1
|
Chen JL, Njoku DI, Tang C, Gao Y, Chen J, Peng YK, Sun H, Mao G, Pan M, Tam NFY. Advances in Microfluidic Paper-Based Analytical Devices (µPADs): Design, Fabrication, and Applications. SMALL METHODS 2024:e2400155. [PMID: 38781604 DOI: 10.1002/smtd.202400155] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/30/2024] [Revised: 05/01/2024] [Indexed: 05/25/2024]
Abstract
Microfluidic Paper-based Analytical Devices (µPADs) have emerged as a new class of microfluidic systems, offering numerous advantages over traditional microfluidic chips. These advantages include simplicity, cost-effectiveness, stability, storability, disposability, and portability. As a result, various designs for different types of assays are developed and investigated. In recent years, µPADs are combined with conventional detection methods to enable rapid on-site detection, providing results comparable to expensive and sophisticated large-scale testing methods that require more time and skilled personnel. The application of µPAD techniques is extensive in environmental quality control/analysis, clinical diagnosis, and food safety testing, paving the way for on-site real-time diagnosis as a promising future development. This review focuses on the recent research advancements in the design, fabrication, material selection, and detection methods of µPADs. It provides a comprehensive understanding of their principles of operation, applications, and future development prospects.
Collapse
Affiliation(s)
- Jian Lin Chen
- Department of Applied Science, School of Science and Technology, Hong Kong Metropolitan University, Good Shepherd Street, Ho Man Tin, Kowloon, Hong Kong SAR, P. R. China
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR, P. R. China
- Shenzhen Research Institute of City University of Hong Kong, Shenzhen, 518057, P. R. China
| | - Demian Ifeanyi Njoku
- Department of Applied Science, School of Science and Technology, Hong Kong Metropolitan University, Good Shepherd Street, Ho Man Tin, Kowloon, Hong Kong SAR, P. R. China
| | - Cui Tang
- Department of Applied Science, School of Science and Technology, Hong Kong Metropolitan University, Good Shepherd Street, Ho Man Tin, Kowloon, Hong Kong SAR, P. R. China
| | - Yaru Gao
- Department of Applied Science, School of Science and Technology, Hong Kong Metropolitan University, Good Shepherd Street, Ho Man Tin, Kowloon, Hong Kong SAR, P. R. China
| | - Jiayu Chen
- Department of Applied Science, School of Science and Technology, Hong Kong Metropolitan University, Good Shepherd Street, Ho Man Tin, Kowloon, Hong Kong SAR, P. R. China
| | - Yung-Kang Peng
- Shenzhen Research Institute of City University of Hong Kong, Shenzhen, 518057, P. R. China
- Department of Chemistry, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR, P. R. China
| | - Hongyan Sun
- Shenzhen Research Institute of City University of Hong Kong, Shenzhen, 518057, P. R. China
- Department of Chemistry, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR, P. R. China
| | - Guozhu Mao
- School of Environmental Science and Engineering, Tianjin University, Tianjin, 300350, P. R. China
| | - Min Pan
- Department of Applied Science, School of Science and Technology, Hong Kong Metropolitan University, Good Shepherd Street, Ho Man Tin, Kowloon, Hong Kong SAR, P. R. China
| | - Nora Fung-Yee Tam
- Department of Applied Science, School of Science and Technology, Hong Kong Metropolitan University, Good Shepherd Street, Ho Man Tin, Kowloon, Hong Kong SAR, P. R. China
- State Key Laboratory of Marine Pollution, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR, P. R. China
- Shenzhen Research Institute of City University of Hong Kong, Shenzhen, 518057, P. R. China
- Department of Chemistry, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR, P. R. China
| |
Collapse
|
2
|
Mirhosseini S, Nasiri AF, Khatami F, Mirzaei A, Aghamir SMK, Kolahdouz M. A digital image colorimetry system based on smart devices for immediate and simultaneous determination of enzyme-linked immunosorbent assays. Sci Rep 2024; 14:2587. [PMID: 38297148 PMCID: PMC10830485 DOI: 10.1038/s41598-024-52931-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/12/2023] [Accepted: 01/25/2024] [Indexed: 02/02/2024] Open
Abstract
Standard enzyme-linked immunosorbent assays based on microplates are frequently utilized for various molecular sensing, disease screening, and nanomedicine applications. Comparing this multi-well plate batched analysis to non-batched or non-standard testing, the diagnosis expenses per patient are drastically reduced. However, the requirement for rather big and pricey readout instruments prevents their application in environments with limited resources, especially in the field. In this work, a handheld cellphone-based colorimetric microplate reader for quick, credible, and novel analysis of digital images of human cancer cell lines at a reasonable price was developed. Using our in-house-developed app, images of the plates are captured and sent to our servers, where they are processed using a machine learning algorithm to produce diagnostic results. Using FDA-approved human epididymis protein of ovary IgG (HE4), prostate cancer cell line (PC3), and bladder cancer cell line (5637) ELISA tests, we successfully examined this mobile platform. The accuracies for the HE4, PC3, and 5637 tests were 93%, 97.5%, and 97.2%, respectively. By contrasting the findings with the measurements made using optical absorption EPOCH microplate readers and optical absorption Tecan microplate readers, this approach was found to be accurate and effective. As a result, digital image colorimetry on smart devices offered a practical, user-friendly, affordable, precise, and effective method for quickly identifying human cancer cell lines. Thus, healthcare providers might use this portable device to carry out high-throughput illness screening, epidemiological investigations or monitor vaccination campaigns.
Collapse
Affiliation(s)
- Shaghayegh Mirhosseini
- School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran
| | - Aryanaz Faghih Nasiri
- School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran
| | - Fatemeh Khatami
- Urology Research Center, Tehran University of Medical Sciences, Tehran, Iran
| | - Akram Mirzaei
- Urology Research Center, Tehran University of Medical Sciences, Tehran, Iran
| | | | - Mohammadreza Kolahdouz
- School of Electrical and Computer Engineering, College of Engineering, University of Tehran, Tehran, Iran.
| |
Collapse
|
3
|
Liu L, Du K. A perspective on computer vision in biosensing. BIOMICROFLUIDICS 2024; 18:011301. [PMID: 38223547 PMCID: PMC10787640 DOI: 10.1063/5.0185732] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/01/2023] [Accepted: 12/26/2023] [Indexed: 01/16/2024]
Abstract
Computer vision has become a powerful tool in the field of biosensing, aiding in the development of innovative and precise systems for the analysis and interpretation of biological data. This interdisciplinary approach harnesses the capabilities of computer vision algorithms and techniques to extract valuable information from various biosensing applications, including medical diagnostics, environmental monitoring, and food health. Despite years of development, there is still significant room for improvement in this area. In this perspective, we outline how computer vision is applied to raw sensor data in biosensors and its advantages to biosensing applications. We then discuss ongoing research and developments in the field and subsequently explore the challenges and opportunities that computer vision faces in biosensor applications. We also suggest directions for future work, ultimately underscoring the significant impact of computer vision on advancing biosensing technologies and their applications.
Collapse
Affiliation(s)
- Li Liu
- Department of Chemical and Environmental Engineering, University of California, Riverside, California 92521, USA
| | - Ke Du
- Department of Chemical and Environmental Engineering, University of California, Riverside, California 92521, USA
| |
Collapse
|
4
|
Hassan RO, Othman HO, Ali DS. New spectrophotometric and smartphone-based colorimetric methods for determination of atenolol in pharmaceutical formulations. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2023; 302:123009. [PMID: 37330334 DOI: 10.1016/j.saa.2023.123009] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/17/2023] [Revised: 05/25/2023] [Accepted: 06/10/2023] [Indexed: 06/19/2023]
Abstract
Novel spectrophotometric and smartphone-based colorimetric methods were developed and validated for the estimation of atenolol (ATE) in pharmaceutical formulations. The measurement procedure is based on the de-diazotization reaction, in which ATE is able to inhibit the diazotized sulfanilic acid from reacting with 8-hydroxy quinoline (8-HQ) in a basic medium. As a result, the formation of red-orange color azo-dye is hindered, and the color intensity is decreased proportionally to concentration of ATE. In spectrophotometric method the azo-dye color fate was monitored at 495 nm. While in smartphone-based colorimetric (SBC) method the captured image in the design processed by RGB App and transferred to the absorbance. The reactant concentrations were optimized using a central composite design (CCD) and response surface method. The methods exhibit good linearity in the 8.0 to 60.0 µg mL-1 range with no significant effect of interferences. The spectrophotometric method yields a linear equation with a slope of 0.0187 (R2 = 0.9993), a limit of detection (LOD) of 1.28 µg mL-1, and a limit of quantification (LOQ) of 4.28 µg mL-1. On the other hand, the smartphone-based colorimetric (SBC) method demonstrates a linear equation with a slope of 0.0127 (R2 = 0.9965), an LOD of 2.13 µg mL-1, and an LOQ of 7.09 µg mL-1. Analyzing ATE in pharmaceutical tablets was utilized to validate the applicability of the developed methods, and the results were statistically compared with those obtained by the HPLC method using the t-test and F-test.
Collapse
Affiliation(s)
- Rebwar Omar Hassan
- Department of Chemistry, College of Science, Salahaddin University, Erbil-Kurdistan Region, Iraq.
| | - Hazha Omar Othman
- Department of Chemistry, College of Science, Salahaddin University, Erbil-Kurdistan Region, Iraq; Pharmacy Department, Faculty of Pharmacy, Tishk International University, Erbil-Kurdistan Region, Iraq
| | - Diyar Salahuddin Ali
- Department of Chemistry, College of Science, Salahaddin University, Erbil-Kurdistan Region, Iraq; Department of Medical Laboratory Science, College of Science, Knowledge University, Erbil-Kurdistan Region, Iraq
| |
Collapse
|
5
|
Tran MH, Fei B. Compact and ultracompact spectral imagers: technology and applications in biomedical imaging. JOURNAL OF BIOMEDICAL OPTICS 2023; 28:040901. [PMID: 37035031 PMCID: PMC10075274 DOI: 10.1117/1.jbo.28.4.040901] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/17/2022] [Accepted: 02/27/2023] [Indexed: 05/18/2023]
Abstract
Significance Spectral imaging, which includes hyperspectral and multispectral imaging, can provide images in numerous wavelength bands within and beyond the visible light spectrum. Emerging technologies that enable compact, portable spectral imaging cameras can facilitate new applications in biomedical imaging. Aim With this review paper, researchers will (1) understand the technological trends of upcoming spectral cameras, (2) understand new specific applications that portable spectral imaging unlocked, and (3) evaluate proper spectral imaging systems for their specific applications. Approach We performed a comprehensive literature review in three databases (Scopus, PubMed, and Web of Science). We included only fully realized systems with definable dimensions. To best accommodate many different definitions of "compact," we included a table of dimensions and weights for systems that met our definition. Results There is a wide variety of contributions from industry, academic, and hobbyist spaces. A variety of new engineering approaches, such as Fabry-Perot interferometers, spectrally resolved detector array (mosaic array), microelectro-mechanical systems, 3D printing, light-emitting diodes, and smartphones, were used in the construction of compact spectral imaging cameras. In bioimaging applications, these compact devices were used for in vivo and ex vivo diagnosis and surgical settings. Conclusions Compact and ultracompact spectral imagers are the future of spectral imaging systems. Researchers in the bioimaging fields are building systems that are low-cost, fast in acquisition time, and mobile enough to be handheld.
