction of 4-nitroaniline (4-NA), 4-nitrophenol (4-NP), 2-nitroaniline (2-NA), 4-nitro-o-phenylenediamine (4-NPDA), methylene blue (MB), methyl orange (MO), Rodamin B (RhB), potassium hexacyanoferrate(III) (K3[Fe(CN)6]), and hexavalent chromium (Cr(VI)) using NaBH4. The Pd@SA/Na-CMC/GA effectively catalyzed these contaminants in a short period of time under mild reaction conditions. As a result of the performed kinetics studies, rate constants were found to be 0.009 s-1, 0.016 s-1, 0.027 s-1, 0.018 s-1, 0.043 s-1, 0.058 s-1, 0.038 s-1 and 0.041 s-1 for the reduction of 4-NP, 2-NA, 4-NA, 4-NPDA, MO, RhB, K3[Fe(CN)6], and Cr(VI), respectively. Additionally, MO was immediately reduced by Pd@SA/Na-CMC/GA. The microsphere nature of Pd@SA/Na-CMC/GA allowed for easy recovery through simple filtration and successful reuse for up to six cycles.

Pd nanoparticles embedded in nanolignin (Pd@LNP) as a water dispersible catalytic nanoreactor for Cr(VI), 4-nitrophenol reduction and CC coupling reactions

The use of water-dispersible and sustainable Pd nanocatalysts to reduce toxic heavy metal ions and catalyze important organic reactions has profound significance for the environmental remediation and the catalytic industry. In this work, a novel water-dispersible and recyclable Pd@LNPs nanoreactor composed of Pd nanoparticle cluster core and LNPs shell was developed in microwave reactor in aqueous solution. It turned out that Pd nanoparticles grew uniformly and stably inside LNPs nanosphere due to the coordinated binding and interaction between Pd and the functional groups in LNPs, which was significantly different from surface loading. The green and biodegradable LNPs nanospheres are not only used as reducing agents for Pd (II) and nanocarriers, but also act as individual nanocontainers to provide favorable sites for reactions and effectively control the entry and release of reactants and products. Furthermore, the excellent and efficient catalytic properties of Pd@LNPs were exhibited by CC coupling reactions and the reduction of Cr(VI) and 4-nitrophenol. The Pd@LNPs prepared in this study have the advantages of excellent dispersion, great recyclability, high turnover frequency and better green sustainability metrics. It will have a great significance for the development of the potential high-value of lignin and the progress in the field of bio-nanocatalysts.

Novel, Biosynthesis of Palladium Nanoparticles using Strychnos Potatorum Polysaccharide as a Green sustainable approach; and their effective Catalytic Hydrogenation of 4-Nitrophenol

In the current study, we successfully used strychnos potatorum polysaccharide through autoclaving to synthesize palladium nanoparticles in a green, sustainable process. These polysaccharide act as a stabilizing, capping, and reducing agent. It also used various analytical characterizations, including UV-Visible spectroscopy, FT-IR spectroscopy, X-Ray diffraction (XRD), Scanning electron microscopy (FE-SEM), EDAX, and X-ray photoelectron spectroscopy (XPS), TEM and gel permeation chromatography (GPC) are used to analyze biosynthesized pallidum nanoparticles (PdNPs). The surface plasmon resonance (SPR) band at 276 nm and UV-visible spectroscopy revealed the presence of the generated PdNPs. The XRD data show that PdNPs have crystalline behavior and a pristine face-centered cubic (FCC) structure. The PdNPs were successfully developed by catalytic reduction of 4-nitrophenol (4-NP). The catalytic activity and reusability of the environmentally friendly PdNPs catalyst were demonstrated by achieving a remarkable transformation of 95 % nitrophenol to 4-aminophenol after five cycles. The reaction rate constant (k) for the degradation of 4-nitrophenol (4-NP) using SP-PdNPs as a catalyst is 0.1201 min-1 and R2 0.9867, with a normalized rate constant of (Knor = K/m) of 7.206 s-1 mM-1. These findings provide fundamental knowledge of the catalytic process governing the hydrogenation of p-nitrophenol, which will help designers of effective catalysts. An innovative and affordable technique for creating PdNPs that are environmentally acceptable and can be utilized as effective catalysts in environmental applications is the use of strychnos potatorum gum polysaccharide. The green-synthesized PdNPs can be used for pollutant remediation, including pharmaceutical, domestic, heavy metal, industrial, and pesticide pollutants.

