Iron-Based Metal-Organic Frameworks as Multiple Cascade Synergistic Therapeutic Effect Nano-Drug Delivery Systems for Effective Tumor Elimination

Efforts have been made to improve the therapeutic efficiency of tumor treatments, and metal-organic frameworks (MOFs) have shown excellent potential in tumor therapy. Monotherapy for the treatment of tumors has limited effects due to the limitation of response conditions and inevitable multidrug resistance, which seriously affect the clinical therapeutic effect. In this study, we chose to construct a multiple cascade synergistic tumor drug delivery system MIL-101(Fe)-DOX-TCPP-MnO2@PDA-Ag (MDTM@P-Ag) using MOFs as drug carriers. Under near-infrared (NIR) laser irradiation, 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (TCPP) and Ag NPs loaded on MDTM@P-Ag can be activated to generate cytotoxic reactive oxygen species (ROS) and achieve photothermal conversion, thus effectively inducing the apoptosis of tumor cells and achieving a combined photodynamic/photothermal therapy. Once released at the tumor site, manganese dioxide (MnO2) can catalyze the decomposition of hydrogen peroxide (H2O2) in the acidic microenvironment of the tumor to generate oxygen (O2) and alleviate the hypoxic environment of the tumor. Fe3+/Mn2+ will mediate a Fenton/Fenton-like reaction to generate cytotoxic hydroxyl radicals (·OH), while depleting the high concentration of glutathione (GSH) in the tumor, thus enhancing the chemodynamic therapeutic effect. The successful preparation of the tumor drug delivery system and its good synergistic chemodynamic/photodynamic/photothermal therapeutic effect in tumor treatment can be demonstrated by the experimental results of material characterization, performance testing and in vitro experiments.

Biological Oxidation of Manganese Mediated by the Fungus Neoroussoella solani MnF107

Manganese oxides are highly reactive minerals and influence the geochemical cycling of carbon, nutrients, and numerous metals in natural environments. Natural Mn oxides are believed to be dominantly formed by biotic processes. A marine Mn-oxidizing fungus Neoroussoella solani MnF107 was isolated and characterized in this study. SEM observations show that the Mn oxides are formed on the fungal hyphal surfaces and parts of the hypha are enveloped by Mn oxides. TEM observations show that the Mn oxides have a filamentous morphology and are formed in a matrix of EPS enveloping the fungal cell wall. Mineral phase analysis of the fungal Mn oxides by XRD indicates that it is poorly crystalline. Chemical oxidation state analysis of the fungal Mn oxides confirms that it is predominantly composed of Mn(IV), indicating that Mn(II) has been oxidized to Mn (IV) by the fungus.

Orange G degradation by heterogeneous peroxymonosulfate activation based on magnetic MnFe2O4/α-MnO2 hybrid

Wastewater containing an azo dye Orange G (OG) causes massive environmental pollution, thus it is critical to develop a highly effective, environmental-friendly, and reusable catalyst in peroxymonosulfate (PMS) activation for OG degradation. In this work, we successfully applied a magnetic MnFe₂O₄/α-MnO₂ hybrid fabricated by a simple hydrothermal method for OG removal in water. The characteristics of the hybrid were investigated by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller method, vibrating sample magnetometry, electron paramagnetic resonance, thermogravimetric analysis, and X-ray photoelectron spectroscopy. The effects of operational parameters (i.e., catalytic system, catalytic dose, solution pH, and temperature) were investigated. The results exhibited that 96.8% of OG degradation was obtained with MnFe₂O₄/α-MnO₂(1:9)/PMS system in 30 min regardless of solution pH changes. Furthermore, the possible reaction mechanism of the coupling system was proposed, and the degradation intermediates of OG were identified by mass spectroscopy. The radical quenching experiments and EPR tests demonstrated that SO₄^•̶, O₂^•̶, and ¹O₂ were the primary reactive oxygen species responsible for the OG degradation. The hybrid also displayed unusual stability with less than 30% loss in the OG removal after four sequential cycles. Overall, magnetic MnFe₂O₄/α-MnO₂ hybrid could be used as a high potential activator of PMS to remove orange G and maybe other dyes from wastewater.

