Chelation technology: a promising green approach for resource management and waste minimization

Design and construction of magnetic nanomaterials and their remediation mechanisms for heavy metal contaminated soil

Soil heavy metal pollution poses huge threat to ecosystem and human health. In-situ chemical remediation aims to immobilize free heavy metals in soil through adding passivators, thereby greatly reducing the mobility and bioavailability of heavy metals. Magnetic nanomaterials (MaN) have strong adsorption and immobilization capabilities for heavy metals due to their significant surface effects, small size effects and interfacial effects. Compared with traditional remediation materials, MaN can be recovered and reused using external magnetic fields. These advantages give MaN broad application prospects in the field of soil remediation. This work provides a comprehensive review of the application of MaN in heavy metal contaminated soil, including the design and application effect of various types of MaN, the influence of MaN on soil properties, environmental toxicity, and microbial composition, the in-situ remediation mechanism of MaN on heavy metal contaminated soil. On the other hand, there are potential risks associated with the remediation of heavy metal contaminated soil using MaN, including their impact on the soil ecosystem and biosafety concerns, requiring further research. Finally, this review proposes the future prospects for the application of MaN in the remediation of heavy metal polluted soil.

A review on e-waste contamination, toxicity, and sustainable clean-up approaches for its management

Ecosystems and human health are being negatively impacted by the growing problem of electrical waste, especially in developing countries. E-waste poses a significant risk to ecological systems because it can release a variety of hazardous substances into the environment, containing polybrominated diphenyl ethers and heavy metals, brominated flame retardants, polychlorinated dibenzofurans and polycyclic aromatic hydrocarbons, and dioxins. This review article provides a critical assessment of the toxicological consequences of e-waste on ecosystems and human health and data analyses from scientific journals and grey literature on metals, BFRs, PBDEs, PCDFs, and PAHs in several environmental compartments of commercial significance in informal electronic trash recycling. The currently available techniques and tools employed for treating e-waste are sustainable techniques such as bioremediation, chemical leaching, biological leaching, and pyrometallurgy have been also discussed along with the necessity of implementing strong legislation to address the issue of unregulated exports of electronic trash in recycling practices. Despite the ongoing hurdles, implementing environmentally sustainable recycling methods have the potential to address the detrimental impacts of e-waste and foster positive economic development.

GLDA exhibits advantages in the phytoextraction of Cd and Ni in land-applied municipal sludge

Landscape utilization is a green and environment-friendly way of disposing of compost sludge. Garden plants can extract heavy metals from the sludge of land use, but the effect is not enough to be widely used. Chelating agents have been found to facilitate the extraction of heavy metals from plants and are expected to be popularized if they are also environmentally friendly. In this study, the effects of methylglycinediacetic acid trisodium salt (MGDA), tetrasodium glutamate diacetate (GLDA), and ethylene diamine tetraacetate (EDTA) on the extraction of Ni and Cd from compost sludge by Symphytum officinale L. were studied through the pot experiment. Compared with the control group, the application of 5-10 mmol kg-1 MGDA and 1-9 mmol kg-1 GLDA promoted plant growth, while the application of 3-4 mmol kg-1 EDTA inhibited plant growth. The highest Ni content in shoots appeared in 4 mmol kg-1 GLDA treatment, which was 4.2 times that of the CK group. The highest shoot Cd concentration appeared in 4 mmol kg-1 EDTA treatment, 6.5 times that of CK. The promotion effects of the three reagents on the acid-extractable state of Cd were similar, while that of GLDA on the acid-extractable state of Ni was outstanding. The results of this study suggested that S. officinale could be a potential phytoextraction plant for Cd and Ni, and GLDA could friendly promote the Ni phytoextraction ability of the plant. The study provides a new and efficient method for phytoremediation of heavy metals in soil.

