Luminescent films for chemo- and biosensing

Molecular design and architectonics towards film-based fluorescent sensing

The past few decades have witnessed encouraging progress in the development of high-performance film-based fluorescent sensors (FFSs) for detecting explosives, illicit drugs, chemical warfare agents (CWAs), and hazardous volatile organic chemicals (VOCs), among others. Several FFSs have transitioned from laboratory research to real-world applications, demonstrating their practical relevance. At the heart of FFS technology lies the sensing films, which play a crucial role in determining the analytes and the resulting signals. The selection of sensing fluorophores and the fabrication strategies employed in film construction are key factors that influence the fluorescence properties, active-layer structures, and overall sensing behaviors of these films. This review examines the progress and innovations in the research field of FFSs over the past two decades, focusing on advancements in fluorophore design and active-layer structural engineering. It underscores popular sensing fluorophore scaffolds and the dynamics of excited state processes. Additionally, it delves into six distinct categories of film fabrication technologies and strategies, providing insights into their advantages and limitations. This review further addresses important considerations such as photostability and substrate effects. Concluding with an overview of the field's challenges and prospects, it sheds light on the potential for further development in this burgeoning area.

Azoanthracene-core structure as Cu2+-assisted CO sensing probe: Characterization, performance, and bioimaging

Detection of endogenous CO (carbon monoxide) is an interesting topic in biology because it has been discovered as a messenger for signal transduction and therapeutic effects in vital biological activities. Fluorescence imaging has proven a powerful tool for detecting endogenous CO, which drives the development of low-cost and easy-to-use fluorescent probes. In this study, four azobenzene derivatives (A1, A2, A3, and A4) with various substituents were reported, including their geometric structures, photophysical parameters, and spectral responses to Cu2+ and CO. The relationship between substituent structure and performance was discussed along with Cu2+ quenching and CO sensing mechanisms. The optimal probe (A1), which had no substituent, efficiently quenched fluorescence in the presence of Cu2+, with its PLQY decreased from 0.33 to 0.02, PLQY = photoluminescence quantum yield. Upon CO deoxidization, A1's fluorescence could be recovered (PLQY recovered to 0.32) within 180 s. Its sensing mechanism was static by forming a non-fluorescent complex with Cu2+ (with a stoichiometric ratio of 1:1). The bioimaging performance of A1 for endogenous CO in HeLa cells was reported.

Design and Advanced Manufacturing of NU-1000 Metal-Organic Frameworks with Future Perspectives for Environmental and Renewable Energy Applications

Metal-organic frameworks (MOFs) represent a relatively new family of materials that attract lots of attention thanks to their unique features such as hierarchical porosity, active metal centers, versatility of linkers/metal nodes, and large surface area. Among the extended list of MOFs, Zr-based-MOFs demonstrate comparably superior chemical and thermal stabilities, making them ideal candidates for energy and environmental applications. As a Zr-MOF, NU-1000 is first synthesized at Northwestern University. A comprehensive review of various approaches to the synthesis of NU-1000 MOFs for obtaining unique surface properties (e.g., diverse surface morphologies, large surface area, and particular pore size distribution) and their applications in the catalysis (electro-, and photo-catalysis), CO2 reduction, batteries, hydrogen storage, gas storage/separation, and other environmental fields are presented. The review further outlines the current challenges in the development of NU-1000 MOFs and their derivatives in practical applications, revealing areas for future investigation.

Pt(II) Tetrafacial Barrel with Aggregation-Induced Emission for Sensing

A new tetraphenylpyrazine-based tetraimidazole ligand (L) was synthesized and used for subcomponent self-assembly with cis-(tmeda)Pd(NO3)2 and cis-Pt(PEt3)2(OTf)2, leading to the formation of two tetrafacial barrels [Pd8L4(tmeda)8](NO3)16 (1) and [Pt8L4(PEt3)16](OTf)16 (2), respectively. Although ligand L is aggregation-induced emission (AIE) active, barrel 2 showed a magnificently higher AIE activity than ligand L, while 1 failed to retain the AIE properties of the ligand. Pd(II) barrel 1, undergoing an aggregation-caused quenching (ACQ) phenomenon, nullified the AIE activity of the ligand to be used in the photophysical application. The enhanced emission in the aggregated state of Pt(II) barrel 2 was used for the recognition of picric acid (PA), which is explosive in nature and one of the groundwater contaminants in landmine areas. The recognition of picric acid was found to be selective in comparison with that of other nitroaromatic compounds (NACs), which could be attributed to ground-state complex formation and resonance energy transfer between picric acid and barrel 2. The use of new AIE-active assembly 2 for selective detection of PA with a low detection limit is noteworthy.

Advances in Bioelectrode Design for Developing Electrochemical Biosensors

The critical performance factors such as selectivity, sensitivity, operational and storage stability, and response time of electrochemical biosensors are governed mainly by the function of their key component, the bioelectrode. Suitable design and fabrication strategies of the bioelectrode interface are essential for realizing the requisite performance of the biosensors for their practical utility. A multifaceted attempt to achieve this goal is visible from the vast literature exploring effective strategies for preparing, immobilizing, and stabilizing biorecognition elements on the electrode surface and efficient transduction of biochemical signals into electrical ones (i.e., current, voltage, and impedance) through the bioelectrode interface with the aid of advanced materials and techniques. The commercial success of biosensors in modern society is also increasingly influenced by their size (and hence portability), multiplexing capability, and coupling in the interface of the wireless communication technology, which facilitates quick data transfer and linked decision-making processes in real-time in different areas such as healthcare, agriculture, food, and environmental applications. Therefore, fabrication of the bioelectrode involves careful selection and control of several parameters, including biorecognition elements, electrode materials, shape and size of the electrode, detection principles, and various fabrication strategies, including microscale and printing technologies. This review discusses recent trends in bioelectrode designs and fabrications for developing electrochemical biosensors. The discussions have been delineated into the types of biorecognition elements and their immobilization strategies, signal transduction approaches, commonly used advanced materials for electrode fabrication and techniques for fabricating the bioelectrodes, and device integration with modern electronic communication technology for developing electrochemical biosensors of commercial interest.

