A Copper-Selective Sensor and Its Inhibition of Copper-Amyloid Beta Aggregation

Copper is an essential trace metal for biological processes in humans and animals. A low level of copper detection at physiological pH using fluorescent probes is very important for in vitro applications, such as the detection of copper in water or urine, and in vivo applications, such as tracking the dynamic copper concentrations inside cells. Copper homeostasis is disrupted in neurological diseases like Alzheimer's disease, and copper forms aggregates with amyloid beta (Ab42) peptide, resulting in senile plaques in Alzheimer's brains. Therefore, a selective copper detector probe that can detect amyloid beta peptide-copper aggregates and decrease the aggregate size has potential uses in medicine. We have developed a series of Cu2+-selective low fluorescent to high fluorescent tri and tetradentate dentate ligands and conjugated them with a peptide ligand to amyloid-beta binding peptide to increase the solubility of the compounds and make the resultant compounds bind to Cu2+-amyloid aggregates. The copper selective compounds were developed using chemical scaffolds known to have high affinity and selectivity for Cu2+, and their conjugates with peptides were tested for affinity and selectivity towards Cu2+. The test results were used to inform further improvement of the next compound. The final Cu2+ chelator-peptide conjugate we developed showed high selectivity for Cu2+ and high fluorescence properties. The compound bound 1:1 to Cu2+ ion, as determined from its Job's plot. Fluorescence of the ligand could be detected at nanomolar concentrations. The effect of this ligand on controlling Cu2+-Ab42 aggregation was studied using fluorescence assays and microscopy. It was found that the Cu2+-chelator-peptide conjugate efficiently reduced aggregate size and, therefore, acted as an inhibitor of Ab42-Cu2+ aggregation. Since high micromolar concentrations of Cu2+ are present in senile plaques, and Cu2+ accelerates the formation of toxic soluble aggregates of Ab42, which are precursors of insoluble plaques, the developed hybrid molecule can potentially serve as a therapeutic for Alzheimer's disease.

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

Synthesis of Di(thiophen-2-yl) Substituted Pyrene-Pyridine Conjugated Scaffold and DFT Insights: A Selective and Sensitive Colorimetric, and Ratiometric Fluorescent Sensor for Fe(III) Ions

In this context, we used the multicomponent Chichibabin pyridine synthesis reaction to synthesize a novel di(thiophen-2-yl) substituted and pyrene-pyridine fluorescent molecular hybrid. The computational (DFT and TD-DFT) and experimental investigations were performed to understand the photophysical properties of the synthesized new structural scaffold. The synthesized ligand displays highly selective fluorescent sensing properties towards Fe3+ ions when compared to other competitive metal ions (Al3+, Ba2+, Ca2+, Cd2+, Co2+, Cr3+, Cu2+, Fe2+, Hg2+, Na+, Ni2+, Pb2+, Sr2+, Sn2+ and Zn2+). The photophysical properties studies reveal that the synthesized hybrid molecule has a binding constant of 2.30 × 103 M-1 with limit of detection (LOD) of 4.56 × 10-5 M (absorbance mode) and 5.84 × 10-5 M (emission mode) for Fe3+ ions. We believe that the synthesized pyrene-conjugated hybrid ligand can serve as a potential fluorescent chemosensor for the selective and specific detection of Fe3+ ions.

