Biological activity of silver nanoparticles synthesized with Paenibacillus polymyxa exopolysaccharides

Recently, there has been increased interest in the synthesis of nanoparticles by using natural polysaccharides. These polysaccharides are eco-friendly, nontoxic, and cheap to prepare. On the other hand, the attention in hydrocolloids and films has significantly enhanced, and their application is very promising in the food, pharmaceutical, perfumery and cosmetics, oil, paper, and textile industries. In this context, the present study is aimed to prepare silver nanoparticles by using viscous and superviscous exopolysaccharides of the rhizobacterium Paenibacillus polymyxa strains, CCM 1465 and 88A, and examined the properties of the resultant nanoparticles. We examined the synthesis and properties of silver nanoparticles under variable synthetic conditions by using exopolysaccharides of the rhizobacteria Paenibacillus polymyxa CCM 1465 and 88A. To prepare nanoparticles, we used different combinations of exopolysaccharide and silver nitrate concentrations: 1-10 mg/mL and 1-40 mM, respectively. The resulting solutions were alkalinized from pH 7.5-12 and heated for 15, 30, and 60 min to determine the optimal synthetic conditions. We found that the exopolysaccharides of strains CCM 1465 and 88A reduced silver ions and acted as nanoparticle stabilizers. The prepared spherical, oval, and triangular particles were stable and ranged in size from 2 to 40 nm, depending on the strain and on the experimental conditions. The nanoparticles showed antibacterial and antifungal activity against Escherichia coli K-12, Pseudomonas aeruginosa 50.3, Bacillus subtilis 26-D, and Fusarium oxysporum. In addition, the nanoparticles were active against SK-MEL-2 human melanoma cells. This finding shows the promise of further research on the exopolysaccharides of P. polymyxa 1465 and 88А in different fields of science, including medicine.

Facile in situ fabrication of ZnO-embedded cellulose nanocomposite films with antibacterial properties and enhanced mechanical strength via hydrogen bonding interactions

Nano-ZnO were in situ prepared and permanently embedded in regenerated cellulose (RC) films by chemical precipitation to endow antibacterial of films and simultaneously strengthen tensile strength. ZnCl₂ was selected as a promoter of 1-allyl-3-methylimidazolium chloride for cellulose dissolution and as a precursor for nano-ZnO synthesis. Zn²⁺-absorbed cellulose solution was reacted with NaOH under ultrasonic to obtain nano-ZnO embedded RC films. The results indicated that RC films treated with the longest sonication time, highest regeneration solution basicity, and highest cellulose concentration were demonstrated to be the most effective against S. aureus, which agreed well with the dense and homogeneous distribution of high content of nano-ZnO on the film surface. The nanocomposite films achieved particularly high mechanical strength of 202.0 MPa with improved thermal stability. Strong H-bonding formed between nano-ZnO and cellulose, which contributed to high tensile strength and thermal stability of films. This work affords a simple approach to prepare cellulose nanocomposite with outstanding performance for potential application in packaging.

Ultrathin Films of Cellulose: A Materials Perspective

A literature review on ultrathin films of cellulose is presented. The review focuses on different deposition methods of the films-all the way from simple monocomponent films to more elaborate multicomponent structures-and the use of the film structures in the vast realm of materials science. The common approach of utilizing cellulose thin films as experimental models is therefore omitted. The reader will find that modern usage of cellulose thin films constitutes an exciting emerging area within materials science and it goes far beyond the traditional usage of the films as model systems.

Biogenic synthesis of biopolymer-based Ag-Au bimetallic nanoparticle constructs and their anti-proliferative assessment

This study reports an eco-friendly-based method for the preparation of biopolymer Ag-Au nanoparticles (NPs) by using gum kondagogu (GK; Cochlospermum gossypium), as both reducing and protecting agent. The formation of GK-(Ag-Au) NPs was confirmed by UV-absorption, fourier transformed infrared (FTIR), atomic force microscopy (AFM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The GK-(Ag-Au) NPs were of 1-12 nm in size. The anti-proliferative activity of nanoparticle constructs was assessed by MTT assay, confocal microscopy, flow cytometry and quantitative real-time polymerase chain reaction (PCR) techniques. Expression studies revealed up-regulation of p53, caspase-3, caspase-9, peroxisome proliferator-activated receptors (PPAR) PPARa and PPARb, genes and down-regulation of Bcl-2 and Bcl-x(K) genes, in B16F10 cells treated with GK-(Ag-Au) NPs confirming the anti-proliferative properties of the nanoparticles.