Differential Effects of Histidine and Histidinamide versus Cysteine and Cysteinamide on Copper Ion-Induced Oxidative Stress and Cytotoxicity in HaCaT Keratinocytes

Metal chelators are used for various industrial and medical purposes based on their physicochemical properties and biological activities. In biological systems, copper ions bind to certain enzymes as cofactors to confer catalytic activity or bind to specific proteins for safe storage and transport. However, unbound free copper ions can catalyze the production of reactive oxygen species (ROS), causing oxidative stress and cell death. The present study aims to identify amino acids with copper chelation activities that might mitigate oxidative stress and toxicity in skin cells exposed to copper ions. A total of 20 free amino acids and 20 amidated amino acids were compared for their copper chelation activities in vitro and the cytoprotective effects in cultured HaCaT keratinocytes exposed to CuSO4. Among the free amino acids, cysteine showed the highest copper chelation activity, followed by histidine and glutamic acid. Among the amidated amino acids, cysteinamide showed the highest copper chelation activity, followed by histidinamide and aspartic acid. CuSO4 (0.4–1.0 mM) caused cell death in a concentration-dependent manner. Among the free and amidated amino acids (1.0 mM), only histidine and histidinamide prevented the HaCaT cell death induced by CuSO4 (1.0 mM). Cysteine and cysteinamide had no cytoprotective effects despite their potent copper-chelating activities. EDTA and GHK-Cu, which were used as reference compounds, had no cytoprotective effects either. Histidine and histidinamide suppressed the CuSO4-induced ROS production, glutathione oxidation, lipid peroxidation, and protein carbonylation in HaCaT cells, whereas cysteine and cysteinamide had no such effects. Bovine serum albumin (BSA) showed copper-chelating activity at 0.5–1.0 mM (34–68 mg mL−1). Histidine, histidinamide, and BSA at 0.5–1.0 mM enhanced the viability of cells exposed to CuCl2 or CuSO4 (0.5 mM or 1.0 mM) whereas cysteine and cysteinamide had no such effects. The results of this study suggest that histidine and histidinamide have more advantageous properties than cysteine and cysteinamide in terms of alleviating copper ion-induced toxic effects in the skin.

Effect of different amounts of fruit peel-based activator combined with phosphate-solubilizing bacteria on enhancing phytoextraction of Cd from farmland soil by ryegrass

To improve the uptake of heavy metals by plants and increase the effectiveness of phytoextraction, chelating agents are employed to change the speciation of heavy metals in soil and increase their bioavailability. However, the effect of a single activator is limited. In recent years, compound activators have been applied widely to improve phytoextraction efficiency. In this study, a fruit peel-based activator (OG) was prepared, containing a mixture of orange peel extracts and tetrasodium glutamate diacetate (GLDA) (1.6% v/v) in a ratio of 1:1 (v/v). The pot experiment was used to investigate the effects of different amounts of OG combined with phosphate-solubilizing bacteria (Acinetobacter pitti, AP) on the extraction of Cd from farmland soil by ryegrass (Lolium perenne L). The results indicated that the addition of OG and AP increased the pH and EC of the soil and improved the content of nutrient elements in the soil. The optimal combination of the application rates of OG and AP improved the growth of ryegrass and enhanced the phytoextraction of Cd. Redundancy analysis (RDA) showed that total soil nitrogen had the greatest influence on phytoextraction, with a contribution rate of 85.3%, followed by pH, with a contribution rate of 7.7%. Total nitrogen, pH, available phosphorus, alkaline nitrogen, and total organic matter were correlated positively with plant Cd, soil Cd decrease ratio, and the bioaccumulation factor but negatively with total Cd and available Cd. Based on the findings of this study, it is feasible to apply the fruit peel-based activator (amended with GLDA) and phosphate-solubilizing bacteria to enhance phytoextraction of Cd, which will provide a valuable reference for the treatment of heavy metal-contaminated soils and the reutilization of fruit peel waste. When applying the compound activator, it is recommended to consider the influence of the additional amount of compound activator on the extraction efficiency.

Development of a novel chelation-based recycling strategy for the efficient decontamination of hazardous petroleum refinery spent catalysts