One-Pot Synthesis of Ultra-Small Pt Nanoparticles-Loaded Nitrogen-Doped Mesoporous Carbon Nanotube for Efficient Catalytic Reaction

In this study, Pt nanoparticles-loaded nitrogen-doped mesoporous carbon nanotube (Pt/NMCT) was successfully synthesized through a polydopamine-mediated "one-pot" co-deposition strategy. The Pt source was introduced during the co-deposition of polydopamine and silica on the surface of SiO2 nanowire (SiO2 NW), and Pt atoms were fixed in the skeleton by the chelation of polydopamine. Thus, in the subsequent calcination process in nitrogen atmosphere, the growth and agglomeration of Pt nanoparticles were effectively restricted, achieving the in situ loading of uniformly dispersed, ultra-small (~2 nm) Pt nanoparticles. The method is mild, convenient, and does not require additional surfactants, reducing agents, or stabilizers. At the same time, the use of the dual silica templates (SiO2 NW and the co-deposited silica nanoclusters) brought about a hierarchical pore structure with a high specific surface area (620 m2 g-1) and a large pore volume (1.46 cm3 g-1). The loading process of Pt was studied by analyzing the electron microscope and X-ray photoelectron spectroscopy of the intermediate products. The catalytic performance of Pt/NMCT was investigated in the reduction of 4-nitrophenol. The Pt/NMCT with a hierarchical pore structure had an apparent reaction rate constant of 0.184 min-1, significantly higher than that of the sample, without the removal of the silica templates to generate the hierarchical porosity (0.017 min-1). This work provides an outstanding contribution to the design of supported noble metal catalysts and also highlights the importance of the hierarchical pore structure for catalytic activity.

Amine-functionalized reduced graphene oxide-supported silver nanoparticles for superior catalytic reduction of organic pollutants

In this work, a simple and environmentally friendly approach has been followed to synthesize amine-functionalized reduced graphene oxide (RGO)-supported silver nanoparticle (AgNPs) having superior catalytic efficiency towards the reduction of organic pollutants. RGO/AgNPs nanohybrid was synthesized by a one-pot hydrothermal reduction of silver nitrate in the presence of amino-propyl trimethoxy silane (APTMS)-functionalized graphene oxide (GO) nanosheets. The structural and morphological characterization of as-synthesized RGO/AgNPs nanohybrid was done by using XRD, SEM, TEM, FT-IR, and Raman spectroscopy techniques. APTMS plays an important role in controlling the size of anchored AgNPs on the nanohybrid in the present study. The -NH2 groups on the surface of APTMS-modified GO function as effective and well-organized nucleation centers facilitating uniform growth of discrete and smaller-sized spherical AgNPs on the surface of RGO nanosheets. In the absence of APTMS, the nanohybrid comprised of bigger-sized AgNPs with few hundred of nanometers in dimension. The catalytic efficiency of RGO/AgNPs nanohybrid was evaluated for the reduction of two model organic pollutants: 4-nitrophenol (4-NP) and methylene blue (MB). Due to the synergistic effects of RGO, APTMS, and Ag components, RGO/AgNPs nanohybrid developed in the present study exhibited superior catalytic activity towards the reduction of 4-NP and MB in comparison with previously reported graphene/graphene oxide/reduced graphene oxide-supported AgNPs catalysts. The catalytic reduction of 4-NP and MB followed pseudo-unimolecular kinetics and the rate constants were found to be 18.83 × 10-3 s-1 and 131.5 ×10-3 s-1 respectively for 4-NP and MB. Furthermore, RGO/AgNPs nanohybrid showed admirable recyclability with negligible loss in its activity until five recycle runs. The superior catalytic activity, favorable kinetic parameters, and sustained catalytic efficiency after recycling make RGO/AgNPs nanohybrid a promising catalyst for the reduction of organic pollutants in environmental remediation.

