1
|
Siva Prasad P, Byram PK, Hazra C, Chakravorty N, Sen R, Das S, Das K. Biosurfactant-Assisted Cu Doping of Brushite Coatings: Enhancing Structural, Electrochemical, and Biofunctional Properties. ACS APPLIED MATERIALS & INTERFACES 2024; 16:10601-10622. [PMID: 38376231 DOI: 10.1021/acsami.3c15471] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/21/2024]
Abstract
Stainless steel (316L SS) has been widely used in orthopedic, cardiovascular stents, and other biomedical implant applications due to its strength, corrosion resistance, and biocompatibility. To address the weak interaction between steel implants and tissues, it is a widely adopted strategy to enhance implant performance through the application of bioactive coatings. In this study, Cu-doped brushite coatings were deposited successfully through pulse electrodeposition on steel substrates facilitated with a biosurfactant (BS) (i.e., surfactin). Further, the combined effect of various concentrations of Cu ions and BS on the structural, electrochemical, and biological properties was studied. The X-ray diffraction (XRD) confirms brushite composition with Cu substitution causing lattice contraction and a reduced crystallite size. The scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) studies reveal the morphological changes of the coatings with the incorporation of Cu, which is confirmed by X-ray photoelectron spectroscopy (XPS) and elemental mapping. The Fourier transform infrared (FTIR) and Raman spectroscopy confirm the brushite and Cu doping in the coatings, respectively. Increased surface roughness and mechanical properties of Cu-doped coatings were analyzed by using atomic force microscopic (AFM) and nanohardness tests, respectively. Electrochemical assessments demonstrate corrosion resistance enhancement in Cu-doped coatings, which is further improved with the addition of biosurfactants. In vitro biomineralization studies show the Cu-doped coating's potential for osseointegration, with added stability. The cytocompatibility of the coatings was analyzed using live/dead and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assays; cell adhesion, proliferation, and migration studies were evaluated using SEM. Antibacterial assays highlight significant improvement in the antibacterial properties of Cu-doped coatings with BS. Thus, the developed Cu-doped brushite coatings with BS demonstrate their potential in the realm of biomedical implant technologies, paving the way for further exploration.
Collapse
Affiliation(s)
- Pakanati Siva Prasad
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| | - Prasanna Kumar Byram
- School of Medical Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur721302, India
| | - Chinmay Hazra
- Department of Biotechnology, Indian Institute of Technology Kharagpur, Kharagpur721302, India
| | - Nishant Chakravorty
- School of Medical Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur721302, India
| | - Ramkrishna Sen
- Department of Biotechnology, Indian Institute of Technology Kharagpur, Kharagpur721302, India
| | - Siddhartha Das
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| | - Karabi Das
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
| |
Collapse
|
2
|
Dorozhkin SV. There Are over 60 Ways to Produce Biocompatible Calcium Orthophosphate (CaPO4) Deposits on Various Substrates. JOURNAL OF COMPOSITES SCIENCE 2023; 7:273. [DOI: 10.3390/jcs7070273] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 07/02/2024]
Abstract
A The present overview describes various production techniques for biocompatible calcium orthophosphate (abbreviated as CaPO4) deposits (coatings, films and layers) on the surfaces of various types of substrates to impart the biocompatible properties for artificial bone grafts. Since, after being implanted, the grafts always interact with the surrounding biological tissues at the interfaces, their surface properties are considered critical to clinical success. Due to the limited number of materials that can be tolerated in vivo, a new specialty of surface engineering has been developed to desirably modify any unacceptable material surface characteristics while maintaining the useful bulk performance. In 1975, the development of this approach led to the emergence of a special class of artificial bone grafts, in which various mechanically stable (and thus suitable for load-bearing applications) implantable biomaterials and artificial devices were coated with CaPO4. Since then, more than 7500 papers have been published on this subject and more than 500 new publications are added annually. In this review, a comprehensive analysis of the available literature has been performed with the main goal of finding as many deposition techniques as possible and more than 60 methods (double that if all known modifications are counted) for producing CaPO4 deposits on various substrates have been systematically described. Thus, besides the introduction, general knowledge and terminology, this review consists of two unequal parts. The first (bigger) part is a comprehensive summary of the known CaPO4 deposition techniques both currently used and discontinued/underdeveloped ones with brief descriptions of their major physical and chemical principles coupled with the key process parameters (when possible) to inform readers of their existence and remind them of the unused ones. The second (smaller) part includes fleeting essays on the most important properties and current biomedical applications of the CaPO4 deposits with an indication of possible future developments.
