Impact of passivation on GaS nanoflakes: A study on stability, electronic, spectroscopy, and photocatalytic properties

This study uses first-principle calculations to investigate the properties of pristine and passivated gallium sulfide nanoflakes. Passivation significantly enhances stability, with fluorinated nanoflakes being the most stable and pristine nanoflakes the least stable, having formation energies of -0.058 eV/atom and -0.009 eV/atom, respectively. The pristine and passivated nanoflakes show semiconducting band gap, which lies in a visible region. Hydrogenated nanoflakes exhibit the largest band gap of 3.62 eV, making them highly suitable for photocatalysis, while fluorine and chlorine passivation result in band gaps of 3.16 eV and 3.01 eV. Scanning tunneling microscopy reveals distinct topographical features for each passivated nanoflake, affecting their electronic properties, including negative differential conductance, making it suitable for advanced switching devices and sensors. The quantum capacitance value of 815 µF/cm2 for chlorinated nanoflakes suggests that passivated nanoflakes could be beneficial for supercapacitor applications. Spectroscopic studies show that passivation changes the infrared spectrum and moves absorption spectra from the ultraviolet to the visible range. The hydrogenated nanoflakes are found ideal for water splitting, and adjusting the pH can further optimize its photocatalytic performance. These findings highlight the potential of passivated nanoflakes in photovoltaics, biomedical imaging, photocatalysis, and advanced technological devices.

According to forensic science recommendations, are carbon dots capable of reliably developing latent fingerprints?

Carbon dots (CDs) are zero-dimensional carbon nanomaterials that have been subject of considerable interest due to their remarkable electronic and optical characteristics. Their adjustable properties have gathered attention in different fields, including biological sensing, drug delivery, photodynamic therapy, photocatalysis, solar cells, and latent fingerprint development. In forensic science, the frequently reported outstanding photoluminescence behavior and biocompatibility of CDs are particularly important. Therefore, the objective of this systematic review was to assess the reliability of the results presented in studies proposing CD-based solutions for latent fingerprint development. By standardizing procedures, forensic science guidelines are valuable references that provide a framework for comparing new development materials with established ones. These publications were used to generate key points that allowed for a more objective evaluation of the reviewed studies. Our analysis revealed that most of the studies were conducted under rather limited conditions, with significant potential for bias in the presentation and evaluation of the new results achieved by the new CD-based developmental materials.

Live Cell Imaging Studies on Orange Emitting Thiazole-Pyridone Azo Fluorophore and Its Latent Fingerprints, Computational, Electrochemical Sensing for Dopamine Detection

The fluorescent materials have sparked a lot of research interests due to their unique electronic, optical and chemical characteristics. Here, we are intended to present a simple and facile synthesis of novel orange emitting thiazole-pyridone fluorescent tag (TPFT) by a simple diazo coupling reaction and the structural elucidation was carried out by IR, NMR (1H and 13C), UV-Vis, photoluminescence and HR-MS spectrometry. The solvatochromic behaviour of the TPFT offered crucial information about the formation of hydrazone and azo tautomeric forms. The DFT simulations are computed to calculate HOMO-LUMO energy gap (3.028 eV) of TPFT along with MEP and RDG analyses. Comprehensive LFP visualization is revealed under both normal and UV light conditions (365 nm). The cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to analyse the electrochemical behaviour of the TPFT-modified glassy carbon electrode (MGCE) and exhibited a lower detection limit of 7.89 × 10-8 M (S/N = 3) with a linear range of 0.5-8.0 μM for DA detection. The live-cell imaging study of TPFT showed a strong blue emission at 453 nm, which generally indicates the existence of fluorescence stability.

