Expanding the Reticular Chemistry Building Block Library toward Highly Connected Nets: Ultraporous MOFs Based on 18-Connected Ternary, Trigonal Prismatic Superpolyhedra

The chemistry of metal-organic frameworks (MOFs) continues to expand rapidly, providing materials with diverse structures and properties. The reticular chemistry approach, where well-defined structural building blocks are combined together to form crystalline open framework solids, has greatly accelerated the discovery of new and important materials. However, its full potential toward the rational design of MOFs relies on the availability of highly connected building blocks because these greatly reduce the number of possible structures. Toward this, building blocks with connectivity greater than 12 are highly desirable but extremely rare. We report here the discovery of novel 18-connected, trigonal prismatic, ternary building blocks (tbb's) and their assembly into unique MOFs, denoted as Fe-tbb-MOF-x (x: 1, 2, 3), with hierarchical micro- and mesoporosity. The remarkable tbb is an 18-c supertrigonal prism, with three points of extension at each corner, consisting of triangular (3-c) and rectangular (4-c) carboxylate-based organic linkers and trigonal prismatic [Fe3(μ3-Ο)(-COO)6]+ clusters. The tbb's are linked together by an 18-c cluster made of 4-c ligands and a crystallographically distinct Fe3(μ3-Ο) trimer, forming overall a 3-D (3,4,4,6,6)-c five nodal net. The hierarchical, highly porous nature of Fe-tbb-MOF-x (x: 1, 2, 3) was confirmed by recording detailed sorption isotherms of Ar, CH4, and CO2 at 87, 112, and 195 K, respectively, revealing an ultrahigh BET area (4263-4847 m2 g-1) and pore volume (1.95-2.29 cm3 g-1). Because of the observed ultrahigh porosities, the H2 and CH4 storage properties of Fe-tbb-MOF-x were investigated, revealing well-balanced high gravimetric and volumetric deliverable capacities for cryoadsorptive H2 storage (11.6 wt %/41.4 g L-1, 77 K/100 bar-160 K/5 bar), as well as CH4 storage at near ambient temperatures (367 mg g-1/160 cm3 STP cm-3, 5-100 bar at 298 K), placing these materials among the top performing MOFs. The present work opens new directions to apply reticular chemistry for the construction of novel MOFs with tunable porosities based on contracted or expanded tbb analogues.

Anion-encapsulating, discrete prism and extended frusta, from trimetallated triangular macrocycles and linkers

Reaction of a trinuclear triangular macrocyclic complex Pb3L(CF3SO3)6 with bidentate linkers in a ratio of 3 equiv. of linker per 2 equiv. of complex, produces a prismatic structure with 4,4'-dipyridyl, and two unprecedented, extended 3D frustum-like structures with 1,2-di(4-pyridyl)ethylene and 1,4-di(4-pyridyl)benzene. The cavities of these structures encapsulate triflate anions.

Induced Production of Atypical Naturally Nonpreferred Metal-Organic Frameworks and Their Detachment via Provoking Post-Mismatching

The structures of metal-organic frameworks (MOFs) are typically determined by the building blocks that compose them and the conditions under which they are formed. MOFs tend to adopt a thermodynamically and/or kinetically stable structure (naturally preferred form). Thus, constructing MOFs with naturally nonpreferred structures is a challenging task, as it requires avoiding the easier pathway toward a naturally preferred MOF. Herein, an approach to construct naturally nonpreferred dicarboxylate-linked MOFs employing reaction templates is reported. This strategy relies on the registry between the surface of the template and the cell lattice of a target MOF, which reduces the effort required to form naturally nonpreferred MOFs. Reactions of p-block trivalent metal ions (Ga3+ and In3+ ) with dicarboxylic acids typically produce preferred MIL-53 or MIL-68. However, the surface of UiO-67 (and UiO-66) template exhibits the well-defined hexagonal lattice, which induce the selective formation of a naturally nonpreferred MIL-88 structure. Inductively grown MIL-88s are purely isolated from the template via provoking a post-mismatch in their lattices and weakening the interfacial interaction between product and template. It is also discovered that an appropriate template for effective induced production of naturally nonpreferred MOFs shall be properly selected based on the cell lattice of a target MOF.

