Spectroscopic characterization of europium binding to a calmodulin-EF4 hand peptide-polymer conjugate

The emergence of biological ligand as an alternative to chemical ligands enables a sustainable lanthanide extraction route. In this study, a peptide originating from the loop of domain 4 calmodulin (EF4) was synthesized and the interaction with europium ions was monitored using time resolved laser fluorescence spectroscopy (TRLFS). Despite being retracted from its full protein structure, the twelve amino acids of calmodulin-EF4 showed binding to europium. Europium-peptide complex formation was evident by an increase in decay time from 110 to 187 μs. The spectra of europium bound to peptide can be easily distinguished from the free europium ion as the 5D0 → 7F2 peak intensifies. When europium bound to the peptide-polymer conjugate, the decay time was further increased to 259 μs. This suggests that lanthanide binding can be enhanced by immobilizing the short peptide into a polymer matrix. The europium-peptide/conjugate bond was reversible, triggered by pH, promoting peptide reusability. Due to the fact that the study was conducted exclusively in water, it suggests minimal use of chemicals is possible while maintaining peptide affinity. This makes the calmodulin-EF4 peptide an ideal candidate as biological ligand. This study lays the groundwork for developing a peptide-based filter material for lanthanide separation.

GFN-xTB-Based Computations Provide Comprehensive Insights into Emulsion Radiation-Induced Graft Polymerization

In this article, a deep insight into emulsion radiation-induced graft polymerization (RIGP) was obtained by computing explicit solvation free energies, conformational entropy, monomer radius and dipole moments with the state-of-the-art Conformer-Rotamer Ensemble Sampling Tool (CREST) package primarily at semiempirical GFN-xTB level. By leveraging the robustness of the CREST package, above parameters provided dynamic nature of methacrylate monomers with the consideration of realistic emulsion conditions. With the chemical and physical importance of the above results, CREST-determined explanatory variables sufficiently led to the building of the prediction models for the RIGP of methacrylate monomers. The machine learning model building resulted in effective reactivity predictions and unveiled important factors for the radiation-induced graft polymerization in a chemically interpretable fashion.

Cellular uptake and fate of cationic polymer-coated nanodiamonds delivering siRNA: a mechanistic study

Gene silencing using small interfering RNAs (siRNAs) is a selective and promising approach for treatment of numerous diseases. However, broad applications of siRNAs are compromised by their low stability in a biological environment and limited ability to penetrate cells. Nanodiamonds (NDs) coated with cationic polymers can enable cellular delivery of siRNAs. Recently, we developed a new type of ND coating based on a random copolymer consisting of (2-dimethylaminoethyl) methacrylate (DMAEMA) and N-(2-hydroxypropyl) methacrylamide (HPMA) monomers. These hybrid ND-polymer particles (Cop+-FND) provide near-infrared fluorescence, form stable complexes with siRNA in serum, show low toxicity, and effectively deliver siRNA into cells in vitro and in vivo. Here, we present data on the mechanism of cellular uptake and cell trafficking of Cop+-FND : siRNA complexes and their ability to selectively suppress mRNA levels, as well as their cytotoxicity, viability and colloidal stability. We identified clathrin-mediated endocytosis as the predominant entry mechanism for Cop+-FND : siRNA into U-2 OS human bone osteosarcoma cells, with a substantial fraction of Cop+-FND : siRNA following the lysosome pathway. Cop+-FND : siRNA potently inhibited the target GAPDH gene with negligible toxicity and sufficient colloidal stability. Based on our results, we suggest that Cop+-FND : siRNA can serve as a suitable in vivo delivery system for siRNA.

Characterizing Conformational Change of a Thermoresponsive Polymeric Nanoparticle with Raman Spectroscopy

Molecular conformational changes in the collapsing and reswelling processes occurring during the phase transition at the lower critical solution temperature (LCST) of the polymer are not well understood. In this study, we characterized the conformational change of Poly(oligo(Ethylene Glycol) Methyl Ether Methacrylate)-144 (POEGMA-144) synthesized on silica nanoparticles using Raman spectroscopy and zeta potential measurements. Changes in distinct Raman peaks associated with the oligo(Ethylene Glycol) (OEG) side chains (1023, 1320, and 1499 cm^-1) with respect to the methyl methacrylate (MMA) backbone (1608 cm^-1) were observed and investigated under increasing and decreasing temperature profiles (34 °C to 50 °C) to evaluate the polymer collapse and reswelling around its LCST (42 °C). In contrast to the zeta potential measurements that monitor the change in surface charges as a whole during the phase transition, Raman spectroscopy provided more detailed information on vibrational modes of individual molecular moieties of the polymer in responding to the conformational change.