The conventional hydrometallurgical methods for recycling refinery spent hydroprocessing catalysts are ineffective in simultaneously removing all metals (Ni, V, and Mo) in a single-stage operation. In this study, a novel octadentate chelating agent, diethylenetriaminepentaacetic acid (DTPA-C₁₄H₂₃N₃O₁₀), has been proposed for the first time to remove toxic metals (Ni, V, and Mo) in a single stage of operation from an industrial spent atmospheric residue desulfurization (ARDS) catalysts. It was discovered that the efficient formation of metal-DTPA complexes was attained under the optimum experimental conditions (60 °C, stirring - 150 rpm, S/L ration (w/v) of 2.5%, 7.5% DTPA, and medium pH-9) that resulted in the high removal of Mo (83.6%), V (81.3%) and Ni (64.1%) from the spent ARDS catalyst. Kinetic studies suggest that the leaching process followed a semi-empirical Avrami equation (R² > 0.92), which predicted that the diffusion control reaction controlled the leaching. Species distribution and ecological risk analysis of the remaining metals in the insoluble residue (mostly Al₂O₃) indicated that the potential bioavailability of the remaining metals (except Ni) was significantly decreased, and residue poses a low ecological and contamination risk (individual contamination factor <1). Furthermore, the textural properties of the residue (BET surface area-103 m²/g and pore volume- 0.49 ml/g) were dramatically improved, suggesting that fresh hydroprocessing catalyst support can be synthesized using the leached residue. Compared to the conventional processes, the proposed chelating process is highly selective, closed-loop, and achieved high metal recovery in a single-stage operation while decreasing the environmental risks of the hazardous spent catalysts.

Development and validation of UV chromatographic method for quantification of copper and copper nanoparticles in different matrices and pharmaceutical products

Background

The applications of Cu and CuNPs based on the earth-abundant and inexpensive Cu metal have generated a great deal of interest in recent years, including medical applications. A novel, specific, precise, accurate and sensitive reverse-phase high-performance liquid chromatography (RP-HPLC) method with UV detection has been developed and validated to quantify copper (Cu) and copper nanoparticles (CuNPs) in different biological matrices and pharmaceutical products.

Methods

The developed method has been validated for linearity, precision, sensitivity, specificity and accuracy. Cu concentration was detected in pharmaceutical products without an extraction process. Moreover, liver, serum and muscle tissues were used as biological matrices. High Cu recovery in biological samples was afforded by using citric acid as a green chelating agent, exact extraction time and pH adjustment. Cu pharmaceutical and biological samples were eluted by acetonitrile: ammonium acetate (50 mM) with 0.5 mg/ml EDTA (30:70 v:v) as an isocratic mobile phase. EDTA reacted with Cu ions forming a Cu-EDTA coloured complex, separated through the C18 column and detected by UV at 310 nm.

Results

The developed method was specific with a short retention time of 4.95 min. It achieved high recovery from 100.3% to 109.9% in pharmaceutical samples and 96.8–105.7% in biological samples. The precision RSD percentage was less than two. The method was sensitive by achieving low detection limits (DL) and quantification limits (QL).

Conclusion

The validated method was efficient and economical for detecting Cu and CuNPs by readily available chemicals as EDTA and Citric acid with C18 column, which present the best results on RP-HPLC.

Bioleaching of Heavy Metals from Printed Circuit Boards with an Acidophilic Iron-Oxidizing Microbial Consortium in Stirred Tank Reactors

In this study, bioleaching was carried out for the recovery of metals (copper, zinc, tin, lead, gold and silver) from printed circuit boards residues (PCBs), one of the most important wastes from electrical and electronic equipment, using an acidophilic iron-oxidizing bacterial consortium enriched with minerals from a gold mine in the Arequipa region, Peru. High-throughput sequencing and analysis of the 16S rRNA biomarker revealed that this consortium was predominantly composed of Tissierella, Acidiphilium and Leptospirillum bacteria, from which the latter is known to grow by chemolithotrophy through iron oxidation. After the enrichment process, the acidophilic iron-oxidizing consortium was first tested for its tolerance to different PCBs concentrations, showing best growth up to 10 g/L of PCBs and a tolerance index of 0.383. Based on these results, the bioleaching efficiency of the consortium was investigated for 10 g/L of PCBs in stirred tank reactors coupled to an aeration system, for 18 days. High bioleaching efficiencies were achieved for copper and zinc (69% and 91%, respectively), indicating that these two metals can be easily extracted in this leaching system. Lower extraction efficiencies were achieved for tin (16%) and gold (28%), while for lead and silver only a residual recovery (<0.25%) was detected. These results indicate that the enriched bacterial consortium originating from the Arequipa region, Peru, has a high capacity to recover different metals of economic importance.

