A Review on Cu2O-Based Composites in Photocatalysis: Synthesis, Modification, and Applications

Photocatalysis technology has the advantages of being green, clean, and environmentally friendly, and has been widely used in CO₂ reduction, hydrolytic hydrogen production, and the degradation of pollutants in water. Cu₂O has the advantages of abundant reserves, a low cost, and environmental friendliness. Based on the narrow bandgap and strong visible light absorption ability of Cu₂O, Cu₂O-based composite materials show infinite development potential in photocatalysis. However, in practical large-scale applications, Cu₂O-based composites still pose some urgent problems that need to be solved, such as the high composite rate of photogenerated carriers, and poor photocatalytic activity. This paper introduces a series of Cu₂O-based composites, based on recent reports, including pure Cu₂O and Cu₂O hybrid materials. The modification strategies of photocatalysts, critical physical and chemical parameters of photocatalytic reactions, and the mechanism for the synergistic improvement of photocatalytic performance are investigated and explored. In addition, the application and photocatalytic performance of Cu₂O-based photocatalysts in CO₂ photoreduction, hydrogen production, and water pollution treatment are discussed and evaluated. Finally, the current challenges and development prospects are pointed out, to provide guidance in applying Cu₂O-based catalysts in renewable energy utilization and environmental protection.

Ultrafast Infrared-to-Visible Photon Upconversion on Plasmon/TiO2 Solid Films

Optical upconversion via a multiphoton absorption process converts incoherent low-energy photons to shorter wavelengths. In this contribution, we report a solid-state thin film for infrared-to-visible upconversion composed of plasmonic/TiO₂ interfaces. When excited at λ = 800 nm, three photons are absorbed, leading to the excitation of TiO₂ trap states into an emissive state in the visible domain. The plasmonic nanoparticle enhances the light absorption capabilities of the semiconductor, increasing emission efficiency by 20 times. We demonstrate that the plasmonic nanoparticle only changes the optical absorption of the semiconductor; i.e., the process is purely photonic. The process occurs in the ultrafast domain (<10 ps), contrasting with molecular triplet-triplet exciton annihilation, the commonly used method in photon upconversion, in the nano- to microsecond time scales. The process utilizes pre-existing trap states within the semiconductor bandgap and involves three-photon absorption.

Bimetallic FeO x -MO x Loaded TiO2 (M = Cu, Co) Nanocomposite Photocatalysts for Complete Mineralization of Herbicides

A series of monometallic and bimetallic cocatalyst(s), comprising FeO _x , CuO _x , CoO _x , FeO _x -CuO _x , and FeO _x -CoO _x loaded TiO₂ catalysts prepared by the surface impregnation method, were investigated for the photocatalytic mineralization of the widely used four herbicides: 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP), 2,4-dichlorophenoxyacetic acid (2,4-D), and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). It was found that FeO _x -CoO _x /TiO₂ showed the highest photocatalytic efficiency toward mineralization of selected herbicides. FeO _x -CoO _x /TiO₂ achieves 92% TOC removal in 180 min, representing nearly three time activity of the benchmark PC50 TiO₂. From XPS analysis, FeOOH, CuO, and CoO were determined to be loaded onto the TiO₂ surface. The outstanding photocatalytic performance of the optimized FeO _x -CoO _x /TiO₂ sample for herbicides mineralization is due to an increased charge separation and enhanced hydroxyl radicals production monitored by diverse spectroscopies. Based on the proposed charge transfer mechanism, FeO _x -CoO _x cocatalyst species accelerate the transfer of photogenerated holes on TiO₂, thus facilitating hydroxyl radicals production.

