Intrinsic antimicrobial resistance: Molecular biomaterials to combat microbial biofilms and bacterial persisters

The escalating rise in antimicrobial resistance (AMR) coupled with a declining arsenal of new antibiotics is imposing serious threats to global public health. A pervasive aspect of many acquired AMR infections is that the pathogenic microorganisms exist as biofilms, which are equipped with superior survival strategies. In addition, persistent and recalcitrant infections are seeded with bacterial persister cells at infection sites. Together, conventional antibiotic therapeutics often fail in the complete treatment of infections associated with bacterial persisters and biofilms. Novel therapeutics have been attempted to tackle AMR, biofilms, and persister-associated complex infections. This review focuses on the progress in designing molecular biomaterials and therapeutics to address acquired and intrinsic AMR, and the fundamental microbiology behind biofilms and persisters. Starting with a brief introduction of AMR basics and approaches to tackling acquired AMR, the emphasis is placed on various biomaterial approaches to combating intrinsic AMR, including (1) semi-synthetic antibiotics; (2) macromolecular or polymeric biomaterials mimicking antimicrobial peptides; (3) adjuvant effects in synergy; (4) nano-therapeutics; (5) nitric oxide-releasing antimicrobials; (6) antimicrobial hydrogels; (7) antimicrobial coatings. Particularly, the structure-activity relationship is elucidated in each category of these biomaterials. Finally, illuminating perspectives are provided for the future design of molecular biomaterials to bypass AMR and cure chronic multi-drug resistant (MDR) infections.

Application progress of rosin in food packaging: A review

Foodborne illness caused by Gram bacteria is the most important food safety issue worldwide. Food packaging film is a very important means to extend the shelf life of food. It reduces microbial contamination and provides food safety assurance during the sales process. However, the food packaging material is derived from plastic. Most plastics are not only non-degradable but also harmful to human health. Biodegradable natural polymers are an ideal substitute, but their poor mechanical properties, hydrophilicity and weak antibacterial properties limit their applications. Rosin is an oily pine ester in the pine family, which is a natural renewable resource with a wide range of sources. It is widely used in various fields, such as surfactants, adhesives, drug loading, antibacterial, etc. However, there are only a few reports on the application of rosin in food packaging. It is worth noting that the unique hydrogenated phenanthrene ring structure of rosin can enhance the thermal stability, hydrophobicity and antibacterial properties of food packaging. More importantly, rosin has a wide range of sources, good biocompatibility, and can be degraded in nature. These advantages are conducive to the application of rosin in food packaging. However, previous reviews focused on resins, silicone rubbers and surfactants. In this review we will focus on the application of rosin in food packaging.

A Methylazanediyl Bisacetamide Derivative Sensitizes Staphylococcus aureus Persisters to a Combination of Gentamicin And Daptomycin

Infections caused by Staphylococcus aureus, notably methicillin-resistant S. aureus (MRSA), pose treatment challenges due to its ability to tolerate antibiotics and develop antibiotic resistance. The former, a mechanism independent of genetic changes, allows bacteria to withstand antibiotics by altering metabolic processes. Here, a potent methylazanediyl bisacetamide derivative, MB6, is described, which selectively targets MRSA membranes over mammalian membranes without observable resistance development. Although MB6 is effective against growing MRSA cells, its antimicrobial activity against MRSA persisters is limited. Nevertheless, MB6 significantly potentiates the bactericidal activity of gentamicin against MRSA persisters by facilitating gentamicin uptake. In addition, MB6 in combination with daptomycin exhibits enhanced anti-persister activity through mutual reinforcement of their membrane-disrupting activities. Crucially, the "triple" combination of MB6, gentamicin, and daptomycin exhibits a marked enhancement in the killing of MRSA persisters compared to individual components or any double combinations. These findings underscore the potential of MB6 to function as a potent and selective membrane-active antimicrobial adjuvant to enhance the efficacy of existing antibiotics against persister cells. The molecular mechanisms of MB6 elucidated in this study provide valuable insights for designing anti-persister adjuvants and for developing new antimicrobial combination strategies to overcome the current limitations of antibiotic treatments.