Collapse
Affiliation(s)
- Sergey V. Dorozhkin
- Faculty of Physics, M.V. Lomonosov Moscow State University, Leninskie Gory 1-2, Moscow 119991, Russia
| |
Collapse
|
3
|
Gopi D, Shinyjoy E, Karthika A, Nithiya S, Kavitha L, Rajeswari D, Tang T. Retraction: Single walled carbon nanotubes reinforced mineralized hydroxyapatite composite coatings on titanium for improved biocompatible implant applications. RSC Adv 2023; 13:9845. [PMID: 37000179 PMCID: PMC10043640 DOI: 10.1039/d3ra90024j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2023] [Accepted: 03/22/2023] [Indexed: 03/30/2023] Open
Abstract
Retraction of ‘Single walled carbon nanotubes reinforced mineralized hydroxyapatite composite coatings on titanium for improved biocompatible implant applications’ by D. Gopi et al., RSC Adv., 2015, 5, 36766–36778, https://doi.org/10.1039/C5RA04382D.
Collapse
Affiliation(s)
- D. Gopi
- Department of Chemistry, Periyar UniversitySalem 636011TamilnaduIndia+91 427 2345124+91 427 2345766
- Centre for Nanoscience and Nanotechnology, Periyar UniversitySalem 636011TamilnaduIndia
| | - E. Shinyjoy
- Department of Chemistry, Periyar UniversitySalem 636011TamilnaduIndia+91 427 2345124+91 427 2345766
| | - A. Karthika
- Department of Chemistry, Periyar UniversitySalem 636011TamilnaduIndia+91 427 2345124+91 427 2345766
| | - S. Nithiya
- Department of Chemistry, Periyar UniversitySalem 636011TamilnaduIndia+91 427 2345124+91 427 2345766
| | - L. Kavitha
- Department of Physics, School of Basic and Applied Sciences, Central University of TamilnaduThiruvarur 610 101TamilnaduIndia
| | - D. Rajeswari
- Department of Chemistry, Periyar UniversitySalem 636011TamilnaduIndia+91 427 2345124+91 427 2345766
| | - Tingting Tang
- Shanghai Key Laboratory of Orthopaedic Implants, Department of Orthopedic Surgery, Shanghai Ninth People’s Hospital, Shanghai Jiaotong University School of Medicine639 Zhizaoju RoadShanghai 20011P. R. China
| |
Collapse
|
4
|
Synthesis, Characterization, Antibacterial, Antifungal, Antioxidant, and Anticancer Activities of Nickel-Doped Hydroxyapatite Nanoparticles. FERMENTATION 2022. [DOI: 10.3390/fermentation8120677] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022] Open
Abstract
The purpose of this research was to investigate the possible antibacterial, antifungal, antioxidant, and anticancer effects of nickel (Ni2+)-doped hydroxyapatite (HAp) nanoparticles (NPs) synthesized using the sol–gel approach. X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy (Raman), field-emission scanning electron microscopy (FESEM), and elemental analysis were used to characterize the Ni2+-doped HApNPs. X-ray diffraction investigation showed that the nanoscale structure of Ni2+-doped HApNPs was hexagonal, with an average crystallite size of 39.91 nm. Ni2+-doped HApNPs were found to be almost spherical in form and 40–50 nm in size, as determined by FESEM analysis. According to EDAX, the atomic percentages of Ca, O, P, and Ni were 20.93, 65.21, 13.32, and 0.55, respectively. Ni2+-doped HApNPs exhibited substantial antibacterial properties when tested in vitro against several pathogens, including Escherichia coli, Shigella flexneri, Klebsiella pneumoniae, Pseudomonas aeruginosa, and Staphylococcus aureus. Antibacterial activity, at 50 mg tested concentration, demonstrated superior effects on G-ve bacteria than G+ve pathogens. The antifungal activity of Oidium caricae, Aspergillus flavus, and A. niger revealed a zone of inhibition of 23, 11, and 5 mm, respectively. These actions rely on the organism’s cell wall structure, size, and shape. Incorporating Ni2+ into HApNPs allows them to function as powerful antioxidants. Ni2+-doped HApNPs had a good cytotoxic impact against the HeLa cell line, which improved with increasing concentration and was detected at a 68.81 µg/mL dosage. According to the findings of this study, the Ni2+-doped HApNPs are extremely promising biologically active candidates owing to their improved functional features.
