Multifunctional Nanoparticles with Superparamagnetic Mn(II) Ferrite and Luminescent Gold Nanoclusters for Multimodal Imaging

Gold nanoclusters (AuNCs) with fluorescence in the Near Infrared (NIR) by both one- and two-photon electronic excitation were incorporated in mesoporous silica nanoparticles (MSNs) using a novel one-pot synthesis procedure where the condensation polymerization of alkoxysilane monomers in the presence of the AuNCs and a surfactant produced hybrid MSNs of 49 nm diameter. This method was further developed to prepare 30 nm diameter nanocomposite particles with simultaneous NIR fluorescence and superparamagnetic properties, with a core composed of superparamagnetic manganese (II) ferrite nanoparticles (MnFe2O4) coated with a thin silica layer, and a shell of mesoporous silica decorated with AuNCs. The nanocomposite particles feature NIR-photoluminescence with 0.6% quantum yield and large Stokes shift (290 nm), and superparamagnetic response at 300 K, with a saturation magnetization of 13.4 emu g-1. The conjugation of NIR photoluminescence and superparamagnetic properties in the biocompatible nanocomposite has high potential for application in multimodal bioimaging.

Palladium Nanoparticles on Chitosan-Coated Superparamagnetic Manganese Ferrite: A Biocompatible Heterogeneous Catalyst for Nitroarene Reduction and Allyl Carbamate Deprotection

Although metallic nanocatalysts such as palladium nanoparticles (Pd NPs) are known to possess higher catalytic activity due to their large surface-to-volume ratio, however, in nanosize greatly reducing their activity due to aggregation. To overcome this challenge, superparamagnetic chitosan-coated manganese ferrite was successfully prepared and used as a support for the immobilization of palladium nanoparticles to overcome the above-mentioned challenge. The Pd-Chit@MnFe₂O₄ catalyst exhibited high catalytic activity in 4-nitrophenol and 4-nitroaniline reductions, with respective turnover frequencies of 357.1 min^-1 and 571.4 min^-1, respectively. The catalyst can also be recovered easily by magnetic separation after each reaction. Additionally, the Pd-Chit@MnFe₂O₄ catalyst performed well in the reductive deprotection of allyl carbamate. Coating the catalyst with chitosan reduced the Pd leaching and its cytotoxicity. Therefore, the catalytic activity of Pd-Chit@MnFe₂O₄ was proven to be unrestricted in biology conditions.

Polythiolactone-Decorated Silica Particles: A Versatile Approach for Surface Functionalization, Catalysis and Encapsulation

The surface chemistry of colloidal silica has tremendous effects on its properties and applications. Commonly the design of silica particles is based on their de novo synthesis followed by surface functionalization leading to tailormade properties for a specific purpose. Here, the design of robust "precursor" polymer-decorated silica nano- and microparticles is demonstrated, which allows for easy post-modification by polymer embedded thiolactone chemistry. To obtain this organic-inorganic hybrid material, silica particles (SiO2 P) were functionalized via surface-initiated atom transfer radical polymerization (SI-ATRP) with poly(2-hydroxyethyl acrylate) (PHEA)-poly(thiolactone acrylamide (PThlAm) co-polymer brushes. Exploiting the versatility of thiolactone post-modification, a system was developed that could be used in three exemplary applications: 1) the straightforward molecular post-functionalization to tune the surface polarity, and therefore the dispersibility in various solvents; 2) the immobilization of metal nanoparticles into the polymer brushes via the in situ formation of free thiols that preserved catalytic activity in a model reaction; 3) the formation of redox-responsive, permeable polymer capsules by crosslinking the thiolactone moieties with cystamine dihydrochloride (CDH) followed by dissolution of the silica core.

The synthesis of 3D graphene/Au composites via γ-ray irradiation and their use for catalytic reduction of 4-nitrophenol

Graphene oxide (GO) and gold ions (Au³⁺) can be simultaneously reduced and self-assembled into a three-dimensional (3D) graphene/Au composite (GA/Au) porous structure at room temperature via one-step γ-ray irradiation. The microstructure of GA/Au composites were observed under different magnifications and the pores were observed to be uniform 3D porous structure. In addition, Au nanoparticles were homogeneously attached to graphene sheets and had a typical diameter of 6 nm. These GA/Au composites were analyzed and characterized by x-ray diffraction analysis, x-ray photoelectron spectroscopy, and thermal gravity analysis. Due to synergistic catalysis between graphene and Au nanoparticles, GA/Au composites catalyzed 4-nitrophenol with excellent catalytic performance, even at concentrations up to 6.48 × 10^-3 M. When the concentration of 4-nitrophenol was 2.16 × 10^-3 M and 4.22 × 10^-3 M, the first-order kinetic constants were 2.00 and 1.43 min^-1, respectively.

