A substituent-modified new salicylaldehyde-diphenyl-azine based AIEgen: A promising skeleton for copper ion sensor

In this study, we have reported a novel 4-bromo-salicylaldehyde-diphenyl-azine (B-1), a new member of salicylaldehyde-diphenyl-azine (SDPA) family known for its excellent sensing properties. In contrast to the previously reported AIEgens, we found that the bromo-substitution at the 4th position of the salicylaldehyde moiety blue-shifted the emission by 10 and 15 nm as compared to the unsubstituted (Tong et.al 2017) and Bromo at the 5th position (Jain et.al 2023) respectively. Moreover, B-1 crystallizes instantly as the cooling process starts, which was not observed in the previously reported scaffolds. The sensing investigation again demonstrated the precise and ultrasensitive behavior of B-1 for copper ions. B-1 has a very low LOD value i.e. 29.2 x 10-8 M with a high association constant and binds with copper ion in 2:1 mode. This time we also analyzed the practical applicability in the solid phase using cotton swabs and performed the real-time estimation of copper ions in water and biological samples like urine and blood serum. The excellent percentage recovery and the RSD value suggest the precision of the experiments. Further, we also perform the sensing in living cancer HeLa cells. Altogether, we found that the SDPA skeleton is precise and ultrasensitive for copper ions and versatile which can be used variously to detect copper ions in the real world. This research will surely help in developing new specific skeleton-based AIEgens with desirable emission properties and precise applications in the future.

Highly Selective and Scalable Molecular Fluoride Sensor for Naked-Eye Detection

Fluoride is widely present in nature, and human exposure to it is generally regarded as inevitable. High levels of fluoride intake induce acute and chronic illnesses. To reduce potential harm to the general public, it is essential to create selective fluoride detectors capable of providing a colorimetric response for naked-eye detection without the need for sophisticated equipment. Here, we report a one-pot synthesis of four different diaminomaleonitrile-derived Schiff base sensors. The terephthalaldehyde adduct provided a strong color change visible to the naked eye at a F- concentration level as low as 2 ppm. From the evaluation against other anions, such as CN-, I-, Br-, Cl-, NO3-, PO43-, OAc-, and HSO4-, the molecular sensor displayed a visible color change exclusively upon exposure to fluoride, underscoring exceptional selectivity. As a key intermediate for understanding the mechanism, HF2- was confirmed by 19F nuclear magnetic resonance. Theoretical calculations suggested a deprotonation-triggered bathochromic shift brought about by the unique electronic structure of the sensor. Furthermore, the simple synthetic protocol from economically accessible materials allowed for the preparation of the compound on a large scale, rendering it a highly practical visual fluoride sensor.

A New Reversible Colorimetric Chemosensor Based on Julolidine Moiety for Detecting F. J Fluoresc 2021;31:1675-1682. [PMID: 34387807 DOI: 10.1007/s10895-021-02801-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

We synthesized an original reversible colorimetric chemosensor PDJ ((E)-9-((2-(6-chloropyridazin-3-yl)hydrazono)methyl)-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-8-ol) for the detection of F^-. PDJ displayed a selective colorimetric detection to F^- with a variation of color from colorless to yellow. Limit of detection of PDJ for F^- was calculated as 12.1 µM. The binding mode of PDJ and F^- turned out to be a 1:1 ratio using Job plot. Sensing process of F^- by PDJ was demonstrated by ¹H NMR titration and DFT calculation studies that suggested hydrogen bond interactions followed by deprotonation. Moreover, the practicality of PDJ was demonstrated via a reversible test with TFA (trifluoroacetic acid).

Highly Sensitive and Selective Spiropyran-Based Sensor for Copper(II) Quantification

The metal-binding capabilities of the spiropyran family of molecular switches have been explored for several purposes from sensing to optical circuits. Metal-selective sensing has been of great interest for applications ranging from environmental assays to industrial quality control, but sensitive metal detection for field-based assays has been elusive. In this work, we demonstrate colorimetric copper sensing at low micromolar levels. Dimethylamine-functionalized spiropyran (SP1) was synthesized and its metal-sensing properties were investigated using UV-vis spectrophotometry. The formation of a metal complex between SP1 and Cu²⁺ was associated with a color change that can be observed by the naked eye as low as ≈6 μM and the limit of detection was found to be 0.11 μM via UV-vis spectrometry. Colorimetric data showed linearity of response in a physiologically relevant range (0-20 μM Cu²⁺) with high selectivity for Cu²⁺ ions over biologically and environmentally relevant metals such as Na⁺, K⁺, Mn²⁺, Ca²⁺, Zn²⁺, Co²⁺, Mg²⁺, Ni²⁺, Fe³⁺, Cd²⁺, and Pb²⁺. Since the color change accompanying SP1-Cu²⁺ complex formation could be detected at low micromolar concentrations, SP1 could be viable for field testing of trace Cu²⁺ ions.