Collapse
|
5
|
Raji R, Elangomannan S, Subramani R, Louis K, Periasamy M, Dhanaraj G. Calotropis Gigantea Fiber-A Biogenic Reinforcement Material for Europium Substituted Hydroxyapatite/Poly(3,4-propylenedioxythiophene) Matrix: A Novel Ternary Composite for Biomedical Applications. ACS OMEGA 2022; 7:6024-6034. [PMID: 35224363 PMCID: PMC8867816 DOI: 10.1021/acsomega.1c06372] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/12/2021] [Accepted: 01/28/2022] [Indexed: 06/14/2023]
Abstract
Novel multifunctional biocomposite materials that mimic the properties of bone are the need of the hour. In view of this, the current work is focused on the fabrication of a snail shells derived europium-substituted hydroxyapatite (Eu-HAP)/poly(3,4-propylenedioxythiophene) (PProDOT)/Calotropis gigantea fiber (CGF) ternary composite on titanium (Ti) for biomedical applications. The structural, morphological, mechanical, electrochemical, and biological properties of the as-developed coatings on Ti were characterized. The obtained results clearly confirmed the formation and properties of the ternary composite (Eu-HAP/PProDOT/CGF). The presence of CGF, an exceptional reinforcement material, in the ternary composite is proven to improve mechanical and biological properties compared to other coatings (i.e., coating without CGF). Also, electrochemical studies revealed better anticorrosion properties of the composite-coated Ti in a simulated body fluid (SBF) solution. Similarly, the presence of Eu-HAP and PProDOT in the composite is clearly evident from the antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) and also by the cell proliferation and cell adhesion by the MTT assay test. Thus, we suggest that the fabricated Eu-HAP/PProDOT/CGF ternary composite with mechanical, corrosion resistance, and biocompatible properties might be an appropriate candidate for biomedical applications.
Collapse
Affiliation(s)
- Ramachandran Raji
- Department
of Chemistry, Periyar University, Salem 636011, Tamil Nadu, India
| | - Shinyjoy Elangomannan
- Department
of Physics, School of Basic and Applied Sciences, Central University of Tamil Nadu, Thiruvarur 610101, Tamil
Nadu, India
| | - Ramya Subramani
- Department
of Physics, School of Basic and Applied Sciences, Central University of Tamil Nadu, Thiruvarur 610101, Tamil
Nadu, India
| | - Kavitha Louis
- Department
of Physics, School of Basic and Applied Sciences, Central University of Tamil Nadu, Thiruvarur 610101, Tamil
Nadu, India
| | - Manoravi Periasamy
- Materials
Chemistry and Metal Fuel Cycle Group, Indira
Gandhi Centre for Atomic Research, Kalpakkam 603102, Tamil
Nadu, India
| | - Gopi Dhanaraj
- Department
of Chemistry, Periyar University, Salem 636011, Tamil Nadu, India
| |
Collapse
|
6
|
Electrochemical Surface Biofunctionalization of Titanium through Growth of TiO2 Nanotubes and Deposition of Zn Doped Hydroxyapatite. COATINGS 2022. [DOI: 10.3390/coatings12010069] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
The current research aim is to biofunctionalize pure titanium (Ti, grade IV) substrate with titania nanotubes and Zn doped hydroxyapatite-based coatings by applying a duplex electrochemical treatment, and to evaluate the influence of Zn content on the physico-chemical properties of hydroxyapatite (HAp). The obtained nanostructured surfaces were covered with HAp-based coatings doped with Zn in different concentrations by electrochemical deposition in pulsed galvanostatic mode. The obtained surfaces were characterized in terms of morphology, elemental and phasic composition, chemical bonds, roughness, and adhesion. The nanostructured surface consisted of titania nanotubes (NT), aligned, vertically oriented, and hollow, with an inner diameter of ~70 nm. X-ray Diffraction (XRD) analysis showed that the nanostructured surface consists of an anatase phase and some rutile peaks as a secondary phase. The morphology of all coatings consisted of ribbon like-crystals, and by increasing the Zn content the coating became denser due to the decrement of the crystals’ dimensions. The elemental and phase compositions evidenced that HAp was successfully doped with Zn through the pulsed galvanostatic method on the Ti nanostructured surfaces. Fourier Transform Infrared spectroscopy (FTIR) and XRD analysis confirmed the presence of HAp in all coatings, while the adhesion test showed that the addition of a high quantity leads to some delamination. Based on the obtained results, it can be said that the addition of Zn enhances the properties of HAp, and through proper experimental design, the concentration of Zn can be modulated to achieve coatings with tunable features.
