Carbon-Based Nanomaterials for Catalytic Wastewater Treatment: A Review

Carbon-based nanomaterials (CBM) have shown great potential for various environmental applications because of their physical and chemical properties. The unique hybridization properties of CBMs allow for the tailored manipulation of their structures and morphologies. However, owing to poor solar light absorption, and the rapid recombination of photogenerated electron-hole pairs, pristine carbon materials typically have unsatisfactory photocatalytic performances and practical applications. The main challenge in this field is the design of economical, environmentally friendly, and effective photocatalysts. Combining carbonaceous materials with carbonaceous semiconductors of different structures results in unique properties in carbon-based catalysts, which offers a promising approach to achieving efficient application. Here, we review the contribution of CBMs with different dimensions, to the catalytic removal of organic pollutants from wastewater by catalyzing the Fenton reaction and photocatalytic processes. This review, therefore, aims to provide an appropriate direction for empowering improvements in ongoing research work, which will boost future applications and contribute to overcoming the existing limitations in this field.

Removal of bisphenol A and methylene blue through persulfate activation by calcinated α-MnO2 nanorods: effect of ultrasonic assistance and toxicity assessment

This work investigates the efficacy of α-MnO₂ nanorods for persulfate-mediated degradation of bisphenol A (BPA) and methylene blue (MB), in silent and ultrasonic-assisted systems. The conversion of α-MnO₂ nanoparticle flakes to nanorods occurs upon calcination at a temperature of 400 °C for 3 h under the ramping conditions. The comparative characterization of nanomaterials pre- and post-calcination reveals better physical, chemical, and thermal properties of α-MnO₂ nanorods. The impact of various operational parameters such as pH, dosage of nanorods, persulfate dose, selected contaminant concentration, ultrasound frequency and power, scavengers, and landfill leachate medium on the degradation of pollutants is also assessed. The ultrasonic assistance yields higher removal for both BPA and MB than the silent system. This may be attributed to the generation of more radicals as ultrasound activates persulfate. This can be due to acoustic cavitation, which leads to better solute dissociation and excited state. The results obtained through scavenger tests reveal that both OH^• and SO₄^•- can contribute to degradation, but the role of SO₄^•- is found dominant. Significant removal of BPA and MB ((BPA)_silent, 87.12%; (MB)_silent, 96.54%; (BPA)_ultrasonic, 88.75%; (MB)_ultrasonic, 93.86%)) is observed in landfill leachate medium. The degradation pathway for pollutants is also proposed. The toxicity of pollutants and their degradation intermediates are evaluated using Ecological Structure Activity Relationships (ECOSAR) program. The results indicate reduced toxicity of BPA intermediates, while most MB degradation intermediates show higher toxicity. Therefore, it can be affirmed that removing pollutants does not ensure a completely non-toxic process. However, the study proposes a comprehensive toxicity evaluation and eliminating toxic intermediates for completely harmless wastewater treatment.

Mechanistic insights into efficient peroxymonosulfate activation by NiCo layered double hydroxides

The efficient removal of organic refractory pollutants such as dyes and antibiotics in wastewater is crucial for protecting the environment and human health. In this work, a NiCo-layered double hydroxide (NiCo-LDH) with a uniform microspherical, hierarchical structure and a high surface area was successfully synthesized as an effective peroxymonosulfate (PMS) activator for the degradation of various organic dyes and antibiotics. The influence of various parameters on the catalytic activity of the NiCo-LDH was determined. Radical scavenger studies unveiled the major reactive oxygen species (ROSs) generated in the NiCo-LDH/PSM system to be ¹O₂, SO₄^•-, and O₂^•-. Ex-situ X-ray photoelectron spectroscopy (XPS) analysis uncovered the role of Co sites and oxygen vacancy as active sites and revealed the reversible redox properties of NiCo-LDH based on Co²⁺/Co³⁺ cycles. The activation mechanism and Rhodamine B (RhB) degradation pathways were experimentally studied and proposed. The NiCo-LDH is highly versatile, reusable and stable as shown by post-catalysis characterizations. This work shows the excellent catalysis performances and provides insights into the activation mechanism of PMS by NiCo-LDH for organic pollutant remediation.

Peroxymonosulfate activation through ferromagnetic bimetallic spinel sulfide composite (Fe3O4/NiCo2S4) for organic pollutant degradation

Spinel sulfides are a good candidate as heterogeneous catalysts for wastewater treatment through peroxymonosulfate (PMS) activation. In this paper, magnetic Fe₃O₄/NiCo₂S₄ composite was successfully synthesized by hydrothermal method. Catalyst screening displayed that the composite catalyst with a Fe₃O₄:NiCo₂S₄ molar ratio of 1:3 (i.e.,0.33-Fe₃O₄/NiCo₂S₄) is the most optimal. The results showed that 0.33-Fe₃O₄/NiCo₂S₄ composite catalyst had superior catalytic activity, achieving 99.8%,65.1% and 40.7% of RhB, COD and TOC removals within 30 min with 180 m g/L PMS and 75 mg/L catalyst. We proposed a potential catalytic mechanism of PMS activation by Fe₃O₄/NiCo₂S₄ in two aspects. On the one hand, sulfur species such as S^2- and S₂^2- enhance the Co³⁺/Co²⁺, Ni³⁺/Ni²⁺ and Fe³⁺/Fe²⁺ cycles on Fe₃O₄/NiCo₂S₄ surface. On the other hand, there is the synergistic effect of Co³⁺/Co²⁺, Ni³⁺/Ni²⁺ and Fe³⁺/Fe²⁺ cycles in activating PMS. Overall, owing to its excellent catalytic activity, reusability, and easy recovery, Fe₃O₄/NiCo₂S₄ is a potentially useful catalyst for remediation of contaminated water.

