One-pot synthesis of active copper-containing carbon dots with laccase-like activities

Cu2(OH)3NO3 nanozyme sensor array for the discrimination of multiple sulfides in food

In the food industry, sulfides are commonly used as preservatives and flavor regulators. However, long-term excessive intake of sulfides can lead to serious health problems. Therefore, developing efficient sulfide detection methods is particularly important. Here, we have effectively synthesized a novel bifunctional copper hydroxide nitrate (Cu2(OH)3NO3) nanozyme with outstanding peroxidase-like and laccase-like behaviors in basic deep eutectic solvents (DES). Because the various types of sulfides have diverse regulatory effects on the two catalytic behaviors of Cu2(OH)3NO3, a two channel nanozyme sensor array based on the peroxidase-like and laccase-like behaviors of Cu2(OH)3NO3 was constructed and successfully used for the identification of six kinds of sulfides (Na2S, Na2S2O3, Na2SO3, Na2SO4, NaHSO3, and Na2S2O8). Remarkably, the sensor array has achieved successful discrimination among six sulfides present in wine, egg, and milk samples. Finally, the sensor array has successfully distinguished and differentiated three actual samples (wine, egg, and milk). This study is of great significance in promoting the efficient construction of array units and improving the effective identification of sulfides in complex food samples.

A stable colorimetric biosensor for highly selective detection of malathion residue in food based on aptamer-regulated laccase-mimic activity

Malathion causes a serious threat to human health due to its widespread use in the environment. Herein, a novel and stable smartphone-integrated colorimetric biosensor for malathion detection is firstly established based on aptamer-enhanced laccase-mimicking activity. The results indicate that the M17-F aptamer can increase the affinity of Ag2O nanoparticles to the substrate 2,4-dichlorophenol and enhance their laccase-mimicking activity. Thus, abundant semiquinone radicals are produced in the catalytic system, which are combined with chromogenic agent to generate dark red products. The corresponding RGB values for the colour change of the solution can be easily obtained using smartphones, which is used for the rapid detection of malathion. The established biosensor for malathion has a limit of detection as low as 5.85 nmol·L-1, and displays good selectivity for other competitive pesticides. Moreover, further studies have verified the applicability of the biosensor in actual samples, indicating that it may have the potential for application in malathion detection in food.

Carbon-based nanozymes: design, catalytic mechanisms, and environmental applications

Carbon-based nanozymes are synthetic nanomaterials that are predominantly constituted of carbon-based materials, which mimic the catalytic properties of natural enzymes, boasting features such as tunable catalytic activity, robust regenerative capacity, and exceptional stability. Due to the impressive enzymatic performance similar to various enzymes such as peroxidase, superoxide dismutase, and oxidase, they are widely used for detecting and degrading pollutants in the environment. This paper presents an exhaustive review of the fundamental design principles, catalytic mechanisms, and prospective applications of carbon-based nanozymes in the environmental field. These studies not only serve to augment the comprehension on the intricate operational mechanism inherent in these synthetic nanostructures, but also provide essential guidelines and illuminating perspectives for advancing their development and practical applications. Future studies that are imperative to delve into the untapped potential of carbon-based nanozymes within the environmental domain was needed to be explored to fully harness their ability to deliver broader and more impactful environmental preservation and management outcomes.

Preparation and Application of Carbon Dots Nanozymes

Carbon dot (CD) nanozymes have enzyme-like activity. Compared with natural enzymes, CD nanozymes offer several advantages, including simple preparation, easy preservation, good stability and recycling, which has made them a popular research topic in various fields. In recent years, researchers have prepared a variety of CD nanozymes for biosensing detection, medicine and tumor therapy, and many of them are based on oxidative stress regulation and reactive oxygen species clearance. Particularly to expand their potential applications, elemental doping has been utilized to enhance the catalytic capabilities and other properties of CD nanozymes. This review discusses the prevalent techniques utilized in the synthesis of CD nanozymes and presents the diverse applications of CD nanozymes based on their doping characteristics. Finally, the challenges encountered in the current utilization of CD nanozymes are presented. The latest research progress of synthesis, application and the challenges outlined in the review can help and encourage the researchers for the future research on preparation, application and other related researches of CD nanozymes.

Ultrasound and defect engineering-enhanced nanozyme with high laccase-like activity for oxidation and detection of phenolic compounds and adrenaline

Perusing metal-based redox nanozyme offers new opportunity for pollutant removal and biosensor, but ultrasound (US)-driven laccase-like nanozyme remains a significant challenge, especially in combination with defect engineering strategy. Herein, the Cu2Ov@Ce-TCPP was synthesized by doping Ce3+ on the surface of Cu2O nanocube and then coating with the porphyrin sonosensitizer. The Ce-doped porphyrin metal-structure in nanozyme was demonstrated to generate oxygen vacancy defects, which could obviously promote the laccase-like activity of Cu2Ov@Ce-TCPP nanozyme under US. XPS characterization and density functional theory (DFT) theoretical calculation revealed that the ultrasonic stimulation is beneficial to accelerate the electron transfer rate and O2 adsorption to improve catalytic activity, and Cu2Ov@Ce-TCPP nanozyme exhibits low adsorption energy and activation energy due to the presence of oxygen defect site, resulting in high laccase-like activity. The interaction between Ce atom and porphyrin structure also improved the sonocatalytic ability of the nanozyme. Meanwhile, Cu2Ov@Ce-TCPP nanozyme has been used for detecting and degrading a series of phenolic compounds. The detection adrenaline method has a linear range of 3.3-1000 μM and a detection limit as low as 0.96 μM with good reproducibility. The developed US-enhancing and recyclable laccase-like nanozyme system provides a promising strategy for the oxidation and detection of phenolic compounds.

