Plasmonic Properties of Self-Assembled Gold Nanocrescents: Implications for Chemical Sensing

A bottom-up approach, the Langmuir-Blodgett technique, is used for the preparation of composite thin films of gold nanoparticles and polymers: poly(styrene-b-2-vinylpyridine), poly-2-vinylpyridine, and polystyrene. The self-assembly of poly(styrene-b-2-vinylpyridine) at the air-water interface leads to the formation of surface micelles, which serve as a template for the organization of gold nanoparticles into ring assemblies. By using poly-2-vinylpyridine in conjunction with low surface pressure, the distance between nanostructures can be increased, allowing for optical characterization of single nanostructures. Once deposited on a solid substrate, the preorganized gold nanoparticles are subjected to further growth by the reduction of additional gold, leading to a variety of nanostructures which can be divided into two categories: nanocrescents and circular arrays of nanoparticles. The optical properties of individual structures are investigated by optical dark-field spectroscopy and numerical calculations. The plasmonic behavior of the nanostructures is elucidated through the correlation of optical properties with structural features and the identification of dominant plasmon modes. Being based on a self-assembly approach, the reported method allows for the formation of interesting plasmonic materials under ambient conditions, at a relatively large scale, and at low cost. These attributes, in addition to the resonances located in the near-infrared region of the spectrum, make nanocrescents candidates for biological and chemical sensing.

Physical and chemical parameters determining the formation of gold-sp metal (Al, Ga, In, and Pb) nanoalloys

Alloying is a key step towards the fabrication of advanced and unique nanomaterials demanded by the next generation of nanotechnology solutions. In particular, the alloys of Au with the sp-metals are expected to have several appealing plasmonic and electronic properties for a wide range of applications in optics, catalysis, nanomedicine, sensing and quantum devices. However, little is known about the thermodynamic and synthetic factors leading to the successful alloying of Au and sp-metals at the nanoscale. In this work, Au-M nanoalloys, with M = Al, Ga, In, or Pb, have been synthesized by a green and single step laser ablation in liquid (LAL) approach in two environments (pure ethanol and anhydrous acetone). To delve deeper into the key parameters leading to successful alloying under the typical operating conditions of LAL, a multiparametric analysis was performed considering the mixing enthalpy from DFT calculations and other alloying descriptors such as the Hume-Rothery parameters. The results showed that the dominant factors for alloying change dramatically with the oxidative ability of the synthesis environment. In this way, the tendency of the four sp metals to alloy with gold was accurately predicted (R2 > 0.99) using only two and three parameters in anhydrous and non-anhydrous environments, respectively. These results are important to produce nanoalloys using LAL and other physical methods because they contribute to the understanding of factors leading to element mixing at the nanoscale under real synthetic conditions, which is crucial for guiding the realization of next-generation multifunctional metallic nanostructures.

SERS-based methods for the detection of genomic biomarkers of cancer

Genomic biomarkers of cancer are based on changes in nucleic acids, which include abnormal expression levels of some miRNAs, point mutations in DNA sequences, and altered levels of DNA methylation. The presence of tumor-related nucleic acids in body fluids (blood, saliva, or urine) makes it possible to achieve a non-invasive early-stage cancer diagnosis. Currently existing techniques for the discovery of nucleic acids require complex, time-consuming, costly assays and have limited multiplexing abilities. Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopy technique that is able to provide molecular specificity combined with trace sensitivity. SERS has gained research attention as a tool for the detection of nucleic acids because of its promising potential: label-free SERS can decrease the complexity of assays currently used with fluorescence-based detection due to the absence of the label, while labeled SERS may outperform the gold standard in terms of the multiplexing ability. The first papers about SERS-based methods for the measurement of genomic biomarkers were written in 2008, and since then, more than 150 papers have been published. The aim of this paper is to review and evaluate the proposed SERS-based methods in terms of their level of development and their potential for liquid biopsy application, as well as to contribute to their further evolution by attracting research attention to the field. This goal will be reached by grouping, on the basis of their experimental protocol, all the published manuscripts on the topic and evaluating each group in terms of its limit of detection and applicability to real body fluids. Thus, the methods are classified according to their working principles into five main groups, including capture-based, displacement-based, sandwich-based, enzyme-assisted, and specialized protocols.

Physicochemical properties of ultrasmall colloidal silver nanoparticles: an experimental and computational approach

Silver nanoparticles (AgNPs) exhibit very interesting properties that have been employed in several kinds of applications spanning from antibacterial activity to plasmon-polaritons generation. Nanoparticle size strongly influences these applications. However, the characterization of ultrasmall AgNPs (particle diameter < 10 nm) encompassing different aspects such as average size, polydispersion, shape (anisotropy), concentration, and density remains a challenging task. To address these challenges, we combined TEM measurements with a computational framework based on Mie-Gans theory. This allowed us to describe the aforementioned AgNP features accurately. The synthesis of AgNPs in an aqueous medium involved the use of silver nitrate as a chemical precursor and sodium borohydride as a reducing agent, with polyvinylpyrrolidone acting as a stabilizing agent. Our outcomes showed that increasing the concentration of the precursor and reducing agent with a fixed 1 : 2 molar ratio tends to yield ultrasmall AgNPs with low to moderate polydispersion, a nearly spherical shape (low anisotropy), concentration in the nanomolar range and density close to silver bulk. Also, we established an analytical expression that correlates the extinction molar absorptivity to AgNP size considering the nanoparticle shape. Notably, the computational framework proved to be highly effective in extracting crucial information about the AgNPs from UV-vis spectroscopy data. In conclusion, our study sheds light on the unique properties of ultrasmall AgNPs and presents a comprehensive approach for properly characterizing these nanoparticles, paving the way for further advancements in their applications.