Synthesis and Aerobic Oxidation Catalysis of Mesoporous Todorokite-Type Manganese Oxide Nanoparticles by Crystallization of Precursors

The pursuit of a high surface area while maintaining high catalytic performance remains a challenge due to a trade-off relationship between these two features in some cases. In this study, mesoporous todorokite-type manganese oxide (OMS-1) nanoparticles with high specific surface areas were synthesized in one step by a new synthesis approach involving crystallization (i.e., solid-state transformation) of a precursor produced by a redox reaction between MnO₄^- and Mn²⁺ reagents. The use of a low-crystallinity precursor with small particles is essential to achieve this solid-state transformation into OMS-1 nanoparticles. The specific surface area reached up to ca. 250 m² g^-1, which is much larger than those (13-185 m² g^-1) for Mg-OMS-1 synthesized by previously reported methods including multistep synthesis or dissolution/precipitation processes. Despite ultrasmall nanoparticles, a linear correlation between the catalytic reaction rates of OMS-1 and the surface areas was observed without a trade-off relationship between particle size and catalytic performance. These OMS-1 nanoparticles exhibited the highest catalytic activity among the Mn-based catalysts tested for the oxidation of benzyl alcohol and thioanisole with molecular oxygen (O₂) as the sole oxidant, including highly active β-MnO₂ nanoparticles. The present OMS-1 nanomaterial could also act as a recyclable heterogeneous catalyst for the aerobic oxidation of various aromatic alcohols and sulfides under mild reaction conditions. The mechanistic studies showed that alcohol oxidation proceeds with oxygen species caused by the solid, and the high surface area of OMS-1 significantly contributes to an enhancement of the catalytic activity for aerobic oxidation.

Aerobic Photocatalysis: Oxidation of Sulfides to Sulfoxides

Sulfoxides constitute one of the most important functional groups in organic chemistry found in numerous pharmaceuticals and natural products. Sulfoxides are usually obtained from the oxidation of the corresponding sulfides. Among various oxidants, oxygen or air are considered the greenest and most sustainable reagent. Photochemistry and photocatalysis is increasingly applied in new, as well as traditional, yet demanding, reaction, like the aerobic oxidation of sulfides to sulfoxides, since photocatalysis has provided the means to access them in mild and effective ways. In this review, we will summarize the photochemical protocols that have been developed for the oxidation of sulfides to sulfoxides, employing air or oxygen as the oxidant. The aim of this review is to present: i) a historical overview, ii) the key mechanistic studies and proposed mechanisms and iii) categorize the different catalytic systems in literature.

Research progress of catalytic oxidation of volatile organic compounds over Mn-based catalysts – a review

With the rapid development of urbanization and industrialization, environmental pollution has become more severe. Volatile organic compounds (VOCs) could be originated from the following sources: domestic, mobile and industrial sources. As important air pollutants, VOCs could cause serious harm to the environment and human health. Therefore, removing VOCs has become a priority research direction of ecological issues. Among the many elimination methods, catalytic oxidation approaches are among the most effective and economical methods which can transform VOCs into CO2 and H2O. MnOx catalysts are among the most active catalysts, which can be further modified by different cations such as Cu2+, Co2+, Cr3+, Ni2+ and Ce4+ to form mixed oxides to improve the catalytic oxidation of VOCs activity. Moreover, MnOx can be loaded on the carrier, improving the redox and oxygen storage capacity and improving its stability and activity. This review explores the structure, preparation and oxidation state of Mn-based catalysts.

Base-Assisted Aerobic C-H Oxidation of Alkylarenes with a Murdochite-Type Oxide Mg6MnO8 Nanoparticle Catalyst

