Functionalized graphene-based biomimetic microsensor interfacing with living cells to sensitively monitor nitric oxide release

Electrochemical Detection of Gasotransmitters: Status and Roadmap

Gasotransmitters, including nitric oxide (NO), carbon monoxide (CO), and hydrogen sulfide (H2S), are a class of gaseous, endogenous signaling molecules that interact with one another in the regulation of critical cardiovascular, immune, and neurological processes. The development of analytical sensing mechanisms for gasotransmitters, especially multianalyte mechanisms, holds vast importance and constitutes a growing area of study. This review provides an overview of electrochemical sensing mechanisms with an emphasis on opportunities in multianalyte sensing. Electrochemical methods demonstrate good sensitivity, adequate selectivity, and the most well-developed potential for the multianalyte detection of gasotransmitters. Future research will likely address challenges with sensor stability and biocompatibility (i.e., sensor lifetime and cytotoxicity), sensor miniaturization, and multianalyte detection in biological settings.

Graphene nanocomposites for real-time electrochemical sensing of nitric oxide in biological systems

Nitric oxide (NO) signaling plays many pivotal roles impacting almost every organ function in mammalian physiology, most notably in cardiovascular homeostasis, inflammation, and neurological regulation. Consequently, the ability to make real-time and continuous measurements of NO is a prerequisite research tool to understand fundamental biology in health and disease. Despite considerable success in the electrochemical sensing of NO, challenges remain to optimize rapid and highly sensitive detection, without interference from other species, in both cultured cells and in vivo. Achieving these goals depends on the choice of electrode material and the electrode surface modification, with graphene nanostructures recently reported to enhance the electrocatalytic detection of NO. Due to its single-atom thickness, high specific surface area, and highest electron mobility, graphene holds promise for electrochemical sensing of NO with unprecedented sensitivity and specificity even at sub-nanomolar concentrations. The non-covalent functionalization of graphene through supermolecular interactions, including π-π stacking and electrostatic interaction, facilitates the successful immobilization of other high electrolytic materials and heme biomolecules on graphene while maintaining the structural integrity and morphology of graphene sheets. Such nanocomposites have been optimized for the highly sensitive and specific detection of NO under physiologically relevant conditions. In this review, we examine the building blocks of these graphene-based electrochemical sensors, including the conjugation of different electrolytic materials and biomolecules on graphene, and sensing mechanisms, by reflecting on the recent developments in materials and engineering for real-time detection of NO in biological systems.

An Fe-organic framework/arginine-glycine-aspartate peptide-modified sensor for electrochemically detecting nitric oxide released from living cells

Nitric oxide (NO) is a crucial cell-signaling molecule utilized in numerous physiological and pathological processes. Monitoring cellular levels of NO requires a sensor with sufficient sensitivity, transient recording capability, and biocompatibility. Owing to the large surface area and high catalytic activity of the metal-organic framework, Fe-BTC was used for the modification of screen-printed electrodes (SPEs). This study investigates the electrochemical sensing of NO on modified SPEs. Additionally, the introduction of a cell-adhesive molecule, arginine-glycine-aspartate peptide (RGD), considerably improved the cytocompatibility, resulting in superior cell attachment and growth on the SPE. The Fe-BTC/RGD-modified SPE (Fe-BTC/RGD/SPE) exhibited electrocatalytic NO oxidation at 0.8 V, demonstrating a linear response with a detection limit of 11.88 nM over a wide concentration range (0.17-47.37 μM) and a response time of approximately 0.9 s. Subsequently, the as-obtained Fe-BTC/RGD/SPE was successfully utilized for the real-time detection of NO released from human endothelial cells cultured on the electrode. Therefore, the study undertaken shows remarkable potential of Fe-BTC/RGD/SPE for practical applications in biological processes and clinical diagnostics.

Flexible and Stretchable Electrochemical Sensors for Biological Monitoring

The rise of flexible and stretchable electronics has revolutionized biosensor techniques for probing biological systems. Particularly, flexible and stretchable electrochemical sensors (FSECSs) enable the in situ quantification of numerous biochemical molecules in different biological entities owing to their exceptional sensitivity, fast response, and easy miniaturization. Over the past decade, the fabrication and application of FSECSs have significantly progressed. This review highlights key developments in electrode fabrication and FSECSs functionalization. It delves into the electrochemical sensing of various biomarkers, including metabolites, electrolytes, signaling molecules, and neurotransmitters from biological systems, encompassing the outer epidermis, tissues/organs in vitro and in vivo, and living cells. Finally, considering electrode preparation and biological applications, current challenges and future opportunities for FSECSs are discussed.

In situ growth of a cobalt porphyrin-based covalent organic framework on multi-walled carbon nanotubes for ultrasensitive real-time monitoring of living cell-released nitric oxide

Nitric oxide (NO), as a critical transcellular messenger, participates in a variety of physiological and pathological processes. However, its real-time detection still faces challenges due to its short half-life and trace amounts. Here, MWCNTs@COF-366-Co was prepared by in situ growth of a cobalt porphyrin-based covalent organic framework (COF-366-Co) on multi-walled carbon nanotubes (MWCNTs), and a unique biosensing platform for ultrasensitive real-time NO determination was established. Remarkably, MWCNTs@COF-366-Co contains plenty of atomically arranged M-N4 active sites for electrocatalysis, which provides more efficient electron transfer pathways and resolves the random arrangement issue of active sites. COF-366-Co with a high surface area contains a large number of exposed active M-N4 sites, providing faster NO transport/diffusion and more efficient electron transfer pathways. Due to the synergy of atomic-level periodic structural features of COF-366-Co and high conductivity of MWCNTs, the MWCNTs@COF-366-Co electrochemical biosensor exhibited excellent NO determination performance in a wide range from 0.09 to 400 μM, with high sensitivity (8.9 μA μM-1 cm-2) and a low limit of detection (16 nM). Moreover, the biosensor has been successfully used to sensitively monitor NO molecules released from human umbilical vein endothelial cells (HUVECs). This research not only designed a multifunctional intelligent biosensor platform, but also provided a broad prospect for continuous dynamic monitoring of the activity of living cells and their released metabolites.