Use of a Photocleavable Initiator to Characterize Polymer Chains Grafted onto a Metal Plate with the Grafting-from Method

The thorough characterization of polymer chains grafted through a "grafting-from" process onto substrates based on the determination of number (Mn) and weight (Mw) average molar masses, as well as dispersity (Ɖ), is quite challenging. It requires the cleavage of grafted chains selectively at the polymer-substrate bond without polymer degradation to allow their analysis in solution with steric exclusion chromatography, in particular. The study herein describes a technique for the selective cleavage of PMMA grafted onto titanium substrate (Ti-PMMA) using an anchoring molecule that combines an atom transfer radical polymerization (ATRP) initiator and a UV-cleavable moiety. This technique allows the demonstration of the efficiency of the ATRP of PMMA on titanium substrates and verification that the chains were grown homogeneously.

A long chain-induced depletion effect for abnormal grafting in the preparation of bimodal bidisperse polymer-grafted nanoparticles

One of the challenging problems in the research field of polymer nanocomposites is how to prepare nanocomposites with high grafting density and strong ability of dispersion at the same time. For nanocomposites composed of bimodal bidisperse polymer chains and nanoparticles, the above requirements can be met by rationally adjusting the ratio of long and short polymer chains. In this study, the process of grafting bimodal bidisperse polymer chains onto the surface of nanoparticles in a grafting-to manner was investigated via computer simulation and theoretical methods. Three grafting strategies were designed: first short then long (SL) system, both short and long (Both) system and first long then short (LS) system. An abnormal phenomenon for the Both system was found by analyzing the grafting density of long and short polymer chains on the surface of nanoparticles. We speculate that the reason for this anomalous phenomenon is the "depletion effect" brought about by the long chains in the Both system. We employ the Polymer Reference Interaction Site Model (PRISM) theory to investigate this anomaly in-depth. By comparing the radial distribution function (RDF) predicted by the PRISM theory with the RDF results obtained by the molecular dynamics (MD) simulation, we found that with the increase of the number of long chains in the system, the grafting density of short polymer chains on the nanoparticle surface showed an obvious upward trend. The "depletion effect" brought by long chains was the main reason for higher short chains' grafting density of the Both system compared to the SL system. Our findings provide effective guidance for the design of nanoparticle-grafted bimodal bidisperse polymer chains and provide a theoretical basis for experimentation and production of polymer nanocomposites with better performance.

Hedgehog, Chamomile and Multipetal Polymeric Structures on the Nanoparticle Surface: Theoretical Insights

An analytical theory describing the variety of different morphological structures that spontaneously self-assemble in layers of amphiphilic homopolymers tightly grafted to spherical nanoparticle is proposed. For this purpose, the following structures were identified and outlined: hedgehogs, in which macromolecules are combined into cylindrical aggregates; chamomile, when cylindrical aggregates are connected by their ends into loops; multipetal structure with macromolecules self-assembling into thin lamellae; and unstructured, swollen and uniformly compacted shells. The results are presented in the form of state diagrams and serve as a basis for the directional design of the surface pattern by varying system parameters (particle radius, grafting density and degree of polymerization) and solvent properties (quality and selectivity).

Glycosylated gold nanoparticles in point of care diagnostics: from aggregation to lateral flow

Current point-of-care lateral flow immunoassays, such as the home pregnancy test, rely on proteins as detection units (e.g. antibodies) to sense for analytes. Glycans play a fundamental role in biological signalling and recognition events such as pathogen adhesion and hence they are promising future alternatives to antibody-based biosensing and diagnostics. Here we introduce the potential of glycans coupled to gold nanoparticles as recognition agents for lateral flow diagnostics. We first introduce the concept of lateral flow, including a case study of lateral flow use in the field compared to other diagnostic tools. We then introduce glycosylated materials, the affinity gains achieved by the cluster glycoside effect and the current use of these in aggregation based assays. Finally, the potential role of glycans in lateral flow are explained, and examples of their successful use given.