Z-Scheme CuOx/Ag/TiO2 Heterojunction as Promising Photoinduced Anticorrosion and Antifouling Integrated Coating in Seawater

In the marine environment, steel materials usually encounter serious problems with chemical or electrochemical corrosion and fouling by proteins, bacteria, and other marine organisms. In this work, a green bifunctional Z-scheme CuO_x/Ag/P25 heterostructure coating material was designed to achieve the coordination of corrosion prevention and antifouling by matching the redox potential of the reactive oxygen species and the corrosion potential of 304SS. When CuO_x/Ag/P25 heterostructure was coupled with the protected metal, the open circuit potential under illumination negatively shifted about 240 mV (vs. Ag/AgCl) and the photoinduced current density reached 16.6 μA cm^-2. At the same time, more reactive oxygen species were produced by the Z-shape structure, and then the photocatalytic sterilization effect was stronger. Combined with the chemical sterilization of Ag and the oxide of Cu, the bacterial survival rate of CuO_x/Ag/P25 was low (0.006%) compared with the blank sample. This design provides a strategy for developing green dual-functional coating materials with photoelectrochemical anticorrosion and antifouling properties.

Fabrication of ZnO-SnO2 nanocomposite and its photocatalytic activity for enhanced degradation of Biebrich scarlet

The n-n-type ZnO-SnO₂ nanocomposite was fabricated using malic acid following a simple one-pot co-precipitation method. The fabricated ZnO-SnO₂ nanocomposite was employed as a photocatalyst in the degradation of Biebrich scarlet dye under UV₂₅₄ light. TEM, SAED, XRD, XPS, EDX, FTIR, and UV spectra have been recorded to characterize the synthesized ZnO-SnO₂ nanostructures. TEM studies found that the average particle size was 10-12 nm, and the SAED confirmed the polycrystalline nature of the synthesized nanocomposite. It was found that 97% of 10 mg/L Biebrich scarlet dye was degraded by 25 mg/L of photocatalyst within 40-min irradiation of UV₂₅₄ light at an optimum pH of 6. Further studies showed that the degradation followed pseudo-first-order kinetics with a rate constant of 5.48 × 10^-2 min^-1. The fabricated ZnO-SnO₂ nanocomposite was reusable up to 8 times; hence, it proved to be an efficient catalyst for the photodegradation of Biebrich scarlet dye.

Photocatalytic Performance of Carbon-Containing CuMo-Based Catalysts under Sunlight Illumination

Carbon-doped nanostructured CuMo-based photocatalysts were prepared by solvothermal synthesis. Two thermal treatments—oxidative and inert atmosphere—were used for the synthesis of the catalysts, and the influence of spherical carbon structures upon the crystalline phases on the photocatalytic activity and stability was studied. XRD showed the catalysts are nanostructured and composed by a mixture of copper (Cu, Cu2O, and CuO) and molybdenum (MoO2 and MoO3) crystalline phases. The catalysts were used for the degradation of yellow 5 under solar light. A remarkable leaching of Mo both in dark and under solar irradiation was observed and quantified. This phenomenon was responsible for the loss of photocatalytic activity for the degradation of the dye on the Mo-containing series. Conversely, the Cu-based photocatalysts were stable, with no leaching observed after 6 h irradiation and with a higher conversion of yellow 5 compared with the Mo- and CuMo series. The stability of Cu-based catalysts was attributed to a protective effect of spherical carbon structures formed during the solvothermal synthesis. Regarding the catalysts’ composition, sample Cu4-800-N2 prepared by pyrolysis exhibited up to 4.4 times higher photoactivity than that of the pristine material, which is attributed to a combined effect of an enhanced surface area and micropore volume generated during the pyrolytic treatment due to the presence of the carbon component in the catalyst. Scavenger tests have revealed that the mechanism for tartrazine degradation on irradiated Cu-based catalysts involves successive attacks of •OH radicals.

Titanium dioxide and fluoropolymer-based coating for smart fabrics with antimicrobial and water-repellent properties

In the coronavirus disease 2019 pandemic, protective clothing is required for medical staff at risk of infection. This study proposes functional smart fabrics with antimicrobial and water-repellent properties, using titanium dioxide (TiO₂) and fluoropolymer-based precursors as coating materials. Experimental results indicated a uniform distribution of TiO₂ particles with an average size below 200 nm throughout the fabric. A zone of inhibition test revealed that the fabric inhibited bacterial growth, specifically of Staphylococcus aureus and Klebsiella pneumoniae, before and after 10 wash cycles of the fabric. In wetting angle measurements, the contact angles of water droplets on the fabric ranged from 120° to 139°. A water repellency test confirmed that the coated fabrics retained their water-repellent property after 10 wash cycles.