Supramolecular isomerism and structural flexibility in coordination networks sustained by cadmium rod building blocks

Bifunctional N-donor carboxylate linkers generally afford dia and sql topology coordination networks of general formula ML₂ that are based upon the MN₂(CO₂)₂ molecular building block (MBB). Herein, we report on a new N-donor carboxylate linker, β-(3,4-pyridinedicarboximido)propionate (PyImPr), which afforded Cd(PyImPr)₂via reaction of PyImPrH with Cd(acetate)₂·2H₂O. We observed that, depending upon whether Cd(PyImPr)₂ was prepared by layering or solvothermal methods, 2D or 3D supramolecular isomers, respectively, of Cd(PyImPr)₂ were isolated. Single crystal X-ray diffraction studies revealed that both supramolecular isomers are comprised of the same carboxylate bridged rod building block, RBB. We were interested to determine if the ethylene moiety of PyImPr could enable structural flexibility. Indeed, open-to-closed structural transformations occurred upon solvent removal for both phases, but they were found to be irreversible. A survey of the Cambridge Structural Database (CSD) was conducted to analyse the relative frequency of RBB topologies in related ML₂ coordination networks in order to provide insight from a crystal engineering perspective.

A zirconium metal-organic framework with SOC topological net for catalytic peptide bond hydrolysis

The discovery of nanozymes for selective fragmentation of proteins would boost the emerging areas of modern proteomics, however, the development of efficient and reusable artificial catalysts for peptide bond hydrolysis is challenging. Here we report the catalytic properties of a zirconium metal-organic framework, MIP-201, in promoting peptide bond hydrolysis in a simple dipeptide, as well as in horse-heart myoglobin (Mb) protein that consists of 153 amino acids. We demonstrate that MIP-201 features excellent catalytic activity and selectivity, good tolerance toward reaction conditions covering a wide range of pH values, and importantly, exceptional recycling ability associated with easy regeneration process. Taking into account the catalytic performance of MIP-201 and its other advantages such as 6-connected Zr₆ cluster active sites, the green, scalable and cost-effective synthesis, and good chemical and architectural stability, our findings suggest that MIP-201 may be a promising and practical alternative to commercially available catalysts for peptide bond hydrolysis.

Developing efficient and reusable artificial catalysts for peptide bond hydrolysis is challenging. This work presents the catalytic properties of a Zr-MOF, MIP-201, which features excellent catalytic activity and selectivity, good condition tolerance, and exceptional recycling ability.

A (3,8)-Connected Metal-Organic Framework with Bending Dicarboxylate Linkers for C2H2/CO2 Separation

Herein, by replacement of the linear terephthalate linker with the bending 2,5-thiophenedicarboxylate (tdc^2-) linker in the typical (3,9)-connected metal-organic framework, with a reduced 8-connected hydroxyl-centered trinuclear cluster, a new (3,8)-connected network, [Ni₃(μ₃-OH)(tdc)₃(tpp)] [DZU-1; tpp = 2,4,6-tris(4-pyridyl)pyridine], was synthesized. The modified pore environment enables DZU-1 to selectively adsorb C₂H₂ over CO₂ in an efficient manner.

Amide-Functionalized Metal-Organic Frameworks Coupled with Open Fe/Sc Sites for Efficient Acetylene Purification

Acetylene (C₂H₂) purification is of great importance for many chemical synthesis and processes. Metal-organic frameworks (MOFs) are widely used for gas adsorption and separation due to their variable structure and porosity. However, the exploitation of ideal MOF adsorbents for C₂H₂ keeps a challenging task. Herein, a combination of open metal sites (OMSs) and Lewis basic sites (LBSs) in robust MOFs is demonstrated to effectively promote the C₂H₂ purification performance. Accordingly, SNNU-37(Fe/Sc), two isostructural MOFs constituted by [Fe₃O(COO)₆] or [Sc₃O(COO)₆] trinuclear clusters and amide-functionalized tricarboxylate linkers, were designed with extra-stable 3,6-connected new architectures. Derived from the coexistence of high-density OMSs and LBSs, the C₂H₂ adsorption amounts of SNNU-37(Fe/Sc) are much higher than those values for C₂H₄ and CO₂. Theoretical IAST selectivity values of SNNU-37(Fe) are 2.4 for C₂H₂/C₂H₄ (50/50, v/v) and 9.9 for C₂H₂/CO₂ (50/50, v/v) at 298 K and 1 bar, indicating an excellent C₂H₂ separation ability. Experimental breakthrough curves also revealed that SNNU-37(Fe) could effectively separate C₂H₂/C₂H₄ and C₂H₂/CO₂ under ambient conditions. GCMC simulations further indicate that open Fe or Sc sites and amide groups mainly contribute to stronger adsorption sites for C₂H₂ molecules.