Collapse
Affiliation(s)
- Minh H. Tran
- University of Texas at Dallas, Department of Bioengineering, Richardson, Texas, United States
| | - Baowei Fei
- University of Texas at Dallas, Department of Bioengineering, Richardson, Texas, United States
- University of Texas Southwestern Medical Center, Department of Radiology, Dallas, Texas, United States
- University of Texas at Dallas, Center for Imaging and Surgical Innovation, Richardson, Texas, United States
- Address all correspondence to Baowei Fei,
| |
Collapse
|
6
|
Lovecchio N, Costantini F, Nascetti A, de Cesare G, Caputo D. Thin-Film-Based Multifunctional System for Optical Detection and Thermal Treatment of Biological Samples. BIOSENSORS 2022; 12:bios12110969. [PMID: 36354478 PMCID: PMC9688047 DOI: 10.3390/bios12110969] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/30/2022] [Revised: 10/24/2022] [Accepted: 10/31/2022] [Indexed: 05/31/2023]
Abstract
In this work, we present a multifunctional Lab-on-Chip (LoC) platform based on hydrogenated amorphous silicon sensors suitable for a wide range of application in the fields of biochemical and food quality control analysis. The proposed system includes a LoC fabricated on a 5 cm × 5 cm glass substrate and a set of electronic boards for controlling the LoC functionalities. The presented Lab-on-Chip comprises light and temperature sensors, a thin film resistor acting as a heating source, and an optional thin film interferential filter suitable for fluorescence analysis. The developed electronics allows to control the thin film heater, a light source for fluorescence and absorption measurements, and the photosensors to acquire luminescent signals. All these modules are enclosed in a black metal box ensuring the portability of the whole platform. System performances have been evaluated in terms of sensor optical performances and thermal control achievements. For optical sensors, we have found a minimum number of detectable photons of 8 × 104 s-1·cm-2 at room temperature, 1.6 × 106 s-1·cm-2 in presence of fluorescence excitation source, and 2.4 × 106 s-1·cm-2 at 90 °C. From a thermal management point of view, we have obtained heating and cooling rates both equal to 2.2 °C/s, and a temperature sensor sensitivity of about 3 mV/°C even in presence of light. The achieved performances demonstrate the possibility to simultaneously use all integrated sensors and actuators, making promising the presented platform for a wide range of application fields.
Collapse
Affiliation(s)
- Nicola Lovecchio
- Department of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, 00184 Rome, Italy
| | - Francesca Costantini
- Department of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, 00184 Rome, Italy
- CREA-DC Research Centre for Plant Protection and Certification, 00156 Rome, Italy
| | - Augusto Nascetti
- School of Aerospace Engineering, Sapienza University of Rome, 00138 Rome, Italy
| | - Giampiero de Cesare
- Department of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, 00184 Rome, Italy
| | - Domenico Caputo
- Department of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, 00184 Rome, Italy
| |
Collapse
|
7
|
Mauricio López-Téllez J, del Pilar Cañizares-Macías M. A paper-based analytical device with in-situ Carrez pretreatment for the determination of total polyphenolic content and antioxidant capacity. Food Chem 2022; 405:134952. [DOI: 10.1016/j.foodchem.2022.134952] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/19/2021] [Revised: 11/04/2022] [Accepted: 11/10/2022] [Indexed: 11/15/2022]
|
8
|
Durrer J, Agrawal P, Ozgul A, Neuhauss SCF, Nama N, Ahmed D. A robot-assisted acoustofluidic end effector. Nat Commun 2022; 13:6370. [PMID: 36289227 PMCID: PMC9605990 DOI: 10.1038/s41467-022-34167-y] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2021] [Accepted: 10/17/2022] [Indexed: 12/25/2022] Open
Abstract
Liquid manipulation is the foundation of most laboratory processes. For macroscale liquid handling, both do-it-yourself and commercial robotic systems are available; however, for microscale, reagents are expensive and sample preparation is difficult. Over the last decade, lab-on-a-chip (LOC) systems have come to serve for microscale liquid manipulation; however, lacking automation and multi-functionality. Despite their potential synergies, each has grown separately and no suitable interface yet exists to link macro-level robotics with micro-level LOC or microfluidic devices. Here, we present a robot-assisted acoustofluidic end effector (RAEE) system, comprising a robotic arm and an acoustofluidic end effector, that combines robotics and microfluidic functionalities. We further carried out fluid pumping, particle and zebrafish embryo trapping, and mobile mixing of complex viscous liquids. Finally, we pre-programmed the RAEE to perform automated mixing of viscous liquids in well plates, illustrating its versatility for the automatic execution of chemical processes.
Collapse
Affiliation(s)
- Jan Durrer
- grid.5801.c0000 0001 2156 2780Acoustic Robotics Systems Lab, Institute or Robotics and Intelligent Systems, Department of Mechanical and Process Engineering, ETH Zurich, Zurich, Switzerland
| | - Prajwal Agrawal
- grid.5801.c0000 0001 2156 2780Acoustic Robotics Systems Lab, Institute or Robotics and Intelligent Systems, Department of Mechanical and Process Engineering, ETH Zurich, Zurich, Switzerland
| | - Ali Ozgul
- grid.5801.c0000 0001 2156 2780Acoustic Robotics Systems Lab, Institute or Robotics and Intelligent Systems, Department of Mechanical and Process Engineering, ETH Zurich, Zurich, Switzerland
| | - Stephan C. F. Neuhauss
- grid.7400.30000 0004 1937 0650Department of Molecular Life Sciences, University of Zurich, Zurich, Switzerland
| | - Nitesh Nama
- grid.24434.350000 0004 1937 0060Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE USA
| | - Daniel Ahmed
- grid.5801.c0000 0001 2156 2780Acoustic Robotics Systems Lab, Institute or Robotics and Intelligent Systems, Department of Mechanical and Process Engineering, ETH Zurich, Zurich, Switzerland
| |
Collapse
|
9
|
Analytical Chemistry: Tasks, Resolutions and Future Standpoints of the Quantitative Analyses of Environmental Complex Sample Matrices. ANALYTICA 2022. [DOI: 10.3390/analytica3030022] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
Currently, the challenges that analytical chemistry has to face are ever greater and more complex both from the point of view of the selectivity of analytical methods and their sensitivity. This is especially true in quantitative analysis, where various methods must include the development and validation of new materials, strategies, and procedures to meet the growing need for rapid, sensitive, selective, and green methods. In this context, given the International Guidelines, which over time, are updated and which set up increasingly stringent “limits”, constant innovation is required both in the pre-treatment procedures and in the instrumental configurations to obtain reliable, accurate, and reproducible information. In addition, the environmental field certainly represents the greatest challenge, as analytes are often present at trace and ultra-trace levels. These samples containing analytes at ultra-low concentration levels, therefore, require very labor-intensive sample preparation procedures and involve the high consumption of organic solvents that may not be considered “green”. In the literature, in recent years, there has been a strong development of increasingly high-performing sample preparation techniques, often “solvent-free”, as well as the development of hyphenated instrumental configurations that allow for reaching previously unimaginable levels of sensitivity. This review aims to provide an update of the most recent developments currently in use in sample pre-treatment and instrument configurations in the environmental field, also evaluating the role and future developments of analytical chemistry in light of upcoming challenges and new goals yet to be achieved.
Collapse
|
10
|
Ongaro AE, Ndlovu Z, Sollier E, Otieno C, Ondoa P, Street A, Kersaudy-Kerhoas M. Engineering a sustainable future for point-of-care diagnostics and single-use microfluidic devices. LAB ON A CHIP 2022; 22:3122-3137. [PMID: 35899603 PMCID: PMC9397368 DOI: 10.1039/d2lc00380e] [Citation(s) in RCA: 25] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 04/25/2022] [Accepted: 06/20/2022] [Indexed: 06/15/2023]
Abstract
Single-use, disposable, point-of-care diagnostic devices carry great promise for global health, including meeting urgent needs for testing and diagnosis in places with limited laboratory facilities. Unfortunately, the production and disposal of single-use devices, whether in lateral flow assay, cartridges, cassettes, or lab-on-chip microfluidic format, also poses significant challenges for environmental and human health. Point-of-care devices are commonly manufactured from unsustainable polymeric materials derived from fossil sources. Their disposal often necessitates incineration to reduce infection risk, thereby creating additional release of CO2. Many devices also contain toxic chemicals, such as cyanide derivatives, that are damaging to environmental and human health if not disposed of safely. Yet, in the absence of government regulatory frameworks, safe and sustainable waste management for these novel medical devices is often left unaddressed. There is an urgent need to find novel solutions to avert environmental and human harm from these devices, especially in low- and middle-income countries where waste management infrastructure is often weak and where the use of point-of-care tests is projected to rise in coming years. We review here common materials used in the manufacture of single-use point-of-care diagnostic tests, examine the risks they pose to environmental and human health, and investigate replacement materials that can potentially reduce the impact of microfluidic devices on the production of harmful waste. We propose solutions available to point-of-care test developers to start embedding sustainability at an early stage in their design, and to reduce their non-renewable plastic consumption in research and product development.
Collapse
Affiliation(s)
| | - Zibusiso Ndlovu
- Medecins Sans Frontières (MSF), Southern Africa Medical Unit (SAMU), Cape Town, South Africa
| | | | - Collins Otieno
- African Society for Laboratory Medicine (ASLM), Addis Ababa, Ethiopia
| | - Pascale Ondoa
- African Society for Laboratory Medicine (ASLM), Addis Ababa, Ethiopia
| | - Alice Street
- School of Social and Political Sciences, University of Edinburgh, Edinburgh, UK
| | - Maïwenn Kersaudy-Kerhoas
- School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, UK.