Factor analysis of the time series of SERS spectra reveals water arrangement and surface plasmon changes in Ag nanoparticle systems

The enhancement of Raman signals of molecules localized in the vicinity of plasmonic nanoparticles, known as surface-enhanced Raman scattering (SERS) effect, is strongly influenced by the selected excitation wavelength. The optimal excitation wavelength in SERS measurements is given by the position of the surface plasmon extinction (SPE) band of the studied system. Even a small change of the SPE band intensity, position and/or shape during the measurement may influence the SERS signal significantly. In this work, we prepared several systems of Ag nanoparticles, which were used for the demonstration how the information about SPE changes can be obtained by multivariate statistical analysis (factor analysis; FA) from SERS spectral sets, and employed in more precise and more comprehensive interpretation of the results. In non-aggregated Ag colloidal systems measured at the excitation wavelength of 445 nm, SPE band changes could be monitored by the analysis of water stretching vibration together with the vibrations in the fingerprint region. The FA of the water stretching band region was shown to provide unique information on both arrangement and disarrangement of water molecules in the vicinity of Ag NPs during the time evolution of these SERS active systems. In addition, the FA of the fingerprint region helped to monitor a rapid metalation of meso-tetrakis(N-methyl-4-pyridyl)porphine in etched SERS systems with Ag⁺ ions released from the NPs surface. In aggregated Ag colloidal systems measured at the excitation wavelength of 785 nm, the FA of SERS spectral sets enabled us to reveal the contribution of the 2nd electromagnetic enhancement to the overall SERS signal. The reliability of our conclusions was verified by comparing the results obtained from FA of SERS spectral sets with the data obtained from the parallel SPE measurements of the studied systems.

Simple Method for Optical Detection and Characterization of Surface Agents on Conjugated Gold Nanoparticles

In this article, we propose a simple method to calculate electrical permittivity and refractive index of surface agents of gold nanoparticles (Au NPs), in which it is possible to find the refractive index of surface agents shell by using the absorption peak of the gold nano-colloid. One of the usual tests for detection of surface agents is colorimetric methods based on the change of color of Au NPs. The color change is mainly due to the shift of localized surface plasmon resonance which is related to electrical interactions of surface agents. Although there are many mathematical models for simulating the absorption spectrum and calculating the plasmonic peak, using them is not simple and possible for everyone due to the need for programming. Here, the necessary simulations have been performed for different values ​​of refractive index of surface agents and particle size, and absorption peaks have been obtained. Using numerical methods, a simple formula is obtained between the wavelength of plasmonic peak, the ratio of hydrodynamic diameter to Feret size of the particles, and the refractive index of the surface agents. This method can help researchers to obtain the refractive index and consequently the type or concentration of surface agents around Au NPs without the need for programming or complex mathematical operations. It can also open new horizons in analyzing colorimetric diagnosis of biological agents such as viral antibodies, antigens, and other biological agents.

Fundamentals and Applications of Raman-Based Techniques for the Design and Development of Active Biomedical Materials

Raman spectroscopy is an analytical method based on light-matter interactions that can interrogate the vibrational modes of matter and provide representative molecular fingerprints. Mediated by its label-free, non-invasive nature, and high molecular specificity, Raman-based techniques have become ubiquitous tools for in situ characterization of materials. This review comprehensively describes the theoretical and practical background of Raman spectroscopy and its advanced variants. The numerous facets of material characterization that Raman scattering can reveal, including biomolecular identification, solid-to-solid phase transitions, and spatial mapping of biomolecular species in bioactive materials, are highlighted. The review illustrates the potential of these techniques in the context of active biomedical material design and development by highlighting representative studies from the literature. These studies cover the use of Raman spectroscopy for the characterization of both natural and synthetic biomaterials, including engineered tissue constructs, biopolymer systems, ceramics, and nanoparticle formulations, among others. To increase the accessibility and adoption of these techniques, the present review also provides the reader with practical recommendations on the integration of Raman techniques into the experimental laboratory toolbox. Finally, perspectives on how recent developments in plasmon- and coherently-enhanced Raman spectroscopy can propel Raman from underutilized to critical for biomaterial development are provided.

Plasmonic 3-D wrinkled polymeric shrink film-based SERS substrates for pesticide detection on real-world surfaces

The continuous and excessive use of agrochemicals for crop improvement and protection has raised widespread concern, as they exert adverse effects on human health and the local environment. Surface Enhanced Raman Spectroscopy (SERS) provides a method for the quick identification and detection of such hazardous substances in a short amount of time due to its properties of being robust, accurate, sensitive and non-destructive. Despite the fact that several SERS substrates have been developed, the bulk of them are ineffective in terms of sample collection or providing reproducible results. In this study, we showed that a 3-D wrinkled polymeric heat-shrink film coated with Au bead@Ag nanorods (silver nanorods) serves as a potential SERS substrate for trace analysis. The surface of the heat-shrink film became wrinkled after heating, and this, along with the spatial arrangement of nanoparticles, significantly enhances the Raman signal of the analytes. The fabricated SERS substrate was able to sense two model analytes 1,4-benzenedithiol (BDT) and 2-naphthalenethiol (NT) up to 10^-13 M and 10^-11 M concentrations. The fabricated substrate was also effective in sensing thiram down to 10^-13 M concentration. Additionally, the SERS substrate was applied in a real-world setting for the detection of the pesticide thiram spiked onto apple skin surfaces. To collect the thiram residues, the substrate was simply swabbed across the surface of the apple. This allowed for the detection of thiram at concentrations as low as 10^-9 M (1 ppb). The fabricated SERS substrate can thus detect analytes in an efficient, sensitive, dependable and accurate manner, allowing for the sensing of trace analytes like pesticides in a real-world environment.

