Catch and Release: Photocleavable Cationic Diblock Copolymers as a Potential Platform for Nucleic Acid Delivery

Two-Photon Light Trigger siRNA Transfection of Cancer Cells Using Non-Toxic Porous Silicon Nanoparticles

The concept of using two-photon excitation in the NIR for the spatiotemporal control of biological processes holds great promise. However, its use for the delivery of nucleic acids has been very scarcely described and the reported procedures are not optimal as they often involve potentially toxic materials and irradiation conditions. This work prepares a simple system made of biocompatible porous silicon nanoparticles (pSiNP) for the safe siRNA photocontrolled delivery and gene silencing in cells upon two-photon excitation. PSiNP are linked to an azobenzene moiety, which possesses a lysine group (pSiNP@ICPES-azo@Lys) to efficiently complex siRNA. Non-linear excitation of the two-photon absorber system (pSiNP) followed by intermolecular energy transfer (FRET) to trans azobenzene moiety, result in the photoisomerization of the azobenzene from trans to cis and in the destabilization of the azobenzene-siRNA complex, thus inducing the delivery of the cargo siRNA to the cytoplasm of cells. Efficient silencing in MCF-7 expressing stable firefly luciferase with siRNAluc against luciferase is observed. Furthermore, siRNA against inhibitory apoptotic protein (IAP) leads to over 70% of MCF-7 cancer cell death. The developed technique using two-photon light allows a unique high spatiotemporally controlled and safe siRNA delivery in cells in few seconds of irradiation.

Photolabile Well-Defined Polystyrene Grafted on Silica Nanoparticle via Nitroxide-Mediated Polymerization (NMP)

Herein, the synthesis of a novel nitroxide-mediated polymerization (NMP) initiator bearing a photolabile ortho-nitrobenzyl (oNB) group allowing surface-initiated NMP preparation of well-defined photoresponsive polystyrene grafted on silica nanoparticles is described. The photocleavable and photoresponsive properties of the prepared materials are demonstrated using small angle X-ray scattering (SAXS) characterization.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Recent Advances in Hybrid Biomimetic Polymer-Based Films: from Assembly to Applications

Biological membranes, in addition to being a cell boundary, can host a variety of proteins that are involved in different biological functions, including selective nutrient transport, signal transduction, inter- and intra-cellular communication, and cell-cell recognition. Due to their extreme complexity, there has been an increasing interest in developing model membrane systems of controlled properties based on combinations of polymers and different biomacromolecules, i.e., polymer-based hybrid films. In this review, we have highlighted recent advances in the development and applications of hybrid biomimetic planar systems based on different polymeric species. We have focused in particular on hybrid films based on (i) polyelectrolytes, (ii) polymer brushes, as well as (iii) tethers and cushions formed from synthetic polymers, and (iv) block copolymers and their combinations with biomacromolecules, such as lipids, proteins, enzymes, biopolymers, and chosen nanoparticles. In this respect, multiple approaches to the synthesis, characterization, and processing of such hybrid films have been presented. The review has further exemplified their bioengineering, biomedical, and environmental applications, in dependence on the composition and properties of the respective hybrids. We believed that this comprehensive review would be of interest to both the specialists in the field of biomimicry as well as persons entering the field.

Combining Top-Down and Bottom-Up with Photodegradable Layer-by-Layer Films

Layer-by-layer (LbL) self-assembly of polymer coatings is a bottom-up fabrication technique with broad applicability across a wide range of materials and applications that require control over interfacial properties. While most LbL coatings are chemically uniform in directions both tangent and perpendicular to their substrate, control over the properties of surface coatings as a function of space can enhance their function. To contribute to this rapidly advancing field, our group has focused on the top-down spatiotemporal control possible with photochemically reactive LbL coatings, harnessed through charge-shifting polyelectrolytes enabled by photocleavable ester pendants. The photolysis of the photocleavable esters degrades LbL films containing these polyelectrolytes. The chemical structures of the photocleavable groups dictate the wavelengths responsible for disrupting these coatings, ranging from ultraviolet to near-infrared in our work. In addition, spatially segregating reactive groups into "compartments" within LbL films has enabled us to fabricate reactive free-standing polymer films and multiheight photopatterned coatings. Overall, by combining bottom-up and top-down approaches, photoreactive LbL films enable precise control over the interfacial properties of polymer and composite coatings.