Electronic structure modulation of multi-walled carbon nanotubes using azo dye for inducing non-radical reaction: Effect of graphitic nitrogen and structural defect

Multiwalled carbon nanotube (MWCNT) have a great potential for advanced oxidation process as a metal free catalyst. However, there catalytic activity is very low and needs to be appropriately tuned. Herein, we demonstrate a novel synthesis method for tuning the defect and surface functionality of MWCNT using azo dyes and the catalytic performance was tested for the degradation of different organic contaminates using PMS as an oxidant. The content, type of heteroatom functional groups, and the defect parameters were optimized by varying the pH and concentration of the organic dye. The quenching effect showed that singlet oxygen (¹O₂) is the primary reactive species generated by graphitic nitrogen, which can be boosted by the degree of graphitic structure disruption in MWCNT. The Linear sweep voltammetry (LSV) also confirmed that extrinsic doping enhanced the non-radical degradation by increasing the direct charge transfer rate from MB to PMS. Moreover, the designed catalyst showed a fast degradation performance with 35.1 kJ/mol activation energy and achieved the highest dye degradation rate and even surpassed some state-of-the-art metal-based and metal-free catalysts. The effect of inorganic anions study has also confirmed its industrial applicability.

Insights into the correlation between different adsorption/oxidation/catalytic performance and physiochemical characteristics of Fe-Mn oxide-based composites

Fe-Mn oxide-based composites have been widely used in the solidification of heavy metals or the removal of organic pollutants, which can not only show excellent adsorption/oxidation performance, but also show catalytic activity for common oxidants. At present, the correlation between adsorption/oxidation/catalytic performance and physicochemical characteristics of these composites, and the underlying mechanisms are still unclear. Therefore, the main purpose of this review is to disclose the internal relationship between the physicochemical properties of Fe-Mn oxide-based composites and the pollutant removal performance. From the perspective of crystal phase, the basic units of Fe-Mn oxide composites are divided into Fe-Mn binary oxide (FMBO) and spinel MnFe₂O₄, and the two species were discussed separately in most chapters. The selected physicochemical properties mainly include the type of Fe-Mn oxide composites, surface-to-volume ratio, pore volume, pH_pzc, crystal type, surface functional groups. Because the physicochemical properties that determine how effective Fe-Mn oxide material is at removing contaminants may differ as it performs different functions, we discussed the above problems under different application scenarios (adsorption, oxidation, and advanced oxidation process). Additionally, internal factor (Fe/Mn mole ratio) and external factors (pH_ini, co-ions and ionic strength) were analyzed, and several common synthetic strategies of these composites were presented.

Activation of persulfate by LaFe1-xCoxO3 perovskite catalysts for the degradation of phenolics: Effect of synthetic method and metal substitution

The presence of resistant organic pollutants in environmental substrates requires the development and finding of novel decontamination methods. Advanced oxidation processes are among the most effective methods used for degradation of these pollutants through their oxidation and degradation into non-toxic and harmless, for the environment, final products. Ιn this research, a series of perovskites of ABO₃-type, with La and Fe and/or Co in A and B positions respectively, LaFe_1-xCo_xO₃ (x = 0, 0.25, 0.5, 0.75, 1), were synthesized with two different methods, a soft template method using anionic surfactant and by glycine combustion method and studied for their catalytic activity towards the degradation of phenolic compounds, a major class of environmental pollutants, through persulfate activation. The catalytic activity depended both by the B metal ion of perovskites and their ratio as well as by the synthesis method. LaCoO₃ prepared with the anionic surfactant method, showed the highest catalytic activity with a rate constant of 0.024 min^-1. Furthermore, the synthesis method also influenced the stability of perovskites as metal leaching studies showed that perovskites synthesized with the anionic surfactant showed greater stability. Quenching experiments were also used in order to shed light on the catalytic activation mechanism of persulfate for the degradation of phenolics. Overall, the results showed that the synthesis method can significantly affect the catalytic activity of the materials and their stability since the same materials synthesized with different methods show significantly different catalytic properties.

Cobalt-ferrite/Ag-fMWCNT hybrid nanocomposite catalyst for efficient degradation of synthetic organic dyes via peroxymonosulfate activation

The activation of peroxymonosulfate (PMS) by nanocatalysts has shown promise as an effective wastewater treatment protocol. Magnetic CoFe₂O₄/Ag-nanoparticles (NPs) anchored on functionalized multiwalled carbon nanotubes (fMWCNTs), a support material, were synthesized using a one-pot solvothermal method. The surface morphologies and physicochemical properties of the CoFe₂O₄/Ag-fMWCNT hybrid nanocomposite catalyst were investigated by powder X-ray diffraction analysis, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and nitrogen adsorption-desorption isotherms. The activity of the nanocomposite combined with PMS (serving as an activator) toward the degradation of rhodamine B, methylene blue, methyl orange, and methyl red was investigated. The obtained optimal 0.02 g CoFe₂O₄/Ag-fMWCNTs exhibited the highest PMS activation performance, with a removal percentage of 100% for 20 ppm dye concentration at pH 6.5 within 14 min. In addition, the rhodamine B degradation product was investigated by analyzing the intermediate products by liquid chromatography/mass spectrometry (LC-MS). The homogeneous distribution of CoFe₂O₄/Ag NPs on fMWCNTs accelerated PMS activation and enhanced the catalytic degradation of dyes. The effects of the reaction parameters on the dye degradation efficiency were investigated by using different nanocatalysts (fMWCNTs, CoFe₂O₄/fMWCNTs, and CoFe₂O₄/Ag-fMWCNTs) as well as by varying the pH (3-11), dye concentration (10-50 mg/l), catalyst dose (0.002-0.3 g), and PMS dose (0.02-0.1 g). Quenching experiments revealed that sulfate radicals are primarily responsible for rhodamine B degradation. A plausible mechanism for catalytic PMS activation was also proposed. Complete decolorization occurred within the first few minutes of the reaction. Furthermore, the catalytic activity of the CoFe₂O₄/Ag-fMWCNT/PMS hybrid nanocomposite remained stable after five successive cycles. This study verifies the applicability of CoFe₂O₄/Ag-fMWCNTs as an ultrafast catalyst for the complete removal of persistent organic pollutants via PMS activation, revealing their promising application in wastewater treatment.