Enhancing phytoremediation of soils polluted with heavy metals

Environmental pollution with heavy metals continues to affect soil quality and crops yields. Among remediation solutions, biotechnology offers a number of environmentally friendly options, one of which is phytoremediation. The use of plants as hyperaccumulators for heavy metal ions is beneficial in terms of feasibility, costs, but has the disadvantage that plants may be affected by heavy metals toxicity. Also, heavy metals are often found in soil in less bioavailable forms to be extracted by plant roots. To overcome these shortcomings, various techniques have been proposed to intensify and accelerate the phytoremediation. They are analyzed and concisely described in this paper, emphasizing how these techniques can act to increase plant tolerance to the toxicity of heavy metal ions and can change the conditions in the rhizosphere area to favor heavy metals extraction and the transport in the roots and their translocation towards the aerial parts of the plant.

Efficient recovery of Cu and Ni from WPCB via alkali leaching approach

The large generation of electronic waste (e-waste) is posing a serious threat to society. It is important to develop sustainable technology for the effective management of e-waste and the recovery of valuable metals from it. The present study employed hydrometallurgical approach for Cu and Ni extraction from waste printed circuit boards (WPCB) of mobile phones. This study demonstrates the application of ammonia-ammonium sulfate leaching for the maximum recovery of Cu and Ni. Investigations revealed that the most favourable reaction parameters for efficient metal extraction are - ammonia concentration - 90 g/L, ammonium sulfate concentration - 180 g/L, H₂O₂ concentration - 0.4 M, time - 4 h, liquid to solid ratio - 20 mL/g, temperature - 80 °C and agitation speed - 700 rpm. Under these conditions, 100% Cu and 90% Ni were extracted. Furthermore, the kinetic study was performed using the shrinking core model which revealed that the internal diffusion is the rate-controlling step for Cu and Ni extraction. The activation energies for Cu and Ni extraction were found out to be 4.5 and 5.7 kJ/mol, respectively. Finally, Cu was recovered with 98.38% purity using electrowinning at a constant DC voltage of 2.0 V at Al cathode. The present study provides a solution for concurrent extraction of Cu and Ni from the raw WPCB of mobile phones and selective recovery of Cu from metal leached solution. The process has the potential to recover the resources from WPCB while minimising the pollution caused by mismanagement of WPCB.

Experimental and Numerical studies on remediation of mixed metal-contaminated sediments by electrokinetics focusing on fractionation changes

Electrokinetic remediation technique is widely applied for the removal of heavy metal from contaminated soil, but the soil buffering capacity and fractionation of heavy metals mainly affect the cost and duration of the treatment. This study aims to treat heavy metal-contaminated sediments by electrokinetic remediation (EKR) technique by using various enhancing agents such as EDTA, [Formula: see text], HCI, [Formula: see text], acetic acid and citric acid for optimizing the cost and treatment duration. The optimum molar concentration of enhancing agent for treatment was estimated by batch experiments to maximize the dissolution of target heavy metals and reduce the dissolution of earth metals (Fe, Al and Ca) to maintain soil health. The EKR experiments were performed up to 15 days with the above enhancing agents to reduce the risk associated with heavy metals and the selection of enhancing agents based on removal efficiency was found to be in an order of EDTA > citric acid > acetic acid > [Formula: see text] > HCl [Formula: see text] [Formula: see text]. Also, a numerical model has been developed by incorporating main electrokinetic transport phenomena (electromigration and electroosmosis) and geochemical processes for the prediction of treatment duration and to scale up the EKR process. The model predicts well with experimental heavy metal removal with a MAPD of [Formula: see text] 2-18 %. The parametric study on electrode distance for full-scale EKR treatment was found in this study as [Formula: see text] 0.5 m.

The addition of degradable chelating agents enhances maize phytoremediation efficiency in Cd-contaminated soils

