Multilayer PVA/gelatin nanofibrous scaffolds incorporated with Tanacetum polycephalum essential oil and amoxicillin for skin tissue engineering application

Wound infection is still an important challenge in healing of different types of skin injuries. This highlights the need for new and improved antibacterial agents with novel and different mechanisms of action. In this study, by electrospinning process Tanacetum polycephalum essential oil (EO), as a natural antibacterial and anti-inflammatory agent, along with Amoxicillin (AMX) as an antibiotic are incorporated into PVA/gelatin-based nanofiber mats individually and in combination to fabricate a novel wound dressing. Briefly, we fabricated PVA/gelatin loaded by Amoxicillin as first layer for direct contact with wound surface to protects the wound from exogenous bacteria, and then built a PVA/gelatin/Tanacetum polycephalum essential oil layer on the first layer to help cleanses the wound from infection and accelerates wound closure. Finally, PVA/gelatin layer as third layer fabricated on middle layer to guarantee desirable mechanical properties. For each layer, the electrospinning parameters were adjusted to form bead-free fibers. The morphology of fabricated nanofiber scaffolds was characterized by Fourier-transform infrared (FTIR) and scanning electron microscopy (SEM). Microscopic images demonstrated the smooth bead-free microstructures fabrication of every layer of nanofiber with a uniform fiber size of 126.888 to 136.833 nm. While, EO and AMX increased the diameter of nanofibers but there was no change in physical structure of nanofiber. The water contact angle test demonstrated hydrophilicity of nanofibers with 47.35°. Although EO and AMX had little effect on reducing hydrophilicity but nanofibers with contact angle between 51.4° until 65.4° are still hydrophilic. Multilayer nanofibers loaded by EO and AMX killed 99.99 % of both gram-negative and gram-positive bacteria in comparison with control and PVA/gelatin nanofiber. Also, in addition to confirming the non-toxicity of nanofibers, MTT results also showed the acceleration of cell proliferation. In vivo wound evaluation in mouse models showed that designed nanofibrous scaffolds could be an appropriate option for wound treatment due to their positive effect on angiogenesis, collagen deposition, granulation tissue formation, epithelialization, and wound closure.

Multifunctional Nanoclay-Based Hemostatic Materials for Wound Healing: A Review

Bleeding to death accounts for around 30-40% of all trauma-related fatalities. Current hemostatic materials are mainly mono-functional or have insufficient hemostatic capacity. Nanoclay has been recently shown to accelerate hemostasis, improve wound healing, and provide the resulting multifunctional hemostatic materials antibacterial, anti-inflammatory, and healing-promoting due to its distinctive morphological structure and physicochemical properties. Herein, the chemical design and action mechanism of nanoclay-based hemostatic, antibacterial, and pro-wound healing materials in the context of wound healing are discussed. The physiological processes of hemostasis and wound healing to elucidate the significance of nanoclay for functional wound hemostatic dressing design are outlined. A summary of the features of various nanoclay and product types used in wound hemostatic dressings is provided. Nanoclay can be antimicrobial due to the slow release of metal ions and has an abundant surface charge allowing for high affinity for proteins and cells, which can activate the coagulation reaction or facilitate tissue repair. Nanoclay with a microporous structure can be used as drug carriers to create composites critical for inhibiting bacterial growth on wounds or promoting the regeneration of vascular, muscle, and skin tissues. Directions for further research and innovation of nanoclay-based multifunctional materials for hemostasis and tissue regeneration are explored.