A multi-functional picolinohydrazide-based chemosensor for colorimetric detection of iron and dual responsive detection of hypochlorite

A novel effective chemosensor HPHN, (E)-6-hydroxy-N'-((2-hydroxynaphthalen-1-yl)methylene) picolinohydrazide, was synthesized. HPHN sensed Fe^3+/2+ with the changes of color from yellow to orange without obvious inhibition from other cations. In addition, HPHN could detect ClO^- by both the color change from yellow to colorless and the fluorescence quenching. The binding modes of HPHN with Fe^3+/2+ and ClO^- were determined to be 1:1 with Job plot and ESI-mass analysis. HPHN displayed low detection limits of 0.29 μM for Fe³⁺ and 0.77 μM for Fe²⁺. For ClO^-, the detection limit was 6.20 μM by colorimetric method and 3.99 μM by fluorescent one, respectively. Moreover, HPHN can be employed to quantify Fe³⁺ and ClO^- in environmental samples and apply to cell imaging for ClO^-.

Diastereoselective and Reversed Regioselective Annulations of N-Alkyl Anilines to Julolidines and Lilolidines

A three-component annulation reaction of N-alkyl anilines, cyclic 1,3-dicarbonyl compounds, and aryl aldehydes to julolidines and lilolidines is reported. The 6π-electrocyclization enabled the annulation to proceed with reversed regioselectivity as compared with the annulation that occurs in the Povarov reaction. Both cyclic and acyclic N-alkyl anilines participated in the reaction to provide a wide range of julolidines and lilolidines as the single regio- and diastereoisomers in good to excellent yields.

Hydrazone Based Dual - Responsive Colorimetric and Ratiometric Chemosensor for the Detection of Cu2+/F- Ions: DNA Tracking, Practical Performance in Environmental Samples and Tooth Paste

Colorimetric sensors have attracted wide scope of attentions due to its fascinating advantages, like handy, equipment-free and naked eye detections. In this investigation, a new and novel hydrazone based dual-responsive ratiometric/colorimetric chemosensor have been developed for highly selective and sensitive detection of Cu²⁺ and F^- ions in dimethyl sulfoxide (DMSO) solvent. The probe showed highly selective sensing towards Cu²⁺ and F^- ions by exhibiting a color change from pale yellow to yellowish green and pale yellow to yellowish brown respectively., in DMSO without any interference of other ions at same concentration. These experimental results have also substantiated by the NMR, HR-MS, UV-Vis spectroscopic, cyclic voltammetry, differential pulse voltammetry techniques and DFT calculations. The detection limits are found to be 5.8 μM for Cu²⁺ and 0.025 μM for F^- ions which is far below to the values recommended by WHO. The stoichiometric ratios between NAPCBH and Cu2+/ F- ions were confirmed from the Job's plots and ¹H NMR titration experiments which are found to be 2:1 and 1:1 respectively. The tracking ability of the DNA with NAPCBH-Cu²⁺ was studied by UV-Vis titration and Cyclic voltammetry measurements. It shows efficient affinity towards DNA with NAPCBH-Cu²⁺. The probe can also quantitatively determine the Copper and fluoride ions present in environmental samples & toothpaste. The NAPCBH was promptly recovered by utilizing very low concentration of HCl, showing that was found feasible and re-usable sensor for the convenient detection of Cu²⁺ and F^- ions. Graphical Abstract.

Design and synthesis of a novel coumarin-based framework as a potential chemomarker of a neurotoxic insecticide, azamethiphos

A coumarin based receptor has been synthesised and its organic nanoparticles were prepared. Further, these nanoparticles were explored as a chemosensor for copper(ii) ions and azamethiphos.

Coumarin based yellow emissive AIEE active probe: A colorimetric sensor for Cu2+ and fluorescent sensor for picric acid

A hydrazine derived ESIPT active Schiff base, 1-(8-methanylylidene-7-hydroxy-4-methyl-2H-chromen-2-one)-2-(2, 4-dihydroxybenzylidene) hydrazine, L was synthesized and characterized by elemental analysis and by various spectroscopic techniques. L exhibited a colourimetric response towards Cu²⁺ ion by changing from colorless to yellow with relatively a little or no interference of other common metal ions. The probe also showed good response for the detection of Cu²⁺ in real water samples. The H-aggregated L displayed AIEE property in acetonitrile/water mixture. The restriction of molecular motions endued the luminogen with a yellow fluorescence through ESIPT emission at 562 nm having relatively large Stock's shift of 205 nm. The scanning electron microscopic study was carried out to investigate the morphology of the nanoaggregate. The aggregated luminogen displayed it yellow emission in the pH range of 4-7 without affecting the intensity. The applicability of the probe for the detection of picric acid was also checked.