Amorphous NiSn and FeOOH as bifunctional co-catalysts for oxygen reduction and phenol (water) oxidation over BiVO4 under visible light

Monoclinic BiVO₄ (BiV) has been widely used as a photoanode for water oxidation, but rarely as a photocatalyst for organic oxidation due to slow reaction of O₂. In this work, BiV has been modified with poorly crystallized sFe and sNi, where sFe is FeOOH, and sNi is a mixture of Ni(OH)₂ and polysulfide. Under light, sFe/BiV and sNi/BiV in aqueous solution were more active than BiV, respectively, not only for phenol oxidation but also for O₂ reduction. Importantly, the rate of phenol oxidation obtained for sFe/sNi/BiV was larger than the sum of the rates measured for sFe/BiV and sNi/BiV, by a factor of approximately 1.5. Moreover, on a film electrode, O₂ reduction had a current of sFe/sNi/BiV > sNi/BiV > sFe/BiV > BiV, while water (photo)oxidation had a current of sFe/sNi/BiV > sNi/BiV > sFe/BiV > BiV. A possible mechanism is proposed, involving formation of a reduced sulfur species for O₂ reduction and an oxidized iron species for phenol oxidation. In sFe/sNi/BiV, there is a mutual promotion between the sNi-mediated electron transfer and the sFe-mediated hole transfer. This results in a further improved efficiency of charge separation for O₂ reduction and phenol oxidation.

A Review of Manganese(III) (Oxyhydr)Oxides Use in Advanced Oxidation Processes

The key role of trivalent manganese (Mn(III)) species in promoting sulfate radical-based advanced oxidation processes (SR-AOPs) has recently attracted increasing attention. This review provides a comprehensive summary of Mn(III) (oxyhydr)oxide-based catalysts used to activate peroxymonosulfate (PMS) and peroxydisulfate (PDS) in water. The crystal structures of different Mn(III) (oxyhydr)oxides (such as α-Mn₂O₃, γ-MnOOH, and Mn₃O₄) are first introduced. Then the impact of the catalyst structure and composition on the activation mechanisms are discussed, as well as the effects of solution pH and inorganic ions. In the Mn(III) (oxyhydr)oxide activated SR-AOPs systems, the activation mechanisms of PMS and PDS are different. For example, both radical (such as sulfate and hydroxyl radical) and non-radical (singlet oxygen) were generated by Mn(III) (oxyhydr)oxide activated PMS. In comparison, the activation of PDS by α-Mn₂O₃ and γ-MnOOH preferred to form the singlet oxygen and catalyst surface activated complex to remove the organic pollutants. Finally, research gaps are discussed to suggest future directions in context of applying radical-based advanced oxidation in wastewater treatment processes.

Interface-Promoted Direct Oxidation of p-Arsanilic Acid and Removal of Total Arsenic by the Coupling of Peroxymonosulfate and Mn-Fe-Mixed Oxide

As one of the extensively used feed additives in livestock and poultry breeding, p-arsanilic acid (p-ASA) has become an organoarsenic pollutant with great concern. For the efficient removal of p-ASA from water, the combination of chemical oxidation and adsorption is recognized as a promising process. Herein, hollow/porous Mn-Fe-mixed oxide (MnFeO) nanocubes were synthesized and used in coupling with peroxymonosulfate (PMS) to oxidize p-ASA and remove the total arsenic (As). Under acidic conditions, both p-ASA and total As could be completely removed in the PMS/MnFeO process and the overall performance was substantially better than that of the Mn/Fe monometallic system. More importantly, an interface-promoted direct oxidation mechanism was found in the p-ASA-involved PMS/MnFeO system. Rather than activate PMS to generate reactive oxygen species (i.e., SO₄^·-, ·OH, and ¹O₂), the MnFeO nanocubes first adsorbed p-ASA to form a ligand-oxide interface, which improved the oxidation of the adsorbed p-ASA by PMS and ultimately enhanced the removal of the total As. Such a direct oxidation process achieved selective oxidation of p-ASA and avoidance of severe interference from the commonly present constituents in real water samples. After facile elution with dilute alkali solution, the used MnFeO nanocubes exhibited superior recyclability in the repeated p-ASA removal experiments. Therefore, this work provides a promising approach for efficient abatement of phenylarsenical-caused water pollution based on the PMS/MnFeO oxidation process.