Microfluidic SERS devices: brightening the future of bioanalysis

A new avenue has opened up for applications of surface-enhanced Raman spectroscopy (SERS) in the biomedical field, mainly due to the striking advantages offered by SERS tags. SERS tags provide indirect identification of analytes with rich and highly specific spectral fingerprint information, high sensitivity, and outstanding multiplexing potential, making them very useful in in vitro and in vivo assays. The recent and innovative advances in nanomaterial science, novel Raman reporters, and emerging bioconjugation protocols have helped develop ultra-bright SERS tags as powerful tools for multiplex SERS-based detection and diagnosis applications. Nevertheless, to translate SERS platforms to real-world problems, some challenges, especially for clinical applications, must be addressed. This review presents the current understanding of the factors influencing the quality of SERS tags and the strategies commonly employed to improve not only spectral quality but the specificity and reproducibility of the interaction of the analyte with the target ligand. It further explores some of the most common approaches which have emerged for coupling SERS with microfluidic technologies, for biomedical applications. The importance of understanding microfluidic production and characterisation to yield excellent device quality while ensuring high throughput production are emphasised and explored, after which, the challenges and approaches developed to fulfil the potential that SERS-based microfluidics have to offer are described.

Heterogeneous Nanoplasmonic Amplifiers for Photocatalysis’s Application: A Theoretical Study

The higher cost of Ag and Au and their resonance frequency shift limitation opened the way to find an alternative solution by developing new nanohybrid antenna based on silicon and silicon dioxide coated with metallic nanoparticles. The latter has been recently solicited as a promising configuration for more large-scale plasmonic utilisation. This work reports a multitude of fascinating new phenomenon on LSPR on silicon antenna wires coated with core-shell nanospheres and the studying of the nanoplasmonics amplifiers to control optical and electromagnetic properties of materials. The LSPR modes and their interaction with the silicon nanowires are studied using numerical methods. The suggested configuration offers resonance covering the UV-visible and NIR regions, making them an adaptable addition to the nanoplasmonics toolbox.

Microfluidics and surface-enhanced Raman spectroscopy, a win-win combination?

With the continuous development in nanoscience and nanotechnology, analytical techniques like surface-enhanced Raman spectroscopy (SERS) render structural and chemical information of a variety of analyte molecules in ultra-low concentration. Although this technique is making significant progress in various fields, the reproducibility of SERS measurements and sensitivity towards small molecules are still daunting challenges. In this regard, microfluidic surface-enhanced Raman spectroscopy (MF-SERS) is well on its way to join the toolbox of analytical chemists. This review article explains how MF-SERS is becoming a powerful tool in analytical chemistry. We critically present the developments in SERS substrates for microfluidic devices and how these substrates in microfluidic channels can improve the SERS sensitivity, reproducibility, and detection limit. We then introduce the building materials for microfluidic platforms and their types such as droplet, centrifugal, and digital microfluidics. Finally, we enumerate some challenges and future directions in microfluidic SERS. Overall, this article showcases the potential and versatility of microfluidic SERS in overcoming the inherent issues in the SERS technique and also discusses the advantage of adding SERS to the arsenal of microfluidics.

Facile tuning of tip sharpness on gold nanostars by the controlled seed-growth method and coating with a silver shell for detection of thiram using surface enhanced Raman spectroscopy (SERS)

Developing SERS substrates based on individual gold and silver metals, either with rough surfaces or bare nanoparticles, has certain limitations in practical analysis applications. In order to improve the range of applications of the noble metallic substrates, a comprehensive approach has been proposed for preparing non-traditional SERS nano-substrates by combining tip-enhanced gold nanostars and Raman signal amplification of the silver layer. This preparation process is conducted in two steps, including tuning the sharpness and length of tips by a modified seed growth method followed by coating the silver layer on the formed star-shaped nanoparticles. The obtained AuNS-Ag covered with an average size of around 100 nm exhibited interesting properties as a two-component nano-substrate to amplify the activities in SERS for detecting thiram. The controllable and convenient preparation route of gold nanostars is based on the comproportionation reaction of Au seed particles with Au(iii) ions, achieved by governing the stirring times of the mixture of the Au seed and the growth solution. Thus, the citrate-seed particles decreased in size (below 2 nm) and grew into nanostars with sharp tips. The thickness of Ag covering the Au particles' surface also was appropriately controlled and the tips were still exposed to the outside, which is a benefit for matching with the source excitation wavelength to achieve good SERS performance. The Raman signals of thiram can be instantly and remarkably detected with the enhancement of the substrates. Thiram can be determined without any pretreatment. It was found that the limit of detection for thiram is 0.22 ppm, and the limit of quantification is 0.73 ppm. These experimental results shed some light on developing the SERS method for detecting pesticide residue.

Developing SERS substrates based on the star-like morphology of gold nanoparticles covered by a silver layer to overcome limitations in practical analysis application.

Hybrid 2D Correlation-Based Loss Function for the Correction of Systematic Errors

We present the derivation of a new kind of loss function from the symmetry rules of synchronous and asynchronous two-dimensional correlation maps. This loss function, which takes into account correlations that are based on causal relations among the members of a series of spectra, can be employed to solve non-linear inverse problems that are plagued by systematic multiplicative errors. This possibility results from the correlation-based loss function being practically insensitive to such systematic errors, which often arise in spectroscopy because sample spectra are usually ratioed against reference spectra. Using dispersion analysis, a sophisticated method of band fitting, of the spectra of poly(methyl methacrylate) films deposited on gold, we demonstrate the applicability and validity of the new loss function. If gold is used as a substrate, experimental spectra are often unphysical, that is, they display reflectance values larger than unity. In such cases, our correlation-based loss function not only helps to achieve accurate fits but also provides corrections to obtain physically meaningful spectra, which leads to results that are superior to conventional correction methods. The validity of the results is checked and proved with help of the results of dispersion analysis of spectra of films of poly(methyl methacrylate) on calcium fluoride (CaF₂) and silicon (Si), which do not suffer from the systematic errors.