Solid-State Red Carbon Dots Based on Biomass Furan Derivatives

In the preparation of carbon dots (CDs), precursors are crucial, and abundant precursors endow CDs with various structures and fluorescence characteristics. Furan (FU) and its derivatives are considered excellent carbonization materials due to their π conjugated structures and active functional groups, such as hydroxyl and aldehyde groups. Herein, we prepare FU-derivative-based CDs by a solvothermal method and investigate the influences of the precursor structure on the fluorescence characteristics. Surprisingly, CDs prepared from 5-hydroxymethylfurfural (HMF) with both aldehyde and hydroxyl groups exhibit red-shifted fluorescence characteristics in the solid state. We postulate that this solid-state fluorescence characteristic is due to the enhancement of supramolecular cross-linking fluorescence between CDs. The unique precursor structure leads to carboxyl groups on the surface of HMF-CDs that are conducive to the hydrogen bond formation. As the concentration of CDs increases, the hydrogen bonding effect increases, leading to a red-shift in the fluorescence wavelength. Therefore, basically full-color CDs/poly(vinyl alcohol) (PVA) phosphor-based light-emitting diodes can be achieved by controlling the degree of supramolecular cross-linking of CDs in PVA. This research provides a new approach for the preparation of solid-state luminescent CDs.

Could artificial intelligence revolutionize the development of nanovectors for gene therapy and mRNA vaccines?

Gene therapy enables the introduction of nucleic acids like DNA and RNA into host cells, and is expected to revolutionize the treatment of a wide range of diseases. This growth has been further accelerated by the discovery of CRISPR/Cas technology, which allows accurate genomic editing in a broad range of cells and organisms in vitro and in vivo. Despite many advances in gene delivery and the development of various viral and non-viral gene delivery vectors, the lack of highly efficient non-viral systems with low cellular toxicity remains a challenge. The application of cutting-edge technologies such as artificial intelligence (AI) has great potential to find new paradigms to solve this issue. Herein, we review AI and its major subfields including machine learning (ML), neural networks (NNs), expert systems, deep learning (DL), computer vision and robotics. We discuss the potential of AI-based models and algorithms in the design of targeted gene delivery vehicles capable of crossing extracellular and intracellular barriers by viral mimicry strategies. We finally discuss the role of AI in improving the function of CRISPR/Cas systems, developing novel nanobots, and mRNA vaccine carriers.

One-step facile preparation of carbon dots with high fluorescence quantum yield and application in rapid latent fingerprint detection

The development of luminescent materials greatly affects the development of fluorescence imaging technology. The preparation of carbon dots (CDs) with high photoluminescence quantum yield (PLQY) in the solid-state is challenging due to excessive resonance energy transfer (RET) and direct π-π interactions. In this study, we synthesized carbon dots that exhibit green fluorescence (GCDs) with absolute PLQYs up to 35.65% in one step by a microwave-assisted method. In the solid-state, the absolute PLQY reached 19.25%. Then, the GCDs were mixed with soluble starch in appropriate proportions, which improved the adsorption and dispersion of the GCDs and greatly reduced the cost of the fingerprint powder, and increased the absolute PLQY of the fingerprint powder to 41.75%. Finally, we prepared GCDs for preliminary fabrication of luminescent films, and the GCD-starch powder was successfully applied to high-quality latent fingerprint (LFP) imaging. The related properties of GCDs and the LFP detection performance of fingerprint detection powders prepared by GCDs were studied in detail. The results showed that the LFP system developed with GCDs-starch powder visualized LFPs with high definition and contrast under different conditions, and GCDs had potential for application in light-emitting devices. This study developed a new type of solid-state luminescent CDs and demonstrated that these GCDs have great application potential for LFP detection. This study may also provide inspiration for other applications based on efficient solid-state fluorescence.

