Advancements in ionic liquid-based corrosion inhibitors for sustainable protection strategies: from experimental to computational insights

The global corrosion cost is estimated to be around 2.5 trillion USD, which is more than 3 % of the global GDP. Against this background, large efforts have been made to find effective corrosion inhibitors. Ionic liquids (ILs) are nowadays regarded as reliable functional materials and one of the most promising classes of anticorrosion agents. Not only are they efficient in preventing corrosion of iron and other metals, but they are also relatively inexpensive, need no solvents, and are non-toxic to humans This review addresses both experimental and theoretical investigations conducted to IL-based corrosion inhibitors (CIs). It covers various ILs used, synthesis methods, and their performance in diverse corrosive environments. Electrochemical techniques like EIS and potentiodynamic polarization, along with computational approaches including quantum chemical calculations and DFT, provide valuable insights into corrosion inhibition mechanisms and the interactions between anticorrosion agents-surfaces. The synergistic combination of experimental and theoretical approaches enhances our understanding of corrosion inhibition, enabling the design and optimization of effective and sustainable corrosion protection strategies. This review consolidates the existing knowledge on ionic liquid-based corrosion inhibitors, highlights the key findings from both experimental and theoretical investigations, and points out possible directions for further studies in this area.

Mechanisms of Biological Effects of Ionic Liquids: From Single Cells to Multicellular Organisms

The review presents a detailed discussion of the evolving field studying interactions between ionic liquids (ILs) and biological systems. Originating from molten salt electrolytes to present multiapplication substances, ILs have found usage across various fields due to their exceptional physicochemical properties, including excellent tunability. However, their interactions with biological systems and potential influence on living organisms remain largely unexplored. This review examines the cytotoxic effects of ILs on cell cultures, biomolecules, and vertebrate and invertebrate organisms. Our understanding of IL toxicity, while growing in recent years, is yet nascent. The established findings include correlations between harmful effects of ILs and their ability to disturb cellular membranes, their potential to trigger oxidative stress in cells, and their ability to cause cell death via apoptosis. Future research directions proposed in the review include studying the distribution of various ILs within cellular compartments and organelles, investigating metabolic transformations of ILs in cells and organisms, detailed analysis of IL effects on proteins involved in oxidative stress and apoptosis, correlation studies between IL doses, exposure times and resulting adverse effects, and examination of effects of subtoxic concentrations of ILs on various biological objects. This review aims to serve as a critical analysis of the current body of knowledge on IL-related toxicity mechanisms. Furthermore, it can guide researchers toward the design of less toxic ILs and the informed use of ILs in drug development and medicine.

Towards efficient and greener processes for furfural production from biomass: A review of the recent trends

As mentioned in several recent reviews, biomass-based furfural is attracting increasing interest as a feasible alternative for the synthesis of a wide range of non-petroleum-derived compounds. However, the lack of environmentally friendly, cost-effective, and sustainable industrial procedures is still evident. This review describes the chemical and biological routes for furfural production. The mechanisms proposed for the chemical transformation of xylose to furfural are detailed, as are the current advances in the manufacture of furfural from biomass. The main goal is to overview the different ways of improving the furfural synthesis process. A pretreatment process, particularly chemical and physico-chemical, enhances the digestibility of biomass, leading to the production of >70 % of available sugars for the production of valuable products. The combination of heterogeneous (zeolite and polymeric solid) catalyst and biphasic solvent system (water/GVL and water/CPME) is regarded as an attractive approach, affording >75 % furfural yield for over 80 % of selectivity with the possibility of catalyst reuse. Microwave heating as an activation technique reduces reaction time at least tenfold, making the process more sustainable. The state of the art in industrial processes is also discussed. It shows that, when sulfuric acid is used, the furfural yields do not exceed 55 % for temperatures close to 180 °C. However, the MTC process recently achieved an 83 % yield by continuously removing furfural from the liquid phase. Finally, the CIMV process, using a formic acid/acetic acid mixture, has been developed. The economic aspects of furfural production are then addressed. Future research will be needed to investigate scaling-up and biological techniques that produce acceptable yields and productivities to become commercially viable and competitive in furfural production from biomass.

Green Chemistry and Molecularly Imprinted Membranes

Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.