Electrospun nanofiber-based indicatorpaper sensing platform for fluorescence and visualization detection of norfloxacin

Norfloxacin (NOR) residues in water pose a serious threat to human health via the food chain, necessitating the development of a rapid on-site antibiotic detection technique. In this work, we utilize electrostatic spinning technology that combines polyacrylonitrile (PAN) fibers and adenosine triphosphate (ATP)-rare earth metal Tb3+ complexes (ATP/Tb) to construct a new ternary film-based sensor for sensitive, quick, and convenient field testing of NOR in water. The operating mechanism is that the ternary system produces gradually enhanced bright green fluorescence at increasing concentrations of NOR. The unique fluorescence property of the ternary systems is attributed to the use of ATP, rather than the commonly used adenosine monophosphate (AMP), to coordinate with Tb3+, which avoided the possible fluorescence quenching from competitive water binding. Benefiting from the PAN nanofiber's superior stability, acid, and alkali resistance, and flexibility as support, the ternary system exhibited a good linear response to NOR in a wide dynamic range of 0.04-30 μM at the detection limit of 16 nM. Additionally, the combination of a smartphone color recognition app allows for quick on-scene NOR detection. This film sensing strategy is instructive for the development of smart and portable sensing platforms for real-time detection of analytes such as antibiotics, pesticide residues, and hazardous materials in water bodies.

Recent advances in fluorescence-based chemosensing of organoarsenic feed additives using luminescence MOFs, COFs, HOFs, and QDs

Organoarsenics are low-toxicity compounds that are used widely as feed additives to promote livestock growth, enhance meat pigmentation, and fight against intestinal parasites. The organoarsenic compounds are commonly found in poultry waste and the degradation of organoarsenic produces the toxic carcinogen inorganic arsenic such as As(V) and As(III), which results in severe arsenic pollution of soil and groundwater. As a consequence, there exists a high necessity to develop suitable sensing methods for the trace detection and quantification of organoarsenic feed additives in wastewater. Among various detection methods, in particular, fluorescence-based sensing has become a popular and efficient method used extensively for sensing water contaminants and environmental contaminants. In the recent past, a wide variety of fluorescence chemosensors have been designed and employed for the efficient sensing and quantification of the concentration of organoarsenic feed additives in different environmental samples. This review article systematically highlights various fluorescence chemosensors reported to date for fluorescence-based sensing of organoarsenic feed additives. The fluorescence sensors discussed in this review are classified and grouped according to their structures and functions, and in each section, we provide a detailed report on the structure, photophysics, and fluorescence sensing properties of different chemosensors. Lastly, the future perspectives on the design and development of practically useful sensor systems for selective and discriminative sensing of organoarsenic compounds have been stated.

Probing surface properties of organic molecular layers by scanning tunneling microscopy

In view of the relevance of organic thin layers in many fields, the fundamentals, growth mechanisms, and dynamics of thin organic layers, in particular thiol-based self-assembled monolayers (SAMs) on Au(111) are systematically elaborated. From both theoretical and practical perspectives, dynamical and structural features of the SAMs are of great intrigue. Scanning tunneling microscopy (STM) is a remarkably powerful technique employed in the characterization of SAMs. Numerous research examples of investigation about the structural and dynamical properties of SAMs using STM, sometimes combined with other techniques, are listed in the review. Advanced options to enhance the time resolution of STM are discussed. Additionally, we elaborate on the extremely diverse dynamics of various SAMs, such as phase transitions and structural changes at the molecular level. In brief, the current review is expected to supply a better understanding and novel insights regarding the dynamical events happening in organic SAMs and how to characterize these processes.

Room-Temperature Self-Healing Glassy Luminescent Hybrid Film

The self-healing of glassy polymer materials on site has always been a huge challenge due to their frozen polymer network. We herein report self-repairable glassy luminescent film by assembling a lanthanide-containing polymer with randomly hyperbranched polymers possessing multiple hydrogen (H) bonds. Because of multiple H bonds, the hybrid film exhibits enhanced mechanical strength, with high glass transition temperature (T_g) of 40.3 °C and high storage modulus of 3.52 GPa, meanwhile, dynamic exchange of multiple H bonds enables its rapid room-temperature self-healing ability. This research provides new insights in preparing mechanical robust yet repairable polymeric functional materials.

Stimuli-Responsive Electrospun Fluorescent Fibers Augmented with Aggregation-Induced Emission (AIE) for Smart Applications

This review addresses the latest advancements in the integration of aggregation-induced emission (AIE) materials with polymer electrospinning, to accomplish fine-scale electrospun fibers with tunable photophysical and photochemical properties. Micro- and nanoscale fibers augmented with AIE dyes (termed AIEgens) are bespoke composite systems that can overcome the limitation posed by aggregation-caused quenching, a critical deficiency of conventional luminescent materials. This review comprises three parts. First, the reader is exposed to the basic concepts of AIE and the fundamental mechanisms underpinning the restriction of intermolecular motions. This is followed by an introduction to electrospinning techniques pertinent to AIE-based fibers, and the core parameters for controlling fiber architecture and resultant properties. Second, exemplars are drawn from latest research to demonstrate how electrospun nanofibers and porous films incorporating modified AIEgens (especially tetraphenylethylene and triphenylamine derivatives) can yield enhanced photostability, photothermal properties, photoefficiency (quantum yield), and improved device sensitivity. Advanced applications are drawn from several promising sectors, encompassing optoelectronics, drug delivery and biology, chemosensors and mechanochromic sensors, and innovative photothermal devices, among others. Finally, the outstanding challenges together with potential opportunities in the nascent field of electrospun AIE-active fibers are presented, for stimulating frontier research and explorations in this exciting field.