Using BiVO4/CuO-Based Photoelectrocatalyzer for 4-Nitrophenol Degradation

The present work reports the degradation of 4-nitrophenol using BiVO₄/CuO hybrid material synthesized by the precipitation of BiVO₄ in the presence of CuO. Morphological and structural characterizations were performed using X-ray diffraction and scanning electronic microscopy coupled to energy dispersive X-ray spectroscopy. Through the calculation of the Kubelka–Munk function applied to diffuse reflectance spectrophotometry data, the hybrid material presented absorption edge of 1.85 eV. The formation of p-n heterojunction between BiVO₄ and CuO renders the hybrid material suitable for the construction of a photoanode employed in hydroxyl radical generation. UV–vis spectrophotometry and high-performance liquid chromatography experiments were performed in order to monitor the degradation of 4-nitrophenol and the formation of secondary products. Additional information regarding the hybrid material was obtained through ion chromatography and total organic carbon analyses. The application of BiVO₄/CuO-based photocatalyzer led to a 50.2% decrease in total organic carbon after the degradation of 4-nitrophenol. Based on the results obtained in the study, BiVO₄/CuO has proved to be a promising material suitable for the removal of recalcitrant compounds in water treatment plants.

Palladium Oxide Nanoparticles: Preparation, Characterization and Catalytic Activity Evaluation

Stable palladium oxide nanoparticles were prepared in aqueous suspension with a very simple procedure, by dissolving palladium nitrate in water at a concentration around 10−4 M. UV-visible absorption spectroscopy was adopted to follow the formation of these nanoparticles, which were characterized by TEM microscopy, along with XRD, XPS and Raman measurements. DFT calculations allowed to interpret the Raman data and to clarify the species present at the surface of the nanoparticles. The catalytic activity of the latter was evaluated by monitoring the reduction of p-nitrophenol to p-aminophenol. This investigation paves the way to the use of these colloidal nanoparticles in processes of heterogeneous catalysis, in particular those concerning the catalytic degradation of aromatic derivatives that represent a serious danger for the environment as pollutants, as in the case of p-nitrophenol.

Synthesis of CoFe2O4/C nano-catalyst with excellent performance by molten salt method and its application in 4-nitrophenol reduction

CoFe₂O₄/C nano-sheets (NSs) have been synthesized by a facile molten salt method using cheap potassium fulvate as carbon source and sodium chloride as template. The morphology, crystallinity and composition of the materials were analyzed by TEM, XRD and XPS. The study on the catalytic performance of 4-nitrophenol (4-NP) shows that CoFe₂O₄/C-600 nano-catalyst has the highest catalytic activity and the corresponding apparent constant is 1.91 min^-1, this result is higher than that reported in most literatures. Catalytic kinetics of 4-NP reduction was studied in this article, and activation energy (E_a) was calculated to be 14.31 kJ mol^-1. The catalyst also shows good cycle performance and stability. This convenient method provides a reference for the synthesis of MFe₂O₄/C and other nano-metal oxides/C nanocomposite catalysts.

Immobilization of functional nano-objects in living engineered bacterial biofilms for catalytic applications

Nanoscale objects feature very large surface-area-to-volume ratios and are now understood as powerful tools for catalysis, but their nature as nanomaterials brings challenges including toxicity and nanomaterial pollution. Immobilization is considered a feasible strategy for addressing these limitations. Here, as a proof-of-concept for the immobilization of nanoscale catalysts in the extracellular matrix of bacterial biofilms, we genetically engineered amyloid monomers of the Escherichia coli curli nanofiber system that are secreted and can self-assemble and anchor nano-objects in a spatially precise manner. We demonstrated three scalable, tunable and reusable catalysis systems: biofilm-anchored gold nanoparticles to reduce nitro aromatic compounds such as the pollutant p-nitrophenol, biofilm-anchored hybrid Cd_0.9Zn_0.1S quantum dots and gold nanoparticles to degrade organic dyes and biofilm-anchored CdSeS@ZnS quantum dots in a semi-artificial photosynthesis system for hydrogen production. Our work demonstrates how the ability of biofilms to grow in scalable and complex spatial arrangements can be exploited for catalytic applications and clearly illustrates the design utility of segregating high-energy nano-objects from injury-prone cellular components by engineering anchoring points in an extracellular matrix.