Highly efficient gene release in spatiotemporal precision approached by light and pH dual responsive copolymers

Triblock copolymer of poly(ethylene glycol)-b-poly(2-dimethylaminoethyl methacrylate)-b-poly(pyrenylmethyl methacrylate) (PEG-b-PDMAEMA-b-PPy) has been developed for use as an ideal gene delivery system, which showed both high stability under physiological conditions and efficient gene release in a mimetic cancer environment. The siRNA release from this system without external stimulation was 16% in 1 h and then remained steady. However, the photo-triggered siRNA release was 78% within 1 h and was higher than 91% after 24 h. The remarkable contrast between the stability and release efficiency of these siRNA-condensed micelleplexes before and after photo-irradiation has been rationalized by the light- and pH-induced structural transitions of the triblock copolymer micelles. The negligible cytotoxicity, high cellular uptake efficiency, and remarkable knockdown efficiency shown in in vitro tests further revealed the promising potential of these triblock copolymer micelleplexes for use in stimuli-responsive gene therapy.

Nanocomplexes of Photolabile Polyelectrolyte and Upconversion Nanoparticles for Near-Infrared Light-Triggered Payload Release

A new approach to encapsulating charged cargo molecules into a nanovector and subsequently using near-infrared (NIR) light to trigger the release is demonstrated. NIR light-responsive nanovector was prepared through electrostatic interaction-driven complexation between negatively charged silica-coated upconversion nanoparticles (UCNP@silica, 87 nm hydrodynamic diameter, polydispersity index ∼0.05) and a positively charged UV-labile polyelectrolyte bearing pendants of poly(ethylene glycol) and o-nitrobenzyl side groups; whereas charged fluorescein (FLU) was loaded through a co-complexation process. By controlling the amount of polyelectrolyte, UCNP@silica can be covered by the polymer, whereas remaining dispersed in aqueous solution. Under 980 nm laser excitation, UV light emitted by UCNP is absorbed by photolytic side groups within polyelectrolyte, which results in cleavage of o-nitrobenzyl groups and formation of carboxylic acid groups. Such NIR light-induced partial reversal of positive charge to negative charge on the polyelectrolyte layer disrupts the equilibrium among UCNP@silica, polyelectrolyte, and FLU and, consequently, leads to release of FLU molecules.

A 'photorelease, catch and photorelease' strategy for bioconjugation utilizing a p-hydroxyphenacyl group

A bioorthogonal 'catch and photorelease' strategy, which combines alkyne-azide cycloaddition between p-hydroxyphenacyl azide and alkyne derivatives to form a 1,2,3-triazole adduct and subsequent photochemical release of the triazole moiety via a photo-Favorskii rearrangement, is introduced. The first step can also involve photorelease of a strained alkyne and its Cu-free click reaction with azide.

Attenuation of Maladaptive Responses in Aortic Adventitial Fibroblasts through Stimuli-Triggered siRNA Release from Lipid-Polymer Nanocomplexes

