Recent advances in zinc-air batteries

Double-skeleton interpenetrating network-structured alkaline solid-state electrolyte enables flexible zinc-air batteries with enhanced power density and long-term cycle life

The alkaline solid-state electrolytes have received widespread attention for their good safety and electrochemical stability. However, they still suffer from low conductivity and poor mechanical properties. Herein, we report the synthesis of double-network featured hydroxide-conductive membranes fabricated by polyvinyl alcohol (PVA) and chitosan (CS) as the double-skeletons. Then, we implanted quaternary ammonium salt guar hydroxypropyltrimonium chloride (GG) as the OH- conductor for high-performance electrochemical devices. By virtue of the unique stripe-like structure shared from the double skeleton with a high degree of compatibility and stronger hydrogen bond interactions, the polyvinyl alcohol/chitosan-guar hydroxypropyltrimonium chloride (PCG) solid-state electrolytes achieved optimal thermal stability (> 300 °C), mechanical property (∼ 34.15 MPa), dimensional stability (at any bending angle), and high ionic conductivity (13 mS cm-1) and ion mobility number (tion ∼ 0.90) compared with chitosan-guar hydroxypropyltrimonium chloride (CG) and polyvinyl alcohol-guar hydroxypropyltrimonium chloride (PG) electrolyte membrane. As a proof-of-concept application, the "sandwich"-type zinc-air battery (ZAB) assembled using PCG membrane as the electrolyte realized a high open-circuit voltage (1.39 V) and an excellent power density (128 mW cm-2). Notably, in addition to its long-term cycle life (30 h, 2 mA cm-2) and stable discharge plateau (12 h, 5 mA cm-2), it could even enable a flexible ZAB (F-ZAB) to readily power light-emitting diodes (LED) at any bending angle. These merits afford the PCG membrane a promising electrolyte for improving the performance of solid-state batteries.

Biochar from olive tree twigs and spent malt rootlets as electrodes in Zn-air batteries

Biochars, i.e. porous carbons obtained by pyrolysis of biomass, can act as electrocatalysts for oxygen evolution and oxygen reduction reaction. In the present work, two biochars have been prepared by using materials of completely different biomass origin: olive-tree twigs and spent malt rootlets (brewery wastes). Both biomass species were subjected to pyrolysis under limited oxygen supply and then they were activated by mixing with KOH and pyrolysis again. The obtained biochars were characterized by several techniques in order to determine their structural characteristics and the composition of their active components. Despite their different origin, the two biochars demonstrated similar structural and compositional characteristics thus highlighting the importance of the pyrolysis and activation procedure. Both biochars were used as electrocatalysts in the operation of rechargeable Zn-air batteries, where they also demonstrated similar electrocatalytic capacities with only a small advantage gained by olive-tree-twigs biochar. Compared to bare nanoparticulate carbon (carbon black), both biochars demonstrated a marked advantage towards oxygen evolution reaction.

Bifunctional Catalysts for CO2 Reduction and O2 Evolution: A Pivotal for Aqueous Rechargeable Zn-CO2 Batteries

The quest for the advancement of green energy storage technologies and reduction of carbon footprint is determinedly rising toward carbon neutrality. Aqueous rechargeable Zn-CO2 batteries (ARZCBs) hold the great potential to encounter both the targets simultaneously, i.e., green energy storage and CO2 conversion to value-added chemicals/fuels. The major descriptor of ARZCBs efficiency is allied with the reactions occurring at cathode during discharging (CO2 reduction) and charging (O2 evolution) which own different fundamental mechanisms and hence mandate the employment of two different catalysts. This presents an overall complex and expensive battery system which requires a concrete solution, while the development and application of a bifunctional cathode catalyst toward both reactions could reduce the complexity and cost and thus can be a pivotal for ARZCBs. However, despite the increasing research interest and ongoing research, a systematic evaluation of bifunctional catalysts is rarely reported. In this review, the need of bifunctional cathode catalysts for ARZCBs and associated challenges with strategies have been critically assessed. A detailed progress examination and understanding toward designing of bifunctional catalyst for ARZCBs have been provided. This review will enlighten the future research approaching boosted performance of ARZCBs through the development of efficient bifunctional cathode catalysts.

Photo-Assisted Rechargeable Metal Batteries: Principles, Progress, and Perspectives

The utilization of diverse energy storage devices is imperative in the contemporary society. Taking advantage of solar power, a significant environmentally friendly and sustainable energy resource, holds great appeal for future storage of energy because it can solve the dilemma of fossil energy depletion and the resulting environmental problems once and for all. Recently, photo-assisted energy storage devices, especially photo-assisted rechargeable metal batteries, are rapidly developed owing to the ability to efficiently convert and store solar energy and the simple configuration, as well as the fact that conventional Li/Zn-ion batteries are widely commercialized. Considering many puzzles arising from the rapid development of photo-assisted rechargeable metal batteries, this review commences by introducing the fundamental concepts of batteries and photo-electrochemistry, followed by an exploration of the current advancements in photo-assisted rechargeable metal batteries. Specifically, it delves into the elucidation of device components, operating principles, types, and practical applications. Furthermore, this paper categorizes, specifies, and summarizes several detailed examples of photo-assisted energy storage devices. Lastly, it addresses the challenges and bottlenecks faced by these energy storage systems while providing future perspectives to facilitate their transition from laboratory research to industrial implementation.

Interface Engineering for Aqueous Aluminum Metal Batteries: Current Progresses and Future Prospects

Aqueous aluminum metal batteries (AMBs) have attracted numerous attention because of the abundant reserves, low cost, high theoretical capacity, and high safety. Nevertheless, the poor thermodynamics stability of metallic Al anode in aqueous solution, which is caused by the self-corrosion, surface passivation, or hydrogen evolution reaction, dramatically limits the electrochemical performance and hampers the further development of AMBs. In this comprehensive review, the key scientific challenges of Al anode/electrolyte interface (AEI) are highlighted. A systematic overview is also provided about the recent progress on the rational interface engineering principles toward a relatively stable AEI. Finally, suggestions and perspectives for future research are offered on the optimization of Al anode and aqueous electrolytes to enable a stable and durable AEI, which may pave the way for developing high-performance AMBs.

Bioelectrochemical cascade reaction for energy-saving hydrogen production and innovative Zn-air batteries

The oxygen evolution reaction (OER) is an important half-reaction in electrochemical hydrogen production (EHP) and rechargeable metal-air batteries. However, the sluggish OER kinetics has seriously impeded their performance. Herein, we report a bioelectrochemical cascade system composed of glucose oxidase (GOx)-functionalized N-doped porous carbon nanofibers to replace OER in EHP and rechargeable Zn-air batteries (ZABs) applications. In this cascade system, GOx catalyzes oxidation of glucose to produce value-added gluconic acid accompanied with the generation of H2O2 under aerobic conditions. The subsequent electrocatalytic oxidation of H2O2 replacing the OER results in an onset voltage below 1.10 V for EHP, and a low charging voltage of 1.35 V as well as a small charging/discharging voltage gap of ∼ 280 mV over 170 h for ZABs in neutral aqueous electrolytes. The advantages of employing the innovative bioelectrochemical cascade reaction are demonstrated in EHP and ZABs, achieving the full utilization of biomass energy in energy-saving electrochemical systems for energy storage and conversion.