Investigation on the Potential Application of Na-Attapulgite as an Excipient in Domperidone Sustained-Release Tablets

In this study, Na-attapulgite was explored as an excipient to prepare domperidone sustained-release tablets and test them in accordance with United States Pharmacopoeia requirements. Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC) were employed to explore the compatibility between Na-attapulgite and domperidone. The XRD and DSC show no interaction between the drug and Na-attapulgite. The FTIR spectrum indicates a shift in the absorption of N-H in the drug molecule, which can be explained by the hydrogen bonding interaction between the N-H in the DOM molecule and the -OH on the surface of Na-ATP. The diameter, hardness, friability and drug content of the tablets were measured, and they all met the relevant requirements of the United States Pharmacopoeia. In addition, the tablets with Na-attapulgite as excipient exhibit a better release performance within the release time of 12 h. These results demonstrate that the domperidone sustained-release tablets have been successfully prepared by using Na-attapulgite as an excipient. The doping of Na-ATP in domperidone sustained-release tablets improves the cytocompatibility. Moreover, with the increase of Na-ATP content, cells proliferate remarkably and cell activity is significantly enhanced.

Nanoclays in medicine: a new frontier of an ancient medical practice

Clays have been used as early as 2500 BC in human civilization for medicinal purposes. The ease of availability, biocompatibility, and versatility of these unique charged 2D structures abundantly available in nature have enabled the extensive applications of clays in human history. Recent advances in the use of clays in nanostructures and as components of polymer clay nanocomposites have exponentially expanded the use of clays in medicine. This review covers the details of structures and biomedical applications of several common clays, including montmorillonite, LAPONITE®, kaolinite, and halloysite. Here we describe the applications of these clays in wound dressings as hemostatic agents in drug delivery of drugs for cancer and other diseases and tissue engineering. Also reviewed are recent experimental and modeling studies that elucidate the impact of clay structures on cellular processes and cell adhesion processes. Various mechanisms of clay-mediated bioactivity, including protein localization, modulation of cell adhesion, biomineralization, and the potential of clay nanoparticles to impact cell differentiation, are presented. We also review the current developments in understanding the impact of clays on cellular responses. This review also elucidates new emerging areas of use of nanoclays in osteogenesis and the development of in vitro models of bone metastasis of cancer.

Synthetic electrospun nanofibers as a supportive matrix in osteogenic differentiation of induced pluripotent stem cells

Continuous remodeling is not able to repair large bone defects. Bone tissue engineering is aimed to repair these defects by creating bone grafts. To do this, several technologies and biomaterials have been employed to fabricate an in vivo-like supportive matrix. Electrospinning is a versatile technique to fabricate porous matrices with interconnected pores and high surface area, replicating in vivo microenvironment. Electrospun scaffolds have been used in a large number of studies to provide a matrix for bone regeneration and osteogenic differentiation of stem cells such as induced pluripotent stem cells (iPSCs). Electrospinning uses both natural and synthetic polymers, either alone or in combination, to fabricate scaffolds. Among them, synthetic polymers have had a great promise in bone regeneration and repair. They allow the fabrication of biocompatible and biodegradable scaffolds with high mechanical properties, suitable for bone engineering. Furthermore, several attempts have done to increase the osteogenic properties of these scaffolds. This paper reviewed the potential of synthetic electrospun scaffolds in osteogenic differentiation of iPSCs. In addition, the approaches to improve the osteogenic differentiation of these scaffolds are addressed.

3D printed biocompatible graphene oxide, attapulgite, and collagen composite scaffolds for bone regeneration

