Chitosan- and hyaluronic acid-based nanoarchitectures in phototherapy: Combination cancer chemotherapy, immunotherapy and gene therapy

Cancer phototherapy has been introduced as a new potential modality for tumor suppression. However, the efficacy of phototherapy has been limited due to a lack of targeted delivery of photosensitizers. Therefore, the application of biocompatible and multifunctional nanoparticles in phototherapy is appreciated. Chitosan (CS) as a cationic polymer and hyaluronic acid (HA) as a CD44-targeting agent are two widely utilized polymers in nanoparticle synthesis and functionalization. The current review focuses on the application of HA and CS nanostructures in cancer phototherapy. These nanocarriers can be used in phototherapy to induce hyperthermia and singlet oxygen generation for tumor ablation. CS and HA can be used for the synthesis of nanostructures, or they can functionalize other kinds of nanostructures used for phototherapy, such as gold nanorods. The HA and CS nanostructures can combine chemotherapy or immunotherapy with phototherapy to augment tumor suppression. Moreover, the CS nanostructures can be functionalized with HA for specific cancer phototherapy. The CS and HA nanostructures promote the cellular uptake of genes and photosensitizers to facilitate gene therapy and phototherapy. Such nanostructures specifically stimulate phototherapy at the tumor site, with particle toxic impacts on normal cells. Moreover, CS and HA nanostructures demonstrate high biocompatibility for further clinical applications.

Multifunctional polyaniline modified calcium alginate aerogel membrane with antibacterial, oil-water separation, dye and heavy metal ions removal properties for complex water purification

With the rapid development of urbanization, the discharge of industrial wastewater has led to increasingly critical water pollution issues. Additionally, heavy metals, organic dyes, microorganisms and oil pollution often coexist and have persistence and harmfulness. Developing materials that can treat these complex pollutants simultaneously has important practical significance. In this study, a calcium alginate-based aerogel membrane (PANI@CA membrane) was prepared by spraying, polymerization, Ca2+ cross-linking and freeze-drying using aniline and sodium alginate as raw materials. Oil-water emulsion can be separated by PANI@CA membrane only under gravity, and the separation efficiency was as high as 99 %. At the same time, the membrane can effectively intercept or adsorb organic dyes and heavy metal ions. The removal rates of methylene blue and Congo red were above 92 % and 63 % respectively even after ten times of cyclic filtration. The removal rate of Pb2+ was up to 95 %. In addition, PANI@CA membrane shows excellent photothermal conversion ability, and it can effectively kill Staphylococcus aureus under 808 nm laser irradiation. PANI@CA membrane has the advantages of low cost, simple preparation, good stability and high recycling ability, and has potential application prospects in wastewater treatment.

Near-infrared-guided NO generator for combined NO/photothermal/chemodynamic therapy of bacterial infections

Nitric oxide (NO)-based gas therapy approaches are promising in the treatment of infections; however, these strategies are hindered by poor delivery to the target site, which leads to unsatisfactory effects. In this study, we developed a NO-controlled platform (SCM@HA) via NO-generating mesoporous silica nanoparticles co-doped with sodium nitroprusside and copper sulphide to control NO production under near-infrared (NIR)-laser irradiation. Irradiation with an 808 nm NIR laser rapidly triggered the release of NO from the particles to actualise gas therapy. Photothermal therapy (PTT) also increased the local microenvironment temperature, and the close relationship between chemodynamic therapy (CDT) and temperature suggests that the increasing temperature facilitates in its working. The hydroxyl radicals generated by CDT can destroy the structure of bacteria in acidic environments. The germicidal activity of the nanoparticles was determined by the combined action of PTT, CDT, and NO-based gas therapy. The nanoparticles showed bactericidal activity in vitro against bacterial strains Staphylococcus aureus (S. aureus) and Salmonella typhimurium (S. typhimurium). Finally, the anti-infective efficacy in vivo in S. aureus-infected mouse model was demonstrated. Thus, the synergistic antimicrobial effects of NO-generating silica nanoparticles have good potential for the non-antibiotic treatment of bacterial infections in wounds. STATEMENT OF SIGNIFICANCE: Bacterial infections and resistance are challenging health threats. Therefore, the development of an antibiotic-independent method is essential for the treatment of wound bacterial infections. In this study, NO-generating nanoparticles loaded with sodium nitroprusside in copper sulphide-doped mesoporous silica were prepared to control the long-term release of NO using near-infrared laser, which has good efficacy of PTT and CDT. The bactericidal effects of as-prepared nanoparticles against S. aureus and S. typhimurium have been well elucidated. This study proposes a feasible method in the field of NO-based therapy, thus paving the way that will benefit for the treatment of bacterial infections in wounds.

Synthesis of magnetic chitosan/hyaluronic acid/κ-carrageenan nanocarriers for drug delivery

The magnetic nanocarriers containing chitosan/hyaluronic acid complexed with κ-carrageenan were synthesized by solution method, as the drug delivery system. Doxorubicin (DOX) was used as the model drug. Characterization assessments were performed to identify the functional groups, determine the structure and morphology, and magnetic properties of nanodelivery system. Furthermore, their impacts on MCF-7 and MDA-MB-237 cell lines were evaluated by MTT assay. Analyses confirm polymers physical interaction, chemical bonding in the structure, moreover presence of spherical shape magnetic nanoparticles in the 100-150 nm range. The DOX loading was 74.1 ± 2.5 %. Results indicate that the drug loading was raised to 83.0±2.2 % by increasing the amount of κ-carrageenan in specimens. The swelling of samples in the acidic environment (e.g. pH 5.5) was verified by the Dynamic Light Scattering analysis. Consequently, pH stimulus-responsive drug release in the sustained stream and a considerable amount of DOX release (84±3.1 %) was detected as compared to a higher pH medium (27±1.5 % at pH 7.4). According to the MTT assay results, MNPs showed no inhibitory effect on both cell lines. Also, 10 and 15 μg/ml of MNPs-DOX was considered as IC50 value on MDA-MB-237 and MCF-7 cells, respectively. The DOX 25 μg/ml caused 50 % antiproliferative activity in both cell lines.

A review of glycosaminoglycan-modified electrically conductive polymers for biomedical applications

The application areas of electrically conductive polymers have been steadily growing since their discovery in the late 1970s. Recently, electrically conductive polymers have found their way into biomedicine, allowing the realization of many relevant applications ranging from bioelectronics to scaffolds for tissue engineering. Extracellular matrix components, such as glycosaminoglycans, build an important class of biomaterials that are heavily researched for biomedical applications due to their favorable properties. Due to their highly anionic character and the presence of sulfate groups in glycosaminoglycans, these biomolecules can be employed to functionalize conductive polymers, which enables the tailorability and improvement of cell-material interactions of conductive polymers. This review paper gives an overview of recent research on glycosaminoglycan-modified conductive polymers intended for biomedical applications and discusses the effect of different biological dopants on material characteristics, such as surface roughness, stiffness, and electrochemical properties. Moreover, the key findings of the biological characterization in vitro and in vivo are summarized, and remaining challenges in the field, particularly related to the modification of electrically conductive polymers with glycosaminoglycans to achieve improved functional and biological outcomes, are discussed. STATEMENT OF SIGNIFICANCE: The development of functional biomaterials based on electrically conductive polymers (CPs) for various biomedical applications, such as neural regeneration, drug delivery, or bioelectronics, has been increasingly investigated over the last decades. Recent literature has shown that changes in the synthesis procedure or the chosen dopant could adjust the resulting material characteristics. Hence, an interesting approach lies in using natural biomolecules as dopants for CPs to tailor the biological outcome. This review comprehensively summarizes the state of the art in the field of glycosaminoglycan-modified electrically conductive polymers for the first time, particularly highlighting the effect of the chosen dopant on material characteristics, such as surface morphology or stiffness, electrochemical properties, and consequently, cell-material interactions.