Orientational Nanoconjugation with Gold Endows Marked Antimicrobial Potential and Drugability of Ultrashort Dipeptides

Antibiotic resistance is a global threat. Antimicrobial peptides (AMPs) are highly desirable to treat multidrug-resistant pathogen infection. However, few AMPs are clinically available, due to high cost, instability, and poor selectivity. Here, ultrashort AMPs (2-3 residues with an N-terminal cysteine) are designed and assembled as gold nanoparticles. Au-S conjugation and ultrashort size restrict nonspecific reactions and peptide orientation, thus concentrating positively charged residues on the surface. The nanostructured assemblies enormously enhance antimicrobial abilities by 1000-6000-fold and stability. One representative (Au-Cys-Arg-NH2, Au_CR) shows selective antibacterial activity against Staphylococcus aureus with 10 nM minimal inhibitory concentration. Au_CR has comparable or better in vivo antimicrobial potency than vancomycin and methicillin, with low propensity to induce resistance, little side effects, and high stability (17.5 h plasma half-life). Au_CR acts by inducing collapse of membrane potential and rupture of the bacterial membrane. The report provides insights for developing AMP-metal nanohybrids, particularly tethering nonspecific reactions and AMP orientation on the metal surface.

A transient vesicular glue for amplification and temporal regulation of biocatalytic reaction networks

Regulation of enzyme activity and biocatalytic cascades on compartmentalized cellular components is key to the adaptation of cellular processes such as signal transduction and metabolism in response to varying external conditions. Synthetic molecular glues have enabled enzyme inhibition and regulation of protein-protein interactions. So far, all the molecular glue systems based on covalent interactions operated under steady-state conditions. To emulate dynamic biological processes under dissipative conditions, we introduce herein a transient supramolecular glue with a controllable lifetime. The transient system uses multivalent supramolecular interactions between guanidinium group-bearing surfactants and adenosine triphosphate (ATP), resulting in bilayer vesicle structures. Unlike the conventional chemical agents for dissipative assemblies, ATP here plays the dual role of providing a structural component for the assembly as well as presenting active functional groups to "glue" enzymes on the surface. While gluing of the enzymes on the vesicles achieves augmented catalysis, oscillation of ATP concentration allows temporal control of the catalytic activities similar to the dissipative cellular nanoreactors. We further demonstrate temporal upregulation and control of complex biocatalytic reaction networks on the vesicles. Altogether, the temporal activation of biocatalytic cascades on the dissipative vesicular glue presents an adaptable and dynamic system emulating heterogeneous cellular processes, opening up avenues for effective protocell construction and therapeutic interventions.

Facially Amphiphilic Bile Acid-Functionalized Antimicrobials: Combating Pathogenic Bacteria, Fungi, and Their Biofilms

We report facially amphiphilic bile acid-based antimicrobials with a broad spectrum of activity against both bacterial and fungal pathogens and negligible detrimental effects on mammalian cells. Two lead compounds eliminated dormant subpopulations of various bacterial species, unlike conventional antibiotics. The lead compounds were also effective in eradicating biofilms of methicillin-resistant Staphylococcus aureus (MRSA), Pseudomonas aeruginosa, and Candida albicans. Additionally, these compounds substantially inhibited the formation of fungal biofilms (C. albicans). Mechanistic investigations revealed the membrane-active nature and endogenous reactive oxygen species (ROS) induction ability of these compounds. Finally, no detectable resistance was developed by the bacterial strains against this class of membrane-targeting antimicrobials.

Green Synthesis of Liquid Metal-Doped Carbon Dots for Treating Multidrug-Resistant Gram-Negative Bacteria

Global emergence of multidrug-resistant (MDR) gram-negative bacteria triggers severe infections that result in an epidemic. It is urgent to discover novel classes of antibacterial agents. Here, a green route for synthesizing polyethylene glycol-based carbon dots (PEG-CDs) doped with liquid metal (LM-Cdots) via a solvent-free system is presented. LM-Cdots synthesized via ultrasound exhibit great antibacterial activity against gram-negative bacteria (E. coli, P. aeruginosa, K. pneumoniae, and A. baumannii) and their multidrug-resistant (MDR) clinical isolates. In the in vitro antibacterial test with MDR K. pneumoniae, LM-Cdots show an extremely low minimum inhibition concentration (MIC) of 0.63 µg mL-1 . Compared to naked PEG-CDs, the MIC is improved by 1000 times. In vivo results reveal that LM-Cdots can accelerate wound healing with low biotoxicity and inflammation.

Facial amphiphilicity index correlating chemical structures with antimicrobial efficacy

Facial amphiphilicity is an extraordinary chemical structure feature of a variety of antimicrobial peptides and polymers. Vast efforts have been dedicated to small molecular, macromolecular and dendrimer-like systems to mimic this highly preferred structure or conformation, including local facial amphiphilicity and global amphiphilicity. This work conceptualizes Facial Amphiphilicity Index (FAI) as a numerical value to quantitatively characterize the measure of chemical compositions and structural features in dictating antimicrobial efficacy. FAI is a ratio of numbers of charges to rings, representing both compositions of hydrophilicity and hydrophobicity. Cationic derivatives of multicyclic compounds were evaluated as model systems for testing antimicrobial selectivity against Gram-negative and Gram-positive bacteria. Both monocyclic and bicyclic compounds are non-antimicrobial regardless of FAIs. Antimicrobial efficacy was observed with systems having larger cross-sectional areas including tricyclic abietic acid and tetracyclic bile acid. While low and high FAIs respectively lead to higher and lower antimicrobial efficacy, in consideration of cytotoxicity, the sweet spot is typically suited with intermediate FAIs for each specific system. This can be well explained by the synergistic hydrophobic-hydrophobic and electrostatic interactions with bacterial cell membranes and the difference between bacterial and mammalian cell membranes. The adoption of FAI would pave a new avenue toward the design of next-generation antimicrobial macromolecules and peptides.