Rational Design of Cu-Doped Tetrahedron of Spinel Oxide for High-Performance Nitric Oxide Electrochemical Sensor

The real-time detection of nitric oxide (NO) in living cells is essential to reveal its physiological processes. However, the popular electrochemical detection strategy is limited to the utilization of noble metals. The development of new detection candidates without noble metal species still maintaining excellent catalytic performance has become a big challenge. Herein, we propose a spinel oxide doped with heteroatom-Cu-doped Co₃O₄ (Cu-Co₃O₄) for the sensitive and selective detection of NO release from the living cells. The material is strategically designed with Cu occupying the tetrahedral (T_d) center of Co₃O₄ through the formation of a Cu-O bond. The introduced Cu regulates the local coordination environment and optimizes the electronic structure of Co₃O₄, hybridizing with the N 2p orbital to enhance charge transfer. The Cu_Td site can well inhibit the current response to nitrite (NO₂^-), resulting in a high improvement in the electrochemical oxidation of NO. The selectivity of Cu-Co₃O₄ can be markedly improved by the pore size of the molecular sieve and the negative charge on the surface. The rapid transmission of electrons is due to the fact that Cu-Co₃O₄ can be uniformly and densely in situ grown on Ti foil. The rationally designed Cu-Co₃O₄ sensor displays excellent catalytic activity toward NO oxidation with a low limit of detection of 2.0 nM (S/N = 3) and high sensitivity of 1.9 μA nM^-1 cm^-2 in cell culture medium. The Cu-Co₃O₄ sensor also shows good biocompatibility to monitor the real-time NO release from living cells (human umbilical vein endothelial cells: HUVECs; macrophage: RAW 264.7 cells). It was found that a remarkable response to NO was obtained in different living cells when stimulated by l-arginine (l-Arg). Moreover, the developed biosensor could be used for real-time monitoring of NO released from macrophages polarized to a M1/M2 phenotype. This cheap and convenient doping strategy shows universality and can be used for sensor design of other Cu-doped transition metal materials. The Cu-Co₃O₄ sensor presents an excellent example through the design of proper materials to implement unique sensing requirements and sheds light on the promising strategy for electrochemical sensor fabrication.

Rapid real-time monitoring of NO released from living cells using multi-walled carbon nanotube-7,7,8,8-tetracyanoquinonedimethyl-polylysine sensors

Nitric oxide (NO) is an important but short-lived signaling molecule that is released from living cells. Real-time monitoring of NO release is useful for understanding normal cellular physiology and pathology. Herein, a convenient and efficient NO sensor was developed using multiwalled carbon nanotubes (MWCNTs)-7,7,8,8-tetracyanoquinodimethan (TCNQ)-polylysine (PLL) modified screen-printed electrode (SPE). The construction of the sensor (MWCNTs/TCNQ/PLL/SPE) was based on the synergic effect of the good conductivity of TCNQ and the high surface area of MWCNTs. The introduction of the cell-adhesive molecule PLL significantly enhanced the cytocompatibility, resulting in excellent cell attachment and growth. The resulting MWCNTs/TCNQ/PLL/SPE was successfully used for the real-time detection of NO released from living human umbilical vein endothelial cells (HUVECs) cultured on it. The MWCNTs/TCNQ/PLL/SPE was further used to detect NO release from oxidative-injured HUVECs with and without resveratrol to also preliminarily assess the effect of resveratrol against oxidative damage. The sensor developed in this study showed good performance for the real-time detection of NO released by HUVECs under different conditions and has potential applications in the diagnosis of biological processes and the screening of drug treatment effects.

Planar carbon electrodes for real-time quantification of hydrogen sulfide release from cells

A planar electrode system was developed to permit the real-time, selective detection of hydrogen sulfide (H₂S) from stimulated cells. Planar carbon electrodes were produced via stencil printing carbon ink through a laser cut vinyl mask. Electrodes were preconditioned using a constant potential amperometry methodology to prevent sensor drift resulting from elemental sulfur adsorption. Modification with a bilaminar coating (electropolymerized ortho-phenylenediamine and a fluorinated xerogel) facilitated high selectivity to H₂S. To demonstrate the biological application of this planar sensor system, H₂S released from 17β-estradiol-stimulated human umbilical vein endothelial cells (HUVECs) was quantified in situ in real-time. Stimulated HUVECs released sustained H₂S levels for hours before returning to baseline. Cellular viability assays demonstrated negligible cell cytotoxicity at the electrochemical potentials required for analysis.