Heterogeneously catalyzed aerobic oxidative C-H functionalization under mild conditions is a chemical process to obtain desired oxygenated products directly. Nanosized murdochite-type oxide Mg₆MnO₈ (Mg₆MnO₈-MA) was successfully synthesized by the sol-gel method using malic acid. The specific surface area reached up to 104 m² g^-1, which is about 7 times higher than those (2-15 m² g^-1) of Mg₆MnO₈ synthesized by previously reported methods. Mg₆MnO₈-MA exhibited superior catalytic performance to those of other Mn- and Mg-based oxides, including manganese oxides with Mn-O-Mn active sites for the oxidation of fluorene with molecular oxygen (O₂) as the sole oxidant under mild conditions (40 °C). The present catalytic system was applicable to the aerobic oxidation of various substrates. The catalyst could be recovered by simple filtration and reused several times without obvious loss of its high catalytic performance. The correlation between the reactivity and the pK_a of the substrates, basic properties of catalysts, and kinetic isotope effects suggest a basicity-controlled mechanism of hydrogen atom transfer. The ¹⁸O-labeling experiments, kinetics, and mechanistic studies showed that H abstraction of the hydrocarbon proceeds via a mechanism involving O₂ activation. The structure of Mg₆MnO₈ consisting of isolated Mn⁴⁺ species located in a basic MgO matrix plays an important role in the present oxidation.

Excellent catalytic oxidation performance on toluene and benzene over OMS-2 with a hierarchical porous structure synthesized by a one-pot facile method: modifying surface properties by introducing different amounts of K

The formation of K–O–Mn bond weaken the bond of Mn–O–Mn which increases oxygen species mobility leading to excellent catalytic oxidation performance over OMS-2 by introducing different amounts of K.

Nanostructured Manganese Oxides within a Ring-Shaped Polyoxometalate Exhibiting Unusual Oxidation Catalysis

Nanosized manganese oxides have recently received considerable attention for their synthesis, structures, and potential applications. Although various synthetic methods have been developed, precise synthesis of novel nanostructured manganese oxides are still challenging. In this study, using a structurally defined nanosized cavity inside a ring-shaped polyoxometalate, we succeeded in synthesizing two types of discrete 18 and 20 nuclear nanostructured manganese oxides, Mn18 and Mn20, respectively. In particular, Mn18 showed much higher catalytic activity than other manganese oxides for the oxygenation of alkylarenes including electron-deficient ones, and the reaction proceeded through a unique reaction mechanism due to its unusual manganese oxide structure.

Recent progresses in the synthesis of MnO2 nanowire and its application in environmental catalysis

Nanostructured MnO₂ with various morphologies exhibits excellent performance in environmental catalysis owing to its large specific surface area, low density, and adjustable chemical properties. The one-dimensional MnO₂ nanowire has been proved to be the dominant morphology among various nanostructures, such as nanorods, nanofibers, nanoflowers, etc. The syntheses and applications of MnO₂-based nanowires also have become a research hotspot in environmental catalytic materials over the last two decades. With the continuous deepening of the research, the control of morphology and crystal facet exposure in the synthesis of MnO₂ nanowire materials have gradually matured, and the catalytic performance also has been greatly improved. Differences in the crystalline phase structure, preferably exposed crystal facets, and even the length of the MnO₂ nanowires will evidently affect the final catalytic performances. Besides, the modifications by doping or loading will also significantly affect their catalytic performances. This review carefully summarizes the synthesis strategies of MnO₂ nanowires developed in recent years as well as the influences of the phase structure, crystal facet, morphology, dopant, and loading amount on the catalytic performance. Besides, the cutting-edge applications of MnO₂ nanowires in the field of environmental catalysis, such as CO oxidation, the removal of VOCs, denitrification, etc., have been also summarized. The application of MnO₂ nanowire in environmental catalysis is still in the early exploratory stage. The gigantic gap between theoretical investigation and industrial application is still a great challenge. Compared with noble metal based traditional environmental catalytic materials, the lower cost of MnO₂ has injected new momentum and promising potential into this research field.

This review summarizes the synthesis strategies for MnO₂ nanowire and the influences of the phase structure, crystal facet, metal doping, and interface effect on its performance in various environmental catalysis processes.