•

Established a numerical index to quantify the effect of facial amphiphilicity on antimicrobial efficacy.

•

Evaluated the facial amphiphilicity index of multicyclic compounds possessing various rings and cationic charges.

•

Provided this index a new tool toward more quantitative designs of AMP mimics.

Antimicrobial activity of the membrane-active compound nTZDpa is enhanced at low pH

The opportunistic human pathogen Staphylococcus aureus can evade antibiotics by acquiring antibiotic resistance genes or by entering into a non-growing dormant state. Moreover, the particular circumstances of a specific infection site, such as acidity or anaerobicity, often weaken antibiotic potency. Decreased bacterial susceptibility combined with diminished antibiotic potency is responsible for high failure rates when treating S. aureus infections. Here, we report that the membrane-active antimicrobial agent nTZDpa does not only exhibit enhanced antibiotic activity against multidrug-resistant Gram-positive pathogens in acidic pH, but also retains antimicrobial potency under anaerobic conditions. This agent completely eradicated highly antibiotic-tolerant cells and biofilms formed by methicillin-resistant S. aureus at pH 5.5 at concentrations at which it was not potent at pH 7.4. Furthermore, nTZDpa was more potent at synergistically potentiating gentamicin killing against antibiotic-tolerant MRSA cells at low pH than at high pH. All-atom molecular dynamics simulations combined with membrane-permeabilization assays revealed that the neutral form of nTZDpa, which contains carboxylic acid, is more effective than the deprotonated form at penetrating the bacterial membrane and plays an essential role in membrane activity. An acidic pH increases the proportion of the neutrally charged nTZDpa, which results in antimicrobial enhancement. Our results provide key insights into rational design of pH-sensitive membrane-active antimicrobials and antibiotic adjuvants that are effective in an infection environment. These findings demonstrate that nTZDpa is a promising lead compound for developing new therapeutics against hard-to-cure infections caused by drug-resistant and -tolerant S. aureus.

Chemical syntheses of bioinspired and biomimetic polymers toward biobased materials

The rich structures and hierarchical organizations in nature provide many sources of inspiration for advanced material designs. We wish to recapitulate properties such as high mechanical strength, colour-changing ability, autonomous healing and antimicrobial efficacy in next-generation synthetic materials. Common in nature are non-covalent interactions such as hydrogen bonding, ionic interactions and hydrophobic effects, which are all useful motifs in tailor-made materials. Among these are biobased components, which are ubiquitously conceptualized in the space of recently developed bioinspired and biomimetic materials. In this regard, sustainable organic polymer chemistry enables us to tune the properties and functions of such materials that are essential for daily life. In this Review, we discuss recent progress in bioinspired and biomimetic polymers and provide insights into biobased materials through the evolution of chemical approaches, including networking/crosslinking, dynamic interactions and self-assembly. We focus on advances in biobased materials; namely polymeric mimics of resilin and spider silk, mechanically and optically adaptive materials, self-healing elastomers and hydrogels, and antimicrobial polymers.

In-Feed Supplementation of Resin Acid-Enriched Composition Modulates Gut Microbiota, Improves Growth Performance, and Reduces Post-Weaning Diarrhea and Gut Inflammation in Piglets

The weaning process represents a delicate phase for piglets, and is often characterized by lower feed intake, lower weight gain, diarrhea, and ultimately increased mortality. We aimed to determine the effects of RAC supplementation in diets on improving piglet growth and vitality, reducing post-weaning diarrhea, and enhancing gut health. In a 2 × 2 × 2 factorial experiment, we selected forty sows and their piglets. Piglets were followed until seven weeks of age. There were no significant differences found between RAC treated and control piglets until weaning (p = 0.26). However, three weeks after weaning, RAC treated piglets had higher body weight and average daily growth (ADG) than the control piglets (p = 0.003). In addition, the piglets that received RAC after weaning, irrespective of mother or prior creep feed treatment, had lower post-weaning diarrhea (PWD) and fecal myeloperoxidase (MPO) level than control piglets. Gut microbiota analysis in post-weaning piglets revealed that RAC supplementation significantly increased Lachnospiraceae_unclassified, Blautia, Butyricicoccus, Gemmiger and Holdemanella, and decreased Bacteroidales_unclassified. Overall, RAC supplementation to piglets modulated post-weaning gut microbiota, improved growth performance after weaning, reduced post-weaning diarrhea and reduced fecal myeloperoxidase levels. We therefore consider RAC to be a potential natural feed supplement to prevent enteric infections and improve growth performance in weaning piglets.