The Roadmap of Graphene-Based Sensors: Electrochemical Methods for Bioanalytical Applications

Graphene (GR) has engrossed immense research attention as an emerging carbon material owing to its enthralling electrochemical (EC) and physical properties. Herein, we debate the role of GR-based nanomaterials (NMs) in refining EC sensing performance toward bioanalytes detection. Following the introduction, we briefly discuss the GR fabrication, properties, application as electrode materials, the principle of EC sensing system, and the importance of bioanalytes detection in early disease diagnosis. Along with the brief description of GR-derivatives, simulation, and doping, classification of GR-based EC sensors such as cancer biomarkers, neurotransmitters, DNA sensors, immunosensors, and various other bioanalytes detection is provided. The working mechanism of topical GR-based EC sensors, advantages, and real-time analysis of these along with details of analytical merit of figures for EC sensors are discussed. Last, we have concluded the review by providing some suggestions to overcome the existing downsides of GR-based sensors and future outlook. The advancement of electrochemistry, nanotechnology, and point-of-care (POC) devices could offer the next generation of precise, sensitive, and reliable EC sensors.

Structural and functional imaging of brains

Analyzing the complex structures and functions of brain is the key issue to understanding the physiological and pathological processes. Although neuronal morphology and local distribution of neurons/blood vessels in the brain have been known, the subcellular structures of cells remain challenging, especially in the live brain. In addition, the complicated brain functions involve numerous functional molecules, but the concentrations, distributions and interactions of these molecules in the brain are still poorly understood. In this review, frontier techniques available for multiscale structure imaging from organelles to the whole brain are first overviewed, including magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography (PET), serial-section electron microscopy (ssEM), light microscopy (LM) and synchrotron-based X-ray microscopy (XRM). Specially, XRM for three-dimensional (3D) imaging of large-scale brain tissue with high resolution and fast imaging speed is highlighted. Additionally, the development of elegant methods for acquisition of brain functions from electrical/chemical signals in the brain is outlined. In particular, the new electrophysiology technologies for neural recordings at the single-neuron level and in the brain are also summarized. We also focus on the construction of electrochemical probes based on dual-recognition strategy and surface/interface chemistry for determination of chemical species in the brain with high selectivity and long-term stability, as well as electrochemophysiological microarray for simultaneously recording of electrochemical and electrophysiological signals in the brain. Moreover, the recent development of brain MRI probes with high contrast-to-noise ratio (CNR) and sensitivity based on hyperpolarized techniques and multi-nuclear chemistry is introduced. Furthermore, multiple optical probes and instruments, especially the optophysiological Raman probes and fiber Raman photometry, for imaging and biosensing in live brain are emphasized. Finally, a brief perspective on existing challenges and further research development is provided.

Electrochemical microwell sensor with Fe-N co-doped carbon catalyst to monitor nitric oxide release from endothelial cell spheroids

Endothelial cells have been widely used for vascular biology studies; recent progress in tissue engineering have offered three-dimensional (3D) culture systems for vascular endothelial cells which can be considered as physiologically relevant models. To facilitate the studies, we developed an electrochemical device to detect nitric oxide (NO), a key molecule in the vasculature, for the evaluation of 3D cultured endothelial cells. Using an NO-sensitive catalyst composed of Fe-N co-doped reduced graphene oxide, the real-time monitoring of NO release from the endothelial cell spheroids was demonstrated.

CarbonIron Electron Transport Channels in Porphyrin-Graphene Complex for ppb-Level Room Temperature NO Gas Sensing

It is a great challenge to develop efficient room-temperature sensing materials and sensors for nitric oxide (NO) gas, which is a biomarker molecule used in the monitoring of inflammatory respiratory diseases. Herein, Hemin (Fe (III)-protoporphyrin IX) is introduced into the nitrogen-doped reduced graphene oxide (N-rGO) to obtain a novel sensing material HNG-ethanol. Detailed XPS spectra and DFT calculations confirm the formation of carbon-iron bonds in HNG-ethanol during synthesis process, which act as electron transport channels from graphene to Hemin. Owing to this unique chemical structure, HNG-ethanol exhibits superior gas sensing properties toward NO gas (R_a /R_g  = 3.05, 20 ppm) with a practical limit of detection (LOD) of 500 ppb and reliable repeatability (over 5 cycles). The HNG-ethanol sensor also possesses high selectivity against other exhaled gases, high humidity resistance, and stability (less than 3% decrease over 30 days). In addition, a deep understanding of the gas sensing mechanisms is proposed for the first time in this work, which is instructive to the community for fabricating sensing materials based on graphene-iron derivatives in the future.

Recent Advances in Phthalocyanine and Porphyrin-Based Materials as Active Layers for Nitric Oxide Chemical Sensors

Nitric oxide (NO) is a highly reactive toxic gas that forms as an intermediate compound during the oxidation of ammonia and is used for the manufacture of hydroxylamine in the chemical industry. Moreover, NO is a signaling molecule in many physiological and pathological processes in mammals, as well as a biomarker indicating the course of inflammatory processes in the respiratory tract. For this reason, the detection of NO both in the gas phase and in the aqueous media is an important task. This review analyzes the state of research over the past ten years in the field of applications of phthalocyanines, porphyrins and their hybrid materials as active layers of chemical sensors for the detection of NO, with a primary focus on chemiresistive and electrochemical ones. The first part of the review is devoted to the study of phthalocyanines and porphyrins, as well as their hybrids for the NO detection in aqueous solutions and biological media. The second part presents an analysis of works describing the latest achievements in the field of studied materials as active layers of sensors for the determination of gaseous NO. It is expected that this review will further increase the interest of researchers who are engaged in the current level of evaluation and selection of modern materials for use in the chemical sensing of nitric oxide.