- Infection Medicine, College of Medicine and Veterinary Medicine University of Edinburgh, Edinburgh, UK
| |
Collapse
|
11
|
Xiao Z, Darwish GH, Susumu K, Medintz IL, Algar WR. Prototype Smartphone-Based Device for Flow Cytometry with Immunolabeling via Supra-nanoparticle Assemblies of Quantum Dots. ACS MEASUREMENT SCIENCE AU 2022; 2:57-66. [PMID: 36785592 PMCID: PMC9838726 DOI: 10.1021/acsmeasuresciau.1c00033] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Methods for the detection, enumeration, and typing of cells are important in many areas of research and healthcare. In this context, flow cytometers are a widely used research and clinical tool but are also an example of a large and expensive instrument that is limited to specialized laboratories. Smartphones have been shown to have excellent potential to serve as portable and lower-cost platforms for analyses that would normally be done in a laboratory. Here, we developed a prototype smartphone-based flow cytometer (FC). This compact 3D-printed device incorporated a laser diode and a microfluidic flow cell and used the built-in camera of a smartphone to track immunofluorescently labeled cells in suspension and measure their color. This capability was enabled by high-brightness supra-nanoparticle assemblies of colloidal semiconductor quantum dots (SiO2@QDs) as well as a support vector machine (SVM) classification algorithm. The smartphone-based FC device detected and enumerated target cells against a background of other cells, simultaneously and selectively counted two different cell types in a mixture, and used multiple colors of SiO2@QD-antibody conjugates to screen for and identify a particular cell type. The potential limits of multicolor detection are discussed alongside ideas for further development. Our results suggest that innovations in materials and engineering should enable eventual smartphone-based FC assays for clinical applications.
Collapse
Affiliation(s)
- Zhujun Xiao
- Department
of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia V6T 1Z1, Canada
| | - Ghinwa H. Darwish
- Department
of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia V6T 1Z1, Canada
| | - Kimihiro Susumu
- Jacobs
Corporation, Hanover, Maryland 21076, United
States
- Optical
Sciences Division, Code 5600, U.S. Naval
Research Laboratory, Washington, D.C. 20375, United States
| | - Igor L. Medintz
- Center
for Bio/Molecular Science and Engineering, Code 6900, U.S. Naval Research Laboratory, Washington, D.C. 20375, United States
| | - W. Russ Algar
- Department
of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia V6T 1Z1, Canada
| |
Collapse
|
12
|
Scheeline A. Selfie Spectrometry: Why Tablets, Laptops, and Cell Phones Have Not Taken Over Visible Spectrometry. Trends Analyt Chem 2022. [DOI: 10.1016/j.trac.2022.116564] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
13
|
Abstract
Wireless chemical sensors have been developed as a result of advances in chemical sensing and wireless communication technology. Because of their mobility and widespread availability, smartphones have been extensively combined with sensors such as hand-held detectors, sensor chips, and test strips for biochemical detection. Smartphones are frequently used as controllers, analyzers, and displayers for quick, authentic, and point-of-care monitoring, which may considerably streamline the design and lower the cost of sensing systems. This study looks at the most recent wireless and smartphone-supported chemical sensors. The review is divided into four different topics that emphasize the basic types of wireless smartphone-operated chemical sensors. According to a study of 114 original research publications published during recent years, market opportunities for wireless and smartphone-supported chemical sensor systems include environmental monitoring, healthcare and medicine, food quality, sport, and fitness. The issues and illustrations for each of the primary chemical sensors relevant to many application areas are covered. In terms of performance, the advancement of technologies related to chemical sensors will result in smaller and more lightweight, cost-effective, versatile, and durable devices. Given the limitations, we suggest that wireless and smartphone-supported chemical sensor systems play a significant role in the sensor Internet of Things.
Collapse
|
14
|
Human–Device Interaction in the Life Science Laboratory. ADVANCES IN BIOCHEMICAL ENGINEERING/BIOTECHNOLOGY 2022; 182:83-113. [DOI: 10.1007/10_2021_183] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
15
|
Hamid SB, Hamid AFA. Roles of Nutraceuticals and Functional Food in Prevention of Cardiovascular Disease. RESEARCH ANTHOLOGY ON RECENT ADVANCEMENTS IN ETHNOPHARMACOLOGY AND NUTRACEUTICALS 2022:810-839. [DOI: 10.4018/978-1-6684-3546-5.ch041] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/01/2023]
Abstract
The chapter provides an overview of cardiovascular disease, a major cause of mortality worldwide. It relates economic and social impacts to the disease, especially in developing countries. One of the approaches to addressing this challenge is increasing awareness within society, through implementation of education programs. It is important for society to understand the types and roles of the risk factors leading to cardiovascular disease. Emphasis is on the role of functional food and nutraceuticals as dietary sources that could prevent development of cardiovascular disease. The chapter highlights roles of nutraceuticals and functional food sources from medical plants, seeds, berries, and tropical fruits in lowering risk factors. Key findings from trials conducted in Asia, China, Europe, and America provide supporting evidence for the importance of functional food to health, and its potential for modifying the level of risk factors related to cardiovascular diseases.
Collapse
|
16
|
Guo L, Chen S, Yu YL, Wang JH. A Smartphone Optical Device for Point-of-Care Testing of Glucose and Cholesterol Using Ag NPs/UiO-66-NH 2-Based Ratiometric Fluorescent Probe. Anal Chem 2021; 93:16240-16247. [PMID: 34813276 DOI: 10.1021/acs.analchem.1c04126] [Citation(s) in RCA: 30] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Point-of-care testing (POCT) with the advantages of simplicity, rapidity, portability, and low-cost is of great importance to improve healthcare, especially in resource-limited settings and home healthcare settings. Moreover, it is a great challenge to quantitative POCT of multiplexed biomarkers within a single accessible assay but provides enhanced diagnostic accuracy and improved diagnostic efficiency. Herein, a smartphone optical device has been designed for POCT of glucose and cholesterol in metabolic syndrome patients using a ratiometric fluorescent sensor. The sensing system of Ag NPs/UiO-66-NH2 and o-phenylenediamine presents a dual-emission response to H2O2 (the main product of glucose and cholesterol catalyzed by glucose oxidase and cholesterol oxidase) on account of the inner filter effect, resulting in an increase in the response of the fluorescence intensity ratio (F555 nm/F425 nm) accompanied by a distinguishable color transition from blue to yellow green. After compositing probes with a flexible substrate, the obtained test strip can be integrated with a smartphone-based portable platform to read RGB values for accurate testing of glucose and cholesterol with both detection limits of 10 μmol L-1, which are hundreds of times lower than their concentrations in human serum. With the advantages of low-cost, ease of operation, and broad adaptability, this smartphone optical device holds great potential for portable detection of numerous targets in personalized healthcare and clinical diagnosis.
Collapse
Affiliation(s)
- Lan Guo
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| | - Shuai Chen
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| | - Yong-Liang Yu
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| | - Jian-Hua Wang
- Research Center for Analytical Sciences, Department of Chemistry, College of Sciences, Northeastern University, Box 332, Shenyang 110819, China
| |
Collapse
|
17
|
Luka GS, Nowak E, Toyata QR, Tasnim N, Najjaran H, Hoorfar M. Portable on-chip colorimetric biosensing platform integrated with a smartphone for label/PCR-free detection of Cryptosporidium RNA. Sci Rep 2021; 11:23192. [PMID: 34853388 PMCID: PMC8636559 DOI: 10.1038/s41598-021-02580-w] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2021] [Accepted: 11/16/2021] [Indexed: 11/13/2022] Open
Abstract
Cryptosporidium, a protozoan pathogen, is a leading threat to public health and the economy. Herein, we report the development of a portable, colorimetric biosensing platform for the sensitive, selective and label/PCR-free detection of Cryptosporidium RNA using oligonucleotides modified gold nanoparticles (AuNPs). A pair of specific thiolated oligonucleotides, complementary to adjacent sequences on Cryptosporidium RNA, were attached to AuNPs. The need for expensive laboratory-based equipment was eliminated by performing the colorimetric assay on a micro-fabricated chip in a 3D-printed holder assembly. A smartphone camera was used to capture an image of the color change for quantitative analysis. The detection was based on the aggregation of the gold nanoparticles due to the hybridization between the complementary Cryptosporidium RNA and the oligonucleotides immobilized on the AuNPs surface. In the complementary RNA's presence, a distinctive color change of the AuNPs (from red to blue) was observed by the naked eye. However, in the presence of non-complementary RNA, no color change was observed. The sensing platform showed wide linear responses between 5 and 100 µM with a low detection limit of 5 µM of Cryptosporidium RNA. Additionally, the sensor developed here can provide information about different Cryptosporidium species present in water resources. This cost-effective, easy-to-use, portable and smartphone integrated on-chip colorimetric biosensor has great potential to be used for real-time and portable POC pathogen monitoring and molecular diagnostics.
Collapse
Affiliation(s)
- George S Luka
- School of Engineering, Faculty of Applied Science, The University of British Columbia, Kelowna, BC, V1V 1V7, Canada
| | - Ephraim Nowak
- School of Engineering, Faculty of Applied Science, The University of British Columbia, Kelowna, BC, V1V 1V7, Canada
| | - Quin Robert Toyata
- School of Engineering, Faculty of Applied Science, The University of British Columbia, Kelowna, BC, V1V 1V7, Canada
| | - Nishat Tasnim
- School of Engineering, Faculty of Applied Science, The University of British Columbia, Kelowna, BC, V1V 1V7, Canada
| | - Homayoun Najjaran
- School of Engineering, Faculty of Applied Science, The University of British Columbia, Kelowna, BC, V1V 1V7, Canada
| | - Mina Hoorfar
- School of Engineering, Faculty of Applied Science, The University of British Columbia, Kelowna, BC, V1V 1V7, Canada.
| |
Collapse
|
18
|
Recent advances on portable sensing and biosensing assays applied for detection of main chemical and biological pollutant agents in water samples: A critical review. Trends Analyt Chem 2021. [DOI: 10.1016/j.trac.2021.116344] [Citation(s) in RCA: 37] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
|
19
|
Arai MS, de Camargo ASS. Exploring the use of upconversion nanoparticles in chemical and biological sensors: from surface modifications to point-of-care devices. NANOSCALE ADVANCES 2021; 3:5135-5165. [PMID: 36132634 PMCID: PMC9417030 DOI: 10.1039/d1na00327e] [Citation(s) in RCA: 28] [Impact Index Per Article: 9.3] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/03/2021] [Accepted: 07/21/2021] [Indexed: 05/04/2023]
Abstract
Upconversion nanoparticles (UCNPs) have emerged as promising luminescent nanomaterials due to their unique features that allow the overcoming of several problems associated with conventional fluorescent probes. Although UCNPs have been used in a broad range of applications, it is probably in the field of sensing where they best evidence their potential. UCNP-based sensors have been designed with high sensitivity and selectivity, for detection and quantification of multiple analytes ranging from metal ions to biomolecules. In this review, we deeply explore the use of UCNPs in sensing systems emphasizing the most relevant and recent studies on the topic and explaining how these platforms are constructed. Before diving into UCNP-based sensing platforms it is important to understand the unique characteristics of these nanoparticles, why they are attracting so much attention, and the most significant interactions occurring between UCNPs and additional probes. These points are covered over the first two sections of the article and then we explore the types of fluorescent responses, the possible analytes, and the UCNPs' integration with various material types such as gold nanostructures, quantum dots and dyes. All the topics are supported by analysis of recently reported sensors, focusing on how they are built, the materials' interactions, the involved synthesis and functionalization mechanisms, and the conjugation strategies. Finally, we explore the use of UCNPs in paper-based sensors and how these platforms are paving the way for the development of new point-of-care devices.