Sulfur Modified Carbon-Based Single-Atom Catalysts for Electrocatalytic Reactions

Efficient and sustainable energy development is a powerful tool for addressing the energy and environmental crises. Single-atom catalysts (SACs) have received high attention for their extremely high atom utilization efficiency and excellent catalytic activity, and have broad application prospects in energy development and chemical production. M-N4 is an active center model with clear catalytic activity, but its catalytic properties such as catalytic activity, selectivity, and durability need to be further improved. Adjustment of the coordination environment of the central metal by incorporating heteroatoms (e.g., sulfur) is an effective and feasible modification method. This paper describes the precise synthetic methods for introducing sulfur atoms into M-N4 and controlling whether they are directly coordinated with the central metal to form a specific coordination configuration, the application of sulfur-doped carbon-based single-atom catalysts in electrocatalytic reactions such as ORR, CO2RR, HER, OER, and other electrocatalytic reaction are systematically reviewed. Meanwhile, the effect of the tuning of the electronic structure and ligand configuration parameters of the active center due to doped sulfur atoms with the improvement of catalytic performance is introduced by combining different characterization and testing methods. Finally, several opinions on development of sulfur-doped carbon-based SACs are put forward.

Zn-based batteries for sustainable energy storage: strategies and mechanisms

Batteries play a pivotal role in various electrochemical energy storage systems, functioning as essential components to enhance energy utilization efficiency and expedite the realization of energy and environmental sustainability. Zn-based batteries have attracted increasing attention as a promising alternative to lithium-ion batteries owing to their cost effectiveness, enhanced intrinsic safety, and favorable electrochemical performance. In this context, substantial endeavors have been dedicated to crafting and advancing high-performance Zn-based batteries. However, some challenges, including limited discharging capacity, low operating voltage, low energy density, short cycle life, and complicated energy storage mechanism, need to be addressed in order to render large-scale practical applications. In this review, we comprehensively present recent advances in designing high-performance Zn-based batteries and in elucidating energy storage mechanisms. First, various redox mechanisms in Zn-based batteries are systematically summarized, including insertion-type, conversion-type, coordination-type, and catalysis-type mechanisms. Subsequently, the design strategies aiming at enhancing the electrochemical performance of Zn-based batteries are underscored, focusing on several aspects, including output voltage, capacity, energy density, and cycle life. Finally, challenges and future prospects of Zn-based batteries are discussed.

Advanced cathodes for aqueous Zn batteries beyond Zn2+ intercalation

Aqueous zinc (Zn) batteries have attracted global attention for energy storage. Despite significant progress in advancing Zn anode materials, there has been little progress in cathodes. The predominant cathodes working with Zn2+/H+ intercalation, however, exhibit drawbacks, including a high Zn2+ diffusion energy barrier, pH fluctuation(s) and limited reproducibility. Beyond Zn2+ intercalation, alternative working principles have been reported that broaden cathode options, including conversion, hybrid, anion insertion and deposition/dissolution. In this review, we report a critical assessment of non-intercalation-type cathode materials in aqueous Zn batteries, and identify strengths and weaknesses of these cathodes in small-scale batteries, together with current strategies to boost material performance. We assess the technical gap(s) in transitioning these cathodes from laboratory-scale research to industrial-scale battery applications. We conclude that S, I2 and Br2 electrodes exhibit practically promising commercial prospects, and future research is directed to optimizing cathodes. Findings will be useful for researchers and manufacturers in advancing cathodes for aqueous Zn batteries beyond Zn2+ intercalation.

Amorphous MnO2 Lamellae Encapsulated Covalent Triazine Polymer-Derived Multi-Heteroatoms-Doped Carbon for ORR/OER Bifunctional Electrocatalysis

The intelligent construction of non-noble metal materials that exhibit reversible oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with bifunctional electrocatalytic performance is greatly coveted in the realm of zinc-air batteries (ZABs). Herein, a crafted structure-amorphous MnO2 lamellae encapsulated covalent triazine polymer-derived N, S, P co-doped carbon sphere (A-MnO2/NSPC) is designed using a self-doped pyrolysis coupled with an in situ encapsulation strategy. The customized A-MnO2/NSPC-2 demonstrates a superior bifunctional electrocatalytic performance, confirmed by a small ΔE index of 0.64 V for ORR/OER. Experimental investigations, along with density functional theory calculations validate that predesigned amorphous MnO2 surface defects and abundant heteroatom catalytic active sites collectively enhance the oxygen electrocatalytic performance. Impressively, the A-MnO2/NSPC-based rechargeable liquid ZABs show a large open-circuit potential of 1.54 V, an ultrahigh peak power density of 181 mW cm-2, an enormous capacity of 816 mAh g-1, and a remarkable stability for more than 1720 discharging/charging cycles. Additionally, the assembled flexible all-solid-state ZABs also demonstrate outstanding cycle stability, surpassing 140 discharging/charging cycles. Therefore, this highly operable synthetic strategy offers substantial understanding in the development of magnificent bifunctional electrocatalysts for various sustainable energy conversions and beyond.

Exploring the synergistic effect of palladium nanoparticles and highly dispersed transition metals on carbon nitride/super-activated carbon composites for boosting electrocatalytic activity

In the present work, multifunctional electrocatalysts formed by palladium nanoparticles (Pd NPs) loaded on Fe or Cu-containing composite supports, based on carbon nitride (C3N4) and super-activated carbon with a high porosity development (SBET 3180 m2/g, VDR 1.57 cm3/g, and VT 1.65 cm3/g), were synthesised. The presence of Fe or Cu sites favoured the formation of Pd NPs with small average particle size and a very narrow size distribution, which agreed with Density Functional Theory (DFT) calculations showing that the interaction of Pd clusters with C3N4 flakes is weaker than with Cu- or Fe-C3N4 sites. The electroactivity was also dependent on the composition and, as suggested by preliminary DFT calculations, the Pd-Cu catalyst showed lower overpotential for hydrogen evolution reaction (HER) while bifunctional oxygen reduction reaction/ oxygen evolution reaction (ORR/OER) behaviour was superior in Pd-Fe sample. The Pd-Fe electrocatalyst was studied in a zinc-air battery (ZAB) for 10 h, showing a performance similar to a commercial Pt/C + RuO2 catalyst with a high content of precious metal. This study demonstrates the synergistic effect between Pd species and transition metals and shows that transition metals anchored on C3N4-based composite materials promote the electroactivity of Pd NPs in HER, ORR and OER due to the interaction between both species.

A Hybrid Redox-Mediated Zinc-Air Fuel Cell for Scalable and Sustained Power Generation

Zinc-air batteries (ZABs) have attracted considerable attention for their high energy density, safety, low noise, and eco-friendliness. However, the capacity of mechanically rechargeable ZABs was limited by the cumbersome procedure for replacing the zinc anode, while electrically rechargeable ZABs suffer from issues including low depth of discharge, zinc dendrite and dead zinc formation, and sluggish oxygen evolution reaction, etc. To address these issues, we report a hybrid redox-mediated zinc-air fuel cell (HRM-ZAFC) utilizing 7,8-dihydroxyphenazine-2-sulfonic acid (DHPS) as the anolyte redox mediator, which shifts the zinc oxidation reaction from the electrode surface to a separate fuel tank. This approach decouples fuel feeding and electricity generation, providing greater operation flexibility and scalability for large-scale power generation applications. The DHPS-mediated ZAFC exhibited a superior peak power density of 0.51 W/cm2 and a continuous discharge capacity of 48.82 Ah with ZnO as the discharge product in the tank, highlighting its potential for power generation.

