Injectable alginate-based zwitterionic hydrogels promoting endometrial repair and restoring fertility

The development of novel therapeutic approaches to facilitate endometrial repair and regeneration while preventing adhesion recurrence is a crucial research objective aimed at enhancing clinical outcomes for women with intrauterine adhesions (IUA). In this study, we introduced an injectable Alg-GMA/PTSB zwitterionic hydrogel, characterized by excellent biocompatibility, anti-protein adsorption properties, and biodegradability. In a rat model, the hydrogel significantly promoted the regeneration and angiogenesis of damaged endometrial tissue, leading to improved recovery of epithelial cells, glands, proliferation, and vascularization. Furthermore, it exhibited the ability to suppress cellular apoptosis and collagen deposition, thereby mitigating fibrosis. Additionally, the hydrogel restored the expression of estrogen/progesterone receptors and endometrial receptivity markers, contributing to enhanced embryo implantation and fertility. These findings underscore the potential of the hydrogel as a promising therapeutic strategy for addressing endometrial injury, reducing fibrosis, restoring fertility, and ultimately improving outcomes for women with IUA.

Click Chemistry: Reaction Rates and Their Suitability for Biomedical Applications

Click chemistry has become a commonly used synthetic method due to the simplicity, efficiency, and high selectivity of this class of chemical reactions. Since their initial discovery, further click chemistry methods have been identified and added to the toolbox of click chemistry reactions for biomedical applications. However, selecting the most suitable reaction for a specific application is often challenging, as multiple factors must be considered, including selectivity, reactivity, biocompatibility, and stability. Thus, this review provides an overview of the benefits and limitations of well-established click chemistry reactions with a particular focus on the importance of considering reaction rates, an often overlooked criterion with little available guidance. The importance of understanding each click chemistry reaction beyond simply the reaction speed is discussed comprehensively with reference to recent biomedical research which utilized click chemistry. This review aims to provide a practical resource for researchers to guide the selection of click chemistry classes for different biomedical applications.

Thermal-responsive β-cyclodextrin-based magnetic hydrogel as a de novo nanomedicine for chemo/hyperthermia treatment of cancerous cells

A novel thermal-responsive β-cyclodextrin-based magnetic hydrogel [β-cyclodextrin-graft-poly(N-isopropylacrylamide)/Fe3O4 (β-CD-g-PNIPAAm/Fe3O4)] was fabricated as a novel nanomedicine for chemo/hyperthermia treatment of cancer cells. Firstly, β-CD was modified by maleic anhydride (MA) followed by copolymerization with NIPAAm monomer and thiol-end capped Fe3O4 nanoparticles (NPs) in the presence of a crosslinker through acrylamide-thiol polymerization system to afford a magnetic hydrogel. The saturation magnetization (δ s) value for developed hydrogel was determined to be 8.2 emu g-1. The hydrogel was physically loaded with an anticancer agent, doxorubicin hydrochloride (Dox). The encapsulation efficiency (EE) of drug into the hydrogel was obtained as 73 %. The system represented acceptable thermal-triggered drug release behavior that best fitted with Higuchi model, demonstrating the release of drug is mostly controlled by diffusion mechanism. The anticancer performance of the β-CD-g-PNIPAAm/Fe3O4-Dox was evaluated using MCF7 cells by MTT-assay. In addition, flow cytometry analyses showed considerable cellular uptake of Dox in the cells treated with β-CD-g-PNIPAAm/Fe3O4-Dox (∼70 %) compared to free Dox (∼28 %). As results, in time period of 48 h by combination of chemo- and hyperthermia-therapies, the developed system displayed greater anticancer efficiency than the free Dox.

Thiol-Ene Click Reaction in Constructing Liquid Separation Membranes for Water Treatment

In the evolving landscape of water treatment, membrane technology has ascended to an instrumental role, underscored by its unmatched efficacy and ubiquity. Diverse synthesis and modification techniques are employed to fabricate state-of-the-art liquid separation membranes. Click reactions, distinguished by their rapid kinetics, minimal byproduct generation, and simple reaction condition, emerge as a potent paradigm for devising eco-functional materials. While the metal-free thiol-ene click reaction is acknowledged as a viable approach for membrane material innovation, a systematic elucidation of its applicability in liquid separation membrane development remains conspicuously absent. This review elucidates the pre-functionalization strategies of substrate materials tailored for thiol-ene reactions, notably highlighting thiolation and introducing unsaturated moieties. The consequential implications of thiol-ene reactions on membrane properties-including trade-off effect, surface wettability, and antifouling property-are discussed. The application of thiol-ene reaction in fabricating various liquid separation membranes for different water treatment processes, including wastewater treatment, oil/water separation, and ion separation, are reviewed. Finally, the prospects of thiol-ene reaction in designing novel liquid separation membrane, including pre-functionalization, products prediction, and solute-solute separation membrane, are proposed. This review endeavors to furnish invaluable insights, paving the way for expanding the horizons of thiol-ene reaction application in liquid separation membrane fabrication.

Iterative click reactions using trivalent platforms for sequential molecular assembly

A facile synthesis of multi(triazole)s by iterative click reactions is disclosed. Good functional group tolerance of sequential click assembly by sulfur-fluoride exchange (SuFEx), copper-catalyzed azide-alkyne cycloaddition (CuAAC), and thia-Michael reaction realizes the iterative click reactions. Diverse multi(triazole)-type mid-molecules can be synthesized easily from readily available modules through good chemoselective reactions without functional group transformation steps.

Fluorination Modification of Methyl Vinyl Silicone Rubber and Its Compatibilization Effect on Fluorine/Silicone Rubber Composites

Among numerous rubbers, high-performance rubber composites can be obtained by mixing fluororubber (FKM) with excellent oil resistance and silicone rubber (SiR) with excellent low-temperature resistance. While the difference in polarity between these two kinds of rubbers leads to a reduction in the properties of the composites. To solve the compatibility problem between the two-phase interfaces in FKM/SiR composites, in this research, fluorinated silicone rubbers (MVQ-g-PFDT) of methyl vinyl silicone rubber (MVQ) grafted with 1H,1H,2H,2H-perfluorodecanethiol (PFDT) were prepared via a facile and efficient thiol-ene click reaction, which was then added into FKM/SiR composites. The results showed that the fluorine-containing side chains could effectively inhibit the low-temperature crystallization phenomenon of silicone rubber and further broaden its application ranges in low-temperature environments. The properties of FKM/SiR composites with the addition of MVQ-g-PFDT were significantly improved, with the highest tensile strength of 14.1 MPa and the lowest mass change rate of 6.71% after 48h immersion at 200 °C in IRM903 oil. Additionally, the hydroxyl groups between the fluorine-containing side chains of MVQ-g-PFDT and the surface of silica facilitate the enhancement of the uniform dispersion of fillers. Atomic force microscopy (AFM) characterization results showed a distinct enhancement of the compatibility between the two phases of FKM and SiR. This work would provide further insight into efforts to improve compatibility between rubbers with widely different polarities.