Sonochemical Protocols for Heterocyclic Synthesis: A Representative Review

In the present era of the industrial revolution, we all are familiar with ever-increasing environmental pollution released from various chemical processes. Chemical production has had a severe impact on the environment and human health. For the betterment of our environment, the chemical community has turned their interest to developing green, harmless and sustainable synthetic processes. To accomplish these goals of green chemistry, the extraordinary properties of sonication play an important role. It is well known that sonochemistry can make decisive contributions to creating high pressures of almost 1000 atm and very high temperatures in the range of 4500-5000 °C. The implementation of ultrasound in chemical transformations somehow fulfils the measures of green chemistry, as it reduces energy consumption, enhances product selectivity, and uses lesser amounts of hazardous chemicals and solvents. Furthermore, heterocyclic synthesis under ultrasonication offers several environmental and process-related advantages compared with conventional methods. The remarkable contribution of ultrasonics to the development of green and sustainable synthetic routes inspired us to write this article. Herein, we have discussed only some of the various synthetic methodologies developed for the construction of heterocyclic cores under ultrasonic irradiation, accompanied by mechanistic insights. In some cases, a comparison between sonochemical conditions and conventional conditions has also been investigated. We emphasized principally 'up to date' developments on various sono-accelerated chemical transformations comprising aza-Michael, aldol reactions, C-C couplings, oxidation, cycloadditions, multi-component reactions, etc. for the synthesis of heterocycles.

Ionic Liquids and Deep Eutectics as a Transformative Platform for the Synthesis of Nanomaterials

Ionic liquids (ILs) are becoming a revolutionary synthesis medium for inorganic nanomaterials, permitting more efficient, safer and environmentally benign preparation of high quality products. A smart combination of ILs and...

Ionic liquid-based antimicrobial materials for water treatment, air filtration, food packaging and anticorrosion coatings

Efforts to widen the scope of ionic liquids applications across diverse research areas have flourished in the last two decades with developments in understanding and tailoring their physical, chemical, and biological properties. The promising applications of ionic liquids-based materials as antimicrobial systems is due to their ability and flexibility to be tailored in varying sizes, morphologies, and surface charges. Ionic liquids are also considered as greener materials. Common methods for the preparation of ionic liquid-based materials include crosslinking, loading, grafting, and combination of ionic liquids with other polymeric materials. Recent research focuses on the tuning of the biological properties to design novel ionic liquids-based antimicrobial materials. Here, the properties, synthesis and applications of ionic liquids and ionic liquids-based materials are reviewed with focus on antimicrobial activities applied to water treatment, air filtration, food packaging, and anticorrosion.

Extraction of natural products using supercritical fluids and pressurized liquids assisted by ultrasound: Current status and trends

Natural products are a source of a wide range of chemical compounds, from pigments to bioactive compounds, which can be extracted and used in different applications. Due to consumer awareness, the interest in natural compounds significantly increased in the last decades, prompting the search for more efficient and environmentally friendly extraction techniques and methods. Pressurized liquids and fluids (sub and supercritical) are being explored to extract natural compounds within the green process concept. The combination of these techniques with ultrasound has emerged as an alternative to intensify the extraction process efficiently. In this context, this work presents a comprehensive review and current insights into the use of high-pressure systems, specifically supercritical fluid extraction and pressurized liquid extraction assisted by ultrasound, as emerging technologies for extracting bioactive compounds from natural products. The extraction mechanisms, applications, and the influence of operational parameters in the process are addressed, in addition to an analysis of the main challenges to be overcome for widespread application.

Concerns and breakthroughs of combining ionic liquids with microwave irradiation for the synthesis of Ru nanoparticles via decarbonylation

HYPOTHESIS

Combination of microwave irradiation (MWI) and ionic liquids (IL) is widely used for the synthesis of nanoparticles (NP) via decarbonylation of zero-valent metal carbonyl precursors. However, we carefully raise a question as to whether this combination is always beneficial. Upon MWI, highly-absorbing materials such as ILs would be subject to local intense heating, likely resulting in the occurrence of localized chemical decomposition. The decomposition is expected to influence the growth mechanism of NPs due to changes in the electrostatic and steric effects. If the assumption is valid, it should be possible to decompose IL and destabilize the NPs by modifying the amplitude of the incident microwaves. In other words, it should also be possible to control the particle aggregation by circumventing the decomposition of the IL.