Lattice-Guided Construction and Harvest of a Naturally Nonpreferred Metal-Organic Framework

Constructing metal-organic frameworks (MOFs) to have a desired structure from the given components is critical to achieve ideal MOFs with optimal properties. However, thermodynamics and/or kinetics typically impose a restriction on MOF structures. Here, we report the MOF farming concept to produce a naturally nonpreferred structure from the given components. The HKUST-1 template offers ideal places for the efficient seeding and epitaxial growth of Ga-MIL-88B that is a naturally nonpreferred structure however intentionally produced instead of the preferred Ga-MIL-68. The MOF growth on the differently shaped HKUST-1 templates (octahedral, cuboctahedral, and cubic), containing different exposed lattices, proves that a hexagonal lattice with an exposed {111} plane of HKUST-1 selectively directs the perpendicular growth of Ga-MIL-88B, owing to the lattice matching with the {001} plane of Ga-MIL-88B. The grown Ga-MIL-88B is isolated in a pure form, and the refreshed template is reused to grow additional Ga-MIL-88B.

Metal-organic frameworks of linear trinuclear cluster secondary building units: structures and applications

Secondary building units (SBUs) in metal-organic frameworks (MOFs) are essential from both a structural and performance perspective. While a variety of SBUs, such as paddlewheel CuII2, triangular CrIII3, tetrahedral ZnII4, and octahedral ZrIV6 have been extensively studied, the linear trinuclear SBUs (herein denoted as M₃), though frequently encountered, are rarely discussed as a class. A literature survey reveals that M₃ clusters are ubiquitous in discrete molecular entities as well as in MOFs. Unlike most other cluster types, however, they have an unprecedented metal diversity and ligand tolerance. The single-crystals of some M₃-based MOFs are also sufficiently robust upon guest removal and exchange or multi-step post-modifications to enable catalytic mechanism elucidation. Some of these M₃-based SBUs endow MOFs with stability under demanding conditions necessary, for example, in flue gas separation. Herein we review MOFs sustained by this common but under-appreciated class of SBUs and discuss applications of the resulting MOF motifs.

Ultrastable High-Connected Chromium Metal-Organic Frameworks

State-of-the-art MOFs are generally known for chemical stability at one end of the pH scale (i.e., pH < 0 or pH > 14). Herein, we report new Cr-MOFs capable of withstanding extreme pH conditions across approximately 16 pH units from pH < 0 to pH > 14, likely the largest observed pH range for MOFs. The integration of multiple stability-enhancing factors including nonlabile Cr³⁺, mixed Cr-N and Cr-O cross-links, and the highest possible connectivity by Cr₃O trimers enables extraordinary chemical stability confirmed by both PXRD and gas adsorption. Notably, the base stability is much higher than literature Cr-MOFs, thereby revitalizing Cr-MOF's viability in the pursuit for the most chemically stable MOFs. Among known cationic MOFs, the chemical stability of these new Cr-MOFs is unmatchable, to our knowledge. These Cr-MOFs can be developed into multiseries of isoreticular MOFs with a rich potential for functionalization, pore size, and pore geometry engineering and applications.