Double-Network Luminescent Films Constructed Using Sulfur Quantum Dots and Lanthanide Complexes

Although UV light-switchable luminescent films are of importance for application in soft optical devices and anticounterfeiting labels, there are still challenges in developing such films integrated with outstanding luminescent property, high self-healing efficiency, and simultaneously excellent mechanical strength. Herein, double-network (DN) luminescent films are designed and constructed via an intermolecular hydrogen bond crosslinking strategy of poly(ethylene glycol) (PEG) in sulfur quantum dots (S-QDs) and polyurethane (PU), where S-QDs ("stone" one) play dual roles of acting both as a soft segment to crosslink another segment PU ("bird" one) and also as the origin of a luminescence center ("bird" two) in films. In addition, lanthanide(III) complexes (LnCs, Ln═Eu³⁺, Tb³⁺) are employed as another emission source to embed in the films and switch the emission colors of DN films from the multicolor (red-yellow-green) of LnCs to the blue color of S-QDs by changing the ultraviolet excitation wavelength from 254 to 365 nm. It is worth noting that the crosslinking network strategy can effectively prevent S-QDs and LnCs from aggregating or leaking and enable both luminescence centers to homogeneously distribute, resulting in luminescent DN films possessing extraordinary UV light-switchable luminescence, improved mechanical property, and excellent self-healing ability. This work presents a viable method for the design and fabrication of luminescent films with multifunctional applications in flexible robotics, wearable devices, and dual-luminescent anticounterfeiting materials.

Water-Soluble Single-Benzene Chromophores: Excited State Dynamics and Fluorescence Detection

Two water-soluble single-benzene-based chromophores, 2,5-di(azetidine-1-yl)-tereph- thalic acid (DAPA) and its disodium carboxylate (DAP-Na), were conveniently obtained. Both chromophores preserved moderate quantum yields in a wide range of polar and protonic solvents. Spectroscopic studies demonstrated that DAPA exhibited red luminescence as well as large Stokes shift (>200 nm) in aqueous solutions. Femtosecond transient absorption spectra illustrated quadrupolar DAPA usually involved the formation of an intramolecular charge transfer state. Its Frank−Condon state could be rapidly relaxed to a slight symmetry-breaking state upon light excitation following the solvent relaxation, then the slight charge separation may occur and the charge localization became partially asymmetrical in polar environments. Density functional theory (DFT) calculation results were supported well with the experimental measurements. Unique pH-dependent fluorescent properties endows the two chromophores with rapid, highly selective, and sensitive responses to the amino acids in aqueous media. In detail, DAPA served as a fluorescence turn-on probe with a detection limit (DL) of 0.50 μM for Arg and with that of 0.41 μM for Lys. In contrast, DAP-Na featured bright green luminescence and showed fluorescence turn-off responses to Asp and Glu with the DLs of 0.12 μM and 0.16 μM, respectively. Meanwhile, these two simple-structure probes exhibited strong anti-interference ability towards other natural amino acids and realized visual identification of specific analytes. The present work helps to understand the photophysic−structure relationship of these kinds of compounds and render their fluorescent detection applications.

Electrospun chitosan/polyethylene oxide nanofibers mat loaded with copper (II) as a new sensor for colorimetric detection of tetracycline

Using electrospun chitosan/polyethylene oxide nanofibers mat (CS/PEO NFM) as carrier, Cu@CS/PEO NFM, a new tetracycline (TC) solid-state colorimetric sensor, were simply prepared by directly immobilizing Cu²⁺ on surface of CS/PEO NFM. After immersing in TC solutions, Cu@CS/PEO NFM can display visible color changes to the naked eye within 5.0 min, and the TC concentration-dependent color changes can also be quantitatively analyzed with a smartphone. Because Cu²⁺ can enhance the adsorption of CS/PEO NFM for TC, Cu@CS/PEO NFM possess a more sensitive response ability to TC, ensuring that the colorimetric sensing detection will not be interfered by other coexisting drugs. Due to the reversible combination of chitosan and Cu²⁺, the colorimetric sensing ability of Cu@CS/PEO NFM can be regenerated even after being reused at least 4 times. In addition, the naked eye detection limit of Cu@CS/PEO NFM-based colorimetric sensing is 65 μg kg^-1, which does not exceed the maximum residue limit in milk samples set by China (100 μg kg^-1). The obtained results fully indicated the practical application value of this method in preventing the hazard of TC residues.