Chelating agent-induced phytoremediation is a viable approach to completely remove heavy metals from soil. However, little attention has been paid to the interaction mechanisms between the concentration of the chelating agent and the application time on the physiological and biochemical properties of soil and plants. In this study, five chelating agents, namely ethylenediamine tetraacetic acid (EDTA), diethylenetriacetic acid (NTA), tetrasodium N, N-diacetate (GLDA), aspartate dibutyric acid ether (AES), and iminodisuccinic acid (IDSA), were used to support phytoremediation with maize and to explore the removal effect of Cd in soil. The results showed that chelating agent concentrations of 9 mmol kg^-1 significantly reduced the biomass of maize. Treatment with AES at a dose of 6 mmol kg^-1 significantly increased aboveground biomass, reaching a maximum of 0.92 g pot^-1 in all treatments. At an AES concentration of 6 mmol kg^-1, the highest shoot and root Cd levels of 7.79 and 9.86 mg kg^-1, respectively, were observed, which were 3.05 and 1.60 times higher than those of the control. Total Cd extraction followed the order AES (6 mmol kg^-1) > GLDA > NTA > EDTA > IDSA (3 mmol kg^-1). Chelating agent treatment significantly increased the activity of antioxidant enzymes and promoted plant growth. The self-degradation of AES significantly reduced soil pH, increased soil Cd activity, and promoted Cd uptake and transportation in maize.

Metallurgical processes unveil the unexplored "sleeping mines" e- waste: a review

The aim of this review paper is to critically analyze the existing studies on waste electric and electronic equipment (WEEE), which is one of the most increasing solid waste streams. This complex solid waste stream has pushed many scientific communities to develop novel technologies with minimum ecological disturbance. Noteworthy amount of valuable metals makes e-waste to a core of "urban mining"; therefore, it warrants special attention. Present study is focused on all the basic conceptual knowledge of WEEE ranging from compositional analysis, global statistics of e-waste generation, and metallurgical processes applied for metals extraction from e-waste. This review critically analyses the existing studies to emphasize on the heterogeneity nature of e-waste, which has not been focused much in any of the existing review articles. Comprehensive analysis of conventional approaches such as pyrometallurgy and hydrometallurgy reveals that high costs and secondary pollution possibilities limit the industrial feasibilities of these processes. Therefore biohydrometallurgy, a green technology, has been attracting researchers to focus on this novel technique to implement it for metal extraction from WEEE.

Recovery of the biological function of ethylenediaminetetraacetic acid-washed soils: Roles of environmental variations and microbes

To understand the recovery of the biological functions of washed soil, we studied changes in the microbial communities of soils washed with 10 or 60 mmol kg^-1 ethylenediaminetetraacetic acid (EDTA) for 90 d of incubation. The relative abundance of tolerant or degrading species decreased, while that of microorganisms with chemical autotrophic ability increased as the incubation time increased. The changes in the enzyme activity followed different trends. As an intracellular enzyme, dehydrogenase was initially most severely damaged by the washing process but could recover over time, while the activity of urease increased after washing with EDTA, which may be related to the use of N as a nutrient source by microorganisms. Phosphatase did not significantly change over time. The redundancy discriminant analyses indicated that there were distinct factors driving such changes in the soils washed with different EDTA dosages. For the soil washed with 10 mmol kg^-1 EDTA, bacteria with tolerance or degradation capacity of toxic pollutants, such as Nocardioidaceae, played a more important role in the recovery of soil functions; therefore, the EDTA stress indicator was the main driving factor. However, in the soil washed with 60 mmol kg^-1 EDTA, chemolithoautotrophic bacteria, such as Nitrososphaeraceae, exerted a greater influence on the recovery of biological functions due to the higher loss of nutrients and EDTA residue; therefore, the main driving factor was the nutrients supply.

Inconsistencies of e-waste management in developing nations - Facts and plausible solutions

Electronic and electrical equipment (EEE) became an integral part of daily life and had an immense influence on the economy. The skyrocketing demand, progressive technologies, and high dependency resulted in inconceivable utilization of EEE. However, these scientific expansions shortened the life span of EEE, thereby generating massive volumes of waste electronic and electrical equipment (WEEE). On a global perspective, Oceania generates a per capita of 17.3 kg/inh (inhabitants), followed by Europe 16.6 kg/inh, America 11.6 kg/inh, Asia 4.2 kg/inh and the least contribution by Africa 1.9 kg/inh. As known, EEE comprises complex metallic and non-metallic fractions causing severe discrepancies within the ecosystem, endangering the living species; if not dealt with properly. Thus, there is a pressing need of immediate addressal on the effective e-waste management strategies both from developed and developing countries. On the spin side, the separation of the precious fractions from the EEE on the end-of-life may be a twin dimensional strategy of economic addition, and plummeting the alarming level threats to ecology. However, these menaces are well tackled by the developed countries to some extent by the stringent law enactments, establishing proper recycling facilities, and trading to the underdeveloped and developing nations. But, the majority of the developing and under developed nations lacks the statutes, gaps in policy making, socio-economic-cultural barriers, technology, and the appropriate treatment facilities. In addition, the review identified ten major shortfalls (10L's) refraining the effective e-waste management, especially in the developing and under developed nations. Among which, integration of the formal and informal sectors, mandated network registry, stringent law enforcements, regulated transboundary movements, manufacturers responsibility, consumer awareness and improved eco designs, investing on effective recycling facilities, and improved disposal facilities holds the key. Further, replacing the traditional and conventional procedures with the futuristic and eco-friendly approaches such as chelation, inducing ionic liquids, integrated processes or hybrid technologies, micro factories, photo catalysis, and green adsorption will substantially harness the current barriers of the e-waste management. Finally, the present review will be a thorough glancing for the future research of e-waste management of meso-micro-macro scales.