Lipid-siRNA assemblies are modified with photo-responsive polymers to enable spatiotemporally-controlled silencing of interleukin 1 beta (IL1β) and cadherin 11 (CDH11), two genes that are essential drivers of maladaptive responses in human aortic adventitial fibroblasts (AoAFs). These hybrid nanocomplexes address the critical challenge of locally mitigating fibrotic actions that lead to the high rates of vascular graft failures. In particular, the lipid-polymer formulations provide potent silencing of IL1β and CDH11 that is precisely modulated by a photo-release stimulus. Moreover, a dynamic modeling framework is used to design a multi-dose siRNA regimen that sustains knockdown of both genes over clinically-relevant timescales. Multi-dose suppression illuminates a cooperative role for IL1β and CDH11 in pathogenic adventitial remodeling and is directly linked to desirable functional outcomes. Specifically, myofibroblast differentiation and cellular proliferation, two of the primary hallmarks of fibrosis, are significantly attenuated by IL1β silencing. Meanwhile, the effects of CDH11 siRNA treatment on differentiation become more pronounced at higher cell densities characteristic of constrictive adventitial remodeling in vivo. Thus, this work offers a unique formulation design for photo-responsive gene suppression in human primary cells and establishes a new dosing method to satisfy the critical need for local attenuation of fibrotic responses in the adventitium surrounding vascular grafts.

Predicting Gene Silencing Through the Spatiotemporal Control of siRNA Release from Photo-responsive Polymeric Nanocarriers

New materials and methods are needed to better control the binding vs. release of nucleic acids for a wide range of applications that require the precise regulation of gene activity. In particular, novel stimuli-responsive materials with improved spatiotemporal control over gene expression would unlock translatable platforms in drug discovery and regenerative medicine technologies. Furthermore, an enhanced ability to control nucleic acid release from materials would enable the development of streamlined methods to predict nanocarrier efficacy a priori, leading to expedited screening of delivery vehicles. Herein, we present a protocol for predicting gene silencing efficiencies and achieving spatiotemporal control over gene expression through a modular photo-responsive nanocarrier system. Small interfering RNA (siRNA) is complexed with mPEG-b-poly(5-(3-(amino)propoxy)-2-nitrobenzyl methacrylate) (mPEG-b-P(APNBMA)) polymers to form stable nanocarriers that can be controlled with light to facilitate tunable, on/off siRNA release. We outline two complementary assays employing fluorescence correlation spectroscopy and gel electrophoresis for the accurate quantification of siRNA release from solutions mimicking intracellular environments. Information gained from these assays was incorporated into a simple RNA interference (RNAi) kinetic model to predict the dynamic silencing responses to various photo-stimulus conditions. In turn, these optimized irradiation conditions allowed refinement of a new protocol for spatiotemporally controlling gene silencing. This method can generate cellular patterns in gene expression with cell-to-cell resolution and no detectable off-target effects. Taken together, our approach offers an easy-to-use method for predicting dynamic changes in gene expression and precisely controlling siRNA activity in space and time. This set of assays can be readily adapted to test a wide variety of other stimuli-responsive systems in order to address key challenges pertinent to a multitude of applications in biomedical research and medicine.

Anionic Polymer and Quantum Dot Excipients to Facilitate siRNA Release and Self-Reporting of Disassembly in Stimuli-Responsive Nanocarrier Formulations

The incorporation of anionic excipients into polyplexes is a promising strategy for modulating siRNA binding versus release and integrating diagnostic capabilities; however, specific design criteria and structure-function relationships are needed to facilitate the development of nanocarrier-based theranostics. Herein, we incorporated poly(acrylic acid) (PAA) and quantum dot (QD) excipients into photolabile siRNA polyplexes to increase gene silencing efficiencies by up to 100% and enable self-reporting of nanocarrier disassembly. Our systematic approach identified the functional relationships between gene silencing and key parameters such as excipient loading fractions and molecular weights that facilitated the establishment of design rules for optimization of nanocarrier efficacy. For example, we found that PAA molecular weights ∼10-20× greater than that of the coencapsulated siRNA exhibited the most efficient release and silencing. Furthermore, siRNA release assays and RNAi modeling allowed us to generate a PAA "heat map" that predicted gene silencing a priori as a function of PAA molecular weight and loading fraction. QDs further promoted selective siRNA release and provided visual as well as Förster resonance energy transfer (FRET)-based monitoring of the dynamic changes in nanostructure in situ. Moreover, even with the addition of anionic components, our formulations exhibited substantially improved stability and shelf life relative to typical formulations, with complete stability after a week of storage and full activity in the presence of serum. Taken together, this study enabled synergistic improvements in siRNA release and diagnostic capabilities, along with the development of mechanistic insights that are critical for advancing the translation of nucleic acid theranostics into the clinic.