Real-Time Monitoring of the In Situ Microfluidic Synthesis of Ag Nanoparticles on Solid Substrate for Reliable SERS Detection

A sharpened control over the parameters affecting the synthesis of plasmonic nanostructures is often crucial for their application in biosensing, which, if based on surface-enhanced Raman spectroscopy (SERS), requires well-defined optical properties of the substrate. In this work, a method for the microfluidic synthesis of Ag nanoparticles (NPs) on porous silicon (pSi) was developed, focusing on achieving a fine control over the morphological characteristics and spatial distribution of the produced nanostructures to be used as SERS substrates. To this end, a pSi membrane was integrated in a microfluidic chamber in which the silver precursor solution was injected, allowing for the real-time monitoring of the reaction by UV-Vis spectroscopy. The synthesis parameters, such as the concentration of the silver precursor, the temperature, and the flow rate, were varied in order to study their effects on the final silver NPs' morphology. Variations in the flow rate affected the size distribution of the NPs, whereas both the temperature and the concentration of the silver precursor strongly influenced the rate of the reaction and the particle size. Consistently with the described trends, SERS tests using 4-MBA as a probe showed how the flow rate variation affected the SERS enhancement uniformity, and how the production of larger NPs, as a result of an increase in temperature or of the concentration of the Ag precursor, led to an increased SERS efficiency.

Study the plasmonic property of gold nanorods highly above damage threshold via single-pulse spectral hole-burning experiments

Intense femtosecond laser irradiation reshapes gold nanorods, resulting in a persistent hole in the optical absorption spectrum of the nanorods at the wavelength of the laser. Single-pulse hole-burning experiments were performed in a mixture of nanorods with a broad absorption around 800 nm with a 35-fs laser with 800 nm wavelength and 6 mJ/pulse. A significant increase in hole burning width at an average fluence of 10⁶ J/m² has been found, suggesting a tripled damping coefficient of plasmon. This shows that the surface plasmonic effect still occurs at extremely high femtosecond laser fluences just before the nanorods are damaged and the remaining 10% plasmonic enhancement of light is at the fluence of 10⁶ J/m², which is several orders of magnitude higher than the damage threshold of the gold nanorods. Plasmon-photon interactions may also cause an increase in the damping coefficient.

Recent Developments in Plasmonic Sensors of Phenol and Its Derivatives

Many scientists are increasingly interested in on-site detection methods of phenol and its derivatives because these substances have been universally used as a significant raw material in the industrial manufacturing of various chemicals of antimicrobials, anti-inflammatory drugs, antioxidants, and so on. The contamination of phenolic compounds in the natural environment is a toxic response that induces harsh impacts on plants, animals, and human health. This mini-review updates recent developments and trends of novel plasmonic resonance nanomaterials, which are assisted by various optical sensors, including colorimetric, fluorescence, localized surface plasmon resonance (LSPR), and plasmon-enhanced Raman spectroscopy. These advanced and powerful analytical tools exhibit potential application for ultrahigh sensitivity, selectivity, and rapid detection of phenol and its derivatives. In this report, we mainly emphasize the recent progress and novel trends in the optical sensors of phenolic compounds. The applications of Raman technologies based on pure noble metals, hybrid nanomaterials, and metal–organic frameworks (MOFs) are presented, in which the remaining establishments and challenges are discussed and summarized to inspire the future improvement of scientific optical sensors into easy-to-operate effective platforms for the rapid and trace detection of phenol and its derivatives.

Surface-Enhanced Raman Sensing of Semi-Volatile Organic Compounds by Plasmonic Nanostructures

Facile detection of indoor semi-volatile organic compounds (SVOCs) is a critical issue to raise an increasing concern to current researchers, since their emissions have impacted the health of humans, who spend much of their time indoors after the recent incessant COVID-19 pandemic outbreaks. Plasmonic nanomaterial platforms can utilize an electromagnetic field to induce significant Raman signal enhancements of vibrational spectra of pollutant molecules from localized hotspots. Surface-enhanced Raman scattering (SERS) sensing based on functional plasmonic nanostructures has currently emerged as a powerful analytical technique, which is widely adopted for the ultra-sensitive detection of SVOC molecules, including phthalates and polycyclic aromatic hydrocarbons (PAHs) from household chemicals in indoor environments. This concise topical review gives updated recent developments and trends in optical sensors of surface plasmon resonance (SPR) and SERS for effective sensing of SVOCs by functionalization of noble metal nanostructures. Specific features of plasmonic nanomaterials utilized in sensors are evaluated comparatively, including their various sizes and shapes. Novel aptasensors-assisted SERS technology and its potential application are also introduced for selective sensing. The current challenges and perspectives on SERS-based optical sensors using plasmonic nanomaterial platforms and aptasensors are discussed for applying indoor SVOC detection.

Microfluidic In Situ Patterning of Silver Nanoparticles for Surface-Enhanced Raman Spectroscopic Sensing of Biomolecules

This work integrates the advantages of microfluidic devices, nanoparticle synthesis, and on-chip sensing of biomolecules. The concept of microreactors brings new opportunities in chemical synthesis, especially for metallic nanoparticles favorable in surface-enhanced Raman spectroscopy (SERS) for high-resolution and low-limit detection of biomolecules. However, still missing is our understanding of reactions at the microscale and how microsystems can be exploited in biosensing applications via precise control of nanomaterial synthesis. We investigate how microfluidic geometry affects nanoparticle patterning for high-resolution SERS-based sensing and propose a spiral-shaped microchannel that can achieve enhanced mixing, rapid reaction at room temperature, and uniform in situ patterning. The roles of channel geometry as the key parameter on patterning have been studied systematically to provide insight into the rational design of continuous microfluidic systems for SERS applications. We also demonstrate potential applications of this integrated system in label-free on-chip detection of 1 pM rhodamine B (enhancement factor, ∼4.3 × 10¹¹) and a 1 nM 41-base single-stranded deoxyribonucleic acid (DNA) sequence (enhancement factor, ∼1.5 × 10⁸). Our ready-to-use multifunctional system provides an alternative strategy for the facile fabrication of SERS-active substrates and promotes system integration, miniaturization, and on-site biological applications.

