Understanding the hydrogen bonds in ionic liquids and their roles in properties and reactions

Does the active hydrogen atom in the hydantoin anion affect the physical properties, CO2 capture and conversion of ionic liquids?

Compared to the effect of the active hydrogen atom in the cation in protic ionic liquids (ILs) on their properties and applications, there are very few reports on the role of the active hydrogen atom in the anion. In order to better understand the role of the active hydrogen atom in the anion, the physical properties, CO2 capture and conversion of three hydantoin-based anion-functionalized ILs ([P4442][Hy], [P4442]2[Hy], and [HDBU][Hy]) have been investigated via experiments, spectroscopy, and DFT calculations in this work. The results show that the active hydrogen atom in the anion can form anionic hydrogen bonding networks, which significantly increase the melting point and viscosity and decrease the basicity of the IL, thereby weakening its ability to capture and convert CO2. Interestingly, [P4442][Hy] undergoes a solid/liquid two-phase transition during CO2 absorption/desorption due to the formation of quasi-intramolecular hydrogen bonding between the active hydrogen atom and the O- atom of the absorbed CO2, suggesting that the presence of the active hydrogen atom gives [P4442][Hy] the potential to be an excellent molecular switch. As there is no active hydrogen atom in the anion of [P4442]2[Hy], it shows excellent CO2 capture and conversion performance through the double-site interaction. [HDBU][Hy] shows the weakest catalytic CO2 conversion due to the presence of active hydrogen atoms on both its anion and cation. Therefore, the active hydrogen atom in the anion may play a more important role in the properties and potential applications of ILs than the active hydrogen atom in the cation.

Toward Greater DNA Stability by Leveraging the Proton-Donating Ability of Protic Ionic Liquids

Deoxyribonucleic acid (DNA) stability is a prerequisite in many applications, ranging from DNA-based vaccines and data storage to gene therapy. However, the strategies to enhance DNA stability are limited, and the underlying mechanisms are poorly understood. Ionic liquids (ILs), molten salts of organic cations and organic/inorganic anions, are showing tremendous prospects in myriads of applications. With a judicious choice of constituent ions, the protic nature of ILs can be tuned. In this work, we investigate the relative stability of full-length genomic DNA in aqueous IL solutions of increasing protic nature. Our experimental measurements show that the protic ionic liquids (PILs) enhance the DNA melting temperature significantly while unaltering its native B-conformation. Molecular dynamics simulations and quantum mechanical calculation results suggest that the intramolecular Watson-Crick H-bonding in DNA remains unaffected and, in addition, the PILs induce stronger H-bonding networks in solution through their ability to make multiple intermolecular H-bonds with the nucleobases and among its constituent ions, thus aiding greater DNA stability. The detailed understanding obtained from this study could bring about the much-awaited breakthrough in improved DNA stability for its sustained use in the aforesaid applications!

Revisiting ion-pair interactions in phase transfer catalysis: from ionic compounds to real catalyst systems

Ion-pairing is a fundamental phenomenon that significantly influences phase-transfer catalysis. In this study, we conduct a comprehensive investigation of ion-pair interactions, aiming to establish a comprehensive understanding of their nature and implications. The study begins with the examination of polar ionic compounds to define the concept of an ion-pair in the context of phase-transfer catalysis. Subsequently, a diverse range of ion-pair catalyst models were explored to gain insight into the factors governing their interactions. Finally, the focus shifts towards the characterisation of real phase-transfer catalysts, bridging the gap between theoretical models and practical applications. Through a combination of computational approaches and theoretical analysis, this work provides valuable insight into the nature of ion-pair interactions within phase-transfer catalysis fields.