The dynamic therapeutic effect of a targeted photothermal nanovaccine incorporating toll-like receptor 7 agonist enhanced cancer immunotherapy

Photothermal therapy (PTT) is a noninvasive and effective thermal therapeutic approach. Near-infrared (NIR) light responsive organic nanoparticles (NPs) have been shown to enhance the efficacy of cancer PTT. However, photothermal ablation induced NPs are currently more effective in treating primary and metastatic cancer. Herein, we designed a NIR light responsive theranostic nanosystem that combines PTT with immunotherapy. The caffeic acid doped polyaniline NPs (CA-PANi) were explored for their potential as PTT agents and their ability to mediate immunogenic cell death (ICD). The nano-theranostic agent of CA-PANi functionalized with the RGD (Arg-Gly-Asp) peptide plays a functional role in targeting integrin receptor overexpressed cancer cells. Furthermore, to enhance the immune response in the immune suppressive tumor microenvironment (iTME), imiquimod (R837) a Toll-like receptor 7 agonist that can promote dendritic cell (DC) maturation greatly inhibits tumor growth and tumor recurrence by initiating a strong antitumor immune response. Therefore, combination of PTT and immunotherapy involving CA-PANi-R837-RGD (denoted as CPRR) to improve the therapeutic effect will provide a nanovaccine strategy for targeted antitumor therapy.

Functional anti-bone tumor biomaterial scaffold: construction and application

Bone tumors, including primary bone tumors and bone metastases, have been plagued by poor prognosis for decades. Although most tumor tissue is removed, clinicians are still confronted with the dilemma of eliminating residual cancer cells and regenerating defective bone tissue after surgery. Therefore, functional biomaterial scaffolds are considered to be the ideal candidates to bridge defective tissues and restrain cancer recurrence. Through functionalized structural modifications or coupled therapeutic agents, they provide sufficient mechanical strength and osteoinductive effects while eliminating cancer cells. Numerous novel approaches such as photodynamic, photothermal, drug-conjugated, and immune adjuvant-assisted therapies have exhibited remarkable efficacy against tumors while exhibiting low immunogenicity. This review summarizes the progress of research on biomaterial scaffolds based on different functionalization strategies in bone tumors. We also discuss the feasibility and advantages of the combined application of multiple functionalization strategies. Finally, potential obstacles to the clinical translation of anti-tumor bone bioscaffolds are highlighted. This review will provide valuable references for future advanced biomaterial scaffold design and clinical bone tumor therapy.

Synthesis and characterization of Hyaluronic Acid (HA) modified polymeric composite for effective treatment of wound healing by transdermal drug delivery system (TDDS)

The present study aimed to fabricate a novel polymeric spongy composite to enhance skin regeneration composed of Nystatin (antifungal agent) and Silver Nanoparticles (AgNps). Different formulations (F1-F8) were developed & characterized by using various analytical techniques. AgNps synthesized by chemical reduction method showed spherical morphology 2 µm in size showed by SEM and XRD. A fine porous structure of gel embedded with AgNps having an amorphous structure with 10 % crystallinity due to AgNps was found. IR spectra revealed no chemical interaction between polymers and Nystatin. An increase in thermal stability of formulation was observed till 700 ℃ analyzed by Differential Scanning Calorimetry. Cytotoxic analysis on L929 mouse skin fibroblast cells showed a decrease in cell viability as Ag concentration increased (inactivating Fibroblast and keratinocytes) while 10 mg composition was found safest concentration (94%). Optimized formulation (F2) presented in-vitro drug release up to 90.59% ± 0.76 at pH 7.4, swelling studies (87.5% ± 0.57), water retention (26.60 ± 0.34), pH (5.31 ± 0.03). In the animal burn model, the group that received CHG/Ag/Nystatin healed the wound significantly (p < 0.05). These results suggested that optimized carrier can be used for other anti-fungal drugs facilitating the early healing of the wound.

Extracellular matrix component-derived nanoparticles for drug delivery and tissue engineering

The extracellular matrix (ECM) consists of a complex combination of proteins, proteoglycans, and other biomolecules. ECM-based materials have been demonstrated to have high biocompatibility and bioactivity, which may be harnessed for drug delivery and tissue engineering applications. Herein, nanoparticles incorporating ECM-based materials and their applications in drug delivery and tissue engineering are reviewed. Proteins such as gelatin, collagen, and fibrin as well as glycosaminoglycans including hyaluronic acid, chondroitin sulfate, and heparin have been employed for cancer therapeutic delivery, gene delivery, and wound healing and regenerative medicine. Strategies for modifying and functionalizing these materials with synthetic and natural polymers or to enable stimuli-responsive degradation and drug release have increased the efficacy of these materials and nano-systems. The incorporation and modification of ECM-based materials may be used to drive drug targeting and increase tissue-specific cell differentiation more effectively.

Alveoli-Like Multifunctional Scaffolds for Optical and Electrochemical In Situ Monitoring of Cellular Responses from Type II Pneumocytes

While breathing, alveoli are exposed to external irritants, which contribute to the pathogenesis of lung disease. Therefore, in situ monitoring of alveolar responses to stimuli of toxicants under in vivo environments is important to understand lung disease. For this purpose, 3D cell cultures are recently employed for examining cellular responses of pulmonary systems exposed to irritants; however, most of them have used ex situ assays requiring cell lysis and fluorescent labeling. Here, an alveoli-like multifunctional scaffold is demonstrated for optical and electrochemical monitoring of cellular responses of pneumocytes. Porous foam with dimensions like the alveoli structure is used as a backbone for the scaffold, wherein electroactive metal-organic framework crystals, optically active gold nanoparticles, and biocompatible hyaluronic acid are integrated. The fabricated multifunctional scaffold allows for label-free detection and real-time monitoring of oxidative stress released in pneumocytes under toxic-conditions via redox-active amperometry and nanospectroscopy. Moreover, cellular behavior can be statistically classified based on fingerprint Raman signals collected from the cells on the scaffold. The developed scaffold is expected to serve as a promising platform to investigate cellular responses and disease pathogenesis, owing to its versatility in monitoring electrical and optical signals from cells in situ in the 3D microenvironments.

A Microfluidic Approach for Synthesis of Silver Nanoparticles as a Potential Antimicrobial Agent in Alginate-Hyaluronic Acid-Based Wound Dressings

The recognized antimicrobial activity of silver nanoparticles is a well-studied property, especially when designing and developing biomaterials with medical applications. As biological activity is closely related to the physicochemical characteristics of a material, aspects such as particle morphology and dimension should be considered. Microfluidic systems in continuous flow represent a promising method to control the size, shape, and size distribution of synthesized nanoparticles. Moreover, using microfluidics widens the synthesis options by creating and controlling parameters that are otherwise difficult to maintain in conventional batch procedures. This study used a microfluidic platform with a cross-shape design as an innovative method for synthesizing silver nanoparticles and varied the precursor concentration and the purging speed as experimental parameters. The compositional and microstructural characterization of the obtained samples was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS). Four formulations of alginate-based hydrogels with the addition of hyaluronic acid and silver nanoparticles were obtained to highlight the antimicrobial activity of silver nanoparticles and the efficiency of such a composite in wound treatment. The porous structure, swelling capacity, and biological properties were evaluated through physicochemical analysis (FT-IR and SEM) and through contact with prokaryotic and eukaryotic cells. The results of the physicochemical and biological investigations revealed desirable characteristics for performant wound dressings (i.e., biocompatibility, appropriate porous structure, swelling rate, and degradation rate, ability to inhibit biofilm formation, and cell growth stimulation capacity), and the obtained materials are thus recommended for treating chronic and infected wounds.