Numerical Study on the Surface Plasmon Resonance Tunability of Spherical and Non-Spherical Core-Shell Dimer Nanostructures

The near-field enhancement and localized surface plasmon resonance (LSPR) on the core-shell noble metal nanostructure surfaces are widely studied for various biomedical applications. However, the study of the optical properties of new plasmonic non-spherical nanostructures is less explored. This numerical study quantifies the optical properties of spherical and non-spherical (prolate and oblate) dimer nanostructures by introducing finite element modelling in COMSOL Multiphysics. The surface plasmon resonance peaks of gold nanostructures should be understood and controlled for use in biological applications such as photothermal therapy and drug delivery. In this study, we find that non-spherical prolate and oblate gold dimers give excellent tunability in a wide range of biological windows. The electromagnetic field enhancement and surface plasmon resonance peak can be tuned by varying the aspect ratio of non-spherical nanostructures, the refractive index of the surrounding medium, shell thickness, and the distance of separation between nanostructures. The absorption spectra exhibit considerably greater dependency on the aspect ratio and refractive index than the shell thickness and separation distance. These results may be essential for applying the spherical and non-spherical nanostructures to various absorption-based applications.

Rational Approach to Plasmonic Dimers with Controlled Gap Distance, Symmetry, and Capability of Precisely Hosting Guest Molecules in Hotspot Regions

Plasmonic dimers not only provide a unique platform for studying fundamental plasmonic behavior and effects but also are functional materials for numerous applications. The efficient creation of well-defined dimers with flexible control of structure parameters and thus tunable optical property is the prerequisite for fully exploiting the potential of this nanostructure. Herein, based on a polymer-assisted self-assembly approach in conjugation with molecular cage chemistry, a strategy was demonstrated for constructing cage-bridged plasmonic dimers with controlled sizes, compositions, shape, symmetry, and interparticle gap separation in a modular and high-yield manner. With a high degree of freedom and controllability, this strategy allows facilely accessing various symmetrical/asymmetrical dimers with sub-5 nm gap distance and tailored optical properties. Importantly, as the linkage of the two constituent elements, the molecular cages embedded in the junction endow the assembled dimers with the ability to precisely and reversibly host rich guest molecules in hotspot regions, offering great potential for creating various plasmon-mediated applications.

Controlling the Multiscale Topography of Anodized Aluminum Oxide Nanowire Structures for Surface-Enhanced Raman Scattering and Perfect Absorbers

In this study, a plasmonically active substrate is developed with the aim of controlling the perfect absorption and manipulating its optical properties for application in SERS (in NIR regime) and colorimetry. Based on modified fabrication method of anodized aluminum oxide (AAO), the cost-effective self-aggregation technique is presented to fabricate unique topography of bone-fire-like funnel-shaped collapsed and vertically aligned nanowire structures. The length of the nanowire and the modification of surface topography induced by capillary force inside the nanowire are set to structural parameters, and the effect of their changes is closely studied. After deposition of 40 nm gold (Au) film on numerous AAO nanowire structures with different wire lengths and unique topography, the localized surface plasmon resonance excitation is generated, and also its application on reflection and SERS spectra have been shown quantitatively. The length of the wire and surface topography modification are identified as suitable parameters to tune the reflection/absorption (from <40 to >90%) as well as colorimetric effect. Finally, an optimized wire length of Au-coated AAO substrate in SERS sensing application with 3.92 × 10⁵ order of enhancement of rhodamine 6G (R6G) Raman signal is demonstrated.

Non-Absorbing Dielectric Materials for Surface-Enhanced Spectroscopies and Chiral Sensing in the UV

Low-loss dielectric nanomaterials are being extensively studied as novel platforms for enhanced light-matter interactions. Dielectric materials are more versatile than metals when nanostructured as they are able to generate simultaneously electric- and magnetic-type resonances. This unique property gives rise to a wide gamut of new phenomena not observed in metal nanostructures such as directional scattering conditions or enhanced optical chirality density. Traditionally studied dielectrics such as Si, Ge or GaP have an operating range constrained to the infrared and/or the visible range. Tuning their resonances up to the UV, where many biological samples of interest exhibit their absorption bands, is not possible due to their increased optical losses via heat generation. Herein, we report a quantitative survey on the UV optical performance of 20 different dielectric nanostructured materials for UV surface light-matter interaction based applications. The near-field intensity and optical chirality density averaged over the surface of the nanoparticles together with the heat generation are studied as figures of merit for this comparative analysis.

Simulation and Fabrication of Nanoscale Spirals Based on Dual-Scale Self-Assemblies

Archimedean spirals in nanometer scale have shown remarkable plasmonic responses derived from their linear and rotational asymmetry. Despite the unique optical properties of nanoscale spirals, their applications have been limited due to the difficulty in fabricating large-scale arrays with uniform and systematic control of the morphology. Here, we report simulation results of spiral morphologies, which are used to design a scalable fabrication process for nanoscale spirals and predict their plasmonic responses. First, self-consistent field theory (SCFT) simulations were performed to design optimal templates to guide self-assembly into spiral morphologies. Using the SCFT results, we developed a scalable fabrication process, which is based on the micron-scale assembly of microspheres combined with glancing angle deposition and nanoscale assembly of block copolymers, to induce the formation of uniform nanospirals with diverse size, handedness, orientation, and winding number. Finally, finite-difference time-domain simulation results show linear dichroism and electric field intensity enhancement effects of these nanospirals, which are highly dependent on the winding number of the spirals, indicating the importance of precise control of the structural parameters.

A rapid and convenient screening method for detection of restricted monensin, decoquinate, and lasalocid in animal feed by applying SERS and chemometrics

The surface-enhanced activities of size- and shape-controlled gold nanoparticles (AuNPs) with superior chemical stability were investigated to explore a possible development of a simple and non-destructive spectroscopic method to help the regulatory agency's analytical services for rapid detection and characterization of selected antimicrobials in animal feeds. Feed samples spiked at different concentration ranges of antimicrobials were evaluated using AuNPs as a surface-enhanced Raman spectroscopy (SERS) agent. The collected SERS spectra were mathematically preprocessed for further analysis. The classification models obtained 100% predictive accuracy with zero or little misclassification. The first two canonical variables (p = 0.001) could explain >95% of the variability in preprocessed spectral data. Most chemometric models for predicting MON, DEC, and LAS concentrations showed a high predictive accuracy (r² > 0.90), lower predictive error (<20 mg/kg), and satisfactory regression quality (slope close to 1.0). The statistical results showed no statistically significant difference between the reference and SERS predicted values (p > 0.05). The findings and implications from the study indicate that SERS would be a powerful and efficient technique possessing a great potential serving as an excellent monitoring and screening tool for antimicrobial contaminated samples in the on-site analysis.