Surface Modification to Improve Properties of Materials

Surface properties of modern materials are usually inadequate in terms of wettability, adhesion properties, biocompatibility etc., so they should be modified prior to application or any further processing such as coating with functional materials. Both the morphological properties and chemical structure/composition should be modified in order to obtain a desired surface finish. Various treatment procedures have been employed, and many are based on the application of non-equilibrium gaseous media, especially gaseous plasma. Although such treatments have been studied extensively in past decades and actually commercialized, the exact mechanisms of interaction between reactive gaseous species and solid materials is still inadequately understood. This special issue provides recent trends in nanostructuring and functionalization of solid materials with the goal of improving their functional properties.

Green Procedure to Manufacture Nanoparticle-Decorated Paper Substrates

For this study, a paper impregnated with silver nanoparticles (AgNPs) was prepared. To prepare the substrates, aqueous suspensions of pulp fines, a side product from the paper production, were mixed with AgNP suspensions. The nanoparticle (NP) synthesis was then carried out via laser ablation of pure Ag in water. After the sheet formation process, the leaching of the AgNPs was determined to be low while the sheets exhibited antimicrobial activity toward Escherichia coli (E. coli).

Dynamic Protein Adsorption onto Dendritic Polyglycerol Sulfate Self-Assembled Monolayers

Biomaterial surfaces that are in contact with blood are often prone to unspecific protein adsorption and the activation of the blood clotting cascade. Hence, such materials usually must be functionalized with low-fouling or anticoagulant polymer coatings to increase their performance and durability with respect to various applications, for example as implants or in biomedical devices. Many coatings are based on anionic polymers, such as heparin, and are known to have pronounced anticoagulant effects. To assess the ability of a surface to prevent biofouling and to get further insight into its underlying mechanism, studies of the protein adsorption on self-assembled monolayers (SAMs) are often used as a predictive tool. In this article, we synthesized thioctic acid-functionalized dendritic polyglycerol sulfate (dPGS), which is a well-known synthetic heparin mimetic, and immobilized it onto gold model surfaces. The anionic dPGS SAMs were characterized via contact angle measurements and ellipsometry and compared to their neutral dendritic polyglycerol (dPG) counterparts with respect to their single protein adsorption of the two most abundant blood proteins albumin (Alb) and fibrinogen (Fib). In addition, we used QCM-D and ToF-SIMS as complementary techniques to investigate the dynamic, mixed, and sequential adsorption of Alb and Fib. Our results clearly demonstrate an incomplete Vroman effect and indicate the rearrangement of the adsorbed protein layers, which is presumably drive by ionic interactions between the two proteins and the anionic dPGS surface.

Sulfonate Groups and Saccharides as Essential Structural Elements in Heparin-Mimicking Polymers Used as Surface Modifiers: Optimization of Relative Contents for Antithrombogenic Properties

Blood compatibility is a long sought-after goal in biomaterials research, but remains an elusive one, and in spite of extensive work in this area, there is still no definitive information on the relationship between material properties and blood responses such as coagulation and thrombus formation. Materials modified with heparin-mimicking polymers have shown promise and indeed may be seen as comparable to materials modified with heparin itself. In this work, heparin was conceptualized as consisting of two major structural elements: saccharide- and sulfonate-containing units, and polymers based on this concept were developed. Copolymers of 2-methacrylamido glucopyranose, containing saccharide groups, and sodium 4-vinylbenzenesulfonate, containing sulfonate groups, were graft-polymerized on vinyl-functionalized polyurethane (PU) surfaces by free radical polymerization. This graft polymerization method is simple, and the saccharide and sulfonate contents are tunable by regulating the feed ratio of the monomers. Homopolymer-grafted materials, containing only sulfonate or saccharide groups, showed different effects on cell-surface interactions including platelet adhesion, adhesion and proliferation of vascular endothelial cells, and adhesion and proliferation of smooth muscle cells. The copolymer-grafted materials showed effects due to both sulfonate and saccharide elements with respect to blood responses, and the optimum composition was obtained at a 2:1 ratio of sulfonate to saccharide units (material designated as PU-PS1M1). In cell adhesion experiments, this material showed the lowest platelet and human umbilical vein smooth muscle cell density and the highest human umbilical vein endothelial cell density. Among the materials investigated, PU-PS1M1 also had the longest plasma clotting time. This material was thus shown to be multifunctional with a combination of properties, suggesting thromboresistant behavior in blood contact.