Influence of nickel doping on MnO2 nanoflowers as electrocatalyst for oxygen reduction reaction

Abstract

Doping is promising strategy for the alteration of nanomaterials to enhance their optical, electrical, and catalytic activities. The development of electrocatalysts for oxygen reduction reactions (ORR) with excellent activity, low cost and durability is essential for the large-scale utilization of energy storage devices such as batteries. In this study, MnO2 and Ni-doped MnO2 nanowires were prepared through a simple co-perception technique. The influence of nickel concentration on electrochemical performance was studied using linear sweep voltammetry and cyclic voltammetry. The morphological, thermal, structural, and optical properties  of MnO2 and Ni-doped MnO2 nanowires were examined by SEM, ICP-OES, FT-IR, XRD, UV–Vis, BET and TGA/DTA. Morphological analyses showed that pure MnO2 and Ni-doped MnO2 had flower-like and nanowire structures, respectively. The XRD study confirmed the phase transformation from ε to α and β phases of MnO2 due to the dopant. It was also noted from the XRD studies that the crystallite sizes of pure MnO2 and Ni-doped MnO2 were in the range of 2.25–6.6 nm. The band gaps of MnO2 and 0.125 M Ni-doped MnO2 nanoparticles were estimated to be 2.78 and 1.74 eV, correspondingly, which can be seen from UV–Vis. FTIR spectroscopy was used to determine the presence of functional groups and M–O bonds (M = Mn, Ni). The TGA/TDA examination showed that Ni-doping in MnO2 led to an improvement in its thermal properties. The cyclic voltammetry  results exhibited that Ni-doped MnO2 nanowires have remarkable catalytic performance for ORR in 0.1 M KOH alkaline conditions. This work contributes to the facile preparation of highly active and durable catalysts with improved catalytic performance mainly due to the predominance of nickel.

Article Highlights

Graphic abstract

High-performance reversible aqueous zinc-ion battery based on iron-doped alpha-manganese dioxide coated by polypyrrole

The development of zinc-ion storage cathode materials for aqueous zinc-ion batteries (AZIBs) is a necessary step for the construction of large-scale electrochemical energy conversion and storage devices. Iron-doped alpha-manganese dioxide (α-MnO₂) nanocomposites were achieved in this study via pre-intercalation of Fe³⁺ during the formation of α-MnO₂ crystals. A polypyrrole (PPy) granular layer was fabricated on the surface of α-MnO₂ using acid-catalyzed polymerization of pyrroles. The pre-intercalation of Fe³⁺ effectively enlarges the lattice spacing of α-MnO₂ and consequently decreases the hindrance for Zn²⁺ insertion/extraction in the iron-doped α-MnO₂ coated by PPy (Fe/α-MnO₂@PPy) composite. Meanwhile, the PPy buffer layer can ameliorate electron and ion conductivity and prevent dissolution of α-MnO₂during the charge/discharge process. This unique structure makes the Fe/α-MnO₂@PPy composite an efficient zinc-ion storage cathode for AZIBs. The targeted Fe/α-MnO₂@PPy cathode achieves superior performance with reversible specific capacity (270 mA h g^-1 at 100 mA g^-1) and exhibits highdiffusioncoefficientof 10^-10-10^-14 cm^-2 s^-1. Therefore, a feasible approach is implemented on advanced electrode materials using in AZIBs for practical applications.

Unraveling the effects of potassium incorporation routes and positions on toluene oxidation over α-MnO2 nanorods: Based on experimental and density functional theory (DFT) studies

Alkali metal potassium is conducive to structure promotion and electronic modulation in metal oxides. Here, K species was successfully introduced into α-MnO₂via in situ synthesis (Pre-K/MnO₂) and hydrothermal impregnation method (Post-K/MnO₂) with target to boost the low-temperature reactivity and deep destruction efficiency for toluene oxidation. Results reveal that Post-K/MnO₂ possesses the highest catalytic activity with toluene (1000 ppm) totally mineralized at just 258 °C, achieving over 70 °C of temperature reduction than that of Pre-K/MnO₂. K specie shows obvious charge transfer balance ability in MnO₂, forming MnO₆-K-MnO₆ bridging bond and leading to more uniform energy of Mn-O bonds. High electron density of K⁺ can promote the activation of oxygen molecules, resulting in a better catalytic performance of toluene. Abundant Brønsted acid sites are beneficial for toluene adsorption and regeneration of hydroxyl on the surface, which promote the degradation of intermediates during toluene oxidation. Moreover, Post-K/MnO₂ shows satisfied catalytic performance under different space velocities and initial concentrations and humid condition. Density functional theory (DFT) calculation revealed the situation of oxygen vacancy and toluene/oxygen adsorption energy in catalysts with different K doping locations. Results showed that the adsorption energy is stronger when K located in large tunnel (0.46 × 0.46 nm), and it is easier to form oxygen vacancy while K entered the small tunnel (0.33 × 0.33 nm). The present work paves new insights into the designing of efficient transition metal oxide catalyst for VOC deep purification.