Pd nanoparticles decorated on Schiff base-modified chitosan/CeO2 as a heterogeneous and retriable nanocatalyst for Heck reactions and remediation of environmental pollutants

In this paper, we have developed a novel, highly active, eco-friendly, and versatile heterogeneous catalyst system in which Pd nanoparticles are decorated on Schiff base-modified chitosan‑cerium oxide particles (Pd@CS-CeO₂). In order to confirm the successful fabrication of Pd@CS-CeO₂, FTIR, XRD, SEM, TEM, BET, TG/DTG, and EDS analyses were performed, and its performance was evaluated as a heterogeneous nanocatalyst in Heck coupling reaction and reduction of nitro compounds. The catalytic tests showed that the desired Heck products were readily produced by Pd@CS-CeO₂ without being contaminated with the aryl iodides, bromides, and chlorides. Moreover, different nitro compounds were efficiently reduced to corresponding amino compounds by Pd@CS-CeO₂ within 95-160 s. Thanks to the heterogeneous nature of Pd@CS-CeO₂ catalyst, it was easily recovered via simple filtration and reused up to 5 successive runs by giving 88 % yield. Due to its good catalytic and reusability performance together with stability/durability, Pd@CS-CeO₂ is promising candidate as a catalyst for various catalytic or organic reactions.

Nano-sized and microporous palladium catalyst supported on modified chitosan/cigarette butt composite for treatment of environmental contaminants

This study reports a versatile process for the fabrication of a microporous heterogeneous palladium nanocatalyst on a novel spherical, biodegradable, and chemically/physically resistant catalyst support consisting of chitosan (CS) and cigarette waste-derived activated carbon (CAC). The physicochemical properties of the microporous Pd-CS-CAC nanocatalyst developed were successfully determined by FTIR, XRD, FE-SEM, TEM, BET, and EDS techniques. TEM studies showed that the average particle size of the synthesized Pd NPs was about 30 nm. The catalytic prowess of microporous Pd-CS-CAC was evaluated in the reduction/decolorization of various nitroarenes (2-nitroaniline (2-NA), 4-nitroaniline (4-NA), 4-nitrophenol (4-NP), and 4-nitro-o-phenylenediamine (4-NPD)) and organic dyes (methyl red (MR), methyl orange (MO), methylene blue (MB), congo red (CR), and rhodamine B (RhB)) in an aqueous medium in the presence of NaBH₄ as the reducing agent at room temperature. The catalytic activities were studied by UV-Vis absorption spectroscopy of the supernatant at regular time intervals. The short reaction times, mild reaction conditions, high efficiency (100% conversion), easy separation, and excellent chemical stability of the catalyst due to its heterogeneity and reusability are the advantages of this method. The results of the tests showed that reduction/decolorization reactions were successfully carried out within 10-140 s due to the good catalytic ability of Pd-CS-CAC. Moreover, Pd-CS-CAC was reused for 5 consecutive times with no loss of the initial shape, size, and morphology, confirming that it was a sustainable and robust nanocatalyst.

Synthesis of bentonite/Ag nanocomposite by laser ablation in air and its application in remediation

In this research, a simple, green, and efficient approach is described to produce novel bentonite/Ag nanocomposite wherein the preparation of Ag nanoparticles (Ag NPs) deployed the laser ablation method in air; Ag NPs are deposited on the bentonite via the magnetic stirring method. The structural and morphological characterization of the as-prepared bentonite/Ag nanocomposite (denoted as B/Ag30, 30 min being the laser ablation time) is accomplished using different methods. Additionally, the catalytic assessment of the ensued composite exhibited excellent catalytic reduction/degradation activity for common aqueous pollutants namely methyl orange (MO), congo red (CR) and 4-nitrophenol (4-NP) utilizing NaBH₄ as reductant. Furthermore, the recycling tests displayed the high stability/reusability of B/Ag30 nanocomposite for at least 4 runs with retention of catalytic prowess.