Silver-chitosan nanocomposite as a plasmonic platform for SERS sensing of polyaromatic sulfur heterocycles in oil fuel

Herein, a silver-chitosan nanocomposite for application in surface enhanced Raman spectroscopy (SERS) sensing was proposed. It was shown that optically transparent chitosan coatings with 0.8 μm thickness allow penetration of target analytes to silver nanoparticles and the analysis in both polar and nonpolar solvents. Under the chosen conditions, chitosan formed continuously smooth films and coatings stabilizing rough nanostructured metallic surfaces and served as a suitable matrix for immobilization, uniform spreading, and preconcentration of the analytes. Polycyclic aromatic sulfur heterocycles were chosen as target analytes being one of the most important fuel quality markers, hazardous components, and the hardest-to-remove impurities. For the most effective immobilization and even distribution of the analytes onto a nanostructured metallic surface, an additional polymer layer of chitosan was found to be needed. The presence of thin films of chitosan resulted in higher reproducibility of SERS spectra as compared to bare nanostructured silver substrates. Additionally, the developed nanocomposite SERS sensors provided the rapid determination of dibenzothiophene and its derivatives in isooctane with the threshold of detection better than 0.1 μM. This approach was successfully applied in the analysis of real fuel samples and the results agreed well with independently measured FTIR and GC-MS data.

Reproducible and Bendable SERS Substrates with Tailored Wettability Using Block Copolymers and Anodic Aluminum Oxide Templates

Surface properties are essential for substrates exhibiting high sensitivity in surface-enhanced Raman scattering (SERS) applications. In this work, novel SERS hybrid substrates using polystyrene-block-poly(methyl methacrylate) and anodic aluminum oxide templates is presented. The hybrid substrates not only possess hierarchical porous nanostructures but also exhibit superhydrophilic surface properties with the water contact angle ≈0°. Such surfaces play an important role in providing uniform enhanced intensities over large areas (relative standard deviation ≈10%); moreover, these substrates are found to be highly sensitive (limit of detection ≈10^-12 m for rhodamine 6G (R6G)). The results show that the hybrid SERS substrates can achieve the simultaneous detection of multicomponent mixtures of different target molecules, such as R6G, crystal violet, and methylene blue. Furthermore, the bending experiments show that about 70% of the SERS intensities are maintained after bending from ≈30° to 150°.

Impact of photosensitizer orientation on the distance dependent photocatalytic activity in zinc phthalocyanine–nanoporous gold hybrid systems

The distance dependency of the photocatalytic activity in zinc phthalocyanine–nanoporous gold hybrid systems was investigated revealing the importance of photosensitizer orientation in novel hybrid-based photocatalysts.

Active site-dominated electromagnetic enhancement of surface-enhanced Raman spectroscopy (SERS) on a Cu triangle plate

Revealing the sensitivity and selectivity of the Raman enhancement mechanism is extremely significant for disease diagnosis, environmental surveillance, and food safety supervision. In this study, chemical erosion copper triangle plates (CTPs) were employed as SERS substrate to detect the rhodamine B (Rh B) probe molecule at different etching times. A simple and cost-effective method affords unique insights into the surface enrichment of analytes, which could facilitate the high-performance SERS analysis of numerous analytes. The relationship between the Raman intensity and the concentration of Rh B follows the Freundlich model, which means that the wet-etching surface can create SERS-active site attachment Rh B molecules on the CTPs. The morphology of CTPs was modified by H₂O₂/HCl etchants; however, the composition of CTPs remained stable without oxidation. This proposes that the largest contribution to the enhancement was the hot-spots that can produce surface plasma resonance on the CTPs. The number of hot-spots can be intelligently adjusted by the artificial control of the surface morphology of metal materials, providing an unambiguous improvement in the SERS sensitivity and capability.

Chemical etching CTP to create a rough surface that has high enhancement factors of SERS.

A look into the use of Raman spectroscopy for brain and breast cancer diagnostics: linear and non-linear optics in cancer research as a gateway to tumor cell identity

Introduction: Currently, intensely developing of linear and non-linear optical methods for cancer detection provides a valuable tool to improve sensitivity and specificity. One of the main reasons for insufficient progress in cancer diagnostics is related to the fact that most cancer types are not only heterogeneous in their genetic composition but also reside in varying microenvironments and interact with different cell types. Until now, no technology has been fully proven for effective detecting of invasive cancer, which infiltrating the extracellular matrix.Areas covered: This review investigates the current status of Raman spectroscopy and Raman imaging for brain and breast cancer diagnostics. Moreover, the review provides a comprehensive overview of the applicability of atomic force microscopy (AFM), linear and non-linear optics in cancer research as a gateway to tumor cell identity.Expert commentary: A combination of linear and non-linear optics, particularly Raman-driven methods, has many additional advantages to identify alterations in cancer cells that are crucial for their proliferation and that distinguish them from normal cells.

Kinetic Rate Constants of Gold Nanoparticle Deposition on Silicon

We fabricated gold nanoparticles on nanoporous silicon microparticles using electroless deposition in a hydrofluoric acid solution containing gold chloride. The reaction was followed by UV spectrometer analysis of the absorbance of the solution (proportional to the nanoparticle concentration) for two temperatures (20 and 50 °C). The results indicate that the process is autocatalytic, described by a pseudo-first-order reaction, the apparent rate constant k_obs of which was determined by utilizing UV spectrometer data. We found that the reaction rate constant at 20 °C is 7 × 10^-3 s^-1 and that at 50 °C is 2.9 × 10^-2 s^-1. Scanning electron microscope (SEM) analysis of samples and diffusion-limited aggregation (DLA) simulations were used to validate the results. This study aims to resolve the kinetics of the electroless deposition of gold on silicon at the nanoscale, in the present state of art missing a quantitative characterization, for certain conditions of growth and given values of temperature and concentration of the reagents. Results may have applications to the synthesis of gold nanoparticles and their use as nanosensors, drug delivery systems, or metal nanometamaterials with advanced optical properties.

