Tannic Acid Film Based on One-Dimensional Supramolecular Self-Assembly for Electrical Conductivity and Oil-Water Separation

Tannic acid is widely regarded as one of the most promising natural polyphenolic compounds. However, current research predominantly focuses on the utilization of its phenolic hydroxyl groups, with limited exploration of the functional potential of its aromatic structure. Herein, one-dimensional nanofibers based on supramolecular self-assembly were successfully prepared through the simple alkylation reaction of tannic acid and the π-π stacking of aromatic structures. These fibers, with lengths reaching tens of micrometers and an average height of 10 nm, were clearly observed using SEM and AFM. A film with excellent electrical conductivity (σ = 37.9 μS/cm) was fabricated by vacuum filtering the organic suspension of these fibers, which was 100-fold higher than that of the TA film. Additionally, the hydrophobic and lipophilic properties of Bn-TA were further investigated through oil-water separation experiments, where the Bn-TA membrane displayed excellent separation efficiency and durability, maintaining stable performance over multiple cycles. This strategy presents opportunities for the high-value utilization of tannic acid.

Sustainable Secondary-Raw Materials, Natural Substances and Eco-Friendly Nanomaterial-Based Approaches for Improved Surface Performances: An Overview of What They Are and How They Work

To meet modern society’s requirements for sustainability and environmental protection, innovative and smart surface coatings are continually being developed to improve or impart surface functional qualities and protective features. These needs regard numerous different sectors, such as cultural heritage, building, naval, automotive, environmental remediation and textiles. In this regard, researchers and nanotechnology are therefore mostly devoted to the development of new and smart nanostructured finishings and coatings featuring different implemented properties, such as anti-vegetative or antibacterial, hydrophobic, anti-stain, fire retardant, controlled release of drugs, detection of molecules and mechanical resistance. A variety of chemical synthesis techniques are usually employed to obtain novel nanostructured materials based on the use of an appropriate polymeric matrix in combination with either functional doping molecules or blended polymers, as well as multicomponent functional precursors and nanofillers. Further efforts are being made, as described in this review, to carry out green and eco-friendly synthetic protocols, such as sol–gel synthesis, starting from bio-based, natural or waste substances, in order to produce more sustainable (multi)functional hybrid or nanocomposite coatings, with a focus on their life cycle in accordance with the circular economy principles.

Biomimetic anti-inflammatory and osteogenic nanoparticles self-assembled with mineral ions and tannic acid for tissue engineering

Bone healing involves complex processes including inflammation, induction, and remodeling. In this context, anti-inflammatory and osteoconductive multi-functional nanoparticles have attracted considerable attention for application in improved bone tissue regeneration. In particular, nanoparticles that promote suppression of inflammatory response after injury and direction of desirable tissue regeneration events are of immense interest to researchers. We herein report a one-step method to prepare multi-functional nanoparticles using tannic acid (TA) and simulated body fluid (SBF) containing multiple mineral ions. Mineral-tannic acid nanoparticles (mTNs) were rapidly fabricated in 10 min, and their size (around 250-350 nm) and chemical composition were controlled through the TA concentration. In vitro analysis using human adipose derived stem cells (hADSCs) showed that mTNs effectively scavenged reactive oxygen species (ROS) and enhanced osteogenesis of hADSCs by inducing secretion of alkaline phosphatase. mTNs also increased osteogenic marker gene expression even in the presence of ROS, which can generally arrest osteogenesis (OPN: 1.74, RUNX2: 1.90, OCN: 1.47-fold changes relative to cells not treated with mTNs). In vivo analysis using a mouse peritonitis model revealed that mTNs showed anti-inflammatory effects by decreasing levels of pro-inflammatory cytokines in blood (IL-6: 73 ± 4, TNF-α: 42 ± 2%) and peritoneal fluid (IL-6: 78 ± 2, TNF-α: 21 ± 6%). We believe that this one-step method for fabrication of multi-functional nanoparticles has considerable potential in tissue engineering approaches that require control of complex microenvironments, as required for tissue regeneration.