Towards molecularly imprinted polymers that respond to and capture phosphorylated tyrosine epitopes using fluorescent bis-urea and bis-imidazolium receptors

Early detection of cancer is essential for successful treatment and improvement in patient prognosis. Deregulation of post-translational modifications (PTMs) of proteins, especially phosphorylation, is present in many types of cancer. Therefore, the development of materials for the rapid sensing of low abundant phosphorylated peptides in biological samples can be of great therapeutic value. In this work, we have synthesised fluorescent molecularly imprinted polymers (fMIPs) for the detection of the phosphorylated tyrosine epitope of ZAP70, a cancer biomarker. The polymers were grafted as nanometer-thin shells from functionalised submicron-sized silica particles using a reversible addition-fragmentation chain-transfer (RAFT) polymerisation. Employing the combination of fluorescent urea and intrinsically cationic bis-imidazolium receptor cross-linkers, we have developed fluorescent sensory particles, showing an imprinting factor (IF) of 5.0. The imprinted polymer can successfully distinguish between phosphorylated and non-phosphorylated tripeptides, reaching lower micromolar sensitivity in organic solvents and specifically capture unprotected peptide complements in a neutral buffer. Additionally, we have shown the importance of assessing the influence of counterions present in the MIP system on the imprinting process and final material performance. The potential drawbacks of using epitopes with protective groups, which can co-imprint with targeted functionality, are also discussed.

Intermolecular interactions in clusters of ethylammonium nitrate and 1-amino-1,2,3-triazole

The intermolecular interaction energies, including hydrogen bonds (H-bonds), of clusters of the ionic liquid ethylammonium nitrate (EAN) and 1-amino-1,2,3-triazole (1-AT) based deep eutectic propellants (DeEP) are examined. 1-AT is introduced as a neutral hydrogen bond donor (HBD) to EAN in order to form a eutectic mixture. The effective fragment potential (EFP) is used to examine the bonding interactions in the DeEP clusters. The resolution of the Identity (RI) approximated second order Møller-Plesset perturbation theory (RI-MP2) and coupled cluster theory (RI-CCSD(T)) are used to validate the EFP results. The EFP method predicts that there are significant polarization and charge transfer effects in the EAN:1-AT complexes, along with Coulombic, dispersion and exchange repulsion interactions. The EFP interaction energies are in good agreement with the RI-MP2 and RI-CCSD(T) results. The quasi-atomic orbital (QUAO) bonding and kinetic bond order (KBO) analyses are additionally used to develop a conceptual and semi-quantitative understanding of the H-bonding interactions as a function of the size of the system. The QUAO and KBO analyses suggest that the H-bonds in the examined clusters follow the characteristic hydrogen bonding three-center four electron interactions. The strongest H-bonding interactions between the (EAN)1:(1-AT)n and (EAN)2:(1-AT)n (n = 1-5) complexes are observed internally within EAN; that is, between the ethylammonium cation [EA]+ and the nitrate anion ([NO3]-). The weakest H-bonding interactions occur between [NO3]- and 1-AT. Consequently, the average strengths of the H-bonds within a given (EAN)x:(1-AT)n complex decrease as more 1-AT molecules are introduced into the EAN monomer and EAN dimer. The QUAO bonding analysis suggests that 1-AT in (EAN)x:(1-AT)n can act as both a HBD and a hydrogen bond acceptor simultaneously. It is observed that two 1-AT molecules can form H-bonds to each other. Although the KBOs that correspond to H-bonding interactions in [EA]+:1-AT, [NO3]-:1-AT and between two 1-AT molecules are weaker than the H-bonds in EAN, those weak H-bond networks with 1-AT could be important to form a stable DeEP.

Light, Water, and Melatonin: The Synergistic Regulation of Phase Separation in Dementia

The swift rise in acceptance of molecular principles defining phase separation by a broad array of scientific disciplines is shadowed by increasing discoveries linking phase separation to pathological aggregations associated with numerous neurodegenerative disorders, including Alzheimer’s disease, that contribute to dementia. Phase separation is powered by multivalent macromolecular interactions. Importantly, the release of water molecules from protein hydration shells into bulk creates entropic gains that promote phase separation and the subsequent generation of insoluble cytotoxic aggregates that drive healthy brain cells into diseased states. Higher viscosity in interfacial waters and limited hydration in interiors of biomolecular condensates facilitate phase separation. Light, water, and melatonin constitute an ancient synergy that ensures adequate protein hydration to prevent aberrant phase separation. The 670 nm visible red wavelength found in sunlight and employed in photobiomodulation reduces interfacial and mitochondrial matrix viscosity to enhance ATP production via increasing ATP synthase motor efficiency. Melatonin is a potent antioxidant that lowers viscosity to increase ATP by scavenging excess reactive oxygen species and free radicals. Reduced viscosity by light and melatonin elevates the availability of free water molecules that allow melatonin to adopt favorable conformations that enhance intrinsic features, including binding interactions with adenosine that reinforces the adenosine moiety effect of ATP responsible for preventing water removal that causes hydrophobic collapse and aggregation in phase separation. Precise recalibration of interspecies melatonin dosages that account for differences in metabolic rates and bioavailability will ensure the efficacious reinstatement of the once-powerful ancient synergy between light, water, and melatonin in a modern world.