In-Situ Nanoarchitectonics of Fe/Co LDH over Cobalt-Enriched N-Doped Carbon Cookies as Facile Oxygen Redox Electrocatalysts for High-Rate Rechargeable Zinc-Air Batteries

The reality of long-term rechargeable and high-performance zinc-air batteries relies majorly on cost-effective and eminent bifunctional electrocatalysts, which can perform both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Herein, we demonstrate a new approach for the synthesis of in-situ-grown layered double hydroxide of iron and cobalt over a cobalt nanoparticle-enriched nitrogen-doped carbon frame (CoL 2:1) by a simple coprecipitation reaction with facile scale-up and explore its electrocatalytic ORR and OER activity for an electrically rechargeable zinc-air battery. Consequently, the developed composite displays excellent ORR and OER activity with an ORR half-wave potential of 0.84 V, a limiting current density of 5.85 mA/cm2, and an OER overpotential of 320 mV with exceptional stability. The outstanding bifunctionality index of the catalyst (ΔE = 0.72 V) inspired us to utilize it as a cathode catalyst in an in-house developed prototype zinc-air battery. The battery could easily supply a specific capacity of 804 mAh/g with a maximum peak power density of 161 mW/cm2. The battery exhibits an attractive charge-discharge profile with a lesser voltage gap of 0.76 V at 10 mA/cm2 with durability for a period of 200 h and a voltage efficiency of 97%, which surpassed the corresponding Pt/C + RuO2-based zinc-air battery. Further, a maximum load of 50 mA/cm2 could easily be sustained during cycling, revealing its outstanding stability. A series-connected two CoL 2:1-based zinc-air batteries effortlessly enlighten a pinwheel fan and LED panel simultaneously, revealing its practicality. The high electrical conductivity and greater specific surface area of Co/N-C and its robust attachment with Fe/Co LDH preserves both active sites, thereby resulting in exceptional performance. Our method is capable of being flexible enough to create various bifunctional Co/N-C-based composite electrodes, opening up a feasible pathway to rechargeable zinc-air batteries with maximum energy density.

Polymetal-Chelated Fabrication of Bimetallic Nanophosphides as Electrocatalysts for Zinc-Air Batteries

Bimetallic phosphides are considered as promising electrocatalysts for zinc-air batteries toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). To address the semi-conductor inherent low electronic conductivity and catalytic activity, a polymetal-chelated strategy is employed to in situ fabricate bimetallic nanophosphides within carbon matrix anchoring by chemical bonding. The employment of biomolecule polydopamine (PDA) efficiently anchors various transition metal ions due to its strong chelating capability via inherent functional groups. Furthermore, the chelation of multi-metal ion is proved to promote the formation of graphitic nitrogen. The bimetallic FexCoyP phosphides nanoparticles are intimately encapsulated in carbon matrix through in situ carbonization and phosphatization processes. When utilized in Zinc-air batteries, Fe0.20Co0.80P anchored within N, P co-doped sub-microsphere (Fe0.20Co0.80P /PNC) exhibit a maximum power density of 167 mW cm-2 and cycle life up to 270 cycles, with a round-trip voltage of 0.955 V. The mechanisms for catalytic activity passivation are ascribed to the etching of nitrogen and oxidation of phosphorus in carbon matrix, as well as the oxidation of the surface phosphide on the sub-microspheres. This study presents a promising candidate for advancing the further development of energy conversation catalysis.

Stable Zinc Anode Facilitated by Regenerated Silk Fibroin-modified Hydrogel Protective Layer

Inherent dendrite growth and side reactions of zinc anode caused by its unstable interface in aqueous electrolytes severely limit the practical applications of zinc-ion batteries (ZIBs). To overcome these challenges, a protective layer for Zn anode inspired by cytomembrane structure is developed with PVA as framework and silk fibroin gel suspension (SFs) as modifier. This PVA/SFs gel-like layer exerts similar to the solid electrolyte interphase, optimizing the anode-electrolyte interface and Zn2+ solvation structure. Through interface improvement, controlled Zn2+ migration/diffusion, and desolvation, this buffer layer effectively inhibits dendrite growth and side reactions. The additional SFs provide functional improvement and better interaction with PVA by abundant functional groups, achieving a robust and durable Zn anode with high reversibility. Thus, the PVA/SFs@Zn symmetric cell exhibits an ultra-long lifespan of 3150 h compared to bare Zn (182 h) at 1.0 mAh cm-2-1.0 mAh cm-2, and excellent reversibility with an average Coulombic efficiency of 99.04% under a large plating capacity for 800 cycles. Moreover, the PVA/SFs@Zn||PANI/CC full cells maintain over 20 000 cycles with over 80% capacity retention under harsh conditions at 5 and 10 A g-1. This SF-modified protective layer for Zn anode suggests a promising strategy for reliable and high-performance ZIBs.

Ceria nanoclusters coupled with Ce-Nx sites for efficient oxygen reduction in Zn-air batteries

Rational construction of efficient carbon-supported rare earth cerium nanoclusters as oxygen reduction reaction (ORR) is of great significance to promote the practical application of zinc-air batteries (ZABs). Herein, N doped conductive carbon black anchored CeO2 nanoclusters (CeO2 Clusters/NC) for the ORR is reported. The volatile cerium species vaporized by CeO2 nanoclusters at high temperatures are captured by nitrogen-rich carbon carriers to form highly dispersed Ce-Nx active sites. Benefiting from the coupling effect between oxygen vacancies-enriched CeO2 nanoclusters and highly dispersed Ce-Nx sites, the prepared 2CeO2 Clusters/NC catalyst possesses an ORR half-wave potential of 0.88 V, superior electrochemical stability, and better methanol tolerance compared to commercial Pt/C catalysts. Moreover, the 2CeO2 Clusters/NC involved liquid ZABs show excellent energy efficiency, superior stability, and a high energy density of 982 Wh kg-1 at 10 mA cm-2.

An Overview and Future Perspectives of Rechargeable Flexible Zn-Air Batteries

Environmental friendliness and low-cost zinc-air batteries for flexible rechargeable applications have great potential in the field of flexible electronics and smart wearables owing to high energy density and long service life. However, the current technology of flexible rechargeable zinc-air batteries to meet the commercialization needs still facing enormous challenges due to the poor adaptability of each flexible component of the zinc-air batteries. This review focused on the latest progress over the past 5 years in designing and fabricating flexible self-standing air electrodes, flexible electrolytes and zinc electrodes of flexible Zn-air batteries, meanwhile the basic working principle of each component of flexible rechargeable zinc-air batteries and battery structures optimization are also described. Finally, challenges and prospects for the future development of flexible rechargeable zinc-air batteries are discussed. This work is intended to provide insights and general guidance for future exploration of the design and fabrication on high-performance flexible rechargeable zinc-air batteries.

A Review of Rechargeable Zinc-Air Batteries: Recent Progress and Future Perspectives

Zinc-air batteries (ZABs) are gaining attention as an ideal option for various applications requiring high-capacity batteries, such as portable electronics, electric vehicles, and renewable energy storage. ZABs offer advantages such as low environmental impact, enhanced safety compared to Li-ion batteries, and cost-effectiveness due to the abundance of zinc. However, early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox kinetics. Recent advancements in restructuring the anode, utilizing alternative electrolytes, and developing bifunctional oxygen catalysts have significantly improved ZABs. Scientists have achieved battery reversibility over thousands of cycles, introduced new electrolytes, and achieved energy efficiency records surpassing 70%. Despite these achievements, there are challenges related to lower power density, shorter lifespan, and air electrode corrosion leading to performance degradation. This review paper discusses different battery configurations, and reaction mechanisms for electrically and mechanically rechargeable ZABs, and proposes remedies to enhance overall battery performance. The paper also explores recent advancements, applications, and the future prospects of electrically/mechanically rechargeable ZABs.