Conformational Changes of Anoplin, W-MreB1-9, and (KFF)3K Peptides near the Membranes

Many peptides interact with biological membranes, but elucidating these interactions is challenging because cellular membranes are complex and peptides are structurally flexible. To contribute to understanding how the membrane-active peptides behave near the membranes, we investigated peptide structural changes in different lipid surroundings. We focused on two antimicrobial peptides, anoplin and W-MreB1-9, and one cell-penetrating peptide, (KFF)3K. Firstly, by using circular dichroism spectroscopy, we determined the secondary structures of these peptides when interacting with micelles, liposomes, E. coli lipopolysaccharides, and live E. coli bacteria. The peptides were disordered in the buffer, but anoplin and W-MreB1-9 displayed lipid-induced helicity. Yet, structural changes of the peptide depended on the composition and concentration of the membranes. Secondly, we quantified the destructive activity of peptides against liposomes by monitoring the release of a fluorescent dye (calcein) from the liposomes treated with peptides. We observed that only for anoplin and W-MreB1-9 calcein leakage from liposomes depended on the peptide concentration. Thirdly, bacterial growth inhibition assays showed that peptide conformational changes, evoked by the lipid environments, do not directly correlate with the antimicrobial activity of the peptides. However, understanding the relation between peptide structural properties, mechanisms of membrane disruption, and their biological activities can guide the design of membrane-active peptides.

The Neutrally Charged Diarylurea Compound PQ401 Kills Antibiotic-Resistant and Antibiotic-Tolerant Staphylococcus aureus

Membrane-damaging antimicrobial agents have great potential to treat multidrug-resistant or multidrug-tolerant bacteria against which conventional antibiotics are not effective. However, their therapeutic applications are often hampered due to their low selectivity to bacterial over mammalian membranes or their potential for cross-resistance to a broad spectrum of cationic membrane-active antimicrobial agents. We discovered that the diarylurea derivative compound PQ401 has antimicrobial potency against multidrug-resistant and multidrug-tolerant Staphylococcus aureus. PQ401 selectively disrupts bacterial membrane lipid bilayers in comparison to mammalian membranes. Unlike cationic membrane-active antimicrobials, the neutral form of PQ401 rather than its cationic form exhibits maximum membrane activity. Overall, our results demonstrate that PQ401 could be a promising lead compound that overcomes the current limitations of membrane selectivity and cross-resistance. Also, this work provides deeper insight into the design and development of new noncharged membrane-targeting therapeutics to combat hard-to-cure bacterial infections.

Resistance or tolerance to traditional antibiotics is a challenging issue in antimicrobial chemotherapy. Moreover, traditional bactericidal antibiotics kill only actively growing bacterial cells, whereas nongrowing metabolically inactive cells are tolerant to and therefore “persist” in the presence of legacy antibiotics. Here, we report that the diarylurea derivative PQ401, previously characterized as an inhibitor of the insulin-like growth factor I receptor, kills both antibiotic-resistant and nongrowing antibiotic-tolerant methicillin-resistant Staphylococcus aureus (MRSA) by lipid bilayer disruption. PQ401 showed several beneficial properties as an antimicrobial lead compound, including rapid killing kinetics, low probability for resistance development, high selectivity to bacterial membranes compared to mammalian membranes, and synergism with gentamicin. In contrast to well-studied membrane-disrupting cationic antimicrobial low-molecular-weight compounds and peptides, molecular dynamic simulations supported by efficacy data demonstrate that the neutral form of PQ401 penetrates and subsequently embeds into bacterial lipid bilayers more effectively than the cationic form. Lastly, PQ401 showed efficacy in both the Caenorhabditis elegans and Galleria mellonella models of MRSA infection. These data suggest that PQ401 may be a lead candidate for repurposing as a membrane-active antimicrobial and has potential for further development as a human antibacterial therapeutic for difficult-to-treat infections caused by both drug-resistant and -tolerant S. aureus.