The fabrics coated with TiO₂ photocatalyst and fluoropolymer exhibit good water-repellent and antimicrobial properties. The coated fabrics can be used in the fabrication of smart gowns and scrub suits as protective clothing for medical staff.

Controlled growth of ultrasmall Cu2O clusters on TiO2nanoparticles by atmospheric-pressure atomic layer deposition for enhanced photocatalytic activity

This work presents a gas-phase approach for the synthesis of Cu₂O/TiO₂powder-based photocatalysts using atomic layer deposition (ALD). The process is carried out in a fluidized bed reactor working at atmospheric pressure using (trimethylvinylsilyl)-hexafluoroacetulacetonate copper(I) as the Cu-precursor and H₂O vapor as the oxidizer. The saturating regime of the chemical reactions and the linear growth of ALD are achieved. In combination with the unsaturated regime, the ALD approach enables the deposition of ultrasmall Cu₂O clusters with average diameters in the range of 1.3-2.0 nm, narrow particle size distributions and tunable Cu₂O loadings on P25 TiO₂nanoparticles. The photocatalytic performance of Cu₂O/TiO₂photocatalysts is investigated by the degradation of organic dyes, including Rhodamine B (RhB), methyl orange, and methylene blue; the results demonstrate that the surface modification of TiO₂nanoparticles by Cu₂O nanoclusters significantly enhances the photocatalytic activity of TiO₂. This is attributed to the efficient charge transfer between Cu₂O and TiO₂that reduces the charge recombination. The photocatalytic reaction mechanism is further investigated for the degradation of RhB, revealing the dominating role of holes, which contribute to both direct hole oxidation and indirect oxidation (i.e. via the formation of hydroxyl radicals). Our approach provides a fast, scalable and efficient process to deposit ultrasmall Cu₂O clusters in a controllable fashion for surface engineering and modification.

TiO2 nanoparticles potentiated the cytotoxicity, oxidative stress and apoptosis response of cadmium in two different human cells

Widespread application of titanium dioxide nanoparticles (nTiO₂) and ubiquitous cadmium (Cd) pollution may increase their chance of co-existence in the natural environment. Toxicological information on co-exposure of nTiO₂ and Cd in mammalian models is largely lacking. Hence, we studied the combined effects of nTiO₂ and Cd in human liver (HepG2) and breast cancer (MCF-7) cells. We observed that nTiO₂ did not produce toxicity to HepG2 and MCF-7 cells. However, moderate concentration of Cd exposure caused cytotoxicity to both cells. Interestingly, non-cytotoxic concentration of nTiO₂ effectively enhanced the oxidative stress response of Cd indicated by pro-oxidants generation (reactive oxygen species, hydrogen peroxide, and lipid peroxidation) and antioxidants depletion (glutathione level and glutathione reductase, superoxide dismutase, and catalase enzymes). Moreover, nTiO₂ potentiated the Cd-induced apoptosis in both cells suggested by altered expression of p53, bax, and bcl-2 genes along with low mitochondrial membrane potential. Cellular uptake results demonstrated that nTiO₂ facilitates the internalization of Cd into the cells. Overall, this study demonstrated that non-cytotoxic concentration of nTiO₂ enhanced the toxicological potential of Cd in human cells. Therefore, more attention should be paid on the combine effects of nTiO₂ and Cd on human health.