Synthesis of MnO2 derived from spent lithium-ion batteries via advanced oxidation and its application in VOCs oxidation

In this work, manganese is selectively and efficiently recovered from spent lithium-ion batteries via advanced oxidation by using potassium permanganate and ozone, and the transition metal-doped α-MnO₂ and β-MnO₂ are one-step prepared for catalytic oxidation of VOCs. The recovery rate of manganese can be approximately 100% while the recovery efficiency of cobalt, nickel, and lithium is less than 15%, 2%, and 1%, respectively. Compared with pure α-MnO₂ and β-MnO₂, transition metal-doped α-MnO₂ and β-MnO₂ exhibit better catalytic performance in toluene and formaldehyde removal attributed to their lower crystallinity, more defects, larger specific surface area, more oxygen vacancies, and better low-temperature redox ability. Besides, the introduction of the appropriate proportion of cobalt or nickel into MnO₂ can significantly improve its catalytic activity. Furthermore, the TD/GC-MS result indicates that toluene may be oxidized in the sequence of toluene - benzyl alcohol - benzaldehyde-benzoic acid - acetic acid, 2-cyclohexen-1-one, 4-hydroxy-, cyclopent-4-ene-1,3-dione - carbon dioxide. This method provides a route for the resource utilization of spent LIBs and the synthesis of MnO₂.

Heteropolyacid ionic liquid heterogeneously catalyzed synthesis of isochromans via oxa-Pictet-Spengler cyclization in dimethyl carbonate

A recyclable and efficient heterogeneous, green catalyst based on the synthesis of Keggin-type polyoxometalate (H₃PMo₁₂O₄₀) and vitamin B1 analogue 3-ethyl-5-(2-hydroxyethyl)-4-methylthiazol-3-ium (HEMT), i.e., [HEMTH]H₂[PMo₁₂O₄₀] was prepared. Oxa-Pictet–Spengler cyclization of arylethanols and aldehydes were catalyzed to afford various substituted isochromans in moderate conditions with excellent yields using dimethyl carbonate (DMC) as a green solvent. Furthermore, this protocol was applicable in a gram-scale reaction, and the catalyst could be recycled eight times without significant loss of activity.

An efficient heterogeneous and green catalyst [HEMTH]H₂[PMo₁₂O₄₀] was prepared to catalysis the oxa-Pictet–Spengler cyclization of arylethanols and aldehydes to afford isochromans with excellent yields using dimethyl carbonate as a green solvent.

A solvent-free solid catalyst for the selective and color-indicating ambient-air removal of sulfur mustard

Bis(2-chloroethyl) sulfide or sulfur mustard (HD) is one of the highest-tonnage chemical warfare agents and one that is highly persistent in the environment. For decontamination, selective oxidation of HD to the substantially less toxic sulfoxide is crucial. We report here a solvent-free, solid, robust catalyst comprising hydrophobic salts of tribromide and nitrate, copper(II) nitrate hydrate, and a solid acid (Nafion^TM) for selective sulfoxidation using only ambient air at room temperature. This system rapidly removes HD as a neat liquid or a vapor. The mechanisms of these aerobic decontamination reactions are complex, and studies confirm reversible formation of a key intermediate, the bromosulfonium ion, and the role of Cu(II). The latter increases the rate four-fold by increasing the equilibrium concentration of bromosulfonium during turnover. Cu(II) also provides a colorimetric detection capability. Without HD, the solid is green, and with HD, it is brown. Bromine K-edge XANES and EXAFS studies confirm regeneration of tribromide under catalytic conditions. Diffuse reflectance infrared Fourier transform spectroscopy shows absorption of HD vapor and selective conversion to the desired sulfoxide, HDO, at the gas-solid interface.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Fullerene soot and a fullerene nanodispersion as recyclable heterogeneous off-the-shelf photocatalysts