Collapse
Affiliation(s)
- Marylyn S Arai
- São Carlos Institute of Physics, University of São Paulo Av. Trabalhador Sãocarlense 400 13566-590 São Carlos Brazil
| | - Andrea S S de Camargo
- São Carlos Institute of Physics, University of São Paulo Av. Trabalhador Sãocarlense 400 13566-590 São Carlos Brazil
| |
Collapse
|
20
|
Algar WR, Massey M, Rees K, Higgins R, Krause KD, Darwish GH, Peveler WJ, Xiao Z, Tsai HY, Gupta R, Lix K, Tran MV, Kim H. Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging. Chem Rev 2021; 121:9243-9358. [PMID: 34282906 DOI: 10.1021/acs.chemrev.0c01176] [Citation(s) in RCA: 123] [Impact Index Per Article: 41.0] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.
Collapse
Affiliation(s)
- W Russ Algar
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Melissa Massey
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Kelly Rees
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Rehan Higgins
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Katherine D Krause
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Ghinwa H Darwish
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - William J Peveler
- School of Chemistry, Joseph Black Building, University of Glasgow, Glasgow G12 8QQ, U.K
| | - Zhujun Xiao
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Hsin-Yun Tsai
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Rupsa Gupta
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Kelsi Lix
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Michael V Tran
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| | - Hyungki Kim
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, BC V6T 1Z1, Canada
| |
Collapse
|
21
|
Wu X, Pan J, Zhu X, Hong C, Hu A, Zhu C, Liu Y, Yang K, Zhu L. MS 2 device: smartphone-facilitated mobile nucleic acid analysis on microfluidic device. Analyst 2021; 146:3823-3833. [PMID: 34121097 DOI: 10.1039/d1an00367d] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Mobile sensing based on the integration of microfluidic devices and smartphones, so-called MS2 technology, has enabled many applications over recent years and continues to stimulate growing interest in both research communities and industries. In particular, MS2 technology has been proven to be able to be applied to molecular diagnostic analysis and can be implemented for basic research and clinical testing. However, the currently reported MS2-based nucleic acid analysis system has limited use in practical applications, because it is not integrated with quantitative PCR, multiplex PCR, and isothermal amplification functions, and lacks temperature control, image acquisition and real-time processing units with excellent performance. To provide a more universal and powerful platform, we here developed a novel MS2 device by integrating a thermocycler, a multi fluorescence detection unit, a PCR chip, an isothermal chip, and a smartphone. The MS2 device was approximately 325 mm (L) × 200 mm (W) × 200 mm (H) in volume and only 5 kg in weight, and showed an average power consumption of about 38.4 W. The entire nucleic acid amplification and analysis could be controlled through a self-made smartphone App. The maximum heating and cooling rates were 5 °C s-1 and 4 °C s-1, respectively. The entire PCR could be completed within 65 min. The temperature uniformity was less than 0.1 °C. Besides, the temperature stability over time (30 min) was within ±0.04 °C. Four optical channels were integrated (FAM, HEX, TAMRA, and ROX) on the MS2 device. In particular, the PCR-based detection sensitivity reached 1 copy per μL, and the amplification efficiency was calculated to be 106.8%. Besides, the MS2 device also was compatible with multiplex PCR and isothermal amplification. In short, the MS2 device showed performance consistent with that of traditional commercial equipment. Thus, the MS2 device provides an easy and integrated experimental platform for molecular diagnostic-related research and potential medical diagnostic applications.
Collapse
Affiliation(s)
- Xiaosong Wu
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China. and University of Science and Technology of China, No. 96, JinZhai Road Baohe District, Hefei 230026, PR China
| | - Jingyu Pan
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China.
| | - Xinchao Zhu
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China. and University of Science and Technology of China, No. 96, JinZhai Road Baohe District, Hefei 230026, PR China
| | - Chenggang Hong
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China.
| | - Anzhong Hu
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China.
| | - Cancan Zhu
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China.
| | - Yong Liu
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China.
| | - Ke Yang
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China.
| | - Ling Zhu
- Anhui Institute of Optics and Fine Mechanics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei, Anhui, PR China.
| |
Collapse
|
22
|
Conchouso D, Al-Ma'abadi A, Behzad H, Alarawi M, Hosokawa M, Nishikawa Y, Takeyama H, Mineta K, Gojobori T. Integration of Droplet Microfluidic Tools for Single-Cell Functional Metagenomics: An Engineering Head Start. GENOMICS, PROTEOMICS & BIOINFORMATICS 2021; 19:504-518. [PMID: 34952209 PMCID: PMC8864243 DOI: 10.1016/j.gpb.2021.03.010] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/06/2020] [Revised: 02/09/2021] [Accepted: 03/09/2021] [Indexed: 11/25/2022]
Abstract
Droplet microfluidic techniques have shown promising outcome to study single cells at high throughput. However, their adoption in laboratories studying “-omics” sciences is still irrelevant due to the complex and multidisciplinary nature of the field. To facilitate their use, here we provide engineering details and organized protocols for integrating three droplet-based microfluidic technologies into the metagenomic pipeline to enable functional screening of bioproducts at high throughput. First, a device encapsulating single cells in droplets at a rate of ∼250 Hz is described considering droplet size and cell growth. Then, we expand on previously reported fluorescence-activated droplet sorting systems to integrate the use of 4 independent fluorescence-exciting lasers (i.e., 405, 488, 561, and 637 nm) in a single platform to make it compatible with different fluorescence-emitting biosensors. For this sorter, both hardware and software are provided and optimized for effortlessly sorting droplets at 60 Hz. Then, a passive droplet merger is also integrated into our pipeline to enable adding new reagents to already-made droplets at a rate of 200 Hz. Finally, we provide an optimized recipe for manufacturing these chips using silicon dry-etching tools. Because of the overall integration and the technical details presented here, our approach allows biologists to quickly use microfluidic technologies and achieve both single-cell resolution and high-throughput capability (>50,000 cells/day) for mining and bioprospecting metagenomic data
Collapse
Affiliation(s)
- David Conchouso
- Department of Industrial and Mechanical Engineering, Universidad de las Américas Puebla, Puebla 72810, Mexico; Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia; Biological and Environmental Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia
| | - Amani Al-Ma'abadi
- Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia; Biological and Environmental Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia
| | - Hayedeh Behzad
- Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia; Biological and Environmental Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia
| | - Mohammed Alarawi
- Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia; Biological and Environmental Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia
| | - Masahito Hosokawa
- Research Organization for Nano & Life Innovation, Waseda University, Tokyo 162-0041, Japan; Department of Life Science and Medical Bioscience, Waseda University, Tokyo 162-8480, Japan; Institute for Advanced Research of Biosystem Dynamics, Waseda Research Institute for Science and Engineering, Waseda University, Tokyo 169-8555, Japan
| | - Yohei Nishikawa
- Research Organization for Nano & Life Innovation, Waseda University, Tokyo 162-0041, Japan; Computational Bio Big-Data Open Innovation Laboratory, AIST-Waseda University, Tokyo 169-0072, Japan
| | - Haruko Takeyama
- Research Organization for Nano & Life Innovation, Waseda University, Tokyo 162-0041, Japan; Department of Life Science and Medical Bioscience, Waseda University, Tokyo 162-8480, Japan; Institute for Advanced Research of Biosystem Dynamics, Waseda Research Institute for Science and Engineering, Waseda University, Tokyo 169-8555, Japan; Computational Bio Big-Data Open Innovation Laboratory, AIST-Waseda University, Tokyo 169-0072, Japan
| | - Katsuhiko Mineta
- Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia; Computer, Electrical, and Mathematical Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia.
| | - Takashi Gojobori
- Computational Bioscience Research Center, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia; Biological and Environmental Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900, Saudi Arabia.
| |
Collapse
|
23
|
Jégouic SM, Jones IM, Edwards AD. Affordable mobile microfluidic diagnostics: minimum requirements for smartphones and digital imaging for colorimetric and fluorometric anti-dengue and anti-SARS-CoV-2 antibody detection. Wellcome Open Res 2021; 6:57. [PMID: 36312459 PMCID: PMC9614285 DOI: 10.12688/wellcomeopenres.16628.1] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 03/01/2021] [Indexed: 12/23/2022] Open
Abstract
Background: Miniaturised bioassays permit diagnostic testing near the patient, and the results can be recorded digitally using inexpensive cameras including smartphone and mobile phone cameras. Although digital cameras are now inexpensive and portable, the minimum performance required for microfluidic diagnostic bioassays has not been defined. We present a systematic comparison of a wide range of different digital cameras for capturing and measuring results of microfluidic bioassays and describe a framework to specify performance requirements to quantify immunoassays. Methods: A set of 200 µm diameter microchannels was filled with a range of concentrations of dyes used in colorimetric and fluorometric enzyme immunoassays. These were imaged in parallel using cameras of varying cost and performance ranging from <£30 to >£500. Results: Higher resolution imaging allowed larger numbers of microdevices to be resolved and analysed in a single image. In contrast, low quality cameras were still able to quantify results but for fewer samples. In some cases, an additional macro lens was added to focus closely. If image resolution was sufficient to identify individual microfluidic channels as separate lines, all cameras were able to quantify a similar range of concentrations of both colorimetric and fluorometric dyes. However, the mid-range cameras performed better, with the lowest cost cameras only allowing one or two samples to be quantified per image. Consistent with these findings, we demonstrate that quantitation (to determine endpoint titre) of antibodies against dengue and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) viruses is possible using a wide range of digital imaging devices including the mid-range smartphone iPhone 6S and a budget Android smartphone costing <£50. Conclusions: In conclusion, while more expensive and higher quality cameras allow larger numbers of devices to be simultaneously imaged, even the lowest resolution and cheapest cameras were sufficient to record and quantify immunoassay results.
Collapse
Affiliation(s)
- Sophie M. Jégouic
- Reading School of Pharmacy, University of Reading, Reading, RG6 1EE, UK
- School of Biological Sciences, University of Reading, Reading, UK
| | - Ian M. Jones
- School of Biological Sciences, University of Reading, Reading, UK
| | | |
Collapse
|
24
|
Tong X, Ga L, Zhao R, Ai J. Research progress on the applications of paper chips. RSC Adv 2021; 11:8793-8820. [PMID: 35423393 PMCID: PMC8695313 DOI: 10.1039/d0ra10470a] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/13/2020] [Accepted: 01/29/2021] [Indexed: 01/12/2023] Open
Abstract
Due to the modern pursuit of the quality of life, science and technology have rapidly developed, resulting in higher requirements for various detection methods based on analytical technology. Herein, the development, fabrication, detection and application of paper-based microfluidic chips (μPAD) are summarized. We aim to provide a comprehensive understanding of paper chips, and then discuss challenges and future prospects in this field.