AIEE activated Pyrene-Dansyl coupled FRET probe for discriminating detection of lethal Cu2+ and CN-: Bio-Imaging, DNA binding studies and prompt prognosis of Menke's disease

In present work a pyrene-dansyl dyad functionalized chemoreceptor, DPNS is unveiled towards ultrasensitive chromo-fluorogenic detection of heavy and transition metal ions (HTMs) like Cu2+ and pernicious CN-. It demonstrated distinct chromogenic responses; colorless to faint yellow (Cu2+), intense yellow (CN-) from contaminant aqueous sources. Cu2+ instigated alteration in DPNS fluorescence from feeble emission to sparkling green with LOD: 37.75 × 10-9 M, cyan emission for CN- having LOD 61.51 × 10-8M. In particular, chemical scaffold of DPNS consists of -C = N, O = S = O donor entitities that escalates overall polarity thereby providing an excellent binding pocket for simultaneous Cu2+ and CN- recognition with distinct photophysical signaling. Impressively, presence of two fluorophoric moieties triggers FRET, CHEF phenomenon. The conceivable host:guest interactive pathway is manifested by LMCT- FRET-PET-CHEF, C = N isomerization for Cu2+ and ICT-H-bonding for CN-. An exquisite experimental and theoretical corroboration further strengthened the recognition phenomenon. In addition owing to pyrene excimer formation, DPNS exhibits AIEE with increasing water fraction. Notably, DPNS could successfully undergo intracellular tracking of Cu2+ in Tecoma Stans, Peperomia Pellucida. DPNS•••Cu2+ adduct displayed significant intercalative DNA binding activity rationalized by spectral investigation, competitive EB binding, viscosity study. The overall findings, excellent properties endows DPNS a potential contender towards discriminative detection of Cu2+ and CN- like toxic industrial contaminants.

Citrate Functionalized Zirconium-Based Metal Organic Framework for the Fluorescent Detection of Ciprofloxacin in Aqueous Media

Ciprofloxacin (CIP) is a commonly used antibiotic for the treatment of infectious diseases in humans and as a prophylactic agent in the livestock industry, leading to the environmental discharge of significant amounts of CIP. CIP is stable in aquatic systems leading to its pseudo-persistence. Constant exposure to these antibiotics results in the generation of antibiotic-resistant pathogens and potential toxicity/hypersensitivity in humans. Therefore, it is necessary to develop a convenient, rapid, and cost-effective method for the monitoring of ciprofloxacin in environmental samples. Rhodamine-based fluorescent receptors have the limitation of aqueous solubility. Therefore, in order to overcome this drawback, we designed a novel fluorescent receptor based on a zirconium-based metal organic framework (MOF-808). The precursor, MOF-808, was synthesized and functionalized by using sodium citrate to obtain a receptor called C-MOF-808. The C-MOF-808 was structurally characterized by XRD and spectroscopic analyses. Thus, this synthesized receptor can be used for the fluorescent detection of CIP in aqueous media with a detection limit of 9.4 µM. The detection phenomena of the receptor were studied by absorption as well as fluorescent spectra. The binding behavior of CIP with the receptor was studied by FT-IR and ¹H-NMR analyses, and a binding mechanism is proposed.

Design of a dual responsive receptor with oxochromane hydrazide moiety to monitor toxic Hg2+ and Cd2+ ions: Usage on real samples and live cells

In this work, we report a facile receptor OMB [N',N"'-(3-((4-oxochroman-3-yl)methylene)pentane-2,4- diylidene)bis(4-methoxybenzohydrazide)] for the simultaneous detection of toxic analytes (Hg²⁺ and Cd²⁺ ions) in environment and biological samples. The receptor OMB exhibits an excellent selectivity and sensitivity which was determined using absorption and emission spectra. The receptor OMB shows rapid detection with lowest LOD (0.62 nM for Hg²⁺ ions and 0.77 nM for Cd²⁺ ions) and LOQ (2.08 nM for Hg²⁺ ions and 2.57 nM for Cd²⁺ ions) values. In addition, the receptor OMB exhibits 1:1 binding stoichiometry towards Hg²⁺ and Cd²⁺ ions with binding constant values of 5.5 × 10⁶ M^-1 and 4.6 × 10⁶ M^-1. Moreover, the synthesized receptor OMB possess ability to detect these analytes (Hg²⁺ and Cd²⁺ ions) in realistic samples (food and water) which was recognized using photoluminescence spectroscopy technique. In addition, the receptor OMB is also utilized to detect both the analytes in live HeLa cells. Thus, the overall results indicate that the receptor OMB was more suitable to detect the toxic analytes (Hg²⁺ and Cd²⁺ ions) present in the environment.