Gold versus platinum for chemical modification of carbon quantum dots from carboxymethyl cellulose: Tunable biomedical performance

Urgent requirements for medication from chronic inflammation and cancer are considerably interested, while, the recent reports were considered with investigating simple methods for synthesis. Metal-modified carbon quantum dots ("M-CQDs") were successfully ingrained from carboxymethyl cellulose under the assistance of infra-red irradiation. The current approach demonstrates a study for the effect of structural tuning for biomedical performance of CQDs via modifying of CQDs with either gold (Au-CQDs) or platinum (Pt-CQDs). Successive nucleation of Au-CQDs and Pt-CQDs was confirmed via different instrumental analyses like, TEM micrographs, Zeta potential, XRD, FTIR, 1HNMR& 13CNMR spectra. The data reveal that, modification of CQDs (8.7 nm) with gold was reflected in insignificant effect on the mean size of CQDs (8.9 nm), whereas, doping of platinum resulted in slight enlargement of the size (12.4 nm). However, Pt-CQDs were exhibited with the highest anti-inflammatory (cell viability percent 78 %) and antimicrobial action. On the other hand, Au-CQDs were shown with the highest anticancer affinity (reduction of cell viability 83 %) compared to the others. The current study approved the superiority of CQDs modified with either gold or platinum to be successfully applicable as potential therapeutic reagents for the treatment of either cancer or inflammation diseases.

A smartphone-based colorimetric assay using Cu-tannic acid nanosheets (Cu-TA NShs) as a laccase-mimicking nanozyme for visual detection of quercetin in vegetables

The interaction of Cu-tannic acid nanosheets (Cu-TA NShs) as nanozyme in a surfactant solution of CTAB under relatively acidic conditions is shown to exhibit a catalytic effect on quercetin (Qur). This catalytic property of Cu-TA NShs, which mimics laccase enzyme with many advantages, has been applied to developing a selective colorimetric sensor for the determination of trace amounts of Qur in vegetable samples. This strategy presents a desirable linear relationship between the absorbance signal intensity and the concentrations of Qur from 0.350 to 32.09 µM with a detection limit (LOD) of 0.064 µM (S/N = 3). The feasibility of the proposed portable colorimetric sensor for in situ analysis of the real samples has been validated with the high-performance liquid chromatography (HPLC) method as reference method, and two-tailed test (t test) statistical analysis certifies good agreement between the results. This enzyme-free and sensitive naked-eye sensor with the smartphone-based color map is promising to provide technical support for the rapid and visual detection of Qur in vegetables.

Characterization of amyloid-like metal-amino acid assemblies with remarkable catalytic activity

While enzymes are potentially useful in various applications, their limited operational stability and production costs have led to an extensive search for stable catalytic agents that will retain the efficiency, specificity, and environmental-friendliness of natural enzymes. Despite extensive efforts, there is still an unmet need for improved enzyme mimics and novel concepts to discover and optimize such agents. Inspired by the catalytic activity of amyloids and the formation of amyloid-like assemblies by metabolites, our group pioneered the development of novel metabolite-metal co-assemblies (bio-nanozymes) that produce nanomaterials mimicking the catalytic function of common metalloenzymes that are being used for various technological applications. In addition to their notable activity, bio-nanozymes are remarkably safe as they are purely composed of amino acids and minerals that are harmless to the environment. The bio-nanozymes exhibit high efficiency and exceptional robustness, even under extreme conditions of temperature, pH, and salinity that are impractical for enzymes. Our group has recently also demonstrated the formation of ordered amino acid co-assemblies showing selective and preferential interactions comparable to the organization of residues in folded proteins. The identified bio-nanozymes can be used in various applications including environmental remediation, synthesis of new materials, and green energy.

The mechanism of nanozyme activity of ZnO-Co3O4-v: Oxygen vacancy dynamic change and bilayer electron transfer pathway for wound healing and virtual reality revealing

Since the catalyst's surface was the major active location, the inner structure's contribution to catalytic activity was typically overlooked. Here, ZnO-Co3O4-v nanozymes with several surfaces and bulk oxygen vacancies were created. The O atoms of H2O2 moved inward to preferentially fill the oxygen vacancies in the interior and form new "lattice oxygen" by the X-ray photoelectron spectroscopy depth analysis and X-ray absorption fine structure. The internal Co2+ continually transferred electrons to the surface for a continuous catalytic reaction, which generated a significant amount of reactive oxygen species. Inner and outer double-layer electron cycles accompanied this process. A three-dimensional model of ZnO-Co3O4-v was constructed using virtual reality interactive modelling technology to illustrate nanozyme catalysis. Moreover, the bactericidal rate of ZnO-Co3O4-v for Methionine-resistant Staphylococcus aureus and Multiple drug resistant Escherichia coli was as high as 99%. ZnO-Co3O4-v was biocompatible and might be utilized to heal wounds following Methionine-resistant Staphylococcus aureus infection. This work offered a new idea for nanozymes to replace of conventional antibacterial medications.