Molecularly imprinted miniature electrochemical biosensor for SARS-CoV-2 spike protein based on Au nanoparticles and reduced graphene oxide modified acupuncture needle

Accurate detection of SARS-CoV-2 spike (SARS-CoV-2-S) protein is of clinical significance for early diagnosis and timely treatment of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Herein, a surface molecularly imprinted miniature biosensor was fabricated. Au nanoparticles (AuNPs), reduced graphene oxide (rGO), poly(methylene blue)/poly(ionic liquids) and poly(ionic liquids) were successively electrodeposited onto the pinpoint of an acupuncture needle (AN). The molecularly imprinted miniature biosensor was obtained after the template of SARS-CoV-2-S protein was removed, which could be used for sensitive detection of SARS-CoV-2-S protein. The linear range and limit of detection (LOD) were 0.1 ∼ 1000 ng mL^-1 and 38 pg mL^-1, respectively, which were superior to other molecularly imprinted biosensors previously reported. The developed miniature biosensor also exhibited high specificity and stability. The reliability of the biosensor was evaluated by the detection of SARS-CoV-2-S protein in clinical serum samples.

Thermal and Electrochemical Properties of Ionic Liquids Bearing Allyl Group with Sulfonate-Based Anions-Application Potential in Epoxy Resin Curing Process

Sulfonate-based ionic liquids (ILs) with allyl-containing cations have been previously obtained by us, however, the present study aims to investigate the thermal, electrochemical and curing properties of these ILs. To determine the temperature range in which ionic liquid maintains a liquid state, thermal properties must be examined using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Melting, cold crystallization and glass transition temperatures are discussed, as well as decomposition temperatures for imidazolium- and pyridinium-based ionic liquids. The conductivity and electrochemical stability ranges were studied in order to investigate their potential applicability as electrolytes. Finally, the potential of triflate-based ILs as polymerization initiators for epoxy resins was proven.

Design of ionic liquids containing glucose and choline as drug carriers, finding the link between QM and MD studies

Designing drug delivery systems for therapeutic compounds whose receptors are located in the cytosol of cells is challenging as a bilayer cell membrane is negatively charged. The newly designed drug delivery systems should assist the mentioned drugs in passing the membrane barriers and achieving their targets. This study concentrated on developing novel ionic liquids (ILs) that interact effectively with cell membranes. These ILs are based on glucose-containing choline and are expected to be non-toxic. The binding energies of the known pharmaceutically active ionic liquids were calculated at the B3LYP/6-311++G(d,p) level in the gas phase and compared with those of our newly designed carbohydrate-based ionic liquids. Subsequently, we employed MD simulations to obtain information about the interactions of these known and designed ILs with the cell membrane. In our approach, we adopted QM and MD studies and illustrated that there could be a link between the QM and MD results.

Insights into Ionic Liquids: From Z-Bonds to Quasi-Liquids

Ionic liquids (ILs) hold great promise in the fields of green chemistry, environmental science, and sustainable technology due to their unique properties, such as a tailorable structure, the various types available, and their environmentally friendly features. On the basis of multiscale simulations and experimental characterizations, two unique features of ILs are as follows: (1) strong coupling interactions between the electrostatic forces and hydrogen bonds, namely in the Z-bond, and (2) the unique semiordered structure and properties of ultrathin films, specifically regarding the quasi-liquid. In accordance with the aforementioned theoretical findings, many cutting-edge applications have been proposed: for example, CO₂ capture and conversion, biomass conversion and utilization, and energy storage materials. Although substantial progress has been made recently in the field of ILs, considerable challenges remain in understanding the nature of and devising applications for ILs, especially in terms of e.g. in situ/real-time observation and highly precise multiscale simulations of the Z-bond and quasi-liquid. In this Perspective, we review recent developments and challenges for the IL research community and provide insights into the nature and function of ILs, which will facilitate future applications.