Fluorescence "Turn-Off" and Colorimetric Sensor for Fe2+, Fe3+, and Cu2+ Ions Based on a 2,5,7-Triarylimidazopyridine Scaffold

Two cyanoimidazopyridine-based sensors (SS1 and SS2) were explored for the colorimetric and fluorometric detection of Fe²⁺, Fe³⁺, and Cu²⁺ ions in the semi-aqueous medium. The "turn-off" fluorescence response of both sensors to these ions was due to the restriction in internal charge transfer. Job's plot and semi-empirical calculations revealed that SS1 and SS2 complexed with Cu²⁺ ions in a 1:1 ratio and Fe^2+/3+ ions in a 2:1 ratio, respectively. The sensors were found to have high binding constant (K _a) values and low detection limit values. FMO analysis using the semi-empirical quantum mechanics method revealed the decrease in energy gap after complexation with metal ions. Sensor-coated filter paper strips were prepared and analyzed, where the color changes in the strips could be utilized for the real-time detection of Fe²⁺, Fe³⁺, and Cu²⁺ ions.

Solvent-free synthesis of nitrone-containing template as a chemosensor for selective detection of Cu(II) in water

A state-of-the-art method was developed for repurposing nitrone-containing compounds in the chemosensory field, the ability of the designed molecules to chelate metal cations was evaluated, and their unprecedented solubility in water was confirmed. A facile, rapid, and solvent-free method of synthesizing small molecular mass chemosensors was developed by using a modulative α-aryl-N-aryl nitrone template. α-(Z)-Imidazol-4-ylmethylen-N-phenyl nitrone (Nit1) and α-(Z)-2-pyridyl-N-phenyl nitrone (Nit2) were prepared in 15 min, isolated in less than 60 min with ca. 90% yield, and screened against nine metal cations. Nit1 is a small-molecular-mass compound (188 g mol^-1) that is water-soluble and has specificity for sensing Cu²⁺ with an association constant of K = 1.53 × 10¹⁰ and a limit of detection (LOD) of 0.06 ppm. These properties make Nit1 a competitive chemosensor for the detection of Cu²⁺ in aqueous solution. The nitrone-containing template used in this study is a step forward for new and small chemosensory entities.

Interaction of 9-Methoxyluminarine with Different G-Quadruplex Topologies: Fluorescence and Circular Dichroism Studies

The interactions of G-quadruplexes of different topologies with highly fluorescent 9-methoxyluminarine ligand 9-MeLM were investigated by fluorescence and circular dichroism spectroscopy. The results showed that 9-methoxyluminarine was able to interact and did not destabilize any investigated molecular targets. The studied compound was selectively quenched by parallel c-MYC G-quadruplex DNA, whereas hybrid and antiparallel G4 topology caused only a negligible decrease in the fluorescence of the ligand. A high decrease of fluorescence of the ligand after binding with c-MYC G-quadruplex suggests that this molecule can be used as a selective probe for parallel G-quadruplexes.

Selective anions mediated fluorescence "turn-on", aggregation induced emission (AIE) and lysozyme targeting properties of pyrene-naphthalene sulphonyl conjugate