A three-dimensional hydrogel-modified indium tin oxide electrode with enhanced performance for in situ electrochemical detection of extracellular H2O2

Two different electrochemical sensors (Hemin-G4/Au/GCE and Hemin-G4/Au/ITO) were developed and applied to explore the electrocatalytic capacity of H₂O₂ reduction. Due to the excellent catalytic activity of Hemin-G4 and high conductivity of gold nanoparticles, both electrodes show excellent electrochemical performances towards H₂O₂ with a low LOD (0.67 μM for Hemin-G4/Au/GCE and 0.65 μM for Hemin-G4/Au/ITO), rapid response (<4 s), and high selectivity and sensitivity (314.33 μA mM^-1 cm^-2 for Hemin-G4/Au/GCE and 322.22 μA mM^-1 cm^-2 for Hemin-G4/Au/ITO). The two electrodes allow sensitive capture of H₂O₂ produced by A549 cells. Compared with the conventional method of detection in cell suspensions, an ITO electrode with a large specific surface area and good biocompatibility can provide a promising platform for cell adhesion, so as to realize real-time and in situ detection of extracellular H₂O₂. The experimental results show that A549 cells can adhere to the surface of the Hemin-G4/Au/ITO electrode and grow well. This is benefitted from the three-dimensional structure of the Hemin-G4/Au hydrogel, which provides a suitable microenvironment for cell adhesion and growth. Furthermore, the in situ detection shows a faster response time than that of in-solution detection. This is because the H₂O₂ generated by the cells can be directly captured by the ITO electrode, which avoids diffusion from the solution to the electrode. These results indicate that the self-supporting hydrogel modified ITO electrode has great application prospects in basic biomedical research and continuous dynamic surveillance of diseases.

CuO/Cu-MOF nanocomposite for highly sensitive detection of nitric oxide released from living cells using an electrochemical microfluidic device

The integration of large surface area and high catalytic profiles of Cu-MOF and CuO nanoparticles is described toward electrochemical sensing of nitric oxide (NO) in a microfluidic platform. The CuO/Cu-MOF nanocomposite was prepared through hydrothermal method, and its formation was confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and energy-dispersive X-ray spectroscopy (EDS). The CuO/Cu-MOF nanostructured modified Au electrodes enabled electrocatalytic NO oxidation at 0.6 V vs. reference electrode, demonstrating linear response over a broad concentration range of 0.03-1 μM and 1-500 μM with a detection limit of 7.8 nM. The interference effect of organic molecules and common ions was negligible, and the sensing system demonstrated excellent stability. Finally, an electrochemical microfluidic NO sensor was developed to detect of NO released from cancer cells, which were stimulated by L-arginine. Furthermore, in the presence of Fe³⁺, the stressed cells produced more NO. This work offers considerable potential for its practical applications in clinical diagnostics through determination of chemical symptoms in microliter-volume biological samples. Electrochemical microfluidic NO sensor was developed for detection of NO released from cancer cells. This miniaturized device consumes less materials and provides the basis for greener analytical chemistry.

Sensing Nitric Oxide in Cells: Historical Technologies and Future Outlook

Nitric oxide (NO) is a critical cell signaling molecule with important roles in both normal cellular physiology and pathology. Over the past 20 years, multiple sensing modalities have been developed for the intracellular synthesis (endogenous) and release (exogenous) of NO. In this review, we survey the historical progression of NO sensing platforms, highlight the current state of the art, and offer a forward-looking view of how we expect the field of NO sensing to develop in the context of recent advances in bio-nanotechnology and nanoscale cellular biosensors.

Novel Cells-Based Electrochemical Sensor for Investigating the Interactions of Cancer Cells with Molecules and Screening Multitarget Anticancer Drugs

A novel, effective, and label-free electrochemical sensor was constructed for investigating the interactions between cancer cells and molecules, based on targeted cancer cells immobilized on a bilayer architecture of N-doped graphene-Pt nanoparticles-chitosan (NGR-Pt-CS) and polyaniline (PANI). The interactions between folic acid (FA, positive control) and dimethyl sulfoxide (DMSO, negative control) and the choice of targeted cells, HepG2 and A549 cells, were investigated by measuring the current change of the sensor to [Fe(CN)₆]^3-/4- before and after interactions, and the binding constants were calculated to be 1.37 × 10⁵ and 1.92 × 10⁵ M^-1 by sensing kinetics. Furthermore, 18 main components from Aidi injection (ADI) were studied to screen compounds that have interactions with different targeted cancer cells including HepG2 and A549 cells. The potential target groups of the interactions between screened active compounds and targeted cancer cells were analyzed through computer-aided molecular docking. In this sensing system, molecules did not require electrochemical activity, and different targeted cancer cells could be immobilized on the modified electrode surface, truly reflecting the categories and numbers of targets. Additionally, the proposed sensor specifically circumvented the current paradigm in most cells-based electrochemical sensors for screening drugs, in which the changes in cell behavior induced by drugs are monitored. This study provided a novel, simple, and generally applicable method for exploring the interaction of molecules with cancer cells and screening multitarget drugs.