Antibody-based lateral flow (immune) assays are well established, but here the emerging concept and potential of using glycans as the detection agents is reviewed.

Surface modifications of Gold Nanoparticles: Stabilization and Recent Applications in Cancer Therapy

Gold nanoparticles (GNP) are noble metal nanocarriers that have been recently researched upon for pharmaceutical applications, imaging, and diagnosis. These metallic nanocarriers are easy to synthesize using chemical reduction techniques as their surface can be easily modified. Also, the properties of GNP are significantly affected by its size and shape which mandates its stabilization using suitable techniques of surface modification. Over the past decade, research has focused on surface modification of GNP and its stabilization using polymers, polysaccharides, proteins, dendrimers, and phase-stabilizers like gel phase or ionic liquid phase. The use of GNP for pharmaceutical applications requires its surface modification using biocompatible and inert surface modifiers. The stabilizers used, interact with the surface of GNP to provide either electrostatic stabilization or steric stabilization. This review extensively discusses the surface modification techniques for GNP and the related molecular level interactions involved in the same. The influence of various factors like the concentration of stabilizers used their characteristics like chain length and thickness, pH of the surrounding media, etc., on the surface of GNP and resulting to stability have been discussed in detail. Further, this review highlights the recent applications of surface-modified GNP in the management of tumor microenvironment and cancer therapy.

Double hydrophilic copolymers - synthetic approaches, architectural variety, and current application fields

Solubility and functionality of polymeric materials are essential properties determining their role in any application. In that regard, double hydrophilic copolymers (DHC) are typically constructed from two chemically dissimilar but water-soluble building blocks. During the past decades, these materials have been intensely developed and utilised as, e.g., matrices for the design of multifunctional hybrid materials, in drug carriers and gene delivery, as nanoreactors, or as sensors. This is predominantly due to almost unlimited possibilities to precisely tune DHC composition and topology, their solution behavior, e.g., stimuli-response, and potential interactions with small molecules, ions and (nanoparticle) surfaces. In this contribution we want to highlight that this class of polymers has experienced tremendous progress regarding synthesis, architectural variety, and the possibility to combine response to different stimuli within one material. Especially the implementation of DHCs as versatile building blocks in hybrid materials expanded the range of water-based applications during the last two decades, which now includes also photocatalysis, sensing, and 3D inkjet printing of hydrogels, definitely going beyond already well-established utilisation in biomedicine or as templates.

Gold-Polymer Nanocomposites for Future Therapeutic and Tissue Engineering Applications

Gold nanoparticles (AuNPs) have been extensively investigated for their use in various biomedical applications. Owing to their biocompatibility, simple surface modifications, and electrical and unique optical properties, AuNPs are considered promising nanomaterials for use in in vitro disease diagnosis, in vivo imaging, drug delivery, and tissue engineering applications. The functionality of AuNPs may be further expanded by producing hybrid nanocomposites with polymers that provide additional functions, responsiveness, and improved biocompatibility. Polymers may deliver large quantities of drugs or genes in therapeutic applications. A polymer alters the surface charges of AuNPs to improve or modulate cellular uptake efficiency and their biodistribution in the body. Furthermore, designing the functionality of nanocomposites to respond to an endo- or exogenous stimulus, such as pH, enzymes, or light, may facilitate the development of novel therapeutic applications. In this review, we focus on the recent progress in the use of AuNPs and Au-polymer nanocomposites in therapeutic applications such as drug or gene delivery, photothermal therapy, and tissue engineering.

SI-ATRP Decoration of Magnetic Nanoparticles with PHEMA and Post-Polymerization Modification with Folic Acid for Tumor Cells' Specific Targeting

Targeted nanocarriers could reach new levels of drug delivery, bringing new tools for personalized medicine. It is known that cancer cells overexpress folate receptors on the cell surface compared to healthy cells, which could be used to create new nanocarriers with specific targeting moiety. In addition, magnetic nanoparticles can be guided under the influence of an external magnetic field in different areas of the body, allowing their precise localization. The main purpose of this paper was to decorate the surface of magnetic nanoparticles with poly(2-hydroxyethyl methacrylate) (PHEMA) by surface-initiated atomic transfer radical polymerization (SI-ATRP) followed by covalent bonding of folic acid to side groups of the polymer to create a high specificity magnetic nanocarrier with increased internalization capacity in tumor cells. The biocompatibility of the nanocarriers was demonstrated by testing them on the NHDF cell line and folate-dependent internalization capacity was tested on three tumor cell lines: MCF-7, HeLa and HepG2. It has also been shown that a higher concentration of folic acid covalently bound to the polymer leads to a higher internalization in tumor cells compared to healthy cells. Last but not least, magnetic resonance imaging was used to highlight the magnetic properties of the functionalized nanoparticles obtained.