Neurotoxicity and Structure-Activity Relationships of Resveratrol and its two Natural Analogs, 4,4′-Dihydroxystilbene and Pinosylvin

Resveratrol (RES) and its two natural analogues, 4,4′-dihydroxystilbene (DHS) and pinosylvin (PIN), are very important polyphenols and have attracted considerable pharmaceutical interest because of their diverse biological activities. However, their adverse effects on motor nerves and glioma cells have not been properly assessed. Herein, we surveyed the toxicity and analyzed the structure-activity relationship of these three polyphenols using transgenic zebrafish ( Danio rerio) and U87. Results indicated that, in zebrafish embryos, both DHS (1 and 10 μg/mL) with hydroxyl groups at the 4 and 4′ positions, and PIN (1 and 10 μg/mL) with hydroxyl groups at the 3 and 5 positions inhibited motor neuron growth more effectively than RES (1 and 10 μg/mL) with hydroxyl groups at the 3, 4′, and 5 positions, although their appearance is normal. Both the DHS- (10 μg/mL) and PIN (10 μg/mL) -treated groups significantly reduced the swimming distance of zebrafish compared with the RES (10 μg/mL) -treated group. In addition, DHS with the hydroxyl groups at the 4 and 4′ positions (0.002, 0.02, 0.2, 2, and 20 μM) inhibited U87 cell aggregation in a concentration-dependent manner; PIN with the hydroxyl groups at the 3 and 5 positions (0.002, 0.02, 0.2, 2, and 20 μM) promoted U87 cell aggregation in a concentration-dependent manner, while RES with three hydroxyl groups promoted U87 cell aggregation at concentrations from 0.2 to 2 μM. Taken together, DHS and PIN are more neurotoxic than RES. The position and number of hydroxyl groups significantly affected the ability of the polyphenols to aggregate into tumors in the U87 cell.

Chemo-Biological Upcycling of Poly(ethylene terephthalate) to Multifunctional Coating Materials

Chemo-biological upcycling of poly(ethylene terephthalate) (PET) developed in this study includes the following key steps: chemo-enzymatic PET depolymerization, biotransformation of terephthalic acid (TPA) into catechol, and its application as a coating agent. Monomeric units were first produced through PET glycolysis into bis(2-hydroxyethyl) terephthalate (BHET), mono(2-hydroxyethyl) terephthalate (MHET), and PET oligomers, and enzymatic hydrolysis of these glycolyzed products using Bacillus subtilis esterase (Bs2Est). Bs2Est efficiently hydrolyzed glycolyzed products into TPA as a key enzyme for chemo-enzymatic depolymerization. Furthermore, catechol solution produced from TPA via a whole-cell biotransformation (Escherichia coli) could be directly used for functional coating on various substrates after simple cell removal from the culture medium without further purification and water-evaporation. This work demonstrates a proof-of-concept of a PET upcycling strategy via a combination of chemo-biological conversion of PET waste into multifunctional coating materials.

Integrating Antioxidant Functionality into Polymer Materials: Fundamentals, Strategies, and Applications

While antioxidants are widely known as natural components of healthy food and drinks or as additives to commercial polymer materials to prevent their degradation, recent years have seen increasing interest in enhancing the antioxidant functionality of newly developed polymer materials and coatings. This paper provides a critical overview and comparative analysis of multiple ways of integrating antioxidants within diverse polymer materials, including bulk films, electrospun fibers, and self-assembled coatings. Polyphenolic antioxidant moieties with varied molecular architecture are in the focus of this Review, because of their abundance, nontoxic nature, and potent antioxidant activity. Polymer materials with integrated polyphenolic functionality offer opportunities and challenges that span from the fundamentals to their applications. In addition to the traditional blending of antioxidants with polymer materials, developments in surface grafting and assembly via noncovalent interaction for controlling localization versus migration of antioxidant molecules are discussed. The versatile chemistry of polyphenolic antioxidants offers numerous possibilities for programmed inclusion of these molecules in polymer materials using not only van der Waals interactions or covalent tethering to polymers, but also via their hydrogen-bonding assembly with neutral molecules. An understanding and rational use of interactions of polyphenol moieties with surrounding molecules can enable precise control of concentration and retention versus delivery rate of antioxidants in polymer materials that are critical in food packaging, biomedical, and environmental applications.

One-step hydrophobization of tannic acid for antibacterial coating on catheters to prevent catheter-associated infections