An efficient ICT-based ratio/colorimetric tripodal azobenzene probe for the recognition/discrimination of F-, AcO- and H2PO4- anions

The tripodal probe L was readily prepared via introducing rhodamine and azobenzene groups in a two-step procedure. Studies of the recognition properties indicated that probe L exhibited high sensitivity and selectivity towards F^-, AcO^- and H₂PO₄^- through a ratiometric colorimetric response with low detection limits of the order of 10^-7 M. The complexation behaviour was fully investigated by spectral titration, ¹H NMR spectroscopic titration and mass spectrometry. Probe L not only recognizes F^-, AcO^- and H₂PO₄^-, but can also distinguish between these three anions via the different ratiometric behaviour in their UV-vis spectra (387/505 nm for L-H₂PO₄^-, 387/530 nm for L-AcO^- and 387/575 nm for L-F^- complex) or via different colour changes (light coral for L-H₂PO₄^-, light pink for L-AcO^- and violet for the L-F^- complex). Additionally, given the presence of NH and OH groups in probe L, which can be protonated and deprotonated, probe L further exhibited an excellent pH response over a wide pH range (pH 3 to pH 12).

Diaminomaleonitrile-based Fluorophores as Highly Selective Sensing Platform for Cu2

A colorimetric and turn-on fluorescent chemodosimeter 1 based on diaminomaleonitrile was synthesized for Cu²⁺ detection. It showed high selectivity and sensitivity towards Cu²⁺ over the other tested metal ions. Probe 1 in acetonitrile exhibited a strong absorption band at 530 nm and weak fluorescence emission when excited at 480 nm, while the addition of Cu²⁺ could lead to a 30-nm blue shift of the absorption band and a remarkable fluorescence enhancement. Moreover, the detection limit of probe 1 for Cu²⁺ was calculated to be 28 nM. Quite different from the reported mechanism based on a metal-complexation induced fluorescence enhancement, the sensing mechanism was proved to be based on the Cu²⁺-promoted hydrolysis reaction, which was confirmed by ¹H NMR, ¹³C NMR and mass spectrum analysis. Studies on probe 2 were carried out to verify the universality of this sensing mechanism.

Coumarin based hydrazone as an ICT-based fluorescence chemosensor for the detection of Cu2+ ions and the application in HeLa cells

We have constructed a new coumarin based fluorescence probe BENZPYR with ICT character through condensation of N, N-diethylamino-3-acetyl coumarin with 2-hydrazinobenzothiazole. The absorbance and fluorescence spectral characteristics of BENZPYR revealed that the chemosensor can specifically detect for Cu²⁺ ions over other different metal ions and the lowest limit of detection was found in nano molar range. The turn off sensor of BENZPYR is related to chelation enhanced quenching (CHEQ) and intramolecular charge transfer (ICT) processes were serve as excellent fluorescent detection of Cu²⁺ ions in DMF medium. Fluorescence microscopy experiments revealed that probe BENZPYR may have application as a fluorophore to detect the Cu²⁺ in living cells. The simulated DFT analysis of electronic and structural properties and also UV-vis absorption spectra are in well accordance with the experimental UV-vis absorption spectra.

A quinoxaline-diaminomaleonitrile conjugate system for colorimetric detection of Cu2+ in 100% aqueous medium: observation of aldehyde to acid transformation

In this work, we have strategically incorporated a quinoxaline derivative and a diaminomaleonitrile moiety to construct a chemosensor, 2-amino-3-[(quinoxalin-2-ylmethylene)-amino]-but-2-enedinitrile (H2qm). The notable feature of this strategy is to generate a highly conjugated Schiff base platform with interesting binding properties. Remarkably, H2qm exhibited a visual sensing ability towards Cu2+ in 100% aqueous medium. The effectiveness of the chemosensor has been demonstrated by utilizing it to determine the Cu2+ concentration in real samples. Interestingly, the reaction between H2qm and Cu(ClO4)2·6H2O in DMSO yielded a quinoxaline-2-carboxylic acid based compound and single crystal X-ray diffraction analysis unveiled the resulting structure as [(qa)2Cu(H2O)2] (Hqa = quinoxaline-2-carboxylic acid).

A 1,8-naphthalimide–pyridoxal conjugate as a supramolecular gelator for colorimetric read out of F− ions in solution, gel and solid states

Naphthalimide–pyridoxal conjugated gelator 1 has been designed and synthesized. Compound 1 which forms stable greenish yellow colored gel in DMSO : H₂O (8 : 1 v/v), shows selective sensing of F⁻ in solution, gel and solid states under different conditions.