CuCeTA nanoflowers as an efficient peroxidase candidate for direct colorimetric detection of glyphosate

Conventional nanozyme-based pesticide detection often requires the assistance of acetylcholinesterase. In this work, a CuCeTA nanozyme was successfully designed for the direct colorimetric detection of glyphosate. Direct detection can effectively avoid the problems caused by cascading with natural enzymes such as acetylcholinesterase. By assembling tannic acid, copper sulfate pentahydrate and cerium(III) nitrate hexahydrate, CuCeTA nanoflowers were prepared. The obtained CuCeTA possessed excellent peroxidase-like activity that could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB in the presence of hydrogen peroxide. Glyphosate could effectively inhibit the peroxidase-like activity of CuCeTA while other pesticides (fenthion, chlorpyrifos, profenofos, phosmet, bromoxynil and dichlorophen) did not show significant inhibitory effects on the catalytic activity of CuCeTA. In this way, CuCeTA could be used for the colorimetric detection of glyphosate with a low detection limit of 0.025 ppm. Combined with a smartphone and imageJ software, a glyphosate test paper was designed with a detection limit of 3.09 ppm. Fourier transform infrared spectroscopy demonstrated that glyphosate and CuCeTA might be bound by coordination, which could affect the catalytic activity of CuCeTA. Our CuCeTA-based nanozyme system exhibited unique selectivity and sensitivity for glyphosate detection and this work may provide a new strategy for rapid and convenient detection of pesticides.

Recent Advancements in the Formulation of Nanomaterials-Based Nanozymes, Their Catalytic Activity, and Biomedical Applications

Nanozymes are nanoparticles with intrinsic enzyme-mimicking properties that have become more prevalent because of their ability to outperform conventional enzymes by overcoming their drawbacks related to stability, cost, and storage. Nanozymes have the potential to manipulate active sites of natural enzymes, which is why they are considered promising candidates to function as enzyme mimetics. Several microscopy- and spectroscopy-based techniques have been used for the characterization of nanozymes. To date, a wide range of nanozymes, including catalase, oxidase, peroxidase, and superoxide dismutase, have been designed to effectively mimic natural enzymes. The activity of nanozymes can be controlled by regulating the structural and morphological aspects of the nanozymes. Nanozymes have multifaceted benefits, which is why they are exploited on a large scale for their application in the biomedical sector. The versatility of nanozymes aids in monitoring and treating cancer, other neurodegenerative diseases, and metabolic disorders. Due to the compelling advantages of nanozymes, significant research advancements have been made in this area. Although a wide range of nanozymes act as potent mimetics of natural enzymes, their activity and specificities are suboptimal, and there is still room for their diversification for analytical purposes. Designing diverse nanozyme systems that are sensitive to one or more substrates through specialized techniques has been the subject of an in-depth study. Hence, we believe that stimuli-responsive nanozymes may open avenues for diagnosis and treatment by fusing the catalytic activity and intrinsic nanomaterial properties of nanozyme systems.

Construction of Metal Organic Framework-Derived Fe-N-C Oxidase Nanozyme for Rapid and Sensitive Detection of Alkaline Phosphatase

Alkaline phosphatase (ALP) is a phosphomonoester hydrolase and serves as a biomarker in various diseases. However, current detection methods for ALP rely on bulky instruments, extended time, and complex operations, which are particularly challenging in resource-limited regions. Herein, we synthesized a MOF-derived Fe-N-C nanozyme to create biosensors for the coulometric and visual detection of ALP. Specifically, we found the Fe-N-C nanozyme can efficiently oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue-colored tetramethyl benzidine (TMBox) without the need for H2O2. To construct the biosensor, we incorporated the ALP enzymatic catalytic reaction to inhibit the oxidation of TMB by Fe-N-C oxidase nanozyme. This biosensor showed rapid and highly sensitive detection of ALP in both buffer and clinical samples. The limit of detection (LOD) of our approach could be achieved at 3.38 U L-1, and the linear range was from 5 to 60 U L-1. Moreover, we also developed a visual detection for ALP by using a smartphone-based assay and facilitated practical and accessible point-and-care testing (POCT) in resource-limited areas. The visual detection method also achieved a similar LOD of 2.12 U L-1 and a linear range of 5-60 U L-1. Our approach presents potential applications for other biomarker detections by using ALP-based ELISA methods.

Valence-Engineered Oxidase-Mimicking Nanozyme with Specificity for Aromatic Amine Oxidation and Identification