Catheter-associated infections (CAIs) caused by bacterial colonization are significant problems in clinics. Thus, effective antibacterial coatings for biomedical catheters to prevent bacterial infections are urgently needed. Ideal coatings should include the advantage of potent antibacterial properties and being easily and economically modified on the catheter surface. Due to their advantages of adhesive capability on various substrates, an increasing number of coatings based on plant polyphenols have been developed. However, the hydrophilicity of plant polyphenols limits their utilization in coatings. Herein, hydrophobic tannic acid (TA) was synthesized via the one-step electrostatic assembly of TA and benzalkonium chloride (BAC) with the green solvent water as the medium. The as-prepared hydrophobic TA (TBA) facilely formed a stable and colorless coating on the luminal and outer surface of biomedical catheters with broad-spectrum antibacterial activity and biocompatiblity. It was demonstrated that the TBA-coated surfaces displayed excellent bactericidal activity toward Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli), and more than 99% of the above bacteria were killed by the TBA-coated films. The test of the coated catheters in vitro also showed the excellent antibacterial activity of both the outer and luminal surfaces of the catheter. Moreover, in an in vivo mouse model, the coated catheters relatively prevented bacterial colonization compared to the uncoated catheters. Meantime, no significant cytotoxicity and host response for Cell Counting Kit-8 (CCK-8) and tissue compatibility in vivo were observed, indicating the better biocompatibility of the TBA coating. This preparation method overcomes the limitation of the traditional hydrophilic tannic acid as a coating and provides a new method for preventing medical indwelling device-associated infections.

Valorization of Carob Fruit Residues for the Preparation of Novel Bi-Functional Polyphenolic Coating for Food Packaging Applications

The food industry has become interested in the development of innovative biomaterials with antioxidant and antimicrobial properties. Although several biopolymers have been evaluated for food packaging, the use of polyphenolic coatings has been unexplored. The purpose of this work was to develop an antioxidant and antimicrobial coating for food packaging through the polymerization of carob phenolics. At first, the polyphenolic coatings were deposited in glass surfaces polymerizing different concentrations of carob extracts (2 and 4 mg mL⁻¹) at three pH values (7, 8 and 9). Results demonstrated that the coating produced at pH 8 and at a concentration of 4 mg mL⁻¹ had the most potent antioxidant and antimicrobial potential. Then, the coating was applied directly on the salmon fillet (coating) and on the plastic container (active packaging). Peroxide and thiobarbituric acid-reactive substances (TBARS) methods were used to measure the potency to inhibit lipid oxidation in salmon fillets. Furthermore, the anti-Listeria activity of coatings was also assessed. Results showed a significant decrease of lipid oxidation during cold storage of salmon fillets for both treatments; the superiority of applied coating directly on the salmon fillets was also highlighted. Regarding the antimicrobial potency, the polyphenolic coating depleted the growth of Listeria monocytogenes after 10 days storage; while the active packaging had no effect on Listeria monocytogenes. Overall, we describe the use of low-cost carob polyphenols as precursors for the formation of bifunctional coatings with promising applications in food packaging.

In Vitro Performance of Bioinspired Phenolic Nanocoatings for Endosseous Implant Applications

In the quest for finding new strategies to enhance tissue integration and to reduce the risk of bacterial colonization around endosseous implants, we report the application of auto-oxidative phenolic coatings made of tannic acid and pyrogallol to titanium surfaces. The functionalized surfaces were screened for their biological performance using cultures of primary human osteoblasts and biofilm-forming bioluminescent staphylococci S. epidermidis Xen43 and S. aureus Xen29. No toxic effect of the coatings on osteoblasts was detected. While tannic acid coatings seemed to induce a delay in osteoblast maturation, they revealed anti-inflammatory potential. Similar effects were observed for pyrogallol coatings deposited for 24 h. Thin pyrogallol coatings deposited for 2 h seemed to promote osteoblast maturation and revealed increased calcium deposition. The effects on osteoblast were found to be related to the release of phenolic compounds from the surfaces. While the phenolic coatings could not inhibit staphylococcal biofilm formation on the titanium surfaces, released phenolic compounds had an inhibitory effect the growth of planktonic bacteria. In conclusion, the assessed coating systems represent a versatile functionalization method which exhibit promising effects for endosseous implant applications.

Selective Antimicrobial Effects of Curcumin@Halloysite Nanoformulation: A Caenorhabditis elegans Study

Alterations in the normal gastrointestinal microbial community caused by unhealthy diet, environmental factors, and antibiotic overuse may severely affect human health and well-being. Novel antimicrobial drug formulations targeting pathogenic microflora while not affecting or even supporting symbiotic microflora are urgently needed. Here we report fabrication of a novel antimicrobial nanocontainer based on halloysite nanotubes loaded with curcumin and protected with a dextrin outer layer (HNTs+Curc/DX) and its effective use to suppress the overgrowth of pathogenic bacteria in Caenorhabditis elegans nematodes. Nanocontainers have been obtained using vacuum-facilitated loading of hydrophobic curcumin into halloysite lumens. We have applied UV-vis and infrared spectroscopy, thermogravimetry and microscopy to characterize the HNTs+Curc/DX nanocontainers. In experiments in vitro we found that HNTs+Curc/DX effectively suppressed the growth of Serratia marcescens cells, whereas Escherichia coli bacteria were not affected. We applied HNTs+Curc/DX nanocontainers to alleviate the S. marcescens infection in C. elegans nematodes in vivo. The nematodes ingest HNTs+Curc/DX at 4-6 ng per worm, which results in improvement of the nematodes' fertility and life expectancy. Remarkably, treatment of S. marcescens-infected nematodes with HNTs+Curc/DX nanocontainers completely restored the longevity, demonstrating the enhanced bioavailability of hydrophobic curcumin. We believe that our results reported here open new avenues for fabrication of effective antimicrobial nanoformulations based on hydrophobic drugs and clay nanotubes.