Natural amino acids as potential chelators for soil remediation

The soils contaminated by toxic metals are often remediated using EDTA and similar non-biodegradable chelators. Most chelators are in fact synthetic amino acid derivatives, whereas natural proteinogenic amino acids (PAAs) have not been systematically explored as remediation agents, despite their well-known metal chelating abilities and environmental benefits. Our study represents a comprehensive research exploring 16 structurally and functionally different PAAs as potential remediating agents, applied to 3 different heavy metal-contaminated samples. The study was mostly focused on extracting Cd, Cu, Ni, and Zn. The reaction parameters were screened and optimized. It was found that the efficiencies of extracting Cu, Ni, and Zn by Threonine, Aspartic acid and Histidine were comparable to those by EDTA, whereas non-polar side chain-containing PAAs demonstrated consistently lower PTM extraction rates compared to other PAAs. The sulfur-containing Cysteine appeared to be efficient to extract Cd (to some extent), Ni and Zn, but not Cu, due to chemical reasons. The structure-functional correlations were identified, described, and found to be independent on the specific samples. Possible molecular mechanisms of metal extraction from soils by PAAs are discussed. In contrast to EDTA, the soil-essential elements are almost not extracted by PAAs. This important feature of the PAAs, along with their availability, observed selectivity, competitive efficiency, non-toxicity and even fertilizing properties, make them particularly soil-friendly, and thus, potentially applicable chelators in certain remediation processes.

EDTA-enhanced phytoremediation of heavy metals from sludge soil by Italian ryegrass (Lolium perenne L.)

Landscaping of sludge is a kind of recycling disposal, but the potential heavy metal risks limit its application. In this paper, the sludge soil was remediated by ryegrass, and the effect of ethylene diamine tetraacetic acid (EDTA) was studied through pot experiments. Italian ryegrass was planted in the sludge soil treated with six gradients concentrations of 0, 1, 2, 3, 4, 5 mmol kg^-1 of EDTA, and the planting conditions were kept the same. After 45 days of planting, compared with the control group (without EDTA treated), the application of 1-5 mmol kg^-1 EDTA decreased ryegrass biomass by 2-43%, reduced soil pH value by 0.21-0.34 unit, and reduced 4.1-9.7% capacity of exchange cation, but increased 1.4-8.6% soil organic matter. After growing ryegrass, the contents of heavy metals decreased by 10% for Cu, 15% for Zn, 6% for Ni, 14% for Cd and 44% for Pb; and after spraying EDTA decreased again by 33% for Cu, 31% for Zn, 56% for Ni, 24% for Cd, and 68% for Pb. In ryegrass, the uptake heavy metals were enhanced, and bio-concentration factor of Cu, Zn, Ni, Cd, and Pb of EDTA treated groups were 1.9, 1.6, 4.1, 2.7, and 4.8 times of the control group, respectively. However, EDTA only significantly increased transfer factor values of Cu and Zn, and made bio-extraction factor value of Cu greater than 1. The remediation factor values were used to comprehensive assess accumulation capacity of heavy metals by ryegrass under EDTA treating, and they ordered in Zn > Cu > Ni > Cd > Pb, and the best dose was 2 mmol kg^-1 EDTA. Prediction models for bio-concentration factor were established by using stepwise multiple linear regression, explaining 94.9-99.3% of the corresponding elements with soil organic matter, EDTA dosage, and/or pH value (p < 0.005). This paper provided effective heavy metals remediation data for municipal sludge landscape and the prediction models.