Cyclodextrin-Confined Supramolecular Lanthanide Photoswitch

The utilization of azobenzene-based photoisomerization cannot only control the morphology of supramolecular assemblies, but can also regulate many biological processes. However, the design of azobenzene-involved nanoconstructs with switchable photoluminescence remains challenging because of the light-quenching ability of azobenzene. Herein, an azobenzene-derived multicomponent nanosystem is reported and its function as a supramolecular lanthanide photoswitch is explored. The metal chelation between lanthanide ions (Ln³⁺  = Eu³⁺ and Tb³⁺ ) and 2,6-pyridinedicarboxylic acid is utilized as the light-emitting center but its inherent fluorescence emission is completely suppressed via the disordered motion of the adjoining azophenyl unit. Interestingly, the hydrophobic cavity of α-cyclodextrin can provide a confined microenvironment to immobilize the molecular conformation of trans-azobenzene, thus leading to the recovery of characteristic lanthanide luminescence both in aqueous solution and the hydrogel state. Also, the luminescence can be reversibly turned off when the cis-azobenzene is expelled from the cavity of α-cyclodextrin upon alternating light irradiation. This mutual cooperation arising from host-guest complexation and metal-ligand coordination confers the desired photoswitchable luminescence abilities on the commonly used azobenzenes, which may hold great promise in the creation of more advanced light-responsive smart materials.

Fluorescence sensing of nitrophenol explosives using a two-dimensional organic-metal chalcogenide fully covered with functional groups

A new 2D fluorescent organic-metal chalcogenide (OMC), CdClHT (HT = 4-hydroxythiophenol), evenly covered with phenol groups is reported. CdClHT represents unparalleled selectivity and the highest sensitivity towards 2,4,6-trinitrophenol (TNP) (K_SV = 2.16 × 10⁷ m^-1, experimental LOD = 2 nM), among all reported 2D conjugated polymer (CP) luminescent detectors.

Self-Assembly of Amphiphilic BODIPY Derivatives on Micropatterned Ionic Liquid Surfaces for Fluorescent Films with Excellent Stability and Sensing Performance

Fluorescent films have been widely recognized as one of the most powerful tools for trace analyte detection. However, their use has been limited due to the poor photochemical stability of fluorophores at a gas-solid interface and inefficient film mass transfer. Herein, novel fluorescent films were developed through self-assembly of amphiphilic BODIPY derivatives on micropatterned ionic liquid surfaces. Unlike solid-state films, the obtained monolayer films exhibit excellent photochemical stability, similar to that of a solution. Moreover, the interfacial assembly of amphiphilic fluorophores can avoid gas diffusion inside the microdroplets, significantly improving the sensing performance. The 1/1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF₄) monolayer exhibits high sensitivity, high selectivity, and a fast response to detect diethylchlorophosphate (DCP) vapor. The detection limit was 226 ppt, with a response time to DCP of 2.0 s. Importantly, the 1/[BMIM]BF₄ monolayer can be reused for at least 50 cycles with no obvious signal fading. This study is expected to benefit the development of new strategies for designing fluorescence sensing films and lay a solid foundation for the fabrication of multifunctional sensing devices with excellent photochemical stability and sensing performance.

Energy Transfer in Metal-Organic Frameworks for Fluorescence Sensing

The development of materials with outstanding performance for sensitive and selective detection of multiple analytes is essential for the development of human health and society. Luminescent metal-organic frameworks (LMOFs) have controllable surface and pore sizes and excellent optical properties. Therefore, a variety of LMOF-based sensors with diverse detection functions can be easily designed and applied. Furthermore, the introduction of energy transfer (ET) into LMOFs (ET-LMOFs) could provide a richer design concept and a much more sensitive and accurate sensing performance. In this review, we focus on the recent five years of advances in ET-LMOF-based sensing materials, with an emphasis on photochemical and photophysical mechanisms. We discuss in detail possible energy transfer processes within a MOF structure or between MOFs and guest materials. Finally, the possible sensing applications of the ET-LMOF-based sensors are highlighted.

Synthesis of metal nanoclusters and their application in Hg2+ ions detection: A review

Mercuric (Hg²⁺) ions released from human activities, natural phenomena, and industrial sources are regarded as the global pollutant of world's water. Hg²⁺ ions contaminated water has several adverse effects on human health and the environment even at low concentrations. Therefore, rapid and cost-effective method is urgently required for the detection of Hg²⁺ ions in water. Although, the current analytical methods applied for the detection of Hg²⁺ ions provide low detection limit, they are time consuming, require expensive equipment, and are not suitable for in-situ analysis. Metal nanoclusters (MNCs) consisting of several to ten metal atoms are important transition missing between single atoms and plasmonic metal nanoparticles. In addition, sub-nanometer sized MNCs possess unique electronic structures and the subsequent unusual optical, physical, and chemical properties. Because of these novel properties, MNCs as a promising material have attracted considerable attention for the construction of selective and sensitive sensors to monitor water quality. Hence this review is focused on recent advances on synthesis strategies, and optical and chemical properties of various MNCs including their applications to develop optical assay for Hg²⁺ ions in aqueous solutions.

Polyelectrolyte/surfactant films: from 2D to 3D structural control

Reversible control of the 3D structure of polyelectrolyte/surfactant films at the air/water interface is showcased. A recently discovered mechanism is exploited to form highly efficient, stable and biocompatible films by...

A facile visualized solid-phase detection of virus-specific nucleic acid sequences through an upconversion activated linear luminescence recovery process

Based on the LRET between UCNPs and AuNPs, a solid-phase biosensor was developed for detection of virus-specific nucleic acid sequences by the naked eye, and is expected to become a fast, facile, efficient and reliable POCT platform.

18α-Glycyrrhetinic acid aggregation-induced emission probes for visual fluorescence detection of explosive as well multi-functional applications

Two novel compounds with good AIE properties were synthesized. As fluorescent probes, these compounds could effectively and quickly detect the explosive FOX-7.