Collapse
Affiliation(s)
- Xin Tong
- College of Chemistry and Enviromental Science, Inner Mongolia Key Laboratory of Green Catalysis, Inner Mongolia Normal University 81 zhaowudalu Hohhot 010022 China
| | - Lu Ga
- College of Pharmacy, Inner Mongolia Medical University, Jinchuankaifaqu Hohhot 010110 China
| | - Ruiguo Zhao
- College of Chemistry and Chemical Engineering of Inner Mongolia University Hohhot 010020 China
| | - Jun Ai
- College of Chemistry and Enviromental Science, Inner Mongolia Key Laboratory of Green Catalysis, Inner Mongolia Normal University 81 zhaowudalu Hohhot 010022 China
| |
Collapse
|
25
|
Biosensors Based on Isothermal DNA Amplification for Bacterial Detection in Food Safety and Environmental Monitoring. SENSORS 2021; 21:s21020602. [PMID: 33467078 PMCID: PMC7831002 DOI: 10.3390/s21020602] [Citation(s) in RCA: 37] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/16/2020] [Revised: 01/11/2021] [Accepted: 01/14/2021] [Indexed: 02/06/2023]
Abstract
The easy and rapid spread of bacterial contamination and the risk it poses to human health makes evident the need for analytical methods alternative to conventional time-consuming laboratory-based techniques for bacterial detection. To tackle this demand, biosensors based on isothermal DNA amplification methods have emerged, which avoid the need for thermal cycling, thus facilitating their integration into small and low-cost devices for in situ monitoring. This review focuses on the breakthroughs made on biosensors based on isothermal amplification methods for the detection of bacteria in the field of food safety and environmental monitoring. Optical and electrochemical biosensors based on loop mediated isothermal amplification (LAMP), rolling circle amplification (RCA), recombinase polymerase amplification (RPA), helicase dependent amplification (HDA), strand displacement amplification (SDA), and isothermal strand displacement polymerisation (ISDPR) are described, and an overview of their current advantages and limitations is provided. Although further efforts are required to harness the potential of these emerging analytical techniques, the coalescence of the different isothermal amplification techniques with the wide variety of biosensing detection strategies provides multiple possibilities for the efficient detection of bacteria far beyond the laboratory bench.
Collapse
|
26
|
Sachdeva S, Davis RW, Saha AK. Microfluidic Point-of-Care Testing: Commercial Landscape and Future Directions. Front Bioeng Biotechnol 2021; 8:602659. [PMID: 33520958 PMCID: PMC7843572 DOI: 10.3389/fbioe.2020.602659] [Citation(s) in RCA: 101] [Impact Index Per Article: 33.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2020] [Accepted: 12/15/2020] [Indexed: 12/23/2022] Open
Abstract
Point-of-care testing (POCT) allows physicians to detect and diagnose diseases at or near the patient site, faster than conventional lab-based testing. The importance of POCT is considerably amplified in the trying times of the COVID-19 pandemic. Numerous point-of-care tests and diagnostic devices are available in the market including, but not limited to, glucose monitoring, pregnancy and infertility testing, infectious disease testing, cholesterol testing and cardiac markers. Integrating microfluidics in POCT allows fluid manipulation and detection in a singular device with minimal sample requirements. This review presents an overview of two technologies - (a.) Lateral Flow Assay (LFA) and (b.) Nucleic Acid Amplification - upon which a large chunk of microfluidic POCT diagnostics is based, some of their applications, and commercially available products. Apart from this, we also delve into other microfluidic-based diagnostics that currently dominate the in-vitro diagnostic (IVD) market, current testing landscape for COVID-19 and prospects of microfluidics in next generation diagnostics.
Collapse
Affiliation(s)
| | | | - Amit K. Saha
- Genome Technology Center, School of Medicine, Stanford University, Palo Alto, CA, United States
| |
Collapse
|
27
|
Affiliation(s)
- Masaru Mitsushio
- Department of Chemistry, Biotechnology, and Chemical Engineering, Graduate School of Science and Engineering, Kagoshima University, 1-21-40 Korimoto, Kagoshima, Kagoshima, 890-0065, Japan
| |
Collapse
|
28
|
Sargazi M, Kaykhaii M. Application of a smartphone based spectrophotometer for rapid in-field determination of nitrite and chlorine in environmental water samples. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2020; 227:117672. [PMID: 31669937 DOI: 10.1016/j.saa.2019.117672] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2019] [Revised: 10/09/2019] [Accepted: 10/15/2019] [Indexed: 06/10/2023]
Abstract
In this paper, a low cost and portable smartphone-based spectrophotometer with the purpose of measuring trace levels of two important anions, chlorine and nitrite ions in water samples, is introduced. This home-made spectrophotometer is made of Plexiglas, equipped with two LEDs as a light source, and a piece of DVD is acted as light dispersing element. Battery of smartphone was used as its power supply and spectral analysis was performed by a free software downloadable from Google Playstore. By using this lightweight spectrophotometer, various environmental samples were analyzed for their NO2- and Cl2 content in field. Good detection limits of 5.00 × 10-2 mg L-1 and 8.60 × 10-3 mg L-1 were obtained for chlorine and nitrite, respectively. The linear range for chlorine was 1.00-4.00 mg L-1 and this range for nitrite was 0.05-1.20 mg L-1. Reproducibility as relative standard deviation for both chlorine and nitrite was better than 8.75%. In order to investigate validity of data, results were compared to standard methods of measuring chlorine and nitrite, using both spectrophotometry and commercial kits which showed no difference between results obtained. This very simple to use and inexpensive device can be used many times, so can be considered as a low-cost alternative to the detection device of commercial kits.
Collapse
Affiliation(s)
- Mona Sargazi
- Department of Chemistry, Faculty of Sciences, University of Sistan and Baluchestan, Zahedan, 98135-674, Iran
| | - Massoud Kaykhaii
- Department of Chemistry, Faculty of Sciences, University of Sistan and Baluchestan, Zahedan, 98135-674, Iran; Smartphone Analytical Sensors Research Centre, University of Sistan and Baluchestan, Zahedan, Iran.
| |
Collapse
|
29
|
Li R, Chen J, Zhang X, Cui J, Tao S, Yang L. Mini-Disk Capillary Array Coupling with LAMP for Visual Detection of Multiple Nucleic Acids using Genetically Modified Organism Analysis as an Example. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY 2020; 68:899-906. [PMID: 31891505 DOI: 10.1021/acs.jafc.9b06979] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Convenient, portable, and low-cost multiplex nucleic acid testing (NAT) systems are the trends in the fields of food safety, environmental microorganisms, molecular diagnosis, etc. In this study, we developed a novel system for visual monitoring of multiple nucleic acids combining a mini-disk capillary array (diameter = 17 mm, embedded with 6-10 capillaries), visual loop-mediated isothermal amplification (LAMP), and quick DNA extraction called mDC-LAMP. The performance and applicability of mDC-LAMP in testing multiple nucleic acids were evaluated and verified employing genetically modified contents analysis as an example. All of the results confirmed that mDC-LAMP has the advantages of high specificity without any cross contamination, high sensitivity with a limit of detection of 25 copies/reaction, high throughput with flexible channel sensors, easy fabrication, and low costs. We believe that mDC-LAMP is a competitive choice for on-spot monitoring of multiple nucleic acids in terms of the easy fabrication/operation, low costs, and suitable performance presented in the nucleic acids test.
Collapse
Affiliation(s)
- Rong Li
- Joint International Research Laboratory of Metabolic and Developmental Sciences, School of Life Sciences and Biotechnology , Shanghai Jiao Tong University , Shanghai 200240 , China
| | - Jianwei Chen
- Shanghai Center for Systems Biomedicine, Key Laboratory of Systems Biomedicine (Ministry of Education), State Key Laboratory of Oncogenes and Related Genes, School of Biomedical Engineering , Shanghai Jiao Tong University , Shanghai 200240 , China
| | - Xiujie Zhang
- Development Center of Science and Technology , Ministry of Agriculture of People's Republic of China , Beijing 100025 , China
| | - Jingjie Cui
- Institute of Cotton Research , Chinese Academy of Agricultural Sciences/State Key Laboratory of Cotton Biology , Anyang 455000 , Henan , China
| | - Shengce Tao
- Shanghai Center for Systems Biomedicine, Key Laboratory of Systems Biomedicine (Ministry of Education), State Key Laboratory of Oncogenes and Related Genes, School of Biomedical Engineering , Shanghai Jiao Tong University , Shanghai 200240 , China
| | - Litao Yang
- Joint International Research Laboratory of Metabolic and Developmental Sciences, School of Life Sciences and Biotechnology , Shanghai Jiao Tong University , Shanghai 200240 , China
- Institute of Cotton Research , Chinese Academy of Agricultural Sciences/State Key Laboratory of Cotton Biology , Anyang 455000 , Henan , China
| |
Collapse
|
30
|
Li Y, Ma X, Wang W, Yan S, Liu F, Chu K, Xu G, Smith ZJ. Improving the limit of detection in portable luminescent assay readers through smart optical design. JOURNAL OF BIOPHOTONICS 2020; 13:e201900241. [PMID: 31602762 DOI: 10.1002/jbio.201900241] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/20/2019] [Revised: 10/07/2019] [Accepted: 10/09/2019] [Indexed: 06/10/2023]
Abstract
Critical biomarkers of disease are increasingly being detected by point-of-care assays. Chemiluminescence (CL) and electrochemiluminescence (ECL) are often used in such assays due to their convenience and that they do not require light sources or other components that could complicate or add cost to the system. Reports of these assays often include readers built on a cellphone platform or constructed from low-cost components. However, the impact the optical design has on the limit of detection (LOD) in these systems remains unexamined. Here, we report a theoretical rubric to evaluate different optical designs in terms of maximizing the use of photons emitted from a CL or ECL assay to improve the LOD. We demonstrate that the majority of cellphone designs reported in the literature are not optimized, in part due to misunderstandings of the optical tradeoffs in collection systems, and in part due to limitations imposed on the designs arising from the use of a mobile phone with a very small lens aperture. Based on the theoretical rubric, we design a new portable reader built using off-the-shelf condenser optics, and demonstrate a nearly 10× performance enhancement compared to prior reports on an ECL assays running on a portable chip.