Efficient tuning of siRNA dose response by combining mixed polymer nanocarriers with simple kinetic modeling

Two of the most prominent challenges that limit the clinical success of siRNA therapies are a lack of control over cargo release from the delivery vehicle and an incomplete understanding of the link between gene silencing dynamics and siRNA dosing. Herein, we address these challenges through the formulation of siRNA polyplexes containing light-responsive polymer mixtures, whose varied compositions and triggered release behavior provide enhanced gene silencing and controlled dose responses that can be predicted by simple kinetic models. Through the straightforward mixing of two block copolymers, the level of gene knockdown was easily optimized to achieve the maximum level of GAPDH protein silencing in NIH/3T3 cells (~70%) using a single siRNA dose. The kinetic model was used to describe the dynamic changes in mRNA and protein concentrations in response to siRNA treatment. These predictions enabled the application of a second dose of siRNA to maximally suppress gene expression over multiple days, leading to a further 50% reduction in protein levels relative to those measured following a single dose. Furthermore, polyplexes remained dormant in cells until exposed to the photo-stimulus, demonstrating the complete control over siRNA activity as well as the stability of the nanocarriers. Thus, this work demonstrates that pairing advances in biomaterials design with simple kinetic modeling provides new insight into gene silencing dynamics and presents a powerful strategy to control gene expression through siRNA delivery.

STATEMENT OF SIGNIFICANCE

Our manuscript describes two noteworthy impacts: (1) we designed mixed polymer formulations to enhance gene silencing, and (2) we simultaneously developed a simple kinetic model for determining optimal siRNA dose responses to maintain silencing over several days. These advances address critical challenges in siRNA delivery and provide new opportunities in therapeutics development. The structure-function relationships prevalent in these formulations were established to enable tuning and forecasting of nanocarrier efficiency a priori, leading to siRNA dosing regimens able to maximally suppress gene expression. Our advances are significant because the mixed polymer formulations provide a straightforward and scalable approach to tailor siRNA delivery regimens. Moreover, the implementation of accurate dosing frameworks addresses a major knowledge gap that has hindered clinical implementation of siRNA.

Polymeric Biomaterials: Diverse Functions Enabled by Advances in Macromolecular Chemistry

Biomaterials have been extensively used to leverage beneficial outcomes in various therapeutic applications, such as providing spatial and temporal control over the release of therapeutic agents in drug delivery as well as engineering functional tissues and promoting the healing process in tissue engineering and regenerative medicine. This perspective presents important milestones in the development of polymeric biomaterials with defined structures and properties. Contemporary studies of biomaterial design have been reviewed with focus on constructing materials with controlled structure, dynamic functionality, and biological complexity. Examples of these polymeric biomaterials enabled by advanced synthetic methodologies, dynamic chemistry/assembly strategies, and modulated cell-material interactions have been highlighted. As the field of polymeric biomaterials continues to evolve with increased sophistication, current challenges and future directions for the design and translation of these materials are also summarized.

Triggered Release of Encapsulated Cargo from Photoresponsive Polyelectrolyte Nanocomplexes

Combining the numerous advantages of using light as a stimulus, simple free radical random copolymerization, and the easy, all-aqueous preparation of polyelectrolyte complexes (PECs), we prepared photolabile PEC nanoparticles and demonstrated their rapid degradation under UV light. As a proof of concept demonstration, the dye Nile Red was encapsulated in the PECs and successfully released into the surrounding solution as the polyelectrolyte nanocomplex carriers dissolved upon light irradiation.