Chemically Stable Metal-Organic Frameworks: Rational Construction and Application Expansion

Metal-organic frameworks (MOFs) have been attracting tremendous attention owing to their great structural diversity and functional tunability. Despite numerous inherent merits and big progress in the fundamental research (synthesizing new compounds, discovering new structures, testing associated properties, etc.), poor chemical stability of most MOFs severely hinders their involvement in practical applications, which is the final goal for developing new materials. Therefore, constructing new stable MOFs or stabilizing extant labile MOFs is quite important. As with them, some "potential" applications would come true and a lot of new applications under harsh conditions can be explored. Efficient strategies are being pursued to solve the stability problem of MOFs and thereby achieve and expand their applications.In this Account, we summarize the research advance in the design and synthesis of chemically stable MOFs, particularly those stable in acidic, basic, and aqueous systems, as well as in the exploration of their applications in several expanding fields of environment, energy, and food safety, which have been dedicated in our lab over the past decade. The strategies for accessing stable MOFs can be classified into: (a) assembling high-valent metals (hard acid, such as Zr⁴⁺, Al³⁺) with carboxylate ligands (hard base) for acid-stable MOFs; (b) combining low-valent metals (soft acid, such as Co²⁺, Ni²⁺) and azolate ligands (soft base, such as pyrazolate) for alkali-resistant MOFs; (c) enhancing the connectivity of the building unit; (d) contracting or rigidifying the ligand; (e) increasing the hydrophobicity of the framework; and (f) substituting liable building units with stable ones (such as metal metathesis) to obtain robust MOFs. In addition, other factors, including the geometry and symmetry of building units, framework-framework interaction, and so forth, have also been taken into account in the design and synthesis of stable MOFs. On the basis of these approaches, the stability of resulting MOFs under corresponding conditions has been remarkably enhanced.With high chemical stability achieved, the MOFs have found many new and significant applications, aiming at addressing global challenges related to environmental pollution, energy shortage, and food safety.A series of stable MOFs have been constructed for detecting and eliminating contaminations. Various fluorescent MOFs were rationally customized to be powerful platforms for sensing hazardous targets in food and water, such as dioxins, antibiotics, veterinary drugs, and heavy metal ions. Some hydrophobic MOFs even showed effective and specific capture of low-concentration volatile organic compounds.Novel MOFs with record-breaking acid/base/nucleophilic regent resistance have expanded their application scope under harsh conditions. BUT-8(Cr)A, as the most acid-stable MOF yet, showed reserved structural integrity in concentrated H₂SO₄ and recorded high proton conductivity; the most alkali-resistant MOF, PCN-601, retained crystallinity even in boiling saturated NaOH aqueous solution, and such base-stable MOFs composed of non-noble metal clusters and poly pyrazolate ligands also demonstrated great potential in heterogeneous catalysis in alkaline/nucleophilic systems for the first time.It is believed that this Account will provide valuable references on stable MOFs' construction as well as application expansion toward harsh conditions, thereby being helpful to promote MOF materials to step from fundamental research to practical applications.

Tunable Metal-Organic Frameworks Based on 8-Connected Metal Trimers for High Ethane Uptake

Metal trimers [M₃ (O/OH)](OOCR)₆ are among the most important structural building blocks. From these trimers, a great success has been achieved in the design of 6- or 9-connected framework materials with various topological features and outstanding gas-sorption properties. In comparison, 8-connected trimer-based metal-organic frameworks (MOFs) are rare. Given multiple competitive pathways for the formation of 6- or 9-connected frameworks, it remains challenging to identify synthetic or structural parameters that can be used to direct the self-assembly process toward trimer-based 8-connected materials. Here, a viable strategy called angle bending modulation is revealed for creating a prototypical MOF type based on 8-connected M₃ (OH)(OOCR)₅ (Py-R)₃ trimers (M = Zn, Co, Fe). As a proof of concept, six members in this family are synthesized using three types of ligands (CPM-80, -81, and -82). These materials do not possess open-metal sites and show excellent uptake capacity for various hydrocarbon gas molecules and inverse C₂ H₆ /C₂ H₄ selectivity. CPM-81-Co, made from 2,5-furandicarboxylate and isonicotinate, features selectivity of 1.80 with high uptake capacity for ethane (123 cm³ g^-1 ) and ethylene (113 cm³ g^-1 ) at 298 K and 1 bar.