Thermal Kinetics of Monocationic and Dicationic Pyrrolidinium-Based Ionic Liquids

This work presents an in-depth kinetic thermal degradation comparison between traditional monocationic and the newly developed dicationic ionic liquid (IL), both coupled with a bromide (Br⁻) anion by using non-isothermal thermogravimetric analysis. Thermal analyses of 1-butyl-1-methylpyrrolidinium bromide [C₄MPyr][Br] and 1,4-bis(1-methylpyrrolidinium-1-yl)butane dibromide [BisC₄MPyr][Br₂] were conducted at a temperature range of 50–650 °C and subjected to various heating rates, which are 5, 10, 15, 20 and 25 °C/min. Thermogravimetric analysis revealed that dicationic IL, [BisC₄MPyr][Br₂] is less thermally stable compared to monocationic [C₄MPyr][Br]. A detailed analysis of kinetic parameters, which are the activation energy (E_a) and pre-exponential factor (log A), was calculated by using Kissinger-Akahira-Sunose (KAS), Flynn-Wall-Ozawa (FWO) and Starink. This study revealed that the average E_a and log A of [BisC₄MPyr][Br₂] are lower than [C₄MPyr][Br], which may be contributed to by its low thermal stability. Conclusively, it proved that the E_a and log A of ILs are strongly related to the thermal stability of ILs.

Molecular insights into the electrowetting behavior of aqueous ionic liquids

Molecular dynamics (MD) simulations were applied to investigate the wettability of aqueous hydrophilic and hydrophobic imidazolium-based ionic liquid (IL) nano-droplets on a graphite surface under a perpendicular electric field. Imminent transformation in the droplet configuration was observed at E = 0.08 V Å^-1 both for hydrophobic ILs 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTF₂] and SPC/E water droplets. However, for the hydrophilic IL, 1-ethyl-3-methylimidazolium tetrafluoroborate [EMIM][BF₄], the droplet was entirely elongated to column-shaped at E = 0.09 V Å^-1 for lower weight percentages of ILs and at E = 0.15 V Å^-1 for a higher weight percentage of ILs (i.e., 50 wt%). We explored the impact of the electric field through various parameters such as mass and charge density distribution across the droplet, contact angle of the droplet, orientation of water dipoles, and hydrogen bond analysis. The external electric field was found to influence the orientation of water dipoles and the accumulation of charge at various interfaces was observed with an increase in an electric field, which finally leads to shape deformation and depletion of ions from the liquid-vapor interface of the droplet. However, this behavior strongly depends on the hydrophilicity or hydrophobicity of the ILs and thus, is critically examined for both the ILs.

Influence of protic ionic liquids on hydration of glycine based peptides

The structure of water, especially around the solute is thought to play an important role in many biological and chemical processes. Water-peptide and cosolvent-peptide interactions are crucial in determining the structure and function of protein molecules. In this work, we present the H-bonding analysis for model peptides like glycyl-glycine (gly-gly), glycine-ւ-valine (gly-val), glycyl-ւ-leucine (gly-leu) and triglycine (trigly) and triethylammonium based carboxylate protic ionic liquids (PILs) in aqueous solutions as well as for peptides in ∼0.2 mol·L^-1 of aqueous PIL solutions in the spectral range of 7800-5500 cm^-1 using Fourier transform near-infrared (FT-NIR) spectroscopy at 298.15 K. The hydration numbers for peptides and PILs were obtained using NIR method of simultaneous estimation of hydration spectrum and hydration number of a solute dissolved in water. The H-bond of water molecules around peptides and PILs are found to be stronger and shorter than those in pure liquid water. We observe that the hydration shell around zwitterions is a clathrate-like cluster of water in which ions entrap. Watery network analysis confirms that singly H-bonded species or NHBs changes to partial or distorted ice-like structures of water in the hydration shell of PILs. The overall water H-bonding in the hydration sphere of PILs increases in the order TEAF < TEAA < TEAG < TEAPy ≈ TEAP < TEAB. The influence of PILs on hydration behavior of peptides is explored in terms of H-bonding, cooperativity, hydrophobicity, water structural changes, ionic interactions etc.