Noble metal nanoparticles (Mx = Ag, Au, Pd) decorated graphitic carbon nitride nanosheets for ultrafast catalytic reduction of anthropogenic pollutant, 4-nitrophenol

We report an effective facile immobilization of noble nanoparticles (M_x = Ag, Au and Pd) assembled on g-C₃N₄ (g-CN) prepared via a simple ultra-sonication strategy. The M_x assembled g-CN nanocomposites were applied for the effective conversion of 4-nitrophenol (4-NP). As prepared nanocomposites were characterized by techniques of XRD, SEM-EDS, TEM, XPS, and FT-IR analysis to gain crystallographic structural, and morphological insights. The Pd@g-C₃N₄ (Pd@g-CN) nanocomposite exhibited best catalytic performance (k_app = 1.141 min^-1) toward the conversion of 4-NP to 4-aminophenol (4-AP), almost 100% within 4 min using aqueous sodium borohydride (NaBH₄). The higher catalytic efficiency of Pd@g-CN could be attributed to the surface electron density on the Pd and rapid electron transfer capacity. Interestingly, g-CN not only role as a stabilizer but also provided compatibility for noble metal deposition, which improves the chemical and morphological stability of noble metal nanoparticles. Different reaction parameters including concentrations of 4-NP, and catalyst amount were studied. These unique combinations make noble metal nanoparticles anchored g-CN nanosheets an ideal platform for catalysis applications and environmental remediation.

Modification of structured bio‑carbon derived from spongin-based scaffolds with nickel compounds to produce a functional catalyst for reduction and oxidation reactions: Potential for use in environmental protection

Three different 3D fibrous-like NiO/Ni(OH)₂/Ni‑carbonized spongin-based materials were prepared via a simple sorption-reduction method. Depending on the support used, the catalysts were composed of carbon, nickel oxide, nickel hydroxide and zero-valent nickel, with the surface content of the nickel-containing phase in the range 15.2-26.0 wt%. Catalytic studies showed promising activity in the oxidation of phenolic compounds in water and in the reduction of 4-nitrophenol. The oxidation efficiency depends on the substrate used and ranges from 80% for phenol at pH 2 to 99% for 4-chlorophenoxyacetic acid (4-CPA) and methylchlorophenoxypropionic acid (MCPP). In the reduction reaction, all catalysts exhibited superior activity, with rate constants in the range 0.648-1.022 min^-1. The work also includes a detailed investigation of reusability and kinetic studies.

A versatile β-cyclodextrin and N-heterocyclic palladium complex bi-functionalized iron oxide nanoadsorbent for water treatment

By industrialization, management of water resources is known as one of the most challenging issues for human society due to the presence of various contaminants such as oil, azo dyes, and micropollutants in water. The treatment of wastewaters containing more than one type of pollutants via a single-step process cannot be performed by a simple adsorption process. In this study, by combining the advantages of superparamagnetic iron oxide, carboxymethyl-β-cyclodextrin polymer, and N-heterocyclic palladium complex, a versatile bi-functionalized iron oxide nanoadsorbent [Fe₃O₄@CM-β-CDP@Tet-Pd] was fabricated for the capture of toxic dyes in wastewater. The structure of nanoadsorbent was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, and vibrating sample magnetometer analysis. Afterward, the catalytic activity of the synthesized nanoadsorbent was examined in the aqueous solution of sodium borohydride as the reducing agent for rhodamine B, methylene blue, 4-nitrophenol, Metanil yellow, and Eosin Y. The UV-vis spectroscopy was used to monitor the catalytic activity of the [Fe₃O₄@CM-β-CDP@Tet-Pd] in an aqueous medium. The nanoadsorbent was successfully recovered and re-used six times, without remarkable loss in its catalytic activity. These results showed that the combination of iron oxide nanoparticles with carboxymethyl-β-cyclodextrin polymer provides a promising well-performed and easily recyclable nanoadsorbent for dye uptake and wastewater treatment.