Novel nano network trigonal prismatic Ba2CoO4-deficient BaCoO3 for high-affinity sorption of radiolanthanide elements of biomedical applications: synthesis and sorption studies

Nano trigonal prismatic Ba2CoO4 with hierarchical structure and deficient BaCoO3 with columnar structure have been prepared at low temperatures (400 [BC4] and 500 [BC5]) °C/3h using green method. X-ray diffraction (XRD) results demonstrate the presence of enriched Ba2CoO4 phase at 400 °C and multiphase structures: BaCoO3, BaCoO3-δ, and Co3O4 with a decrease in the amount of Ba2CoO4 at 500 °C. The prepared powders are characterized by a high specific surface area (SSA) values which are reflected to the mode of synthesis that leads to produce materials with massive active sites. The SSA of BC4 is higher than that of BC5 which can be correlated to the difference in the microstructure analysis of BC4 and BC5 as given from scanning electron microscope (SEM) and high-resolution transmission electron microscope (HRTEM) studies. Electron spin resonance (ESR) spectroscopy as an effective method for the characterization of vacancy-rich nanostructures indicates that the presence of oxygen vacancies is related mainly to BaCoO3, BaCoO3-δ, and Co3O4 phases while the effective oxygen vacancies is in BaCoO3 and BaCoO3-δ. The nanocrystalline structures of BC4 and BC5 as novel nano-adsorbents are the first time to be tested. Production of Gd radioisotopes through natGd(n,γ)153,159,161Gd and carrier-free 161Tb through 160Gd(n,γ,) 161Gd [Formula: see text] 161Tb are achieved at 2nd Egyptian nuclear research reactor (ETRR-2). Preliminary sorption study of Gd radioisotopes (represent the lanthanide elements) shows a promising material for the application in the separation and removal of lanthanide elements. The results demonstrated that the fast interaction and efficient sorption of lanthanides ions are based on the novel synthesized nanomaterial that can be considered for the upscale application in this field.

A window-space-directed assembly strategy for the construction of supertetrahedron-based zeolitic mesoporous metal-organic frameworks with ultramicroporous apertures for selective gas adsorption

Despite their scarcity due to synthetic challenges, supertetrahedron-based metal-organic frameworks (MOFs) possess intriguing architectures, diverse functionalities, and superb properties that make them in-demand materials. Employing a new window-space-directed assembly strategy, a family of mesoporous zeolitic MOFs have been constructed herein from corner-shared supertetrahedra based on homometallic or heterometallic trimers [M3(OH/O)(COO)6] (M3 = Co3, Ni3 or Co2Ti). These MOFs consisted of close-packed truncated octahedral cages possessing a sodalite topology and large β-cavity mesoporous cages (∼22 Å diameter) connected by ultramicroporous apertures (∼5.6 Å diameter). Notably, the supertetrahedron-based sodalite topology MOF combined with the Co2Ti trimer exhibited high thermal and chemical stability as well as the ability to efficiently separate acetylene (C2H2) from carbon dioxide (CO2).

A {Na2Fe10} isobutyrate cluster, interlinked into 1D chains

The coordination cluster [Na₂Fe₁₀O₆(OH)₄(isobutyrate)₁₄(MeO)₂(MeCN)₂], derived from a {Fe₃(μ₃-O)(isobutyrate)₆} precursor, features a cluster shell of corner-sharing {Fe₃(μ₃-O)} motifs, capped by two sodium ions.

3D Cage COFs: A Dynamic Three-Dimensional Covalent Organic Framework with High-Connectivity Organic Cage Nodes

Three-dimensional (3D) covalent organic frameworks (COFs) are rare because there is a limited choice of organic building blocks that offer multiple reactive sites in a polyhedral geometry. Here, we synthesized an organic cage molecule (Cage-6-NH₂) that was used as a triangular prism node to yield the first cage-based 3D COF, 3D-CageCOF-1. This COF adopts an unreported 2-fold interpenetrated acs topology and exhibits reversible dynamic behavior, switching between a small-pore (sp) structure and a large-pore (lp) structure. It also shows high CO₂ uptake and captures water at low humidity (<40%). This demonstrates the potential for expanding the structural complexity of 3D COFs by using organic cages as the building units.