Alkylimidazolium Protic Ionic Liquids: Structural Features and Physicochemical Properties

We focus on a series of protic ionic liquids (PILs) with imidazolium and alkylimidazolium (1R3HIm, R = methyl, ethyl, propyl, and butyl) cations. Using the literature data and our experimental results on the thermal and transport properties, we analyze the effects of the anion nature and the alkyl radical length in the cation structure on the above properties. DFT calculations in gas and solvent phase have resulted in microscopic insights into the structure and cation-anion binding in these PILs. We show that the higher thermodynamic stability of an ion pair raises the PIL decomposition temperature. The melting points of the salts with the same cation decrease as the hydrocarbon radical in the cation becomes longer, which correlates with the weaker ion-ion interaction in the ion pairs. A comparative analysis of the protic ILs and corresponding ILs (1R3MeIm) with the same radical (R) in the cation structure and the same anion has been performed. The lower melting points of the ILs with 1R3MeIm cations are assumed to result from the weakening both of the ion-ion interaction and hydrogen bond.

Topological engineering of two-dimensional ionic liquid islands for high structural stability and CO2 adsorption selectivity

Ionic liquids (ILs) as green solvents and catalysts are highly attractive in the field of chemistry and chemical engineering. Their interfacial assembly structure and function are still far less well understood. Herein, we use coupling first-principles and molecular dynamics simulations to resolve the structure, properties, and function of ILs deposited on the graphite surface. Four different subunits driven by hydrogen bonds are identified first, and can assemble into close-packed and sparsely arranged annular 2D IL islands (2DIIs). Meanwhile, we found that the formation energy and HOMO–LUMO gap decrease exponentially as the island size increases via simulating a series of 2DIIs with different topological features. However, once the size is beyond the critical value, both the structural stability and electrical structure converge. Furthermore, the island edges are found to be dominant adsorption sites for CO₂ and better than other pure metal surfaces, showing an ultrahigh adsorption selectivity (up to 99.7%) for CO₂ compared with CH₄, CO, or N₂. Such quantitative structure–function relations of 2DIIs are meaningful for engineering ILs to efficiently promote their applications, such as the capture and conversion of CO₂.

Multi-scale simulations reveal the structure and properties of the two-dimensional ionic liquid islands supported by graphite, and the island edges show an ultrahigh adsorption selectivity for CO₂ compared with CH₄, CO, or N₂.

Exploring the Interactions of Ionic Liquids with Bio-Organic Amphiphiles Using Computational Approaches

Bio-organic amphiphiles have been shown to effectively impart unique physicochemical properties to ionic liquids resulting in the formation of versatile hybrid composites. In this work, we utilized computational methods to probe the formation and properties of hybrids prepared by mixing three newly designed bio-organic amphiphiles with 14 ionic liquids containing cholinium or glycine betaine cations and a variety of anions. The three amphiphiles were designed such that they contain unique biological moieties found in nature by conjugating (a) malic acid with the amino acid glutamine, (b) thiomalic acid with the antiviral, antibacterial pyrazole compound [3-(3,5-dimethyl-1H-pyrazol-1-yl)benzyl]amine, and (c) Fmoc-protected valine with diphenyl amine. Conductor-like screening model for real solvents (COSMO-RS) was used to obtain sigma profiles of the hybrid mixtures and to predict viscosities and mixing enthalpies of each composite. These results were used to determine optimal ionic liquid-bio-organic amphiphile mixtures. Molecular dynamics simulations of three optimal hybrids were then performed, and the interactions involved in the formation of the hybrids were analyzed. Our results indicated that cholinium-based ILs interacted most favorably with the amphiphiles through a variety of inter- and intramolecular interactions. This work serves to illustrate important factors that influence the interactions between bio-organic amphiphiles and bio-ILs and aids in the development of novel ionic liquid-based composites for a wide variety of potential biological applications.