Facial Amphiphilicity-Induced Polymer Nanostructures for Antimicrobial Applications

New antimicrobial agents are needed to address ever-increasing antimicrobial resistance and a growing epidemic of infections caused by multidrug resistant pathogens. We design nanostructured antimicrobial copolymers containing multicyclic natural products that bear facial amphiphilicity. Bile acid based macromolecular architectures of these nanostructures can interact preferentially with bacterial membranes. Incorporation of polyethylene glycol into the copolymers not only improved the colloidal stability of nanostructures but also increased the biocompatibility. This study investigated the effects of facial amphiphilicity, polymer architectures, and self-assembled nanostructures on antimicrobial activity. Advanced nanostructures such as spheres, vesicles, and rod-shaped aggregates are formed in water from the facial amphiphilic cationic copolymers via supramolecular interactions. These aggregates were particularly interactive toward Gram-positive and Gram-negative bacterial cell membranes and showed low hemolysis against mammalian cells.

Construction of antimicrobial and biocompatible cotton textile based on quaternary ammonium salt from rosin acid

Antimicrobial cotton textiles (CT) show great promise for wound dressings. However, modifying CTs to have antimicrobial properties requires balancing the killing of microbes while protecting normal cells. In this study, the surface of CT was modified using maleopimaric acid quaternary ammonium cations (MPA-N⁺) from rosin acid. The surfaces morphology and chemical composition were determined by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), which confirmed that the MPA-N⁺ modified CT (CT-g-MPA-N⁺) was prepared. CT-g-MPA-N⁺ shows strong and broad spectrum antimicrobial activities against Gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa) and Gram-positive bacteria (Staphylococcus aureus). It also exhibits prominent durability of antimicrobial capability even after soaking in PBS for 6 days, and can effectively inhibit bacterial biofilm formation. Most importantly, the excellent biocompatibility of CT-g-MPA-N⁺ was verified by hemocompatible and cytotoxic assays. This work is believed to be promising method to prepare antimicrobial cotton textiles by surface modification and suggest the great potential application in wound dressing.

Signaling pathway underlying splenocytes activation by polysaccharides from Atractylodis macrocephalae Koidz

Previous study demonstrated that total polysaccharides isolated from Atractylodis macrocephalae Koidz. (RAMPtp) were effective to eliminate intramammary infection in cows. The present study was designed to investigate the immunomodulatory activity of RAMPtp in mouse splenocytes. Splenocyte proliferation, natural killer (NK) cytotoxicity, productions of NO and cytokines, transcription factor activity as well as the signal pathways and receptor were examined. The results showed that RAMPtp significantly promoted splenocyte proliferation and made the cells enter S and G2/M phases, increased ratios of T/B cells, boosted NK cytotoxicity, enhanced transcriptional activities of nuclear factor of activated T cells (NFAT), nuclear factor κB (NF-κB) and activator protein 1 (AP-1), and stimulated secretions of NO, immunoglobulin G (IgG) and multiple cytokine families (IL-1α, IL-1β, IL-2, IL-3, IL-4, IL-6, IL-10, IL-12p40, IL-12p70, IL-13, IFN-γ, TNF-α, G-CSF, GM-CSF, KC, MIP-1α, MIP-1β, RANTES and Eotaxin). In addition, all the specific inhibitors against the mitogen-activated protein kinases (MAPKs) and NF-κB significantly suppressed the IL-6 production induced by RAMPtp. Moreover, splenocytes from Toll-like receptor 4 (TLR4) deficient mouse responded equally to RAMPtp stimulation as the wild-type. Therefore, RAMPtp might induce splenocytes activation at least in part via the TLR4-independent MAPKs and NF-κB signaling pathways. The present results would be useful to further understand the immunomodulatory mechanisms of RAMPtp in elimination of intramammary infection in cows.

Macromolecular-clustered facial amphiphilic antimicrobials

Bacterial infections and antibiotic resistance, particularly by Gram-negative pathogens, have become a global healthcare crisis. We report the design of a class of cationic antimicrobial polymers that cluster local facial amphiphilicity from repeating units to enhance interactions with bacterial membranes without requiring a globally conformational arrangement associated with highly unfavorable entropic loss. This concept of macromolecular architectures is demonstrated with a series of multicyclic natural product-based cationic polymers. We have shown that cholic acid derivatives with three charged head groups are more potent and selective than lithocholic and deoxycholic counterparts, particularly against Gram-negative bacteria. This is ascribed to the formation of true facial amphiphilicity with hydrophilic ion groups oriented on one face and hydrophobic multicyclic hydrocarbon structures on the opposite face. Such local facial amphiphilicity is clustered via a flexible macromolecular backbone in a concerted way when in contact with bacterial membranes.

Facially amphiphilic polyionene biocidal polymers derived from lithocholic acid

Bacterial infections have become a global issue that requires urgent attention, particularly regarding to emergence of multidrug resistant bacteria. We developed quaternary amine-containing antimicrobial poly(bile acid)s that contain a hydrophobic core of lithocholic acid in the main-chain. Interestingly, by choosing appropriate monomers, these cationic polymers can form core-shell micelles. These polymers exhibited biocidal activity against both Gram-positive and Gram-negative bacterial species. It is demonstrated that the micelles can deliver hydrophobic antibiotics that functionally have dual antimicrobial activities. Cytotoxicity assays against HeLa cells showed dosage-dependent toxicity for polymers with longer linkers.