Ruthenium Supported on Ionically Cross-linked Chitosan-Carrageenan Hybrid MnFe2O4 Catalysts for 4-Nitrophenol Reduction

Herein, we report a facile procedure to synthesize the hybrid magnetic catalyst (Ru@CS-CR@Mn) using ruthenium (Ru) supported on ionically cross-linked chitosan-carrageenan (CS-CR) and manganese ferrite (MnFe2O4) nanoparticles with excellent catalytic activity. The ionic gelation of CS-CR is acting as a protecting layer to promote the encapsulation of MnFe2O4 and Ru nanoparticles by electrostatic interactions. The presence of an active metal and a CS-CR layer on the as-prepared Ru@CS-CR@Mn catalyst was well determined by a series of physicochemical analyses. Subsequently, the catalytic performances of the Ru@CS-CR@Mn catalysts were further examined in the 4-nitrophenol (4-NP) reduction reaction in the presence of sodium borohydride (reducing agent) at ambient temperature. The Ru@CS-CR@Mn catalyst performed excellent catalytic activity in the 4-NP reduction, with a turnover frequency (TOF) values of 925 h−1 and rate constant (k) of 0.078 s−1. It is worth to mentioning that the Ru@CS-CR@Mn catalyst can be recycled and reused up to at least ten consecutive cycles in the 4-NP reduction with consistency in catalytic performance. The Ru@CS-CR@Mn catalyst is particularly attractive as a catalyst due to its superior catalytic activity and superparamagnetic properties for easy separation. We foresee this catalyst having high potential to be extended in a wide range of chemistry applications.

Recyclable Au/SiO2-Shell/Fe3O4-Core Catalyst for the Reduction of Nitro Aromatic Compounds in Aqueous Solution

Highly stable gold nanoparticles immobilized on the surface of amine-functionalized nanocomposite microspheres possessing a magnetite (Fe₃O₄) nanoparticle core and a silica (SiO₂) shell (Au/SiO₂-shell/Fe₃O₄-core) were prepared. These gold nanocomposite catalysts were tested for 4-nitrophenol (4-NP) and 2-nitroaniline (2-NA) reduction in aqueous solution in the temperature range 293-323 K and in the presence of aqueous NaBH₄ reducing agent. The magnetically recyclable gold catalyst showed high stability (∼3 months), efficient recyclability (up to 10 cycles), and high activity (∼100% conversion within 225 s, ∼700 ppm 4-NP or 2-NA). The pseudo-first-order apparent reaction rate constants (k) of 4-NP and 2-NA reduction were 7.5 × 10^-3 and 4.1 × 10^-3 s^-1, respectively, and with an apparent catalytic activity of 4.48 × 10^-8 kmol/(m³ s).

Surfactant-free synthesis of hollow mesoporous carbon spheres and their encapsulated Au derivatives using biopolymeric chitosan

To realize surfactant-free synthesis of biomass-derived hollow mesoporous carbon spheres and their derivatives, choice of synthetic methodology and carbon precursor is crucial. Herein, a brand-new hollow mesoporous carbon sphere (HMCS) is first synthesized from 8-quinolinol modified chitosan via an in situ stöber templating approach without surfactant followed by pyrolysis and alkali washing. The resultant HMCS is uniform, and shows a cavity size of 417 nm, a shell thickness of 5 nm, and a narrow mesopore size distribution centered at 3.9 nm. The HMCS is then upgraded by encapsulation of a single Au nanocrystal (NC) into the void of HMCS to form a yolk-shell architecture, YS-Au@HMCS. Its cavity size and shell thickness are decreased to 187 and 3 nm, while the mesopore size is increased to 4.3 nm, the surface area (215 m² g^-1) and mesoporosity (74.7%) are triple and twice that of HMCS, respectively, just by halving the delay time of carbon source addition. Owing to the unique hollow interiors and mesopores, as well as their synergism with the encapsulated Au NCs, the elaborately fabricated YS-Au@HMCS exhibits appealing catalytic performances towards the deposal of sewage. It delivers a large activity factor of 34.32, 13.29 and 0.05 s^-1 g^-1 in the reduction of 4-nitrophenol and methylene blue using sodium borohydride, and in the photodegradation of methylene blue under visible light irradiation, respectively. These advances shed new light on the synthesis of hollow mesoporous carbon spheres and the designed synthesis of functional carbon materials with versatile applications.