Lithium-Induced Oxygen Vacancies in MnO2@MXene for High-Performance Zinc-Air Batteries

The traditional methods for creating oxygen vacancies in materials present several challenges and limitations, such as high preparation temperatures, limited oxygen vacancy generation, and morphological destruction, which hinder the application of transition metal oxides in the field of zinc-air batteries (ZABs). In order to address these limitations, we have introduced a pioneering lithium reduction strategy for generating oxygen vacancies in δ-MnO2@MXene composite materials. This strategy stands out for its simplicity of implementation, applicability at room temperature, and preservation of the material's structural integrity. This research demonstrates that aqueous Ov-MnO2@MXene-5, with introduced oxygen vacancies, exhibits an outstanding oxygen reduction reaction (ORR) activity with an ORR half-wave potential reaching 0.787 V. DFT calculations have demonstrated that the enhanced activity could be attributed to adjustments in the electronic structure and alterations in adsorption bond lengths. These adjustments result from the introduction of oxygen vacancies, which in turn promote electron transport and catalytic activity. In the context of zinc-air batteries, cells with Ov-MnO2@MXene-5 as the air cathode exhibit outstanding performance, featuring a significantly improved maximum power density (198.3 mW cm-2) and long-term cycling stability. Through the innovative strategy of introducing oxygen vacancies, this study has successfully enhanced the electrochemical catalytic performance of MnO2, overcoming the limitations associated with traditional methods for creating oxygen vacancies. Consequently, this research opens up new avenues and directions for nonprecious metal catalyst application in ZABs.

Biomass-Derived Catalytically Active Carbon Materials for the Air Electrode of Zn-air Batteries

Given the growing environmental and energy problems, developing clean, renewable electrochemical energy storage devices is of great interest. Zn-air batteries (ZABs) have broad prospects in energy storage because of their high specific capacity and environmental friendliness. The unavailability of cheap air electrode materials and effective and stable oxygen electrocatalysts to catalyze air electrodes are main barriers to large-scale implementation of ZABs. Due to the abundant biomass resources, self-doped heteroatoms, and unique pore structure, biomass-derived catalytically active carbon materials (CACs) have great potential to prepare carbon-based catalysts and porous electrodes with excellent performance for ZABs. This paper reviews the research progress of biomass-derived CACs applied to ZABs air electrodes. Specifically, the principle of ZABs and the source and preparation method of biomass-derived CACs are introduced. To prepare efficient biomass-based oxygen electrocatalysts, heteroatom doping and metal modification were introduced to improve the efficiency and stability of carbon materials. Finally, the effects of electron transfer number and H2 O2 yield in ORR on the performance of ZABs were evaluated. This review aims to deepen the understanding of the advantages and challenges of biomass-derived CACs in the air electrodes of ZABs, promote more comprehensive research on biomass resources, and accelerate the commercial application of ZABs.

In situ modulating coordination fields of single-atom cobalt catalyst for enhanced oxygen reduction reaction

Single-atom catalysts, especially those with metal-N4 moieties, hold great promise for facilitating the oxygen reduction reaction. However, the symmetrical distribution of electrons within the metal-N4 moiety results in unsatisfactory adsorption strength of intermediates, thereby limiting their performance improvements. Herein, we present atomically coordination-regulated Co single-atom catalysts that comprise a symmetry-broken Cl-Co-N4 moiety, which serves to break the symmetrical electron distribution. In situ characterizations reveal the dynamic evolution of the symmetry-broken Cl-Co-N4 moiety into a coordination-reduced Cl-Co-N2 structure, effectively optimizing the 3d electron filling of Co sites toward a reduced d-band electron occupancy (d5.8 → d5.28) under reaction conditions for a fast four-electron oxygen reduction reaction process. As a result, the coordination-regulated Co single-atom catalysts deliver a large half-potential of 0.93 V and a mass activity of 5480 A gmetal-1. Importantly, a Zn-air battery using the coordination-regulated Co single-atom catalysts as the cathode also exhibits a large power density and excellent stability.

Flexible solid-state Zn-air battery based on polymer-oxygen-functionalized g-C3N4 composite membrane

Personalized healthcare devices require an energy storage system that is flexible and has good mechanical strength and stability for long periods. Zn-air batteries show promise as an alternative to Li-air batteries for this purpose. Zn-air batteries with a high theoretical specific energy density of 1350 W h kg-1 have the potential to replace other metal-air batteries but faces the challenges, such as dendrite formation and Zn corrosion, hindering their successful commercialization. In this work, we report the design and performance optimization of a solid-state flexible Zn-air battery with superior performance and good mechanical property. In addition, we focused on the development of a gel-polymer composite membrane as the electrolyte. The main advantage of the flexible electrolyte is its optimum combination of good ionic conductivity and mechanical strength. Thus, we attempted to address the above-mentioned issues by modifying poly(vinyl alcohol) (PVA) with o-g-C3N4 through the in situ formation of a composite. The interaction between the functional groups of o-g-C3N4 and PVA increased the conductivity without compromising the mechanical behavior of the composite. According to the optimization of the composite composition, it was concluded that 0.32 wt% o-g-C3N4 in PVA showed the highest conductivity and excellent mechanical strength (increase from 25 MPa for pristine PVA membrane to 35 MPa for g-C3N4-PVA composite membrane). The performance of the solid-state battery was better (40 hours) than the standard PVA KOH (13 hours) membrane. Moreover, the stability of the battery was retained at various bending angles, demonstrating its potential to be used in flexible electronic devices.

Extending the Cycle Lifetime of Solid-State Zinc-Air Batteries by Arranging Stable Zinc Species Channels

The solid-state zinc-air batteries have attracted extensive attention due to their high theoretical energy density, high safety, and the compact structure. In this work, a novel hydrogel solid-state electrolyte was developed that was equipped with an interpenetrating network of zinc polyacrylate (PAZn) and polyacrylamide (PAM). At the same time, a cyclodextrin derivative with sulfonate groups was introduced as an additive. From the design of anionic groups in the network, effective and stable channels for zinc species have been established. The unique structure of the additives regulates the uniform deposition of zinc. After using this solid-state electrolyte, the cycle lifetime of solid-state zinc-air batteries assembled have been significantly extended. The byproducts were greatly suppressed and generated the smooth zinc electrode surface after the charge-discharge cycling.

A Portable Self-Powered Electrochemical Sensor Based on Zinc-Air Battery for Detection of Hydrogen Sulfide

The self-powered electrochemical sensor (SPES), an analytical sensing device without external power supply, is integrated with the dual function of power supply and detection performance, which lay the foundation for the development of intelligent and portable electrochemical sensing devices. Herein, a novel SPES based on a zinc-air battery was constructed for the detection of hydrogen sulfide (H2S) in the lysate of colon cancer cells. Typically, an Fe/Fe3C@graphene foam with oxygen reduction performance was used to construct SPES based on a zinc-air battery (ZAB-SPES), which brings the open-circuit voltage to 1.30 V. Among them, the poisoning effect of H2S causes the catalytic performance of the oxygen reduction catalyst to decrease, causing a significant decrease in the discharge voltage of ZAB. Based on this principle, ZAB-SPES was constructed for the detection of H2S using a digital multimeter. The proposed ZAB-SPES demonstrated good selectivity and reproducibility for detecting H2S compared to the results of the H2S-specific fluorescence probe. This strategy enriches the idea of constructing a self-powered sensor and a digital multimeter as detection devices, providing technical support for the portability of SPESs.