Oxidase-mimicking nanozymes with specificity for catalyzing oxidation of aromatic amines are of great significance for recognition of aromatic amines but rarely reported. Herein, Cu-A nanozyme (synthesized with Cu²⁺ as a node and adenine as a linker) could specifically catalyze oxidation of o-phenylenediamine (OPD) in Britton-Robinson buffer solution. Such a specific catalytic performance was also corroborated with other aromatic amines, such as p-phenylenediamine (PPD), 1,5-naphthalene diamine (1,5-NDA), 1,8-naphthalene diamine (1,8-NDA), and 2-aminoanthracene (2-AA). Moreover, the presence of salts (1 mM NaNO₂, NaHCO₃, NH₄Cl, KCl, NaCl, NaBr, and NaI) greatly mediated the catalytic activity with the order of NaNO₂ < blank ≈ NaHCO₃ < NH₄Cl ≈ KCl ≈ NaCl < NaBr < NaI, which was due to anions sequentially increasing interfacial Cu⁺ content via anionic redox reaction, while the effect of cations was negligible. With the increased Cu⁺ content, K_m decreased and V_max increased, indicating valence-engineered catalytic activity. Based on high specificity and satisfactory activity, a colorimetric sensor array with NaCl, NaBr, and NaI as sensing channels was constructed to identify five representative aromatic amines (OPD, PPD, 1,5-NDA, 1,8-NDA, and 2-AA) as low as 50 μM, quantitatively analyze single aromatic amine (with OPD and PPD as model analysts), and even identify 20 unknown samples with an accuracy of 100%. In addition, the performance was further validated through accurately recognizing various concentration ratios of binary, ternary, quaternary, and quinary mixtures. Finally, the practical applications were demonstrated by successfully discriminating five aromatic amines in tap, river, sewage, and sea water, providing a simple and feasible assay for large-scale scanning aromatic amine levels in environmental water samples.

Tartaric acid stabilized iridium nanoparticles with excellent laccase-like activity

Iridium nanoparticles with an average size of 1.7 nm (Tar-IrNPs) were synthesized by the reduction of IrCl₃ with NaBH₄ in the presence of tartaric acid. As prepared Tar-IrNPs showed not only oxidase, peroxidase and catalase activities but also exhibited unprecedented laccase-like activity, which can catalyze the oxidation of the substrates o-phenylenediamine (OPD) and p-phenylenediamine (PPD) accompanied by significant color changes. The superb catalytic performance is evidenced by the fact that Tar-IrNPs can achieve better laccase-like activity with only 2.5% of the dosage of natural laccase. Furthermore, they also exhibited superior thermal stability and broader pH adaptability (2.0-11) over that of natural laccase. Tar-IrNPs can retain more than 60% of their initial activity at 90 °C, while the natural laccase has totally lost its activity at 70 °C. At a prolonged reaction time, the oxidation products of OPD and PPD can form precipitates due to oxidation induced polymerization. Thus Tar-IrNPs have been successfully used for the determination and degradation of PPD and OPD.

Copper-Guanosine Nanorods (Cu-Guo NRs) as a Laccase Mimicking Nanozyme for Colorimetric Detection of Rutin

Inspired by laccase activity, herein, Cu-guanosine nanorods (Cu-Guo NRs) have been synthesized for the first time through a simple procedure. The activity of the Cu-Guo NR as the laccase mimicking nanozyme has been examined in the colorimetric sensing of rutin (Rtn) by a novel and simple spectrophotometric method. The distinct changes in the absorbance signal intensity of Rtn and a distinguished red shift under the optimum condition based on pH and ionic strength values confirmed the formation of the oxidized form of Rtn (o-quinone) via laccase-like nanozyme activity of Cu-Guo NRs. A vivid and concentration-dependent color variation from green to dark yellow led to the visual detection of Rtn in a broad concentration range from 770 nM to 54.46 µM with a limit of detection (LOD) of 114 nM. The proposed methodology was successfully applied for the fast tracing of Rtn in the presence of certain common interfering species and various complex samples such as propolis dry extract, human biofluids, and dietary supplement tablets, with satisfactory precision. The sensitivity and selectivity of the developed sensor, which are bonuses in addition to rapid, on-site, cost-effective, and naked-eye determination of Rtn, hold great promise to provide technical support for routine analysis in the real world.

Supramolecular assembly of benzophenone alanine and copper presents high laccase-like activity for the degradation of phenolic pollutants

Laccases are multicopper oxidases of significant importance for the degradation of phenolic pollutants. Because of the inherent defects of natural laccases in practical applications, herein, we discovered highly effective and non-cytotoxic laccase-like metallo-nanofibers based on the supramolecular assembly of single unnatural amino acid, benzophenone-alanine (BpA), in combination with copper ions. Structural analysis revealed that the catalytic BpA-Cu nanofibers possess a Cu(I)-Cu(II) electron transfer system similar to that in natural laccase. Our BpA-Cu nanofibers exhibit 4 times higher substrate affinity and 24% higher catalytic efficiency than the well-known high-performance industrialized laccase (Novozym 51003) in 2,4-dichlorophenol degradation. In addition, the BpA-Cu nanofibers were demonstrated to be stable (&gt;75% residual activity) in long-term storage at a wide range of pH, ionic strength, temperature, ethanol, and water sample, and to be readily recovered for pollutant degradation, keeping 83% of the laccase activity after 10 catalytic recycles. Remarkably, the nanofibers displayed a wide substrate spectrum, detecting and degrading a variety of phenolic pollutants with high activity than other laccase mimics reported in the literature. Furthermore, the biocompatibility of the material was proved with cultured cells. These findings demonstrated the potential of BpA-Cu nanofibers in mimicking laccases for environmental remediation.