Collapse
Affiliation(s)
- Yaning Li
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, Anhui, China
- Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, University of Science and Technology of China, Hefei, Anhui, China
| | - Xiangui Ma
- A State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin, China
- University of Science and Technology of China, School of Applied Chemistry and Engineering, Hefei, Anhui, China
| | - Wenhe Wang
- A State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin, China
- University of Science and Technology of China, School of Applied Chemistry and Engineering, Hefei, Anhui, China
| | - Shaojie Yan
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, Anhui, China
- Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, University of Science and Technology of China, Hefei, Anhui, China
| | - Fangshuo Liu
- A State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin, China
- University of Science and Technology of China, School of Applied Chemistry and Engineering, Hefei, Anhui, China
| | - Kaiqin Chu
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, Anhui, China
- Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, University of Science and Technology of China, Hefei, Anhui, China
- Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei, Anhui, China
| | - Guobao Xu
- A State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin, China
- University of Science and Technology of China, School of Applied Chemistry and Engineering, Hefei, Anhui, China
| | - Zachary J Smith
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, Anhui, China
- Key Laboratory of Precision Scientific Instrumentation of Anhui Higher Education Institutes, University of Science and Technology of China, Hefei, Anhui, China
| |
Collapse
|
31
|
Karayannis P, Petrakli F, Gkika A, Koumoulos EP. 3D-Printed Lab-on-a-Chip Diagnostic Systems-Developing a Safe-by-Design Manufacturing Approach. MICROMACHINES 2019; 10:E825. [PMID: 31795128 PMCID: PMC6969929 DOI: 10.3390/mi10120825] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/31/2019] [Revised: 11/13/2019] [Accepted: 11/25/2019] [Indexed: 12/12/2022]
Abstract
The aim of this study is to provide a detailed strategy for Safe-by-Design (SbD) 3D-printed lab-on-a-chip (LOC) device manufacturing, using Fused Filament Fabrication (FFF) technology. First, the applicability of FFF in lab-on-a-chip device development is briefly discussed. Subsequently, a methodology to categorize, identify and implement SbD measures for FFF is suggested. Furthermore, the most crucial health risks involved in FFF processes are examined, placing the focus on the examination of ultrafine particle (UFP) and Volatile Organic Compound (VOC) emission hazards. Thus, a SbD scheme for lab-on-a-chip manufacturing is provided, while also taking into account process optimization for obtaining satisfactory printed LOC quality. This work can serve as a guideline for the effective application of FFF technology for lab-on-a-chip manufacturing through the safest applicable way, towards a continuous effort to support sustainable development of lab-on-a-chip devices through cost-effective means.
Collapse
Affiliation(s)
| | | | | | - Elias P. Koumoulos
- Innovation in Research & Engineering Solutions (IRES), Boulevard Edmond Machtens 79/22, 1080 Brussels, Belgium; (P.K.); (F.P.); (A.G.)
| |
Collapse
|
32
|
Suntornsuk W, Suntornsuk L. Recent applications of paper‐based point‐of‐care devices for biomarker detection. Electrophoresis 2019; 41:287-305. [DOI: 10.1002/elps.201900258] [Citation(s) in RCA: 32] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/14/2019] [Revised: 09/30/2019] [Accepted: 10/05/2019] [Indexed: 12/12/2022]
Affiliation(s)
- Worapot Suntornsuk
- Department of Microbiology, Faculty of ScienceKing Mongkut's University of Technology Thonburi Bangkok Thailand
| | - Leena Suntornsuk
- Department of Pharmaceutical ChemistryFaculty of PharmacyMahidol University Bangkok Thailand
| |
Collapse
|
33
|
Kang W, Huang H, Cai M, Li Y, Hou W, Yun F, Wu X, Xue L, Wang S, Liu F. On-site cell concentration and viability detections using smartphone based field-portable cell counter. Anal Chim Acta 2019; 1077:216-224. [DOI: 10.1016/j.aca.2019.05.029] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2018] [Revised: 04/20/2019] [Accepted: 05/13/2019] [Indexed: 12/30/2022]
|
34
|
Li Y, Zheng R, Wu Y, Chu K, Xu Q, Sun M, Smith ZJ. A low-cost, automated parasite diagnostic system via a portable, robotic microscope and deep learning. JOURNAL OF BIOPHOTONICS 2019; 12:e201800410. [PMID: 31081258 DOI: 10.1002/jbio.201800410] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/06/2018] [Revised: 05/07/2019] [Accepted: 05/10/2019] [Indexed: 06/09/2023]
Abstract
Manual hand counting of parasites in fecal samples requires costly components and substantial expertise, limiting its use in resource-constrained settings and encouraging overuse of prophylactic medication. To address this issue, a cost-effective, automated parasite diagnostic system that does not require special sample preparation or a trained user was developed. It is composed of an inexpensive (~US$350), portable, robotic microscope that can scan over the size of an entire McMaster chamber (100 mm2 ) and capture high-resolution (~1 μm lateral resolution) bright field images without need for user intervention. Fecal samples prepared using the McMaster flotation method were imaged, with the imaging region comprising the entire McMaster chamber. These images are then automatically segmented and analyzed using a trained convolution neural network (CNN) to robustly separate eggs from background debris. Simple postprocessing of the CNN output yields both egg species and egg counts. The system was validated by comparing accuracy with hand-counts by a trained operator, with excellent performance. As a further demonstration of utility, the system was used to conveniently quantify drug response over time in a single animal, showing residual disease due to Anthelmintic resistance after 2 weeks.
Collapse
Affiliation(s)
- Yaning Li
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, China
| | - Rui Zheng
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, China
| | - Yizhen Wu
- Anhui Agricultural University, Department of Animal Science and Technology, Hefei, China
| | - Kaiqin Chu
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, China
| | - Qianming Xu
- Anhui Agricultural University, Department of Animal Science and Technology, Hefei, China
| | - Mingzhai Sun
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, China
| | - Zachary J Smith
- University of Science and Technology of China, Department of Precision Machinery and Precision Instrumentation, Hefei, China
| |
Collapse
|
35
|
Tran MV, Susumu K, Medintz IL, Algar WR. Supraparticle Assemblies of Magnetic Nanoparticles and Quantum Dots for Selective Cell Isolation and Counting on a Smartphone-Based Imaging Platform. Anal Chem 2019; 91:11963-11971. [DOI: 10.1021/acs.analchem.9b02853] [Citation(s) in RCA: 25] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022]
Affiliation(s)
- Michael V. Tran
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia V6T 1Z1, Canada
| | - Kimihiro Susumu
- KeyW Corporation, Hanover, Maryland 21076, United States
- Optical Sciences Division, Code 5600, U.S. Naval Research Laboratory, Washington, D.C. 20375, United States
| | - Igor L. Medintz
- Center for Bio/Molecular Science and Engineering, Code 6900, U.S. Naval Research Laboratory, Washington, D.C. 20375, United States
| | - W. Russ Algar
- Department of Chemistry, University of British Columbia, 2036 Main Mall, Vancouver, British Columbia V6T 1Z1, Canada
| |
Collapse
|
36
|
Kong T, You JB, Zhang B, Nguyen B, Tarlan F, Jarvi K, Sinton D. Accessory-free quantitative smartphone imaging of colorimetric paper-based assays. LAB ON A CHIP 2019; 19:1991-1999. [PMID: 31044203 DOI: 10.1039/c9lc00165d] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
The combination of smartphone technology and colorimetric paper-based microfluidics can enable simple, inexpensive diagnostics. However, imaging colorimetric diagnostic results via smartphones currently requires accessories to mitigate the influence of variability in surrounding lighting conditions. Here, we present an accessory-free smartphone-based colorimetric imaging method that enlists the built-in LED light source to dominate ambient lighting in combination with background and colour rescaling. This simple approach enables quantitative measurements from paper-based tests by compensating for different environmental lighting conditions and is universally applicable with respect to phone models and manufacturers. We demonstrate the method with three dominant phone makes and models in a cell counting application with a paper-based yeast detection device. The detection results are in good agreement with cell counting using automated cell counters. Eliminating the need for make/model specific accessories, this approach helps realize the potential for low-cost, broadly applicable paper-based diagnostics.
Collapse
Affiliation(s)
- Tian Kong
- Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario, M5S 3G8 Canada.
| | - Jae Bem You
- Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario, M5S 3G8 Canada.
| | - Biao Zhang
- Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario, M5S 3G8 Canada. and Key Laboratory of Low-grade Energy Utilization Technologies and Systems, Chongqing University, Chongqing 400044, China
| | - Brian Nguyen
- Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario, M5S 3G8 Canada.
| | - Farhang Tarlan
- Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario, M5S 3G8 Canada.
| | - Keith Jarvi
- Department of Surgery, Division of Urology, Mount Sinai Hospital, University of Toronto, 600 University Avenue, Toronto, Ontario, M5G 1X5 Canada
| | - David Sinton
- Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario, M5S 3G8 Canada.
| |
Collapse
|
37
|
Hadikhani P, Borhani N, H Hashemi SM, Psaltis D. Learning from droplet flows in microfluidic channels using deep neural networks. Sci Rep 2019; 9:8114. [PMID: 31148559 PMCID: PMC6544611 DOI: 10.1038/s41598-019-44556-x] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2019] [Accepted: 05/17/2019] [Indexed: 12/11/2022] Open
Abstract
A non-intrusive method is presented for measuring different fluidic properties in a microfluidic chip by optically monitoring the flow of droplets. A neural network is used to extract the desired information from the images of the droplets. We demonstrate the method in two applications: measurement of the concentration of each component of a water/alcohol mixture, and measurement of the flow rate of the same mixture. A large number of droplet images are recorded and used to train deep neural networks (DNN) to predict the flow rate or the concentration. It is shown that this method can be used to quantify the concentrations of each component with a 0.5% accuracy and the flow rate with a resolution of 0.05 ml/h. The proposed method can in principle be used to measure other properties of the fluid such as surface tension and viscosity.
Collapse
Affiliation(s)
- Pooria Hadikhani
- Optics Laboratory, School of Engineering, Swiss Federal Institute of Technology Lausanne (EPFL), CH-1015, Lausanne, Switzerland.
| | - Navid Borhani
- Optics Laboratory, School of Engineering, Swiss Federal Institute of Technology Lausanne (EPFL), CH-1015, Lausanne, Switzerland
| | - S Mohammad H Hashemi
- Optics Laboratory, School of Engineering, Swiss Federal Institute of Technology Lausanne (EPFL), CH-1015, Lausanne, Switzerland
- Computational Science & Engineering Laboratory, ETH Zurich, Zurich, Switzerland
| | - Demetri Psaltis
- Optics Laboratory, School of Engineering, Swiss Federal Institute of Technology Lausanne (EPFL), CH-1015, Lausanne, Switzerland
| |
Collapse
|
38
|
Srinivasan B, Finkelstein JL, O'Dell D, Erickson D, Mehta S. Rapid diagnostics for point-of-care quantification of soluble transferrin receptor. EBioMedicine 2019; 42:504-510. [PMID: 30885726 PMCID: PMC6491390 DOI: 10.1016/j.ebiom.2019.03.017] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/08/2019] [Revised: 03/04/2019] [Accepted: 03/07/2019] [Indexed: 11/21/2022] Open
Abstract
BACKGROUND Iron deficiency (ID) and anaemia are major health concerns, particularly in young children. Screening for ID based on haemoglobin (Hb) concentration alone has been shown to lack sensitivity and specificity. The American Academy of Pediatrics (AAP) recommends soluble transferrin receptor (sTfR) as a promising approach to screen for iron deficiency. However, in most settings, assessment of iron status requires access to centralized laboratories. There is an urgent need for rapid, sensitive, and affordable diagnostics for sTfR at the point-of-care. METHODS An immunochromatographic assay-based point-of-care screening device was developed for rapid quantification of sTfR from a drop of serum within a few minutes. Performance optimization of the assay was done in sTfR-spiked buffer and commercially available sTfR calibrator, followed by a small-scale proof-of-concept validation with archived serum samples. FINDINGS On preliminary testing with archived serum samples and comparison with Ramco ELISA, a correlation of 0.93 (P < 0.0001) was observed, demonstrating its potential for point-of-care assessment of iron status. INTERPRETATION The analytical performance of the point-of-care sTfR screening device indicates the potential for application in home-use test kits and field settings, especially in low- and middle-income settings. An added advantage of sTfR quantification in combination with our previously reported serum ferritin diagnostics is in integration of Cook's equation as a quantitative and minimally-invasive indicator of total body iron stores. FUND: Thrasher Research Fund (Early Career Award #13379), NIH R03 EB 023190, NSF grant #1343058, and Nutrition International (project #10-8007-CORNE-01).