We have designed and synthesized a novel pyrene-naphthalene sulphonyl conjugate, 1-((1Z)-(4-((Z)-4-(pyrene-1-yl)methyleneamino)phenylsulfonyl)phenylimino)methyl)naphthalene-2-ol (PSN) through a facile two-step reactions. It was characterized by various spectral techniques. Fluorescence spectral studies showed that compound PSN featured fluorescence enhancement upon increasing the water content in THF. This can be attributed to the phenomena of aggregated induced emission (AIE), which is confirmed by SEM and AFM studies, due to the restriction of CHN isomerization of PSN. The anion sensing of PSN was examined with various anions. Among these anions, H₂PO₄^- and F^- ions were selectively sensing with a low detection limit of 3.52 × 10^-7 M and 7.23 × 10^-7 M, respectively, and an obvious color change from yellow to orange was observed by the naked eye. The mechanism of sensing involved the formation of hydrogen bonding interaction between O-H group of PSN and H₂PO₄^-/ F^- ions. The binding of PSN with LYZ was also examined by docking studies, which shows that H-bonding and hydrophobic interactions play crucial roles for the interaction of LYZ toward PSN.

A novel fluorescent BODIPY-based probe for detection of Cu2+ and H2S based on displacement approach

A new BODIPY-based fluorescent probe (BC-DPA) was prepared by a simple method for Cu²⁺ detection in aqueous media and living cells. BC-DPA displayed excellent selectivity toward Cu²⁺via fluorescence "turn-off" mode when a mononuclear Cu(Ⅱ) complex is formed. The corresponding BC-DPA-Cu(Ⅱ) complex, whose structure was characterized by X-ray crystallography, has Cu(Ⅱ) in a distorted octahedral geometry. On the basis of the displacement approach, the fluorescence of BC-DPA-Cu²⁺ was recovered in the presence of S^2-, which allowed the system to act as a sensitive "turn-on" sensor for hydrogen sulfide. Furthermore, BC-DPA exhibited noticeable permeability and low cytotoxicity, making it a useful tool to detect Cu²⁺ in biosystems.

Exploratory studies on azido-bridged complexes (Ni2+ and Mn2+) as dual colourimetric chemosensors for S2- and Ag+: combined experimental and theoretical outcomes with real field applications

We report two isostructural dinuclear transition metal complexes [M2(HL)2(N3)4], where M = Ni2+ (BS-1), Mn2+ (BS-2), and HL is (2-methyl-2-((pyridin-2-ylmethyl)amino)propan-1-ol) and investigate them as molecular sensors towards hazardous entities. BS-1 shows high selectivity towards the S2- and Ag+ ions, easily observed by the naked eye colour change and its detection limit in aqueous solutions for the S2- ion was calculated as 0.55 μM with a binding constant of 3.28 × 105 M-1, while the limit for the Ag+ ion is 21.8 μM. Notably, BS-2 shows good selectivity towards the Ag+ ion with a detection limit of 10.84 μM. Spectroscopic and DFT studies shed light on the mechanistic course of interaction between the host and guest entities, suggesting a sulphide-mediated reduction of the azide mechanism. In a nutshell, these simple transition metal complexes were exploited for discriminately detecting hazardous analytes with real field applications in analytical science (via. "Dip-Stick" approach) as well as engineering science, which provides a significant contribution in the recent advancement of supramolecular chemistry.

A hydrophilic naphthalimide-based fluorescence chemosensor forCu2+ ion: Sensing properties, cell imaging and molecular logic behavior

In this work, a hydrophilic naphthalimide-based fluorescence chemosensor (sensor 1) was synthesized for Cu²⁺ recognition, in which 2-(2-aminoethoxy)ethanol was introduced to improve the hydrophily and Schiff base acted as the multidentate ligand for Cu²⁺. The effect factors, sensing mechanism and regenerability of sensor 1 for Cu²⁺ sensing were systematically investigated. It was found that sensor 1 displayed a long emission wavelength of 532 nm upon excited in visible light region (436 nm), and the good water solubility made it utilized in aqueous media. It could selectively react with Cu²⁺ over other common metal ions to form a 2:1 complex within 1 min and result in significant fluorescence quench. The fluorescence change was linear to 0.5-10.0 μmol L^-1 of Cu²⁺ with a low detection limit of 3.74 × 10^-8 mol L^-1. Sensor 1 has been successfully utilized for analyzing Cu²⁺ in water samples as well as imaging cellular Cu²⁺. Moreover, in view of fluorescence "on-off-on" switches of sensor 1 induced by Cu²⁺ and EDTA, an IMPLICATION logic gate was constructed based on fluorescence mode with Cu²⁺ and EDTA as inputs.