Tissue-engineered bone material is one of the effective methods to repair bone defects, but the application is restricted in clinical because of the lack of excellent scaffolds that can induce bone regeneration as well as the difficulty in making scaffolds with personalized structures. 3D printing is an emerging technology that can fabricate bespoke 3D scaffolds with precise structure. However, it is challenging to develop the scaffold materials with excellent printability, osteogenesis ability, and mechanical strength. In this study, graphene oxide (GO), attapulgite (ATP), type I collagen (Col I) and polyvinyl alcohol were used as raw materials to prepare composite scaffolds via 3D bioprinting. The composite materials showed excellent printability. The microcosmic architecture and properties was characterized by scanning electron microscopy, Fourier transform infrared and thermal gravimetric analyzer, respectively. To verify the biocompatibility of the scaffolds, the viability, proliferation and osteogenic differentiation of Bone Marrow Stromal Cells (BMSCs) on the scaffolds were assessed by CCK-8, Live/Dead staining and Real-time PCR in vitro. The composited scaffolds were then implanted into the skull defects on rat for bone regeneration. Hematoxylin-eosin staining, Masson staining and immunohistochemistry staining were carried out in vivo to evaluate the regeneration of bone tissue.The results showed that GO/ATP/COL scaffolds have been demonstrated to possess controlled porosity, water absorption, biodegradability and good apatite-mineralization ability. The scaffold consisting of 0.5% GO/ATP/COL have excellent biocompatibility and was able to promote the growth, proliferation and osteogenic differentiation of mouse BMSCs in vitro. Furthermore, the 0.5% GO/ATP/COL scaffolds were also able to promote bone regeneration of in rat skull defects. Our results illustrated that the 3D printed GO/ATP/COL composite scaffolds have good mechanical properties, excellent cytocompatibility for enhanced mouse BMSCs adhesion, proliferation, and osteogenic differentiation. All these advantages made it potential as a promising biomaterial for osteogenic reconstruction.

Attapulgite-doped electrospun PCL scaffolds for enhanced bone regeneration in rat cranium defects

Electrospun PCL scaffolds have been widely used for tissue engineering as they have shown great potential to mimic the structure of the natural extracellular matrix (ECM). However, the small pore size and low bioactivity of the scaffolds limit cell migration and tissue formation. In this study, PCL (polycaprolactone), PCL/PEG (polyethylene glycol), and PCL/PEG/ATP (nano-attapulgite) scaffolds were fabricated via electrospinning. To increase the porosity of the scaffolds, they were washed to remove water-soluble PEG fibers. Then the porous structure was measured using scanning electron microscopy (SEM) and atomic force microscopy (AFM), which showed an increased porosity when PEG fibers were removed in PCL/PEG and PCL/PEG/ATP scaffolds. Moreover, the mechanical properties were also analyzed in dry and wet conditions. In vitro mouse multipotent mesenchymal precursor cells were used to assess the biocompatibility of the scaffolds, and osteogenesis was analyzed using CCK-8 and real-time PCR (RT-PCR) methods. Moreover, in vivo μCT, histological and immunohistochemical analyses were conducted to evaluate new bone formation in rat cranium defect models. Washed PCL/PEG/ATP scaffolds were implanted into the cranium defects in rats for 4 or 8 weeks, better cell infiltration was observed in these scaffolds than in unwashed ones. The result demonstrated that washed PCL/PEG/ATP scaffold facilitated the differentiation of MSCs into osteoblasts compared with PCL scaffold, as proved by the increased expression of osteogenic key genes as well as Smad1, Smad4, and Smad5. Furthermore, in vivo studies demonstrated that using the ATP-doped electrospun PCL scaffold can improve the bone regeneration of rat cranium defects. Particularly, the PCL/ATP-30% scaffold has the best effect compared to the other scaffolds. The enhanced osteogenesis and bone repair were related to the PCL/ATP activated BMP/Smad signaling pathway.

The role of lithium in the osteogenic bioactivity of clay nanoparticles

LAPONITE® clay nanoparticles are known to exert osteogenic effects on human bone marrow stromal cells (HBMSCs), most characteristically, an upregulation in alkaline phosphatase activity and increased calcium deposition. The specific properties of LAPONITE® that impart its bioactivity are not known. In this study the role of lithium, a LAPONITE® degradation product, was investigated through the use of lithium salts and lithium modified LAPONITE® formulations. In contrast to intact particles, lithium ions applied at concentrations equivalent to that present in LAPONITE®, failed to induce any significant increase in alkaline phosphatase (ALP) activity. Furthermore, no significant differences were observed in ALP activity with modified clay structures and the positive effect on osteogenic gene expression did not correlate with the lithium content of modified clays. These results suggest that other properties of LAPONITE® nanoparticles, and not their lithium content, are responsible for their bioactivity.