A Heterometallic Three-Dimensional Metal-Organic Framework Bearing an Unprecedented One-Dimensional Branched-Chain Secondary Building Unit

A heterometallic metal−organic framework (MOF) of [Cd₆Ca₄(BTB)₆(HCOO)₂(DEF)₂(H₂O)₁₂]∙DEF∙xSol (1, H₃BTB = benzene-1,3,5-tribenzoic acid; DEF = N,N′-diethylformamide; xSol. = undefined solvates within the pore) was prepared by solvothermal reaction of Cd(NO₃)₂·4H₂O, CaO and H₃BTB in a mixed solvent of DEF/H₂O/HNO₃. The compatibility of these two divalent cations from different blocks of the periodic table results in a solid-state structure consisting of an unusual combination of a discrete V-shaped heptanuclear cluster of [Cd₂Ca]₂Ca′ and an infinite one-dimensional (1D) chain of [Cd₂CaCa′]_n that are orthogonally linked via a corner-shared Ca²⁺ ion (denoted as Ca′), giving rise to an unprecedented branched-chain secondary building unit (SBU). These SBUs propagate via tridentate BTB to yield a three-dimensional (3D) structure featuring a corner-truncated P4₁ helix in MOF 1. This outcome highlights the unique topologies possible via the combination of carefully chosen s- and d-block metal ions with polydentate ligands.

Hydrophobic Metal-Organic Frameworks: Assessment, Construction, and Diverse Applications

Tens of thousands of metal-organic frameworks (MOFs) have been developed in the past two decades, and only ≈100 of them have been demonstrated as porous and hydrophobic. These hydrophobic MOFs feature not only a rich structural variety, highly crystalline frameworks, and uniform micropores, but also a low affinity toward water and superior hydrolytic stability, which make them promising adsorbents for diverse applications, including humid CO2 capture, alcohol/water separation, pollutant removal from air or water, substrate-selective catalysis, energy storage, anticorrosion, and self-cleaning. Herein, the recent research advancements in hydrophobic MOFs are presented. The existing techniques for qualitatively or quantitatively assessing the hydrophobicity of MOFs are first introduced. The reported experimental methods for the preparation of hydrophobic MOFs are then categorized. The concept that hydrophobic MOFs normally synthesized from predesigned organic ligands can also be prepared by the postsynthetic modification of the internal pore surface and/or external crystal surface of hydrophilic or less hydrophobic MOFs is highlighted. Finally, an overview of the recent studies on hydrophobic MOFs for various applications is provided and suggests the high versatility of this unique class of materials for practical use as either adsorbents or nanomaterials.

Mimic of Ferroalloy To Develop a Bifunctional Fe-Organic Framework Platform for Enhanced Gas Sorption and Efficient Oxygen Evolution Electrocatalysis

It is well-known that the formation of ferroalloy with the addition of the second or third metal during the steel-making process usually can improve the performance of the iron. Inspired by ferroalloy materials, it is speculated that the pore environment, framework charge, and catalytic properties of metal-organic frameworks (MOFs) could be optimized dramatically via the introduction of ferroalloy-like inorganic building blocks. However, different to ferroalloy, the accurate integration of different metals into one MOF platform is still challenging. Herein, taking advantages of the good compatibility for metals in trigonal prismatic trinuclear cluster, a series of Fe-based alloy-like [M₃O(O₂C)₆] motifs (M₃ = Fe₃, Fe_1.5Ni_1.5, Fe_1.5Co_1.5, Fe_1.5Ti_1.5, FeCoNi, and FeTiCo) are successfully generated, which further lead to a robust Fe-MOF material family (SNNU-5s). These multicomponent MOFs not only provide a good chance to explore the impact of pore environment on gas adsorption/separation but also offer an opportunity to the efficient electrocatalytic reaction directly. Accordingly, compared with the SNNU-5-Fe parent structure, the pore characters of heterometallic SNNU-5 MOFs are clearly regulated by the type of alloy-like building blocks. SNNU-5-FeTi displays more superior gas separation performance for CO₂/CH₄, C₂H₂/CH₄, C₂H₄/CH₄, and C₂H₂/CO₂ gas mixtures. What is more, benefited from the multimetallic active sites and their catalytic synergy, FeCoNi-ternary alloy-like cluster-based SNNU-5 MOF material exhibits an exceptional oxygen evolution reaction activity in aqueous solution at pH = 13, which delivers a low overpotential (η_j=10 = 317 mV), a fast reaction kinetics (Tafel slope = 37 mV dec^-1), and excellent catalytic stability. This facile multialloy-like building block strategy holds promise to accurately design and improve the performance of MOFs, as well as open an avenue to understand the related mechanisms.