Comparative Activation Process of Pb, Cd and Tl Using Chelating Agents from Contaminated Red Soils

Adding chelating agents is a critical technique of heavy metal activation for enhancing phytoextraction through the formation of soluble metal complexes which will be more readily available for extraction. The preliminary, dynamic, equilibrium activation experiments and speciation analysis of Pb, Cd and Tl in contaminated red soils were used to select six chelates with relatively good activation performance from nine chelates, and the effects of dosage and pH on the heavy metals activation were studied systematically. Results showed that the activation of Pb, Cd and Tl by chelates reached equilibrium within 2 h, and the activation process showed three stages. Under neutral conditions, chelates had better activation performance on Pb- and Cd-contaminated soils. Except for S,S-ethylenediamine disuccinic acid (S,S-EDDS) and citric acid (CA), the maximum equilibrium activation effect (MEAE) of ethylenediaminetetraacetic acid (EDTA), N,N-bis (carboxymethyl) glutamic acid (GLDA), diethylenetriaminepentaacetic acid (DTPA) and aminotriacetic acid (NTA) was over 81%. The MEAE of Tl-contaminated soil was less than 15%. The decreasing order of the dosage of chelating agents corresponding to MEAE for three types of contaminated soils was Pb-, Cd- and Tl-contaminated soil, relating to the forms of heavy metals, the stability constants of metal–chelates and the activation of non-target elements Fe in red soil. Under acidic conditions, the activation efficiencies of chelates decreased to differing degrees in Pb- and Cd-contaminated soils, whereas the activation efficiencies of chelating agents in Tl-contaminated soils were slightly enhanced.

New insights into chelator recycling by a chelating resin: From molecular mechanisms to applicability

As part of the project of developing a "green" and highly feasible soil remediation process, recycling an eco-friendly chelating agent, glycine, using Chelex-100 chelating resin, was studied. Two model complexes, copper and nickel glycinates, were tested under various conditions, including equivalent viscosity but different temperature conditions. Two similar complexes demonstrated very different reactivity towards Chelex-100. An in-depth study led to the discovery of unusual metal-dependent mechanisms of the complex-to-resin metal transfer. Particularly, nickel transfer proceeds via a dissociative mechanism, whereas copper transfer does not require pre-dissociation of the complexes, and proceeds via the associative ligand-exchange mechanism. Both processes result in the recovery of the used chelator. The glycine solution was applied on the spiked soil, then recovered on Chelex-100 resin and successfully reused, thus demonstrating a proof of the concept. These findings contribute to the science, strategies, and methodology of both water purification and chelator recycling fields.

Chemical extraction of trace elements from hazardous fine fraction at an old glasswork dump

Old glassworks sites have been always associated with contamination by different trace elements like Pb, Cd, As, Zn and others. The mixture of soil and waste glass of particle sizes <2 mm at one of the oldest Swedish glassworks (the Pukeberg) was studied by analyzing the trace elements content, organic content (3.6%) and pH (7.4). The results showed hazardous concentrations of Pb (1525 mg/kg), Ba (1312 mg/kg), Sb (128 mg/kg), Cd (36 mg/kg), As (118 mg/kg), Zn (1154 mg/kg) and Co (263 mg/kg) exceeded the Swedish guidelines of contaminated soil. Batch chemical extraction by the chelating agents EDTA, DTPA and the biodegradable NTA were performed to study the effect of chelating agent concentration and mixing time on the extraction efficiencies by following a Box-Wilson design of experiments. The results displayed good extraction efficiencies (less than 41%) of Pb, Cd, As and Zn by the EDTA, DTPA and NTA, which seemed depends on the type of chelator. In addition, high correlation between the extraction efficiencies, the chelators concentration and mixing time was found based on the statistical and experimental results.