Metal-free heterogeneous photocatalysis, which requires no prior catalyst immobilization or chemical modification and can operate in green solvents, represents a highly-sought after, yet currently still underdeveloped, synthetic method. In this report we present a comparative study which aims to evaluate the use of unmodified fullerene soot and a fullerene nanodispersion as non-soluble and quasi-soluble carbon-based photocatalysts, respectively, for sulfide oxidation and other transformations using oxygen as an oxidant in ethanol. A wide range of sulfoxides were successfully prepared with good yields and chemoselectivity using a very low catalyst loading. The fullerene soot photocatalyst is easily recovered and shows excellent stability of the catalytic properties. The reaction was shown to proceed via a singlet oxygen pathway and has a high selectivity for aliphatic sulfides, whereas the oxidation of thioanisoles can be accomplished using an amine mediated electron transfer mechanism. The applicability of the fullerene nanodispersion as a general purpose photocatalyst was demonstrated in radical cyclization, boronic acid oxidation and imine formation reactions.

Enhanced catalytic activity of OMS-2 for carcinogenic benzene elimination by tuning Sr2+ contents in the tunnels

Cryptomelane-type manganese oxides (OMS-2) have been intensively investigated for application in the catalytic oxidation of carcinogenic benzene, and doping metal ions in the OMS-2 tunnels are widely used for modifying its catalytic activity. In this study, we reported a novel strategy of enhancing catalytic activity of OMS-2 for carcinogenic benzene elimination by tuning Sr²⁺ concentration in the tunnels. The catalytic activity result revealed that an obvious decrease (△T₅₀ = 27 °C and △T₉₀ = 37 °C) in T₅₀ and T₉₀ (corresponding to benzene conversions at 50 % and 90 %, respectively; initial benzene concentration was 2000 mg m^-3; contact time was 1.5 s) had been observed by increasing the Sr²⁺ concentration in the OMS-2 tunnels. The origin of Sr²⁺ doping effect on catalytic activity was theoretically and experimentally investigated by CO temperature-programmed reduction, ¹⁸O₂ isotope labeling, and density functional theory calculations. The result confirmed that increasing Sr²⁺ concentration in the tunnels not only promoted the lattice oxygen activity, but also facilitated the generation of more oxygen vacancy defects, thus considerably improving the catalytic activity of OMS-2.

Highly Efficient CuO/α-MnO2 Catalyst for Low-Temperature CO Oxidation

Copper manganese composite (hopcalite) catalyst has been widely explored for low-temperature CO oxidation reactions. However, the previous reports on the stabilization of such composite catalysts have shown that they deactivated severely under moist conditions. Herein, we developed an α-MnO₂ nanorod-supported copper oxide catalyst that is very active and stable for the conditions with or without moisture by the deposition precipitation (DP) method. Incredibly, the CuO/MnO₂ DP catalyst (with 5 wt % copper loading) achieves superior activity with a reaction rate of 9.472 μmol^-1·g_cat^-1·s^-1 even at ambient temperatures, which is at least double times of that for the reported copper-based catalyst. Additionally, the CuO/MnO₂ DP catalyst is significantly more stable than the copper manganese composite catalysts reported in the literature under the presence of 3% water vapor as well as without moisture. A correlation between the catalytic CO oxidation activity and textural characteristics was derived via multitechnique analyses. The results imply that the superior activity of the CuO/MnO₂ DP catalyst is associated with the proper adsorption of CO on partially reduced copper oxide as Cu(I)-CO and more surface oxygen species at the interfacial site of the catalyst.

Three Zr(IV)-Substituted Polyoxotungstate Aggregates: Structural Transformation from Tungstoantimonate to Tungstophosphate Induced by pH