Optimization of the Thermally Conductive Low-k Polymer Dielectrics Based on Multisource Free-Volume Effects

Polymers/polymer matrix composites possessing low dielectric constants (low-k polymer dielectrics) contribute to the advance of electronics, for instance, microprocessor chips, mobile phone antennas, and data communication terminals. However, the intrinsic long-chain structural characteristic results in poor thermal conductivities, which draw heat accumulation and undermine the outstanding low-k performance of polymers. Herein, multisource free-volume effects that combine two novel kinds of extra free volume with the known in-cage free volume of polyhedral oligomeric silsesquioxanes (POSSs) are discussed to reduce the capacity for dielectric constant reduction. The multisource free-volume effects of POSSs are associated with the thermal conductive network formed by the hexagonal boron nitride (BN) in the polymer matrix. The results show a decent balance between low-k performance (dielectric constant is 2.08 at 1 MHz and 1.98 at 10 GHz) and thermal conductivity (0.555 W m-1 K-1, 4.91 times the matrix). The results provide a new idea to maximize the free-volume effects of POSSs to optimize dielectric properties together with other desired performances for the dielectrics.

Bottom-Up Synthesized Glucan Materials: Opportunities from Applied Biocatalysis

Linear d-glucans are natural polysaccharides of simple chemical structure. They are comprised of d-glucosyl units linked by a single type of glycosidic bond. Noncovalent interactions within, and between, the d-glucan chains give rise to a broad variety of macromolecular nanostructures that can assemble into crystalline-organized materials of tunable morphology. Structure design and functionalization of d-glucans for diverse material applications largely relies on top-down processing and chemical derivatization of naturally derived starting materials. The top-down approach encounters critical limitations in efficiency, selectivity, and flexibility. Bottom-up approaches of d-glucan synthesis offer different, and often more precise, ways of polymer structure control and provide means of functional diversification widely inaccessible to top-down routes of polysaccharide material processing. Here the natural and engineered enzymes (glycosyltransferases, glycoside hydrolases and phosphorylases, glycosynthases) for d-glucan polymerization are described and the use of applied biocatalysis for the bottom-up assembly of specific d-glucan structures is shown. Advanced material applications of the resulting polymeric products are further shown and their important role in the development of sustainable macromolecular materials in a bio-based circular economy is discussed.

A thiol-ene mediated approach for peptide bioconjugation using 'green' solvents under continuous flow

Flow chemistry has emerged as an integral process within the chemical sector permitting energy efficient synthetic scale-up while improving safety and minimising solvent usage. Herein, we report the first applications of the photoactivated, radical-mediated thiol-ene reaction for peptide bioconjugation under continuous flow. Bioconjugation reactions employing deep eutectic solvents, bio-based solvents and fully aqueous systems are reported here for a range of biologically relevant peptide substrates. The use of a water soluble photoinitiator, Irgacure 2959, permitted synthesis of glycosylated peptides in fully aqueous conditions, obviating the need for addition of organic solvents and enhancing the green credentials of these rapid, photoactivated, bioconjugation reactions.

A facile method to fabricate versatile keratin cryogels for tissue engineering applications

Human hair keratin (HHK) has been extensively explored as a biomaterial for soft tissue regeneration due to their excellent bioactivity and biocompatibility. The possibility to fabricate HHK into three-dimensional (3D) hydrogels with physical properties resembling soft tissues has been well demonstrated. However, conventional keratin hydrogels often exhibit a dense architecture that could hinder cell filtration. In the present study, HHK-based cryogels were fabricated using a freeze-thaw (FT) method, where oxidized dopamine (ODA) was employed to covalently crosslink thiol/amine rich-keratin molecules at sub-zero temperatures. The obtained HHK-ODA cryogels have micron-sized pores ranging between 100 and 200 μm and mechanical properties that can be tuned by varying the crosslinking density between ODA and HHK. Through optimization of the weight content of ODA and the number of FT cycles, the compressive strengths and stiffnesses of these cryogels achieved 15-fold increments from ∼1.5 kPa to ∼22 kPa and ∼300 Pa to ∼5000 Pa, respectively. The HHK-ODA cryogels competently supported human dermal fibroblast spreading and proliferation. Overall, this study exhibited a facile method to fabricate mechanically superior keratin-based cryogels with cell compatible microarchitecture, circumventing the need for complicated chemical modifications and the use of cytotoxic crosslinkers.

Dithiophosphoric Acids for Polymer Functionalization

Dithiophosphoric acids (DTPAs) are an intriguing class of compounds that are sourced from elemental sulfur and white phosphorus and are prepared from the reaction of phosphorus pentasulfide with alcohols. The electrophilic addition of DTPAs to alkenes and unsaturated olefinic substrates is a known reaction, but has not been applied to polymer synthesis and polymer functionalization. We report on the synthesis and application of DTPAs for the functionalization of challenging poly-enes, namely polyisoprene (PI) and polynorbornene (pNB) prepared by ring-opening metathesis polymerization (ROMP). The high heteroatom content within DTPA moieties impart intriguing bulk properties to poly-ene materials after direct electrophilic addition reactions to the polymer backbone introducing DTPAs as side chain groups. The resulting materials possess both enhanced optical and flame retardant properties vs the poly-ene starting materials. Finally, we demonstrate the ability to prepare crosslinked polydiene films with di-functional DTPAs, where the crosslinking density and thermomechanical properties can be directly tuned by DTPA feed ratios.