EXPERIMENTS

A series of comparative studies were conducted using a model system (i.e. [BMIm][BF₄] and Ru₃(CO)₁₂). Variables were systematically controlled. After MWI, the decrease in colloidal stability of NPs was identified.

FINDINGS

In the formation of Ru NPs via decarbonylation, the association between incident microwave intensity, chemical decomposition of IL, and initiation of particle aggregation has been demonstrated. Conditions that can accelerate or alleviate the decomposition and the aggregation are also corroborated.

Acoustic cavitation events and solvation power of ionic liquid in a novel hybrid technique: A concept proposal toward a green pathway for cellulose decomposition

The present paper reports a numerical investigation of the feasibility of a hybrid concept associating the 1-Butyl-3-methylimidazolium Acetate [C4mim][CH3COO] to sonication, in terms of cavitation formation and generated extreme conditions allowing cellulose decomposition in the second reactivity site. The results of the proposed model revealed an acoustic power threshold of 1.8 atm, in order to expect a transient cavitation in the ionic liquid, leading to harsh conditions of 1559.8 K and 49 bar within the bulk volume of the acoustic cavitation bubble. The spatial and temporal variation of the temperature was simulated within the bulk volume of the bubble as well as in the thermal boundary layer jointly with the chemical kinetics. The first stage of the polymerization reduction was clearly attained and demonstrated through the decomposition rate of cellulose and the molar rate of emergence of anhydrocellulose, reaching the respective orders of magnitude of 1.71 × 104 mol/m3⋅s and 7.91 × 104 mol/m3⋅s.

Synergic effects of ultrasound and ionic liquids on fluconazole emulsion

The aim of this work was to evaluate the influence of US on the properties of the fluconazole emulsions prepared using imidazolium-based ILs ([C_n C₁im]Br). The effects of the preparation method (mechanical stirring or US), US amplitude, alkyl chain length (of [C₁₂C₁im]Br or [C₁₆C₁im]Br), and IL concentration on the physicochemical properties were evaluated. Properties such as droplet size, span index, morphology, viscosity encapsulation efficiency, and drug release profile were determined. The results showed that US-prepared emulsions had a smaller droplet size and smaller polydispersity (Span) than those prepared by mechanical stirring. Additionally, the results showed that emulsions prepared with [C₁₆C₁im]Br and US had spherical shapes and increased stability compared to emulsions prepared by MS, and also depended on the IL concentration. The emulsion prepared by US at 40% amplitude had increased encapsulation efficiency. US provided a decrease in the viscosity of emulsions containing [C₁₂C₁im]Br; however, in general, all emulsions had viscosity close to that of water. Emulsions containing [C₁₆C₁im]Br had the lowest viscosities of all the emulsions. The emulsions containing the IL [C₁₆C₁im]Br had more controlled release and a lower cumulative percentage of drug release. The IL concentration required to prepare these emulsions was lower than the amount of conventional surfactant required, which highlights the potential synergic effects of ILs and US in preparing emulsions of hydrophobic drugs.

Transforming lignocellulosic biomass into biofuels enabled by ionic liquid pretreatment

Processes that can convert lignocellulosic biomass into biofuels and chemicals are particularly attractive considering renewability and minimal environmental impact. Ionic liquids (ILs) have been used as novel solvents in the process development in that they can effectively deconstruct recalcitrant lignocellulosic biomass for high sugar yield and lignin recovery. From cellulose-dissolving ILs to choline-based and protic acidic ILs, extensive research in this field has been done, driven by the promising future of IL pretreatment. Meanwhile, shortcomings and technological hurdles are ascertained during research and developments. It is necessary to present a general overview of recent developments and challenges in this field. In this review paper, three aspects of advances in IL pretreatment are critically analyzed: biocompatible ILs, protic acidic ILs and combinatory pretreatments.