Recent progress in development of 2,3-diaminomaleonitrile (DAMN) based chemosensors for sensing of ionic and reactive oxygen species

2,3-Diaminomaleonitrile (DAMN) has proved to be a valuable organic π-conjugated molecule having many applications in the area of chemosensors for sensing of ionic and neutral species because of its ability to act as a building block for well-defined molecular architectures and scaffolds for preorganised arrays of functionality. In this article, we discussed the utilization of 2,3-diaminomaleonitrile (DAMN) for the design and development of chemosensor molecules and their application in the area of metal ion, anion and reactive oxygen species sensing. Along with these, we present different examples of DAMN based chemosensors for multiple ion sensing. We also discuss the ion sensing mechanism and potential uses in other related areas of research.

2,3-Diamniomaleonitrile (DAMN) is valuable π-conjugated organic scaffold molecule for designing of efficient chemosensors for sensing of ionic and Reactive Oxygen Species (ROS).

Spectroscopic studies of the intramolecular hydrogen bonding in o-hydroxy Schiff bases, derived from diaminomaleonitrile, and their deprotonation reaction products

The structural study of five Schiff bases derived from diaminomaleonitrile (DAMN) and 2-hydroxy carbonyl compounds was performed using ¹H, ¹³C and ¹⁵N NMR methods in solution and in the solid state as well. ATR-FTIR and X-Ray spectroscopies were used for confirmation of the results obtained by NMR method. The imine obtained from DAMN and benzaldehyde was synthesized as a model compound which lacks intramolecular hydrogen bond. Deprotonation of all synthesized compounds was done by treating with tetramethylguanidine (TMG). NMR data revealed that salicylidene Schiff bases in DMSO solution exist as OH forms without intramolecular hydrogen bonds and independent on the substituents in aromatic ring. In the case of 2-hydroxy naphthyl derivative, the OH proton is engaged into weak intramolecular hydrogen bond. Two of imines (salDAMN and 5-BrsalDAMN) exist in DMSO solution as equilibrium mixtures of two isomers (A and B). The structures of equilibrium mixture in the solid state have been studied by NMR, ATR-FTIR and X-Ray methods. The deprotonation of three studied compounds (salDAMN, 5-BrsalDAMN, and 5-CH₃salDAMN) proceeded in two different ways: deprotonation of oxygen atom (X form) or of nitrogen atom of free primary amine group of DAMN moiety (Y form). For 5-NO₂salDAMN and naphDAMN only one form (X) was observed.

Fluorescence probes based on AIE luminogen: application for sensing Hg2+ in aqueous media and cellular imaging

S1 and S2 could be applied for sensing Hg²⁺ in aqueous media and cellular imaging with remarkable AIEE.

Nanomolar-level selective dual channel sensing of Cu2+and CN−from an aqueous medium by an opto-electronic chemoreceptor

A novel chromogenic and fluorogenic chemoreceptor exhibiting a proclivity towards Cu²⁺and CN⁻, with applications in bioimaging and molecular electronics, was developed.

Colorimetric detection of iron and fluorescence detection of zinc and cadmium by a chemosensor containing a bio-friendly octopamine

A chemosensor containing a bio-friendly octopamine was developed for the colorimetric detection of iron and fluorescence detection of zinc and cadmium.

Diaminomalenonitrile-decorated cholesterol-based supramolecular gelator: aggregation, multiple analyte (hydrazine, Hg2+ and Cu2+) detection and dye adsorption

A low molecular weight gelator (LMWG) containing a diaminomalenonitrile functional group 1 forms supramolecular gels from DMF–H₂O and 1,2-dichlorobenzene. The DMF/H₂O gel is multi-analyte responsive (Hg²⁺, Cu²⁺ and hydrazine) with practical applications in dye adsorption from water.

Indigo Carmine-Cu complex probe exhibiting dual colorimetric/fluorimetric sensing for selective determination of mono hydrogen phosphate ion and its logic behavior

A new selective probe based on copper complex of Indigo Carmine (IC-Cu₂) for colorimetric, naked-eye, and fluorimetric recognition of mono hydrogen phosphate (MHP) ion in H₂O/DMSO (4:1v/v, 1.0mmolL^-1 HEPES buffer solution pH7.5) was developed. Detection limit of HPO₄^2- determination, achieved by fluorimetric and ₃lorimetric method, are 0.071 and 1.46μmolL^-1, respectively. Potential, therefore is clearly available in IC-Cu₂ complex to detect HPO₄^2- in micromolar range via dual visible color change and fluorescence response. Present method shows high selectivity toward HPO₄^2- over other phosphate species and other anions and was successfully utilized for analysis of P₂O₅ content of a fertilizer sample. The results obtained by proposed chemosensor presented good agreement with those obtained the colorimetric reference method. INHIBIT and IMPLICATION logic gates operating at molecular level have been achieved using Cu²⁺and HPO₄^2- as chemical inputs and UV-Vis absorbance signal as output.