Xylose- and Nucleoside-Based Polymers via Thiol-ene Polymerization toward Sugar-Derived Solid Polymer Electrolytes

A series of copolymers have been prepared via thiol-ene polymerization of bioderived α,ω-unsaturated diene monomers with dithiols toward application as solid polymer electrolytes (SPEs) for Li+-ion conduction. Amorphous polyesters and polyethers with low Tg's (-31 to -11 °C) were first prepared from xylose-based monomers (with varying lengths of fatty acid moiety) and 2,2'-(ethylenedioxy)diethanethiol (EDT). Cross-linking by incorporation of a trifunctional monomer also produced a series of SPEs with ionic conductivities up to 2.2 × 10-5 S cm-1 at 60 °C and electrochemical stability up to 5.08 V, a significant improvement over previous xylose-derived materials. Furthermore, a series of copolymers bearing nucleoside moieties were prepared to exploit the complementary base-pairing interaction of nucleobases. Flexible, transparent, and reprocessable SPE films were thus prepared with improved ionic conductivity (up to 1.5 × 10-4 S cm-1 at 60 °C), hydrolytic degradability, and potential self-healing capabilities.

Click Chemistry in Lithium-Metal Batteries

Lithium-metal batteries (LMBs) are considered the "holy grail" of the next-generation energy storage systems, and solid-state electrolytes (SSEs) are a kind of critical component assembled in LMBs. However, as one of the most important branches of SSEs, polymer-based electrolytes (PEs) possess several native drawbacks including insufficient ionic conductivity and so on. Click chemistry is a simple, efficient, regioselective, and stereoselective synthesis method, which can be used not only for preparing PEs with outstanding physical and chemical performances, but also for optimizing the stability of solid electrolyte interphase (SEI) layer and elevate the cycling properties of LMBs effectively. Here it is primarily focused on evaluating the merits of click chemistry, summarizing its existing challenges and outlining its increasing role for the designing and fabrication of advanced PEs. The fundamental requirements for reconstructing artificial SEI layer through click chemistry are also summarized, with the aim to offer a thorough comprehension and provide a strategic guidance for exploring the potentials of click chemistry in the field of LMBs.

A Polyolefin Elastomer Encapsulant Modified by an Ethylene-Propylene-Diene Terpolymer for Photovoltaic Applications

In this study, a newly designed adhesion promoter, a modified ethylene-propylene-diene terpolymer (m-EPDM), was constructed via a simple thiol-ene click reaction between the ethylene-propylene-diene terpolymer (EPDM) and 3-mercaptopropyltrimethoxysilane (MPTS) to employ polyolefin elastomer (POE) encapsulants in photovoltaic modules. The grafting reaction of MPTS on an EPDM backbone (thiol-ene click reaction) was verified using 1H NMR, 29Si NMR, and SEM/EDX. The thermal and mechanical characteristics of the POE compounds did not significantly change with an increasing m-EPDM content irrespective of the cross-linking state. Interestingly, the adhesion strength to the glass substrate increased linearly with an increasing m-EPDM content until 9 phr. Also, the POE compounds containing more than 12 phr m-EPDM showed cohesion failure of the encapsulant layer, remaining as a residue of the encapsulant layer on the glass surface after peel testing. The damp-heat test was conducted to evaluate the long-term durability of the photovoltaic module encapsulated with m-EPDM, and no significant power loss was found even after 1000 h under the test conditions.

Direct conversion of carboxylic acids to free thiols via radical relay acridine photocatalysis enabled by N-O bond cleavage

Carboxylic acids and thiols are basic chemical compounds with diverse utility and widespread reactivity. However, the direct conversion of unprotected acids to thiols is hampered due to a fundamental problem - free thiols are incompatible with the alkyl radicals formed on decarboxylation of carboxylic acids. Herein, we describe a concept for the direct photocatalytic thiolation of unprotected acids allowing unprotected thiols and their derivatives to be obtained. The method is based on the application of a thionocarbonate reagent featuring the N-O bond. The reagent serves both for the rapid trapping of alkyl radicals and for the facile regeneration of the acridine-type photocatalyst.

A Versatile Platform to Generate Shell-Cross-Linked Uniform Π-Conjugated Nanofibers with Controllable Length, High Morphological Stability, and Facile Surface Tailorability

Living crystallization-driven self-assembly (CDSA) has emerged as an efficient route to generate π-conjugated-polymer-based nanofibers (CPNFs) with promising applications from photocatalysis to biomedicine. However, the lack of efficient tools to endow CPNFs with morphological stability and surface tailorability becomes a frustrating hindrance for expanding application spectrum of CPNFs. Herein, a facile strategy to fabricate length-controllable OPV-based (OPV = oligo(p-phenylenevinylene)) CPNFs containing a cross-linked shell with high morphological stability and facile surface tailorability through the combination of living CDSA and thiol-ene chemistry by using OPV5 -b-PNAAM32 (PNAAM = poly(N-allyl acrylamide)) as a model is reported. Uniform fiber-like micelles with tunable length can be generated by self-seeding of living CDSA. By taking advantage of radical thiol-ene reaction between vinyls of PNAAM corona and four-arm thiols, the shell of micelles can be cross-linked with negligible destruction of structure of vinylene-containing OPV core. The resulting micelles show high morphological stability in NaCl solution and PBS buffer, even upon heating at 80 °C. The introduced extra thiol groups in the cross-linked shell can be further employed to install extra functional moieties via convenient thiol-Michael-type reaction. Given the negligible cytotoxicity of resulting CPNFs, this strategy opens an avenue to fabricate various CPNFs of diverse functionalities for biomedicine.

Solvent-Free Synthesis of Multifunctional Block Copolymer and Formation of DNA and Drug Nanocarriers

The synthesis of well-defined multifunctional polymers is of great importance for the development of complex materials for biomedical applications. In the current work, novel and multi-amino-functional diblock copolymer for potential gene and drug delivery applications was successfully synthesized. A highly efficient one-step and quantitative modification of an alkyne-functional polycarbonate-based precursor was performed, yielding double hydrophilic block copolymer with densely grafted primary amine side groups. The obtained positively charged block copolymer co-associated with DNA, forming stable and biocompatible nanosized polyplexes. Furthermore, polyion complex (PIC) micelles with tunable surface charge and decorated with cell targeting moieties were obtained as a result of direct mixing in aqueous media of the multi-amino-functional block copolymer and a previously synthesized oppositely charged block copolymer bearing disaccharide end-group. The obtained well-defined nanosized PIC-micelles were loaded with the hydrophobic drug curcumin. Both types of nanoaggregates (polyplexes and PIC-micelles) were physico-chemically characterized. Moreover, initial in vitro evaluations were performed to assess the nanocarriers' potential for biomedical applications.