Collapse
|
7
|
Electrodeposited Hydroxyapatite-Based Biocoatings: Recent Progress and Future Challenges. COATINGS 2021. [DOI: 10.3390/coatings11010110] [Citation(s) in RCA: 30] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Hydroxyapatite has become an important coating material for bioimplants, following the introduction of synthetic HAp in the 1950s. The HAp coatings require controlled surface roughness/porosity, adequate corrosion resistance and need to show favorable tribological behavior. The deposition rate must be sufficiently fast and the coating technique needs to be applied at different scales on substrates having a diverse structure, composition, size, and shape. A detailed overview of dry and wet coating methods is given. The benefits of electrodeposition include controlled thickness and morphology, ability to coat a wide range of component size/shape and ease of industrial processing. Pulsed current and potential techniques have provided denser and more uniform coatings on different metallic materials/implants. The mechanism of HAp electrodeposition is considered and the effect of operational variables on deposit properties is highlighted. The most recent progress in the field is critically reviewed. Developments in mineral substituted and included particle, composite HAp coatings, including those reinforced by metallic, ceramic and polymeric particles; carbon nanotubes, modified graphenes, chitosan, and heparin, are considered in detail. Technical challenges which deserve further research are identified and a forward look in the field of the electrodeposited HAp coatings is taken.
Collapse
|
8
|
Furko M, Balázsi C. Morphological, Chemical, and Biological Investigation of Ionic Substituted, Pulse Current Deposited Calcium Phosphate Coatings. MATERIALS (BASEL, SWITZERLAND) 2020; 13:E4690. [PMID: 33096807 PMCID: PMC7589307 DOI: 10.3390/ma13204690] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/15/2020] [Revised: 10/16/2020] [Accepted: 10/19/2020] [Indexed: 11/17/2022]
Abstract
Ionic substituted calcium phosphate coatings (iCP) have been prepared by the electrochemical pulse current deposition technique with an alternate pulse on and off time of 5 ms onto a titanium alloy substrate. The elemental distribution and morphology of the deposited layers have been extensively studied by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and transmission electron microscopy (TEM). The crystallinity and phase structure of iCPs have been investigated by X-ray diffraction (XRD). The corrosion characteristics and biodegradability of coatings have been determined by electrochemical measurements, recording potentiodynamic curves in a physiological solution over a long-term immersion period. The cell viability tests confirmed that the iCP coating was biocompatible, while the corrosion tests proved its biodegradable characteristic. In our paper, we compare the morphological, chemical, and biological characteristics of silver and zinc substituted calcium phosphate layers deposited by the electrochemical method.
Collapse
Affiliation(s)
- Monika Furko
- Institute for Technical Physics and Materials Science, Centre for Energy Research, Konkoly-Thege str. 29-33, 1121 Budapest, Hungary;
| | | |
Collapse
|
9
|
Using Ca2.9Nd0.1Co4O9+δ perovskites to convert a flexible carbon nanotube based supercapacitor to a battery-like device. Electrochim Acta 2020. [DOI: 10.1016/j.electacta.2020.136768] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
10
|
Ghosh R, Swart O, Westgate S, Miller BL, Yates MZ. Antibacterial Copper-Hydroxyapatite Composite Coatings via Electrochemical Synthesis. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2019; 35:5957-5966. [PMID: 30951314 DOI: 10.1021/acs.langmuir.9b00919] [Citation(s) in RCA: 28] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Antibacterial copper-hydroxyapatite (Cu-HA) composite coatings on titanium were synthesized using a novel process consisting of two consecutive electrochemical reactions. In the first stage, HA nanocrystals were grown on titanium using the cathodic electrolytic synthesis. The HA-coated titanium was then used as the cathode in a second reaction stage to electrochemically reduce Cu2+ ions in solution to metallic Cu nanoparticles. Reaction conditions were found that result in nanoscale Cu particles growing on the surface of the HA crystals. The two-stage synthesis allows facile control of copper content in the HA coatings. Antibacterial activity was measured by culturing Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) in the presence of coatings having varying copper contents. The coatings displayed copper concentration-dependent antibacterial activity against both types of bacteria, likely due to the slow release of copper ions from the coatings. The observation of antibacterial activity from a relatively low loading of copper on the bioactive HA support suggests that multifunctional implant coatings can be developed to supplement or supplant prophylactic antibiotics used in implant surgery that are responsible for creating resistant bacteria strains.