Bimetallic-Coordinated Covalent Triazine Framework-Derived FeNi Alloy Nanoparticle-Decorated Coral-Like Nanocarbons for Oxygen Electrocatalysis

It is highly desirable to fabricate transition bimetallic alloy-embedded porous nanocarbons with a unique nanoarchitecture for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) in rechargeable zinc-air batteries. In this work, we introduce a template-assisted in situ alloying synthesis of FeNi alloy nanoparticle-decorated coral-like nanocarbons (FeNi-CNCs) as efficient OER/ORR dual-functional electrocatalysts. The present materials are produced through polycondensation of a covalent triazine framework (CTF), the coordination of Ni and Fe ions, and sequential pyrolytic treatment. Through the pyrolysis process, the nanolamellar FeNi-CTF precursors can be facilely converted into FeNi alloy nanoparticle-decorated nanocarbons. These nanocarbons possess a distinctive three-dimensional (3D) coral-like nanostructure, which is favorable for the transport of oxygen and the diffusion of electrolyte. As a result, FeNi-CNC-800 with the highest efficiency exhibited remarkable electrocatalytic performance and great durability. Additionally, it also can be assembled into rechargeable zinc-air batteries that can be assembled in both liquid and solid forms, offering a superior peak power density, large specific capacity, and outstanding reusability during charging/discharging cycles (e.g., 5160 charging-and-discharging cycles at 10 mA cm-2 for the liquid forms). These traits make it a highly promising option in the burgeoning field of wearable energy conversion.

Rechargeable Zinc-Air Batteries: Advances, Challenges, and Prospects

Rechargeable zinc-air batteries (Re-ZABs) are one of the most promising next-generation batteries that can hold more energy while being cost-effective and safer than existing devices. Nevertheless, zinc dendrites, non-portability, and limited charge-discharge cycles have long been obstacles to the commercialization of Re-ZABs. Over the past 30 years, milestone breakthroughs have been made in technical indicators (safety, high energy density, and long battery life), battery components (air cathode, zinc anode, and gas diffusion layer), and battery configurations (flexibility and portability), however, a comprehensive review on advanced design strategies for Re-ZABs system from multiple angles is still lacking. This review underscores the progress and strategies proposed so far to pursuit the high-efficiency Re-ZABs system, including the aspects of rechargeability (from primary to rechargeable), air cathode (from unifunctional to bifunctional), zinc anode (from dendritic to stable), electrolytes (from aqueous to non-aqueous), battery configurations (from non-portable to portable), and industrialization progress (from laboratorial to practical). Critical appraisals of the advanced modification approaches (such as surface/interface modulation, nanoconfinement catalysis, defect electrochemistry, synergistic electrocatalysis, etc.) are highlighted for cost-effective flexible Re-ZABs with good sustainability and high energy density. Finally, insights are further rendered properly for the future research directions of advanced zinc-air batteries.

Core-Shell ZIF-8@ZIF-67-Derived Cobalt Nanoparticle-Embedded Nanocage Electrocatalyst with Excellent Oxygen Reduction Performance for Zn-Air Batteries

Metal-nitrogen-carbon (M-N-C) catalysts obtained from zeolitic imidazolate frameworks (ZIFs) have great potential in the oxygen reduction reaction (ORR). Herein, based on the same three-dimensional (3D) topological structure of ZIF-67 and ZIF-8, ZIF-67 is grown on the ZIF-8 surface by the epitaxial growth method, and ZIF-8 is used as a sacrificial template to obtain a Co-embedded layered porous carbon nanocage (CoPCN) electrocatalyst. Meanwhile, the self-sacrificing template effectively improves the specific surface area of the porous structure and reduces the depletion of active sites. The CoPCN shows a high half-wave potential of 0.885 V and superior stability as well as excellent methanol resistance. Theoretical calculations demonstrate that the Co-N1-C2 sites of CoPCN effectively reduce the energy barrier of ORR. In addition, a zinc-air battery (ZAB) based on the CoPCN exhibits excellent peak power density (90 mW cm-2) and superior cycle performance. This work presents a novel idea in the design of ZIF precursor systems to synthesize efficient ORR catalysts.

Understanding the Surprising Ionic Conductivity Maximum in Zn(TFSI)2 Water/Acetonitrile Mixture Electrolytes

Aqueous electrolytes composed of 0.1 M zinc bis(trifluoromethylsulfonyl)imide (Zn(TFSI)2) and acetonitrile (ACN) were studied using combined experimental and simulation techniques. The electrolyte was found to be electrochemically stable when the ACN V% is higher than 74.4. In addition, it was found that the ionic conductivity of the mixed solvent electrolytes changes as a function of ACN composition, and a maximum was observed at 91.7 V% of ACN although the salt concentration is the same. This behavior was qualitatively reproduced by molecular dynamics (MD) simulations. Detailed analyses based on experiments and MD simulations show that at high ACN composition the water network existing in the high water composition solutions breaks. As a result, the screening effect of the solvent weakens and the correlation among ions increases, which causes a decrease in ionic conductivity at high ACN V%. This study provides a fundamental understanding of this complex mixed solvent electrolyte system.

Niobium-doped conductive TiO-TiO2 heterostructure supported bifunctional catalyst for efficient and stable zinc-air batteries

The development of highly active and durable nonprecious metal-based bifunctional electrocatalysts for oxygen reduction/evolution reaction (ORR/OER) is important for rechargeable zinc-air batteries. Herein, a three-dimensional conductive niobium-doped TiO-TiO2 heterostructure supported ZIF-67-derived Co-NC bifunctional catalyst was fabricated. In the Co-NC@Nb-TiOx catalyst, the Nb doping promoted the formation of TiO-TiO2 heterojunction support, enhanced its conductivity and stability and provided strong electron metal-support interaction between Co-NC and Nb-TiOx. Also, the supported Co-NC nanoparticles provided abundant active sites with excellent ORR/OER activity. Experimental analysis reveals that the high OER activity of Co-NC@Nb-TiOx can be attributed to the in-situ generated CoOOH species. It exhibits excellent ORR activity, as shown by its onset potential (0.95 V vs. RHE) and half-wave potential (0.86 V vs. RHE). Its OER overpotential at 10 mA cm-2 is 480 mV. The zinc-air battery realizes outstanding cycling stability over 225 h cycles tested at 10 mA cm-2. This work demonstrates the importance of designing highly stable metal oxide-supported catalysts in electrochemical energy conversion devices.

Converting carbon black into an efficient and multi-site ORR electrocatalyst: the importance of bottom-up construction parameters

To boost efficient energy transitions, alternatives to expensive and unsustainable noble metal-based electrocatalysts for the oxygen reduction reaction (ORR) are needed. Having this in mind, carbon black - Black Pearls 2000 (BP) was enriched in active nitrogen-containing centers, including single-atom Fe-N sites surrounded by Fe nanoclusters, through a synthesis methodology employing only broadly available precursors. The methodical approach taken to optimize the synthesis conditions highlighted the importance of (1) a proper choice of the Fe precursor; (2) melamine as an N source to limit the formation of magnetite crystals and modulate the charge density nearby the active sites, and glucose to chelate/isolate Fe atoms and thus allow the Fe-N coordination to be established, with a limiting formation of Fe0 clusters; and (3) a careful dosing of the Fe load. The ORR on the optimized electrocatalyst (Fe0.06-N@BP) proceeds mostly through a four-electron pathway, having an onset potential (0.912 V vs. RHE) and limiting current density (4.757 mA cm-2) above those measured on Pt/C (0.882 V and 4.657 mA cm-2, respectively). Moreover, the current density yielded by Fe0.06-N@BP after 24 h at 0.4 V vs. RHE was still above that of Pt/C at t = 0 (4.44 mA cm-2), making it a promising alternative to noble metal-containing electrocatalysts in fuel cells.