Reinforced Supramolecular Hydrogels from Attapulgite and Cyclodextrin Pseudopolyrotaxane for Sustained Intra-Articular Drug Delivery

Injectable hydrogels for nonsteroidal anti-inflammatory drugs' (NSAIDs) delivery to minimize the side effects of NSAIDs and achieve long-term sustained release at the targeted site of synovial joint are attractive for osteoarthritis therapy, but how to improve its mechanical strength remains a challenge. In this work, a kind of 1D natural clay mineral material, attapulgite (ATP), is introduced to a classical cyclodextrin pseudopolyrotaxane (PPR) system to form a reinforced supramolecular hydrogel for sustained release of diclofenac sodium (DS) due to its rigid, rod-like morphology, and unique structure, which has great potential in tissue regeneration, repair, and engineering. Investigation on the interior morphology and rheological property of the obtained hydrogel points out that the ATP distributed in PPR hydrogel plays a role similar to the "reinforcement in concrete" and exhibits a positive effect on improving the mechanical properties of PPR hydrogel by regulating their interior morphology from a randomly distributed style to the well-ordered porous frame structure. The hybrid hydrogels demonstrate good shear-thinning and thixotropic properties, excellent biocompability, and sustained release behavior both in vitro and in vivo. Furthermore, preliminary in vivo treatment in an acute inflammatory rat model reveals that the ATP hybrid hydrogels present sustained anti-inflammatory effect.

Correlation between Elemental Composition/Mobility and Skin Cell Proliferation of Fibrous Nanoclay/Spring Water Hydrogels

Inorganic hydrogels formulated with spring waters and clay minerals are used to treat musculoskeletal disorders and skin affections. Their underlying mechanism of action for skin disorders is not clear, although it is usually ascribed to the chemical composition of the formulation. The aim of this study was to assess the composition and in vitro release of elements with potential wound healing effects from hydrogels prepared with two nanoclays and natural spring water. In vitro Franz cell studies were used and the element concentration was measured by inductively coupled plasma techniques. Biocompatibility studies were used to evaluate the potential toxicity of the formulation against fibroblasts. The studied hydrogels released elements with known therapeutic interest in wound healing. The released ratios of some elements, such as Mg:Ca or Zn:Ca, played a significant role in the final therapeutic activity of the formulation. In particular, the proliferative activity of fibroblasts was ascribed to the release of Mn and the Zn:Ca ratio. Moreover, the importance of formulative studies is highlighted, since it is the optimal combination of the correct ingredients that makes a formulation effective.

Effect of Attapulgite-Doped Electrospun Fibrous PLGA Scaffold on Pro-Osteogenesis and Barrier Function in the Application of Guided Bone Regeneration

PURPOSE

Guided bone regeneration (GBR) therapy, which is a widely used technique in clinical practice and is effective in improving the repair of alveolar bone defects or bone mass deficiency regeneration, requires the use of membrane materials with good biocompatibility, barrier function, rigidity matching the space maintenance ability, economic benefits and excellent clinical applicability. The aim of this study was to develop an electrospun attapulgite (ATT)-doped poly (lactic-co-glycolic acid) (PLGA) scaffold (PLGA/ATT scaffold) as a novel material for GBR applications.