Collapse
Affiliation(s)
- Rashmi Ghosh
- Department of Chemical Engineering , University of Rochester , Rochester , New York 14623 , United States
| | - Oliver Swart
- Department of Dermatology , University of Rochester , Rochester , New York 14611 , United States
| | - Sabrina Westgate
- Department of Chemical Engineering , University of Rochester , Rochester , New York 14623 , United States
| | - Benjamin L Miller
- Department of Dermatology , University of Rochester , Rochester , New York 14611 , United States
| | - Matthew Z Yates
- Department of Chemical Engineering , University of Rochester , Rochester , New York 14623 , United States
- Laboratory for Laser Energetics , University of Rochester , Rochester , New York 14627 , United States
| |
Collapse
|
11
|
Xiao S, Wang M, Wang L, Zhu Y. Environment-Friendly Synthesis of Trace Element Zn, Sr, and F Codoping Hydroxyapatite with Non-cytotoxicity and Improved Osteoblast Proliferation and Differentiation. Biol Trace Elem Res 2018; 185:148-161. [PMID: 29349676 DOI: 10.1007/s12011-017-1226-5] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/01/2017] [Accepted: 12/18/2017] [Indexed: 01/26/2023]
Abstract
Hydroxyapatite (HAp, Ca10[PO4]6[OH]2) doped with numerous trace elements possesses sensational biochemical effects in natural bones. To study the biochemical function of Zn, Sr, and F elements, a series of neoteric HAp biomaterials with Zn, Sr, and F concentrations close to natural bones are firstly synthesized by one-pot hydrothermal method. These materials are characterized through powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscope (SEM). All the synthesized materials are HAp phase. The morphology of these materials is nanorods. The phenomenon that L929 cells can live even at 400 μg/mL powder concentration indicates that these materials are non-cytotoxic. The active effects of samples on proliferation and differentiation of osteoblast cells (MC3T3-E1) are certified by MTT and alkaline phosphatase (ALP) activity assays. The adhesion and proliferation of osteoblast measurement manifest that amounts of MC3T3-E1 advances about 1.86 times for ZnSrF/HAp compared with undoped HAp. This achievement may inspire us on the artificial design of new-style bionic bone grafts using trace bioactive elements and also suggest its latent applications in orthopedic surgery and bone osseointegration.
Collapse
Affiliation(s)
- Shengjie Xiao
- Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Ming Wang
- Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Liping Wang
- Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China
- University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Yingchun Zhu
- Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China.
- University of Chinese Academy of Sciences, Beijing, 100049, China.