Plant tannin immobilized Fe3O4@SiO2 microspheres: A novel and green magnetic bio-sorbent with superior adsorption capacities for gold and palladium

In this paper, a new core-shell nanostructured magnetic bio-based composite was prepared by immobilizing persimmon tannin (PT) onto Fe₃O₄@SiO₂ microspheres, and the as designed Fe₃O₄@SiO₂@PT was utilized for adsorptive recovery of Au(III) and Pd(II). The preparation, morphology, composition and magnetic property of Fe₃O₄@SiO₂@PT were characterized. Adsorption parameters of Fe₃O₄@SiO₂@PT towards Au(III) and Pd(II) including initial pH, reaction time, initial concentration of metal ions, effect of acidity and interference of coexisting metal ions were investigated. It is sufficiently confirmed that silica was coated on Fe₃O₄ and persimmon tannin was immobilized on aminated Fe₃O₄@SiO₂. The thickness of silica and loaded persimmon tannin are around 18 nm and 14 nm, respectively. With only 1.00 wt% of persimmon tannin, however, the maximum adsorption capacities of Fe₃O₄@SiO₂@PT for Au(III) and Pd(II) were as high as 917.43 and 196.46 mg·g^-1, respectively. In addition, after adsorption of Au(III) and Pd(II), the magnetization saturation values (Ms) of Fe₃O₄@SiO₂@PT were high enough to guarantee efficient magnetic seperation. Metallic gold could be facilely recovered from wastewaters containing Au(III).

Disentangling structure-dependent antioxidant mechanisms in phenolic polymers by multiparametric EPR analysis

Excellent and selective correlations between the electron-transfer (ET) or hydrogen atom transfer (HAT) capacity (DPPH and lipid peroxidation inhibition assays) and EPR indices of π-electron spin delocalization delineate specific structural determinants of antioxidant activity in biomimetic phenolic polymers.

Catechol/polyethyleneimine conversion coating with enhanced corrosion protection of magnesium alloys: potential applications for vascular implants

A catechol/polyethyleneimine conversion coating on a MgZnMn alloy possessed good corrosion resistance. Heparin was further grafted on it and this showed the potential for surface modification of magnesium-based vascular implants.

Tannic acid-loaded mesoporous silica for rapid hemostasis and antibacterial activity

The as-prepared tannic acid (TA)-load mesoporous silica via electrostatic adsorption (TMS) exhibited excellent hemorrhage control by both TA-induced faster blood contact and plasma protein crosslinking, and MS-initiated water absorption, blood components concentration and coagulation factors activation, and good antibacterial properties.

Phenolic Modified Ceramic Coating on Biodegradable Mg Alloy: The Improved Corrosion Resistance and Osteoblast-Like Cell Activity

Magnesium alloys have great potential for developing orthopedic implants due to their biodegradability and mechanical properties, but the rapid corrosion rate of the currently-available alloys limits their clinical applications. To increase the corrosion resistance of the substrate, a protective ceramic coating is constructed by a micro-arc oxidation (MAO) process on ZK60 magnesium alloy. The porous ceramic coating is mainly composed of magnesium oxide and magnesium silicate, and the results from cell cultures show it can stimulate osteoblastic cell growth and proliferation. Moreover, gallic acid, a phenolic compound, was successfully introduced onto the MAO coating by grafting on hydrated oxide and chelating with magnesium ions. The gallic acid and rough surface of MAO altered the cell attachment behavior, making it difficult for fibroblasts to adhere to the MAO coating. The viability tests showed that gallic acid could suppress fibroblast growth and stimulate osteoblastic cell proliferation. Overall, the porous MAO coating combined with gallic acid offered a novel strategy for increasing osteocompatibility.