Excitation-independent deep-blue emitting carbon dots with 62% emission quantum efficiency and monoexponential decay profile for high-resolution fingerprint identification

Reaching emissive nanomaterials at short wavelengths with a high quantum efficiency (QE) is an attractive task for researchers. This is more demanding in carbon dots (CDs) with diverse applications that usually emit photons at wavelengths around 450-620 nm. In this study, deep blue-emissive doped-CDs (d-CDs) with high photoluminescence (PL) QE up to 62% and excitation-independent properties were prepared via a short-time microwave irradiation method. The prepared CDs showed simultaneous amorphous and crystalline features, with average sizes of 4.75 nm and bright emission color located at 422 nm. It was found that the presence of sulfur-related dopant levels plays a key role in emission properties in such a way that the PL signal drops significantly in the absence of N-acetyl-l-cysteine (NAC) as a dopant source. On the other hand, the trisodium citrate dihydrate (TSC) was selected as a carbon source to form the main carbon skeleton without it no emission was recorded. Monoexponential-fitted recombination trend with an average lifetime of about 10 ns also confirmed excellent PL emission properties with uniform energy levels and minimized defect-contributing recombinations. The practical use of the as-prepared N, S-doped CDs was assessed in fingerprint detection indicating a bright and clear scheme for both core and termination regions of the fingerprint. Simplicity, cost-effectiveness, high-product yield, low toxicity, along with high/stable PL quantum efficiency in deep-blue wavelengths, and demonstrated ability for fingerprint purposes, support the prospective application of these dual doped-CDs for sensing and bioimaging applications.

Fluorescence Enhancement of Dicyanomethylene-4H-Pyran Derivatives in Solid State for Visualization of Latent Fingerprints

The efficient development of latent fingerprint (LFP) is attractively important for criminal investigation. The low-cost and high-contrast developer is still a challenge. In this study, we designed and synthesized dicyanomethylene-4H-pyran (DCM) derivatives PZ-DCM and Boc-PZ-DCM by introducing of large steric hindrance group Boc, the solid-state fluorescence of DCM derivatives was greatly enhanced. The low-cost fluorescent LFP developers were prepared by blending with different proportion of montmorillonite (MMT). As a result, clear and high contrast fingerprint patterns were obtained with dusting method by the developer with 3% content of Boc-PZ-DCM. Furthermore, we employed the developer with 3% content of Boc-PZ-DCM to develop the sweat latent fingerprints on different substrates by powder dusting, and collected clear fingerprint patterns, indicating that the developer is universal. In a word, the Boc-PZ-DCM/MMT powder is a promising candidate for LFP developer.

Zn-assisted modification of the chemical structure of N-doped carbon dots and their enhanced quantum yield and photostability

This article presents the Zn-assisted synthesis of N-doped carbon dots (N-CDs) with an enhanced quantum yield (QY) and photostability. There have been intensive studies to improve or tune the optical properties of carbon dots (CDs) to meet the demand for luminescent materials in various fields, including energy conversion, photocatalysis, bioimaging, and phototherapy. For these applications, the photostability of the CDs is also a critical factor, but the related studies are relatively less common. The Zn-assisted N-CDs (denoted as Zn:N-CDs) obtained by the addition of Zn(OAc)2 to the precursors during the synthesis of N-CDs not only exhibited an enhanced quantum yield but also improved photostability compared to those of N-CDs. A comprehensive study of the chemical composition of Zn:N-CD and N-CD using X-ray photoelectron spectroscopy indicated a correlation between their chemical structure and photostability. Zn(OAc)2, which acts as a catalytic reagent, induced the modification of chemical structures at the edges of carbogenic sp2 domains, without being doped in N-CD, and the heteroatom-carbon bonds in Zn:N-CD seemed to be more resistant to light compared to those in N-CDs. The increased QY and photostability of Zn:N-CDs make them more suitable as an optical probe and they could be used in fingerprint identification. With Zn:N-CDs, the microstructure of fingerprints was confirmed clearly for a long duration effectively.