In Situ Polymerization of Aniline Derivative in Vivo for NIR-II Phototheranostics of Tumor

Natural biopolymers can be controllably in situ synthesized in organisms and play important roles in biological activities. Inspired by this, the manipulation of in situ biosynthesis of functional polymers in vivo will be an important way to obtain materials for meeting biological requirements. Herein, in situ biosynthesis of functional conjugated polymer at the tumor site was achieved via the utilization of specific tumor microenvironment (TME) characteristics for the first time. Specially, a water-soluble aniline dimer derivative (N-(3-sulfopropyl) p-aminodiphenylamine, SPA) was artfully in situ polymerized into polySPA (PSPA) nanoparticles at the tumor site, which was activated via the catalysis of hydrogen peroxide (H₂O₂) overexpressed in TME to produce hydroxyl radical (•OH) by coinjected horseradish peroxidase (HRP). Benefiting from outstanding near-infrared (NIR)-II absorption of PSPA, the in situ polymerization process can be validly monitored by photoacoustic (PA) signal at the NIR-II region. Meanwhile, in situ polymerization would induce the size of polymeric materials from small to large, improving the distribution and retention of PSPA at the tumor site. On the combination of NIR-II absorption of PSPA and the size variation induced by polymerization, such polymerization can be applied for tumor-specific NIR-II light mediated PA image and photothermal inhibition of tumors, enhancing the precision and efficacy of tumor phototheranostics. Therefore, the present work opens the way to manipulate TME-activated in situ biosynthesis of functional conjugated polymer at the tumor site for overcoming formidable challenges in tumor theranostics.

Layer-by-Layer siRNA Particle Assemblies for Localized Delivery of siRNA to Epithelial Cells through Surface-Mediated Particle Uptake

Localized delivery of small interfering RNA (siRNA) is a promising approach for spatial control of cell responses at biomaterial interfaces. Layer-by-layer (LbL) assembly of siRNA with cationic polyelectrolytes has been used in film and nanoparticle vectors for transfection. Herein, we combine the ability of particles to efficiently deliver siRNA with the ability of film polyelectrolyte multilayers to act locally. LbL particles were prepared with alternating layers of poly(l-arginine) and siRNA and capped with hyaluronic acid. Negatively charged LbL particles were subsequently assembled on the poly(l-lysine)-functionalized substrate to form a LbL particle-decorated surface. Cells grown in contact with the particle-decorated surface were able to survive, internalize particles, and undergo gene silencing. This work shows that particle-decorated surfaces can be engineered by using electrostatic interactions and used to deliver therapeutic payloads for cell-instructive biointerfaces.

New Materials and Phenomena in Membrane Distillation

In recent decades, membrane-based processes have been extensively applied to a wide range of industrial processes, including gas separation, food industry, drug purification, and wastewater treatment. Membrane distillation is a thermally driven separation process, in which only vapour molecules transfer through a microporous hydrophobic membrane. At the operational level, the performance of membrane distillation is negatively affected by wetting and temperature polarization phenomena. In order to overcome these issues, advanced membranes have been developed in recent years. This review, which focuses specifically on membrane distillation presents the basic concepts associated with the mass and heat transfer through hydrophobic membranes, membrane properties, and advances in membrane materials. Photothermal materials for solar-driven membrane distillation applications are also presented and discussed.

Multifunctional 3D-printed bioceramic scaffolds: Recent strategies for osteosarcoma treatment

Osteosarcoma is the most prevalent bone malignant tumor in children and teenagers. The bone defect, recurrence, and metastasis after surgery severely affect the life quality of patients. Clinically, bone grafts are implanted. Primary bioceramic scaffolds show a monomodal osteogenesis function. With the advances in three-dimensional printing technology and materials science, while maintaining the osteogenesis ability, scaffolds become more patient-specific and obtain additional anti-tumor ability with functional agents being loaded. Anti-tumor therapies include photothermal, magnetothermal, old and novel chemo-, gas, and photodynamic therapy. These strategies kill tumors through novel mechanisms to treat refractory osteosarcoma due to drug resistance, and some have shown the potential to reverse drug resistance and inhibit metastasis. Therefore, multifunctional three-dimensional printed bioceramic scaffolds hold excellent promise for osteosarcoma treatments. To better understand, we review the background of osteosarcoma, primary 3D-printed bioceramic scaffolds, and different therapies and have a prospect for the future.

Self-Healing Polymeric Soft Actuators

Natural evolution has provided multicellular organisms with sophisticated functionalities and repair mechanisms for surviving and preserve their functions after an injury and/or infection. In this context, biological systems have inspired material scientists over decades to design and fabricate both self-healing polymeric materials and soft actuators with remarkable performance. The latter are capable of modifying their shape in response to environmental changes, such as temperature, pH, light, electrical/magnetic field, chemical additives, etc. In this review, we focus on the fusion of both types of materials, affording new systems with the potential to revolutionize almost every aspect of our modern life, from healthcare to environmental remediation and energy. The integration of stimuli-triggered self-healing properties into polymeric soft actuators endow environmental friendliness, cost-saving, enhanced safety, and lifespan of functional materials. We discuss the details of the most remarkable examples of self-healing soft actuators that display a macroscopic movement under specific stimuli. The discussion includes key experimental data, potential limitations, and mechanistic insights. Finally, we include a general table providing at first glance information about the nature of the external stimuli, conditions for self-healing and actuation, key information about the driving forces behind both phenomena, and the most important features of the achieved movement.

Molecularly Targeted Photothermal Ablation of Epidermal Growth Factor Receptor-Expressing Cancer Cells with a Polypyrrole-Iron Oxide-Afatinib Nanocomposite

Simple Summary

In this manuscript, we describe the design and synthesis of a nanocomposite containing afatinib, polypyrrole, and iron oxide (PIA-NC) to molecularly target epidermal growth factor receptor (EGFR)-overexpressing cancer cells for photothermal conversion. In addition to physical and chemical characterization, we also showed that PIA-NC induces selective reactive oxygen species surge and apoptosis in response to sublethal near-infrared light only in EGFR-overexpressing cancer cells, not in EGFR-negative fibroblasts. The work demonstrates the feasibility of photothermal therapy with cellular precision.