2D materials in electrochemical sensors for in vitro or in vivo use

Individual cells and cell populations are at the present time investigated with a myriad of analytical tools. While most of them are commercially available, some of these analytical tools are just emerging from research laboratories and are in the developmental phase. Electrochemical sensors which allow the monitoring of low molecular weight compounds released (and / or uptaken) by cells are among these emerging tools. Such sensors are increasingly built using 2D materials (e.g. graphene-based materials, transition metal dichalcogenides, etc.) with the aim of conferring better analytical performances to these devices. The present work critically reviews studies published during the last 10 years describing electrochemical sensors made with 2D materials and exploited to monitor small compounds (e.g. H₂O₂, ·NO, glucose, etc.) in living biological systems. It also discusses the very few 2D material-based electrochemical sensors which are wearable or usable in vivo. Finally, the present work includes a specific section about 2D material biocompatibility, a fundamental requirement for 2D material-based sensor applications in vitro and in vivo. As such, the review provides a critical view on the state of the art of electrochemical sensors made with 2D materials and used at cellular level and it evaluates the possibility that such sensors will be used on / in the human body on a wider scale.

2-Amino-3'-dialkylaminobiphenyl-based fluorescent intracellular probes for nitric oxide surrogate N2O3

Fluorescent probes for nitric oxide (NO), or more frequently for its oxidized surrogate dinitrogen trioxide (N2O3), have enabled scientists to study the contributions of this signaling molecule to many physiological processes. Seeking to improve upon limitations of other probes, we have developed a family of fluorescent probes based on a 2-amino-3'-dialkylaminobiphenyl core. This core condenses with N2O3 to form benzo[c]cinnoline structures, incorporating the analyte into the newly formed fluorophore, which results in product fluorescence with virtually no background contribution from the initial probe. We varied the substituents in the core in order to optimize both the reactivity of the probes with N2O3 and their cinnoline products' fluorescence wavelengths and brightness. The top candidates were then applied to cultured cells to verify that they could respond to NO within cellular milieus, and the top performer, NO530, was compared with a "gold standard" commercial probe, DAF-FM, in a macrophage-derived cell line, RAW 264.7, stimulated to produce NO. NO530 demonstrated similar or better sensitivity and higher selectivity for NO than DAF, making it an attractive potential alternative for NO tracking in various applications.

New Disposable Nitric Oxide Sensor Fabrication Using GaN Nanowires

Gallium nitride (GaN) nanowires anchored on the surface of cost-effective pencil graphite electrodes (PGEs) have been developed as a new disposable nitric oxide (NO) sensor through a hydrothermal method followed by annealing treatment. The as-obtained nanomaterials were examined by field emission scanning electron microscopy, high-resolution transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and EIS. Concurrently, the electrocatalytic performance has been analyzed using cyclic voltammetry and amperometric measurements. The experimental results exhibit good electrochemical sensing performance toward the generated NO in NO2 - with a wide linear detection range of 1.0 μM to 1.0 mM with a correlation coefficient of 0.999 and a detection limit of 0.180 μM. In addition, the GaN nanowire-modified PGE surface showed high selectivity for the detection of NO as compared to other relevant biomolecules. This confirms that the PGE/GaN nanowire is a new promising electrochemical sensor for the sensitive detection of NO.

A multi-component Cu2O@FePO4 core-cage structure to jointly promote fast electron transfer toward the highly sensitive in situ detection of nitric oxide

Electrochemical sensors actually involve an electrocatalytic process in efficient and selective energy conversion. In this work, we use different components to innovatively produce a core@cage material, in which the outer cage, iron phosphate, offers a high electrocatalytic ability to electrochemically oxidize NO, while the inner material, cuprous oxide, could absorb the intermediary HO- ions to kinetically promote NO oxidation for fast electron transfer, resulting in a strong synergistic effect. The unique core@cage structure also increases the active surface area and provides plenty of channels via the porous cage for significantly enhanced mass transport. The as-prepared core@cage NO sensor shows a high sensitivity of 326.09 μA cm-2 μM-1, which is the highest among the reported non-noble metal-based NO biosensors based on the electrooxidation scheme. A free-standing flexible NO sensor was further fabricated with the material for the in situ detection of NO released from cancer cells, demonstrating a low detection limit (0.45 nM) and a fast response time (0.8 s). This work holds great promise for its practical applications in the diagnosis or research of complicated biological processes, especially in real-time in situ detection approaches.

DNA-Templated In Situ Synthesis of Highly Dispersed AuNPs on Nitrogen-Doped Graphene for Real-Time Electrochemical Monitoring of Nitric Oxide Released from Live Cancer Cells

Dispersion promotion of nanomaterials can significantly enhance their catalytic activities. With a new DNA-templated in situ synthesis approach, we report the preparation of highly dispersed AuNPs on nitrogen-doped graphene sheets (NGS) with significantly improved electrocatalytic ability for the monitoring of nitric oxide (NO) released from live cancer cells. The template DNA is adsorbed on NGS via π-π stacking, and the Au precursor chelates along the DNA lattice through dative bonding. Subsequent introduction of the reducing agent leads to in situ nucleation and growth of AuNPs, eventually resulting in highly dispersed AuNPs on NGS. Because of the synergistic enhancement of the catalytic activities of AuNPs and NGS, as well as the high dispersion of AuNPs, such a nanocomposite shows significant electro-oxidation capability toward NO, leading to a highly sensitive subnanomolar detection limit for NO in vitro. More importantly, the laminin glycoproteins can be readily adsorbed on the surface of the nanomaterials to render excellent biocompatibility for the adhesion and proliferation of live cells, enabling the biointerface for electrochemical detection of NO released from live cancer cells.