A Facile Microwave-Assisted Green Synthetic Approach of Solid-State Fluorescent Carbon-Dot Nanopowders Derived from Biowaste for Potential Latent-Fingerprint Enhancement

Latent fingerprint detection and visualization remains a challenge especially where problems of poor contrast, auto-fluorescent surfaces and patterned backgrounds are encountered. As a result there is an increasing interest in the development of simple, cost effective, rapid and yet accurate methods for latent fingerprint detection and recovery. Herein, this paper reports the synthesis of bright blue photoluminescent carbon dots (C-dots) via an eco-friendly and simple one-step microwave-assisted carbonization of potato peels’ biomass. The C-dots were prepared in only 3 min and ground into powder and used without any further treatment. The as-prepared C-dots were characterized using atomic force microscope, Fourier transform infra-red spectroscopy and X-ray diffraction with an average size of 1.0[Formula: see text]nm. The optical properties of the as-prepared C-dots were studied by UV-Vis spectroscopy and spectrofluorometer which established an excitation and emission wavelengths of 390[Formula: see text]nm and 480[Formula: see text]nm, respectively. Owing to their strong solid state fluorescence, the as-prepared C-dots’ powder was successfully used in latent fingerprint detection and imaging on porous and nonporous surfaces. Latent fingerprints were recovered with high resolution and excellent quality providing sufficient details for individual identification. These findings demonstrate that C-dots derived from biomass have a great potential in latent fingerprint analysis for forensic applications.

Towards Red Emissive Systems Based on Carbon Dots

Carbon dots (C-dots) represent an emerging class of nontoxic nanoemitters that show excitation wavelength-dependent photoluminescence (PL) with high quantum yield (QY) and minimal photobleaching. The vast majority of studies focus on C-dots that exhibit the strongest PL emissions in the blue/green region of the spectrum, while longer wavelength emissions are ideal for applications such as bioimaging, photothermal and photodynamic therapy and light-emitting diodes. Effective strategies to modulate the PL emission of C-dot-based systems towards the red end of the spectrum rely on extensive conjugation of sp2 domains, heteroatom doping, solvatochromism, surface functionalization and passivation. Those approaches are systematically presented in this review, while emphasis is given on important applications of red-emissive suspensions, nanopowders and polymer nanocomposites.

Magnetic perovskite nanoparticles for latent fingerprint detection

Fingerprints form when fingers touch a solid surfaceand are considered the best way for individual identification. However, the current latent fingerprint (LFP) developing methods cannot meet the demand for high sensitivity and being convenient and healthy. Herein, bifunctional Fe3O4@SiO2-CsPbBr3 powders have been designed and fabricated and exhibit good magnetic and strong fluorescent properties. The magnetism of Fe3O4 can avoid dust flying, while the fluorescence of CsPbBr3 ensures the high definition of LFPs. Clear fingerprints have been detected on various solid substrates using the Fe3O4@SiO2-CsPbBr3 powders instead of eikonogen. Detailed characterization studies suggest that the ammonium cationic groups on the surface of nanoparticles (NPs) have strong adhesive interactions with the residues of fingerprints because of the electrostatic attraction between them. Therefore, the convenient operation and excellent resolution offer great opportunity in the practical application of fingerprint detection and other areas.

A rich gallery of carbon dots based photoluminescent suspensions and powders derived by citric acid/urea

In this study we demonstrate simple guidelines to generate a diverse range of fluorescent materials in both liquid and solid state by focusing on the most popular C-dots precursors, i.e. the binary systems of citric acid and urea. The pyrolytic treatment of those precursors combined with standard size separation techniques (dialysis and filtration), leads to four distinct families of photoluminescent materials in which the emissive signal predominantly arises from C-dots with embedded fluorophores, cyanuric acid-rich C-dots, a blend of molecular fluorophores and a mixture of C-dots with unbound molecular fluorophores, respectively. Within each one of those families the chemical composition and the optical properties of their members can be fine-tuned by adjusting the molar ratio of the reactants. Apart from generating a variety of aqueous dispersions, our approach leads to highly fluorescent powders derived from precursors comprising excessive amounts of urea that is consumed for the build-up of the carbogenic cores, the molecular fluorophores and the solid diluent matrix that suppresses self-quenching effects.