Transformation of iopamidol and atrazine by peroxymonosulfate under catalysis of a composite iron corrosion product (Fe/Fe3O4): Electron transfer, active species and reaction pathways

Cast iron pipes are commonly applied in drinking water distribution systems (DWDSs); peroxymonosulfate (PMS) is a promising alternative for drinking water disinfection; organic micropollutants is still present in drinking water after waterworks' treatment. However, iron corrosion products may affect the reactions between a disinfectant and organic micropollutants. The study investigated the transformation of iopamidol (IPM) and atrazine (ATZ) by PMS under the catalysis of a composite iron corrosion product (Fe/Fe₃O₄). The pseudo-first-order rate constants (k) for the degradation of IPM and ATZ were 1.47 and 1.03 min^-1, respectively. Electron paramagnetic resonance (EPR) experiments indicated that PMS was effectively activated to yield sulfate radical (SO₄^•-) and hydroxyl radical (HO^•), mainly via the reduction by Fe component, dissolved Fe²⁺ and generated Feocta2+. SO₄^•- contributed more than HO^• to the degradation of IPM and ATZ, and the radical yield achieved 0.97 mol/mol. The k values reached maximum with Fe/Fe₃O₄ and PMS doses of 2.5 g L^-1 and 25 mg L^-1, respectively. The optimum mass fraction of Fe₃O₄ in Fe/Fe₃O₄ (MF_mag) and pH were 10% and 7.0, respectively. The k values increased with increasing temperature, while decreased in the presence of water matrix. Most of the iodine released from IPM was oxidized to IO₃^-, and NH₄⁺ was the dominant species of nitrogen released from ATZ. The identification of transformation intermediates showed that the radical chain reactions of IPM was mainly initiated from single electron transfer and radical adduct formation, while those of ATZ was primarily initiated from hydrogen atom abstraction and radical adduct formation.

One-step synthesis of Mn-doped MIL-53(Fe) for synergistically enhanced generation of sulfate radicals towards tetracycline degradation

Herein, Mn-doped MIL-53(Fe) were fabricated via one-pot solvothermal method and used for peroxymonosulfate (PMS) activation towards tetracycline (TC) degradation from aqueous solution. The characterizations of SEM, FTIR and XRD were utilized to reveal the morphology and structure of the materials. The results showed that Mn-MIL-53(Fe)-0.3 displayed the optimal catalytic performance, the removal efficiency of TC could reach 93.2%. Moreover, the catalytic activity of Mn-MIL-53(Fe) towards TC under different initial pH values, co-existing anions (Cl^-,CO₃^2- and SO₄^2-) and humic acid (HA) were investigated. The results of thermodynamic experiment suggested that the catalytic process was endothermic. In addition, integrated with capture experiments results and the characterization results of electron paramagnetic resonance (EPR), which revealed that SO₄^·- and HO^- were the reactive radicals involving in the reaction. More importantly, the possible activation mechanism was discussed in detail based on the X-ray photoelectron spectroscopy results. The active species were generated by the active sites of Fe(II) and Mn(II) on Mn-MIL-53(Fe) effectively activated PMS. Furthermore, the degradation intermediates and possible degradation pathway were investigated by LC-MS. Finally, the catalyst also showed good performance in actual wastewater and demonstrated good recyclability. The Mn-MIL-53(Fe)/PMS system exhibited a promising application prospect for antibiotic-containing waste water treatment.

Performance of chemically synthesized Mn3O4/rGO nanocomposite for electrochemical supercapacitor: a cost-effective high-performance electrode

The manganese oxide graphene oxide (Mn₃O₄/rGO) composite heterojunction with copper oxide is useful for the production of an electrochemical supercapacitor. The graphene oxide and manganese oxide composite have been synthesized by adopting a method of co-precipitation. The composite of Mn₃O₄/rGO was synthesized with different concentrations of Mn₃O₄ and rGO. The structural, morphological, electrochemical and supercapacitive properties of Mn₃O₄/rGO composite have been examined. The electrochemical and supercapacitive properties have been studied with regard to different substrates. The Mn₃O₄/rGO composite was deposited on different substrates such as steel, copper and brass. The CuO/Mn₃O₄/rGO shows relatively better specific capacitance (856 F g^-1) and better stability (82% retention after 2000 cycles) than other substrates used. The present work describes the development of cost-effective and high-performance CuO/Mn₃O₄/rGO-based nanomaterials for supercapacitors. The CuO/Mn₃O₄/rGO composite can be used as a flexible supercapacitor device.

Catalytic activation of peroxymonosulfate with manganese cobaltite nanoparticles for the degradation of organic dyes

In this work, we report the facile hydrothermal synthesis of manganese cobaltite nanoparticles (MnCo₂O_4.5 NPs) which can efficiently activate peroxymonosulfate (PMS) for the generation of sulfate free radicals (SO₄˙⁻) and degradation of organic dyes. The synthesized MnCo₂O_4.5 NPs have a polyhedral morphology with cubic spinel structure, homogeneously distributed Mn, Co, and O elements, and an average size less than 50 nm. As demonstrated, MnCo₂O_4.5 NPs showed the highest catalytic activity among all tested catalysts (MnO₂, CoO) and outperformed other spinel-based catalysts for Methylene Blue (MB) degradation. The MB degradation efficiency reached 100% after 25 min of reaction under initial conditions of 500 mg L⁻¹ Oxone, 20 mg L⁻¹ MnCo₂O_4.5, 20 mg L⁻¹ MB, unadjusted pH, and T = 25 °C. MnCo₂O_4.5 NPs showed a great catalytic activity in a wide pH range (3.5–11), catalyst dose (10–60 mg L⁻¹), Oxone concentration (300–1500 mg L⁻¹), MB concentration (5–40 mg L⁻¹), and temperature (25–55 °C). HCO₃⁻, CO₃²⁻ and particularly Cl⁻ coexisting anions were found to inhibit the catalytic activity of MnCo₂O_4.5 NPs. Radical quenching experiments revealed that sulfate radicals are primarily responsible for MB degradation. A reaction sequence for the catalytic activation of PMS was proposed. The as-prepared MnCo₂O_4.5 NPs could be reused for at least three consecutive cycles with small deterioration in their performance due to low metal leaching. This study suggests a facile route for synthesizing MnCo₂O_4.5 NPs with high catalytic activity for PMS activation and efficient degradation of organic dyes.