Polyaspartate extraction of cadmium ions from contaminated soil: Evaluation and optimization using central composite design

The occurrences of heavy metal contaminated sites and soils and the need for devising environmentally friendly solutions have become global issues of serious concern. In this study, polyaspartate (a highly biodegradable agent) was synthesized using L-Aspartic acid via a new modified thermal procedure and employed for extraction of cadmium ions (Cd) from contaminated soil. Response surface methodology approach using 3⁵ full faced centered central composite design was employed for modeling, evaluating and optimizing the influence of polyaspartate concentration (36-145mM), polyaspartate/soil ratio (5-25), initial heavy metal concentration (100-500mg/kg), initial pH (3-6) and extraction time (6-24h) on Cd ions extracted into the polyaspartate solution and its residual concentration in the treated soil. The Cd extraction efficacy obtained reached up to 98.8%. Increase in Cd extraction efficiency was associated with increase in the polyaspartate and Cd concentration coupled with lower polyaspertate/soil ratio and initial pH. Under the optimal conditions characterized with minimal utilization of the polyaspartate and high Cd ions removal, the extractible Cd in the polyaspartate solution reached up to 84.4mg/L which yielded 85% Cd extraction efficacy. This study demonstrates the suitability of using polyaspartate as an effective environmentally friendly chelating agent for Cd extraction from contaminated soils.

Adsorption of Pb and Zn from binary metal solutions and in the presence of dissolved organic carbon by DTPA-functionalised, silica-coated magnetic nanoparticles

The ability of diethylenetriaminepentaacetic acid (DTPA)-functionalised, silica-coated magnetic nanoparticles to adsorb Pb and Zn from single and bi-metallic metal solutions and from solutions containing dissolved organic carbon was assessed. In all experiments 10 mL solutions containing 10 mg of nanoparticles were used. For single metal solutions (10 mg L^-1 Pb or Zn) at pH 2 to 8, extraction efficiencies were typically >70%. In bi-metallic experiments, examining the effect of a background of either Zn or Pb (0.025 mmol L^-1) on the adsorption of variable concentrations (0-0.045 mmol L^-1) of the other metal (Pb or Zn, respectively) adsorption was well modelled by linear isotherms (R² > 0.60; p ≤ 0.001) and Pb was preferentially adsorbed relative to Zn. In dissolved organic carbon experiments, the presence of fulvic acid (0, 2.1 and 21 mg DOC L^-1) reduced Pb and Zn adsorption from 0.01, 0.1 and 1.0 mmol L^-1 solutions. However, even at 21 mg DOC L^-1 fulvic acid, extraction efficiencies from 0.01 to 0.1 mmol L^-1 solutions remained >80% (Pb) and >50% (Zn). Decreases in extraction efficiency were significant between initial metal concentrations of 0.1 and 1.0 mmol L^-1 indicating that at metal loadings between c. 100 mg kg^-1 and 300 mg kg^-1 occupancy of adsorption sites began to limit further adsorption. The nanoparticles have the potential to perform effectively as metal adsorbents in systems containing more than one metal and dissolved organic carbon at a range of pH values.

A method for dye extraction using an aqueous two-phase system: Effect of co-occurrence of contaminants in textile industry wastewater

This paper reports a green and efficient procedure for extraction of the dyes Malachite Green (MG), Methylene Blue (MB), and Reactive Red 195 (RR) using an aqueous two-phase system (ATPS). An ATPS consists mainly of water, together with polymer and salt, and does not employ any organic solvent. The extraction efficiency was evaluated by means of the partition coefficients (K) and residual percentages (%R) of the dyes, under different experimental conditions, varying the tie-line length (TLL) of the system, the pH, the type of ATPS-forming electrolyte, and the type of ATPS-forming polymer. For MG, the best removal (K = 4.10 × 10(4), %R = 0.0069%) was obtained with the ATPS: PEO 1500 + Na2C4H4O6 (TLL = 50.21% (w/w), pH = 6.00). For MB, the maximum extraction (K = 559.9, %R = 0.258%) was achieved with the ATPS: PEO 400 + Na2SO4 (TLL = 50.31% (w/w), pH = 1.00). Finally for RR, the method that presented the best results (K = 3.75 × 10(4), %R = 0.237%) was the ATPS: PEO 400 + Na2SO4 (TLL = 50.31% (w/w), pH = 6.00). The method was applied to the recovery of these dyes from a textile effluent sample, resulting in values of K of 1.17 × 10(4), 724.1, and 3.98 × 10(4) for MG, MB, and RR, respectively, while the corresponding %R values were 0.0038, 0.154, and 0.023%, respectively. In addition, the ATPS methodology provided a high degree of color removal (96.5-97.95%) from the textile effluent.