Emerging and Versatile Platforms of Metal-Ion-Doped Carbon Dots for Biosensing, Bioimaging, and Disease Therapy

Metal ions possess abundant electrons and unoccupied orbitals, as well as large atomic radii, whose doping into carbon dots (CDs) is a facile strategy to endow CDs with additional physicochemical characteristics. After being doped with metal ions, CDs reveal obvious changes in their optical, electronic, and magnetic properties by adjustments to their electron density distribution and the energy gaps, leading them to be promising and competitive candidates as labeling probes, imaging agents, catalysts, nanodrugs, and so on. In this review, we summarize the fabrication methods of metal-ion-doped CDs (M-CDs), and highlight their biological applications including biosensing, bioimaging, tumor therapy, and anti-microbial treatment. Finally, the challenging future perspectives of M-CDs are analyzed. We hope this review will provide inspiration for further development of M-CDs in various biological aspects, and help readers who are interested in M-CDs and their biological applications.

Nanozyme-encoded luminescent detection for food safety analysis: An overview of mechanisms and recent applications

With the rapid growth in global food production, delivery, and consumption, reformative food analytical techniques are required to satisfy the monitoring requirements of speed and high sensitivity. Nanozyme-encoded luminescent detections (NLDs) integrating nanozyme-based rapid detections with luminescent output signals have emerged as powerful methods for food safety monitoring, not only because of their preeminent performance in analysis, such as rapid, facile, low background signal, and ultrasensitive, but also due to their strong attractiveness for future sensing research. However, the lack of a full understanding of the fundamentals of NLDs for food safety detection technologies limits their further application. In this review, a systematic overview of the mechanisms of NLDs and their applications in the food industry is summarized, which covers the nanozyme-mimicking types and their luminescent signal generation mechanisms, as well as their applications in monitoring common foodborne contaminants. As demonstrated by previous studies, NLDs are bridging the gap to practical-oriented food analytical technologies and various opportunities to improve their food analytical performance to be considered in the future are proposed.

Recent Developments in Heteroatom/Metal-Doped Carbon Dot-Based Image-Guided Photodynamic Therapy for Cancer

Carbon nanodots (CNDs) are advanced nanomaterials with a size of 2–10 nm and are considered zero-dimensional carbonaceous materials. CNDs have received great attention in the area of cancer theranostics. The majority of review articles have shown the improvement of CNDs for use in cancer therapy and bioimaging applications. However, there is a minimal number of consolidated studies on the currently developed doped CNDs that are used in various ways in cancer therapies. Hence, in this review, we discuss the current developments in different types of heteroatom elements/metal ion-doped CNDs along with their preparations, physicochemical and biological properties, multimodal-imaging, and emerging applications in image-guided photodynamic therapies for cancer.

Turn-on colorimetric detection of hydroquinone based on Au/CuO nanocomposite nanozyme

CuO nanorods bearing Au nanoparticles (Au/CuO nanocomposites) were prepared by a solution-phase synthesis and exhibited efficient hydroquinone (HQ)-oxidase activity with good specificity. The Au/CuO nanocomposites effectively catalyzed the oxidation of colorless HQ to brown benzoquinone with an absorbance maximum at 376 nm but did not catalyze the conversions of catechol or resorcinol. Kinetic studies indicated that the Au/CuO nanocomposites exhibited a strong affinity for HQ, with a Michaelis-Menten constant of K_m = 0.33 mM. Owing to the high catalytic activity and specificity, a strong color was observed at low concentrations of HQ. Quantitative measurement of HQ was performed via colorimetric analysis, which yielded a detection limit of 3 μM with a linear range of 5-200 μM. This colorimetric sensor was successfully applied to an HQ assay of real water samples with satisfactory results.

Copper-doped carbon dots with enhanced Fenton reaction activity for rhodamine B degradation

The Fenton reaction has attracted extensive attention due to its potential to be a highly efficient and environmentally friendly wastewater treatment technology. Noble copper-doped carbon dots (CuCDs) are prepared through a simple one-step hydrothermal method with 3,4-dihydroxyhydrocinnamic acid, 2,2'-(ethylenedioxy)bis(ethylamine) and copper chloride, endowing the Fenton reaction with enhanced catalytic activity for rhodamine B (RhB) degradation. The effects of the concentration of CuCDs, temperature, pH, oxygen (O2), metal ions and polymers on the catalytic activity of CuCDs are investigated. It is worth noting that electron transfer happening on the surface of CuCDs plays a vital role in the RhB degradation process. As evidenced by radical scavenger experiments and electron spin resonance (ESR) studies, CuCDs significantly boost the formation of hydroxyl radicals (˙OH) and singlet oxygen (1O2), facilitating the Fenton reaction for RhB degradation. Due to the strong oxidation of ROS generated by the Fe2+ + H2O2 + CuCD system, RhB degradation may involve the cleavage of the chromophore aromatic ring and the de-ethylation process. Additionally, the toxicity of RhB degradation filtrates is assessed in vitro and in vivo. The as-prepared CuCDs may be promising catalytic agents for the enhancement of the Fenton reaction.