Cellular Signaling Pathways Activated by Functional Graphene Nanomaterials

The paper reviews the network of cellular signaling pathways activated by Functional Graphene Nanomaterials (FGN) designed as a platform for multi-targeted therapy or scaffold in tissue engineering. Cells communicate with each other through a molecular device called signalosome. It is a transient co-cluster of signal transducers and transmembrane receptors activated following the binding of transmembrane receptors to extracellular signals. Signalosomes are thus efficient and sensitive signal-responding devices that amplify incoming signals and convert them into robust responses that can be relayed from the plasma membrane to the nucleus or other target sites within the cell. The review describes the state-of-the-art biomedical applications of FGN focusing the attention on the cell/FGN interactions and signalosome activation.

Iron Phthalocyanine Decorated Nitrogen-Doped Graphene Biosensing Platform for Real-Time Detection of Nitric Oxide Released from Living Cells

Nitric oxide (NO) is a transcellular messenger involved in many physiological and pathological processes, but the real-time detection of NO in biological systems is still challenging due to its rapid diffusion, low concentration, and short half-life. A novel electrochemical sensing platform based on iron phthalocyanine (FePc) functionalized nitrogen-doped graphene (N-G) nanocomposites was constructed to achieve in situ monitoring of NO released from living cells on the sensing layer. By taking advantage of the synergetic effect of N-G and FePc nanocomposites, the N-G/FePc sensor displays excellent electrocatalytic activity toward NO with a high sensitivity of 0.21 μA μM^-1 cm^-2 and a low detection limit of 180 nmol L^-1. The following layer-by-layer assembly of poly-l-lysine (PLL) and Nafion further improved the capacity of resisting disturbance as well as the biocompatibility of the sensing interface. The flexible design of the ITO substrate based electrode provides a more controlled cellular biosensing system which could capture molecular signals immediately after NO released from human umbilical vein endothelial cells (HUVECs). The exhibited additional features of high sensitivity, rapid response, and ease of operation implies that the proposed N-G/FePc/Nafion/PLL ITO biosensor is a promising powerful platform in various complex biological systems.

Synthesis, physicochemical and optical properties of bis-thiosemicarbazone functionalized graphene oxide

Fluorescent materials are important for low-cost opto-electronic and biomedical sensor devices. In this study we present the synthesis and characterization of graphene modified with bis-thiosemicarbazone (BTS). This new material was characterized using Fourier transform infrared spectroscopy (FT-IR), Ultraviolet-visible (UV-Vis) and Raman spectroscopy techniques. Further evaluation by X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic-force microscopy (AFM) allowed us to fully characterize the morphology of the fabricated material. The average height of the BTSGO sheet is around 10nm. Optical properties of BTSGO evaluated by photoluminescence (PL) spectroscopy showed red shift at different excitation wavelength compared to graphene oxide or bisthiosemicarbazide alone. These results strongly suggest that BTSGO material could find potential applications in graphene based optoelectronic devices.

Porphyrins in troubled times: a spotlight on porphyrins and their metal complexes for explosives testing and CBRN defense

A critical perspective on (metallo)porphyrins in security-related applications: the past, present and future of explosives detection, CBRN defense, and beyond.

A sensitive acupuncture needle microsensor for real-time monitoring of nitric oxide in acupoints of rats

This study reports an acupuncture needle modified with an iron-porphyrin functionalized graphene composite (FGPC) for real-time monitoring of nitric oxide (NO) release in acupoints of rats. A gold film was first deposited to the needle surface to enhance the conductivity. The FGPC was prepared via hydrothermal synthesis, and subsequently applied to the tip surface of acupuncture needle by electrochemical deposition method. The functionalized needle enabled a specific and sensitive detection of NO based on the favorably catalytic properties of iron-porphyrin and the excellent conductivity of graphene. Amperometric data showed that the needle achieved not only a low detection limit down to 3.2 nM in PBS solution, but also a satisfactory selectivity. Interestingly, the functionalized needle could be inserted into the acupoints of rats for real-time monitoring of NO in vivo. It was found that a remarkable response to NO was respectively obtained in different acupoints when stimulated by _L-arginine (_L-Arg), revealing that the release of NO was detectable in acupoints. We expect this work would showcase the applications of acupuncture needle in detecting some important signaling molecules in vivo, and exploring the mechanism of acupuncture treatment.

Detection of Nitric Oxide from Living Cells Using Polymeric Zinc Organic Framework-Derived Zinc Oxide Composite with Conducting Polymer

Sensitive and selective detection of nitric oxide (NO) in the human body is crucial since it has the vital roles in the physiological and pathological processes. This study reports a new type of electrochemical NO biosensor based on zinc-dithiooxamide framework derived porous ZnO nanoparticles and polyterthiophene-rGO composite. By taking advantage of the synergetic effect between ZnO and poly(TTBA-rGO) (TTBA = 3'-(p-benzoic acid)-2,2':5',2″-terthiophene, rGO = reduced graphene oxide) nanocomposite layer, the poly(TTBA-rGO)/ZnO sensor probe displays excellent electrocatalytic activity and explores to detect NO released from normal and cancer cell lines. The ZnO is immobilized on a composite layer of poly(TTBA-rGO). The highly porous ZnO offers a high electrolyte accessible surface area and high ion-electron transport rates that efficiently catalyze the NO reduction reaction. Amperometry with the modified electrode displays highly sensitive response and wide dynamic range of 0.019-76 × 10^-6 m with the detection limit of 7.7 ± 0.43 × 10^-9 m. The sensor probe is demonstrated to detect NO released from living cells by drug stimulation. The proposed sensor provides a powerful platform for the low detection limit that is feasible for real-time analysis of NO in a biological system.