Abstract

Near-infrared–photothermal therapy (NIR-PTT) is a potential modality for cancer treatment. Directing photothermal effects specifically to cancer cells may enhance the therapeutic index for the best treatment outcome. While epithelial growth factor receptor (EGFR) is commonly overexpressed/genetically altered in human malignancy, it remains unknown whether targeting EGFR with tyrosine kinase inhibitor (TKI)-conjugated nanoparticles may direct NIR-PTT to cancers with cellular precision. In the present study, we tested this possibility through the fabrication of a polypyrrole–iron oxide–afatinib nanocomposite (PIA-NC). In the PIA-NC, a biocompatible and photothermally conductive polymer (polypyrrole) was conjugated to a TKI (afatinib) that binds to overexpressed wild-type EGFR without overt cytotoxicity. A Fenton catalyst (iron oxide) was further encapsulated in the NC to drive the intracellular ROS surge upon heat activation. Diverse physical and chemical characterization experiments were conducted. Particle internalization, cytotoxicity, ROS production, and apoptosis in EGFR-positive and -negative cell lines were investigated in the presence and absence of NIR. We found that the PIA-NCs were stable with a size of 243 nm and a zeta potential of +35 mV. These PIA-NCs were readily internalized close to the cell membrane by all types of cells used in the study. The Fourier transform infrared spectra showed 3295 cm⁻¹ peaks; substantial O–H stretching was seen, with significant C=C stretching at 1637 cm⁻¹; and a modest appearance of C–O–H bending at 1444 cm⁻¹ confirmed the chemical conjugation of afatinib but not iron oxide to the NC. At a NIR-PTT energy level that has a minimal cytotoxic effect, PIA-NC significantly sensitizes EGFR-overexpressing A549 lung cancer cells to NIR-PTT-induced cytotoxicity at a rate of 70%, but in EGFR-negative 3T3 fibroblasts the rate was 30%. Within 1 min of NIR-PTT, a surge of intracellular ROS was found in PIA-NC-treated A549 cells. This was followed by early induction of cellular apoptosis for 54 ± 0.081% of A549 cells. The number of viable cells was less than a quarter of a percent. Viability levels of A549 cells that had been treated with NIR or PIA were only 50 ± 0.216% and 80 ± 0.216%, respectively. Only 10 ± 0.816% of NIH3T3 cells had undergone necrosis, meaning that 90 ± 0.124% were alive. Viability levels were 65 ± 0.081% and 81 ± 0.2%, respectively, when only NIR and PIA were used. PIA binding was effective against A549 cells but not against NIH3T3 cells. The outcome revealed that higher levels of NC + NIR exposure caused cancer cells to produce more ROS. In summary, our findings proved that a molecularly targeted NC provides an orchestrated platform for cancer cell-specific delivery of NIR-PTT. The geometric proximity design indicates a novel approach to minimizing the off-target biological effects of NIR-PTT. The potential of PIA-NC to be further developed into real-world application warrants further investigation.

Targeted NIR-responsive theranostic immuno-nanomedicine combined TLR7 agonist with immune checkpoint blockade for effective cancer photothermal immunotherapy

Nanomedicine with immunotherapy offers opportunities to target cancer in an effective manner; however, it remains challenging. We herein report a photothermal material loaded with immune-adjuvant combined immune checkpoint blockade for efficient cancer immunotherapy to target estrogen receptor-positive (ER⁺) breast cancer (BC). Endoxifen (END) expressly targets ER⁺ breast cancer cells. As a proof of concept of a targeting ER⁺ agent, END/NIR-responsive polyaniline (PANi)/a toll-like-receptor-7 agonist imiqumoid (R837) activating immune response co-encapsulated nanoparticles were formed as END-PANi-PVP@R837 NPs and found to be very appropriate as an NIR-responsive photothermal platform for versatile immunogenic cell death (ICD) in combination with an immune checkpoint PD-L1 blockade for development as an immunotherapy strategy. In this study, we concentrate on the therapeutic tactic of combining anti-PD-L1 with NPs, not only ablating cancer cells upon NIR irradiation but also providing strong anti-cancer immunity to destroy tumor progression after treatment. In both in vitro and in vivo experiments it was demonstrated that NPs could efficiently activate PTT to induce an immune response and immune resistance based on the PD-L1 checkpoint to ablate the tumor and inhibit tumor recurrence. We confirm the potency of the NPs, which exhibit high photothermal conversion efficacy and stability. The results demonstrate that the NP combination suppresses tumor cell growth at the tumor margin beyond effective PTT and immunotherapy.

Hyaluronic acid coated spinel ferrite for combination of chemo and photodynamic therapy: Green synthesis, characterization, and in vitro and in vivo biocompatibility study

In this project, different photosensitizers were prepared using different ratios of nickel, manganese, and iron. Then, multiple analysis were performed to evaluate their efficiency, and the most suitable one was used to be coated by hyaluronic acid to improve the nano-platform's biocompatibility and target ability. Moreover, another chemical targeting agent (riboflavin) was used to further improve the target ability of the prepared nano-platform. Different spectroscopies and thermal analysis were used to determine the physical and chemical characteristics of the prepared nano-platform. Also, in order to determine the biocompatibility of the nano-platform, in vitro and in vivo tests such as blood hemolysis, blood aggregation and lethal dose were performed. Then, an anti-cancer agent (curcumin) was loaded on the selected nano-platform to makes us able utilizing the synergistic effect of chemotherapy and photodynamic therapy simultaneously. Finally, the cell cytotoxicity results showed that the prepared nano-platform had a great anti-cancer potential which can make it a great candidate as a dual photo and chemo therapy agent for treatment of breast cancers.

The advent of thermoplasmonic membrane distillation

Freshwater scarcity is a vital societal challenge related to climate change, population pressure, and agricultural and industrial demands. Therefore, sustainable desalination/purification of salty/contaminated water for human uses is particularly relevant. Membrane distillation is an emerging hybrid thermal-membrane technology with the potential to overcome the drawbacks of conventional desalination by a synergic exploitation of the water-energy nexus. Although membrane distillation is considered a green technology, efficient heat management remains a critical concern affecting the cost of the process and hindering its viability at large scale. A multidisciplinary approach that involves materials chemistry, physical chemistry, chemical engineering, and materials and polymer science is required to solve this problem. The combination of solar energy with membrane distillation is considered a potentially feasible low-cost approach for providing high-quality freshwater with a low carbon footprint. In particular, recent discoveries about efficient light-to-heat conversion in nanomaterials have opened unprecedented perspectives for the implementation of sunlight-based renewable energy in membrane distillation. The integration of nanofillers enabling photothermal effects into membranes has been demonstrated to be able to significantly enhance the energy efficiency without impacting on economic costs. Here, we provide a comprehensive overview on the state of the art, the opportunities, open challenges and pitfalls of the emerging field of solar-driven membrane distillation. We also assess the peculiar physicochemical properties and synthesis scalability of photothermal materials, as well as the strategies for their integration into polymeric nanocomposite membranes enabling efficient light-to-heat conversion and freshwater.

Hyaluronic acid coated teriflunomide (A771726) loaded lipid carriers for the oral management of rheumatoid arthritis

Systemic rheumatoid arthritis treatment has been associated with numerous side effects. We attempted to formulate hyaluronic acid (HA)-coated teriflunomide (TER)-loaded nanostructured lipid carriers (NLCs) that can target inflamed rheumatic joints following oral administration. In vitro evaluation including colloidal characteristics, drug release and stability studies were conducted. Also, cytotoxicity studies on THP1 and peripheral blood mononuclear cells besides testing the binding of HA coated TER-NLCs to CD44 receptors were carried out. Furthermore, pharmacokinetics following oral administration, anti-arthritic effects, hepato and nephrotoxicity of NLCs were assessed. Selected NLCs formulation was approximately 284.9 ± 3.8 nm in size with 96.89 ± 0.45% entrapment efficiency and provided a sustained release for 30 days. NLCs showed good stability that was confirmed by TEM examination. Cell culture studies revealed that HA-coated TER- NLCs showed superior cytotoxicity and binding affinity to CD44 receptors compared with TER suspension. In vivo studies demonstrated the superiority of NLCs in increasing TER bioavailability, reducing TNF-α serum levels and improving joint healing that was evidenced in both histopathological and X-ray radiographic examination. This may be attributed to the ability of HA-coated TER-NLCs to target rheumatic joints passively and actively by targeting CD44 receptors that are overexpressed in rheumatic joints.