Catalytic degradation of organic dyes via manganese cobaltite nanoparticles-activated peroxymonosulfate.

Efficient peroxymonosulfate activation by Zn/Fe metal-organic framework-derived ZnO/Fe3 O4 @carbon spheres for the degradation of Acid Orange 7

ZnO/Fe₃ O₄ @carbon spheres, which synthesized via a calcination process used Zn/Fe metal-organic frameworks (Zn/Fe-MOFs) as a precursor, were studied for the activation of peroxymonosulfate (PMS) for the degradation of Acid Orange 7 (AO7). The ZnO/Fe₃ O₄ @carbon spheres exhibited relatively high catalytic degradation properties for AO7 in an aqueous solution. The AO7 degradation reached 93.6% in 15 min under the conditions: 0.20 g/L ZnO/Fe₃ O₄ @carbon spheres, 1.25 mmol/L PMS, 0.03 mmol/L AO7, and initial pH of 4. Findings revealed that higher ZnO/Fe₃ O₄ @carbon spheres dose and PMS concentration, lower initial AO7 concentration, and acidic pH favored the AO7 degradation to a certain extent. The mechanisms for the activation of PMS by ZnO/Fe₃ O₄ @carbon spheres were proposed based on the results of radical identification tests and structure characterization. Both radical and nonradical pathways contribute to the AO7 degradation in this system. PRACTITIONER POINTS: PMS + ZnO/Fe₃ O₄ @carbon spheres system can effectively catalyze PMS to decompose AO7. Both radical and nonradical pathways contribute to the degradation of AO7 in this system. The acidic condition was favorable for the activation of PMS.

Peroxymonosulfate activation by hydroxylamine-drinking water treatment residuals for the degradation of atrazine

Drinking water treatment residuals (WTRs) have been applied in organic pollutants degradation in water by generating reactive oxygen species from peroxymonosulfate (PMS), however, the slow transformation of Fe(III) to Fe(II) may limit its widespread application. Hydroxylamine (HA) was introduced into the system to enhance the degradation efficiency of atrazine (ATZ) and several key reaction parameters (HA concentration, PMS concentration, pH and temperature) were concerned to study their influence on ATZ degradation. The results revealed that ATZ degradation efficiency was enhanced in the HA/WTRs/PMS system. Effects of some basic inorganic ions (Cl^-, SO₄^2- and NO₃^-) and natural organic matter on ATZ degradation were investigated and results showed that both have an inhibitory effect on ATZ removal. In addition to the reduction role, HA can also react directly with PMS to produce free radicals that helpful for ATZ degradation. Sulfate radical and hydroxyl radicals were generated and sulfate radical was identified as primary radicals in the HA/WTRs/PMS system by alcohol quenching experiments. Moreover, the HA/WTRs/PMS system also showed good performance for ATZ degradation in authentic water like surface water and groundwater. Introduction of hydroxylamine into the system may promote organic pollutant degradation and use of WTRs as an iron source for PMS activation provides new ideas for sludge treatment.

Heterogeneous activation of peroxymonosulfate using Mn-Fe layered double hydroxide: Performance and mechanism for organic pollutant degradation

On account of high oxidation ability of sulfate radical-based advanced oxidation processes (AOPs), the eco-friendly catalysts for peroxymonosulfate (PMS) activation have received considerable attentions. Previous studies mainly focused on Cobalt-based catalyst due to its high activation efficiency, such as Co₃O₄/MnO₂ and FeCo-layered double hydroxide (LDH), whereas Cobalt-based catalyst usually has serious risk to environment. To avoid this risk, MnFe-LDH was primarily synthesized in this research by simple co-precipitation and subsequently utilized as an effective catalyst for peroxymonosulfate (PMS) activation to degrade organic pollutants. The experimental results demonstrated that MnFe-LDH with a lower dosage (0.20 g/L) could efficiently activate PMS to achieve 97.56% removal of target organic pollutants Acid Orange 7 (AO7). The AO7 degradation process followed the pseudo-first-order kinetic well with an activation energy of 21.32 kJ/mol. The intrinsic influencing mechanism was also investigated. The quenching experiment and electron spin resonance (ESR) indicated that sulfate and hydroxyl radicals were produced by the effective activation of PMS by MnFe-LDH, resulting in a high rate of decolorization. The possible AO7 removal pathway in the constructed MnFe-LDH/PMS system was presented on the basis of UV-vis spectrum analysis and GC-MS, which suggested that the AO7 degradation was firstly initiated by breaking azo linkages, then generated phenyl and naphthalene intermediates and finally presented as ring-opening products. This effective MnFe-LDH/PMS system showed great application potential in the purification of wastewater contaminated by refractory organic pollutants.

Greatly Enhanced Faradic Capacities of 3D Porous Mn3O4/G Composites as Lithium-Ion Anodes and Supercapacitors by C-O-Mn Bonding

Through C-O-Mn bonding, graphene nanosheets are homogeneously dispersed in porous Mn₃O₄ to take full advantages of porous Mn₃O₄ and graphene nanosheets, making the as-formed three-dimensional porous Mn₃O₄/reduced graphene oxide (rGO) composite exhibit good electrochemical performance. Besides, C-O-Mn bonding is demonstrated to greatly promote the Faradic reactions of the composite, resulting in the enhancement of its real capacity in supercapacitor (SC) electrodes as well as lithium-ion battery (LIB) anodes. By simply fine-tuning the content of graphene (<7 wt %), the composite with 2.8 wt % of rGO delivers a high capacitance of 315 F g^-1 at 0.5 A g^-1 with a high rate capability of 64.7% at 30 A g^-1 and an excellent cycling stability of 105% (5 A g^-1, 5000 cycles) as an SC electrode. Also, the one with 6.9 wt % rGO can present a reversible capacity of more than 1500 mAh g^-1 at 0.05 A g^-1 as the LIB anode, the highest value reported to date, which remains 561 mAh g^-1 at 1 A g^-1.