Phosphonium ionic liquid-promoted Ce-doped nitrogen-rich TiO2for degradation gaseous pollutant under visible light irradiation

Altering physicochemical properties of TiO₂based on modifying the cation and anion structure of ionic liquids (ILs) is of great interests for environment. Up to date, the research involving IL-assisted synthesis of TiO₂was focused on imidazolium IL, and much less attention was devoted to IL with other structures. Hence, strategy for preparation of TiO₂in phosphonium IL is presented to control the growth of TiO₂nanocrystals. The as-prepared noble cerium-doped nitrogen-rich phosphonium IL-TiO₂photocatalyst with assisted by tributyl(propyl)phosphonium tetrafluoroborate exhibits a higher specific surface area and smaller crystallite size, which is conducive to the production of more and faster active substance, such as hydroxyl oxygen. When evaluated for photocatalysis of gaseous toluene under visible light irradiation, the sample manifests high degradation rate and efficiency, as well as excellent recycling performance due to the existence of superoxide radical produced by the Ce³⁺/Ce⁴⁺redox reaction. The introduction of phosphonium IL and Ce greatly enhanced charge separation efficiency and promoted production of active substances. Nitrogen also existed in the form of interstitial nitrogen and substituted nitrogen improves its response to visible light. This work shows promising application of phosphonium IL for highly enhanced TiO₂photocatalytic performance.

Recent advances in the organocatalytic applications of cyclopropene- and cyclopropenium-based small molecules

The development of novel small molecule-based catalysts for organic transformations has increased noticeably in the last two decades. A very recent addition to this particular research area is cyclopropene- and cyclopropenium-based catalysts. At one point in time, particularly in the mid-20^th century, much attention was focused on the structural aspects and physical properties of cyclopropene-based compounds. However, a paradigm shift was observed in the late 20^th century, and the focus shifted to the synthetic utility of these compounds. In fact, a wide range of cyclopropene derivatives have been found serving as valuable synthons for the construction of carbocycles, heterocycles and other useful organic compounds. In the last few years, the catalytic applications of cyclopropene/cyclopropenium-based compounds have been uncovered and many synthetic protocols have been developed using cyclopropene-based compounds as organocatalysts. Therefore, the main objective of this review is to highlight recent developments in the catalytic applications of cyclopropene-based small molecules in different areas of organocatalysis such as phase-transfer catalysis (PTC), Brønsted base catalysis, hydrogen-bond donor catalysis, nucleophilic carbene catalysis, and electrophotocatalysis developed within the past two decades.

Effect of the length and aromaticity of N3-substituent on adsorption performance of imidazolium-based poly(ionic liquids) towards Pd (II)

Imidazolium-based poly(ionic liquids) (PILs) have been deemed as attractive candidates in the field of precious metal adsorption. However, their further performance optimization is hampered by a lack of an inner understanding of the structure-adsorption performance relationship. In this research, electron and charge distributions of the imidazolium cations are tailored by changing the N3-substitute, and their adsorption performances for PdCl₄^2- were optimized accordingly. Furthermore, the adsorption mechanism is studied by synthesizing corresponding ionic liquid (IL) monomers and their Pd-adducts. Interestingly, longer N3 alkyl chains lead to more hydrogen bonds with PdCl₄^2-, which is beneficial for adsorption. Whereas, it is unfavorable for attracting anions due to a decrease in electrostatic potential (ESP) around cations caused by longer alkyl chains and aromatic substituents at N3 position. It is worth noting that the ESP around the cations plays a more important role in the adsorption process, which determines the adsorption performance of the imidazolium-based PILs. Thus, the performance optimization of imidazolium-based PILs should mainly focus on increasing the ESP of imidazolium cations in the future. This research highlights the potential of the cationic structure-adsorption performance relationship of PILs, which opens a new avenue to develop adsorbents for the metallurgical industry.

Ionic liquid facilitated melting of the metal-organic framework ZIF-8

Hybrid glasses from melt-quenched metal-organic frameworks (MOFs) have been emerging as a new class of materials, which combine the functional properties of crystalline MOFs with the processability of glasses. However, only a handful of the crystalline MOFs are meltable. Porosity and metal-linker interaction strength have both been identified as crucial parameters in the trade-off between thermal decomposition of the organic linker and, more desirably, melting. For example, the inability of the prototypical zeolitic imidazolate framework (ZIF) ZIF-8 to melt, is ascribed to the instability of the organic linker upon dissociation from the metal center. Here, we demonstrate that the incorporation of an ionic liquid (IL) into the porous interior of ZIF-8 provides a means to reduce its melting temperature to below its thermal decomposition temperature. Our structural studies show that the prevention of decomposition, and successful melting, is due to the IL interactions stabilizing the rapidly dissociating ZIF-8 linkers upon heating. This understanding may act as a general guide for extending the range of meltable MOF materials and, hence, the chemical and structural variety of MOF-derived glasses.