Silver(I)-Carbene Bond-Directed Rigidification-Induced Emissive Metallacage for Picric Acid Detection

A new triphenylamine-based tetraimidazolium salt L was developed for silver(I)-carbene bond-directed synthesis of tetranuclear silver(I) octacarbene ([Ag₄(L)₂](PF₆)₄) metallacage 1. Interestingly, after assembly formation, metallacage 1 showed a nine-fold emission enhancement in dilute solution while ligand L was weakly fluorescent. This is attributed to the rigidity induced to the system by metal-carbene bond formation where the metal center acts as a rigidification unit. The enhanced emission intensity in dilute solution and the presence of the triphenylamine core made 1 a potential candidate for recognition of picric acid (PA). This recognition can be ascribed to the dual effect of ground-state charge-transfer complex formation and resonance energy transfer between the picrate and metallacage 1. For metallacage 1, a considerable detection limit toward PA was observed. The use of such metal-carbene bond-directed rigidification-induced enhanced emission for PA sensing is noteworthy.

Comparison Between Binuclear and Mononuclear Ru(II) Complexes: Synthesis, Structure, Photophysics, and Oxygen Sensing Performance

Owing to their attractive potential in optoelectronic application, luminescent Ru(II) complexes with diamine ligands are harvesting more and more research efforts. These literature efforts, however, are mostly mononuclear ones, with no detailed discussion on the performance comparison between mononuclear and multinuclear Ru(II) complexes. This work synthesized three diamine ligands having two or multiple chelating sites in each ligand, as well as their Ru(II) complexes. The single-crystal structure, electronic structure, and photophysical parameters of these Ru(II) complexes were analyzed and compared. It was found that multinuclear Ru(II) complexes had a pure MLCT (metal-to-ligand charge transfer)–based emissive center, showing longer emission lifetime and higher emission quantum yield, which were desired for oxygen sensing. Then, the oxygen sensing performance of these mononuclear and multinuclear Ru(II) complexes was systematically compared by doping them into polymer fibers via electrospinning method. Improved oxygen sensing performance was observed from binuclear Ru(II)-doped nanofibrous samples, compared with the sensing performance of mononuclear ones, including higher sensitivity, shorter response/recovery time, and better photostability. The causation was attributed to the fact that the emissive state of multinuclear Ru(II) complexes was MLCT-based ones and thus more sensitive to O₂ quenching than monocular Ru(II) complexes whose emissive state was a mixture of MLCT and LLCT (ligand-to-ligand charge transfer). In addition, a multinuclear Ru(II) complex had multiple emissive/sensing components, so that its sensing collision probability with O₂ was increased, showing better photostability and shorter response/recovery time. The novelty of this work was the linear oxygen sensing curve, which was rarely reported in the previous work.

Regenerative Flexible Upconversion-Luminescence Biosensor for Visual Detection of Diethylstilbestrol Based on Smartphone Imaging

Diethylstilbestrol (DES), an endocrine disrupting chemical, has been linked to serious health problems in humans. In this work, a regenerative flexible upconversion-fluorescence biosensor was designed for the detection of DES in foodstuffs and environmental samples. Herein, amino-functionalized upconversion nanoparticles (UCNPs) were synthesized and immobilized on the surface of a flexible polydimethylsiloxane substrate, which was further modified with complementary DNA and dabcyl-labeled DES aptamer. The fluorescence resonance energy transfer (FRET) system was established for DES detection between dabcyl and UCNPs as the acceptor and donor pairs, respectively, which resulted in the quenching of the upconversion luminescence intensity. In the presence of a target, the FRET system was destroyed and upconversion fluorescence was restored due to the stronger affinity of the aptamer toward DES. The designed biosensor was also implemented in a dual-mode signal readout based on images from a smartphone and spectra from a spectrometer. Under the optimized experimental conditions, good linear relationships were achieved based on imaging (y = 53.055x + 36.175, R² = 0.9851) and spectral data (y = 1.1582x + 1.9561, R² = 0.9897). The designed biosensor revealed great practicability with a spiked recovery rate of 77.91-97.95% for DES detection in real environment and foodstuff samples. Furthermore, the proposed biosensor was regenerated seven times with an accuracy threshold of 80% demonstrating its durability and reusability. Thus, this biosensor is expected to be applied to point-of-care and on-site detection based on the developed portable smartphone device and android application.

Film Nanoarchitectonics of Pillar[5]arene for High-Performance Fluorescent Sensing: a Proof-of-Concept Study

Substrates play crucial roles for the sensing performances of fluorescent films owing to their effect on the formation of a fluorescent adlayer. However, no such film has been developed through synthesizing a substrate with a defined structure. We herein report a kind of self-standing, uniform, and thickness tunable pillar[5]arene-based nanofilms to serve as substrates for fabricating fluorescent sensing films. In comparison with a glass plate, the pillar[5]arene-based nanofilms can ensure spatial and electronic isolation of immobilized fluorophores and circumvent aggregation-caused quenching in a film state. For conceptual proof, a formic acid fluorescent sensing film was developed through simple loading of a fluorophore, a 4-azetidine-1,8-naphthalimide derivative of cholesterol (NA-Ch), onto the prepared nanofilm. Sensing performance studies demonstrated that the fluorescent film showed a sensitive, fast, and highly selective response to formic acid in air with a detection limit of lower than 2.8 mg m^-3 and a response time of less than 3 s. Moreover, the sensing is fully reversible and highly repeatable. Further studies showed that the film sensor can be used for fast determination of methanol acidity via vapor sampling. Clearly, innovation of substrates with defined structures can be taken as an effective and efficient way to develop new sensing films via combination with known fluorophores.