A comprehensive performance evaluation of heterogeneous Bi2Fe4O9/peroxymonosulfate system for sulfamethoxazole degradation

In this study, a Bi₂Fe₄O₉ catalyst with nanoplate morphology was fabricated using a facile hydrothermal method. It was used as a catalyst to activate peroxymonosulfate (PMS) for aqueous sulfamethoxazole (SMX) removal. A comprehensive performance evaluation of the Bi₂Fe₄O₉/PMS system was conducted by investigating the effects of pH, PMS dosage, catalyst loading, SMX concentration, temperature, and halides (Cl^- and Br^-) on the degradation of SMX. The Bi₂Fe₄O₉/PMS system demonstrated a remarkable catalytic activity with >95% SMX removal within 30 min (conditions: pH 3.8, [Bi₂Fe₄O₉] = 0.1 g L^-1, [SMX]:[PMS] mol ratio =1:20). It was found that both Cl^- and Br^- can lead to the formation of PMS-induced reactive halide species (i.e. HClO, HBrO, and Br₂) which can also react with SMX forming halogenated SMX byproducts. Based on the detected degradation byproducts, the major SMX degradation pathway in the Bi₂Fe₄O₉/PMS system is proposed. The SMX degradation by Bi₂Fe₄O₉/PMS system in the wastewater secondary effluent (SE) was also investigated. The results showed that SMX degradation rate in the SE was relatively slower than in the deionized water due to (i) reactive radical scavenging by water matrix species found in SE (e.g.: dissolved organic matters (DOCs), etc.), and (ii) partial deactivation of the catalyst by DOCs. Nevertheless, the selectivity of the SO₄^•- towards SMX degradation was evidenced from the rapid SMX degradation despite the high background DOCs in the SE. At least four times the dosage of PMS is required for SMX degradation in the SE to achieve a similar SMX removal efficiency to that of the deionized water matrix.

Degradation of methylene blue with magnetic Co-doped Fe3O4@FeOOH nanocomposites as heterogeneous catalysts of peroxymonosulfate

Magnetic Co-doped Fe₃O₄@FeOOH nanocomposites were prepared in one step using the hydrothermal synthesis process for catalyzing peroxymonosulfate (PMS) to degrade refractory methylene blue (MB) at a wide pH range (3.0–10.0). The catalysts' physiochemical properties were characterized by different equipment; Fe³⁺/Fe²⁺ and Co³⁺/Co²⁺ were confirmed to coexist in the nanocomposite by X-ray photoelectron spectroscopy. The nanocomposite effectively catalyzed PMS's decoloration (99.2%) and mineralization (64.7%) of MB. The formation of Co/Fe–OH complexes at the surface of nanoparticles was proposed to facilitate heterogeneous PMS activation. Compared with the observation for Fe₃O₄@FeOOH, the pseudo-first-order reaction constant was enhanced by 36 times due to Co substitution (0.1620 min⁻¹vs. 0.0045 min⁻¹), which was assigned to the redox recycle of Fe³⁺/Fe²⁺ and Co³⁺/Co²⁺ in Co-doped Fe₃O₄@FeOOH. Besides, the catalyst could be easily reused by magnetic separation and exhibited relatively long-term stability.

Magnetic Co-doped Fe₃O₄@FeOOH nanocomposites were prepared in one step using the hydrothermal synthesis process for catalyzing peroxymonosulfate (PMS) to degrade refractory methylene blue (MB) at a wide pH range (3.0–10.0).

Degradation of Acid Orange 7 by peroxymonosulfate activated with the recyclable nanocomposites of g-C3N4 modified magnetic carbon

Carbon-based catalysts have attracted high attention since they are greener and cheaper, while magnetic nanomaterials are very useful in environmental application because of the easy recovery and operation given by the magnetic separability. Therefore, graphitic carbon nitride modified magnetic carbon nanocomposites Fe₃O₄@C/g-C₃N₄ was prepared herein for the first time as a new carbon-based catalyst for the activation of peroxymonosulfate (PMS). The catalytic properties of Fe₃O₄@C/g-C₃N₄ in activating PMS for the degradation of Acid Orange 7 (AO 7), a model organic pollutant, were investigated. AO 7 degradation efficiency was significantly enhanced after modification of Fe₃O₄@C with g-C₃N₄, and the composite Fe₃O₄@C/g-C₃N₄ from loading of 5 wt% g-C₃N₄ and calcined at 300 °C for 30 min exhibited the best performance. AO 7 could be efficiently decolorized using the "Fe₃O₄@C/C₃N₄ (5%) + PSM" system within the pH range of 2-6, and 97% of AO 7 could be removed in 20 min without pH adjustment (pH = 4). Radical quenching and EPR studies confirmed that both sulfate and hydroxyl radicals produced from PMS activation were the active species responsible for the oxidation of AO 7. The degradation mechanism was suggested based on the experimental results and XPS analyses. It was proposed that the CO groups on the carbon surface of Fe₃O₄@C rather than the CO in g-C₃N₄ played a key role as the active sites for PMS activation. The catalyst was magnetically separable and displayed good stability and reusability, thus providing a potentially green catalyst for sustainable remediation of organic pollutants.