Binding of Fe(ii)-complex of phenanthroline appended glycoconjugate with DNA, plasmid and an agglutinin protein

A phenanthroline appended glycoconjugate and its Fe(ii) complex have been synthesized and characterized thoroughly. The Fe-complex interacts with DNA and WGA protein and alter their structures as studied by spectroscopy and microscopy.

A novel fluoro-chromogenic Cu2+ probe for living-cell imaging based on rhodamine 6G-pyridine conjugation

A novel fluoro-chromogenic rhodamine spirolactam probe (RP) has been prepared through the condensation of rhodamine hydrazine and 2-acetylpyridine, which displayed the detection of Cu²⁺ with high selectivity over a large number of other common metal ions. It shows a "turn-on" response to paramagnetic Cu²⁺ with an about 12-fold enhancement, and a color change from colorless to red that is observable by the naked eye. These changes are ascribed to the ring-opening of the spirolactam in RP, and subsequent host-guest coordination. The 2:1 binding stoichiometry of RP to Cu²⁺ was confirmed by Job's and B-H plots. The resulting fluorescence enhancement can be used to detect Cu²⁺ at concentrations from 2.0 to 20.0 μM with a limit of detection of 0.21 μM, which was lower than the maximum allowable Cu²⁺ level set by the WHO. Finally, RP has been utilized to monitor Cu²⁺ in living cells and natural water. Graphical abstract.

A coumarin-based fluorescent probe for specific and rapid detection of fluoride ions

A simple and coumarin-based fluorescence probe has been designed and synthesized with silyl group as recognition group of fluoride ions (F−) in this study. The results showed that the fluorescence intensity of the probe displayed prominent enhancement with addition of F− at 445 nm with incubation of 1 min. There was an excellent linear relationship between fluorescence intensity and fluoride concentration from 0 to 30 μM (0~0.57 ppm), which offered the important condition for the quantitative analysis. In addition, the highly selective response to fluorion, the low detection limit with 28 nM (0.532 ppb), low toxicity and bioimaging afforded an advantage for practical application and detecting fluoride in biological systerms.

Reversible turn-on fluorescent Cu(ii) sensors: rather dream than reality?

Reversible turn-on fluorescent Cu(ii) sensors are of high interest to understand copper metabolism in biology and medicine. However, they are intrinsically difficult to build, and careful studies are needed to exclude Cu(ii)-induced sensor oxidation.

A simple urea-based multianalyte and multichannel chemosensor for the selective detection of F−, Hg2+ and Cu2+ in solution and cells and the extraction of Hg2+ and Cu2+ from real water sources: a logic gate mimic ensemble

Herein, a hydrazine-based chromogenic, fluorogenic and electrochemical chemosensor BCC [1,5-bis(4-cyanophenyl) carbonohydrazide] was reported.

A fluorescent and colorimetric probe based on naphthalene diimide and its high sensitivity towards copper ions when used as test strips

Herein, a red fluorescent and colorimetric probe (NDI-Py) based on naphthalene diimide was designed and synthesized, which exhibited rapid response, high sensitivity and selectivity towards copper ions, and the detection limit was as low as 0.97 μM in solution. Furthermore, NDI-Py demonstrated a strong red emission in the aggregated state because of its non-planar structure. Thus, it can act as a test strip to conveniently monitor copper ions with the detection limit as low as 2.0 μM.

A red fluorescent and colorimetric probe (NDI-Py) exhibited high selectivity and sensitivity towards copper ions both in solution and on silica gel plates.