Mechanistic insight into the roles of anions and cations in the degradation of poly(ethylene terephthalate) catalyzed by ionic liquids

Ionic liquids (ILs) have shown high catalytic activity in the degradation of poly(ethylene terephthalate) (PET), but the effects of the anions and cations, as well as the mechanism, remain ambiguous. Glycolysis is an important recycling method that converts waste PET into monomers through various chemical reactions. To reveal the role of ILs and the molecular mechanism of the glycolysis of PET, density functional theory (DFT) calculations have been carried out for the possible pathways for the generation of bis(hydroxyethyl)terephthalate (BHET) catalyzed by isolated anions/cations and ion pairs at different sites. The pathway with the lowest barrier for the glycolysis of PET is the cleavage of the C-O ester bond, which generates the BHET monomer. The synergistic effects of the cations and anions play a critical role in the glycolysis of PET. The cations mainly attack the carbonyl oxygen of PET to catalyze the reaction, and the anions mainly form strong H-bonds with PET and ethylene glycol (EG). In terms of the mechanism, the H-bonds render the hydroxyl oxygen of EG more electronegative. The cation coordinates the carbonyl oxygen of the ester, and the hydroxyl oxygen of EG attacks the ester group carbon of PET, with proton transfer to the carbonyl oxygen. A four-membered-ring transition state would be formed by PET, EG, and the IL catalyst, which regularly accelerates the degradation of PET. These results provide fundamental help in understanding the roles of ILs and the mechanism of IL-catalyzed PET degradation.

Unveiling anion-induced folding in tripodal imidazolium receptors by ion-mobility mass spectrometry

The anion-induced folding of tripodal imidazolium receptors has been investigated by NMR spectroscopy, electrospray ionization ion mobility mass spectrometry and DFT calculations. Such folding can be switched by anion release upon collision induced dissociation.

Lipid-Based Ionic-Liquid-Mediated Nanodispersions as Biocompatible Carriers for the Enhanced Transdermal Delivery of a Peptide Drug

Lipid-based biocompatible ionic liquids (LBILs) have attracted attention as carriers in transdermal drug delivery systems (TDDSs) because of their lipophilic character. In this study, we report the formulation of a peptide-LBIL complex microencapsulated in an oil phase as a potential carrier for the transdermal delivery of leuprolide acetate as a model hydrophilic peptide. The peptide-LBIL complexes were prepared via a water-in-oil emulsion composed of 1,2-dimyristoyl-sn-glycerol-3-ethyl-phosphatidylcholine (EDMPC), a fatty acid (stearic, oleic, and linoleic acid)-based LBIL, and cyclohexane followed by freeze-drying to remove the water and cyclohexane. Then, the peptide-LBIL complexes were nanodispersed and stabilized in isopropyl myristate (IPM) using sorbitol laurate (Span-20). Ionic-liquid-in-oil nanodispersions (IL/O-NDs) were prepared with varying weight ratios of LBILs and Span-20 as the surfactant and the cosurfactant, respectively. Keeping the overall surfactant constant at 10 wt % in IPM, a 5:5 wt % ratio of surfactant (IL) and cosurfactant (Span-20) in the IL/O-NDs significantly (p < 0.0001) increased the physiochemical stability, drug-loading capacity, and drug encapsulation efficiency. The in vitro and in vivo peptide delivery across the skin was increased significantly (p < 0.0001) using IL/O-NDs, compared with non-IL-treated groups. Of all of the LBIL-based formulations, [EDMPC][Linoleate]/O-ND was considered the most preferable for a TDDS based on the pharmacokinetic parameters. The transdermal delivery flux with [EDMPC][Linoleate]/O-ND was increased 65-fold compared with the aqueous delivery vehicle. The IL/O-NDs were able to deform the lipid and protein arrangements of the skin layers to enhance the transdermal permeation of the peptide. In vitro and in vivo cytotoxicity studies of the IL/O-NDs revealed the biocompatibility of the LBIL-based formulations. These results indicated that IL/O-NDs are promising biocompatible carriers for lipid-peptide TDDSs.