Synthesis of Photo- and pH Dual-Sensitive Amphiphilic Copolymer PEG43-b-P(AA76-co-NBA35-co-tBA9) and Its Micellization as Leakage-Free Drug Delivery System for UV-Triggered Intracellular Delivery of Doxorubicin

Novel photo- and pH dual-sensitive amphiphilic copolymers containing photolabile o-nitrobenzyl (NB) groups were designed via combination of ATRP, hydrolyzation, and simple esterification reaction and self-assembled into stimuli-regulated amphiphilic micelles in aqueous solution. On the basis of the optimization of the morphology and particle size of the micelles via modulating the number of the photocleavable o-nitrobenzyl acrylate (NBA) units, the unique ones assembled from PEG43-b-P(AA76-co-NBA35-co-tBA9) with an average hydrodynamic diameter (Dh) of 163 nm was selected as a potential drug delivery system (DDS) for UV-triggered delivery of doxorubicin (DOX). The micelles possessed a favorable drug-loading capacity (DLC) of 27.5%, with the hydrodynamic diameter of 213 nm after DOX-loading. Most importantly, the DOX-loaded PEG43-b-P(AA76-co-NBA35-co-tBA9) micelles exhibited a cumulative DOX release ratio of only 3.69% in the simulated physiological medium within 6 days without UV-irradiation, indicating their potential as leakage-free DDS. As in the acidic media mimicking the tumor microenvironment, a high cumulative DOX release ratio of 74.70% was achieved within 6 days after UV-irradiation for 20 min, showing a sustained release behavior. Under UV-irradiation, the photolabile o-nitrobenzyl moieties were cleaved off, the amphiphilic copolymer transformed into a water-soluble polymer, favoring the metabolism of drug carriers, and the micelles were demicellized to accelerate the drug release in a triggered or on-demand manner.

Engineered non-toxic cationic nanocarriers with photo-triggered slow-release properties

A simple and versatile strategy using cationic amphiphilic diblock copolymers synthesized by a combination of ATRP and post-polymerization quaternization to prepare photo-responsive nanocarriers showing slow-release properties and low cytotoxicity was reported.

Technologies for controlled, local delivery of siRNA

The discovery of RNAi in the late 1990s unlocked a new realm of therapeutic possibilities by enabling potent and specific silencing of theoretically any desired genetic target. Better elucidation of the mechanism of action, the impact of chemical modifications that stabilize and reduce nonspecific effects of siRNA molecules, and the key design considerations for effective delivery systems has spurred progress toward developing clinically-successful siRNA therapies. A logical aim for initial siRNA translation is local therapies, as delivering siRNA directly to its site of action helps to ensure that a sufficient dose reaches the target tissue, lessens the potential for off-target side effects, and circumvents the substantial systemic delivery barriers. While locally injected or topically applied siRNA has progressed into numerous clinical trials, an enormous opportunity exists to develop sustained-release, local delivery systems that enable both spatial and temporal control of gene silencing. This review focuses on material platforms that establish both localized and controlled gene silencing, with emphasis on the systems that show most promise for clinical translation.

Light-mediated activation of siRNA Release in diblock copolymer assemblies for controlled gene silencing