Nanotechnology in Glycomics: Applications in Diagnostics, Therapy, Imaging, and Separation Processes

This review comprehensively covers the most recent achievements (from 2013) in the successful integration of nanomaterials in the field of glycomics. The first part of the paper addresses the beneficial properties of nanomaterials for the construction of biosensors, bioanalytical devices, and protocols for the detection of various analytes, including viruses and whole cells, together with their key characteristics. The second part of the review focuses on the application of nanomaterials integrated with glycans for various biomedical applications, that is, vaccines against viral and bacterial infections and cancer cells, as therapeutic agents, for in vivo imaging and nuclear magnetic resonance imaging, and for selective drug delivery. The final part of the review describes various ways in which glycan enrichment can be effectively done using nanomaterials, molecularly imprinted polymers with polymer thickness controlled at the nanoscale, with a subsequent analysis of glycans by mass spectrometry. A short section describing an active glycoprofiling by microengines (microrockets) is covered as well.

Anticoagulant sodium alginate sulfates and their mussel-inspired heparin-mimetic coatings

We synthesized novel sodium alginate sulfates (SASs) with different sulfation degrees. All the SASs, DA-g-SASs, and coated substrates had good anticoagulant properties and biocompatibilit.

Selective immobilization and detection of DNA on biopolymer supports for the design of microarrays

DNA immobilization for the manufacturing of microarrays requires sufficient probe density, low unspecific binding and high interaction efficiency with complementary strands that are detected from solutions. Many of these important parameters are affected by the surface chemistry and the blocking steps conducted during DNA spotting and hybridization. This work describes an alternative method to selectively immobilize probes and to detect DNA on biocompatible, hydrophilic cellulose coated supports with low unspecific binding, high selectivity and appropriate sensitivity. It takes advantage of a relatively selective adsorption of water soluble polysaccharides on a solid cellulose matrix. Single strands of DNA were conjugated to this soluble polysaccharide and subsequently micro-spotted on solid cellulose thin films that were coated on glass and polymer slides. This resulted in adsorptively bound DNA-probes that were used to detect complementary, labelled DNA strands with different lengths and sequences by hybridization. The interaction of the DNA-conjugates with cellulose surfaces and the selectivity of hybridization were investigated by a quartz crystal microbalance with dissipation monitoring (QCM-D) and fluorescence scanning. The method of non-covalent immobilization of DNA probes on an uncharged, non-reactive, hydrophilic support lowers the unspecific binding and the number of handling steps required to conduct the experiments for the detection of DNA on microarrays. Simultaneously selectivity, hybridization efficiency and detection limits are maintained.

Ultra-sensitive detection of heparin via aPTT using plastic antibodies on QCM-D platform

One of the challenges faced by today's clinics is unavailability of practical, precise and accurate determination of the most commonly used anti-coagulant ‘heparin’ in human blood/plasma in surgery.

QCM-D providing new horizon in the domain of sensitivity range and information for haemostasis of human plasma

Monitoring of the haemostasis status is significant for proper therapeutic directions and decisions in surgery and innate coagulation disorders. In this regard, to gain a general overview of the plasmatic coagulation, prothrombin time (PT) tests are frequently combined with tests for activated partial thromboplastin time (aPTT). For aPTT we report for the first time that a QCM-D (Quartz Crystal Microbalances with Dissipation) based technique offers a better alternative to the standard coagulometer method in the perspective of range and information. We used heparin as anticoagulant to generate different coagulation times for human plasma. QCM-D astonishingly proved to be more sensitive and reliable than the standard coagulometer for aPTT range of upper limits of coagulation times. The established platform can monitor the fibrinogen concentration ranging from 1-6g/L (yielding R(2)=0.98 in calibration curves) along with aPTT from frequency and dissipation shifts together in a single set of measurements. Additionally the sensor layers have been tested for reusability, demonstrating no loss in sensor characteristics up to ten times measurements.

Gold nanoparticles in the engineering of antibacterial and anticoagulant surfaces

Simultaneous antibacterial and anticoagulant surfaces have been prepared by immobilization of engineered gold nanoparticles onto different kinds of surfaces. The gold nanoparticle core is surrounded by a hemocompatible, anticoagulant polysaccharide, 6-O chitosan sulfate, which serves as reduction and stabilizing agent for the generation of gold nanoparticles in a microwave mediated reaction. The particle suspension shows anticoagulant activity, which is investigated by aPTT and PT testing on citrated blood samples of three patients suffering from congenital or acquired bleeding disorders. The amount of nanoparticles deposited on the surfaces is quantified by a quartz crystal microbalance with dissipation unit. All gold containing surfaces exhibit excellent antimicrobial properties against the chosen model organism, Escherichia coli MG 1655 [R1-16]. Moreover, blood plasma coagulation times of the surfaces are increased after deposition of the engineered nanoparticles as demonstrated by QCM-D.

Design of anticoagulant surfaces based on cellulose nanocrystals

The anticoagulant activity of surfaces decorated with cellulose nanocrystals (CNCs) prepared via sulfuric acid hydrolysis, is explored.