Applications of Carbon Dots (CDs) in Latent Fingerprints Imaging

Carbon dots (CDs), a new member of the carbon-based material family, possess unique properties, such as high fluorescence, non-toxicity, eco-friendliness, stability and cost-effectiveness. These properties helped CDs to receive tremendous attention in various fields, namely, biological, opto-electronic, bio-imaging and energy-related applications. Although CDs are widely explored in bio-imaging and bio-sensing applications, their effectiveness in forensic science and technology is comparatively new. In this review, applications of CDs pertaining to latent FPs recovery since 2015 to 2020 is summarized comprehensively.

Preliminary studies into fluorescent semiconductor nanorods for the detection of latent fingermarks: Size matters, shape matters

The effect of the shape of semiconductor nanocrystals on their performance for visualising latent fingermarks was investigated for the first time. Highly luminescent CdSe/CdS core/shell nanocrystals in rod and spherical shapes were synthesised in organic solvent and transferred to aqueous solution using ligand exchange. The 3-mercaptopropionic acid coated nanorods and nanospheres were characterised using electron microscopy and UV-visible absorbance and luminescence spectrophotometry. A simple and rapid development of fresh to less than a week-old natural fingermarks from 4 donors (male and female) on non-porous surfaces including glass slides, aluminium foil and germanium disks using both CdSe/CdS core/shell nanorods and spherical dots was achieved, wherein nanorods demonstrated an enhanced development of ridge details in comparison to the spherical dots.

Quantifying contrast of latent fingerprints developed by fluorescent nanomaterials based on spectral analysis

Fluorescent nanoparticles (NPs) have been used to develop latent fingerprints with enhanced contrast. However, a method for quantifying the contrast is still lacking, making it impossible to achieve quantitative comparison in the contrast enhancement between different fingerprint developing agents. Here we proposed a new method to quantify the developed contrast using two indexes when fluorescent NPs were used to develop the latent fingerprint. One is the intensity index (I) defined as the ratio between the integrated fluorescence intensities of the signal and background in the fluorescence spectra of the developed fingerprint. Another is the chroma index (C) determined from the color difference between developed fingerprints and their substrates in the chromaticity graph. We defined the developed contrast as the product of the chroma index and the common logarithm of the intensity index (C·lg I), and validated this method using both down- and up-conversion fluorescent NPs and on a variety of different substrates (glass, marble, red paper and money). We showed that the developed contrast quantified by our method effectively reflected the true contrast but the intensity or chroma index alone was not always effective. This work opens up a new avenue to quantifying and enhancing the developed contrast.

Fluorescence spotting of latent sweat fingerprints with zinc oxide carbon dots embedded in a silica gel nanopowder: a green approach

In this research article, the green synthesized CZnO-dots/Si nanopowder is expended as the LFs fluorescent tagging agent by the dust blowing method.

"Luminescent carbon nanodots: Current prospects on synthesis, properties and sensing applications"

"Nanocarbon science" ignited interest owing to its substantial scope in biomedicine, energy and environment-beneficial applications. Carbon dots (C-dots), a multi-faceted nanocarbon material, emerged as a homologue to graphene and henceforth geared extensive investigation both on its properties and applications. Eximious properties like excitation-wavelength tunable fluorescence emission, up-converted photoluminescence, photon-induced electron transfer, low cytotoxicity, chiroptical behavior, high chemical and photostability set the ground for astounding applications of carbon dots. Abundant availability of raw "green" precursors complementary to other molecular/graphitic precursors make them environmentally benign, inexpensive and ultimately "nanomaterials of the current decade". This review focuses on the synthesis of carbon dots not only from natural sources but also from other carbonaceous precursors and contemplates the inherent but controversial properties. We also aim to garner the attention of readers to the recent progress achieved by C-dots in one of its prestantious area of applications as nanosensors.