Effective PDT/PTT dual-modal phototherapeutic killing of bacteria by using poly(N-phenylglycine) nanoparticles

This study investigated, for the first time, the antimicrobial properties of polyethylene glycol-functionalized poly(N-phenylglycine) nanoparticles (PNPG-PEG NPs). PNPG-PEG NPs exhibit high extinction coefficient in the near-infrared (NIR) region; they can convert light energy into heat energy with high thermal transformation efficiency. Additionally, they can generate cytotoxic reactive oxygen species (ROS) upon light irradiation. Also, PNPG-PEG NPs are not cytotoxic. All these properties make them appropriate for combined dual-modal photothermal and photodynamic therapies. The antibacterial activity of PNPG-PEG NPs was assessed using Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) pathogenic strains. The results revealed that NIR light (810 nm) irradiation for 10 min could kill effectively the planktonic bacteria and destroy Escherichia coli and Staphylococcus aureus biofilms. The results demonstrated that PNPG-PEG NPs represent a very effective nanoplatform for killing of pathogenic bacteria.

Conjugated polymer nanoparticles and their nanohybrids as smart photoluminescent and photoresponsive material for biosensing, imaging, and theranostics

The emergence of conjugated polymers (CPs) has provided a pathway to attain smart multifunctional conjugated polymer nanoparticles (CPNs) with enhanced properties and diverse applications. CPNs based on π-extended CPs exhibit high fluorescence brightness, low cytotoxicity, excellent photostability, reactive oxygen species (ROS) generation ability, high photothermal conversion efficiency (PCE), etc. which endorse them as an excellent theranostic tool. Furthermore, the unique light-harvesting and energy transfer properties of CPNs enables their transformation into smart functional nanohybrids with augmented performance. Owing to such numerous features, simple preparation method and an easy separation process, the CPNs and their hybrids have been constantly rising as a frontrunner in the domain of medicine and much work has been done in the respective research area. This review summarizes the recent progress that has been made in the field of CPNs for biological and biomedical applications with special emphasis on biosensing, imaging, and theranostics. Following an introduction into the field, a first large section provides overview of the conventional as well as recently established synthetic methods for various types of CPNs. Then, the CPNs-based fluorometric assays for biomolecules based on different detection strategies have been described. Later on, examples of CPNs-based probes for imaging, both in vitro and in vivo using cancer cells and animal models have been explored. The next section highlighted the vital theranostic applications of CPNs and corresponding nanohybrids, mainly via imaging-guided photodynamic therapy (PDT), photothermal therapy (PTT) and drug delivery. The last section summarizes the current challenges and gives an outlook on the potential future trends on CPNs as advanced healthcare material.

Hyaluronic acid targeted and pH-responsive multifunctional nanoparticles for chemo-photothermal synergistic therapy of atherosclerosis

Atherosclerosis is a global disease with an extremely high morbidity and fatality rate, so it is necessary to develop effective treatments to reduce its impact. In this work, we successfully prepared a multifunctional drug-loaded nano-delivery system with pH-responsive, CD44-targeted, and chemical-photothermal synergistic treatment. Dendritic mesoporous silica nanoparticles capped with copper sulfide (CuS) were synthesized via an oil-water biphase stratification reaction system; these served as the carrier material and encapsulated the anticoagulant drug heparin (Hep). The pH-sensitive Schiff base bond was used as a gatekeeper and targeting agent to modify hyaluronic acid (HA) on the surface of the nanocarrier. HA coating endowed the nanocomposite with the ability to respond to pH and target CD44-positive inflammatory macrophages. Based on this multifunctional nanocomposite, we achieved precise drug delivery, controlled drug release, and chemical-photothermal synergistic treatment of atherosclerosis. The in vitro drug release results showed that the nanocarriers exhibited excellent drug-controlled release properties, and could release drugs in the weakly acidic microenvironment of atherosclerotic inflammation. Cytotoxicity and cell uptake experiments indicated that nanocarriers had low cytotoxicity against RAW 264.7 cells. Modification of HA to nanocarriers can be effectively internalized by RAW 264.7 cells stimulated by lipopolysaccharide (LPS). Combining CuS photothermal treatment with anti-atherosclerosis chemotherapy showed better effects than single treatment in vitro and in vivo. In summary, our research proved that H-CuS@DMSN-NC-HA has broad application prospects in anti-atherosclerosis.

Glycol chitosan/iron oxide/polypyrrole nanoclusters for precise chemodynamic/photothermal synergistic therapy

Noninvasive photothermal therapy (PTT) represents a promising direction for more modern and precise medical applications. However, PTT efficacy is still not satisfactory due to the existence of heat shock proteins (HSPs) and poorly targeted delivery. Herein, the design of a nanosystem with improved delivery efficacy for anticancer treatment employing the synergetic effects of reactive oxygen species (ROS)-driven chemodynamic therapy (CDT) to inactivated HSPs with photothermal-hyperthermia was therefore achieved through the development of pH-targeting glycol chitosan/iron oxide enclosed core polypyrrole nanoclusters (GCPI NCs). The designed NCs effectively accumulated toward cancer cells due to their acidic microenvironment, initiating ROS generation via Fenton reaction at the outset and performing site-specific near infrared (NIR)-photothermal effect. A comprehensive analysis of both surface and bulk material properties of the CDT/PTT NCs as well as biointerface properties were ascertained via numerous surface specific analytical techniques by bringing together heightened accumulation of CDT/PTT NCs, which can significantly eradicate cancer cells thus minimizing the side effects of conventional chemotherapies. All of these attributes act in synergy over the cancer cells succeeding in fashioning NC's able to act as competent agents in the MRI-monitored enhanced CDT/PTT synergistic therapy. Findings in this study evoke attention in future oncological therapeutic strategies.

Synthesis of self-assembled hyaluronan based nanoparticles and their applications in targeted imaging and therapy

Hyaluronan (HA) is a polysaccharide consisting of repeating disaccharides of N-acetyl-d-glucosamine and d-glucuronic acid. There are increasing interests in utilizing self-assembled HA nanoparticles (HA-NPs) for targeted imaging and therapy. The principal endogenous receptor of HA, cluster of differentiation 44 (CD44), is overexpressed on many types of tumor cells as well as inflammatory cells in human bodies. Active targeting from HA-CD44 mediated interaction and passive targeting due to the enhanced permeability retention (EPR) effect could lead to selective accumulation of HA-NPs at targeted disease sites. This review focuses on the synthesis strategies of self-assembled HA-NPs, as well as their applications in therapy and biomedical imaging.

A Polyaniline Nanoparticles Crosslinked Hydrogel with Excellent Photothermal Antibacterial and Mechanical Properties for Wound Dressing

Antibacterial hydrogel wound dressing is highly desirable in wound healing and infection control. However, the development of antibacterial hydrogels with controllable antibacterial properties and adequate mechanical properties without bacterial resistance and potential toxicity remains a challenge. Herein, a double bonds-ended polyaniline nanoparticle (Me-PANI NP) is synthesized, which can convert light energy into heat upon near-infrared (NIR) irradiation, and it is used as a novel photothermal antibacterial agent. The obtained bonds-ended Me-PANI NPs are subsequently involved in polyacrylamide (PAM) polymerization and served as chemical crosslinking points to form the Me-PANI NPs@PAM hydrogel, endowing the hydrogel with controllable photothermal antibacterial abilities upon NIR irradiation without time and space limit. Importantly, due to the energy dissipation of Me-PANI NPs under stretch, the Me-PANI NPs@PAM hydrogel achieves a maximum stretching ratio of 400% mechanical flexibility. The developed hydrogel can be potentially applied as a novel wound dressing to realize controllable treatment of bacterial infections and accelerate skin wound healing.