Catalytically active nanosized Pd9Te4 (telluropalladinite) and PdTe (kotulskite) alloys: first precursor-architecture controlled synthesis using palladium complexes of organotellurium compounds as single source precursors

Several intermetallic binary phases of Pd-Te including Pd3Te2, PdTe, PdTe2, Pd9Te4, Pd3Te, Pd2Te, Pd20Te7, Pd8Te3, Pd7Te2, Pd7Te3, Pd4Te and Pd17Te4 are known, and negligible work (except few studies on PdTe) has been done on exploring applications of such phases and their fabrication at nanoscale. Hence, Pd(ii) complexes Pd(L1)Cl2 and Pd(L2-H)Cl (L1): Ph-Te-CH2-CH2-NH2 and L2: HO-2-C6H4-CH[double bond, length as m-dash]N-CH2CH2-Te-Ph were synthesized. Under similar thermolytic conditions, complex Pd(L1)Cl2 with bidentate coordination mode of ligand provided nanostructures of Pd9Te4 (telluropalladinite) whereas Pd(L2-H)Cl with tridentate coordination mode of ligand yielded PdTe (kotulskite). Bimetallic alloy nanostructures possess high catalytic potential for Suzuki coupling of aryl chlorides, and reduction of 4-nitrophenol. They are also recyclable upto six reaction cycles in Suzuki coupling.

Chemoselective hydrogenation of cinnamaldehyde over a tailored oxygen-vacancy-rich Pd@ZrO2 catalyst

Selective hydrogenation of cinnamaldehyde to hydrocinnamaldehyde is captivating due to its industrial relevance.

Controlled Synthesis of Palladium Nanocubes as an Efficient Nanocatalyst for Suzuki-Miyaura Cross-Coupling and Reduction of p-Nitrophenol

Anisotropic nanocatalysts have attracted considerable attention in comparison to bulk/nanocatalysts for their enhanced activity and reactivity. The demand toward anisotropic palladium (Pd) nanostructures has increased rapidly in the field of catalysis. Pd is a well-known active catalyst for several carbon-carbon (C-C) cross-coupling reactions; among them, the Suzuki-Miyaura cross-coupling reaction is one of the most versatile and dominant methods for constructing the extraordinarily useful unsymmetrical biaryls and also for hydrogenation of organic contaminants like p-nitrophenol (p-NP). This paper provides a brief explanation about the controlled synthesis, characterization, and catalytic activity of well-defined palladium nanocubes (Pd NCs) prepared by a seed-mediated method. The synthesized monodispersed Pd NCs were characterized by spectroscopic and microscopic tools such as UV-visible, XRD, FESEM, HRTEM, and EDS analyses. Pd NCs proved as an efficient catalyst for Suzuki-Miyaura cross-coupling reactions and p-NP reduction. The catalyst shows enhanced activity, greater stability, and higher selectivity with remarkable recyclability up to 92% for five consecutive cycles. The catalytic performance of the synthesized Pd NCs was also studied in the reduction of the organic contaminant p-NP, which showed an excellent performance screening of 99% conversion in 6 min.

Preparation of Silica@Silica Core-Shell Microspheres Using an Aqueous Two-Phase System in a Novel Microchannel Device