Carbon Dots for Forensic Applications: A Critical Review

Owing to their superior fluorescence performance, inexpensive synthesis and nontoxic nature, carbon dots (C-dots) are systematically explored in a variety of applications; in this review, we outline and critically discuss recent trends with respect to their potential exploitation in criminal investigation, forensic toxicology and anti-counterfeit interventions. Capitalising on their colour-tuneable behaviour (in the sense that they adopt different colours with respect to the incident radiation), C-dot-based compositions are ideal for the visual enhancement of latent fingerprints, affording improved contrast against multicoloured and patterned backgrounds. As highly sensitive and highly selective optical nanoprobes, C-dots show excellent analytical performance in detecting biological compounds, drugs, explosives, heavy metals and poisonous reactants. In addition, benefiting from their versatile structural and chemical composition, C-dots can be incorporated into ink and polymeric formulations capable of functioning as a new generation of cost-effective barcodes and security nanotags for object authentication and anti-counterfeit applications. Translating these encouraging research outcomes into real-life innovations with significant social and economic impact requires an open, multidisciplinary approach and a close synergy between materials scientists, biologists, forensic investigators and digital engineers.

Red Fluorescent Carbon Dot Powder for Accurate Latent Fingerprint Identification using an Artificial Intelligence Program

Development and comparison of the latent fingerprints (LFPs) are two major studies in detection and identification of LFPs, respectively. However, integrated research studies on both fluorescent materials for LFP development and digital-processing programs for LFP comparison are scarcely seen in the literature. In this work, highly efficient red-emissive carbon dots (R-CDs) are synthesized in one pot and mixed with starch to form R-CDs/starch phosphors. Such phosphors are comparable with various substrates and suitable for the typical powder dusting method to develop LFPs. The fluorescence images of the developed LFPs are handled with an artificial intelligence program. For the optimal sample, this program presents an excellent matching score of 93%, indicating that the developed sample has very high similarity with the standard control. Our results are significantly better than the benchmark obtained by the traditional method, and thus, both the R-CDs/starch phosphors and the digital processing program fit well for the practical applications.

A simple and ubiquitous device for picric acid detection in latent fingerprints using carbon dots

This work addresses the synthetic optimization of carbon dots (CDs) and their application in sensing picric acid from latent fingerprints by exploiting a smartphone-based RGB tool. The optimization of the synthesis of CDs is investigated towards achieving shorter reaction time, better product yield and fluorescence quantum efficiency. Precursors such as citric acid and thiourea were chosen for the synthesis of CDs. Among the various synthetic methodologies, it is found that the pyrolysis method offers ∼50% product yield within 15 min. The morphology and optical properties of the prepared CDs are characterized using the typical microscopic and spectroscopic techniques, respectively. The synthesized CDs exhibit quasi-spherical shape with an average particle size of 1.7 nm. The excitation dependent emissive properties of CDs are investigated by time resolved fluorescence spectroscopy. Furthermore, the excellent fluorescence properties (φ = 11%) of CDs are explored as a fluorescent fingerprint powder for the identification of latent fingerprints on various substrates. In addition, the presence of picric acid in latent fingerprints was detected. Furthermore, this study is extended to perform real time detection of fingerprints and harmful contaminants in fingerprints by utilizing a smartphone-based RGB color analysis tool. Based on these investigations, the prepared CDs could be a prospective fluorescent material in the field of forensics.

Highly-selective recognition of latent fingermarks by La-sensitized Ce nanocomposites via electrostatic binding

A series of binuclear (Ce,La) nanocomposite fluorescent powders was elaborately designed for highly-selective recognition of latent fingermarks, which were proved to combine with fingermark residues electrostatically without any damage to touch-DNA.