METHODS AND RESULTS

Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to determine the morphology and the crystalline structure of the PLGA/ATT scaffolds, respectively. Porosity and contact-angle measurements were also carried out to further characterize the physical properties of the PLGA/ATT scaffolds. The results of in vitro studies showed that bone marrow mesenchymal stem cells (BMSCs) attached more readily to and spread better over the PLGA/ATT scaffolds than the Bio-Gide membrane. Furthermore, in the in vitro osteoinductive experiments with BMSCs, the PLGA/ATT scaffolds were found to enhance the activity of alkaline phosphatase (ALP), promote the formation of mineralized bone nodules, and up-regulate the expression of several osteogenic markers-namely, runt-related transcription factor 2, alkaline phosphatase, osteopontin, and osteocalcin-which are similar to the effects of the Bio-Gide membrane. Further, in in vivo studies, the results of sequential fluorescent labeling, micro-computed tomography, and histological analysis suggest that using the PLGA/ATT scaffolds for repairing V-shaped buccal dehiscence on a dog's tooth root improved bone regeneration, which is not only similar to the result obtained using the Bio-Gide membrane but also much better than that obtained using PLGA scaffolds and the negative control.

CONCLUSION

To achieve satisfactory therapeutic results and to lower the cost of GBR treatment, this study provided a promising alternative material of bio-degradable membrane in clinical treatment.

Collagen, polycaprolactone and attapulgite composite scaffolds for in vivo bone repair in rabbit models

Although numerous materials have been explored as bone scaffolds, many of them are limited by their low osteoconductivity and high biodegradability. Therefore, new materials are desired to induce bone cell proliferation and facilitate bone formation. Attapulgite (ATP) is a hydrated silicate that exists in nature as a fibrillar clay mineral and is well known for its large specific surface area, high viscosity, and high absorption capacity, and therefore has the potential to be a new type of bone repair material due to its unique physicochemical properties. In this study, composite scaffolds composed of collagen/polycaprolactone/attapulgite (CPA) or collagen/polycaprolactone (CP) were fabricated through a salt-leaching method. The morphology, composition, microstructure, physical, and mechanical characteristics of the CPA and CP scaffolds were assessed. Cells from the mouse multipotent mesenchymal precursor cell line (D1 cells) were cocultured with the scaffolds, and cell adhesion, proliferation, and gene expression on the CPA and CP scaffolds were analyzed. Adult rabbits with radius defects were used to evaluate the performance of these scaffolds in repairing bone defects over 4-12 weeks. The experimental results showed that the cells demonstrated excellent attachment ability on the CPA scaffolds, as well as remarkable upregulation of the levels of osteoblastic markers such as Runx2, Osterix, collagen 1, osteopontin, and osteocalcin. Furthermore, results from radiography, micro-computed tomography, histological and immunohistochemical analysis demonstrated that abundant new bones were formed on the CPA scaffolds. Ultimately, these results demonstrated that CPA composite scaffolds show excellent potential in bone tissue engineering applications, with the capacity to be used as effective bone regeneration and repair scaffolds in clinical applications.

Wound Healing Activity of Nanoclay/Spring Water Hydrogels

BACKGROUND

hydrogels prepared with natural inorganic excipients and spring waters are commonly used in medical hydrology. Design of these clay-based formulations continues to be a field scarcely addressed. Safety and wound healing properties of different fibrous nanoclay/spring water hydrogels were addressed.

METHODS

in vitro biocompatibility, by means of MTT assay, and wound healing properties were studied. Confocal Laser Scanning Microscopy was used to study the morphology of fibroblasts during the wound healing process.

RESULTS

all the ingredients demonstrated to be biocompatible towards fibroblasts. Particularly, the formulation of nanoclays as hydrogels improved biocompatibility with respect to powder samples at the same concentration. Spring waters and hydrogels were even able to promote in vitro fibroblasts motility and, therefore, accelerate wound healing with respect to the control.

CONCLUSION

fibrous nanoclay/spring water hydrogels proved to be skin-biocompatible and to possess a high potential as wound healing formulations. Moreover, these results open new prospects for these ingredients to be used in new therapeutic or cosmetic formulations.