Existence of untypical halogen-involving interactions in crystal packings: a statistical and first-principles study

There is a common perception by the scientific community that a halogen-involving interaction forms when the distance between the donor atom and the acceptor atom is less than the sum of their van der Waals (vdW) radii.

The Chemistry of Nucleation: In Situ Pair Distribution Function Analysis of Secondary Building Units During UiO-66 MOF Formation

The concept of secondary building units (SBUs) is central to all science on metal-organic frameworks (MOFs), and they are widely used to design new MOF materials. However, the presence of SBUs during MOF formation remains controversial, and the formation mechanism of MOFs remains unclear, due to limited information about the evolution of prenucleation cluster structures. Here in situ pair distribution function (PDF) analysis was used to probe UiO-66 formation under solvothermal conditions. The expected SBU-a hexanuclear zirconium cluster-is present in the metal salt precursor solution. Addition of organic ligands results in a disordered structure with correlations up to 23 Å, resembling crystalline UiO-66. Heating leads to fast cluster aggregation, and further growth and ordering results in the crystalline product. Thus, SBUs are present already at room temperature and act as building blocks for MOF formation. The proposed formation steps provide insight for further development of MOF synthesis.

Development of a new Lindqvist-like Fe6 cluster secondary building unit for MOFs

In this work, a novel Lindqvist-like Fe6 cluster was introduced as an SBU to construct a new family of Fe-cluster organic frameworks.

A superstable 3p-block metal–organic framework platform towards prominent CO2 and C1/C2-hydrocarbon uptake and separation performance and strong Lewis acid catalysis for CO2 fixation

Superstable 3p-block MOF platforms exhibit excellent gas uptake and separation performance, and prominent Lewis acid catalysis for CO₂ fixation.

All-Inorganic Ionic Porous Material Based on Giant Spherical Polyoxometalates Containing Core-Shell K6 @K36 -Water Cage

This work demonstrates that the use of high-negative and high-symmetry lacunary polyoxometalates (POMs) for the clustering of alkali metal ions is a feasible strategy not only for the formation of rare high-nuclearity alkali-metal clusters but also for the construction of new-type all-inorganic ionic porous materials. By the strategy, an unprecedented high-nuclearity K-H₂ O cluster {K₄₂ (H₂ O)₆₀ } with core-shell K₆ @K₃₆ configuration is stabilized by 8 C_3v -symmetry trivacant POMs [GeW₉ O₃₄ ]^10- , forming a novel giant ionic alkali-metal-POM composite cluster {K₄₂ Ge₈ W₇₂ O₂₇₂ (H₂ O)₆₀ } with more than 100 metal centers. The incorporated 42-nuclearity K-H₂ O cluster {K₄₂ (H₂ O)₆₀ } exhibits the highest-nuclearity alkali-metal-water cluster known to date in POM chemistry. Further, the giant {K₄₂ Ge₈ W₇₂ O₂₇₂ (H₂ O)₆₀ } clusters can be linked by another kind of alkali metal ions Na⁺ to generate a fascinating three-dimensional all-inorganic ionic porous framework with high chemical stability, proton conductivity, and water vapor adsorption.