Acoustic cavitation induced generation of stabilizer-free, extremely stable reduced graphene oxide nanodispersion for efficient delivery of paclitaxel in cancer cells

Graphene is one of the highly explored nanomaterials due to its unique and extraordinary properties. In this study, by utilizing a hydrothermal reduction method, graphene oxide (GO) was successfully converted to reduced graphene oxide (RGO) without using any toxic reducing agents. Following this, with the use of ultrasonic cavitation, profoundly stable few layer thick RGO nanodispersion was generated without employing any stabilizers or surfactants. During ultrasonication, shockwaves from the collapse of bubbles cause a higher dispersing energy to the graphene nanosheets which surpass the forces of Van der Waal's and π-π stacking and thus pave the way to form a stable aqueous nanodispersion of graphene. Ultrasonication systems with different power intensity have been employed to determine the optimum conditions for obtaining the most stable RGO dispersion. The optimised conditions of ultrasonic treatments led to the development of a very stable reduced graphene oxide (RGO) aqueous dispersion. The stability was observed for two years and was analyzed by using Zetasizer by measuring the particle size and zeta potential at regular intervals and found to have exceptional stability. The excellent stability at physiological pH promotes its utilization in nano drug delivery application as a carrier for Paclitaxel (Ptx), an anticancer drug. The in vitro cytotoxicity analysis of Ptx loaded RGO nanodispersion by MTT assay performed on the cell lines revealed the potential of the nanodispersion as a suitable drug carrier. Studies on normal lung cells, MRC-5 and nasopharyngeal cancer cells, HK-1 supported the biocompatibility of RGO-Ptx towards normal cell line. This investigation shows the potential of exceptionally stable RGO-Ptx nanodispersion in nano drug delivery applications.

Functional Graphene Nanomaterials Based Architectures: Biointeractions, Fabrications, and Emerging Biological Applications

Functional graphene nanomaterials (FGNs) are fast emerging materials with extremely unique physical and chemical properties and physiological ability to interfere and/or interact with bioorganisms; as a result, FGNs present manifold possibilities for diverse biological applications. Beyond their use in drug/gene delivery, phototherapy, and bioimaging, recent studies have revealed that FGNs can significantly promote interfacial biointeractions, in particular, with proteins, mammalian cells/stem cells, and microbials. FGNs can adsorb and concentrate nutrition factors including proteins from physiological media. This accelerates the formation of extracellular matrix, which eventually promotes cell colonization by providing a more beneficial microenvironment for cell adhesion and growth. Furthermore, FGNs can also interact with cocultured cells by physical or chemical stimulation, which significantly mediate their cellular signaling and biological performance. In this review, we elucidate FGNs-bioorganism interactions and summarize recent advancements on designing FGN-based two-dimensional and three-dimensional architectures as multifunctional biological platforms. We have also discussed the representative biological applications regarding these FGN-based bioactive architectures. Furthermore, the future perspectives and emerging challenges will also be highlighted. Due to the lack of comprehensive reviews in this emerging field, this review may catch great interest and inspire many new opportunities across a broad range of disciplines.

Porphyrinoids for Chemical Sensor Applications

Porphyrins and related macrocycles have been intensively exploited as sensing materials in chemical sensors, since in these devices they mimic most of their biological functions, such as reversible binding, catalytic activation, and optical changes. Such a magnificent bouquet of properties allows applying porphyrin derivatives to different transducers, ranging from nanogravimetric to optical devices, also enabling the realization of multifunctional chemical sensors, in which multiple transduction mechanisms are applied to the same sensing layer. Potential applications are further expanded through sensor arrays, where cross-selective sensing layers can be applied for the analysis of complex chemical matrices. The possibility of finely tuning the macrocycle properties by synthetic modification of the different components of the porphyrin ring, such as peripheral substituents, molecular skeleton, coordinated metal, allows creating a vast library of porphyrinoid-based sensing layers. From among these, one can select optimal arrays for a particular application. This feature is particularly suitable for sensor array applications, where cross-selective receptors are required. This Review briefly describes chemical sensor principles. The main part of the Review is divided into two sections, describing the porphyrin-based devices devoted to the detection of gaseous or liquid samples, according to the corresponding transduction mechanism. Although most devices are based on porphyrin derivatives, seminal examples of the application of corroles or other porphyrin analogues are evidenced in dedicated sections.

Sonochemical and sustainable synthesis of graphene-gold (G-Au) nanocomposites for enzymeless and selective electrochemical detection of nitric oxide

In this study, a sonochemical approach was utilised for the development of graphene-gold (G-Au) nanocomposite. Through the sonochemical method, simultaneous exfoliation of graphite and the reduction of gold chloride occurs to produce highly crystalline G-Au nanocomposite. The in situ growth of gold nanoparticles (AuNPs) took place on the surface of exfoliated few-layer graphene sheets. The G-Au nanocomposite was characterised by UV-vis, XRD, FTIR, TEM, XPS and Raman spectroscopy techniques. This G-Au nanocomposite was used to modify glassy carbon electrode (GCE) to fabricate an electrochemical sensor for the selective detection of nitric oxide (NO), a critical cancer biomarker. G-Au modified GCE exhibited an enhanced electrocatalytic response towards the oxidation of NO as compared to other control electrodes. The electrochemical detection of NO was investigated by linear sweep voltammetry analysis, utilising the G-Au modified GCE in a linear range of 10-5000μM which exhibited a limit of detection of 0.04μM (S/N=3). Furthermore, this enzyme-free G-Au/GCE exhibited an excellent selectivity towards NO in the presence of interferences. The synergistic effect of graphene and AuNPs, which facilitated exceptional electron-transfer processes between the electrolyte and the GCE thereby improving the sensing performance of the fabricated G-Au modified electrode with stable and reproducible responses. This G-Au nanocomposite introduces a new electrode material in the sensitive and selective detection of NO, a prominent biomarker of cancer.