Natural Inorganic Ingredients in Wound Healing

Background:

One of the major clinical challenges is to achieve a rapid and efficient treatment of complex chronic wounds. Nowadays, most wound dressings currently available are unable to find a solution the challenges of resistance to bacterial infection, protein adsorption and increased levels of exudates. Natural inorganic ingredients (clay minerals, metal cations, zeolites, etc) could be the key to solve the problem satisfactorily. Some of these materials have shown biocompatibility and ability to enhance cell adhesion, proliferation and cellular differentiation and uptake. Besides, some natural inorganic ingredients effectively retain drugs, allowing the design of drug delivery matrices.

Objective:

possibilities of natural inorganic ingredients in wound healing treatments have been reviewed, the following sections have been included: 1. Introduction 2. Functions of Inorganic Ingredients in wound healing 2.1. Antimicrobial effects 2.2. Hemostatic effects 3. Clay minerals for wound healing 3.1. Clay minerals 3.2. Clay mineral semisolid formulations 3.3. Clay/polymer composites and nanocomposites 3.4. Clay minerals in wound dressings 4. Other inorganic materials for wound healing 4.1. Zeolites 4.2. Silica and other silicates 4.3. Other minerals 4.4. Transition metals 5. Conclusion

Conclusion:

inorganic ingredients possess useful features in the development of chronic wounds advanced treatments. They improve physical (mechanical resistance and water vapor transmission), chemical (release of drugs, hemostasis and/or adsorption of exudates and moisture) and biological (antimicrobial effects and improvement of healing) properties of wound dressings. In summary, inorganic ingredients have proved to be a promising and easily accessible products in the treatment of wounds and, more importantly, chronic wounds.

Blood interactions with nano- and microfibers: Recent advances, challenges and applications in nano- and microfibrous hemostatic agents

Nanofibrous materials find a wide range of applications, such as vascular grafts, tissue-engineered scaffolds, or drug delivery systems. This phenomenon can be attributed to almost arbitrary biomaterial modification opportunities created by a multitude of polymers used to form nanofibers, as well as by surface functionalization methods. Among these applications, the hemostatic activity of nanofibrous materials is gaining more and more interest in biomedical research. It is therefore crucial to find both materials and nanofiber structural properties that affect organism responses. The present review critically analyzes the response of blood elements to natural and synthetic polymers, and their blends and composites. Also assessed in this review is the incorporation of pro-coagulative substances or drugs that can decrease bleeding time. The review also discusses the main animal models that were used to assess hemostatic agent safety and effectiveness. STATEMENT OF SIGNIFICANCE: The paper contains an in-depth review of the most representative studies recently published in the topic of nanofibrous hemostatic agents. The topic evolved from analysis of pristine polymeric nanofibers to multifunctional biomaterials. Furthermore, this study is important because it helps clarify the use of specific blood-biomaterial analysis techniques with emphasis on protein adsorption, thrombogenicity and blood coagulation. The paper should be of interest to the readers of Acta biomaterialia who are curious about the strategies and materials used for the development of multifunctional polymer nanofibers for novel blood-contacting applications.

Polycaprolactone-chitosan nanofibers influence cell morphology to induce early osteogenic differentiation

Osteogenic differentiation is highly correlated with cell morphology. Morphological changes are a stimulus as well as a consequence of the differentiation process. Besides, geometrical, biochemical and mechanical properties of a substrate can modulate cell adhesion and morphology. Therefore, in the current study, nanofibrous substrate properties were used to implement necessary changes in cell morphology which induced osteogenic differentiation without biological supplements. A polycaprolactone-chitosan nanofiber substrate had been fabricated with an average diameter of ∼75 nm and an appropriate ratio of polymers that balances surface biocompatibility as well as mechanical strength. DSC and wide-angle XRD analysis revealed miscibility between polymers; whereas a degradation study confirmed the structural integrity of nanofibers. Nanofibers did not cause any cytotoxicity to MC3T3-E1 cells as confirmed by Live/Dead® staining. Morphological studies by SEM and confocal microscopy showed significant changes in terms of cell shape, area, compactness, aspect ratio and nucleus area in cells grown on nanofibers which indicated the osteogenic differentiation inducing potential of nanofibers. This was further confirmed by enhanced mineral deposition and alkaline phosphatase activity up to three weeks. In summary, polycaprolactone-chitosan nanofibers could induce early osteogenic differentiation in MC3T3-E1 pre-osteoblasts without any biological supplements by modulating cell morphology. Moreover, cell morphological features can be used as a predictive and informative approach at the early stages of differentiation experiments.