Controllable release is particularly important for the delivery of small interfering RNA (siRNA), as siRNAs have a high susceptibility to enzymatic degradation if release is premature, yet lack silencing activity if they remain inaccessible within the cytoplasm. To overcome these hurdles, novel and tailorable mPEG-b-poly(5-(3-(amino)propoxy)-2-nitrobenzyl methacrylate) (mPEG-b-P(APNBMA)) diblock copolymers containing light-sensitive o-nitrobenzyl moieties and pendant amines are employed to provide both efficient siRNA binding, via electrostatic and hydrophobic interactions, as well as triggered charge reversal and nucleic acid release. In particular, siRNA/mPEG-b-P(APNBMA)23.6 polyplexes show minimal aggregation in physiological salt and serum, and enhanced resistance to polyanion-induced unpackaging compared to polyethylenimine preparations. Cellular delivery of siRNA/mPEG-b-P(APNBMA)23.6 polyplexes reveals greater than 80% cellular transfection, as well as rapid and widespread cytoplasmic distribution. Additionally, UV irradiation indicates ≈70% reduction in targeted gene expression following siRNA/mPEG-b-P(APNBMA)23.6 polyplex treatment, as compared to 0% reduction in polyplex-treated cells without UV irradiation, and only ≈30% reduction for Lipofectamine-treated cells. The results here highlight the potential of these light-sensitive copolymers with a well-defined on/off switch for applications including cellular patterning for guided cell growth and extension, and cellular microarrays for exploring protein and drug interactions that require enhanced spatiotemporal control of gene activation.

Opportunities for multicomponent hybrid hydrogels in biomedical applications

Hydrogels provide mechanical support and a hydrated environment that offer good cytocompatibility and controlled release of molecules, and myriad hydrogels thus have been studied for biomedical applications. In the past few decades, research in these areas has shifted increasingly to multicomponent hydrogels that better capture the multifunctional nature of native biological environments and that offer opportunities to selectively tailor materials properties. This review summarizes recent approaches aimed at producing multicomponent hydrogels, with descriptions of contemporary chemical and physical approaches for forming networks, and of the use of both synthetic and biologically derived molecules to impart desired properties. Specific multicomponent materials with enhanced mechanical properties are presented, as well as materials in which multiple biological functions are imparted for applications in tissue engineering, cancer treatment, and gene therapies. The progress in the field suggests significant promise for these approaches in the development of biomedically relevant materials.

Tuning PEGylation of mixed micelles to overcome intracellular and systemic siRNA delivery barriers

A series of endosomolytic mixed micelles was synthesized from two diblock polymers, poly[ethylene glycol-b-(dimethylaminoethyl methacrylate-co-propylacrylic acid-co-butyl methacrylate)] (PEG-b-pDPB) and poly[dimethylaminoethyl methacrylate-b-(dimethylaminoethyl methacrylate-co-propylacrylic acid-co-butyl methacrylate)] (pD-b-pDPB), and used to determine the impact of both surface PEG density and PEG molecular weight on overcoming both intracellular and systemic siRNA delivery barriers. As expected, the percent PEG composition and PEG molecular weight in the corona had an inverse relationship with mixed micelle zeta potential and rate of cellular internalization. Although mixed micelles were internalized more slowly, they generally produced similar gene silencing bioactivity (∼ 80% or greater) in MDA-MB-231 breast cancer cells as the micelles containing no PEG (100 D/no PEG). The mechanistic explanation for the potent bioactivity of the promising 50 mol% PEG-b-DPB/50 mol% pD-b-pDPB (50 D) mixed micelle formulation, despite its relatively low rate of cellular internalization, was further investigated as a function of PEG molecular weight (5 k, 10 k, or 20 k PEG). Results indicated that, although larger molecular weight PEG decreased cellular internalization, it improved cytoplasmic bioavailability due to increased intracellular unpackaging (quantitatively measured via FRET) and endosomal release. When delivered intravenously in vivo, 50 D mixed micelles with a larger molecular weight PEG in the corona also demonstrated significantly improved blood circulation half-life (17.8 min for 20 k PEG micelles vs. 4.6 min for 5 kDa PEG micelles) and a 4-fold decrease in lung accumulation. These studies provide new mechanistic insights into the functional effects of mixed micelle-based approaches to nanocarrier surface PEGylation. Furthermore, the ideal mixed micelle formulation identified (50 D/20 k PEG) demonstrated desirable intracellular and systemic pharmacokinetics and thus has strong potential for in vivo therapeutic use.