Synergistic and receptor-mediated targeting of arthritic joints via intra-articular injectable smart hydrogels containing leflunomide-loaded lipid nanocarriers

Intra-articular drug delivery represents a tempting strategy for local treatment of rheumatoid arthritis. Targeting drugs to inflamed joints bypasses systemic-related side effects. Albeit, rapid drug clearance and short joint residence limit intra-articular administration. Herein, injectable smart hydrogels comprising free/nanoencapsulated leflunomide (LEF) were developed. Nanostructured lipid carriers (NLCs), 200-300 nm, were coated with either chondroitin sulfate (CHS), hyaluronic acid (HA), or chitosan (CS) to provide joint targetability. Coated NLCs were incorporated in either hyaluronic/pluronic (HP) or chitosan/β-glycerophosphate (CS/βGP) hydrogels. Optimized systems ensured convenient gelation time (14-100 s), injectability (5-15 s), formulation-dependent mechanical strength, and extended LEF release up to 51 days. In vivo intra-articular injection in induced arthritis rat model revealed that rats treated with HA-coated NLCs showed the fastest recovery. Histopathological examination demonstrated perfect joint healing in case of HA-coated LEF-NLCs in CS/βGP thermogel manifested as minor erosion of subchondral bone, improved intensity of extracellular matrix, cartilage thickness, and chondrocyte number. Both HA- and CHS-coated NLCs reduced TNF-α level 4-5-fold relative to positive control. The feat would be achieved via active targeting to CD44 receptors overexpressed in the articular tissue, limiting chondrocyte apoptosis together with innate synergistic targetability by promoting chondrocyte proliferation and neovascularization, inhibiting the production of pro-inflammatory cytokines, thus enhancing cartilaginous tissue repair.

Impact of Poly (Styrene-Acrylic Acid) Latex Nanoparticles on Colorectal and Cervical Cancer Cells

Polymer nanoparticles are a promising approach for cancer treatment and detection, due to their biocompatibility, biodegradability, targeting capabilities, capacity for drug loading and long blood circulation time. This study aims to evaluate the impact of poly (styrene–acrylic acid) latex particles on colorectal and cervical cancer cells for anti-tumor efficiency. Latex particles were synthesized by a surfactant-free radical emulsion polymerization process and the obtained polymer particles were characterized in terms of size, size distribution, morphology using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and electrokinetic property (i.e., zeta potential). Human colorectal and cervical cancer, and normal cell lines, were then treated with different concentrations of poly (styrene–acrylic acid) latex particles. The cell morphology changes were pointed out using an optical microscope and the nanoparticles’ (NPs) cell cytotoxicity was evaluated using MTT assay. The obtained results showed that poly (styrene–acrylic acid) latex particles are effective against colorectal and cervical cancer cells if treated with an appropriate particle concentration for 48 h. In addition, it showed that normal cells are the least affected by this treatment. This indicates that these NPs are safe as a drug delivery carrier when used at a low concentration.

Synergistic Effect of Photothermally Targeted NIR-Responsive Nanomedicine-Induced Immunogenic Cell Death for Effective Triple Negative Breast Cancer Therapy

Triple negative breast cancer (TNBC) is a breast cancer subtype. At present, TNBC patients do not have approved targeted therapy. Therefore, patients primarily depend on forceful systemic chemotherapy that has unavoidable harmful side effects, resulting in inadequate therapeutic outcomes and leading to a high mortality rate. Hence, there is an urgent need to develop targeted therapies for the TNBC populace. Developing a new nanotherapeutic approach of combinational therapy could be an effective alternative strategy. Therefore, we designed a combination of hyaluronan (HA)-polyaniline (PANi)-imiquimod (R837), denoted as HA-PANi/R837, nanoparticles (NPs) that exhibited a high extinction coefficient of 8.23 × 10⁸ M^-1 cm^-1 and adequate photothermal conversion efficiency (PCE) (η = 41.6%), making them an efficient photothermal agent (PTA) that is highly beneficial for selective CD44-mediated photothermal ablation of TNBC tumors. Furthermore, co-encapsulation of R837 (toll-like receptor 7 agonist) immunoadjuvant molecules triggers an immune response against the tumor. The formed CD44-targeted HA-PANi/R837 NPs' selectivity incinerates the tumor under near-infrared (NIR)-triggered photothermal ablation, generating tumor-associated antigens and triggering R837 combination with anti-CTLA-4 for immunogenic cell death (ICD) activation to kill the remaining tumor cells in mice and protect against tumor relapse and metastasis. Our results demonstrated that novel HA-PANi/R837 NP-induced photothermal ICD achieved in CD44-targeted TNBC is a promising application.

In vitro biocompatibility screening of a colloidal gum Arabic-polyaniline conducting nanocomposite

Although polyaniline (PANI) is a widely investigated conductive polymer for biological applications, studies addressing the biocompatibility of colloidal PANI dispersions are scarcely found in the literature of the area. Therefore, PANI nanoparticles stabilized by the natural polysaccharide gum Arabic (GA) were screened for their biocompatibility. The GA successfully stabilized the colloidal PANI-GA dispersions when exposed to a protein-rich medium, showing compatibility with the biological environment. The results obtained from a series of in vitro assays showed that, after up to 48 h of exposure to a range of PANI-GA concentrations (1-50 μg/mL), both mouse BALB/3T3 fibroblasts and RAW 264.7 macrophages showed no evidence of change in cellular proliferation, viability and metabolic activity. An increase in macrophage granularity poses as evidence of phagocytic uptake of PANI-GA, without resulting activation of this cell type. Additionally, the PANI-GA nanoparticles modulated the cell morphology changes induced on fibroblasts by GA in a concentration-dependent manner. Thus, this unprecedented biocompatibility study of PANI nanoparticles stabilized by a plant gum exudate polysaccharide showed promising results. This simple biomaterial might be further developed into colloidal formulations for biological and biomedical applications, taking advantage of its versatility, biocompatibility, and conductive properties.

Bio-functional hydrogel membranes loaded with chitosan nanoparticles for accelerated wound healing

Wounds are often recalcitrant to traditional wound dressings and a bioactive and biodegradable wound dressing using hydrogel membranes can be a promising approach for wound healing applications. The present research aimed to design hydrogel membranes based on hyaluronic acid, pullulan and polyvinyl alcohol and loaded with chitosan based cefepime nanoparticles for potential use in cutaneous wound healing. The developed membranes were evaluated using dynamic light scattering, proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The results indicated the novel crosslinking and thermal stability of the fabricated hydrogel membrane. The in vitro analysis demonstrates that the developed membrane has water vapors transmission rate (WVTR) between 2000 and 2500 g/m²/day and oxygen permeability between 7 and 14 mg/L, which lies in the range of an ideal dressing. The swelling capacity and surface porosity to liberate encapsulated drug (cefepime) in a sustained manner and 88% of drug release was observed. The cefepime loaded hydrogel membrane demonstrated a higher zone of inhibition against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli and excisional rat model exhibit expeditious recovery rate. The developed hydrogel membrane loaded with cefepime nanoparticles is a promising approach for topical application and has greater potential for an accelerated wound healing process.