Novel reduced graphene oxide/ZnBi2O4 hybrid photocatalyst for visible light degradation of 2,4-dichlorophenoxyacetic acid

A new highly efficient rGO/ZnBi₂O₄ hybrid catalyst has been successfully synthesized through oxidation-reduction and co-precipitation methods, followed by heating at 450 °C. The obtained rGO/ZnBi₂O₄ catalyst was characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The catalytic activity of rGO/ZnBi₂O₄ under visible light irradiation was tested using 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution. The rGO/ZnBi₂O₄ hybrid catalyst containing 2% rGO (2.0rGO/ZnBi₂O₄) showed the best catalytic performance. More than 90% of 2,4-D in a 30 mg/L solution was degraded after 120 min of visible light irradiation using 2.0rGO/ZnBi₂O₄ at 1.0 g/L concentration. Moreover, the 2.0rGO/ZnBi₂O₄ catalyst showed excellent stability over four consecutive cycles, with no significant changes in the photocatalytic degradation rate. This study demonstrated that rGO/ZnBi₂O₄ may be a promising, low-cost, and green photocatalyst for environmental remediation applications.

The synthesis of switch-off fluorescent water-stable copper nanocluster Hg2+ sensors via a simple one-pot approach by an in situ metal reduction strategy in the presence of a thiolated polymer ligand template

The fabrication of stable fluorescent copper nanoclusters (CuNCs) in aqueous media is still challenging, despite the low price and potential biomedical applications. Herein, we report a facile and efficient strategy for assembling CuNCs using multifunctional thiolated copolymers with pH and thermoresponsive features. The new nanohybrids are formed via a simple one-pot approach through the reduction of a copper salt with hydrazine in the presence of a multithiolated polymer, which provides a template during nanocluster assembly and further efficient protection against oxidation and aggregation. Furthermore, the thermo- and pH-responsive properties of the pristine copolymers endow the nanohybrids with these stimuli-responsive features. The thiol content and the macromolecular size of the polymer ligands exert strong influences on the final photophysical properties of these new hybrid luminescent nanoclusters. The existence of stable bright greenish-yellow emission in water over long periods of time, the high photostability under UV irradiation and the strong oxidation resistance toward hydrogen peroxide of the hybrid CuNCs suggest that they have great promise for nanomedicine, bioassay and nanosensor use. Furthermore, the polymeric CuNCs obtained have been successfully tested as optical switch-off sensors for the sensitive and highly selective detection of Hg2+ in the presence of other metal ions in liquid and solid states. Finally, we demonstrate the practical application of the new hybrid to Hg2+ detection in human urine.

Mesoporous Cu–Cu2O@TiO2 heterojunction photocatalysts derived from metal–organic frameworks

Cu–Cu₂O@TiO₂ heterojunction photocatalyst derived from a metal–organic framework shows high photocatalytic activity for dye degradation under visible light irradiation.

Dual Cocatalysts in TiO2 Photocatalysis

Semiconductor photocatalysis is recognized as a promising strategy to simultaneously address energy needs and environmental pollution. Titanium dioxide (TiO₂ ) has been investigated for such applications due to its low cost, nontoxicity, and high chemical stability. However, pristine TiO₂ still suffers from low utilization of visible light and high photogenerated-charge-carrier recombination rate. Recently, TiO₂ photocatalysts modified by dual cocatalysts with different functions have attracted much attention due to the extended light absorption, enhanced reactant adsorption, and promoted charge-carrier-separation efficiency granted by various cocatalysts. Recent progress on the component and structural design of dual cocatalysts in TiO₂ photocatalysts is summarized. Depending on their components, dual cocatalysts decorated on TiO₂ photocatalysts can be divided into the following categories: bimetallic cocatalysts, metal-metal oxide/sulfide cocatalysts, metal-graphene cocatalysts, and metal oxide/sulfide-graphene cocatalysts. Depending on their architecture, they can be categorized into randomly deposited binary cocatalysts, facet-dependent selective-deposition binary cocatalysts, and core-shell structural binary cocatalysts. Concluding perspectives on the challenges and opportunities for the further exploration of dual cocatalyst-modified TiO₂ photocatalysts are presented.