In Vivo Cell Tracking, Reactive Oxygen Species Scavenging, and Antioxidative Gene Down Regulation by Long-Term Exposure of Biomass-Derived Carbon Dots

Biomass derived carbon dots (CD) have been observed to be excellent bioimaging probes due to their nontoxic, stable fluorescence, lesser bleachability, and excellent bioconjugation properties. In the current study, green chili extract derived CD synthesis via microwave irradiation is reported. The time dependent top down degradation of carbonaceous materials to CD are monitored via electron microscopy and correlated with fluorescence intensity. Further, the CD were explored for long-term cell tracking and cell therapy monitoring in a rodent model to study wound healing kinetics. The cells were monitorable up to 21 days (until the entire wound healed). CD were observed to scavenge reactive oxygen species (ROS) in vitro and in vivo and provided control over ROS scavenging enzyme gene expressions via down regulation. Further, it was observed to remodel the wound healing kinetics via altering granulation tissue distribution and formation of microvessels to establish the capability of CD to enhance wound healing.

Recognition of Latent Fingerprints and Ink-Free Printing Derived from Interfacial Segregation of Carbon Dots

Carbon dots (CDs) have attracted increasing interest in recent years owing to their desirable properties. Despite the availability of diverse elaborate CDs, the function and application of CDs are far to be fully exploited. Here, biomass-derived carbon dots dispersed in a polymer matrix are found to behave as ink-free patterned substrates, which are demonstrated to be useful for nondestructive collection and recognition of latent fingerprints (LFPs), as well as printing. The coating of CD/poly(vinyl alcohol) solution on a LFP yields a flexible transparent film; a stable fluorescent fingerprint with clear ridge details enabling personal identification is formed on this film. Encouragingly, this method can be applied to nondestructively lift and recognize long-timely exposed LFPs from various surfaces. The mechanism for LFP collection and visualization is proposed, which should be ascribed to the interfacial segregation of CDs in the polymer matrix during the film forming process. This mechanism is further validated by and utilized for application of CD/polymer composites in relief printing, intaglio printing, and micro-trace transferring.

Facile Fluorescence "Turn on" Sensing of Lead Ions in Water via Carbon Nanodots Immobilized in Spherical Polyelectrolyte Brushes

Heavy metal detection has become very important for the protection of water resource. In this work, a novel controllable probe is presented for the sensitive detection of Pb2+ in aqueous solutions. The probe was synthesized via the immobilization of surface functionalized carbon dots (named as CAEA-Hs) into the shell of the spherical polyelectrolyte brushes (SPB). The fluorescence of CAEA-H was firstly "turned off" via electrostatic interaction induced quenching. Based on the aggregation induced emission enhancement (AIEE), the fluorescence of the immobilized CAEA-H could be specifically turned on via the aggregation of the SPB particles. This fluorescence "turn on" sensor could selectively detect Pb2+ among five different metal ions with a relatively wide detecting range (0-1.67 mM) and good linear relationship (R 2 = 0.9958). Moreover, the aggregating behavior and nano-structure of CAEA-H loaded SPB have been systematically analyzed via small angle X-ray scattering, turbidity titration, and Zeta-potential measurement. Based on a series of control experiments, we finally gain an insight into the sensing mechanism of this novel sensing probe. This contributed a proof of concept demonstration that sensitive and selective chemical detection can be achieved via a C-dot/SPB synergistic platform.

Color-Tunable Binuclear (Eu, Tb) Nanocomposite Powder for the Enhanced Development of Latent Fingerprints Based on Electrostatic Interactions