Heterogeneous activation of peroxymonosulfate by LaCo1-xCuxO3 perovskites for degradation of organic pollutants

Recently cobalt-based heterogeneous catalysts have been widely investigated for peroxymonosulfate (PMS) activation in sulfate radical-based advanced oxidation processes. However, the improvement of the catalytic performance for PMS activation remains to be a challenge. As the limiting step, the rapid transformation of Co^II/Co^III redox pairs is crucial for PMS activation. Perovskites attract increasing attention due to their controllable oxidation state of B-site metal and formation of oxygen vacancies, which accelerates the cycle of redox pairs. LaCo_1-xM_xO₃ (M = Cu, Fe and Mn) perovskites as heterogeneous catalysts of PMS were synthesized for the degradation of phenol. The results showed that LaCo_0.4Cu_0.6O₃ exhibited the highest catalytic activity. The pseudo first-order kinetic constant of phenol degradation on LaCo_0.4Cu_0.6O₃ is 0.302 min^-1, being about 5 times as high as Co²⁺ with same molar concentration of cobalt in LaCo_0.4Cu_0.6O₃. XPS analysis confirmed that substitution of copper could promote the cycle of Co^II/Co^III, thus enhance the catalytic efficiency for PMS activation. The facilitated cycle of Co^II/Co^III played a crucial role in the generation of sulfate radicals, hydroxyl radicals and singlet oxygen. And sulfate radical was the primary radical responsible for pollutants degradation. The results provide insights into constructing novel perovskite catalysts for the removal of organic pollutants in water.

Free-standing hierarchical α-MnO2@CuO membrane for catalytic filtration degradation of organic pollutants

Catalytic membrane, due to its compact reactor assembling, high catalytic performance as well as low energy consumption, has proved to be more attractive for wastewater treatment. In this work, a free-standing α-MnO₂@CuO membrane with hierarchical nanostructures was prepared and evaluated as the catalytic membrane to generate radicals from peroxymonosulfate (PMS) for the oxidative degradation of organic dyes in aqueous solution. Benefiting from the high mass transport efficiency and the hierarchical nanostructures, a superior catalytic activity of the membrane was observed for organic dyes degradation. As a typical organic dye, more than 99% of methylene blue (MB) was degraded within 0.23 s using dead-end filtration cell. The effects of flow rate, PMS concentration and buffer solution on MB degradation were further investigated. Besides MB, the catalytic membrane also showed excellent performance for the removal of other dyes, such as congo red, methyl orange, rhodamine B, acid chrome blue K and malachite green. Moreover, the mechanism study indicated that OH and SO₄^- generated from the interaction between PMS and Mn/Cu species with different oxidation states mainly accounted for the dyes degradation. The catalytic filtration process using α-MnO₂@CuO catalytic membrane could provide a novel method for wastewater purification with high efficiency and low energy consumption.

Activation of peroxymonosulfate using drinking water treatment residuals for the degradation of atrazine

Drinking water treatment residuals (WTRs) are safe byproducts of water treatment plants containing iron. This work studies the degradation of atrazine (ATZ) by WTR-catalyzed peroxymonosulfate (PMS) in aqueous solutions. Factors that affect the catalytic performance (the PMS concentration, catalyst dose, initial solution pH, reaction temperature and water matrix species) were investigated. The results show that the catalytic degradation efficiency of ATZ increases with the increase in PMS concentration and temperature, whereas a higher content of WTRs results in lower removal efficiency because of the quenching effect and negative effect of high pH. For an initial solution pH of 3 and 5, 94.1% and 87.4% of ATZ degradation can be achieved within 6h, whereas the value is only 26% for pH of 7. The production of sulfate radicals (SO₄^-) and hydroxyl radicals (OH) was confirmed by classic radical quenching and electron spin resonance (ESR) tests. Based on the GC-MS and LC-MS results, the main degradation pathways of ATZ may contain dealkylation, dechlorination-hydroxylation, and alkyl chain oxidation processes. In addition to the ATZ removal ability, the WTRs/PMS system can simultaneously remove phosphorus. This article provides a new idea for wastewater treatment and usage of WTRs as a resource.

Degradation of Bisphenol A by Peroxymonosulfate Catalytically Activated with Mn1.8Fe1.2O4 Nanospheres: Synergism between Mn and Fe

A high-efficient, low-cost, and eco-friendly catalyst is highly desired to activate peroxides for environmental remediation. Due to the potential synergistic effect between bimetallic oxides' two different metal cations, these oxides exhibit superior performance in the catalytic activation of peroxymonosulfate (PMS). In this work, novel Mn_1.8Fe_1.2O₄ nanospheres were synthesized and used to activate PMS for the degradation of bisphenol A (BPA), a typical refractory pollutant. The catalytic performance of the Mn_1.8Fe_1.2O₄ nanospheres was substantially greater than that of the Mn/Fe monometallic oxides and remained efficient in a wide pH range from 4 to 10. More importantly, a synergistic effect between solid-state Mn and Fe was identified in control experiments with Mn₃O₄ and Fe₃O₄. Mn was inferred to be the primary active site in the surface of the Mn_1.8Fe_1.2O₄ nanospheres, while Fe(III) was found to play a key role in the synergism with Mn by acting as the main adsorption site for the reaction substrates. Both sulfate and hydroxyl radicals were generated in the PMS activation process. The intermediates of BPA degradation were identified and the degradation pathways were proposed. This work is expected to help to elucidate the rational design and efficient synthesis of bimetallic materials for PMS activation.