On bio-MOF materials doped with phosphorescent iridium complexes for molecular oxygen determination: Synthesis, characterization and performance

In this paper, two phosphorescent Ir(III) complexes, Ir(ppy)₂(Ln), were synthesized using 2-phenyl pyridine (ppy) as the first (major) ligand and two phosphorous compounds (L1 and L2) as the auxiliary ligand. Their single crystal structure and electronic structure were discussed. Ir(ppy)₂(Ln) complexes were doped into a supporting matrix of bio-MOF-1 via cationic exchange to ensure their uniform distribution. Their successful doping was confirmed by SEM, fluorescence microscopy image, XRD, N₂ adsorption/desorption and ICP measurement. Their photophysical parameters, including absorption spectra, excitation spectra, emission spectra, emission lifetime and quantum yield, were discussed in detail. Their phosphorescent emission was confirmed by density functional theory and emission lifetime, making them applicable for oxygen sensing. Linear working curves were observed for both composite samples, showing sensitivity as high as 23.65 with response/recovery time of 9/22 s. Humidity effect on sensing performance was limited. These parameters were found superior to literature ones based on phosphorescent Cu(I), RE(III), Ru(II) and Re(I) complexes. The sensing mechanism was revealed as a dynamic collision between Ir(ppy)₂(Ln) and O₂ molecules. The novelty of this work was the combination of phosphorescent Ir(III) complexes with porous bio-MOF-1, resulting in greatly improved sensitivity and linear sensing with short response time.

Flexible electrospun nanofibrous film integrated with fluorescent carbon dots for smartphone-based detection and cellular imaging application

The dose of administered chemotherapy drugs is crucial to determine due to the potential for efficient or adverse outcomes for cancer patients. To date, no user-friendly and low-cost method of doxorubicin (DOX) detection using nontoxic and biodegradable materials has been reported. For this reason, in this work, we have developed for the first time a nanofiber-based sensing platform for sensitive and on-site DOX assay in just 10 min. This is obtained thanks to printable, porosity and embeddability features of electrospun nanofibrous films (ENFFs) combined with nitrogen and sulfur co-doped carbon dots (NS-CDs) as sensing probes. The assay was done by just pipetting analyte on the hydrophilic spots of the fabricated photoluminescence water-stable ENFFs where the color intensity was being darkened. DOX quenched NS-CDs fluorescence onto ENFFs through inner filter effect. The developed sensor was either coupled with smartphone technology to provide miniaturized, portable and easy-to-use device or an ordinary spectrofluorimeter for solid-state sensing applications (detection limit of 5.4 nM). Moreover, applicability of the designed sensor was evaluated in human serum with satisfactory recoveries. It is more interesting that the fabricated NS-CDs/ENF scaffolds have a high potential to detect the intracellular DOX to enhance cell proliferation leading to be considered as a multimodal tool in biomedical research and clinical diagnostics.

A "turn-off" fluorescent sensor based on electrospun polycaprolactone nanofibers and fluorene(bisthiophene) derivative for nitroaromatic explosive detection

The preparation of fluorene(bisthiophene)-based fluorescent nanofibers for nitroaromatic explosive detection provides a convenient rapid and low-cost strategy aiming at forensic applications. Polycaprolactone (PCL) and fluorene(bisthiophene) derivative (FBT) nanofibers were obtained by electrospinning technique as a free-standing mat and characterized by SEM, FTIR, thermal analysis and fluorescence spectroscopy. The PCL/FBT nanofibers presented high sensitivity towards 2,4,6-trinitrotoluene (TNT) and picric acid (PA), with fluorescence quenching (turn-off mechanism), and selectivity to another kind of explosives. The free-standing mats were used as a cloth strip that was swiped on surfaces contaminated with TNT traces allowing its visual detection under UV light source. These findings are particularly important for the development of a facile and promising strategy to assembly portable optical devices for nitroaromatic explosive detection.

Luminescent lanthanide-macrocycle supramolecular assembly

A series of macrocyclic compounds, including crown ether, cyclodextrin, cucurbituril and pillararene, bound to various specific organic/inorganic/biological guest molecules and ions through various non-covalent interactions, can not only make a single system multifunctional but also endow the system with intelligence, especially for luminescent materials. Due to their excellent luminescence properties, such as long-lived excited states, sharp linear emission bands and large Stokes shift, lanthanides have shown great advantages in luminescence, and have been more and more applied in the design of advanced functional luminescent materials. Based on reported research, we summarize the progress of lanthanide luminescent materials based on different macrocyclic compounds from ion or molecule recognition to functional nano-supramolecular assembly of the lanthanide-macrocycle supramolecular system including photo-reaction mediated switch of lanthanide luminescent molecules, multicolor luminescence, ion detection and cell imaging of rare-earth up-conversion of macrocyclic supramolecular assembly. Finally, we put forward the prospects of future development of lanthanide luminescent macrocyclic supramolecular materials.

Five-coordinate iridium(III) complex with ΔΛ chirality

The coordinatively unsaturated bis-chelated iridium(III) complex, [Ir(2-Bubzq)₂Cl] (2-BubzqH = 2-butyl-benzo[h]quinoline), denoted as complex 1, was obtained by reacting iridium(III) trichloride with 2-BubzqH in a 1 : 2 molar ratio. The results were in contrast to the common view that a chlorine-bridged dimer, [Ir(L)₂Cl]₂ (L = bis-chelate ligand), is formed under the corresponding conditions. A single-crystal X-ray diffraction structural analysis revealed that complex 1 has a five-coordinate geometry with a distorted square pyramidal configuration. The optical resolution of complex 1 was measured chromatographically on a chiral column, yielding Δ and Λ as enantiomers. The resolved enantiomers were stable enough against racemization in CDCl₃ as confirmed by the vibrational circular dichroism measurements. Complex 1 reacted with carbon monoxide (CO) to give [Ir(2-Bubzq)₂(CO)Cl] and with 1,10-phenanthroline (phen) to give [Ir(2-Bubzq)₂(phen)]Cl within a minute with its absolute configuration (ΔΛ chirality) maintained.