Collapse
Affiliation(s)
- Balaji Srinivasan
- Division of Nutritional Sciences, Cornell University, Ithaca, NY, USA; Institute for Nutritional Sciences, Global Health, and Technology (INSiGHT), Cornell University, Ithaca, NY, USA
| | - Julia L Finkelstein
- Division of Nutritional Sciences, Cornell University, Ithaca, NY, USA; Institute for Nutritional Sciences, Global Health, and Technology (INSiGHT), Cornell University, Ithaca, NY, USA
| | | | - David Erickson
- Division of Nutritional Sciences, Cornell University, Ithaca, NY, USA; Institute for Nutritional Sciences, Global Health, and Technology (INSiGHT), Cornell University, Ithaca, NY, USA; Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY, USA.
| | - Saurabh Mehta
- Division of Nutritional Sciences, Cornell University, Ithaca, NY, USA; Institute for Nutritional Sciences, Global Health, and Technology (INSiGHT), Cornell University, Ithaca, NY, USA.
| |
Collapse
|
39
|
Cui X, Ren L, Shan Y, Wang X, Yang Z, Li C, Xu J, Ma B. Smartphone-based rapid quantification of viable bacteria by single-cell microdroplet turbidity imaging. Analyst 2019; 143:3309-3316. [PMID: 29774899 DOI: 10.1039/c8an00456k] [Citation(s) in RCA: 22] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
Abstract
Standard plate count (SPC) has been recognized as the golden standard for the quantification of viable bacteria. However, SPC usually takes one to several days to grow individual cells into a visible colony, which greatly hampers its application in rapid bacteria enumeration. Here we present a microdroplet turbidity imaging based digital standard plate count (dSPC) method to overcome this hurdle. Instead of cultivating on agar plates, bacteria are encapsulated in monodisperse microdroplets for single-cell cultivation. Proliferation of the encapsulated bacterial cell produced a detectable change in microdroplet turbidity, which allowed, after just a few bacterial doubling cycles (i.e., a few hours), enumeration of viable bacteria by visible-light imaging. Furthermore, a dSPC platform integrating a power-free droplet generator with smartphone-based turbidity imaging was established. As proof-of-concept demonstrations, a series of Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Bacillus subtilis) samples were quantified via the smartphone dSPC accurately within 6 hours, representing a detection sensitivity of 100 CFU ml-1 and at least 3 times faster. In addition, Enterobacter sakazakii (E. sakazakii) in infant milk powder as a real sample was enumerated within 6 hours, in contrast to the 24 hours needed in traditional SPC. Results with high accuracy and reproducibility were achieved, with no difference in counts found between dSPC and SPC. By enabling label-free, rapid, portable and low-cost enumeration and cultivation of viable bacteria onsite, smartphone dSPC forms the basis for a temporally and geographically trackable network for surveying live microbes globally where every citizen with a cellphone can contribute anytime and anywhere.
Collapse
Affiliation(s)
- Xiaonan Cui
- Single-Cell Center, CAS Key Laboratory of Biofuels and Shandong Key Laboratory of Energy Genetics, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, Shandong, 266101, China.
| | | | | | | | | | | | | | | |
Collapse
|
40
|
Riordon J, Sovilj D, Sanner S, Sinton D, Young EW. Deep Learning with Microfluidics for Biotechnology. Trends Biotechnol 2019; 37:310-324. [DOI: 10.1016/j.tibtech.2018.08.005] [Citation(s) in RCA: 113] [Impact Index Per Article: 22.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2018] [Revised: 08/22/2018] [Accepted: 08/23/2018] [Indexed: 12/13/2022]
|
41
|
Oeschger T, McCloskey D, Kopparthy V, Singh A, Erickson D. Point of care technologies for sepsis diagnosis and treatment. LAB ON A CHIP 2019; 19:728-737. [PMID: 30724931 PMCID: PMC6392004 DOI: 10.1039/c8lc01102h] [Citation(s) in RCA: 38] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
Sepsis is a rapidly progressing, life threatening immune response triggered by infection that affects millions worldwide each year. Current clinical diagnosis relies on broad physiological parameters and time consuming lab-based cell culture. If proper treatment is not provided, cases of sepsis can drastically increase in severity over the course of a few hours. Development of new point of care tools for sepsis has the potential to improve diagnostic speed and accuracy, leading to prompt administration of appropriate therapeutics, thereby reducing healthcare costs and improving patient outcomes. In this review we examine developing and commercially available technologies to assess the feasibility of rapid, accurate sepsis diagnosis, with emphasis on point of care.
Collapse
Affiliation(s)
- Taylor Oeschger
- Meinig School of Biomedical Engineering, Cornell University, Ithaca, NY 14853, USA
| | - Duncan McCloskey
- Meinig School of Biomedical Engineering, Cornell University, Ithaca, NY 14853, USA
| | - Varun Kopparthy
- Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853, USA
| | - Ankur Singh
- Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853, USA
| | - David Erickson
- Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY 14853, USA
- Division of Nutritional Sciences, Cornell University, Ithaca, NY 14853, USA
| |
Collapse
|
42
|
Theillet G, Grard G, Galla M, Maisse C, Enguehard M, Cresson M, Dalbon P, Leparc-Goffart IL, Bedin F. Detection of chikungunya virus-specific IgM on laser-cut paper-based device using pseudo-particles as capture antigen. J Med Virol 2019; 91:899-910. [PMID: 30734316 DOI: 10.1002/jmv.25420] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/22/2018] [Revised: 01/21/2019] [Accepted: 01/23/2019] [Indexed: 01/11/2023]
Abstract
The incidence of arbovirus infections has increased dramatically in recent decades, affecting hundreds of millions of people each year. The Togaviridae family includes the chikungunya virus (CHIKV), which is typically transmitted by Aedes mosquitoes and causes a wide range of symptoms from flu-like fever to severe arthralgia. Although conventional diagnostic tests can provide early diagnosis of CHIKV infections, access to these tests is often limited in developing countries. Consequently, there is an urgent need to develop efficient, affordable, simple, rapid, and robust diagnostic tools that can be used in point-of-care settings. Early diagnosis is crucial to improve patient management and to reduce the risk of complications. A glass-fiber laser-cut microfluidic device (paper-based analytical device [PAD]) was designed and evaluated in a proof of principle context, for the analysis of 30 µL of patient serum. Biological raw materials used for the functionalization of the PAD were first screened by MAC-ELISA (IgM capture enzyme-linked immunosorbent assay) for CHIKV Immunoglobulin M (IgM) capture and then evaluated on the PAD using various human samples. Compared with viral lysate traditionally used for chikungunya (CHIK) serology, CHIKV pseudo-particles (PPs) have proven to be powerful antigens for specific IgM capture. The PAD was able to detect CHIKV IgM in human sera in less than 10 minutes. Results obtained in patient sera showed a sensitivity of 70.6% and a specificity of around 98%. The PAD showed few cross-reactions with other tropical viral diseases. The PAD could help health workers in the early diagnosis of tropical diseases such as CHIK, which require specific management protocols in at-risk populations.
Collapse
Affiliation(s)
- Gerald Theillet
- bioMérieux, Innovations New Immuno-Concepts department, Chemin de l'Orme, Marcy-l'Etoile, France.,Unité des Virus Emergents (UVE: Aix-Marseille Univ, IRD 190, Inserm 1207, IHU Méditerranée Infection), Marseille, France
| | - Gilda Grard
- Unité des Virus Emergents (UVE: Aix-Marseille Univ, IRD 190, Inserm 1207, IHU Méditerranée Infection), Marseille, France.,IRBA, Unité de virologie, CNR des Arbovirus, HIA Laveran, Marseille, France
| | - Mathilde Galla
- Unité des Virus Emergents (UVE: Aix-Marseille Univ, IRD 190, Inserm 1207, IHU Méditerranée Infection), Marseille, France.,IRBA, Unité de virologie, CNR des Arbovirus, HIA Laveran, Marseille, France
| | - Carine Maisse
- Infections Virales et Pathologie Comparée, UMR754, INRA, Univ Claude Bernard Lyon1, Lyon, France
| | - Margot Enguehard
- Ecologie Microbienne CNRS UMR 5557, INRA UMR1418, Villeurbanne, France.,CAS Key Laboratory of Molecular Virology and Immunology, Unit of Interspecies transmission of arboviruses and antivirals, Institut Pasteur of Shanghai, Shanghai Institutes for Biological Sciences, Chinese Academy of Sciences, Shanghai, China
| | - Marie Cresson
- CAS Key Laboratory of Molecular Virology and Immunology, Unit of Interspecies transmission of arboviruses and antivirals, Institut Pasteur of Shanghai, Shanghai Institutes for Biological Sciences, Chinese Academy of Sciences, Shanghai, China.,IVPC UMR754, INRA, Univ Lyon, Université Claude Bernard Lyon 1, EPHE, PSL Research University, Lyon, France
| | - Pascal Dalbon
- bioMérieux, Innovations New Immuno-Concepts department, Chemin de l'Orme, Marcy-l'Etoile, France
| | - Isabelle Leparc Leparc-Goffart
- Unité des Virus Emergents (UVE: Aix-Marseille Univ, IRD 190, Inserm 1207, IHU Méditerranée Infection), Marseille, France.,IRBA, Unité de virologie, CNR des Arbovirus, HIA Laveran, Marseille, France
| | - Frederic Bedin
- bioMérieux, Innovations New Immuno-Concepts department, Chemin de l'Orme, Marcy-l'Etoile, France
| |
Collapse
|
43
|
Hamid SB, Hamid AFA. Roles of Nutraceuticals and Functional Food in Prevention of Cardiovascular Disease. NUTRACEUTICAL AND FUNCTIONAL FOODS IN DISEASE PREVENTION 2019:126-165. [DOI: 10.4018/978-1-5225-3267-5.ch005] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/02/2023]
Abstract
The chapter provides an overview of cardiovascular disease, a major cause of mortality worldwide. It relates economic and social impacts to the disease, especially in developing countries. One of the approaches to addressing this challenge is increasing awareness within society, through implementation of education programs. It is important for society to understand the types and roles of the risk factors leading to cardiovascular disease. Emphasis is on the role of functional food and nutraceuticals as dietary sources that could prevent development of cardiovascular disease. The chapter highlights roles of nutraceuticals and functional food sources from medical plants, seeds, berries, and tropical fruits in lowering risk factors. Key findings from trials conducted in Asia, China, Europe, and America provide supporting evidence for the importance of functional food to health, and its potential for modifying the level of risk factors related to cardiovascular diseases.