Hydrothermally functionalized biocompatible nitrogen doped graphene nanosheet based biomimetic platforms for nitric oxide detection

Hydrothermal synthesis of nanocomposites is of significant importance, as it affords facile, biocompatible, nontoxic, and economic fabrication. Herein, we report a hitherto unexplored cytocompatible and reusable biomimetic electrochemical sensor based on pyridyl porphyrin functionalized nitrogen doped graphene nanosheets. The porphyrin functionalized nitrogen doped graphene nanosheets (PFNGS) were prepared by a low temperature hydrothermal method via non-covalent strategies with a minimal impact on their physicochemical properties. Owing to their exceptional attributes like operational ease, low cost, portability, and sensitivity, the as-synthesized PFNGS, formed by π-π interactions, were employed for sensing nitric oxide (NO), which is a key regulator of diverse biological processes. Compared to porphyrin and nitrogen doped graphene nanosheets alone, PFNGS exhibited exceptional sensitivity (3.6191 μA μM^-1) and remarkable electrocatalytic properties (0.61 V). This clearly outperforms the previously reported modified electrode materials for the electrochemical detection of NO. Cyclic voltammetry (CV) data also suggested that the PFNGS modified electrode possessed an increased reactive surface area, which results in an increase in the number of reactive sites and low charge transfer resistance. These results also demonstrated that the PFNGS modified electrode showed high stability and reproducibility, the limit of detection (LOD) (S/N = 3) of which was estimated to be 1 nM. Our PFNGS were found to be highly biocompatible and could also detect NO released from macrophage cells. This blend of biocompatibility, electrode stability, electrocatalytic activity along with enhanced sensitivity and selectivity makes PFNGS a powerful and reliable nanomaterial for various biomedical applications in complex biological systems.

SERS nanoprobes for the monitoring of endogenous nitric oxide in living cells

Nitric Oxide (NO) is a significant gaseous signalling molecule in various pathological and physiological pathways, whereas many of its functions are still ambiguous in part because of the shortage of powerful detection approaches. Herein, we present a type of reaction-based surface-enhanced Raman scattering (SERS) nanoprobes, o-phenylenediamine-modified gold nanoparticles (AuNPs/OPD), to detect the level of the endogenous NO in living cells. The detection is achieved through the SERS variation of AuNPs/OPD caused by the reaction between NO and OPD on the surface of AuNPs. The proposed SERS nanoprobes have a good stability and a rapid response to NO within 30s Moreover, as a result of the reaction specificity coupled with SERS fingerprinting, AuNPs/OPD nanoprobes demonstrate high selectivity towards NO over other biologically relevant species with a sensitivity at 10(-7)M level. Thereby, this SERS strategy can be used for monitoring NO that is endogenously produced in living macrophages, indicating immense potential in studying NO-involved pathophysiological processes in biological systems.

Photochemical Synthesis of Shape-Controlled Nanostructured Gold on Zinc Oxide Nanorods as Photocatalytically Renewable Sensors

Biosensors always suffer from passivation that prevents their reutilization. To address this issue, photocatalytically renewable sensors composed of semiconductor photocatalysts and sensing materials have emerged recently. In this work, we developed a robust and versatile method to construct different kinds of renewable biosensors consisting of ZnO nanorods and nanostructured Au. Via a facile and efficient photochemical reduction, various nanostructured Au was obtained successfully on ZnO nanorods. As-prepared sensors concurrently possess excellent sensing capability and desirable photocatalytic cleaning performance. Experimental results demonstrate that dendritic Au/ZnO composite has the strongest surface-enhanced Raman scattering (SERS) enhancement, and dense Au nanoparticles (NPs)/ZnO composite has the highest electrochemical activity, which was successfully used for electrochemical detection of NO release from cells. Furthermore, both of the SERS and electrochemical sensors can be regenerated efficiently for renewable applications via photodegrading adsorbed probe molecules and biomolecules. Our strategy provides an efficient and versatile method to construct various kinds of highly sensitive renewable sensors and might expand the application of the photocatalytically renewable sensor in the biosensing area.

Stretchable Electrochemical Sensor for Real-Time Monitoring of Cells and Tissues

Stretchable electrochemical sensors are conceivably a powerful technique that provides important chemical information to unravel elastic and curvilinear living body. However, no breakthrough was made in stretchable electrochemical device for biological detection. Herein, we synthesized Au nanotubes (NTs) with large aspect ratio to construct an effective stretchable electrochemical sensor. Interlacing network of Au NTs endows the sensor with desirable stability against mechanical deformation, and Au nanostructure provides excellent electrochemical performance and biocompatibility. This allows for the first time, real-time electrochemical monitoring of mechanically sensitive cells on the sensor both in their stretching-free and stretching states as well as sensing of the inner lining of blood vessels. The results demonstrate the great potential of this sensor in electrochemical detection of living body, opening a new window for stretchable electrochemical sensor in biological exploration.