Rapid Formation of Epitaxial Oxygen Evolution Reaction Catalysts on Dendrites with High Catalytic Activity and Stability

Oxygen evolution reaction is an essential but kinetically sluggish step in many energy storage and conversion processes and therefore is in pursuit of highly efficient and stable catalysts. Although nanosized transition-metal-based oxides/hydroxides exhibit high catalytic activity toward the oxygen evolution reaction (OER), many of them suffer from low stability at an anode current density in industrial scale. Herein, by combining a rapid epitaxial formation method with dynamic bubble-templated electrodeposition, we successfully developed single crystalline NiFeCu oxide catalysts with a hierarchical porous structure. It was found that the structure can facilitate fast electron transportation for the catalysts and retard the diffusion of the O atoms to the inner metallic current collector. The hierarchical pores inherited from the hydrogen bubble templates built ideal channels for the massive and rapid release of oxygen bubbles. As a consequence, the NiFeCu oxides catalyzed the OER more efficiently and steadily than the commercial RuO2 catalyst at an anode current density in industrial scale (300 mA/cm2). This work, by resolving the durability concerns for nanosized oxides, offers a series of highly efficient and stable catalysts for OER and a structure building strategy to boost the catalytic activity and stability for nonconductive catalysts.

Nitrogen-Doped Carbon Cubosomes as an Efficient Electrocatalyst with High Accessibility of Internal Active Sites

Porous carbon particles (PCPs) present considerable potential for applications across a wide range of fields, particularly within the realms of energy and catalysis. The control of their overall morphologies and pore structures has remained a big challenge. Here, using metal-organic frameworks (MOFs) as the precursor and polymer cubosomes (PCs) as the template, nitrogen-doped carbon cubosomes (SP-NCs) with a single primitive bicontinuous architecture are prepared. SP-NCs inherit the high porosity of MOFs, generating a high specific surface area of 825 m2 g-1 and uniformly distributed active sites with a 5.9 at % nitrogen content. Thanks to the presence of three-dimensional continuous mesochannels that enable much higher accessibility of internal active sites over those of their porous counterparts' lack of continuous channels, SP-NCs exhibit superior electrocatalytic performance for oxygen reduction reaction with a half-wave potential of 0.87 V, situating them in the leading level of the reported carbon electrocatalysts. Serving as an air cathode catalyst of the Zn-air battery, SP-NCs exhibit excellent performance, outperforming the commercial Pt/C catalysts.

Engineering of heterointerface of ultrathin carbon nanosheet-supported CoN/MnO enhances oxygen electrocatalysis for rechargeable Zn-air batteries

Designing bifunctional electrocatalysts with outstanding reactivity and durability towards the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) has remained a long-term aim for metal-air batteries. Achieving the high level of fusion between two distinct metal components to form bifunctional catalysts with optimized heterointerfaces and well-defined morphology holds noteworthy implications in the enhancement of electrocatalytic activity yet challenging. Herein, the fabrication of numerous heterointerfaces of CoN/MnO is successfully realized within ultrathin carbon nanosheets via a feasible self-templating synthesis strategy. Experimental results and theoretic calculations verify that the interfacial electron transfer from CoN to MnO at the heterointerface engenders an ameliorated charge transfer velocity, finely tuned energy barriers concerning reaction intermediates and ultimately accelerated reaction kinetics. The as-prepared CoN/MnO@NC demonstrates exceptional bifunctional catalytic performance, excelling in both OER and ORR showcasing a low reversible overpotential of 0.69 V. Furthermore, rechargeable liquid and quasi-solid-state flexible Zn-air batteries employing CoN/MnO@NC as the air-cathode deliver remarkable endurance and elevated power density, registering values of 153 and 116 mW cm-2 respectively and exceeding Pt/C + RuO2 counterparts and those reported in literature. Deeply exploring the effect of electron-accumulated heterointerfaces on catalytic activity would contribute wisdom to the development of bifunctional electrocatalysts for rechargeable metal-air batteries.

Green Energy Storage: Chitosan-Avocado Starch Hydrogels for a Novel Generation of Zinc Battery Electrolytes

Meeting the ever-increasing global energy demands through sustainable and environmentally friendly means is a paramount challenge. In response to this imperative, this study is dedicated to the development of biopolymer electrolytes, which hold promise for improving the efficiency, safety, and biodegradability of energy systems. The present study aims to evaluate hydrogels synthesized from chitosan biopolymer and starch from avocado seed residues in different ratios, and dried using freeze-thawing and freeze-drying techniques. Epichlorohydrin was used as a chemical crosslinker to create a suitable degree of swelling using an ionic solution. Physical freezing crosslinking strategies such as freezing-thawing and freezing-drying were performed to generate a denser porous structure in the polymer matrix. Subsequently, synthesized electrolytes were immersed in 12 M KOH solution to improve their electrochemical properties. The effect of the different ratios of starch in the hydrogels on the structural properties of the materials was evaluated using characterization techniques such as FTIR and XRD, which allowed to confirm the crosslinking between chitosan and starch. The electrochemical performance of the hydrogels is assessed using electrochemical impedance spectroscopy. A maximum conductivity value of 0.61 S·cm-1 was achieved at room temperature. The designed materials were tested in prototype zinc-air batteries; their specific capacity value was 1618 mA h·g-1, and their obtained power density was 90 mW·cm-2. These substantial findings unequivocally underscore the potential of the synthesized hydrogels as highly promising electrolytes for the application in zinc-air battery systems.

Application of Conductive MOF in Zinc-Based Batteries

The use of conductive MOFs (c-MOFs) in zinc-based batteries has been a popular research direction. Zinc-based batteries are widely used with the advantages of high specific capacity and safety and stability, but they also face many problems. c-MOFs have excellent conductivity compared with other primitive MOFs, and therefore have better applications in zinc-based batteries. In this paper, the transfer mechanisms of the unique charges of c-MOFs: hop transport and band transport, respectively, are discussed and the way of electron transport is further addressed. Then, the various ways to prepare c-MOFs are introduced, among which solvothermal, interfacial synthesis, and postprocessing methods are widely used. In addition, the applications of c-MOFs are discussed in terms of their role and performance in different types of zinc-based batteries. Finally, the current problems of c-MOFs and the prospects for their future development are presented.

Extending conducting channels in Fe-N-C by interfacial growth of CNTs with minimal metal loss for efficient ORR electrocatalysis

Achieving a high electrocatalytic performance using a completely metal-free electrocatalyst, preferably based on only carbonaceous materials, remains a challenge. Alternatively, an efficient composite of a carbon nanostructure and a non-noble metal with minimum dependence on a metal holds immense potential. Although single-atom catalysis brings superior performance, its complex synthetic strategy limits its large-scale implementation. Previous investigation has shown that atomic dispersion (Fe-Nx-C) is accompanied by higher metal-loss compared to nanoparticle formation (Fe-NPs-N-C). Therefore, to achieve minimum metal loss, we first incorporated iron nanoparticles (Fe NPs) to N-doped carbon (N-C) and then exposed them to a cheap carbon source, melamine at high temperature, resulting in the growth of carbon nanotubes (CNTs) catalysed by those Fe NPs loaded on N-C (Fe-NPs-N-C). Thermogravimetric analysis showed that the metal-retention in the composite is higher than that in the bare carbon nanotube and even the atomically dispersed Fe-active sites on N-C. The composite material (Fe-NPs-N-C/CNT) shows a high half-wave potential (0.89 V vs. RHE) which is superior to that of commercial Pt/C towards the oxygen reduction reaction (ORR). The enhanced activity is attributed to the synergistic effect of high conductivity of CNTs and active Fe-sites as the composite exceeds the individual electrocatalytic performance shown by Fe-CNTs & Fe-NPs-N-C, and even that of atomically dispersed Fe-active sites on N-C.