In the present work, a novel microchannel device was developed and used for the preparation of core-shell microspheres combining with a dextran/poly(ethylene glycol) diacrylate (DEX/PEGDA) aqueous two-phase system. Silica@silica core-shell microspheres were prepared as a model material. Silica@silica core-shell microspheres with different sizes of cores and thicknesses of shells were prepared by using different flowrate ratios of DEX/silica and PEGDA/silica aqueous solutions. The content of colloidal silica and the calcination temperature have a significant effect on the texture properties of the prepared core-shell microspheres. The surface area decreased from 199 to 177 m²/g with an increase in the colloidal silica content from 30 to 60 wt %. For a specific colloidal silica content (50 wt %), with the increase in calcination temperature from room temperature to 650 °C, the total pore volume went through a maximum of 0.7 cm³ g^-1 with a surface area of 178 m² g^-1 and pore size of 7.32 nm at 450 °C. Due to the accumulation of metal nanoparticles in DEX, different metal nanoparticles (Ni and Pd) were successfully introduced into the core of the core-shell microspheres for the preparation of silica/metal nanoparticles@silica core-shell microsphere catalysts. The catalysts showed similar catalytic performance as the metal nanoparticles for hydrogenation of 4-nitrophenol with a conversion higher than 95%. However, the core-shell microsphere catalyst is much easier to recover. The reuse experiments indicated that the core-shell catalyst has high stability.

The preparation of hollow Fe3O4/Pd@C NCs to stabilize subminiature Pd nanoparticles for the reduction of 4-nitrophenol

Hollow Fe₃O₄/Pd@C NCs to stabilize subminiature Pd nanoparticles and exhibit excellent performance in the reduction of 4-NP.

Carbon Supported Gold Nanoparticles for the Catalytic Reduction of 4-Nitrophenol

This work is a detailed study on how to optimize gold colloids preparation and their deposition to very different in nature carbon materials. The change of the continuous phase and its dielectric constant is used to assure the good dispersion of the hydrophilic/hydrophobic carbons and the successful transfer of the preformed small size colloids to their surface. The sintering behavior of the particles during the calcination step is also studied and the optimal conditions to reduce to a minimum the particle size increase during the protecting agent removal phase are found. The as prepared catalysts have been tested in a relevant reaction in the field of environmental catalysis such as the reduction of 4-nitrophenol leading to promising results. Overall, this work proposes an important methodology to follow when a carbonaceous material are selected as catalyst supports for green chemistry reactions.

Synthesis of 1-Substituted 1H-1,2,3,4-Tetrazoles Using Biosynthesized Ag/Sodium Borosilicate Nanocomposite

An expedient solvent-free methodology has been developed to produce 1-substituted 1H-1,2,3,4-tetrazoles using sodium borosilicate glass-supported silver nanoparticles (Ag NPs) as a novel heterogeneous catalyst. A cost-efficient, facile, and greener method was deployed for the creation of Ag/sodium borosilicate nanocomposite (ASBN) catalyst by using Aleurites moluccana leaf extract as a stabilizing and reducing agent. The ASBN catalyst was identified using the latest microscopic and spectroscopic techniques such as FT-IR, TEM, FESEM, XRD, EDS, and elemental mapping. The deployment of this new catalyst enables the preparation of assorted 1-substituted tetrazoles in good to high yields via an easy work-up procedure in a relatively short reaction time under environmentally friendly conditions without using harmful and toxic reducing agents. The ASBN catalyst can be recycled and reused multiple times without meaningful loss of activity. To extend the application of the ASBN, the performance of the quantitative structure-activity relationships model was investigated for protein binding and toxicity hazard considerations.

Conjugated Macrocycle Polymer Nanoparticles with Alternating Pillarenes and Porphyrins as Struts and Cyclic Nodes

Conjugated macrocycle polymers (CMPs) integrated using the macrocyclic confinement effect make imposing restrictions feasible on the growth of metal nanoparticles with confined size and high dispersion. For a proof-of-concept exploration, a novel nanoscale CMP is reported, denoted as DMP[5]-TPP-CMP, comprising two representative types of macrocyclic compounds, i.e., pillararene and porphyrin, as alternating strut/node components in the skeleton. With abundant anchoring sites, CMP implanted with Pd nanoparticles (Pd@DMP[5]-TPP-CMP, Pd@CMP for short) is successfully obtained through a simple post-treatment, exhibiting remarkable catalytic activity in Suzuki-Miyaura coupling (SMC) and nitrophenol reduction. The as-prepared Pd@CMP material shows favorable performance in expediting the process of SMC with an appreciable yield even under mild conditions, as well as in facilitating the electron transfer process from borohydride to nitrophenol through metal-hydride complex to produce aminophenol with a very short transformation time of 3 min and superior apparent kinetic rate constant k _app of 1.9 × 10^-2 s^-1 , higher than most palladium supports. Significantly, this multifunctional Pd@CMP composite material not only enriches the family of CMPs, but also sheds light on the development of green catalysts with excellent stability and easy recyclability without deactivation.