Two Luminescent Iridium Complexes with Phosphorous Ligands and Their Photophysical Comparison in Solution, Solid and Electrospun Fibers: Decreased Aggregation-Caused Emission Quenching by Steric Hindrance

In this paper, we prepared two phosphorescent Ir complexes with ligands of 2-phenyl pyridine (ppy), and two phosphorous ligands with large steric hindrance, hoping to allow enough time for the transformation of the highly phosphorescent ³MLLCT (metal-to-ligand-ligand-charge-transfer) excited state. Their large steric hindrance minimized the π-π interaction between complex molecules, so that the aggregation-induced phosphorescence emission (AIPE) influence could be minimized. Their single crystals indicated that they took a distorted octahedral coordination mode. Photophysical comparison between these Ir complexes in solution, in the solid state and in electrospun fibers was performed to confirm the realization of limited aggregation-caused quenching (ACQ). The potential surface crossing and energy transfer from ³ML_BPECT/³ML_BPEL_ppyCT to ³ML_ppyCT in these Ir complexes were revealed by density functional theory calculation and temperature-dependent emission. It was confirmed that these two phosphorous ligands offered large steric hindrance, which decreased the ACQ effect, allowing the efficient emissive decay of the ³ML_ppyCT excited state. This is one of the several luminescent Ir complexes with a high emission yield (Φ = 0.27) and long emission lifetime (0.43 μs) in the solid state.

Design and Synthesis of AIE-Based Small-Molecule and Nanofibrous Film for Fluorescent Sensing Application

Fluorescent sensors that respond to environmental conditions (temperature, pressure, and pH) have attracted widespread attention in recent years. Generally, traditional solid-state fluorescent materials tend to suffer from aggregation-induced quenching (ACQ) and difficulty of film forming, limiting their extensive applications. Therefore, researchers are focusing more and more attention on fluorescent sensors with aggregation-induced emission (AIE) effects. Herein, the article reports an AIE molecule (TPEBZMZ) containing tetraphenylethylene (TPE) and benzimidazole fragments. The fluorescence properties of TPEBZMZ in solution and aggregation states have been investigated, and the luminescence performance and aggregation structures of solid-state TPEBZMZ after force and acid treatments have been explored. The results show obvious AIE and fluorescent sensing properties of TPEBZMZ, presenting force- and acid-induced discolorations. Moreover, the TPEBZMZ-based fluorescent nanofibrous film is fabricated by electrospinning the solution of TPEBZMZ blended with polylactic acid (PLA), which shows a good nanofiber film structure and exhibits reversible acid-induced discoloration property, even with only 0.5 wt% TPEBZMZ. This work provides a simple strategy to achieve stimulus-responsive fluorescent film.

Construction of DCM-based NIR fluorescent probe for visualization detection of H2S in solution and nanofibrous film

Hydrogen sulfide (H₂S) played crucial roles in biological processes and daily life, and the abnormal level of H₂S was associated with many physiological processes. In this paper, we designed and developed a dicyanomethylene-4H-chromene (DCM)-based near-infrared (NIR) fluorescent probe DCM-NO guided by theoretical calculation. The probe displayed excellent selectivity towards H₂S with a fast response time (3 min) and low detection limit (fluorescence 25.3 nM/absorption 6.61 nM) in Hela cells and real water samples. Furthermore, the probe-doped solid sensing materials (test strips and nanofibrous films) exhibited specific visualization of H₂S under ambient light or hand-held UV lamp, providing great potential for on-site and real-time application in environmental and biological systems.

Review on application of perylene diimide (PDI)-based materials in environment: Pollutant detection and degradation

Environment pollution is getting serious and various poisonous contaminants with chemical durability, biotoxicity and bioaccumulation have been widespreadly discovered in municipal wastewaters and surface water. The detection and removal of pollutants show great significance for the protection of human health and other organisms. Due to its distinctive physical and chemical properties, perylene diimide (PDI) has received widespread attention from different research fields, especially in the area of environment. In this review, a comprehensive summary of the development of PDI-based materials in fluorescence detection and advanced oxidation technology for environment was introduced. Firstly, we chiefly presented the recent progress about the synthesis of PDI and PDI-based nanomaterials. Then, their application in fluorescence detection for environment was presented and categorized, principally including the detection of heavy metal ions, harmful anions and organic contaminants in the environment. In addition, the application of PDI and PDI-based materials in different advanced oxidation technologies for environment, such as photocatalysis, photoelectrocatalysis, Fenton and Fenton-like reaction and persulfate activation, was also summarized. At last, the challenges and future prospects of PDI-based materials in environmental applications were discussed. This review focuses on presenting the practical applications of PDI and PDI-based materials as fluorescent probes or catalysts (especially photocatalysts) in the detection of hazardous substances or catalytic elimination of organic contaminants. The contents are aimed at supplying the researchers with a deeper understanding of PDI and PDI-based materials and encouraging their further development in environmental applications.