Synthesis of new pyridines with sulfonamide moiety via a cooperative vinylogous anomeric-based oxidation mechanism in the presence of a novel quinoline-based dendrimer-like ionic liquid

In the present study, we reported the synthesis of a novel quinoline-based dendrimer-like ionic liquid. After characterization of the mentioned ionic liquid with suitable techniques such as Fourier transform infrared spectroscopy (FT-IR), energy dispersive X-ray spectroscopy (EDX), elemental mapping, thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG), its catalytic performance was investigated in the synthesis of new pyridines with sulfonamide moiety via a cooperative vinylogous anomeric-based oxidation mechanism under mild reaction conditions. All target molecules were achieved in short reaction times and high yields.

Ultrasound for Drug Synthesis: A Green Approach

This last century, the development of new medicinal molecules represents a real breakthrough in terms of humans and animal life expectancy and quality of life. However, this success is tainted by negative environmental consequences. Indeed, the synthesis of drug candidates requires the use of many chemicals, solvents, and processes that are very hazardous, toxic, energy consuming, expensive, and generates a large amount of waste. Many large pharmaceutical companies have thus moved to using green chemistry practices for drug discovery, development, and manufacturing. One of them is the use of energy-efficient activation techniques, such as ultrasound. This review summarizes the latest most representative works published on the use of ultrasound for sustainable bioactive molecules synthesis.

Ethyl Butyrate Synthesis Catalyzed by Lipases A and B from Candida antarctica Immobilized onto Magnetic Nanoparticles. Improvement of Biocatalysts' Performance under Ultrasonic Irradiation

The synthesis of ethyl butyrate catalyzed by lipases A (CALA) or B (CALB) from Candida antarctica immobilized onto magnetic nanoparticles (MNP), CALA-MNP and CALB-MNP, respectively, is hereby reported. MNPs were prepared by co-precipitation, functionalized with 3-aminopropyltriethoxysilane, activated with glutaraldehyde, and then used as support to immobilize either CALA or CALB (immobilization yield: 100 ± 1.2% and 57.6 ± 3.8%; biocatalysts activities: 198.3 ± 2.7 U_p-NPB/g and 52.9 ± 1.7 U_p-NPB/g for CALA-MNP and CALB-MNP, respectively). X-ray diffraction and Raman spectroscopy analysis indicated the production of a magnetic nanomaterial with a diameter of 13.0 nm, whereas Fourier-transform infrared spectroscopy indicated functionalization, activation and enzyme immobilization. To determine the optimum conditions for the synthesis, a four-variable Central Composite Design (CCD) (biocatalyst content, molar ratio, temperature and time) was performed. Under optimized conditions (1:1, 45 °C and 6 h), it was possible to achieve 99.2 ± 0.3% of conversion for CALA-MNP (10 mg) and 97.5 ± 0.8% for CALB-MNP (12.5 mg), which retained approximately 80% of their activity after 10 consecutive cycles of esterification. Under ultrasonic irradiation, similar conversions were achieved but at 4 h of incubation, demonstrating the efficiency of ultrasound technology in the enzymatic synthesis of esters.

Solvent-free sonochemistry as a route to pharmaceutical co-crystals

We describe the synthesis of pharmaceutically relevant co-crystals by solvent-free sonochemistry starting from solid reagents. Employing a standard ultrasonic cleaning bath, quantitative conversions occurred within 20-60 minutes to give co-crystals of paracetamol and aspirin with a range of co-formers. As well as the utility of the method, the work raises interesting mechanistic questions regarding acoustic cavitation with no liquid phase being present.

Phytochemical and pharmacological attributes of piperine: A bioactive ingredient of black pepper

Plants are vital for the wellbeing of humankind in a variety of ways. Some plant extracts contain antimicrobial properties that can treat different pathogens. Most of the world's population relies on medicinal plants and natural products for their primary health care needs. Therefore, there is a growing interest in natural products, medicinal plants, and traditional medicine along with a desire to design and develop novel plant-based pharmaceuticals. These plant-based pharmaceuticals may address the concerns of reduced efficacy of synthetic antibiotics due to the emergence of drug-resistant pathogens. In this regard, some plant extracts from black pepper (Piper nigrum) with antimicrobial properties, including piperine, have the potential to be used as natural dietary supplements together with modern therapeutic approaches. This review highlights possible applications of piperine as the active compound in the fields of rational drug design and discovery, pharmaceutical chemistry, and biomedicine. We discuss different extraction methods and pharmacological effects of the analyzed substance to pave the way for further research strategies and perspectives towards the development of novel herbal products for better healthcare solutions.