Tunable, thiol-ene, interpenetrating network hydrogels of norbornene-modified carboxymethyl cellulose and cellulose nanofibrils

Carboxymethyl cellulose modified with norbornene groups (NorCMC) and cellulose nanofibrils (CNFs) produced through mechanical refining without chemical pretreatment formed interpenetrating network hydrogels through a UV-light initiated thiol-ene reaction. The molar ratio of thiols in crosslinkers to norbornene groups off the NorCMC (T:N), total polymer weight percent in the hydrogel, and weight percent of CNFs of the total polymer content of the hydrogels were varied to control hydrogel properties. This method enabled orders of magnitude changes to behavior. Swelling in aqueous environments could be significant (>150 %) without CNFs to minimal (<15 %) with the use of 50 % CNFs. NorCMC and CNF networks interacted synergistically to create hydrogels with compression modulus values spanning 1 to 150 kPa - the values of most biological tissues. T:N and total polymer weight percent could be varied to create hydrogels with different CNF content, but the same compression modulus, targeting 10 and 100 kPa hydrogels and providing a system that can independently vary fibrillar content and bulk modulus. Analysis of the effective crosslinks, thiol-ene network mesh size, and burst release of the polymer indicated synergistic interactions of the NorCMC thiol-ene and CNFs networks. These interactions enhanced modulus and degradation control of the network under physiological conditions.

Dual reactivity based dynamic covalent chemistry: mechanisms and applications

Dynamic covalent chemistry (DCC) focuses on the reversible formation, breakage, and exchange of covalent bonds and assemblies, setting a bridge between irreversible organic synthesis and supramolecular chemistry and finding wide utility. In order to enhance structural and functional diversity and complexity, different types of dynamic covalent reactions (DCRs) are placed in one vessel, encompassing orthogonal DCC without crosstalk and communicating DCC with a shared reactive functional group. As a means of adding tautomers, widespread in chemistry, to interconnected DCRs and combining the features of orthogonal and communicating DCRs, a concept of dual reactivity based DCC and underlying structural and mechanistic insights are summarized. The manipulation of the distinct reactivity of structurally diverse ring-chain tautomers allows selective activation and switching of reaction pathways and corresponding DCRs (C-N, C-O, and C-S) and assemblies. The coupling with photoswitches further enables light-mediated formation and scission of multiple types of reversible covalent bonds. To showcase the capability of dual reactivity based DCC, the versatile applications in dynamic polymers and luminescent materials are presented, paving the way for future functionalization studies.

Sulfur Centered Hydrogen Bonding in Thioglycolic Acid and Its Clusters: A Computational Exploration

The conformational landscape of thioglycolic acid (TGA) was investigated by using the CCSD/cc-pVTZ level of theory. The GGC conformer was identified as the global minimum, followed by the GAC conformer. The calculated rotational constant for the GGC conformer exhibited good agreement with the previously reported experimental results. Subsequently, the study delved into the exploration of sulfur-centered hydrogen bonding in TGA's dimer and trimer clusters, employing the CCSD/cc-pVDZ level of theory. These clusters revealed the participation of both oxygen and sulfur atoms in noncovalent H-bonding, contributing to their stability. The presence of these noncovalent interactions in TGA clusters was elucidated through Atoms in Molecule (AIM), reduced density gradient (RDG), and natural bond order (NBO) analysis, while electrostatic potential (ESP) charge and vibrational mode analysis further supported these findings.

UV-Induced Thiol-Ene "Click" Surface Grafting Polymerization on BOPP Substrate and Its Postmodifying for Hydrophilic and Antibacterial Applications

This paper proposed a novel and versatile surface modification route by integrating UV light-mediated thiol-ene "click" surface grafting polymerization and postmodification via the reactions of the surface thiol groups. At first, poly(thiol ether) layers with tunable thiol group density, up to 8.2 × 102 ea/nm3 for cross-linked grafting layers, were grafted from biaxially oriented polypropylene (BOPP) film. Then, the surface -SH groups reacted with epoxy compounds to introduce quaternary ammonium salt. With the immobilized quaternary ammonium salt and coordinated Zn2+ ions, the modified film demonstrated 99.98% antibacterial rate against Staphylococcus aureusafter soaking in DI water for 21 days and in a highly alkaline environment (0.1 M NaOH aqueous solution) for 3 days, and the surface water contact angle decreased to 39°. At last, the polymethacrylate chains were also successfully grafted from the surface thiol groups of the cross-linked poly(thiol ether) under visible light irradiation. With 2-(dimethyldodecylammonium) ethyl methacrylate as the grafting monomer, the modified BOPP film had shown a 99.99% antibacterial rate against both Escherichia coliand S. aureus. Meanwhile, with 2-methacryloxyethyl phosphoryl choline as grafting monomer, the modified surface showed an excellent antibioadhesion of living S. aureus, and the surface water contact angle was as low as 48°.

Thiyl radical induced cis/trans isomerism in double bond containing elastomers

This report presents an evaluation of thiyl radical-induced cis/trans isomerism in double bond-containing elastomers, such as natural, polychloroprene, and polybutadiene rubbers. The study aims to extensively investigate structural changes in polymers after functionalisation using thiol-ene chemistry, a useful click reaction for modifying polymers and developing materials with new functionalities. The paper reports on the use of different thiols, and cis/trans isomerism was detected through 1H NMR analysis, even at very low alkene/thiol mole ratios. The study finds that the configurational arrangements between non-functionalised elastomer units and thiolated units followed a trans-functionalised-cis units arrangement up to an alkene/thiol mole feed ratio of 0.3, while from 0.4 onward, a combination of trans-functionalised-cis and cis-functionalised-trans configurations are found. Additionally, it is observed that by increasing the level of functionalisation, the glass transition temperature of the resulting modified elastomer also increases. Overall, this study provides valuable insights into the effects of thiol-ene chemistry on the structure and properties of elastomers and could have important implications for the development of new materials with enhanced functionality.