| |
Collapse
|
12
|
Gayathri B, Muthukumarasamy N, Velauthapillai D, Santhosh S, asokan V. Magnesium incorporated hydroxyapatite nanoparticles: Preparation, characterization, antibacterial and larvicidal activity. ARAB J CHEM 2018. [DOI: 10.1016/j.arabjc.2016.05.010] [Citation(s) in RCA: 42] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022] Open
|
13
|
Suo L, Jiang N, Wang Y, Wang P, Chen J, Pei X, Wang J, Wan Q. The enhancement of osseointegration using a graphene oxide/chitosan/hydroxyapatite composite coating on titanium fabricated by electrophoretic deposition. J Biomed Mater Res B Appl Biomater 2018; 107:635-645. [PMID: 29802685 DOI: 10.1002/jbm.b.34156] [Citation(s) in RCA: 26] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/08/2018] [Revised: 04/15/2018] [Accepted: 04/22/2018] [Indexed: 02/05/2023]
Abstract
Titanium (Ti) has been commonly used as an implant material in dentistry and bone surgery for several decades. Meanwhile, surface modification of titanium can enhance the osseointegration of implants. In this study, a graphene oxide/chitosan/hydroxyapatite (GO/CS/HA) composite coating was fabricated by electrophoretic deposition on Ti substrates. Subsequently, the surface morphology, phase composition, wettability, and bonding strength of this composite coating were researched. Additionally, in vitro cytological examination was performed, including evaluations of cell adhesion, cell viability, cell differentiation, cell mineralization, and osteogenetic factor expression. Finally, the in vivo osteogenetic properties were evaluated through an animal study, including a histological analysis, a microcomputed tomography, and biomechanical tests. The results showed that a homogeneous and crack-free GO/CS/HA composite coating was coated on Ti, and the wettability and bonding strength of the GO/CS/HA composite coating were enhanced compared with HA, GO/HA, and CS/HA coatings. Furthermore, the GO/CS/HA coating greatly heightened the cell-material interactions in vitro. Additionally, this GO/CS/HA-Ti implant could enhance osseointegration in vivo. Consequently, GO/CS/HA-Ti may have potential applications in the field of dental implants. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 635-645, 2019.
Collapse
Affiliation(s)
- Lai Suo
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China.,Tianjin Stomatological Hospital, NanKai University, Tianjin, China
| | - Nan Jiang
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Yan Wang
- Yantai City Stomatological Hospital, Yantai, China
| | - Puyu Wang
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Junyu Chen
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Xibo Pei
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Jian Wang
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| | - Qianbing Wan
- State Key Laboratory of Oral Diseases, National Clinical Research Center for Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu, China
| |
Collapse
|
14
|
Sathishkumar S, Louis K, Shinyjoy E, Gopi D. Tailoring the Sm/Gd-Substituted Hydroxyapatite Coating on Biomedical AISI 316L SS: Exploration of Corrosion Resistance, Protein Profiling, Osteocompatibility, and Osteogenic Differentiation for Orthopedic Implant Applications. Ind Eng Chem Res 2016. [DOI: 10.1021/acs.iecr.5b04329] [Citation(s) in RCA: 39] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Affiliation(s)
- Saravanan Sathishkumar
- Department
of Chemistry, Periyar University, Salem 636011, India
- Centre
for Nanoscience and Nanotechnology, Periyar University, Salem 636011, India
| | - Kavitha Louis
- Department
of Physics, School of Basic and Applied Sciences, Central University of Tamilnadu, Thiruvarur 610101, India
| | | | - Dhanaraj Gopi
- Department
of Chemistry, Periyar University, Salem 636011, India
- Centre
for Nanoscience and Nanotechnology, Periyar University, Salem 636011, India
| |
Collapse
|
15
|
Calcium orthophosphate deposits: Preparation, properties and biomedical applications. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2015; 55:272-326. [PMID: 26117762 DOI: 10.1016/j.msec.2015.05.033] [Citation(s) in RCA: 75] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/16/2014] [Revised: 03/21/2015] [Accepted: 05/08/2015] [Indexed: 01/12/2023]
Abstract
Since various interactions among cells, surrounding tissues and implanted biomaterials always occur at their interfaces, the surface properties of potential implants appear to be of paramount importance for the clinical success. In view of the fact that a limited amount of materials appear to be tolerated by living organisms, a special discipline called surface engineering was developed to initiate the desirable changes to the exterior properties of various materials but still maintaining their useful bulk performances. In 1975, this approach resulted in the introduction of a special class of artificial bone grafts, composed of various mechanically stable (consequently, suitable for load bearing applications) implantable biomaterials and/or bio-devices covered by calcium orthophosphates (CaPO4) to both improve biocompatibility and provide an adequate bonding to the adjacent bones. Over 5000 publications on this topic were published since then. Therefore, a thorough analysis of the available literature has been performed and about 50 (this number is doubled, if all possible modifications are counted) deposition techniques of CaPO4 have been revealed, systematized and described. These CaPO4 deposits (coatings, films and layers) used to improve the surface properties of various types of artificial implants are the topic of this review.