Redox-Active Cobalt(II/III) Metal-Organic Framework for Selective Oxidation of Cyclohexene

We report herein a new cobalt(II/III) mixed-valence metal-organic framework formulated as [Co^IICo₂^III(μ₃-O)(bdc)₃(tpt)]·guest 1, where bdc = benzene-1,4-dicarboxylate and tpt = 2,4,6-tri(4-pyridinyl)-1,3,5-triazine, which can be used as a redox-active heterogeneous catalyst for selective oxidation of cyclohexene on the allylic position without destroying the adjacent double bond. Two oxidants were chosen to demonstrate this result. For using tert-butyl hydroperoxide, the conversion rate is 63% and only allylic oxidation products ( tert-butyl-2-cyclohexenyl-1-peroxide, 86%; 2-cyclohexen-1-one, 14%) are found, whereas if using O₂ as oxidant, a total conversion of 38% is achieved and also only the allylic oxidation products (cyclohexenyl hydroperoxide, 72%; 2-cyclohexen-1-one, 20%; and cyclohex-2-en-1-ol, 8%) are found. The absence of any adduct on the double bond may be due to the unique radical chain mechanism triggered by the mixed-valent [Co^IICo₂^III(μ₃-O)] centers.

Exploitation of knowledge databases in the synthesis of zinc(II) malonates with photo-sensitive and photo-insensitive N,N'-containing linkers

Photoinitiated solid-state reactions are known to affect the physical properties of coordination polymers, such as fluorescence and sorption behaviour, and also afford extraordinary architectures (e.g. three-periodic structures with polyorganic ligands). However, the construction of novel photo-sensitive coordination polymers requires an understanding of the factors which govern the mutual disposition of reactive fragments. A series of zinc(II) malonate complexes with 1,2-bis(pyridin-4-yl)ethylene and its photo-insensitive analogues has been synthesized for the purpose of systematic analysis of their underlying nets and mutual disposition of N-donor ligands. The application of a big data-set analysis for the prediction of a variety of possible complex compositions, coordination environments and networks for a four-component system has been demonstrated for the first time. Seven of the nine compounds possess one of the highly probable topologies for their underlying nets; in addition, two novel closely related four-coordinated networks were obtained. Complexes containing 1,2-bis(pyridin-4-yl)ethylene and 1,2-bis(pyridin-4-yl)ethane form isoreticular compounds more readily than those with 4,4'-bipyridine and 1,2-bis(pyridin-4-yl)ethylene. The effects of the precursor, either zinc(II) nitrate or zinc(II) acetate, on the composition and dimensionality of the resulting architecture are discussed. For three of the four novel complexes containing 1,2-bis(pyridin-4-yl)ethylene, the single-crystal-to-single-crystal [2 + 2] cycloaddition reactions were carried out. UV irradiation of these crystals afforded either the 0D→1D or the 3D→3D transformations, with and without network changes. One of the two 3D→3D transformations was accompanied by solvent (H₂O) cleavage.

Self-Assembly of a [1 + 1] Ionic Hexagonal Macrocycle and Its Antiproliferative Activity

A unique irregular hexagon was self-assembled using an organic donor clip (bearing terminal pyridyl units) and a complementary organometallic acceptor clip. The resulting metallamacrocycle was characterized by multinuclear NMR, mass spectrometry, and elemental analyses. Molecular modeling confirmed hexagonal shaped cavity for this metallamacrocycle which is a unique example of a discrete hexagonal framework self-assembled from only two building blocks. Cytotoxicity of the Pt-based acceptor tecton and the self-assembled Pt^II-based macrocycle was evaluated using three cancer cell lines and results were compared with cisplatin. Results confirmed a positive effect of the metallamacrocycle formation on cell growth inhibition.

A new metal–organic framework constructed from cationic nodes and cationic linkers for highly efficient anion exchange

A novel cationic MOF combining cationic nodes with cationic linkers has been constructed. With its unique structural features, this MOF is highly efficient in anion exchangeability.

Sulfur-containing bimetallic metal organic frameworks with multi-fold helix as anode of lithium ion batteries

A novel sulfur-containing bimetallic MOF with helix has been successfully synthesized and further serves as an anode with prominent specific capacity and remarkable cycling stability for LIBs.

Controllable synthesis of isoreticular pillared-layer MOFs based on N-rich triangular prism building units: gas adsorption and luminescent properties

Isoreticular 1–4 MOFs with rare lon topologies have been rationally synthesized based on novel trigonal-prism building units.