Iron Oxide/Polymer Core-Shell Nanomaterials with Star-like Behavior

Embedding nanoparticles (NPs) with organic shells is a way to control their aggregation behavior. Using polymers allows reaching relatively high shell thicknesses but suffers from the difficulty of obtaining regular hybrid objects at gram scale. Here, we describe a three-step synthesis in which multi-gram NP batches are first obtained by thermal decomposition, prior to their covalent grafting by an atom transfer radical polymerization (ATRP) initiator and to the controlled growing of the polymer shell. Specifically, non-aggregated iron oxide NPs with a core principally composed of γ-Fe₂O₃ (maghemite) and either polystyrene (PS) or polymethyl methacrylate (PMMA) shell were elaborated. The oxide cores of about 13 nm diameter were characterized by dynamic light scattering (DLS), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). After the polymerization, the overall diameter reached 60 nm, as shown by small-angle neutron scattering (SANS). The behavior in solution as well as rheological properties in the molten state of the polymeric shell resemble those of star polymers. Strategies to further improve the screening of NP cores with the polymer shells are discussed.

Poly(ethylene oxide) grafted silica nanoparticles: efficient routes of synthesis with associated colloidal stability

In this study, poly(ethylene oxide) monomethyl ether (MPEO) of molecular weight of 5000, 10 000, and 20 000 g mol-1 were grafted onto colloidal silica nanoparticles (NPs) of a 27.6 nm diameter using two distinct "grafting to" processes. The first method was based on the coupling reaction of epoxide-end capped MPEO with amine-functionalized silica NPs, while the second method was based on the condensation of triethoxysilane-terminated MPEO onto the unmodified silica NPs. The influence of PEO molecular weight, grafting process and grafting conditions (temperature, reactant concentration, reaction time) on the PEO grafting density was fully investigated. Thermogravimetric analysis (TGA) was used to determine the grafting density which ranged from 0.12 chains per nm2 using the first approach to 1.02 chains per nm2 when using the second approach. 29Si CP/MAS NMR characterization indirectly revealed that above a grafting density value of 0.3 PEO chains per nm2, a dendri-graft PEO network was built around the silica surface which was composed of PEO chains directly anchored to the silica surface and those grafted to silica NPs by intermediate of >CH-O-Si- bonds. The colloidal stability of the particles during different steps of the grafting process was characterized by small-angle X-ray scattering (SAXS). We have found that the colloidal systems are stable whatever the achieved grafting density due to the strong repulsions between the NPs, with the strength of repulsion increasing with the molecular weight of the grafted MPEO chains.

In situ conversion from crew-cut to hairy micelles by surface-initiated polymerization

Whether spherical micelles of block copolymers have short or long coronas is intrinsically determined by the molecular weight of the corona-forming block with respect to that of the core block before the micelles are assembled. Because of the inherent conditions of packing copolymer chains into a micelle, the core diameter is altered when we assemble a micelle from a block copolymer having a long corona block, compared to that having a short corona block with the same length of the core block. However, micelles with the same core diameter but having various corona lengths can be guaranteed when the corona is extended upon surface-initiated polymerization on the micelles. Herein, we demonstrated in situ conversion from crew-cut to hairy micelles by selectively extending a corona block while maintaining the spherical shape of block copolymer micelles. We first synthesized block copolymers having a chain transfer agent (CTA) positioned at the end of the corona block and then assembled them into a crew-cut micelle. Employing this micelle as an assembly of macro-CTAs, we conducted surface-initiated polymerization on the micelle by photo-induced energy/electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. Since PET-RAFT enables the polymerization at room temperature, the corona block was selectively extended with preservation of the core diameter, thereby converting a crew-cut micelle to a hairy one. In addition, by applying the same polymerization protocol to a worm-like micelle, we could selectively extend the coronas, leading to the formation of a worm-like micelle with a long corona. If such copolymer chains were assembled into a micelle, we would obtain a spherical micelle instead of a worm-like micelle having a hairy corona, which is difficult to assess because of the inherent packing problem.