Ultrathin 2D metal–organic framework nanosheets prepared via sonication exfoliation of membranes from interfacial growth and exhibition of enhanced catalytic activity by their gold nanocomposites

Ultrathin two-dimensional (2D) metal–organic framework (MOF) nanosheets were prepared by a facile sonication exfoliation of MOF membranes from interfacial growth. The stacked form of nanosheets constituting the MOF membranes was significantly different to that of its layered MOF counterparts. This led to decreased interaction between nanosheets, so they could exfoliate readily from the MOF membranes. Moreover, Au nanoparticles were introduced to form nanocomposites. Enhanced catalytic activity and long-term stability of these nanocomposites were observed by a model reaction of the reduction of 4-nitrophenol to 4-aminophenol. This preparation method could be extended to other 2D MOF nanosheets and their nanocomposites.

Cu-MOF nanosheets were prepared by sonication exfoliation and the Au/Cu-MOF nanocomposites exhibited higher catalytic activity than pure Au NPs.

Ferrocenyl metal–organic framework hollow microspheres for in situ loading palladium nanoparticles as a heterogeneous catalyst

Zn–Fc MOF hollow microspheres were prepared for the in situ reduction of Pd²⁺ into Pd nanoparticles as a highly efficient heterogeneous catalyst.

Palygorskite Supported AuPd Alloy Nanoparticles as Efficient Nano-Catalysts for the Reduction of Nitroarenes and Dyes at Room Temperature

In this work, AuPd alloy palygorskite based Pal-NH₂@AuPd nano-catalysts were prepared and used as catalysts for the reduction of nitroarenes and dyes at room temperature. The surface of palygorskite (Pal) was first modified with 3-aminpropyltriethoxysilane, and then covered with AuPd alloy nanoparticles through co-reduction of HAuCl₄ and K₂PdCl₄. The morphology and structures of the Pal-NH₂@AuPd nano-catalysts were characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). The as-synthesized Pal-NH₂@AuPd nano-catalysts displayed excellent catalytic performance in reducing 4-nitrophenol (4-NP) and various other nitroaromatic compounds. Moreover, the catalytic activities of the Pal-NH₂@AuPd nano-catalysts were adjustable via changing the atomic ratio of AuPd alloy nanoparticles, leading to the Pal-NH₂@Au₄₈Pd₅₂ component as having the best atomic ratio. The Pal-NH₂@Au₄₈Pd₅₂ continued to display good catalytic stability after being reused for several cycles and there were no obvious changes, either of the morphology or the particle size distribution of the nano-catalysts. Furthermore, these Pal-NH₂@Au₄₈Pd₅₂ nano-catalysts also provided a convenient and accessible way for the degradation of dyes in artificial industrial wastewater.

Biosynthesis of waste pistachio shell supported silver nanoparticles for the catalytic reduction processes

Silver nanoparticles (NPs) are immobilised on pistachio shell surface by Cichorium intybus L. leaves extract as an antioxidant media. The Fourier transform infrared spectra, X-ray diffraction, field-emission scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy, and transmission electron microscope analyses confirmed the support of silver NPs on the pistachio shell (Ag NPs/pistachio shell). Ag NPs on the pistachio shell had a diameter basically in the 10-15 nm range. Reduction reactions of 4-nitrophenol (4-NP), and organic dyes at ambient condition were used in the investigation of the catalytic performance of the prepared catalyst. Through this research, the Ag NPs/pistachio shell shows a high activity and recyclability, and reusability without loss of its catalytic activity.