A new class of synthetic retinoid antibiotics effective against bacterial persisters

A challenge in the treatment of Staphylococcus aureus infections is the high prevalence of methicillin-resistant S. aureus (MRSA) strains and the formation of non-growing, dormant 'persister' subpopulations that exhibit high levels of tolerance to antibiotics and have a role in chronic or recurrent infections. As conventional antibiotics are not effective in the treatment of infections caused by such bacteria, novel antibacterial therapeutics are urgently required. Here we used a Caenorhabditis elegans-MRSA infection screen to identify two synthetic retinoids, CD437 and CD1530, which kill both growing and persister MRSA cells by disrupting lipid bilayers. CD437 and CD1530 exhibit high killing rates, synergism with gentamicin, and a low probability of resistance selection. All-atom molecular dynamics simulations demonstrated that the ability of retinoids to penetrate and embed in lipid bilayers correlates with their bactericidal ability. An analogue of CD437 was found to retain anti-persister activity and show an improved cytotoxicity profile. Both CD437 and this analogue, alone or in combination with gentamicin, exhibit considerable efficacy in a mouse model of chronic MRSA infection. With further development and optimization, synthetic retinoids have the potential to become a new class of antimicrobials for the treatment of Gram-positive bacterial infections that are currently difficult to cure.

Intermolecular interaction and solid state characterization of abietic acid/chitosan solid dispersions possessing antimicrobial and antioxidant properties

The aim of this work was to prepare and characterize solid dispersions of abietic acid (AB) and chitosan (CS) to investigate how formulation of the mixture may help in the battle against microbial colonization in different areas, such as the biomedical field or the food industry. Solid dispersions were characterized by differential scanning calorimetry, infrared spectroscopy, Raman spectroscopy, polarized optical microscopy, zeta potential and size analysis. The data showed that the dispersion/solvent evaporation method formed solid dispersions in which abietic acid was molecularly dispersed in the carrier. A synergistic effect between the two components in terms of antioxidant and antimicrobial properties was found, especially in the formulations obtained with 1/1 AB/CS molar ratio. Interestingly, the aggregation state (amorphous/crystalline) of AB seemed to affect the antimicrobial activity of the formulation, suggesting increased bioactivity when the drug was in the amorphous state. These findings, together with the demonstrated biocompatibility of the formulations, seem to open promising perspectives for a successful application of the developed AB/CS formulations in the biomedical field or in the food industry.

The Mechanism by Which Luteolin Disrupts the Cytoplasmic Membrane of Methicillin-Resistant Staphylococcus aureus

Methicillin-resistant Staphylococcus aureus (MRSA) is one of the most versatile human pathogens. Luteolin (LUT) has anti-MRSA activity by disrupting the MRSA cytoplasmic membrane. However, the mechanism by which luteolin disrupts the membrane remains unclear. Here, we performed differential scanning calorimetry (DSC) and all-atomic molecular dynamics (AA-MD) simulations to investigate the interactions and effects of LUT on model membranes composed of phosphatidylcholine (PC) and phosphatidylglycerol (PG). We detected the transition thermodynamic parameters of dipalmitoylphosphatidylcholine (DPPC) liposomes, dipalmitoylphosphatidylglycerol (DPPG) liposomes, and liposomes composed of both DPPC and DPPG at different LUT concentrations and showed that LUT molecules were located between polar heads and the hydrophobic region of DPPC/DPPG. In the MD trajectories, LUT molecules ranging from 5 to 50 had different effects on the membranes thickness, fluidity and ordered property of lipids, and lateral pressure of lipid bilayers composed of dioleoylphosphatidylcholine (DOPC) and dioleoylphosphatidylglycerol (DOPG). Also, most LUT molecules were distributed in the region between the phosphorus atoms and C9 atoms of DOPC and DOPG. On the basis of the combination of these results, we conclude that the distinct effects of LUT on lipid bilayers composed of PCs and PGs may elucidate the mechanism by which LUT disrupts the cytoplasmic membrane of MRSA.