Collapse
|
44
|
Li J, Wang X, Shan Y, Huang H, Jian D, Xue L, Wang S, Liu F. Handheld Inkjet Printing Paper Chip Based Smart Tetracycline Detector. MICROMACHINES 2019; 10:E27. [PMID: 30609683 PMCID: PMC6356201 DOI: 10.3390/mi10010027] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/25/2018] [Revised: 12/20/2018] [Accepted: 12/27/2018] [Indexed: 12/12/2022]
Abstract
Tetracycline is widely used as medicine for disease treatments and additives in animal feeding. Unfortunately, the abuse of tetracycline inevitably causes tetracycline residue in animal-origin foods. Though classical methods can detect tetracycline in high sensitivity and precision, they often rely on huge and expensive setups as well as complicated and time-consuming operations, limiting their applications in rapid and on-site detection. Here, we propose a handheld inkjet printing paper chip based smart tetracycline detector: tetracycline can be determined by inkjet printing prepared paper chip based enzyme-linked immunosorbent assay (ELISA) with the advantages of high sensitivity, excellent specificity and low cost; moreover, a smartphone based paper chip reader and application is designed for automatically determining tetracycline with simple operations, high precision and fast speed. The smart tetracycline detector with a compact size of 154 mm × 80 mm × 50 mm and self-supplied internal power can reach a rather low detection limit of ~0.05 ng/mL, as proved by practical measurements. It is believed the proposed handheld inkjet printing paper chip based smart tetracycline detector is a potential tool in antibiotic sensing for routine uses at home and on-site detection in the field.
Collapse
Affiliation(s)
- Jiahao Li
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing 210095, Jiangsu, China.
| | - Xin Wang
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing 210095, Jiangsu, China.
| | - Yanke Shan
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing 210095, Jiangsu, China.
| | - Huachuan Huang
- School of Manufacturing Science and Engineering, Southwest University of Science and Technology, Mianyang 621010, Sichuan, China.
| | - Dan Jian
- Computational Optics Laboratory, School of Science, Jiangnan University, Wuxi 214122, Jiangsu, China.
| | - Liang Xue
- College of Electronics and Information Engineering, Shanghai University of Electric Power, Shanghai 200090, China.
| | - Shouyu Wang
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing 210095, Jiangsu, China.
- Computational Optics Laboratory, School of Science, Jiangnan University, Wuxi 214122, Jiangsu, China.
| | - Fei Liu
- Joint International Research Laboratory of Animal Health and Food Safety of Ministry of Education & Single Molecule Nanometry Laboratory (Sinmolab), Nanjing Agricultural University, Nanjing 210095, Jiangsu, China.
| |
Collapse
|
45
|
Yang K, Wu J, Santos S, Liu Y, Zhu L, Lin F. Recent development of portable imaging platforms for cell-based assays. Biosens Bioelectron 2019; 124-125:150-160. [DOI: 10.1016/j.bios.2018.10.024] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2018] [Revised: 10/06/2018] [Accepted: 10/13/2018] [Indexed: 12/22/2022]
|
46
|
Abstract
Until very recently, handheld spectrometers were the domain of major analytical and security instrument companies, with turnkey analyzers using spectroscopic techniques from X-ray fluorescence (XRF) for elemental analysis (metals), to Raman, mid-infrared, and near-infrared (NIR) for molecular analysis (mostly organics). However, the past few years have seen rapid changes in this landscape with the introduction of handheld laser-induced breakdown spectroscopy (LIBS), smartphone spectroscopy focusing on medical diagnostics for low-resource areas, commercial engines that a variety of companies can build up into products, hyphenated or dual technology instruments, low-cost visible-shortwave NIR instruments selling directly to the public, and, most recently, portable hyperspectral imaging instruments. Successful handheld instruments are designed to give answers to non-scientist operators; therefore, their developers have put extensive resources into reliable identification algorithms, spectroscopic libraries or databases, and qualitative and quantitative calibrations. As spectroscopic instruments become smaller and lower cost, "engines" have emerged, leading to the possibility of being incorporated in consumer devices and smart appliances, part of the Internet of Things (IOT). This review outlines the technologies used in portable spectroscopy, discusses their applications, both qualitative and quantitative, and how instrument developers and vendors have approached giving actionable answers to non-scientists. It outlines concerns on crowdsourced data, especially for heterogeneous samples, and finally looks towards the future in areas like IOT, emerging technologies for instruments, and portable hyphenated and hyperspectral instruments.
Collapse
|
47
|
An Advanced, Silicon-Based Substrate for Sensitive Nucleic Acids Detection. SENSORS 2018; 18:s18093138. [PMID: 30227672 PMCID: PMC6165574 DOI: 10.3390/s18093138] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/14/2018] [Revised: 09/10/2018] [Accepted: 09/13/2018] [Indexed: 02/07/2023]
Abstract
Surface substrate and chemical functionalization are crucial aspects for the fabrication of the sensitive biosensor based on microarray technology. In this paper, an advanced, silicon-based substrate (A-MA) allowing enhancement of optical signal for microarray application is described. The substrate consists in a multilayer of Si/Al/SiO2 layers. The optical signal enhancement is reached by a combination of the mirror effect of Al film and the SiO2 thickness around 830 nm, which is able to reach the maximum of interference for the emission wavelength of the Cy5 fluorescent label. Moreover, SiO2 layer is suitable for the immobilization of single-strand DNA through standard silane chemistry, and probe densities of about 2000 F/µm2 are reached. The microarray is investigated in the detection of HBV (Hepatitis B Virus) pathogen with analytical samples, resulting in a dynamic linear range of 0.05–0.5 nM, a sensitivity of about 18000 a.u. nM−1, and a Limit of Detection in the range of 0.031–0.043 Nm as a function of the capture probe sequence.
Collapse
|
48
|
Abstract
Point-of-care and in-field technologies for rapid, sensitive and selective detection of molecular biomarkers have attracted much interest. Rugged bioassay technology capable of fast detection of markers for pathogens and genetic diseases would in particular impact the quality of health care in the developing world, but would also make possible more extensive screening in developed countries to tackle problems such as those associated with water and food quality, and tracking of infectious organisms in hospitals and clinics. Literature trends indicate an increasing interest in the use of nanomaterials, and in particular luminescent nanoparticles, for assay development. These materials may offer attributes for development of assays and sensors that could achieve improvements in analytical figures of merit, and provide practical advantages in sensitivity and stability. There is opportunity for cost-efficiency and technical simplicity by implementation of luminescent nanomaterials as the basis for transduction technology, when combined with the use of paper substrates, and the ubiquitous availability of cell phone cameras and associated infrastructure for optical detection and transmission of results. Luminescent nanoparticles have been described for a broad range of bioanalytical targets including small molecules, oligonucleotides, peptides, proteins, saccharides and whole cells (e.g., cancer diagnostics). The luminescent nanomaterials that are described herein for paper-based bioassays include metal nanoparticles, quantum dots and lanthanide-doped nanocrystals. These nanomaterials often have broad and strong absorption and narrow emission bands that improve opportunity for multiplexed analysis, and can be designed to provide emission at wavelengths that are efficiently processed by conventional digital cameras. Luminescent nanoparticles can be embedded in paper substrates that are designed to direct fluid flow, and the resulting combination of technologies can offer competitive analytical performance at relatively low cost.
Collapse
Affiliation(s)
- Qiang Ju
- Key Laboratory of Flexible Electronics (KLOFE) & Institute of Advanced Materials (IAM), Jiangsu National Synergistic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (NanjingTech), 30 South Puzhu Road, Nanjing 211816, P.R. China. and Chemical Sensors Group, Department of Chemical and Physical Sciences, University of Toronto Mississauga, 3359 Mississauga Road, ON, Canada L5L 1C6.
| | - M Omair Noor
- Chemical Sensors Group, Department of Chemical and Physical Sciences, University of Toronto Mississauga, 3359 Mississauga Road, ON, Canada L5L 1C6.
| | - Ulrich J Krull
- Chemical Sensors Group, Department of Chemical and Physical Sciences, University of Toronto Mississauga, 3359 Mississauga Road, ON, Canada L5L 1C6.
| |
Collapse
|
49
|
Wang Y, Liu X, Chen P, Tran NT, Zhang J, Chia WS, Boujday S, Liedberg B. Smartphone spectrometer for colorimetric biosensing. Analyst 2018; 141:3233-8. [PMID: 27163736 DOI: 10.1039/c5an02508g] [Citation(s) in RCA: 71] [Impact Index Per Article: 11.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
We report on a smartphone spectrometer for colorimetric biosensing applications. The spectrometer relies on a sample cell with an integrated grating substrate, and the smartphone's built-in light-emitting diode flash and camera. The feasibility of the smartphone spectrometer is demonstrated for detection of glucose and human cardiac troponin I, the latter in conjunction with peptide-functionalized gold nanoparticles.
Collapse
Affiliation(s)
- Yi Wang
- Centre for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Drive, 637553 Singapore. and Wenzhou Institute of Biomedical and Engineering, CNITECH, Chinese Academy of Sciences, Wenzhou, 325001, PR China
| | - Xiaohu Liu
- Centre for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Drive, 637553 Singapore.
| | - Peng Chen
- Centre for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Drive, 637553 Singapore.
| | - Nhung Thi Tran
- Centre for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Drive, 637553 Singapore.
| | - Jinling Zhang
- Centre for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Drive, 637553 Singapore.
| | - Wei Sheng Chia
- Centre for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Drive, 637553 Singapore.
| | - Souhir Boujday
- Centre for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Drive, 637553 Singapore. and Sorbonne Universités, UPMC Univ Paris 6, UMR CNRS 7197, Laboratoire de Réactivité de Surface, F75005 Paris, France
| | - Bo Liedberg
- Centre for Biomimetic Sensor Science, School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Drive, 637553 Singapore.
| |
Collapse
|
50
|
Wang T, Xu G, Wu W, Wang X, Chen X, Zhou S, You F. A novel combination of quick response code and microfluidic paper-based analytical devices for rapid and quantitative detection. Biomed Microdevices 2018; 20:79. [DOI: 10.1007/s10544-018-0325-1] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
|