Sonochemically assisted 2,3-dideoxygenation and skeletal rearrangement of ecdysteroid derivatives

Sonochemical 2,3-dideoxygenation of ecdysteroids with the Δ ²⁽³⁾-bond generation and activation of the C-C bonds of the steroid core in the poststerone derivatives, that causes the skeletal rearrangement have been carried out for the first time. Thus, the ultrasonically assisted reaction of 2,3-dimesyloxy derivatives of ecdysteroids with the NaI-Zn-DMF system gives rise to their 2,3-dideoxy-Δ²⁽³⁾-analogues with yields 70-92%. In the case of 2,3-dimesyloxypoststerone as the initial ecdysteroid substrate the reaction is accompanied by the activation of the allyl moiety and semipinacol rearrangement, resulting in the C¹³-C¹⁴ bond migration with C/D rings contraction/expansion and providing novel short chain (8R)-13(14 → 8)-abeo-isomer.

Efficient Nucleophilic Degradation of an Organophosphorus Pesticide "Diazinon" Mediated by Green Solvents and Microwave Heating

An efficient strategy for the degradation of organophosphate pesticide Diazinon was investigated. In this work, ionic liquids, bio-based solvents, and two conventional organic solvents were used as reaction media. Kinetics studies by means of half-life (t_1/2,h) were followed by ³¹P NMR and the products analyzed by GC-MS, HPLC-MS and NMR techniques. These results have shown that t_1/2 values in ionic liquids were the lowest and also they were able to activate two electrophilic centers in Diazinon, whilst degradation in bio-based solvents occurred slowly by only an aromatic pathway. In addition, a study to estimate the influence of green activation techniques was carried out by using Ultrasound irradiation and Microwave heating in combination with greener solvents and two conventional organic solvents. Under Microwave heating, faster degradation than under ultrasound irradiation was found. Finally, considering both families of solvent used here and their behavior under green activation techniques, we propose that the more efficient way for degradation of Diazinon with piperidine is by microwave heating using ionic liquids as solvents.

Mediated electrochemical synthesis of metal nanoparticles

The review integrates and analyzes data of original studies on the mediated electrosynthesis of metal nanoparticles — a new efficient and environmentally attractive process for obtaining these particles in the solution bulk. The general principles and specific features of electrosynthesis of metal nanoparticles by mediated electroreduction of metal ions and complexes are considered. The discussed issues include the role of cyclic voltammetry in the development of this method, the method efficiency, some aspects of selection of mediators, and aggregation, stabilization and catalytic activity of the metal nanoparticles thus obtained. Analysis of the results of mediated electrosynthesis of Pd, Ag, PdAg, Au, Pt and Cu nanoparticles stabilized by various compounds and mediated electrogeneration of highly active metal particles is used as basic data for discussion.

The bibliography includes 247 references.

Acoustic cavitation in 1-butyl-3-methylimidazolium bis(triflluoromethyl-sulfonyl)imide based ionic liquid

In this work, a comparison between the temperatures/pressures within acoustic cavitation bubble in an imidazolium-based room-temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium bis(triflluoromethyl-sulfonyl)imide ([BMIM][NTf₂]), and in water has been made for a wide range of cavitation parameters including frequency (140-1000kHz), acoustic intensity (0.5-1Wcm^-2), liquid temperature (20-50°C) and external static pressure (0.7-1.5atm). The used cavitation model takes into account the liquid compressibility as well as the surface tension and the viscosity of the medium. It was found that the bubble temperatures and pressures were always much higher in the ionic liquid compared to those predicted in water. The valuable effect of [BMIM][NTf₂] on the bubble temperature was more pronounced at higher acoustic intensity and liquid temperature and lower frequency and external static pressure. However, confrontation between the predicted and the experimental estimated temperatures in ionic liquids showed an opposite trend as the temperatures measured in some pure ionic liquids are of the same order as those observed in water. The injection of liquid droplets into cavitation bubbles, the pyrolysis of ionic liquids at the bubble-solution interface as well as the lower number of collapsing bubbles in the ionic liquid may be the responsible for the lower measured bubble temperatures in ionic liquids, as compared with water.