Recent Advances of Polyaniline-Based Biomaterials for Phototherapeutic Treatments of Tumors and Bacterial Infections

Conventional treatments fail to completely eradicate tumor or bacterial infections due to their inherent shortcomings. In recent years, photothermal therapy (PTT) has emerged as an attractive treatment modality that relies on the absorption of photothermal agents (PTAs) at a specific wavelength, thereby transforming the excitation light energy into heat. The advantages of PTT are its high efficacy, specificity, and minimal damage to normal tissues. To this end, various inorganic nanomaterials such as gold nanostructures, carbon nanostructures, and transition metal dichalcogenides have been extensively explored for PTT applications. Subsequently, the focus has shifted to the development of polymeric PTAs, owing to their unique properties such as biodegradability, biocompatibility, non-immunogenicity, and low toxicity when compared to inorganic PTAs. Among various organic PTAs, polyaniline (PANI) is one of the best-known and earliest-reported organic PTAs. Hence, in this review, we cover the recent advances and progress of PANI-based biomaterials for PTT application in tumors and bacterial infections. The future prospects in this exciting area are also addressed.

Hyaluronic acid wreathed, trio-stimuli receptive and on-demand triggerable nanoconstruct for anchored combinatorial cancer therapy

Hyaluronic acid (HA) assisted effective internalization into CD44 receptor-overexpressing cancer cells, which could offer an excellent cytotoxic profile and tumor alterations. In this study, duo-photothermal agents (copper sulfide (CuS) and graphene oxide (GO)), chemotherapeutic drug (doxorubicin (DOX)), and targeting moiety (HA) were incorporated into a complexed nanoconstruct for trio-responsive chemo-phototherapy. The nanosystem (CuS(DOX)-GO-HA) was demonstrating its responsive drug release and escalated photothermal behavior. The hyperthermia and photodynamic effect were observed along with efficient ROS generation in the presence of dual photosensitizers. The in vivo biodistribution and photothermal profile reflected a high accumulation and retention of the nanoconstruct in the tumor. Importantly, nanoconstructs effectively inhibit tumor growth based on tumor volume analysis and the altered expression of apoptosis, cell proliferation, and angiogenesis markers. Collectively, these findings suggest that this nanoconstruct has excellent antitumor effects in CD44 overexpressed cells showing the potential for clinical translation in the future.

Integration of Fe3O4 with Bi2S3 for Multi-Modality Tumor Theranostics

The combination of reactive oxygen species (ROS)-induced chemodynamic therapy (CDT) and photothermal therapy (PTT) holds a promising application prospect for their superb anticancer efficiency. Herein, we created a novel Fe₃O₄@polydopamine (PDA)@bovine serum albumin (BSA)-Bi₂S₃ composite as a theranostic agent, by chemically linking the Fe₃O₄@PDA with BSA-Bi₂S₃ via the amidation between the carboxyl groups of BSA and the amino groups of PDA. In this formulation, the Fe₃O₄ NPs could not only work as a mimetic peroxidase to trigger Fenton reactions of the innate H₂O₂ in the tumor and generate highly cytotoxic hydroxyl radicals (•OH) to induce tumor apoptosis but also serve as the magnetic resonance imaging (MRI) contrast agent to afford the precise cancer diagnosis. Meanwhile, the PDA could prevent the oxidization of Fe₃O₄, thus supporting the long-term Fenton reactions and the tumor apoptosis in the tumor. The Bi₂S₃ component exhibits excellent photothermal transducing performance and computed tomography (CT) imaging capacity. In addition, the PDA and Bi₂S₃ endow the Fe₃O₄@PDA@BSA-Bi₂S₃ composite with an excellent photothermal transforming ability which could lead to tumor hyperthermia. All of these merits play the synergism with the tumor microenvironment and qualify the Fe₃O₄@PDA@BSA-Bi₂S₃ NPs for a competent agent in the MRI/CT-monitored enhanced PTT/CDT synergistic therapy. Findings in this research will evoke new interests in future cancer therapeutic strategies based on biocompatible nanomaterials.

Scalable dextran-polypyrrole nano-assemblies with photothermal/photoacoustic dual capabilities and enhanced biocompatibility

Polypyrroles have shown great potential in photoacoustic imaging and photothermal therapy owing to its excellent photothermal conversion capabilities. However, the synthesis of polypyrrole-based nano-assemblies which have colloidal stability in biological buffers requires a number of steps, including the polymerization of pyrrole monomers, self-assembly of polypyrrole-based copolymers, and even an additional step to increase the biocompatibility of the nano-assemblies. Herein, a "polymerization/assembly" two-in-one synthesis is proposed for the first time to achieve the one-step synthesis of a new family of polypyrrole-based nano-assemblies, dextran-polypyrrole nano-assemblies (Dex-PPy NAs), under ambient conditions and in aqueous media. In addition, the approach employs tetravalent cerium ions as initiators which can initiate the polymerization of pyrrole monomers through the initiation of free radicals from dextran molecular chains. The resultant Dex-PPy NAs have a photothermal conversion efficiency reaching as high as 41 % and an excellent photostability. More importantly, the NAs with controllable nanoscale dimensions display no signs of cytotoxicity in both in vitro and in vivo studies owing to their biocompatible dextran "shell". An in vivo study further confirmed that the Dex-PPy NAs have excellent real-time photoacoustic imaging and photothermal therapy capabilities for malignant tumors. Therefore, this study represents an important step towards the scalable synthesis of polypyrrole-based nano-assemblies with photothermal/photoacoustic dual capabilities and enhanced biocompatibility.

Hyaluronic Acid (HA)-Based Silk Fibroin/Zinc Oxide Core-Shell Electrospun Dressing for Burn Wound Management

Burn injuries represent a major life-threatening event that impacts the quality of life of patients, and places enormous demands on the global healthcare systems. This study introduces the fabrication and characterization of a novel wound dressing made of core-shell hyaluronic acid-silk fibroin/zinc oxide (ZO) nanofibers for treatment of burn injuries. The core-shell configuration enables loading ZO-an antibacterial agent-in the core of nanofibers, which in return improves the sustained release of the drug and maintains its bioactivity. Successful formation of core-shell nanofibers and loading of zinc oxide are confirmed by transmission electron microscopy, Fourier-transform infrared spectroscopy, and energy dispersive X-ray. The antibacterial activity of the dressings are examined against Escherichia coli and Staphylococcus aureus and it is shown that addition of ZO improves the antibacterial property of the dressing in a dose-dependent fashion. However, in vitro cytotoxicity studies show that high concentration of ZO (>3 wt%) is toxic to the cells. In vivo studies indicate that the wound dressings loaded with ZO (3 wt%) substantially improves the wound healing procedure and significantly reduces the inflammatory response at the wound site. Overall, the dressing introduced herein holds great promise for the management of burn injuries.

3D printing of metal-organic framework nanosheets-structured scaffolds with tumor therapy and bone construction

After surgical resection for a bone tumor, the uncleared bone tumor cells can multiply and cause recurrence of the bone tumor. It is worthwhile to design a scaffold that kills the remaining bone tumor cells and repairs bone defects that were given rise to by surgical resection. Additionally, it is extremely important to consider the function of angiogenesis in the process of bone regeneration because the newly formed blood vessels can offer the nutrients for bone regeneration. In this work, a novel metal-organic framework Cu-TCPP nanosheets interface-structured β-tricalcium phosphate (TCP) (Cu-TCPP-TCP) scaffold was successfully prepared through integrating a 3D-printing technique with an in-situ growth method in a solvothermal system. Owing to the excellent photothermal effect of Cu-TCPP nanosheets, Cu-TCPP-TCP scaffolds that were illuminated by near-infrared (NIR) light demonstrated photothermal performance, which was well regulated through varying the contents of Cu-TCPP nanosheets, and the ambient humidity and power density of NIR light. When cultured with osteosarcoma cells, Cu-TCPP-TCP scaffolds killed a significant quantity of osteosarcoma cells through released heat energy after exposure to NIR light with power density 1.0 W cm^-2 and duration 10 min. Similarly, Cu-TCPP-TCP scaffolds ablated subcutaneous bone tumor tissues on the backs of naked mice and suppressed their growth because of the heat energy transformed from NIR light. I n-vitro studies found that Cu-TCPP-TCP scaffolds ably supported the attachments of both human bone marrow stromal cells (HBMSCs) and human umbilical vein endothelial cells (HUVECs), and significantly stimulated expressions of osteogenesis differentiation-related genes in HBMSCs and angiogenesis differentiation-related genes in HUVECs. After implanting Cu-TCPP-TCP scaffolds into the bone defects of rabbits, they effectively promoted bone regeneration. Thus, the integration of the bone-forming bioactivity of TCP scaffolds with the photothermal properties of Cu-TCPP nanosheets and angiogenesis activity of Cu ions makes Cu-TCPP-TCP scaffolds multifunctional, representing a new horizon to develop biomaterials for simultaneously curing bone tumors and repairing bone defects.