Trio Act of Boronolectin with Antibiotic-Metal Complexed Macromolecules toward Broad-Spectrum Antimicrobial Efficacy

Bacterial infections, particularly by Gram-negative pathogens, have become a serious threat to global healthcare due to the diminishing effectiveness of existing antibiotics. We report a nontraditional therapy to combine three components in one macromolecular system, in which boronic acid adheres to peptidoglycan or lipopolysaccharide via boron-polyol based boronolectin chemistry, cationic metal polymer frameworks interact with negatively charged cell membranes, and β-lactam antibiotics are reinstated with enhanced vitality to attack bacteria via evading the detrimental enzyme-catalyzed hydrolysis. These macromolecular systems exhibited high efficacy in combating pathogenic bacteria, especially Gram-negative strains, due to synergistic effects of multicomponents on interactions with bacterial cells. In vitro and in vivo cytotoxicity and hemolysis evaluation indicated that these multifunctional copolymers did not induce cell death by apoptosis, as well as did not alter the phenotypes of immune cells and did not show observable toxic effect on red blood cells.

Polyanionic Antimicrobial Membranes: An Experimental and Theoretical Study

Polycationic polymers have been widely used as antimicrobial materials because of their broad spectrum activity and potential use as new antibiotics. Herein, we report the synthesis of polyanionic antimicrobial membranes by in situ photo-cross-linking of a sulfate based anionic monomer, followed by cation-exchange with organic (quaternary ammonium or imidazolium) or metal (Ag⁺, Cu²⁺, Fe³⁺, Zn²⁺, Na⁺, K⁺) cations. The resultant polyanionic membranes show high and broad spectrum antibacterial activities against both bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Candida albicans ). In addition, the polyanionic antimicrobial membranes efficiently inhibited the formation of biofilms by SC5314 and its crk1 gene deleted (Δcrk1) C. albicans strains. Furthermore, the synthesized polyanionic membranes exhibit good blood compatibility, low cytotoxicity and long-term antibacterial stability, demonstrating safe antimicrobial materials in the application of healthcare.

Metal-Containing Poly(ionic liquid) Membranes for Antibacterial Applications

Imidazolium-type metal-containing ionic liquid (IL) monomers and their corresponding poly(ionic liquid) (PIL) membranes coordinated with CuCl₂ (PILM-Cu), FeCl₃ (PILM-Fe), or ZnCl₂ (PILM-Zn) were synthesized. The effect of metal ions on the antimicrobial activities against both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was investigated. Compared with pristine PILM-Br membrane, PILM-Cu, PILM-Fe, and PILM-Zn membranes exhibit enhanced antibacterial activities due to the attributes of both imidazolium cations and metal-containing anions. Furthermore, all of the metal-containing PIL membranes present low hemolysis toward human red blood cell and high long-term antibacterial stability, even after immersion in water for 90 days, demonstrating clinical feasibility in topical applications.

Monomer design strategies to create natural product-based polymer materials

In an effort towards enhancing function and sustainability, natural products have become of interest in the field of polymer chemistry.

Plant pressure sensitive adhesives: similar chemical properties in distantly related plant lineages

A mixture of resins based on aliphatic esters and carboxylic acids occurs in distantly related genera Peperomia and Roridula , serving different functions as adhesion in seed dispersal and prey capture. According to mechanical characteristics, adhesive secretions on both leaves of the carnivorous flypaper Roridula gorgonias and epizoochorous fruits of Peperomia polystachya were expected to be similar. The chemical analysis of these adhesives turned out to be challenging because of the limited available mass for analysis. Size exclusion chromatography and Fourier transform infrared spectroscopy were suitable methods for the identification of a mixture of compounds, most appropriately containing natural resins based on aliphatic esters and carboxylic acids. The IR spectra of the Peperomia and Roridula adhesive resemble each other; they correspond to that of a synthetic ethylene-vinyl acetate copolymer, but slightly differ from that of natural tree resins. Thus, the pressure sensitive adhesive properties of the plant adhesives are chemically proved. Such adhesives seem to appear independently in distantly related plant lineages, habitats, life forms, as well as plant organs, and serve different functions such as prey capture in Roridula and fruit dispersal in Peperomia. However, more detailed chemical analyses still remain challenging because of the small available volume of plant adhesive.

Broad-Spectrum Antimicrobial Star Polycarbonates Functionalized with Mannose for Targeting Bacteria Residing inside Immune Cells

In this study, a series of star-shaped polycarbonates are synthesized by metal-free organocatalytic ring-opening polymerization of benzyl chloride (BnCl) and mannose-functionalized cyclic carbonate monomers (MTC-BnCl and MTC-ipman) with heptakis-(2,3-di-O-acetyl)-β-cyclodextrin (DA-β-CD) as macroinitiator. The distributions and compositions of pendent benzyl chloride and protected mannose group (ipman) units are facilely modulated by varying the polymerization sequence and feed ratio of the monomers, allowing precise control over the molecular composition, and the resulting polymers have narrow molecular weight distribution. After deprotection of ipman groups and quaternization with various N,N-dimethylalkylamines, these star polymers with optimized compositions of cationic and mannose groups in block and random forms exhibit strong bactericidal activity and low hemolysis. Furthermore, the optimal mannose-functionalized polymer demonstrates mannose receptor-mediated intracellular bactericidal activity against BCG mycobacteria without inducing cytotoxicity on mammalian cells at the effective dose. Taken together, the materials designed in this study have potential use as antimicrobial agents against diseases such as tuberculosis, which is caused by intracellular bacteria.