Gold Film over SiO2 Nanospheres-New Thermally Resistant Substrates for Surface-Enhanced Raman Scattering (SERS) Spectroscopy

Surface-enhanced Raman scattering (SERS) sensors are constructed from metallic plasmonic nanostructures providing high sensitivity and spectral reproducibility. In many cases, irradiation of the SERS substrate by the laser beam leads to an increase of the local temperature and consequently to thermal degradation of metallic nanostructure itself and/or adsorbed analyte. We report here a "bottom-up" technique to fabricate new thermally resistant gold "film over nanosphere" (FON) substrates for SERS. We elaborated the simple and straightforward method of preparation of homogeneously and closely packed monolayer of SiO₂ nanoparticles (50 nm in diameter) and covered it by a thin (20 nm) layer of magnetron-sputtered gold. The spectral testing using biologically important molecules (methylene blue, cationic porphyrin, and fungicide 1-methyl-1H-benzimidazole-2-thiol) proved a sensitivity and reproducibility of our AuSiO₂ substrates. The main advantage of such SERS-active substrates is high thermal stability and low intensity of background and signal of graphitic carbon.

One Spot-Two Sensors: Porous Silicon Interferometers in Combination With Gold Nanostructures Showing Localized Surface Plasmon Resonance

Sensors composed of a porous silicon monolayer covered with a film of nanostructured gold layer, which provide two optical signal transduction methods, are fabricated and thoroughly characterized concerning their sensing performance. For this purpose, silicon substrates were electrochemically etched in order to obtain porous silicon monolayers, which were subsequently immersed in gold salt solution facilitating the formation of a porous gold nanoparticle layer on top of the porous silicon. The deposition process was monitored by reflectance spectroscopy, and the appearance of a dip in the interference pattern of the porous silicon layer was observed. This dip can be assigned to the absorption of light by the deposited gold nanostructures leading to localized surface plasmon resonance. The bulk sensitivity of these sensors was determined by recording reflectance spectra in media having different refractive indices and compared to sensors exclusively based on porous silicon or gold nanostructures. A thorough analysis of resulting shifts of the different optical signals in the reflectance spectra on the wavelength scale indicated that the optical response of the porous silicon sensor is not influenced by the presence of a gold nanostructure on top. Moreover, the adsorption of thiol-terminated polystyrene to the sensor surface was solely detected by changes in the position of the dip in the reflectance spectrum, which is assigned to localized surface plasmon resonance in the gold nanostructures. The interference pattern resulting from the porous silicon layer is not shifted to longer wavelengths by the adsorption indicating the independence of the optical response of the two nanostructures, namely porous silicon and nanostructured gold layer, to refractive index changes and pointing to the successful realization of two sensors in one spot.

Plasmonic gold nanoparticles: Optical manipulation, imaging, drug delivery and therapy

Over the past two decades, the development of plasmonic nanoparticle (NPs), especially gold (Au) NPs, is being pursued more seriously in the medical fields such as imaging, drug delivery, and theranostic systems. However, there is no comprehensive review on the effect of the physical and chemical parameters of AuNPs on their plasmonic properties as well as the use of these unique characteristic in medical activities such as imaging and therapeutics. Therefore, in this literature the surface plasmon resonance (SPR) modeling of AuNPs was accurately captured toward precision medicine. Indeed, we investigated the importance of plasmonic properties of AuNPs in optical manipulation, imaging, drug delivery, and photothermal therapy (PTT) of cancerous cells based on their physicochemical properties. Finally, some challenges regarding the commercialization of AuNPs in future medicine such as, cytotoxicity, lack of standards for medical applications, high cost, and time-consuming process were discussed.

Metasurface-Based Molecular Biosensing Aided by Artificial Intelligence

Molecular spectroscopy provides unique information on the internal structure of biological materials by detecting the characteristic vibrational signatures of their constituent chemical bonds at infrared frequencies. Nanophotonic antennas and metasurfaces have driven this concept towards few-molecule sensitivity by confining incident light into intense hot spots of the electromagnetic fields, providing strongly enhanced light-matter interaction. In this Minireview, recently developed molecular biosensing approaches based on the combination of dielectric metasurfaces and imaging detection are highlighted in comparison to traditional plasmonic geometries, and the unique potential of artificial intelligence techniques for nanophotonic sensor design and data analysis is emphasized. Because of their spectrometer-less operation principle, such imaging-based approaches hold great promise for miniaturized biosensors in practical point-of-care or field-deployable applications.

Controlled Tuning of the Size of Ag-Hydrosol Nanoparticles by Nonstabilized THF and Detection of Peroxides in THF

Surface plasmon extinction (SPE) spectra of plasmonic nanoparticles (NPs) are sensitive indicators of their composition, size, shape, interparticle interactions, and of the dielectric constant of their ambient. In this study, rapid changes in SPE spectra of Ag NPs suggesting variations in NP size and concentration were detected after addition of aged tetrahydrofuran (THF). Using time-dependent UV/vis spectroscopy combined with factor analysis, transmission electron microscopy imaging, selected-area electron diffraction, and energy-dispersive X-ray analysis, we observed that an over-limit amount of aged THF fully dissolved Ag NPs with no plasmon recovery. By contrast, an under-limit amount led to incomplete dissolution of Ag NPs and, after reaching the turnover point, to spontaneous recrystallization on residual Ag nuclei, as demonstrated by the SPE band intensity recovery to the original or even higher values. The newly formed Ag NPs were isometric, and their diameter was dependent on the added amount of THF. Furthermore, both Ag NP dissolution and recrystallization were caused by THF peroxides and their reduction products. Therefore, the dissolution of Ag NPs and the resulting hydrosol bleaching may be used as an indicator of the presence of peroxides in THF. Moreover, the reaction of aged THF with Ag NPs can be employed as a tool for tuning the size of Ag NPs in hydrosols.