Effect of water and ionic liquids on biomolecules

The remarkable progress in the field of ionic liquids (ILs) in the last two decades has involved investigations on different aspects of ILs in various conditions. The nontoxic and biocompatible nature of ILs makes them a suitable substance for the storage and application of biomolecules. In this regard, the aqueous IL solutions have attracted a large number of studies to comprehend the role of water in modulating various properties of biomolecules. Here, we review some of the recent studies on aqueous ILs that concern the role of water in altering the behavior of ILs in general and in case of biomolecules solvated in ILs. The different structural and dynamic effects caused by water have been highlighted. We discuss the different modes of IL interaction that are responsible for stabilization and destabilization of proteins and enzymes followed by examples of water effect on this. The role of water in the case of nucleic acid storage in ILs, an area which has mostly been underrated, also has been emphasized. Our discussions highlight the fact that the effects of water on IL behavior are not general and are highly dependent on the nature of the IL under consideration. Overall, we aim to draw attention to the significance of water dynamics in the aqueous IL solutions, a better understanding of which can help in developing superior storage materials for application purposes.

Ionic liquid syntheses via click chemistry: expeditious routes toward versatile functional materials

The application of click reaction (e.g. CuAAC, thiol–X, oxime formation and nucleophilic ring opening) has recently begun to draw attention for efficient and robust synthesis of new functional ionic liquids, requiring minimal purification.

Ultrasound-assisted acid hydrolysis of cellulose to chemical building blocks: Application to furfural synthesis

In this work, the use of ultrasound energy for the production of furanic platforms from cellulose was investigated and the synthesis of furfural was demonstrated. Several systems were evaluated, as ultrasound bath, cup horn and probe, in order to investigate microcrystalline cellulose conversion using simply a diluted acid solution and ultrasound. Several acid mixtures were evaluated for hydrolysis, as diluted solutions of HNO₃, H₂SO₄, HCl and H₂C₂O₄. The influence of the following parameters in the ultrasound-assisted acid hydrolysis (UAAH) were studied: sonication temperature (30 to 70°C) and ultrasound amplitude (30 to 70% for a cup horn system) for 4 to 8molL^-1 HNO₃ solutions. For each evaluated condition, the products were identified by ultra-performance liquid chromatography with high-resolution time-of-flight mass spectrometry (UPLC-ToF-MS), which provide accurate information regarding the products obtained from biomass conversion. The furfural structure was confirmed by nuclear magnetic resonance (¹H and ¹³C NMR) spectroscopy. In addition, cellulosic residues from hydrolysis reaction were characterized using scanning electron microscopy (SEM), which contributed for a better understanding of physical-chemical effects caused by ultrasound. After process optimization, a 4molL^-1 HNO₃ solution, sonicated for 60min at 30°C in a cup horn system at 50% of amplitude, lead to 78% of conversion to furfural. This mild temperature condition combined to the use of a diluted acid solution represents an important contribution for the selective production of chemical building blocks using ultrasound energy.

DABCO-catalyzed Knoevenagel condensation of aldehydes with ethyl cyanoacetate using hydroxy ionic liquid as a promoter

N-(2-Hydroxy-ethyl)-pyridinium chloride ([HyEtPy]Cl) was synthesized and explored as a novel promoter for 1,4-diazabicyclo [2.2.2] octane (DABCO)-catalyzed Knoevenagel condensation reactions, which showed better catalytic activity compared to other ionic liquid (IL) that had no hydroxyl group attached to the IL scaffold. The effect of hydrogen bond formation between the hydroxyl group of [HyEtPy]Cl and the carbonyl group of aldehyde played an important role in the Knoevenagel condensation reaction. In the [HyEtPy]Cl–H₂O–DABCO composite system, Knoevenagel condensation reactions proceeded smoothly and cleanly, and the corresponding Knoevenagel condensation products were obtained in good to excellent yields in all cases examined. This protocol provides a versatile solvent–catalyst system, which has notable advantages such as being eco-friendly, ease of work-up and convenient reuse of the ionic liquid.