Three novel Zr-substituted polyoxotungstate aggregates [H₂N(CH₃)₂]₇NaH₂[Zr₂Sb₂O₃(A-α-PW₉O₃₄)₂]·16H₂O (1), [H₂N(CH₃)₂]₆H₁₂[ZrSb₄(OH)O₂(A-α-PW₈O₃₂)(A-α-PW₉O₃₄)]₂·33H₂O (2), and [H₂N(CH₃)₂]₄Na_11.5H_4.5[Zr₄W₈Sb₄P₅O₄₉(OH)₅(B-α-SbW₉O₃₃)₂]·53H₂O (3) have been made in hydrothermal reactions of the [B-α-SbW₉O₃₃]^9- precursor with Zr⁴⁺ cations and PO₄^3- anions in the presence of dimethylamine hydrochloride and sodium acetate buffer (pH = 4.8) and structurally characterized. Different pH values induce structural transformation from tungstoantimonate (TA) to tungstophosphate (TP). 1 is a di-Zr-substituted sandwich-type TP, the tetranuclear heterometallic [Zr₂Sb₂O₃]⁸⁺ entity sandwiched by two [A-α-PW₉O₃₄]^9- moieties. 2 is a double sandwich-type structure, which can be perceived as two equivalent sandwiched [Sb₃(PW₈O₃₂)(PW₉O₃₄)]^11- further sandwiching one [Sb₂Zr₂(OH)₂O₄]⁴⁺ core to form a novel large-size sandwich-type architecture. Different from 1 and 2, 3 is a tetra-Zr-substituted sandwiched configuration, in which two [B-α-SbW₉O₃₃]^9- fragments sandwich a unique 21-core Sb-P-W-Zr oxo cluster ({Zr₄W₈Sb₄P₅}). Furthermore, the catalytic oxidation of aromatic thioethers by 3 as the heterogeneous catalyst has been investigated, showing high conversion and remarkable selectivity as well as excellent recyclability.

Two unusual nanosized Nd3+-substituted selenotungstate aggregates simultaneously comprising lacunary Keggin and Dawson polyoxotungstate segments

Two unique nanosized Nd³⁺-substituted selenotungstates Na₉K₈{[W₃Nd₂(H₂O)₃(NO₃)O₆](B-α-SeW₉O₃₃)₂(α-Se₂W₁₄O₅₂)}·35H₂O (1) and [H₂N(CH₃)₂]₇H₉Na₄{[W₂Nd₂(H₂O)₈O₆(OH)₂(β-Se₂W₁₄O₅₂)][W₃Nd₂(H₂O)₆O₇(B-α-SeW₉O₃₃)₂]₂}·84H₂O (2) were prepared by reacting NaSeO₃, Na₂WO₄·2H₂O with Nd(NO₃)₃·6H₂O in aqueous solution by controlling different cations and pH values. 1 was synthesized at pH = 4.3 in the presence of KCl, whereas 2 was synthesized at pH = 3.0 in the presence of [H₂N(CH₃)₂]·Cl. The most striking structural feature of 1 and 2 is the coexistence of vacant Keggin and Dawson segments in the polyoxoanion, which is extremely rare in the field of polyoxometalate chemistry. The trimeric polyoxoanion of 1 can be perceived as a fusion of one α-type tetravacant Dawson [α-Se₂W₁₄O₅₂]^14- unit and two trivacant Keggin [B-α-SeW₉O₃₃]^8- segments sealing a trigonal bipyramid pentanuclear [W₃Nd₂(H₂O)₃(NO₃)O₆]¹¹⁺ cluster, while the pentameric polyoxoanion of 2 can be described as one β-type tetravacant Dawson [β-Se₂W₁₄O₅₂]^14- fragment and four trivacant Keggin [B-α-SeW₉O₃₃]^8- segments anchoring a saddle-shaped [W₈Nd₆(H₂O)₂₀O₂₀(OH)₂]²⁴⁺ cluster. In addition, the measurements of catalytic oxidation of aromatic thioethers show that 2 as a catalyst possesses extremely outstanding catalytic performance under mild reaction conditions.

Shape-controllable synthesis of MnO2 nanostructures from manganese-contained wastewater for phenol degradation by activating peroxymonosulphate: performance and mechanism

Nanostructured manganese oxide materials were prepared from manganese-contained wastewater (MW) using a facile hydrothermal method and adopted as a catalyst to degrade phenol via activation of peroxymonosulphate (PMS). In the WM environment, δ-MnO₂ (flower-like Mn-2 with nanosheets) was transformed to α-MnO₂ (needle-like Mn-4 with nanowires). Catalytic evaluation experiments demonstrated that the needle-like MnO₂ was highly efficient for phenol removal, with a degradation efficiency of 100% within 15 min at the optimal conditions of catalyst dosage 0.2 g/L, PMS dosage 1.5 g/L, initial phenol concentration 0.025 g/L, initial pH 3 and temperature 25°C. Moreover, the needle-like MnO₂ catalyst could be recycled and the regenerated material after calcination remained excellent catalytic activity. On the surface of catalysts, PMS was activated by Mn^IV to generate [Formula: see text] which was the major reactive species attacking phenol. Overall, the needle-like MnO₂ prepared from MW was an efficient catalyst with low cost for organic wastewater treatment, realizing both Mn resource recycle and organic wastewater treatment.