Thermal stimuli-responsive hyaluronic acid loaded cellulose based physical hydrogel for post-surgical de novo peritoneal adhesion prevention

Effective strategies for post-surgical adhesion prevention have increasingly focused on injectable adhesion barriers due to their minimal invasiveness and wider applicability. In this study, a thermo-reversible hydrogel was developed by combining high molecular weight hyaluronic acid (HA) at various concentrations (0.05, 0.25, and 0.45% w/v) with tempo-oxidized nanocellulose (TOCN), methyl cellulose (MC) and polyethylene glycol (PEG) for anti-adhesion application. The hydrogel preparation time was short and did not require any chemical modification. TOCN ensured the mechanical stability of the hydrogel. MC confirmed thermo-sensitive feature. Higher amounts of HA increased the rate of hydrogel degradation. The HA 0.25 hydrogel was free-flowing, injectable at ambient temperature, capable of faster (40 ± 2 s), and reversible sol-gel (4 °C-37 °C) transition. A rat side-wall cecum abrasion model was used to confirm the complete de novo adhesion prevention efficacy of optimized HA 0.25 hydrogel, where the scratched abdominal wall of animals treated with HA 0.25 hydrogel healed after 14 days. During in vivo experiment, PEG in the hydrogel played a crucial role in adhesion prevention by minimizing friction between the surgical site and nearby organs. In a nutshell, HA 0.25 hydrogel, fabricated without crosslinking agent, is a potential candidate for tissue adhesion prevention strategies.

Comparison of polysaccharides in articular cartilage regeneration associated with chondrogenic and autophagy-related gene expression

Articular cartilage exhibits reduced self-healing following degeneration. This research evaluated the effects of hydrogels derived from various polysaccharides-gellan gum (GG), alginate, and agarose-on cartilage regeneration compared with that of hyaluronic acid (HA), which is commonly used in cartilage tissue engineering. Chondrocytes were isolated from the articular cartilage of New Zealand White (NZW) rabbits and stimulated with IL-1β followed by incubation with polysaccharides. The expressions of NF-κB and Cox-2 were decreased and those of IκBα, Sox-9, aggrecan, and type II collagen were increased in HA, GG, and Alginate groups. Osteochondral defects in NZW rabbits were treated with intra-articular polysaccharide injections; all except alginate resulted in tissue regeneration. Significant improvements were observed in cartilage regeneration in the GG and agarose groups. These results show that GG and agarose improve cartilage regeneration by suppressing inflammatory mediators and inducing cartilage formation and autophagy-related gene expression, indicating their potential for cartilage tissue engineering.

Tumor pH-Responsive Albumin/Polyaniline Assemblies for Amplified Photoacoustic Imaging and Augmented Photothermal Therapy

Tumor-microenvironment-responsive theranostics have great potential for precision diagnosis and effective treatment of cancer. Polyaniline (PANI) is the first reported pH-responsive organic photothermal agent and is widely used as a theranostic agent. However, tumor pH-responsive PANI-based theranostic agents are not explored, mainly because the conversion from the emeraldine base (EB) to emeraldine salt (ES) state of PANI requires pH < 4, which is lower than tumor acidic microenvironment. Herein, a tumor pH-responsive PANI-based theranostic agent is designed and prepared for amplified photoacoustic imaging guided augmented photothermal therapy (PTT), through intermolecular acid-base reactions between carboxyl groups of bovine serum albumin (BSA) and imine moieties of PANI. The albumin/PANI assemblies (BSA-PANI) can convert from the EB to ES state at pH < 7, accompanied by the absorbance redshift from visible to near-infrared region. Both in vitro and in vivo results demonstrate that tumor acidic microenvironment can trigger both the photoacoustic imaging (PAI) signal amplification and the PTT efficacy enhancement of BSA-PANI assemblies. This work not only highlights that BSA-PANI assemblies overcome the limitation of low-pH protonation, but also provides a facile assembly strategy for a tumor pH-responsive PANI-based nanoplatform for cancer theranostics.

Nanobiomaterials: from 0D to 3D for tumor therapy and tissue regeneration

Nanobiomaterials have attracted tremendous attention in the biomedical field. Especially in the past few years, a large number of low dimensional nanobiomaterials, including 0D nanostructures, 1D nanotubes and 2D nanosheets, were employed for tumor therapy due to their optically triggered tumor therapy effects and drug loading capacities. However, these low dimensional nanobiomaterials cannot support cell adhesion and possess poor tissue regeneration ability, thus they are not suitable for application in regenerative medicine. Three dimensional (3D) nanofiber scaffolds have attracted extensive attention in tissue regeneration, including bone, skin, nerve and cardiac tissues, due to their similar extracellular matrix structures. Additionally, many 3D scaffolds displayed bone and cartilage regeneration abilities. Therefore, to obtain materials with both tumor therapy and tissue regeneration abilities, it is meaningful and necessary to develop 3D nanobiomaterials with multifunctions. In this review, we systematically review the research progress of nanobiomaterials with varied dimensional structures including 0D, 1D, 2D and 3D, as well as evolutional functions from single tumor therapy to simultaneous tumor therapy and tissue regeneration. This review may pave the way for developing an interdisciplinary research of nanobiomaterials in combination of tumor therapy and regenerative medicine.

Hyaluronic acid coated electrospun chitosan-based nanofibers prepared by simultaneous stabilizing and coating

Chitosan (CS) and hyaluronic acid (HA) are two oppositely charged natural polysaccharides used widely for preparation of nanofibrous scaffolds for tissue engineering applications. Here, we prepared composite fibers composed of CS and HA by electrospinning and subsequent coating. In this regard, two approaches were applied for coating CS nanofibers by HA. In the first method, electrospun nanofiner was first neutralized and then coating was done (HA/CS1), while in the second approach, neutralization and coating were carried out simultaneously (HA/CS2). The overall fibrous structure of the mats was preserved after coating through both methods and there was no remarkable morphological difference between HA/CS1 and HA/CS2 samples. The presence of HA and possible interactions between CS and HA were demonstrated in both HA coated nanofibers by FTIR and thermal gravimetric analysis. However, HA/CS2 nanofibers indicated more interactions between HA and CS. Contact angel measurement revealed differences in the wettability of resultant fibers. Although both scaffolds showed high wettability, the HA/CS2 had lower wettability than HA/CS1. More importantly, there was a difference in cytocompatibility of the scaffolds. Both HA coated scaffolds showed improvement in cell proliferation. However, cell proliferation and adhesion were more when HA was coated through a direct simultaneous method.