Fluorescent Immunoassay with a Copper Polymer as the Signal Label for Catalytic Oxidation of O-Phenylenediamine

This work suggested that Cu²⁺ ion coordinated by the peptide with a histidine (His or H) residue in the first position from the free N-terminal reveals oxidase-mimicking activity. A biotinylated polymer was prepared by modifying His residues on the side chain amino groups of lysine residues (denoted as K_H) to chelate multiple Cu²⁺ ions. The resulting biotin-poly-(K_H-Cu)₂₀ polymer with multiple catalytic sites was employed as the signal label for immunoassay. Prostate specific antigen (PSA) was determined as the model target. The captured biotin-poly-(K_H-Cu)₂₀ polymer could catalyze the oxidation of o-phenylenediamine (OPD) to produce fluorescent 2,3-diaminophenazine (OPDox). The signal was proportional to PSA concentration from 0.01 to 2 ng/mL, and the detection limit was found to be eight pg/mL. The high sensitivity of the method enabled the assays of PSA in real serum samples. The work should be valuable for the design of novel biosensors for clinical diagnosis.

Fungus-Based MnO/Porous Carbon Nanohybrid as Efficient Laccase Mimic for Oxygen Reduction Catalysis and Hydroquinone Detection

Developing efficient laccase-mimicking nanozymes via a facile and sustainable strategy is intriguing in environmental sensing and fuel cells. In our work, a MnO/porous carbon (MnO/PC) nanohybrid based on fungus was synthesized via a facile carbonization route. The nanohybrid was found to possess excellent laccase-mimicking activity using 2,2′-azinobis (3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt (ABTS) as the substrate. Compared with the natural laccase and reported nanozymes, the MnO/PC nanozyme had much lower K_m value. Furthermore, the electrochemical results show that the MnO/PC nanozyme had high electrocatalytic activity toward the oxygen reduction reaction (ORR) when it was modified on the electrode. The hybrid nanozyme could catalyze the four-electron ORR, similar to natural laccase. Moreover, hydroquinone (HQ) induced the reduction of oxABTS and caused the green color to fade, which provided colorimetric detection of HQ. A desirable linear relationship (0–50 μM) and detection limit (0.5 μM) were obtained. Our work opens a simple and sustainable avenue to develop a carbon–metal hybrid nanozyme in environment and energy applications.

Improved stability and promoted activity of laccase by One-Pot encapsulation with Cu (PABA) nanoarchitectonics and its application for removal of Azo dyes

Immobilization of laccase helps protect the laccase and realizes repeated use. However, excessive encapsulation protection will also limit the release of laccase activity. This work introduces an effective one-pot method encapsulating laccase in the porous material of metal organic framework (MOF) containing specific metal ions, which provided a new way to solve the problem of limited laccase activity. The immobilization process was mathematically modeled. The morphological and encapsulated properties of the prepared materials were confirmed by the characterization results of SEM, FTIR, XRD, TGA, XPS and CLSM. The results showed that laccase was successfully encapsulated, and the Cu (PABA) with Cu2+ as the central structure promoted the laccase activity, the activity of immobilized laccase increased by 1.7 times. The prepared laccase@Cu (PABA) (Lac@Cu (PABA)) showed enhanced stability to extreme pH, high temperature and storage time. More importantly, the Lac@Cu (PABA) exhibited superior reusability, maintaining 70% removal rate of Direct Red 31 (DR31) even after 10 cycles. The dye removal rate of immobilized laccase reached 92% in 6 h under optimal conditions. This research improved the stability of laccase while releasing the activity of laccase, which not only broadened the applicable environment of laccase, but also increased the rate of degradation, and provided a new idea for the clean and efficient treatment of water pollution in textile industry.

Single amino acid bionanozyme for environmental remediation

Enzymes are extremely complex catalytic structures with immense biological and technological importance. Nevertheless, their widespread environmental implementation faces several challenges, including high production costs, low operational stability, and intricate recovery and reusability. Therefore, the de novo design of minimalistic biomolecular nanomaterials that can efficiently mimic the biocatalytic function (bionanozymes) and overcome the limitations of natural enzymes is a critical goal in biomolecular engineering. Here, we report an exceptionally simple yet highly active and robust single amino acid bionanozyme that can catalyze the rapid oxidation of environmentally toxic phenolic contaminates and serves as an ultrasensitive tool to detect biologically important neurotransmitters similar to the laccase enzyme. While inspired by the laccase catalytic site, the substantially simpler copper-coordinated bionanozyme is ∼5400 times more cost-effective, four orders more efficient, and 36 times more sensitive compared to the natural protein. Furthermore, the designed mimic is stable under extreme conditions (pH, ionic strength, temperature, storage time), markedly reusable for several cycles, and displays broad substrate specificity. These findings hold great promise in developing efficient bionanozymes for analytical chemistry, environmental protection, and biotechnology.

Bioinspired laccase-mimicking catalyst for on-site monitoring of thiram in paper-based colorimetric platform

A long-standing goal has been to create artificial enzymes with natural enzyme-like catalytic activity. Herein, a laccase-mimicking catalyst (GSH-Cu) is designed by simulating the copper active sites and spatial amino acid microenvironment of natural enzymes. In particular, the engineered GSH-Cu shows a catalytic function that conforms to Michaelis-Menten kinetics of natural laccase. The high catalytic activity of GSH-Cu can be easily inhibited by thiram through surface passivation to produce copper nanoparticles. We demonstrate that the developed GSH-Cu with high stability and recyclability can be used to fabricate effective colorimetric sensor for sensitive detection of thiram. The resulting absorption intensity can be employed to quantify thiram in the range of 2.5-250 ng mL^-1, which meets the detection requirement in fruit. Bestowed with the feasibility analysis of colorimetric output, a portable platform is designed by integrating GSH-Cu based test paper with a conventional smartphone for conveniently on-site quantified thiram. The proposed strategy about engineering enzyme-mimicking catalysts with excellent catalytic performance will open avenues for boosting the sensing application.