Unraveling the Complex Polymorphic Crystallization Behavior of the Alternating Copolymer DMDS-alt-DVE

A complex crystallization behavior was observed for the alternating copolymer DMDS-alt-DVE synthesized via thiol-ene step-growth polymerization. Understanding the underlying complex crystallization processes of such innovative polythioethers is critical for their application, for example, in polymer coating technologies. These alternating copolymers have polymorphic traits, resulting in different phases that may display distinct crystalline structures. The copolymer DMDS-alt-DVE was studied in an earlier work, where only two crystalline phases were reported: a low melting, L - T_m, and high melting, H - T_m phase. Remarkably, the H - T_m form was only achieved by the previous formation and melting of the L - T_m form. We applied calorimetric techniques encompassing seven orders of magnitude in scanning rates to further explore this complex polymorphic behavior. Most importantly, by rapidly quenching the sample to temperatures well below room temperature, we detected an additional polymorphic form (characterized by a very low melting phase, denoted VL - T_m). Moreover, through tailored thermal protocols, we successfully produced samples containing only one, two, or all three polymorphs, providing insights into their interrelationships. Understanding polymorphism, crystallization, and the resulting morphological differences can have significant implications and potential impact on mechanical resistance and barrier properties.

Environmentally Friendly Strategies for Formulating Vegetable Oil-Based Nanoparticles for Anticancer Medicine

The development of green synthesized polymeric nanoparticles with anticancer studies has been an emerging field in academia and the pharmaceutical and chemical industries. Vegetable oils are potential substitutes for petroleum derivatives, as they present a clean and environmentally friendly alternative and are available in abundance at relatively low prices. Biomass-derived chemicals can be converted into monomers with a unique structure, generating materials with new properties for the synthesis of sustainable monomers and polymers. The production of bio-based polymeric nanoparticles is a promising application of green chemistry for biomedical uses. There is an increasing demand for biocompatible and biodegradable materials for specific applications in the biomedical area, such as cancer therapy. This is encouraging scientists to work on research toward designing polymers with enhanced properties and clean processes, containing oncology active pharmaceutical ingredients (APIs). The nanoencapsulation of these APIs in bio-based polymeric nanoparticles can control the release of the substances, increase bioavailability, reduce problems of volatility and degradation, reduce side effects, and increase treatment efficiency. This review discusses the use of green chemistry for bio-based nanoparticle production and its application in anticancer medicine. The use of castor oil for the production of renewable monomers and polymers is proposed as an ideal candidate for such applications, as well as more suitable methods for the production of bio-based nanoparticles and some oncology APIs available for anticancer application.

Polythioethers bearing side groups for efficient degradation by E1cB reaction: reaction design for polymerization and main-chain scission

We have previously reported the polycondensation by the tandem reactions of dithiols and α-(bromomethyl)acrylates, consisting of conjugate substitution (SN2' reaction) and conjugate addition (Michael addition) reactions. The resulting polythioethers underwent a main-chain scission (MCS) by E1cB reaction, which is the reverse reaction of conjugate addition, although it was not quantitative due to the equilibrium. Herein, the modification of the structures of polythioethers led to irreversible MCS, whereby the β-positions of ester moieties were substituted with a phenyl group. This slight modification in the polymer structure influenced the monomer structures and polymerization mechanisms. The understanding of reaction mechanisms by model reactions was required to obtain high molecular weights of polythioethers. It was clarified that the consequent additions of 1,4-diazabicyclo[2.2.2]octane (DABCO), 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), and PBu3 were effective to achieve high molecular weight. The resulting polythioethers decomposed by irreversible MCS via E1cB reaction with DBU.

Photoswitchable dynamic conjugate addition-elimination reactions as a tool for light-mediated click and clip chemistry

Phototriggered click and clip reactions can endow chemical processes with high spatiotemporal resolution and sustainability, but are challenging with a limited scope. Herein we report photoswitchable reversible covalent conjugate addition-elimination reactions toward light-addressed modular covalent connection and disconnection. By coupling between photochromic dithienylethene switch and Michael acceptors, the reactivity of Michael reactions was tuned through closed-ring and open-ring forms of dithienylethene, allowing switching on and off dynamic exchange of a wide scope of thiol and amine nucleophiles. The breaking of antiaromaticity in transition states and enol intermediates of addition-elimination reactions provides the driving force for photoinduced change in kinetic barriers. To showcase the versatile application, light-mediated modification of solid surfaces, regulation of amphiphilic assemblies, and creation/degradation of covalent polymers on demand were achieved. The manipulation of dynamic click/clip reactions with light should set the stage for future endeavors, including responsive assemblies, biological delivery, and intelligent materials.

Synthesis of patterned polyHIPE-hydrogel composite materials using thiol-ene chemistry

Elastomeric materials combining multiple properties within a single composite are highly desired in applications including biomaterials interfaces, actuators, and soft robotics. High spatial resolution is required to impart different properties across the composite for the intended application, but many techniques used to prepare these composites rely on multistep and complex methods. There is a need for the development of simple and efficient platforms to design layered composite materials. Here, we report the synthesis of horizontally- and vertically-patterned composites consisting of PDMS-based polymerized high internal phase emulsion (polyHIPE) porous elastomers and PDMS/PEG hydrogels. Composites with defined interfaces that were mechanically robust were prepared, and rheological analysis of the polyHIPE and hydrogel layers showed storage moduli values of ∼ 35 kPa and 45 kPa respectively. The compressive Young's Modulus and maximum strain of the polyHIPEs were dependent on the thiol to ene ratio in the formulation and obtained values ranging from 6 to 25 kPa and 50-65% respectively. The mechanical properties, total porosity of the polyHIPE, and swelling ratio of the hydrogel were unaffected by the patterning technique compared to non-patterned controls. PolyHIPE-hydrogel composite materials having up to 7-different horizontally pattered layers could be prepared that could expand and contract up hydration and drying.

New Functional Polymer Materials via Click Chemistry-Based Modification of Cellulose Acetate

Cellulose acetate (CA) was partially acrylated, and the resulting cellulose acetate acrylate (acryl-substitution degree of 0.2) underwent quantitative thio-Michael click reactions with various thiols. A toolbox of functional CA polymers was obtained in this way, and their properties were studied. The modification with fatty alkyl thiols led to hydrophobic materials with large water drop contact angles. Octadecylthio-, butoxycarbonylpropylthio-, and furanylthio-modifications formed highly transparent materials. The new derivative CAASFur disintegrated completely under industrial composting conditions. Films of modified CA polymers were cast and investigated in terms of barrier properties. The nanocomposite of CAAS18 compounded with a synthetic layered silicate (hectorite) of a large aspect ratio showed permeabilities as low as 0.09 g mm m^-2 day^-1 for water vapor and 0.16 cm³ mm m^-2 day^-1 atm^-1 for oxygen. This portfolio of functional CA polymers opens the door to new applications.