All-Aqueous Nanoprecipitation: Spontaneous Formation of Hydrogen-Bonded Nanoparticles and Nanocapsules Mediated by Phase Separation of Poly(N-Isopropylacrylamide)

Spontaneous formation of polymer nanoparticles of well-defined, <100 nm sizes with controlled solid/hollow morphology and fluorescent properties is reported. The nanoparticle formation is assisted by temperature-triggered nucleation of an amphiphilic polymer-poly(N-isopropylacrylamide) (PNIPAM)-and mediated by hydrogen bonding of the emerged nuclei with tannic acid (TA). The pH of solution and TA/PNIPAM ratios are explored as parameters that define TA/PNIPAM assembly. Well-defined nanoparticles are formed in a wide range of neutral pH when the TA/PNIPAM ratio exceeds its critical, pH-dependent value. Dynamic light scattering and zeta potential measurements as well as atomic force microscopy and electron energy loss spectroscopy indicate that solid nanoparticles or nanocapsules are formed depending on the solution pH and that enhanced ionization of TA favors hollow morphology. Nanocapsules exhibit label-free fluorescence at neutral pH values and therefore can be useful in imaging applications.

Formation of Turmeric-Based Thin Films: Universal, Transparent Coatings

Curry stains on clothes and dishes in daily life inspired us to investigate the potential use of turmeric powder, the major ingredient in curry, as a universal coating material. After condition optimization, the coating solution was made by boiling and filtering a turmeric slurry, and the coating was formed at pH 3, leading to the formation of ultrathin, transparent films. Various inorganic and polymeric substrates were successfully coated with turmeric-based materials, including gold, TiO₂, SiO₂, glass, stainless steel, indium tin oxide, nylon, polyethylene, polycarbonate, polypropylene, acryl, and poly(ethylene terephthalate). The turmeric-based coating was also applied to poly(tetrafluoroethylene) (PTFE, Teflon) and cyclic olefin copolymer (COC), and after double dip-coating, the water contact angle was changed from 118.2° to 49.1° for PTFE and from 91.2° to 44.7° for COC. The water contact angles for the other substrates converged to 35° after coating, confirming the substrate-independent universal coating capability of turmeric. The X-ray photoelectron spectroscopic analysis indicated the presence of nitrogen in the film, and the possible involvement of amines in film formation was investigated with several amine compounds.

Electrophoretic deposition of colloidal particles on Mg with cytocompatibility, antibacterial performance, and corrosion resistance

Magnesium (Mg) has recently received increasing attention due to its unique biological performance, including cytocompatibility, antibacterial and biodegradable properties. However, rapid corrosion in physiological environment and potential toxicity limits its clinical applications. To improve the corrosion resistance meanwhile not compromise other excellent performance, self-assembled colloidal particles were deposited onto magnesium surfaces in ethanol by a simple and effective electrophoretic deposition (EPD) method. The fabricated functional nanostructured coatings were investigated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) analyses, and scanning electron microscopy (SEM). The electrochemical test, pH value, and Mg ion concentration data show that the corrosion resistance of Mg samples is enhanced appreciably after surface treatment. In vitro cellular response and antibacterial capability of the modified Mg substrates are performed. Significantly increased cell adhesion and viability are observed from the coated Mg samples, and the amounts of adherent bacteria on the treated Mg surfaces diminish remarkably compared to the bare Mg. Furthermore, the bare and coated Mg samples were implanted in New Zealand white rabbits for 12 weeks to examine the in vivo long-term corrosion performance and in situ inflammation behavior. The experiment results confirmed that compared with bare Mg substrate the corrosion and foreign-body reactions of the coated Mg samples were suppressed. The above results suggested that our coatings, which effectively enhance the biocompatibility, antimicrobial properties, and corrosion resistance of Mg substrate, provide a simple and practical strategy to expedite clinical acceptance of biodegradableMg and its alloys.

STATEMENT OF SIGNIFICANCE

Biomedical Mg metals have been considered as promising biodegradable implants because of their intended functions, such as cytocompatibility, antibacterial, and biodegradable properties. However, rapid corrosion in physiological environment limits their clinical applications. Alloying and surface coatings have been used to reduce the degradation rate. But this would compromise other excellent performance of Mg samples, including antibacterial and anti-inflammatory activity. Thus, while the rapid degradation of Mg samples must be solved, good antibacterial property and acceptable cytocompatibility are also necessary. In this study, polymer-based coatings were fabricated on Mg surfaces by electrophoretic deposition of poly(isobornyl acrylate-co-dimethylaminoethyl methacrylate)/tannic acid (P(ISA-co-DMA)/TA) colloidal particles. It suggested that the coating materials effectively improved the biocompatibility, antimicrobial behavior, and corrosion resistance of biomedical Mg.