DiZyme: Open-Access Expandable Resource for Quantitative Prediction of Nanozyme Catalytic Activity

Enzymes suffer from high cost, complex purification, and low stability. Development of low-cost artificial enzymes of comparative or higher effectiveness is desired. Given its complexity, it is desired to presume their activities prior to experiments. While computational approaches demonstrate success in modeling nanozyme activities, they require assumptions about the system to be made. Machine learning (ML) is an alternative approach towards data-driven material property prediction achieving high performance even on multicomponent complex systems. Despite the growing demand for customized nanozymes, there is no open access nanozyme database. Here, a user-friendly expandable database of >300 existing inorganic nanozymes is developed by data collection from >100 articles. Data analysis is performed to reveal the features responsible for catalytic activities of nanozymes, and new descriptors are proposed for its ML-assisted prediction. A random forest regression (RFR) model for evaluation of nanozyme peroxidase activity is developed and optimized by correlation-based feature selection and hyperparameter tuning, achieving performance up to R²  = 0.796 for K_cat and R²  = 0.627 for K_m . Experiment-confirmed unknown nanozyme activity prediction is also demonstrated. Moreover, the DiZyme expandable, open-access resource containing the database, predictive algorithm, and visualization tool is developed to boost novel nanozyme discovery worldwide (https://dizyme.net).

Supramolecule self-assembly synthesis of amyloid phenylalanine-Cu fibrils with laccase-like activity and their application for dopamine determination

Laccases are multicopper proteins for dioxygen-involved oxidation of a broad spectrum of organic compounds. I Novel amyloid-like phenylalanine-Cu (F-Cu(II)) fibrils were developed, which were obtained via supramolecular self-assembly of Cu²⁺ and phenylalanine (F) under basic condition. The obtained amyloid-like fibrils represented highly periodic structure, of which the lattice unit was constructed via alternating hydrophobic (aromatic environment) and hydrophilic (both hydrogen bonding and Cu(II) coordination) interactions. Relative to natural laccases, the amyloid-like F-Cu(II) architecture exhibited comparable substrate affinity (Michaelis constant, K_m = 0.75 mM) and higher catalytic efficiency (k_cat/K_m = 773.33 × 10^-3 g^-1 min^-1L). Moreover, it exhibited remarkable tolerances in pH (4 ~ 10), temperature (room temperature ~ 200 ℃), organic solvent, and long-term storage (> 15 days). These stabilities were superior among the reported nature and artificial laccases, presenting a more promising candidate in various chemo- or bio-applications. In addition, F-Cu(II) fibrils could catalyze the oxidation of dopamine (DA) to a brown product, in which a new absorption band at 470 nm was observed. Based on this, a simple colorimetric assay for the detection of DA could be performed. We reported a novel amyloid-like phenylalanine-Cu fibrils, in which F-Cu⁺ complex can mimick the T1 site of natural laccase to oxidize the substrates. Then electrons transferred to F-Cu²⁺ complex via N-H···O=C hydrogen binding pathway. Finally, the dioxygen was transformed to water though radical reaction.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.

Enzyme-mimicking capacities of carbon-dots nanozymes: Properties, catalytic mechanism, and applications - A review

Nanozymes, novel engineered nanomaterial-based artificial enzymes, have been developed to overcome intrinsic drawbacks exist in natural enzymes including high-cost storage, structural instability, and chemical sensitivity. More recently, carbon dots (CDs) have received significant attention due to their biocompatibility, high catalytic activity, and simple surface functionalization, thus emerging as possible alternatives for biomedical and environmental applications. In this review, we analyze methods and precursors used to synthesize CDs with enzyme-mimicking behaviors. In addition, approaches such as doping or constructing hybrid nanozymes are included as possible strategies to enhance the catalytic performance of CDs. Recent studies have reported CDs that mimic different oxidoreductases, exhibiting peroxidase-, catalase-, oxidase/laccase-, and superoxide dismutase-like activities. Therefore, this review presents a detailed discussion of the mechanism, recent advances, and application for each oxidoreductase-like activity reported on nanozymes based on CDs nanomaterials. Finally, current challenges faced in the successful translation of CDs to potential applications are addressed to suggest research directions.

Current research progress on laccase-like nanomaterials

The first systematic review of the progress of research on the types and applications of laccase-like activity of nanomaterials is reported.

Enzyme (Single and Multiple) and Nanozyme Biosensors: Recent Developments and Their Novel Applications in the Water-Food-Health Nexus

The use of sensors in critical areas for human development such as water, food, and health has increased in recent decades. When the sensor uses biological recognition, it is known as a biosensor. Nowadays, the development of biosensors has been increased due to the need for reliable, fast, and sensitive techniques for the detection of multiple analytes. In recent years, with the advancement in nanotechnology within biocatalysis, enzyme-based biosensors have been emerging as reliable, sensitive, and selectively tools. A wide variety of enzyme biosensors has been developed by detecting multiple analytes. In this way, together with technological advances in areas such as biotechnology and materials sciences, different modalities of biosensors have been developed, such as bi-enzymatic biosensors and nanozyme biosensors. Furthermore, the use of more than one enzyme within the same detection system leads to bi-enzymatic biosensors or multi-enzyme sensors. The development and synthesis of new materials with enzyme-like properties have been growing, giving rise to nanozymes, considered a promising tool in the biosensor field due to their multiple advantages. In this review, general views and a comparison describing the advantages and disadvantages of each enzyme-based biosensor modality, their possible trends and the principal reported applications will be presented.