Photo-Crosslinkable Inorganic/Organic Sulfur Polymers

Inverse vulcanization techniques are used to fabricate thermodynamically stable, sulfur polymers. Sulfur-based polymers exhibit higher refractive indices and improved transparency in the mid-wave infrared region compared with most organic polymers. Herein, the postsynthetic modification of sulfur polymers created via inverse vulcanization to generate novel, inorganic/organic photoresists is discussed. Amine-containing sulfur resins are postfunctionalized with cross-linkable alkynes. The sulfur-based materials undergo rapid photo-crosslinking to generate patternable films within 10 min under UV irradiation (365 nm). The development of these resins enables sulfur polymers to be utilized in processes where spatial and hierarchical control is necessary. The generation of this class of materials also expands on sulfur-based organic polymer systems with optical applications.

Soft Hydroxyapatite Composites Based on Triazine-Trione Systems as Potential Biomedical Engineering Frameworks

Composites of triazine-trione (TATO) thiol-ene networks and hydroxyapatite (HA) have shown great potential as topological fixation materials for complex bone fractures due to their high flexural modulus, biocompatibility, and insusceptibility to forming soft-tissue adhesions. However, the rigid mechanical properties of these composites make them unsuitable for applications requiring softness. The scope of these materials could therefore be widened by the design of new TATO monomers that would lead to composites with a range of mechanical properties. In this work, four novel TATO-based monomers, decorated with either ester or amide linkages as well as alkene or alkyne end groups, have been proposed and synthesized via fluoride-promoted esterification (FPE) chemistry. The ester-modified monomers were then successfully formulated along with the thiol TATO monomer tris [2-(3-mercaptopropionyloxy)ethyl] isocyanurate (TEMPIC) and HA to give soft composites, following the established photo-initiated thiol-ene coupling (TEC) or thiol-yne coupling (TYC) chemistry methodologies. The most promising composite shows excellent softness, with a flexural modulus of 57 (2) MPa and ε_f at maximum σ_f of 11.8 (0.3)%, which are 117 and 10 times softer than the previously developed system containing the commercially available tri-allyl TATO monomer (TATATO). Meanwhile, the surgically convenient viscosity of the composite resins and their excellent cytotoxicity profile allow them to be used in the construction of soft objects in a variety of shapes through drop-casting suitable for biomedical applications.

Poly(N-allyl acrylamide) as a Reactive Platform toward Functional Hydrogels

The synthesis of poly(N-allyl acrylamide) (PNAllAm) as a platform for the preparation of functional hydrogels is described. The PNAllAm was synthesized via organocatalyzed amidation of poly(methyl acrylate) (PMA) with allylamine and characterized by ¹H NMR spectroscopy, size exclusion chromatography (SEC), and turbidimetry, which allowed an estimation of the lower critical solution temperature of ∼26 °C in water. The PNAllAm was then used to make functional hydrogels via photoinitiated thiol-ene chemistry, where dithiothreitol (DTT) was used to cross-link the polymer chains. In addition, mercaptoethanol (ME) was added as a functional thiol to modulate the hydrogel properties. A decrease of the volume-phase transition temperature of the resulting hydrogels was observed with increasing ME content. Altogether this work introduces a straightforward way for the preparation of PNAllAm from PMA and demonstrates its value as a reactive polymer platform for the generation of functional hydrogels.

Synthetic Nanoarchitectonics of Functional Organic-Inorganic 2D Germanane Heterostructures via Click Chemistry

Succeeding graphene, 2D inorganic materials made of reactive van der Waals layers, like 2D germanane (2D-Ge) derivatives, have attracted great attention because their physicochemical characteristics can be entirely tuned by modulating the nature of the surface substituent. Although very interesting from a scientific point of view, almost all the reported works involving 2D-Ge derivatives are focused on computational studies. Herein, a first prototype of organic-inorganic 2D-Ge heterostructure has been synthesized by covalently anchoring thiol-rich carbon dots (CD-SH) onto 2D allyl germanane (2D-aGe) via a simple and green "one-pot" click chemistry approach. Remarkably, the implanted characteristics of the carbon nanomaterial provide new physicochemical features to the resulting 0D/2D heterostructure, making possible its implementation in yet unexplored optoelectronic tasks-e.g., as a fluorescence resonance energy transfer (FRET) sensing system triggered by supramolecular π-π interactions-that are inaccessible for the pristine 2D-aGe counterpart. Consequently, this work builds a foundation toward the robust achievement of functional organic-inorganic 2D-Ge nanoarchitectonics through covalently assembling thiol-rich carbon nanoallotropes on commercially available 2D-aGe.

M, Zarrintaj P, Formela K, Saeb MR, Bencherif SA. Clickable Polysaccharides for Biomedical Applications: A Comprehensive Review

Recent advances in materials science and engineering highlight the importance of designing sophisticated biomaterials with well-defined architectures and tunable properties for emerging biomedical applications. Click chemistry, a powerful method allowing specific and controllable bioorthogonal reactions, has revolutionized our ability to make complex molecular structures with a high level of specificity, selectivity, and yield under mild conditions. These features combined with minimal byproduct formation have enabled the design of a wide range of macromolecular architectures from quick and versatile click reactions. Furthermore, copper-free click chemistry has resulted in a change of paradigm, allowing researchers to perform highly selective chemical reactions in biological environments to further understand the structure and function of cells. In living systems, introducing clickable groups into biomolecules such as polysaccharides (PSA) has been explored as a general approach to conduct medicinal chemistry and potentially help solve healthcare needs. De novo biosynthetic pathways for chemical synthesis have also been exploited and optimized to perform PSA-based bioconjugation inside living cells without interfering with their native processes or functions. This strategy obviates the need for laborious and costly chemical reactions which normally require extensive and time-consuming purification steps. Using these approaches, various PSA-based macromolecules have been manufactured as building blocks for the design of novel biomaterials. Clickable PSA provides a powerful and versatile toolbox for biomaterials scientists and will increasingly play a crucial role in the biomedical field. Specifically, bioclick reactions with PSA have been leveraged for the design of advanced drug delivery systems and minimally invasive injectable hydrogels. In this review article, we have outlined the key aspects and breadth of PSA-derived bioclick reactions as a powerful and versatile toolbox to design advanced polymeric biomaterials for biomedical applications such as molecular imaging, drug delivery, and tissue engineering. Additionally, we have also discussed the past achievements, present developments, and recent trends of clickable PSA-based biomaterials such as 3D printing, as well as their challenges, clinical translatability, and future perspectives.