Selective and sensitive detection of cysteine in water and live cells using a coumarin–Cu2+ fluorescent ensemble

A coumarin–Cu²⁺ ensemble based fluorescent chemosensor was developed for the selective detection of cysteine in aqueous media and live cells.

Colorimetric and fluorescent chemosensor for highly selective and sensitive relay detection of Cu2+ and H2PO4- in aqueous media

In this manuscript, a new colorimetric and fluorescent chemosensor (T) was designed and synthesized, it could successively detect Cu²⁺ and H₂PO₄^- in DMSO/H₂O (v/v=9:1, pH=7.2) buffer solution with high selectivity and sensitivity. When added Cu²⁺ ions into the solution of T, it showed a color changes from yellow to colorless, meanwhile, the green fluorescence of sensor T quenched. This recognition behavior was not affected in the presence of other cations, including Hg²⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺, and Mg²⁺ ions. More interestingly, the Cu²⁺ ions contain sensor T solution could recover the color and fluorescence upon the addition of H₂PO₄^- anions in the same medium. And other surveyed anions (including F^-, Cl^-, Br^-, I^-, AcO^-, HSO₄^-, ClO₄^-, CN^- and SCN^-) had nearly no influence on the recognition behavior. The detection limits of T to Cu²⁺ and T-Cu²⁺ to H₂PO₄^- were evaluated to be 1.609×10^-8M and 0.994×10^-7M, respectively. In addition, the sensor T also could be served as a recyclable component and the logic gate output was also defined in sensing materials. The test strips based on sensor T were fabricated, which acted as a convenient and efficient Cu²⁺ and H₂PO₄^- test kits.

Live cell imaging of bacterial cells: Pyrenoylpyrrole-based fluorescence labeling

A novel substituted pyrenoylpyrroles was synthesized by the reaction of pyrenoyl chalcone, TosMIC and methyl iodide under mild condition. All the synthesized compounds were screened for their bioactivity, and the MIC was determined, among which few compounds showed moderate antibacterial activity toward Gram-positive as well as Gram-negative bacteria. Further, cytotoxicity assay ascertained that these compounds were non-toxic to mammalian cells as well. The pyrene chromophore in the synthesized compounds (3a-e) and (5a-e) is responsible for the good photophysical properties which have an absorbance at λ 340 nm and emission at λ 410 nm. Hence, two of the selected novel synthesized compounds with non-cytotoxic nature prospected for bio-imaging of bacterial cells using high-content screening analysis show that the molecule is suitable for microbial imaging in pathological diagnostic studies.

A highly sensitive and fast responsive naphthalimide-based fluorescent probe for Cu2+ and its application

The response of the probe L to Cu²⁺ is reversible and very fast (20 s). L has a low detection limit of 49 nM and was used for imaging of Cu²⁺ in MCF-7 cells with satisfying results. The sensor L can be analyzed with a molecular logic gate.

Single fluorescent chemosensor for multiple targets: sequential detection of Al3+ and pyrophosphate and selective detection of F− in near-perfect aqueous solution

An easily fabricated chemosensor was developed for selective fluorescence detection of three analytes, Al³⁺, pyrophosphate (PPi), and F⁻, in aqueous solution.

Selective chromo-fluorogenic molecular sensor for dual channel recognition of Cu2+and F−: effect of functional group on selectivity

The amido-Schiff base (3-hydroxy-naphthalene-2-carboxylic acid(4-cyano-benzylidene)-hydrazide) shows dual mode sensibility towards Cu²⁺and F⁻. It can detect Cu²⁺in HEK 293 cells and F⁻in tooth paste and in solid state.

Dual mode selective chemosensor for copper and fluoride ions: a fluorometric, colorimetric and theoretical investigation

Sensor1can detect both copper and fluoride ions selectively in dual sensing mode. Moreover, it has been found to exhibit good membrane permeability for the detection of Cu²⁺in HEK 293 cells.