Incorporation of Human-Platelet-Derived Growth Factor-BB Encapsulated Poly(lactic-co-glycolic acid) Microspheres into 3D CORAGRAF Enhances Osteogenic Differentiation of Mesenchymal Stromal Cells

Tissue engineering aims to generate or facilitate regrowth or healing of damaged tissues by applying a combination of biomaterials, cells, and bioactive signaling molecules. In this regard, growth factors clearly play important roles in regulating cellular fate. However, uncontrolled release of growth factors has been demonstrated to produce severe side effects on the surrounding tissues. In this study, poly(lactic-co-glycolic acid) (PLGA) microspheres (MS) incorporated three-dimensional (3D) CORAGRAF scaffolds were engineered to achieve controlled release of platelet-derived growth factor-BB (PDGF-BB) for the differentiation of stem cells within the 3D polymer network. Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, and microtomography were applied to characterize the fabricated scaffolds. In vitro study revealed that the CORAGRAF-PLGA-PDGF-BB scaffold system enhanced the release of PDGF-BB for the regulation of cell behavior. Stromal cell attachment, viability, release of osteogenic differentiation markers such as osteocalcin, and upregulation of osteogenic gene expression exhibited positive response. Overall, the developed scaffold system was noted to support rapid cell expansion and differentiation of stromal cells into osteogenic cells in vitro for bone tissue engineering applications.

Hyaluronic acid-functionalized electrospun PLGA nanofibers embedded in a microfluidic chip for cancer cell capture and culture

Hyaluronic acid-functionalized electrospun PLGA nanofibers embedded in a microfluidic chip are able to effectively capture cancer cells.

A facile approach for the fabrication of nano-attapulgite/poly(vinyl pyrrolidone)/biopolymers core–sheath ultrafine fibrous mats for drug controlled release

Herein, we report a facile method for the fabrication of flurbiprofen axetil (FA)-loaded core–sheath composite ultrafine fibers for drug sustained release.

Stimulating effect of graphene oxide on myogenesis of C2C12 myoblasts on RGD peptide-decorated PLGA nanofiber matrices

BACKGROUND

In the field of biomedical engineering, many studies have focused on the possible applications of graphene and related nanomaterials due to their potential for use as scaffolds, coating materials and delivery carriers. On the other hand, electrospun nanofiber matrices composed of diverse biocompatible polymers have attracted tremendous attention for tissue engineering and regenerative medicine. However, their combination is intriguing and still challenging.

RESULTS

In the present study, we fabricated nanofiber matrices composed of M13 bacteriophage with RGD peptide displayed on its surface (RGD-M13 phage) and poly(lactic-co-glycolic acid, PLGA) and characterized their physicochemical properties. In addition, the effect of graphene oxide (GO) on the cellular behaviors of C2C12 myoblasts, which were cultured on PLGA decorated with RGD-M13 phage (RGD/PLGA) nanofiber matrices, was investigated. Our results revealed that the RGD/PLGA nanofiber matrices have suitable physicochemical properties as a tissue engineering scaffold and the growth of C2C12 myoblasts were significantly enhanced on the matrices. Moreover, the myogenic differentiation of C2C12 myoblasts was substantially stimulated when they were cultured on the RGD/PLGA matrices in the presence of GO.

CONCLUSION

In conclusion, these findings propose that the combination of RGD/PLGA nanofiber matrices and GO can be used as a promising strategy for skeletal tissue engineering and regeneration.