Alternating Terpolymers through Cyclopolymerization and Subsequent Orthogonal Functionalization

A method for the synthesis of functionalized alternating copolymers by reversible deactivation radical polymerization was developed. Copolymerization by reversible addition-fragmentation chain transfer of hexenyl vinyl ether with a novel fluorinated divinyl monomer yields alternating cyclopolymers that can be chemoselectively modified by three distinct orthogonal functionalization reactions. Along the thiol-ene click reaction and amidation, a third functionalization was achieved via NHC-catalyzed transesterification or acylation resulting in a small library of ABC-type alternating terpolymers.

Eugenol-derived organic liquids as an in situ CO2 capturing and conversion system for Eugenol-based polycarbonate synthesis

The significant development of catalytic biomass conversion has provided a large library of chemicals ready for subsequent upgrading to polymerisable monomers for the design and preparation of sustainable polymers. In this study, hydroxyethylation of eugenol by using green ethylene carbonate as alkylation reagent and cheap tetrabutylammonium iodide ionic liquids as green solvents and catalysts produced 2-(4-allyl-2-methoxyphenoxy)ethan-1-ol with a 85% yield,  which could be used to construct an in situ CO 2 capture and conversion system by taking the reversible chemistry of alcoholic compounds with CO 2 in the presence of superbases, on which α,ω-diene functionalized carbonate monomers were successfully prepared and were applied in  thiol-ene click and acyclic diene metathesis polymerisation (ADMET), producing a series of poly(thioether carbonate)s and unsaturated aromatic aliphatic polycarbonates with moderate molecular weights and satisfactory thermal properties. The structures of the formed CO 2 reversible ILs, the polymerisable monomers and the corresponding polymers were fully characterized by various technologies.

Antibacterial and Angiogenic Poly(ionic liquid) Hydrogels

Wounds, particularly under low-hydration conditions, require more time to repair successfully. Therefore, there is an urgent need to develop wound dressings that can accelerate wound healing. Hydrogels, which can maintain a moist environment around the wound and allow gas to pass through the material, act as antibacterial hydrogels as dressings and have great application value in the treatment of wounds. In addition, wound dressings (hydrogels) containing antibacterial capacity have lasting antibacterial effects and reduce damage to cells. In this work, we firstly synthesized two antibacterial agents: imidazolium poly(ionic liquids) containing sulfhydryl (Imidazole-SH) and ε-Poly(lysine) containing SH (EPL-SH). Then, lysine as a cross-linking agent, by “thiol-ene” click reaction, was mixed with Deferoxamine (DFO) to prepare the antibacterial hydrogels. The in vitro assays showed that the hydrogels could effectively kill Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). In addition, it also could reduce the inflammatory response produced by Lipopolysaccharide (LPS). More importantly, according to the transwell and angiogenesis assays, DFO-incorporated hydrogels promoted the migration and vascular repair of human umbilical vein endothelial cells (HUVECs). All the results revealed that the hydrogels provided new strategies for wound dressings.

Polymerization of Myrcene in Both Conventional and Renewable Solvents: Postpolymerization Modification via Regioselective Photoinduced Thiol-Ene Chemistry for Use as Carbon Renewable Dispersants

Polymeric dispersants are useful materials used in many different industries and often derived from oil-based chemicals, for example, in automotive fluids so as to prevent particulates from precipitation and causing potential damage. These are very often polyisobutene derivatives, and there is a growing need to replace these using chemicals using renewable resources such as the use of naturally occurring myrcene. Polymyrcene (PMy), with an ordered microstructure, has been successfully synthesized via both anionic and radical polymerization in different solvents and subsequently subjected to functionalization via photoinduced thiol-ene click reactions with a number of thiols, methyl thioglycolate, 3-mercaptopropionic acid, 3-mercapto-1-hexanol, 2-mercaptoethanol, and 1-thioglycerol, using 2,2-dimethoxy-2-phenylacetophenone as a photoinitiator under UV irradiation (λ = 365 nm) at ambient temperature. The polarity of the solvent has an important impact on the microstructure of the produced polymyrcene and, in particular, 1,2-unit (∼4%), 3,4-unit (∼41%), and 1,4-unit (∼51%) PMy were obtained via anionic polymerization in a polar solvent (THF) at ambient temperature, while 3,4-unit (∼6%) and 1,4-unit (∼94%, including cis and trans) PMy were obtained with cyclohexane as the solvent. Subsequently, photochemical thiol-ene reactions were carried out on the resulting PMy with different isomers exhibiting different reactivities of the double bonds. This strategy allows for the introduction of functional/polar groups (-COOH, -OH) into hydrophobic PMy in a controlled process. Hydrogenation of PMy and derivatized PMy was carried out to investigate any effects on the stabilities of the products which are desirable for many applications.

Diketoenamine-based Vitrimers via Thiol-ene photopolymerization

Likened to both thermosets and thermoplastics, vitrimers are a unique class of materials that combine remarkable stability, healability, and reprocessability. Herein, we describe a photopolymerized thiol-ene-based vitrimer that undergoes dynamic covalent exchanges through uncatalyzed transamination of enamines derived from cyclic β-triketones, whereby the low energy barrier for exchange facilitates reprocessing and enables rapid depolymerization. Accordingly, we devised an alkene-functionalized β-triketone, 5,5-dimethyl-2-(pent-4-enoyl)cyclohexane-1,3-dione, which was reacted with 1,6-diaminohexane in a stoichiometrically imbalanced fashion (∼1:0.85 primary amine:triketone). The resulting networks exhibited subambient glass transition temperature (T_g = 5.66°C) by differential scanning calorimetry (DSC). Using a Maxwell stress-relaxation fit, the topology freezing temperature (T_v ) was calculated to be -32°C. Small-amplitude oscillatory shear (SAOS) rheological analysis enabled us to identify a practical critical temperature above which the vitrimer could be successfully reprocessed (T_v,eff ). Via the introduction of excess primary amines, we could readily degrade the networks into monomeric precursors, which were in turn reacted with diamines to regenerate reprocessable networks. Photopolymerization provides unique spatiotemporal control over the network topology, thereby opening the path for further investigation of vitrimer properties. As such, this work expands the toolbox of chemical upcycling of networks and enables their wider implementation. This article is protected by copyright. All rights reserved.