Poly(ionic liquid)s Containing Alkoxy Chains and Bis(trifluoromethanesulfonyl)imide Anions as Highly Adhesive Materials

Adhesive materials have wide applications in diverse fields, but the development of a novel and multipurpose adhesive is a great challenge. This study demonstrates that conventional poly(ionic liquid)s (PILs) can be designed as highly efficient adhesives by simply introducing alkoxy moieties into the cationic backbone of PILs containing bis(trifluoromethanesulfonimide) (TFSI^- ) anions. The incorporated flexible alkoxy chain not only reduces the glass transition temperature of PILs but also endows these materials with strong hydrogen bonding interactions, which, together with the unique electrostatic interaction of the PILs, simultaneously contributes to a high cohesive energy and interfacial adhesive energy. Consequently, these alkoxy PILs are highly adhesive on various substrates such as glass, ceramic, stainless steel, aluminum, and polymers, in contrast to the nonadhesive behavior of conventional PILs. Photosensitive or electronically conductive composite adhesives are fabricated by virtue of the compatibility between ionic liquids and carbon nanotubes or silver nanofibers. Interestingly, the PIL-2-TFSI adhesive possesses a unique and reversible response to electric fields and achieves up to 35% improvement in adhesive strength.

The molecular behavior of pyridinium/imidazolium based ionic liquids and toluene binary systems

Imidazolium and pyridinium-based ionic liquids (ILs) have attracted increasing attention in the extraction of aromatic VOCs. However, fundamental studies on the mechanism of capturing aromatic VOCs have been less reported. In this work, the interactions between two ILs, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMIMTFSI) and N-butylpyridinium bis(trifluoromethylsulfonyl)imide (BpyTFSI), and toluene (C₆H₅CH₃), were investigated by using attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), excess infrared spectroscopy, hydrogen nuclear magnetic resonance (¹H NMR) spectroscopy and quantum chemical calculations. Some conclusions were obtained as follows: (1) H atoms on EMIMTFSI/BpyTFSI were located above or below the benzene ring and were mainly formed as C2-Hπ bonds and C2,6-Hπ bonds with C₆H₅CH₃, respectively. C-Hπ bonds played a significant role in capturing aromatic compounds. (2) Upon adding C₆H₅CH₃, the two IL-C₆H₅CH₃ system's interaction strength was as follows: EMIMTFSI-C₆H₅CH₃ > BpyTFSI-C₆H₅CH₃. (3) Since C₆H₅CH₃ was unable to disrupt the interactions between cations and anions of ion pairs in the two studied IL-C₆H₅CH₃ systems, only ion cluster-C₆H₅CH₃ and ion pair-C₆H₅CH₃ complexes were observed. This work may provide theoretical insights into the separation mechanism for capturing VOCs.

Evidence of the CH···O HydrogenBonding in Imidazolium-Based Ionic Liquids from Far-Infrared Spectroscopy Measurements and DFT Calculations

Knowledge of all the intermolecular forces occurring in ionic liquids (ILs) is essential to master their properties. Aiming at investigating the weaker hydrogen bonding in aprotic liquids, the present work combined computational study and far-infrared spectroscopy on four imidazolium-based ILs with different anions. The DFT calculations of the ionic couples, using the ωB97X-D functional and considering both the empirical dispersion corrections and the presence of a polar solvent, show that, for all samples, the lowest energy configurations of the ion pair present H atoms, directly bound to C atoms of the cation and close to O atoms of the anion, capable of creating moderate to weak hydrogen bonding with anions. For the liquids containing anions of higher bonding ability, the absorption curves generated from the calculated vibrational frequencies and intensities show absorption bands between 100 and 125 cm⁻¹ corresponding to the stretching of the hydrogen bond. These indications are in complete agreement with the presently reported temperature dependence of the far-infrared spectrum, where the stretching modes of the hydrogen bonding are detected only for samples presenting a moderate interaction and become particularly prominent at low temperatures. Moreover, from the analysis of the infrared spectra, the occurrence of various phase transitions as a function of temperature was detected, and the difference in the average energy between the H-bonded and the dispersion-governed molecular configurations was evaluated.