(Fe-Co-Ni-Zn)-Based Metal-Organic Framework-Derived Electrocatalyst for Zinc-Air Batteries

Zinc-air batteries (ZABs) have garnered significant interest as a viable substitute for lithium-ion batteries (LIBs), primarily due to their impressive energy density and low cost. However, the efficacy of zinc-air batteries is heavily dependent on electrocatalysts, which play a vital role in enhancing reaction efficiency and stability. This scholarly review article highlights the crucial significance of electrocatalysts in zinc-air batteries and explores the rationale behind employing Fe-Co-Ni-Zn-based metal-organic framework (MOF)-derived hybrid materials as potential electrocatalysts. These MOF-derived electrocatalysts offer advantages such as abundancy, high catalytic activity, tunability, and structural stability. Various synthesis methods and characterization techniques are employed to optimize the properties of MOF-derived electrocatalysts. Such electrocatalysts exhibit excellent catalytic activity, stability, and selectivity, making them suitable for applications in ZABs. Furthermore, they demonstrate notable capabilities in the realm of ZABs, encompassing elevated energy density, efficacy, and prolonged longevity. It is imperative to continue extensively researching and developing this area to propel the advancement of ZAB technology forward and pave the way for its practical implementation across diverse fields.

Recent Progress on Electrode Design for Efficient Electrochemical Valorisation of CO2 , O2 , and N2

CO2 reduction, two-electron O2 reduction, and N2 reduction are sustainable technologies to valorise common molecules. Their further development requires working electrode design to promote the multistep electrochemical processes from gas reactants to value-added products at the device level. This review proposes critical features of a desirable electrode based on the fundamental electrochemical processes and the development of scalable devices. A detailed discussion is made to approach such a desirable electrode, addressing the recent progress on critical electrode components, assembly strategies, and reaction interface engineering. Further, we highlight the electrode design tailored to reaction properties (e.g., its thermodynamics and kinetics) for performance optimisation. Finally, the opportunities and remaining challenges are presented, providing a framework for rational electrode design to push these gas reduction reactions towards an improved technology readiness level (TRL).

Biomass-Derived Carbon Aerogels for ORR/OER Bifunctional Oxygen Electrodes

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucial electrochemical reactions that play vital roles in energy conversion and storage technologies, such as fuel cells and metal-air batteries. Typically, noble-metal-based catalysts are required to enhance the sluggish kinetics of the ORR and OER, but their high costs restrict their practical commercial applications. Thus, highly active and strong non-noble metal catalysts are essential to address the cost and durability challenge. Based on previous research, carbon-based catalysts may present the best alternatives to these precious metals in the future owing to their affordability, very large surface areas, and superior mechanical and electrical qualities. In particular, carbon aerogels prepared using biomass as the precursors are referred to as biomass-derived carbon aerogels. They have sparked broad attention and demonstrated remarkable performance in the energy conversion and storage sectors as they are ecologically beneficial, affordable, and have an abundance of precursors. Therefore, this review focuses on various nanostructured materials based on biomass-derived carbon aerogels as ORR/OER catalysts, including metal atoms, metal compounds, and alloys.

Coordination Engineering of Dual Co, Ni Active Sites in N-Doped Carbon Fostering Reversible Oxygen Electrocatalysis

The development of affordable and non-noble-metal-based reversible oxygen electrocatalysts is required for renewable energy conversion and storage systems like metal-air batteries (MABs). However, the nonbifunctionality of most of the catalysts impedes their use in rechargeable MAB applications. Moreover, the loss of active sites also affects the long-term performance of the electrocatalyst toward oxygen electrocatalysis. In this work, we report a simplistic yet controllable chemical approach for the synthesis of dual transitional metals such as cobalt, nickel, and nitrogen-doped carbon (CoNi-NC) as bifunctional electrode materials for rechargeable zinc-air batteries (ZABs). The spatially isolated Ni-N4 and Co-N4 active units were rendered for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), respectively. The individual efficacy of both reversible reactions enables an ΔE value of ∼0.72 V, which outperforms several bifunctional electrocatalysts reported in the literature. The half-wave potential (E1/2) and overpotential were achieved at 0.83 V and 330 mV (vs RHE) for ORR and OER, respectively. The peak power density of ZAB equipped with the CoNi-NC catalyst was calculated to be 194 mW cm-2. The present strategy for the synthesis of bifunctional electrocatalysts with dual active sites offers prospects for developing electrochemical energy storage and conversion systems.

Electrodeposited Ionomer Protection Layer for Negative Electrodes in Zinc-Air Batteries

The protection of zinc anodes in zinc-air batteries (ZABs) is an efficient way to reduce corrosion and Zn dendrite formation and improve cyclability and battery efficiency. Anion-conducting poly(N-vinylbenzyl N,N,N-trimethylammonium)chloride (PVBTMA) thin films were electrodeposited directly on zinc metal using cyclic voltammetry. This deposition process presents a combination of advantages, including selective anion transport in PVBTMA reducing zinc crossover, high interface quality by electrodeposition improving the corrosion protection of zinc and high ionomer stiffness opposing zinc dendrite perforation. The PVBTMA layer was observed by optical and electron microscopy, and the wettability of the ionomer-coated surface was investigated by contact angle measurements. ZABs with PVBTMA-coated Zn showed an appreciable and stable open-circuit voltage both in alkaline electrolyte (1.55 V with a Pt cathode) and in miniaturized batteries (1.31 V with a carbon paper cathode). Cycling tests at 0.5 mA/cm² within voltage limits of 2.1 and 0.8 V gave a stable discharge capacity for nearly 100 cycles with a liquid electrolyte and more than 20 cycles in miniaturized batteries. The faster degradation of the latter ZAB was attributed to the clogging of the carbon air cathode and drying or carbonation of the electrolyte sorbed in a Whatman paper.

Improving Cycle Life of Zinc-Air Batteries with Calcium Ion Additive in Electrolyte or Separator

The electrolyte carbonation and the resulting air electrode plugging are the primary factors limiting the cycle life of aqueous alkaline zinc-air batteries (ZABs). In this work, calcium ion (Ca²⁺) additives were introduced into the electrolyte and the separator to resolve the above issues. Galvanostatic charge-discharge cycle tests were carried out to verify the effect of Ca²⁺ on electrolyte carbonation. With the modified electrolyte and separator, the cycle life of ZABs was improved by 22.2% and 24.7%, respectively. Ca²⁺ was introduced into the ZAB system to preferentially react with CO₃^2- rather than K⁺ and then precipitated granular CaCO₃ prior to K₂CO₃, which was deposited on the surface of the Zn anode and air cathode to form a flower-like CaCO₃ layer, thereby prolonging its cycle life.

One-dimensional carbon based nanoreactor fabrication by electrospinning for sustainable catalysis

An efficient and economical electrocatalyst as kinetic support is key to electrochemical reactions. For this reason, chemists have been working to investigate the basic changing of chemical principles when the system is confined in limited space with nanometer-scale dimensions or sub-microliter volumes. Inspired by biological research, the design and construction of a closed reaction environment, namely the reactor, has attracted more and more interest in chemistry, biology, and materials science. In particular, nanoreactors became a high-profile rising star and different types of nanoreactors have been fabricated. Compared with the traditional particle nanoreactor, the one-dimensional (1D) carbon-based nanoreactor prepared by the electrospinning process has better electrolyte diffusion, charge transfer capabilities, and outstanding catalytic activity and selectivity than the traditional particle catalyst which has great application potential in various electrochemical catalytic reactions.