Collapse
|
16
|
Huang Y, Zhang X, Mao H, Li T, Zhao R, Yan Y, Pang X. Osteoblastic cell responses and antibacterial efficacy of Cu/Zn co-substituted hydroxyapatite coatings on pure titanium using electrodeposition method. RSC Adv 2015. [DOI: 10.1039/c4ra12118j] [Citation(s) in RCA: 94] [Impact Index Per Article: 10.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022] Open
Abstract
Effective physiological bone integration and absence of bacterial infection are essential for a successful orthopaedic or dental implant.
Collapse
Affiliation(s)
- Yong Huang
- College of Lab Medicine
- Hebei North University
- Zhangjiakou 075000
- China
- Institute of Life Science and Technology
| | - Xuejiao Zhang
- College of Lab Medicine
- Hebei North University
- Zhangjiakou 075000
- China
| | - Huanhuan Mao
- Institute of Life Science and Technology
- University of Electronic Science and Technology of China
- Chengdu 610054
- China
| | - Tingting Li
- Institute of Life Science and Technology
- University of Electronic Science and Technology of China
- Chengdu 610054
- China
| | - Ranlin Zhao
- Institute of Life Science and Technology
- University of Electronic Science and Technology of China
- Chengdu 610054
- China
| | - Yajing Yan
- Institute of Life Science and Technology
- University of Electronic Science and Technology of China
- Chengdu 610054
- China
| | - Xiaofeng Pang
- Institute of Life Science and Technology
- University of Electronic Science and Technology of China
- Chengdu 610054
- China
- International Centre for Materials Physics
| |
Collapse
|
17
|
Gopi D, Shinyjoy E, Karthika A, Nithiya S, Kavitha L, Rajeswari D, Tang T. Single walled carbon nanotubes reinforced mineralized hydroxyapatite composite coatings on titanium for improved biocompatible implant applications. RSC Adv 2015. [DOI: 10.1039/c5ra04382d] [Citation(s) in RCA: 41] [Impact Index Per Article: 4.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Carbon nanotubes reinforced mineralized hydroxyapatite (CNT/M-HAP) composite coating on titanium by pulsed electrodeposition is a promising approach to produce bioimplants with better osseointegration capacity and improved mechanical property.
Collapse
Affiliation(s)
- D. Gopi
- Department of Chemistry
- Periyar University
- Salem 636011
- India
- Centre for Nanoscience and Nanotechnology
| | - E. Shinyjoy
- Department of Chemistry
- Periyar University
- Salem 636011
- India
| | - A. Karthika
- Department of Chemistry
- Periyar University
- Salem 636011
- India
| | - S. Nithiya
- Department of Chemistry
- Periyar University
- Salem 636011
- India
| | - L. Kavitha
- Department of Physics
- School of Basic and Applied Sciences
- Central University of Tamilnadu
- Thiruvarur 610 101
- India
| | - D. Rajeswari
- Department of Chemistry
- Periyar University
- Salem 636011
- India
| | - Tingting Tang
- Shanghai Key Laboratory of Orthopaedic Implants
- Department of Orthopedic Surgery
- Shanghai Ninth People's Hospital
- Shanghai Jiaotong University School of Medicine
- Shanghai 20011
| |
Collapse
|
18
|
Karthika A, Kavitha L, Surendiran M, Kannan S, Gopi D. Fabrication of divalent ion substituted hydroxyapatite/gelatin nanocomposite coating on electron beam treated titanium: mechanical, anticorrosive, antibacterial and bioactive evaluations. RSC Adv 2015. [DOI: 10.1039/c5ra05624a] [Citation(s) in RCA: 34] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
The strontium, magnesium and zinc substituted hydroxyapatite/gelatin (M-HAP/Gel) nanocomposite coating on electron beam treated titanium will definitely be an effective implant material for better cell growth in orthopedic applications.
Collapse
Affiliation(s)
- A. Karthika
- Department of Chemistry
- Periyar University
- Salem 636011
- India
| | - L. Kavitha
- Department of Physics
- School of Basic and Applied Sciences
- Central University of Tamilnadu
- Thiruvarur 610101
- India
| | - M. Surendiran
- Department of Chemistry
- Periyar University
- Salem 636011
- India
| | - S. Kannan
- Department of Zoology
- School of Life Sciences
- Periyar University
- Salem-636 011
- India
| | - D. Gopi
- Department of Chemistry
- Periyar University
- Salem 636011
- India
- Centre for Nanoscience and Nanotechnology
| |
Collapse
|