Fluorescence color of rare earth-based nanopowder can be modulated by regulating the molar ratio of components, which offers a promising strategy in many fields of applications. Herein, a series of binuclear Eu _xTb_{1- x}(AA)₃Phen ( x = 1, 0.75, 0.5, 0.25, 0.1, 0) complexes were fabricated using acrylic acid (AA) as the first ligand and using 1,10-phenanthroline (Phen) as the second ligand. The characterization results showed that this novel binuclear (Eu, Tb) complex can emit strong red or green light via simply varying the molar ratio of europium and terbium. Moreover, the results of spectroscopic and zeta potential analyses suggested that there was an electrostatic adherence mode in the interaction between the Eu _xTb_{1- x}(AA)₃Phen complex and fingerprint residues. Importantly, our Eu _xTb_{1- x}(AA)₃Phen nanopowder was successfully applied to the enhanced development of latent fingerprints on various surfaces by the powder dusting method, exhibiting a high contrast, sensitivity, and selectivity, as well as a low detection limit in forensic science, which was further confirmed by analysis with an automatic fingerprint identification system. In summary, our synthetic rare earth-based nanopowder exhibits promise as an ideal fluorescent probe for the enhanced development of latent fingerprints, based not only on physical absorption at the macrolevel but also on electrostatic interactions between our rare earth complex and fingerprint residues at the molecular level, which could provide an enhanced affinity compared with traditional fingerprint powders.

Fluorescence development of fingerprints by combining conjugated polymer nanoparticles with cyanoacrylate fuming

Selecting appropriate developing methods/reagents or their combination to enhance the effect for fingerprint development is of great significance for practical forensic investigation. Ethyl-2-cyanoacrylate ester (superglue) fuming is a popular method for "in-situ" developing fingerprints in forensic science, followed by fluorescence staining to enhance the contrast of the fingerprint image in some occasion. In this study, a series of fluorescent poly(p-phenylene vinylene) (PPV) nanoparticles (NPs) in colloidal solution were successfully prepared and the emission color was tuned via a simple way. The fuming process was carried out using a home-made device. The staining was accomplished by immersing a piece of absorbent cotton into the solution of NPs, and then gently applied on the fumed fingerprints for several times. The PPV NPs were found to have a better developing effect than Rhodamine 6G when excited by 365 nm UV lamp. Different emission colors of NPs are advantageous in developing fingerprints on various substrates. Mechanism study suggested that the NPs were embedded in the porous structure of the superglue resin. In all, the combination of fuming method with the staining by conjugated polymer NPs has been demonstrated to be successful for fluorescent fingerprint development and be promising for more practical forensic applications.

A novel monodisperse SiO2@C-dot for the rapid and facile identification of latent fingermarks using self-quenching resistant solid-state fluorescence

Solid powder fluorescence shows great potential for application in medicine, biology, and engineering, especially in the identification of latent fingermarks in forensic science. However, conventional developing methods suffer from some drawbacks, such as low contrast, low sensitivity, low selectivity, and high toxicity. To conquer these challenges, novel SiO2@C-dot microspheres were prepared via a facile one-pot hydrothermal method by using citric acid as a carbon source and aminosilane as a nitrogen source. Interestingly, the results showed that the resultant powders possess good monodispersity, high fluorescence emission, and resistance to self-quenching. Additionally, the mechanism for the solid-state fluorescence of SiO2@C-dot compounds was also investigated. More importantly, the fingermarks on various surfaces, including transparent glasses, ceramic tiles, transparent plastics, aluminum alloys, plastic cards, painted woods, artificial leathers, and Chinese paper money, developed by the powders have indicated well-defined papillary ridges under a 365 nm UV lamp. The novel strategy of using monodisperse SiO2@C-dot microspheres as a fluorescent label for developing latent fingermarks showed greater advantages compared to conventional methods, which was also demonstrated using the automatic fingerprint identification system. It is simple, rapid, low-cost, nontoxic, and effective, and is expected to be a promising alternative for the development of latent fingerprints in forensic science.

Carbon dots for promoting the growth of ZIF-8 crystals to obtain fluorescent powders and their application for latent fingerprint imaging

Green and controllable synthesis of carbon dots/ZIF-8 fluorescent powders for latent fingerprint imaging.

Dramatic photoluminescence quenching in carbon dots induced by cyclic voltammetry

We disclose an electrochemically activated quenching mechanism that is dominant in certain types of C-dots.