Degradation of sulfamethazine using Fe3O4-Mn3O4/reduced graphene oxide hybrid as Fenton-like catalyst

In this paper, Fe₃O₄-Mn₃O₄/reduced graphene oxide (RGO) hybrid was synthesized through polyol process and impregnation method and used as heterogeneous Fenton-like catalyst for degradation of sulfamethazine (SMT) in aqueous solution. The hybrid catalyst had higher catalytic efficiency compared with Fe₃O₄-Mn₃O₄ and Mn₃O₄ as catalyst for degradation of SMT_. The effects of pH value, H₂O₂ concentration, catalyst dosage, initial SMT concentration and temperature on SMT degradation were investigated. The removal efficiency of SMT was about 98% at following optimal conditions: pH=3, T=35°C, Fe₃O₄/Mn₃O₄-RGO composites=0.5g/L, H₂O₂=6mM. The inhibitor experiments indicated that the main active species was hydroxyl radicals (·OH) on catalyst surface. At last, the possible catalytic mechanism was proposed.

Synthesis and characterization of a ZnMn2O4nanostructure as a chemical nanosensor: a facile and new approach for colorimetric determination of omeprazole and lansoprazole drugs

ZnMn₂O₄nanostructure was preparedviaan auto-combustion method using different fuels, and it was used as a chemical sensor for determination of omeprazole and lansoprazole drugs.

CoMoO4 as a novel heterogeneous catalyst of peroxymonosulfate activation for the degradation of organic dyes

The catalytic performance of CoMoO₄ for peroxymonosulfate activation in an advanced oxidation process was investigated for the first time.

Facile synthesis of nano-Zn/Bi–reduced graphene oxide for enhanced photocatalytic elimination of chlorinated organic pollutants under visible light

A Zn/Bi–RGO co-assembly was synthesized by a simple co-precipitation followed by hydrothermal process, and it exhibited enhanced visible light photocatalytic activity on remediation of chlorophenols.

Removal of sulfamethazine antibiotics using CeFe-graphene nanocomposite as catalyst by Fenton-like process

The presence of sulfonamide (SMT) antibiotics in aquatic environments has received increasing attention in recent years, and they are ubiquitous pollutants which cannot be effectively removed by conventional wastewater treatment processes. In this paper, the nanocomposites Ce(0)/Fe(0)-reduced graphene oxide (Ce(0)/Fe(0)-RGO) were synthesized through chemical reduction method, and characterized by Raman and FTIR before and after use. The addition of RGO can prevent the agglomeration of Ce(0) and Fe(0). The elimination of SMT can be divided into adsorption and degradation process. The adsorption of SMT onto the catalyst can enhance its degradation. The effect of pH value, concentration of H2O2, catalyst dosage, temperature and initial SMT concentration on the removal efficiency of SMT was determined. When pH = 7, T = 25 °C, H2O2 = 8 mM, Ce(0)/Fe(0)-RGO = 0.5 g/L, SMT = 20 mg/L, the removal efficiency of SMT and TOC was 99% and 73%, respectively. The stability of the catalysts was evaluated with repeated batch experiments using ethanol, water and acid as solvents to wash the used catalysts, respectively. The surface change of the catalysts after each use was characterized by Raman and FTIR analysis. The intermediates were detected by GC-MS and IC, the possible degradation pathway of SMT was tentatively proposed.

Ultrafine Mn3O4 Nanowires/Three-Dimensional Graphene/Single-Walled Carbon Nanotube Composites: Superior Electrocatalysts for Oxygen Reduction and Enhanced Mg/Air Batteries

The exploration of highly efficient catalysts for the oxygen reduction reaction to improve sluggish kinetics still remains a great challenge for advanced energy conversion and storage in metal/air batteries. In this work, ultrafine Mn₃O₄ nanowires/three-dimensional graphene/single-walled carbon nanotube catalysts with an electron transfer number of 3.95 (at 0.60 V vs Ag/AgCl) and kinetic current density of 21.7-28.8 mA cm^-2 were developed via a microwave-irradiation-assisted hexadecyl trimethylammonium bromide (CTAB) surfactant procedure to greatly enhance the overall catalytic performance in Mg/air batteries. To match the electrochemical activity of the cathode catalysts, a large-scale Mg anode prepared with micropersimmon-like particles via a mechanical disintegrator and Mg(NO₃)₂-NaNO₂-based electrolyte containing 1.0 wt % trihexyl(tetradecyl)phosphonium chloride ionic liquid were applied. Combining the ultrafine Mn₃O₄ nanowires/three-dimensional graphene/single-walled carbon nanotube as an efficient electrocatalyst for the oxygen reduction reaction and an Mg micro-/nanoscale anode in the novel electrolyte, the advanced Mg/air batteries demonstrated a high cell open circuit voltage (1.49 V), a high plateau voltage (1.34 V), and a long discharge time (4177 min) at 0.2 mA cm^-1, showing a high energy density. Therefore, it is believed that this device configuration has great potential for application in new energy storage technologies.

Activation of peroxymonosulfate by iron-based catalysts for orange G degradation: role of hydroxylamine

NH₂OH enhances the performance of iron-based oxides/hydroxides by accelerating Fe(iii)/Fe(ii) cycling and radicals production.

Degradation of organic pollutants by NiFe2O4/peroxymonosulfate: efficiency, influential factors and catalytic mechanism

Catalytic performance of NiFe₂O₄/PMS system as advanced oxidation technologies in pure water and actual water was studied, and various influential factors and catalytic mechanism were also investigated.

Fibrous porous silica microspheres decorated with Mn3O4 for effective removal of methyl orange from aqueous solution

In this work, trimanganese tetraoxide (Mn₃O₄) functionalized fibrous porous silica microspheres (KCC-1) with well-dispersed and excellent adsorption capacities were successfully synthesized by a simple and mild method for the first time.

Decolorization of Acid Orange II dye by peroxymonosulfate activated with magnetic Fe3O4@C/Co nanocomposites

Magnetic Fe₃O₄@C/Co nanocomposites exhibited high efficiency and reusability in activation of PMS for decolorization of AO II solution.