Synergistic effect between gold nanoparticles and Fe-doped γ-MnO2 toward enhanced aerobic selective oxidation of ethanol

Gold nanoparticles supported on Fe-doped γ-MnO₂ were found to show a strong synergistic effect in the aerobic selective oxidation of ethanol to acetaldehyde.

Heterogeneously Catalyzed Aerobic Oxidation of Sulfides with a BaRuO3 Nanoperovskite

A rhombohedral BaRuO₃ nanoperovskite, which was synthesized by the sol-gel method using malic acid, could act as an efficient heterogeneous catalyst for the selective oxidation of various aromatic and aliphatic sulfides with molecular oxygen as the sole oxidant. BaRuO₃ showed much higher catalytic activities than other catalysts, including ruthenium-based perovskite oxides, under mild reaction conditions. The catalyst could be recovered by simple filtration and reused several times without obvious loss of its high catalytic performance. The catalyst effect, ¹⁸O-labeling experiments, and kinetic and mechanistic studies showed that substrate oxidation proceeds with oxygen species caused by the solid. The crystal structure of ruthenium-based oxides is crucial to control the nature of the oxygen atoms and significantly affects their oxygen transfer reactivity. Density functional theory calculations revealed that the face-sharing octahedra in BaRuO₃ likely are possible active sites in the present oxidation in sharp contrast to the corner-sharing octahedra in SrRuO₃, CaRuO₃, and RuO₂. The superior oxygen transfer ability of BaRuO₃ is also applicable to the quantitative conversion of dibenzothiophene into the corresponding sulfone and gram-scale oxidation of 4-methoxy thioanisole, in which 1.20 g (71% yield) of the analytically pure sulfoxide could be isolated.

Visible light driven water splitting through an innovative Cu-treated-δ-MnO2 nanostructure: probing enhanced activity and mechanistic insights

In this study, we have fabricated nanostructured thin films of δ-MnO2 on FTO glass substrates by a facile, room-temperature and low cost chemical bath deposition method. A copper treatment procedure in the synthesis steps results in a film of Cu-δ-MnO2, which displays significant photoactivity when used as a photocathode for hydrogen evolution reaction, with a photocurrent of 3.59 mA cm-2 (at 0 V vs. RHE) in a mild acidic solution. Furthermore, the electrodes also display significant electrocatalytic activity towards water oxidation reaching up to 10 mA cm-2 (at only 1.67 V vs. RHE). The Cu-δ-MnO2 film has been thoroughly characterized via various physicochemical, optical and electrochemical techniques, and an attempt has been made to explain the conductivity mechanism. It is suggested that Cu treatment enhances the photoactivity of δ-MnO2 films through a series of surface dominated processes, which facilitate reduced recombination and enhanced hole consumption at the interface of the electrode and electrolyte. These results establish birnessite-based manganese dioxides as suitable candidates for electrodes in water splitting cells and pave the way for atomic-level engineering of earth abundant materials to reach the ultimate goal of low-cost, sustainable generation of hydrogen.

Heterogeneous oxidative synthesis of quinazolines over OMS-2 under ligand-free conditions

OMS-2 is employed to synthesize heterocycles through selective oxidation without the help of ligands.

Simple low cost porphyrinic photosensitizers for large scale chemoselective oxidation of sulfides to sulfoxides under green conditions: targeted protonation of porphyrins

Large scale chemoselective photooxidation of sulfides to sulfoxides in the presence of the diacids ofmeso-tetra(phenyl)porphyrin with different acids is reported.

Insights into the structure–property–activity relationship in molybdenum-doped octahedral molecular sieve manganese oxides for catalytic oxidation

Experimental and computational studies on the properties of Mo-substituted octahedral molecular sieve Mn oxides provide insights into their excellent catalytic activities and stability for CO oxidation.