N-(2-Hydroxy-ethyl)-pyridinium chloride ([HyEtPy]Cl) was synthesized and explored as a novel promoter for 1,4-diazabicyclo [2.2.2] octane (DABCO)-catalyzed Knoevenagel condensation reactions, excellent catalytic activity was obtained.

How sonochemistry contributes to green chemistry?

Based on the analyses of papers from the literature, and especially those published in Ultrasonics Sonochemistry journal, the contribution of sonochemistry to green chemistry area has been discussed here. Important reminders and insights on the good practices and considerations have been made to understand and demonstrate how sonochemistry can continue to efficiently contribute to green chemistry area in the further studies.

Synthesis, Functionalization, and Design of Magnetic Nanoparticles for Theranostic Applications

In order to translate nanotechnology into medical practice, magnetic nanoparticles (MNPs) have been presented as a class of non-invasive nanomaterials for numerous biomedical applications. In particular, MNPs have opened a door for simultaneous diagnosis and brisk treatment of diseases in the form of theranostic agents. This review highlights the recent advances in preparation and utilization of MNPs from the synthesis and functionalization steps to the final design consideration in evading the body immune system for therapeutic and diagnostic applications with addressing the most recent examples of the literature in each section. This study provides a conceptual framework of a wide range of synthetic routes classified mainly as wet chemistry, state-of-the-art microfluidic reactors, and biogenic routes, along with the most popular coating materials to stabilize resultant MNPs. Additionally, key aspects of prolonging the half-life of MNPs via overcoming the sequential biological barriers are covered through unraveling the biophysical interactions at the bio-nano interface and giving a set of criteria to efficiently modulate MNPs' physicochemical properties. Furthermore, concepts of passive and active targeting for successful cell internalization, by respectively exploiting the unique properties of cancers and novel targeting ligands are described in detail. Finally, this study extensively covers the recent developments in magnetic drug targeting and hyperthermia as therapeutic applications of MNPs. In addition, multi-modal imaging via fusion of magnetic resonance imaging, and also innovative magnetic particle imaging with other imaging techniques for early diagnosis of diseases are extensively provided.

Green Ultrasound versus Conventional Synthesis and Characterization of Specific Task Pyridinium Ionic Liquid Hydrazones Tethering Fluorinated Counter Anions: Novel Inhibitors of Fungal Ergosterol Biosynthesis

A series of specific task ionic liquids (ILs) based on a pyridiniumhydrazone scaffold in combination with hexafluorophosphate (PF₆-), tetrafluoroboron (BF₄-) and/or trifluoroacetate (CF₃COO-) counter anion, were designed and characterized by IR, NMR and mass spectrometry. The reactions were conducted under both conventional and green ultrasound procedures. The antifungal potential of the synthesized compounds 2-25 was investigated against 40 strains of Candida (four standard and 36 clinical isolates). Minimum inhibitory concentrations (MIC90) of the synthesized compounds were in the range of 62.5-2000 μg/mL for both standard and oral Candida isolates. MIC90 results showed that the synthesized 1-(2-(4-chlorophenyl)-2-oxoethyl)-4-(2-(4-fluorobenzylidene)hydrazinecarbonyl)-pyridin-1-ium hexafluorophosphate (11) was found to be most effective, followed by 4-(2-(4-fluorobenzylidene)hydrazinecarbonyl)-1-(2-(4-nitrophenyl)-2-oxoethyl)-pyridin-1-ium hexafluorophosphate (14) and 1-(2-ethoxy-2-oxoethyl)-4-(2-(4-fluorobenzylidene)hydrazinecarbonyl)pyridin-1-ium hexafluorophosphate (8). All the Candida isolates showed marked sensitivity towards the synthesized compounds. Ergosterol content was drastically reduced by more active synthesized compounds, and agreed well with MIC90 values. Confocal scanning laser microscopy (CLSM) results showed that the red colored fluorescent dye enters the test agent treated cells, which confirms cell wall and cell membrane damage. The microscopy results obtained suggested membrane-located targets for the action of these synthesized compounds. It appears that the test compounds might be interacting with ergosterol in the fungal cell membranes, decreasing the membrane ergosterol content and ultimately leading to membrane disruption as visible in confocal results. The present study indicates that these synthesized compounds show significant antifungal activity against Candida which forms the basis to carry out further in vivo experiments before their clinical use.