Self-Sacrificing Template Synthesis of Carbon Nanosheets Assembled Hollow Spheres with Abundant Active Fe-N4 O1 Moieties for Electrocatalytic Oxygen Reduction

Single-atom Fe-N-C (Fe₁ -N-C) materials represent the benchmarked electrocatalysts for oxygen reduction reaction (ORR). However, single Fe atoms in the carbon skeletons cannot be fully utilized due to the mass transfer limitation, severely restricting their intrinsic ORR properties. Herein, a self-sacrificing template strategy is developed to fabricate ultrathin nanosheets assembled Fe₁ -N-C hollow microspheres (denoted as Fe₁ /N-HCMs) by rational carbonization of Fe³⁺ chelating polydopamine coated melamine cyanuric acid complex. The shell of Fe₁ /N-HCMs is constructed by ultrathin nanosheets with thickness of only 2 nm, which is supposed to be an ideal platform to isolate and fully expose single metal atoms. Benefiting from unique hierarchical hollow architecture with highly open porous structure, 2 nm-thick ultrathin nanosheet subunits and abundant Fe-N₄ O₁ active sites revealed by X-ray absorption fine structure analysis, the Fe₁ /N-HCMs exhibit high ORR performance with a positive half-wave potential of 0.88 V versus the reversible hydrogen electrode and robust stability. When served as air-cathode catalysts with ultralow loading mass of 0.25 mg cm^-2 , Fe₁ /N-HCMs based Zn-air batteries present a maximum power density of 187 mW cm^-2 and discharge specific capacity of 806 mA h g_Zn ^-1 in primary Zn-air batteries, all exceeding those of commercial Pt/C.

Recent advances in zinc-air batteries: self-standing inorganic nanoporous metal films as air cathodes

Zinc-air batteries (ZABs) have promising prospects as next-generation electrochemical energy systems due to their high safety, high power density, environmental friendliness, and low cost. However, the air cathodes used in ZABs still face many challenges, such as the low catalytic activity and poor stability of carbon-based materials at high current density/voltage. To achieve high activity and stability of rechargeable ZABs, chemically and electrochemically stable air cathodes with bifunctional oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) activity, fast reaction rate with low platinum group metal (PGM) loading or PGM-free materials are required, which are difficult to achieve with common electrocatalysts. Meanwhile, inorganic nanoporous metal films (INMFs) have many advantages as self-standing air cathodes, such as high activity and stability for both the ORR/OER under highly alkaline conditions. The high surface area, three-dimensional channels, and porous structure with controllable crystal growth facet/direction make INMFs an ideal candidate as air cathodes for ZABs. In this review, we first revisit some critical descriptors to assess the performance of ZABs, and recommend the standard test and reported manner. We then summarize the recent progress of low-Pt, low-Pd, and PGM-free-based materials as air cathodes with low/non-PGM loading for rechargeable ZABs. The structure-composition-performance relationship between INMFs and ZABs is discussed in-depth. Finally, we provide our perspectives on the further development of INMFs towards rechargeable ZABs, as well as current issues that need to be addressed. This work will not only attract researchers' attention and guide them to assess and report the performance of ZABs more accurately, but also stimulate more innovative strategies to drive the practical application of INMFS for ZABs and other energy-related technologies.

Atomically Dispersed Fe-N4 Sites and NiFe-LDH Sub-Nanoclusters as an Excellent Air Cathode for Rechargeable Zinc-Air Batteries

The sluggish four-electron processes of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) limit the development of rechargeable Zn-air batteries (RZABs). Highly efficient ORR/OER bifunctional electrocatalysts are therefore highly desired for the commercialization of RZABs in large scale. Herein, the Fe-N₄-C (ORR active sites) and NiFe-LDH clusters (OER active sites) are successfully integrated within a NiFe-LDH/Fe,N-CB electrocatalyst. The NiFe-LDH/Fe,N-CB electrocatalyst is first prepared by the introduction of Fe-N₄ into carbon black (CB), followed by the growth of NiFe-LDH clusters. The cluster nature of NiFe-LDH effectively avoids the blocking of Fe-N₄-C ORR active centers and affords excellent OER activity. The NiFe-LDH/Fe,N-CB electrocatalyst thus exhibits an excellent bifunctional ORR and OER performance, with a potential gap of only 0.71 V. The NiFe-LDH/Fe,N-CB-based RZAB exhibits an open-circuit voltage of 1.565 V and a specific capacity of 731 mAh g_Zn^-1, which is much better than the RZAB composed of Pt/C and IrO₂. Particularly, the NiFe-LDH/Fe,N-CB-based RZAB displays excellent long-term charging/discharging cyclic stability and rechargeability. Even at a large charging/discharging current density (20 mA cm^-2), the charging/discharging voltage gap is only ∼1.33 V and exhibits an increase smaller than 5% after 140 cycles. This work provides a new low-cost bifunctional ORR/OER electrocatalyst with high activity and superior long-term stability and will be helpful to the commercialization of RZAB in large scale.

Transition metal chalcogenides carbon-based as bifunctional cathode electrocatalysts for rechargeable zinc-air battery: An updated review

The rechargeable alkaline aqueous zinc-air batteries (ZABs) are prospective candidates to supply the energy demand for their high theoretical energy density, inherent safety, and environmental friendliness. However, their practical application is mainly restricted by the unsatisfactory efficiency of the air electrode, leading to an intense search for high-efficient oxygen electrocatalysts. In recent years, the composites of carbon materials and transition metal chalcogenides (TMC/C) have emerged as promising alternatives because of the unique properties of these single compounds and the synergistic effect between them. In this sense, this review presented the electrochemical properties of these composites and their effects on the ZAB performance. The operational fundamentals of the ZABs were described. After elucidating the role of the carbon matrix in the hybrid material, the latest developments in the ZAB performance of the monometallic structure and spinel of TMC/C were detailed. In addition, we report topics on doping and heterostructure due to the large number of studies involving these specific defects. Finally, a critical conclusion and a brief overview sought to contribute to the advancement of TMC/C in the ZABs.

Interfacial assembly of binary atomic metal-Nx sites for high-performance energy devices

Anion-exchange membrane fuel cells and Zn-air batteries based on non-Pt group metal catalysts typically suffer from sluggish cathodic oxygen reduction. Designing advanced catalyst architectures to improve the catalyst's oxygen reduction activity and boosting the accessible site density by increasing metal loading and site utilization are potential ways to achieve high device performances. Herein, we report an interfacial assembly strategy to achieve binary single-atomic Fe/Co-N_x with high mass loadings through constructing a nanocage structure and concentrating high-density accessible binary single-atomic Fe/Co-N_x sites in a porous shell. The prepared FeCo-NCH features metal loading with a single-atomic distribution as high as 7.9 wt% and an accessible site density of around 7.6 × 10¹⁹ sites g^-1, surpassing most reported M-N_x catalysts. In anion exchange membrane fuel cells and zinc-air batteries, the FeCo-NCH material delivers peak power densities of 569.0 or 414.5 mW cm^-2, 3.4 or 2.8 times higher than control devices assembled with FeCo-NC. These results suggest that the present strategy for promoting catalytic site utilization offers new possibilities for exploring efficient low-cost electrocatalysts to boost the performance of various energy devices.