Progress in the Application of Carbon Dots-Based Nanozymes

As functional nanomaterials with simulating enzyme-like properties, nanozymes can not only overcome the inherent limitations of natural enzymes in terms of stability and preparation cost but also possess design, versatility, maneuverability, and applicability of nanomaterials. Therefore, they can be combined with other materials to form composite nanomaterials with superior performance, which has garnered considerable attention. Carbon dots (CDs) are an ideal choice for these composite materials due to their unique physical and chemical properties, such as excellent water dispersion, stable chemical inertness, high photobleaching resistance, and superior surface engineering. With the continuous emergence of various CDs-based nanozymes, it is vital to thoroughly understand their working principle, performance evaluation, and application scope. This review comprehensively discusses the recent advantages and disadvantages of CDs-based nanozymes in biomedicine, catalysis, sensing, detection aspects. It is expected to provide valuable insights into developing novel CDs-based nanozymes.

DNA-copper hybrid nanoflowers as efficient laccase mimics for colorimetric detection of phenolic compounds in paper microfluidic devices

Laccases are important multicopper oxidases that are involved in many biotechnological processes; however, they suffer from poor stability as well as high cost for production/purification. Herein, we found that DNA-copper hybrid nanoflowers, prepared via simple self-assembly of DNA and copper ions, exhibit an intrinsic laccase-mimicking activity, which is significantly higher than that of control materials formed in the absence of DNA. Upon testing all four nucleobases, we found that hybrid nanoflowers composed of guanine-rich ssDNA and copper phosphate (GNFs) showed the highest catalytic activity, presumably due to the affirmative coordination between guanine and copper ions. At the same mass concentration, GNFs had similar K_m but 3.5-fold higher V_max compared with those of free laccase, and furthermore, they exhibited significantly-enhanced stability in ranges of pH, temperature, ionic strength, and incubation period of time. Based on these advantageous features, GNFs were applied to paper microfluidic devices for colorimetric detection of diverse phenolic compounds such as dopamine, catechol, and hydroquinone. In the presence of phenolic compounds, GNFs catalyzed their oxidation to react with 4-aminoantipyrine for producing a colored adduct, which was conveniently quantified from an image acquired using a conventional smartphone with ImageJ software. Besides, GNFs successfully catalyzed the decolorization of neutral red dye much faster than free laccase. This work will facilitate the development of nanoflower-type nanozymes for a wide range of applications in biosensors and bioremediation.

'Laccase-like' properties of coral-like silver citrate micro-structures for the degradation and determination of phenolic pollutants and adrenaline

Laccases are multicopper containing oxidase enzymes that are highly important in environmental remediation and biotechnology. To date, complex Copper containing materials have been reported as laccase mimic, and the possibility of a non-Cu laccase mimic remained unknown. In this work, we report an exceptionally simple functional laccase mimic based on coral-like silver citrate (AgCit) microstructures. The AgCit was synthesized by a simple precipitation method and was found to possess excellent laccase-like activity capable of oxidizing phenolic substrates and the endocrine hormone adrenaline. Compared to the natural laccase enzyme, our reported laccase-mimic has a higher υ_max and lower K_m value using adrenaline as a substrate. In addition, the AgCit laccase mimic was observed to be stable at extreme pH, higher temperature, and suitable for long-term storage at room temperature. The laccase-like properties of the AgCit nanozyme were successfully applied for the quantification and degradation of various phenolic pollutants and the adrenaline hormone.

Micro-Bio-Chemo-Mechanical-Systems: Micromotors, Microfluidics, and Nanozymes for Biomedical Applications

Wireless nano-/micromotors powered by chemical reactions and/or external fields generate motive forces, perform tasks, and significantly extend short-range dynamic responses of passive biomedical microcarriers. However, before micromotors can be translated into clinical use, several major problems, including the biocompatibility of materials, the toxicity of chemical fuels, and deep tissue imaging methods, must be solved. Nanomaterials with enzyme-like characteristics (e.g., catalase, oxidase, peroxidase, superoxide dismutase), that is, nanozymes, can significantly expand the scope of micromotors' chemical fuels. A convergence of nanozymes, micromotors, and microfluidics can lead to a paradigm shift in the fabrication of multifunctional micromotors in reasonable quantities, encapsulation of desired subsystems, and engineering of FDA-approved core-shell structures with tuneable biological, physical, chemical, and mechanical properties. Microfluidic methods are used to prepare stable bubbles/microbubbles and capsules integrating ultrasound, optoacoustic, fluorescent, and magnetic resonance imaging modalities. The aim here is to discuss an interdisciplinary approach of three independent emerging topics: micromotors, nanozymes, and microfluidics to creatively: 1) embrace new ideas, 2) think across boundaries, and 3) solve problems whose solutions are beyond the scope of a single discipline toward the development of micro-bio-chemo-mechanical-systems for diverse bioapplications.