Closed-loop additive manufacturing of upcycled commodity plastic through dynamic cross-linking

A sustainable closed-loop manufacturing would become reality if commodity plastics can be upcycled into higher-performance materials with facile processability. Such circularity will be realized when the upcycled plastics can be (re)processed into custom-designed structures through energy/resource-efficient additive manufacturing methods, especially by approachable and scalable fused filament fabrication (FFF). Here, we introduce a circular model epitomized by upcycling a prominent thermoplastic, acrylonitrile butadiene styrene (ABS) into a recyclable, robust adaptive dynamic covalent network (ABS-vitrimer) (re)printable via FFF. The full FFF processing of ABS-vitrimer overcomes the major challenge of (re)printing cross-linked materials and produces stronger, tougher, solvent-resistant three-dimensional objects directly reprintable and separable from unsorted plastic waste. This study thus offers an imminently adoptable approach for advanced manufacturing toward the circular plastics economy.

Sulfur-Containing Silsesquioxane Derivatives Obtained by the Thiol-ene Reaction: Synthesis and Thermal Degradation

This article presents the synthesis of new derivatives of octa(3-thiopropyl)silsesquioxane (SSQ-8SH) via thiol-ene reaction with simple olefins bearing alkyl groups as well as methoxysilyl, substituted aryl or fluoroalkyl groups. All products were characterized by ¹ H NMR, ¹³ C NMR, ²⁹ Si NMR, FTIR, GPC, MALDI-TOF-MS, as well as thermal analysis (TGA) to confirm their structures, purity and thermal stability, and finally give some insight into their thermal degradation pathway. In some of the structures obtained, the T_5% values take place at high temperatures and are close to 230 °C. The thiol-ene reaction allowed to obtain 7 new compounds with high yield (>92 %), no by-products and in a relatively short time (24 h). All products are characterized by high conversion >99 %. New derivatives can find potential use as modifiers of plastics to improve their certain properties for example hydrophobicity or thermo-oxidative stability.

Photopatternable Poly(dimethylsiloxane) (PDMS) for an Intrinsically Stretchable Organic Electrochemical Transistor

Patterning elastomers is an essential process for the application of elastomers to stretchable bioelectric devices. In general, replication of a mold and laser ablation are used for patterning elastomers. However, these methods are inefficient and time consuming due to complex patterning procedures and a heat-induced curing mechanism. In this work, we developed a photopatternable elastomer called thiol-ene cross-linked poly(dimethylsiloxane) (TC-PDMS). TC-PDMS showed high-resolution patternability (∼100 μm) through a direct patterning process. It also had high stretchability (∼140%) and low Young's modulus (∼2.9 MPa) similar to conventional PDMS. To demonstrate its practicability in stretchable bioelectric devices, TC-PDMS was applied to a passivation layer of an intrinsically stretchable organic electrochemical transistor (OECT), which showed a low leakage current (∼20 μA) and a high transconductance (0.432 mS) at high strain (60%). The stretchable OECT was able to record electrocardiographic (ECG) signals from human skin, and the measured ECG signals exhibited a high signal-to-noise ratio of 12.2 dB.

Hetero and homo α,ω‐chain‐end functionalized polyphosphazenes

The control of chain‐ends is fundamental in modern macromolecular chemistry for directed one‐to‐one bioconjugation and the synthesis of advanced architectures such as block copolymers or bottlebrush polymers and the preparation of advanced soft materials. Polyphosphazenes are of growing importance as elastomers, biodegradable materials and in biomedical drug delivery due to their synthetic versatility. While controlled polymerization methods have been known for some time, controlling both chain‐ends with high fidelity has proven difficult. We demonstrate a robust synthetic route to hetero and homo α,ω‐chain‐end functionalized polyphosphazenes via end‐capping with easily accessible, functionalized triphenylphosphine‐based phosphoranimines. A versatile thiol‐ene “click”‐reaction approach then allows for subsequent conversion of the end‐capped polymers with various functional groups. Finally, we demonstrate the utility of this system to prepare gels based on homo α,ω‐chain‐end functionalized polyphosphazenes. This development will enhance their progress in various applications, particularly in soft materials and as degradable polymers.

Photopolymerized Features via Beam Pen Lithography as a Novel Tool for the Generation of Large Area Protein Micropatterns

A cantilever-free scanning probe lithography (CF-SPL)-based method for the rapid polymerization of nanoscale features on a surface via crosslinking and thiol-acrylate photoreactions is described, wherein the nanoscale position, height, and diameter of each feature can be finely and independently tuned. With precise spatiotemporal control over the illumination pattern, beam pen lithography (BPL) allows for the photo-crosslinking of polymers into ultrahigh resolution features over centimeter-scale areas using massively parallel >160 000 pen arrays of individually addressable pens that guide and focus light onto the surface with sub-diffraction resolution. The photoinduced crosslinking reaction of the ink material, which is composed of photoinitiator, diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide, poly(ethylene glycol) diacrylate, and thiol-modified functional binding molecules (i.e., thiol-PEG-biotin or 16-mercaptohexanoic acid), proceeds to ≈80% conversion with UV exposure (72 mW cm^-2 ) for short time periods (0.5 s). Such polymer patterns are further reacted with proteins (streptavidin and fibronectin) to yield protein arrays with feature arrangements at high resolution and densities controlled by local UV exposure. This platform, which combines polymer photochemistry and massive arrays of scanning probes, constitutes a new approach to making biomolecular microarrays in a high-throughput and high-yielding manner, opening new routes for biochip synthesis, bioscreening, and cell biology research.

Preparation of Thioaminals in Water

The presence of sulfur–carbon bonds is transversal to several areas of chemistry, e.g., drug discovery, materials, and chemical biology. However, a lack of efficient and sustainable procedures for the preparation of thioaminals, the N,S-analogues of O,O-acetals, contributes to this functional group often being overlooked by the scientific community. In this work is described the formation of thioaminals in water promoted by copper(II) triflate.