Large-Scale Fabrication of Nanostructure on Bio-Metallic Substrate for Surface Enhanced Raman and Fluorescence Scattering

The integration of surface-enhanced Raman scattering (SERS) and surface-enhanced fluorescence (SEF) has attracted increasing interest and is highly probable to improve the sensitivity and reproducibility of spectroscopic investigations in biomedical fields. In this work, dual-mode SERS and SEF hierarchical structures have been developed on a single bio-metallic substrate. The hierarchical structure was composed of micro-grooves, nano-particles, and nano-ripples. The crystal violet was selected as reporter molecule and both the intensity of Raman and fluorescence signals were enhanced because of the dual-mode SERS-SEF phenomena with enhancement factors (EFs) of 7.85 × 105 and 14.32, respectively. The Raman and fluorescence signals also exhibited good uniformity with the relative standard deviation value of 2.46% and 5.15%, respectively. Moreover, the substrate exhibited high sensitivity with the limits of detection (LOD) as low as 1 × 10-11 mol/L using Raman spectroscopy and 1 × 10-10 mol/L by fluorescence spectroscopy. The combined effect of surface plasmon resonance and "hot spots" induced by the hierarchical laser induced periodical surface structures (LIPSS) was mainly contributed to the enhancement of Raman and fluorescence signal. We propose that the integration of SERS and SEF in a single bio-metallic substrate is promising to improve the sensitivity and reproducibility of detection in biomedical investigations.

Plasmonic-Nanopore Biosensors for Superior Single-Molecule Detection

Plasmonic and nanopore sensors have separately received much attention for achieving single-molecule precision. A plasmonic "hotspot" confines and enhances optical excitation at the nanometer length scale sufficient to optically detect surface-analyte interactions. A nanopore biosensor actively funnels and threads analytes through a molecular-scale aperture, wherein they are interrogated by electrical or optical means. Recently, solid-state plasmonic and nanopore structures have been integrated within monolithic devices that address fundamental challenges in each of the individual sensing methods and offer complimentary improvements in overall single-molecule sensitivity, detection rates, dwell time and scalability. Here, the physical phenomena and sensing principles of plasmonic and nanopore sensing are summarized to highlight the novel complementarity in dovetailing these techniques for vastly improved single-molecule sensing. A literature review of recent plasmonic nanopore devices is then presented to delineate methods for solid-state fabrication of a range of hybrid device formats, evaluate the progress and challenges in the detection of unlabeled and labeled analyte, and assess the impact and utility of localized plasmonic heating. Finally, future directions and applications inspired by the present state of the art are discussed.

Theoretical principles of Raman spectroscopy

This contribution reports on the theoretical foundations of Raman spectroscopy. Since the discovery of the Raman effect in 1928, Raman spectroscopy with its linear and nonlinear variants has established itself as a powerful analytical tool in almost all scientific fields (chemistry, physics, material sciences, pharmacy, biology, (bio)medicine, geology, mineralogy, environmental sciences, etc.). First, a short introduction to linear Raman spectroscopy is given, followed by two approaches to increase the intrinsically weak Raman signal, namely resonance Raman and surface enhanced Raman spectroscopy. The last part of this contribution briefly introduces nonlinear Raman processes observed using pulsed lasers as excitation sources.

Designing surface-enhanced Raman scattering (SERS) platforms beyond hotspot engineering: emerging opportunities in analyte manipulations and hybrid materials

Surface-enhanced Raman scattering (SERS) is a molecule-specific spectroscopic technique with diverse applications in (bio)chemistry, clinical diagnosis and toxin sensing. While hotspot engineering has expedited SERS development, it is still challenging to detect molecules with no specific affinity to plasmonic surfaces. With the aim of improving detection performances, we venture beyond hotspot engineering in this tutorial review and focus on emerging material design strategies to capture and confine analytes near SERS-active surfaces as well as various promising hybrid SERS platforms. We outline five major approaches to enhance SERS performance: (1) enlarging Raman scattering cross-sections of non-resonant molecules via chemical coupling reactions; (2) targeted chemical capturing of analytes through surface-grafted agents to localize them on plasmonic surfaces; (3) physically confining liquid analytes on non-wetting SERS-active surfaces and (4) confining gaseous analytes using porous materials over SERS hotspots; (5) synergizing conventional metal-based SERS platforms with functional materials such as graphene, semiconducting materials, and piezoelectric polymers. These approaches can be integrated with engineered hotspots as a multifaceted strategy to further boost SERS sensitivities that are unachievable using hotspot engineering alone. Finally, we highlight current challenges in this research area and suggest new research directions towards efficient SERS designs critical for real-world applications.

Laser writing of nanostructured silicon arrays for the SERS detection of biomolecules with inhibited oxidation

The present work reports the processing of laser irradiated Si arrays (LISi) and underlines their surface enhanced Raman scattering (SERS) functionality. A nanostructured Si/SiO_x surface forms providing additional fluidic and photoprotective properties. Because of their optical and surface characteristics, the arrays exhibit a SERS analytical enhancing factor of 500, without any noble metals such as gold or silver. Micro-Raman maps allowed studying LISi properties, identifying maximum amplification in nanostructured areas characterized by the presence of 7 nm Si nanocrystals. These structures are confined by a SiO_x layer as illustrated by XPS valence band measurements. The highly hydrophilic LISi areas allow a pre-concentration of target molecules prior to SERS analysis. A relevant application of LISi was found in the detection of apomorphine (APO), a drug used for the treatment of Parkinson's disease. In contrast with what is obtained by using gold SERS substrates, LISi allows the detection of APO with no sign of oxidation. This invites for the use of the Si/SiOx SERS detection in future systems for the personalized delivery of APO.