Gold nanocatalysts supported on carbon for electrocatalytic oxidation of organic molecules including guanines in DNA

Gold (Au) is chemically stable and resistant to oxidation. Although bulk Au is catalytically inert, nanostructured Au exhibits unique size-dependent catalytic activity. When Au nanocatalysts are supported on conductive carbon (denoted as Au@C), Au@C becomes promising for a wide range of electrochemical reactions such as electrooxidation of alcohols and electroreduction of carbon dioxide. In this mini-review, we summarize Au@C nanocatalysts with specific attention on the most recent achievements including the findings in our own laboratories, and show that Au nanoclusters (AuNCs, <2 nm) on nitrided carbon are excellent electrocatalysts for the oxidation of organic molecules including guanines in DNA. The state-of-the-art synthesis and characterization of these nanomaterials are also documented. Synergistic interactions among Au-containing multicomponents on carbon supports and their applications in electrocatalysis are discussed as well. Finally, challenges and future outlook for these emerging and promising nanomaterials are envisaged.

A simple route to diverse noble metal-decorated iron oxide nanoparticles for catalysis

Developing facile synthetic routes to multifunctional nanoparticles combining the magnetic properties of iron oxides with the optical and catalytic utility of noble metal particles remains an important goal in realizing the potential of hybrid nanomaterials. To this end, we have developed a single route to noble metal-decorated magnetic nanoparticles (Fe3O4@SiO2-M; M = Au, Pd, Ag, and PtAg) and characterized them by HRTEM and STEM/EDX imaging to reveal their nanometer size (16 nm Fe3O4 and 1-5 nm M seeds) and uniformity. This represents one of the few examples of genuine multifunctional particles on the nanoscale. We show that these hybrid structures have excellent catalytic activity for the reduction of 4-nitrophenol (knorm = 2 × 10(7) s(-1) mol(Pd)(-1); 5 × 10(6) s(-1) mol(Au)(-1); 5 × 10(5) s(-1) mol(PtAg)(-1); 7 × 10(5) s(-1) mol(Ag)(-1)). These rates are the highest reported for nano-sized comparables, and are competitive with mesoparticles of similar composition. Due to their magnetic response, the particles are also suitable for magnetic recovery and maintain >99% conversion for at least four cycles. Using this synthetic route, Fe3O4@SiO2-M particles show great promise for further development as a precursor to complicated anisotropic materials or for applications ranging from nanocatalysis to biomedical sensing.

NiCo nanotubes plated on Pd seeds as a designed magnetically recollectable catalyst with high noble metal utilisation

The tailored structure of a bifunctional, semi-homogeneous NiCo-nanotube catalyst system with embedded Pd nanoparticles, is synthesised by electroless plating.

Gold nanoparticle modified magnetic fibrous silica microspheres as a highly efficient and recyclable catalyst for the reduction of 4-nitrophenol

Au nanoparticles were immobilized on magnetic fibrous silica microspheres as highly active and recyclable nanocatalysts for the catalytic reduction of 4-nitrophenol to 4-aminophenol.

Rapid template-free synthesis of an air-stable hierarchical copper nanoassembly and its use as a reusable catalyst for 4-nitrophenol reduction

A hierarchical copper nanoassembly was synthesized by solvothermal treatment at 150 °C for 2 h in the absence of any templating agents, and exhibited excellent air-stability, antioxidative properties and catalytic reduction of 4-nitrophenol.

Synthesis and characterization of gold complexes with pyridine-based SNS ligands and as homogeneous catalysts for reduction of 4-nitrophenol

Three gold complexes efficiently catalyze 4-nitrophenol reduction to 4-nitroaniline in the presence of NaBH₄ under homogeneous conditions in water.

Reduction of 4-nitrophenol to 4-aminophenol using a novel Pd@NixB–SiO2/RGO nanocomposite: enhanced hydrogen spillover and high catalytic performance

In the present study, we report a facile synthesis of novel Pd–NixB–SiO₂/RGO (Pd@NSG) nanocomposite and discuss its enhanced H₂ spillover mechanism and high catalytic performance towards reduction of 4-nitrophenol (4-NP) to 4-aminopehol (4-AP).

Polyvinylpyrrolidone (PVP) in nanoparticle synthesis

The versatile role of PVP in nanoparticle synthesis is discussed in this Perspective article.