Photocatalytic Degradation of 2,4,6-Trichlorophenol by MgO–MgFe2O4 Derived from Layered Double Hydroxide Structures

In recent years, the search for solutions for the treatment of water pollution by toxic compounds such as phenols and chlorophenols has been increasing. Phenols and their derivatives are widely used in the manufacture of pesticides, insecticides, paper, and wood preservers, among other things. Chlorophenols are partially biodegradable but not directly photodegradable by sunlight and are extremely toxic—especially 2,4,6-trichlorophenol, which is considered to be potentially carcinogenic. As a viable proposal to be applied in the treatment of water contaminated with 2,4,6-trichlorophenol, this paper presents an application study of the thermally activated Mg/Fe layered double hydroxides as photocatalysts for the mineralization of this contaminant. Activated Mg/Fe layered double hydroxides were characterized by X-ray diffraction, thermal analysis, N2 physisorption, and scanning electron microscopy with X-ray dispersive energy. The results of the photocatalytic degradation of 2,4,6-trichlorophenol in aqueous solution showed good photocatalytic activity, with an efficiency of degradation of up to 93% and mineralization of 82%; degradation values which are higher than that of TiO2-P25, which only reached 18% degradation. The degradation capacity is attributed to the structure of the MgO–MgFe2O4 oxides derived from double laminate hydroxide Mg/Fe. A path of degradation based on a mechanism of superoxide and hollow radicals is proposed.

Fabrication of a full-spectrum-response Cu2(OH)2CO3/g-C3N4 heterojunction catalyst with outstanding photocatalytic H2O2 production performance via a self-sacrificial method

Over the past few decades, near infrared light (NIR), as an important part of sunlight, has seldom been utilized in photocatalytic reactions.

Photoreduction route for Cu2O/TiO2 nanotubes junction for enhanced photocatalytic activity

Here, we synthesized copper(i) oxide and titanium dioxide nanotubes (TNTs) heterojunctions (HJs) by a photoreduction method using a low-power UV lamp without involving any additional steps, such as chemical reduction, surfactant, or protection agents. Transmission electron microscopy, X-ray diffraction, Raman scattering, X-ray photoelectron spectroscopy, diffuse reflectance spectra, and photoluminescence spectroscopy were carried out to verify the formation of a HJ between the Cu₂O nanoparticles (Cu₂O NPs) and TNTs. The efficiency and the rate of methylene blue photo-degradation over the Cu₂O/TNTs HJ were found to be nearly double and triple compared to the isolated TNTs. The enhanced efficiency is attributed to the narrow band gap and defect states caused by the oxygen vacancies in the vicinity of HJs. Moreover, the type II band alignment of Cu₂O NPs and TNTs naturally separates the photo-generated carriers and constrains the recombination process owing to the internal electric field across the Cu₂O/TNTs interface.

Good photocatalytic performance is demonstrated by Cu₂O NPs directly loaded onto hydrothermally synthesized TiO₂ NTs via photoreduction method conducted with a lower power UV lamp at room temp. This is due to narrowing bandgap and forming an internal electric field.

Photocatalytic pathway toward degradation of environmental pharmaceutical pollutants: structure, kinetics and mechanism approach

During the last few years, the presence of pharmaceuticals in the aquatic environment, classified as so-called emerging contaminants, has attracted attention from the scientific community.

Masking effect of copper oxides photodeposited on titanium dioxide: exploring UV, visible, and solar light activity

UV, visible, and solar light activations gave different optimum loadings of CuO due to the different masking effects of CuO photodeposited on TiO₂.

Selective construction of junctions on different facets of BiVO4 for enhancing photo-activity

The combination of p–n and m–s junctions over BiVO₄ results in an additional effect for improving photo-activity.

Fabrication of a novel ZnO/MMO/CNT nanohybrid derived from multi-cationic layered double hydroxide for photocatalytic degradation of azo dye under visible light

A facile and effective approach for assembling ZnO/MMO/CNT nanohybrid with excellent photodegradation performance under visible light is reported.