Ultrabright Fluorescent Polymeric Nanofibers and Coatings Based on Ionic Dye Insulation with Bulky Counterions

Preparation of bright fluorescent materials based on polymers is hampered by a fundamental problem of aggregation-caused quenching (ACQ) of encapsulated dyes. Here, ultrabright fluorescent polymeric nanofibers and coatings are prepared based on a concept of ionic dye insulation with bulky hydrophobic counterions that overcomes the ACQ problem. It is found that bulky hydrophobic counterion perfluorinated tetraphenylborate can boost >100-fold the fluorescence quantum yields of cationic dye octadecyl rhodamine B at high loading (30 wt %) in biocompatible poly(methyl methacrylate) (PMMA). The concept is applicable to both rhodamine and cyanine dyes, which results in bright fluorescent polymeric materials of four different colors spanning from blue to near-infrared. It allows for preparation of electrospun polymeric nanofibers with >50-fold higher dye loading by mass (30 wt %, >20-fold higher molarity for rhodamine dyes) while preserving good fluorescence quantum yields (31%), which implies drastic improvement in their fluorescence brightness. The counterion-based polymeric materials are also validated as coatings of model medical devices, such as stainless steel fiducials and 3D-printed stents of complex geometry. Spin-coated fluorescent polymeric films loaded with a dye paired with bulky counterions exhibit excellent biocompatibility and low toxicity. Moreover, counterion-modified materials show much better stability against dye leakage in the presence of living cells and a serum-containing medium, compared to materials based on the dye with a small inorganic anion. Overall, by pushing the barriers of ACQ, our counterion approach emerges as a powerful tool to develop ultrabright fluorescent polymeric materials ranging from nano- and macroscale.

Effects of geometrical isomerism on emissive behaviour of heteroleptic cyclometalated Ir(III) complexes

In this study, we report the emissive properties of a heteroleptic cyclometalated Ir(iii) complex, [Ir(bzq)2(PBO)] (bzqH = benzo[h]quinoline; PBOH = 2-(2-hydroxyphenyl)benzoxazole). The complex, [Ir(C^N)2(N^O)], was synthesised and optically resolved using a chiral column. Two geometrical isomers, trans-(N,N) and cis-(N,N) isomers, were obtained as the major and minor products in an enantiopure form, respectively. Their molecular structures were determined using single crystal X-ray analysis. In the crystalline states, the intermolecular C-Hπ interaction between PBO- and an H atom in bzq- was the main factor influencing molecular packing. When the complexes were dissolved in CH2Cl2 and excited at 430 nm under N2 atmosphere, yellow (λmax = 550 nm) and orange emissions (λmax = 570 nm) were observed for the trans-(N,N) and cis-(N,N) isomers, respectively, with the quantum yield higher for the former than the latter.

Visual Quantitative Detection of Glutathione and Cholesterol in Human Blood Based on the Thiol-Ene Click Reaction-Triggered Wettability Change of the Interface

Herein, we proposed an innovative visual quantitative sensing strategy based on thiol-ene click chemistry and the capillary action principle. A triethoxyvinylsilane (VTEO)- or mercaptopropylsilatrane (MPS)-modified interface was prepared for analyte recognition. Target analyte molecules containing thiol groups or C═C double bonds are coupled to the VTEO- or MPS-modified inner surface of the glass capillary tube via a thiol-ene click reaction, respectively. Then, the molecular recognition events were transformed into the wettability change of the inner wall of the glass capillary. The concentration of the target molecules was quantified by reading the height change of the water column in the capillary tube. As a proof of concept, this strategy was successfully used to build visual quantitative sensors for detecting glutathione and cholesterol. In addition, this strategy showed a good anti-interference ability to complex biological fluids and realized sensitive glutathione (GSH) and cholesterol detection in real human blood samples.

Tetraphenylethylene-vitamin E Conjugates as sensitive aggregation-induced emission probes for selective detection of explosive FOX-7

With the increasingly severe international security situation, the application of explosives is more and more extensive, and the probes that can detect the explosives quickly and efficiently have attracted people's attention. In this work, two novel probes T₁ and T₂ were synthesized through vitamin E succinate and tetraphenylethylene derivative. Fluorescence spectra showed that both T₁ and T₂ had a typical aggregation-induced emission (AIE) effect in THF/H₂O solution, and explosive FOX-7 could effectively quench this fluorescence without being affected by other explosives or ions. The filter paper and cotton rods prepared with these two probes could detect FOX-7 specifically, which also provided the possibility for practical application on the battlefield.

The Role of Porphyrinoid Photosensitizers for Skin Wound Healing

Microorganisms, usually bacteria and fungi, grow and spread in skin wounds, causing infections. These infections trigger the immune system and cause inflammation and tissue damage within the skin or wound, slowing down the healing process. The use of photodynamic therapy (PDT) to eradicate microorganisms has been regarded as a promising alternative to anti-infective therapies, such as those based on antibiotics, and more recently, is being considered for skin wound-healing, namely for infected wounds. Among the several molecules exploited as photosensitizers (PS), porphyrinoids exhibit suitable features for achieving those goals efficiently. The capability that these macrocycles display to generate reactive oxygen species (ROS) gives a significant contribution to the regenerative process. ROS are responsible for avoiding the development of infections by inactivating microorganisms such as bacteria but also by promoting cell proliferation through the activation of stem cells which regulates inflammatory factors and collagen remodeling. The PS can act solo or combined with several materials, such as polymers, hydrogels, nanotubes, or metal-organic frameworks (MOF), keeping both the microbial photoinactivation and healing/regenerative processes' effectiveness. This review highlights the developments on the combination of PDT approach and skin wound healing using natural and synthetic porphyrinoids, such as porphyrins, chlorins and phthalocyanines, as PS, as well as the prodrug 5-aminolevulinic acid (5-ALA), the natural precursor of protoporphyrin-IX (PP-IX).