Ultrafast Killing and Self-Gelling Antimicrobial Imidazolium Oligomers

Infectious diseases and the increasing threat of worldwide pandemics have underscored the importance of antibiotics and hygiene. Intensive efforts have been devoted to developing new antibiotics to meet the rapidly growing demand. In particular, advancing the knowledge of the structure-property-activity relationship is critical to expedite the design and development of novel antimicrobial with the needed potential and efficacy. Herein, a series of new antimicrobial imidazolium oligomers are developed with the rational manipulation of terminal group's hydrophobicity. These materials exhibit superior activity, excellent selectivity, ultrafast killing (>99.7% killing within 30 s), and desirable self-gelling properties. Molecular dynamic simulations reveal the delicate effect of structural changes on the translocation motion across the microbial cell membrane. The energy barrier of the translocation process analyzed by free energy calculations provides clear kinetic information to suggest that the spontaneous penetration requires a very short timescale of seconds to minutes for the new imidazolium oligomers.

Role of charged lipids in membrane structures - Insight given by simulations

Lipids and proteins are the main components of cell membranes. It is becoming increasingly clear that lipids, in addition to providing an environment for proteins to work in, are in many cases also able to modulate the structure and function of those proteins. Particularly charged lipids such as phosphatidylinositols and phosphatidylserines are involved in several examples of such effects. Molecular dynamics simulations have proved an invaluable tool in exploring these aspects. This so-called computational microscope can provide both complementing explanations for the experimental results and guide experiments to fruitful directions. In this paper, we review studies that have utilized molecular dynamics simulations to unravel the roles of charged lipids in membrane structures. We focus on lipids as active constituents of the membranes, affecting both general membrane properties as well as non-lipid membrane components, mainly proteins. This article is part of a Special Issue entitled: Biosimulations edited by Ilpo Vattulainen and Tomasz Róg.

NH125 kills methicillin-resistant Staphylococcus aureus persisters by lipid bilayer disruption

BACKGROUND

NH125, a known WalK inhibitor kills MRSA persisters. However, its precise mode of action is still unknown.

METHODS & RESULTS

The mode of action of NH125 was investigated by comparing its spectrum of antimicrobial activity and its effects on membrane permeability and giant unilamellar vesicles (GUVs) with walrycin B, a WalR inhibitor and benzyldimethylhexadecylammonium chloride (16-BAC), a cationic surfactant. NH125 killed persister cells of a variety of Staphylococcus aureus strains. Similar to 16-BAC, NH125 killed MRSA persisters by inducing rapid membrane permeabilization and caused the rupture of GUVs, whereas walrycin B did not kill MRSA persisters or induce membrane permeabilization and did not affect GUVs.

CONCLUSION

NH125 kills MRSA persisters by interacting with and disrupting membranes in a detergent-like manner.

Cyclization and unsaturation rather than isomerisation of side chains govern the selective antibacterial activity of cationic-amphiphilic polymers

The influence of cyclization and unsaturation on the hydrophobic side chains of cationic-amphiphilic polymers towards antibacterial activity and mammalian cell toxicity is reported.

Homopolymer bifunctionalization through sequential thiol–epoxy and esterification reactions: an optimization, quantification, and structural elucidation study

In this study, we probe various aspects of a post-polymerization double-modification strategy involving sequential thiol–epoxy and esterification reactions for the preparation of dual-functional homopolymers.

Functionalised nanoparticles complexed with antibiotic efficiently kill MRSA and other bacteria

Antibiotic-resistant bacterial infections are a vexing global health problem and have rendered ineffective many previously-used antibiotics. Here we demonstrate that antibiotic-linkage to surface-functionalized silica nanoparticles (sNP) significantly enhances their effectiveness against Escherichia coli, and Staphylococcus aureus, and even methicillin-resistant S. aureus (MRSA) strains that are resistant to most antibiotics. The commonly-used antibiotic penicillin-G (PenG) was complexed to dye-labeled sNPs (15 nm diameter) containing carboxyl groups located as either surface-functional groups, or on polymer-chains extending from surfaces. Both sNPs configurations efficiently killed bacteria, including MRSA strains. This suggests that activities of currently-ineffective antibiotics can be restored by nanoparticle-complexation and used to avert certain forms of antibiotic-resistance.