Photolabile Well-Defined Polystyrene Grafted on Silica Nanoparticle via Nitroxide-Mediated Polymerization (NMP)

Herein, the synthesis of a novel nitroxide-mediated polymerization (NMP) initiator bearing a photolabile ortho-nitrobenzyl (oNB) group allowing surface-initiated NMP preparation of well-defined photoresponsive polystyrene grafted on silica nanoparticles is described. The photocleavable and photoresponsive properties of the prepared materials are demonstrated using small angle X-ray scattering (SAXS) characterization.

Recent Advances in the Synthesis of Polymer-Grafted Low-K and High-K Nanoparticles for Dielectric and Electronic Applications

The synthesis of polymer-grafted nanoparticles (PGNPs) or hairy nanoparticles (HNPs) by tethering of polymer chains to the surface of nanoparticles is an important technique to obtain nanostructured hybrid materials that have been widely used in the formulation of advanced polymer nanocomposites. Ceramic-based polymer nanocomposites integrate key attributes of polymer and ceramic nanomaterial to improve the dielectric properties such as breakdown strength, energy density and dielectric loss. This review describes the "grafting from" and "grafting to" approaches commonly adopted to graft polymer chains on NPs pertaining to nano-dielectrics. The article also covers various surface initiated controlled radical polymerization techniques, along with templated approaches for grafting of polymer chains onto SiO2, TiO2, BaTiO3, and Al2O3 nanomaterials. As a look towards applications, an outlook on high-performance polymer nanocomposite capacitors for the design of high energy density pulsed power thin-film capacitors is also presented.

Mesoporous Silica Nanoparticles: Properties and Strategies for Enhancing Clinical Effect

Due to the theragnostic potential of mesoporous silica nanoparticles (MSNs), these were extensively investigated as a novel approach to improve clinical outcomes. Boasting an impressive array of formulations and modifications, MSNs demonstrate significant in vivo efficacy when used to identify or treat myriad malignant diseases in preclinical models. As MSNs continue transitioning into clinical trials, a thorough understanding of the characteristics of effective MSNs is necessary. This review highlights recent discoveries and advances in MSN understanding and technology. Specific focus is given to cancer theragnostic approaches using MSNs. Characteristics of MSNs such as size, shape, and surface properties are discussed in relation to effective nanomedicine practice and projected clinical efficacy. Additionally, tumor-targeting options used with MSNs are presented with extensive discussion on active-targeting molecules. Methods for decreasing MSN toxicity, improving site-specific delivery, and controlling release of loaded molecules are further explained. Challenges facing the field and translation to clinical environments are presented alongside potential avenues for continuing investigations.

Surface-initiated mechano-ATRP as a convenient tool for tuning of bidisperse magnetorheological suspensions toward extreme kinetic stability

Magnetic NPs grafted via mechano-ATRP served as a powerful agent for enhancing performance and stability of magnetorheological suspensions.

Synthesis of poly(caprolactone)-block-poly[oligo(ethylene glycol)methyl methacrylate] amphiphilic grafted nanoparticles (AGNs) as improved oil dispersants

Amphiphilic polymers have been covalently grafted from a SiO2 core with room temperature polymerizations. These amphiphilic grafted nanoparticles have been found to uptake up to 30 times their mass in crude oil within a 24 hour window.

Mixed Polymer Brushes for "Smart" Surfaces

Mixed polymer brushes (MPBs) are composed of two or more disparate polymers covalently tethered to a substrate. The resulting phase segregated morphologies have been extensively studied as responsive "smart" materials, as they can be reversible tuned and switched by external stimuli. Both computational and experimental work has attempted to establish an understanding of the resulting nanostructures that vary as a function of many factors. This contribution highlights state-of-the-art MPBs studies, covering synthetic approaches, phase behavior, responsiveness to external stimuli as well as novel applications of MPBs. Current limitations are recognized and possible directions for future studies are identified.

Biofunctional Polymer Coated Au Nanoparticles Prepared via RAFT-Assisted Encapsulating Emulsion Polymerization and Click Chemistry

The use of reversible addition-fragmentation chain transfer (RAFT)-assisted encapsulating emulsion polymerization (REEP) has been explored to prepare diverse types of colloidal stable core-shell nanostructures. A major field of application of such nanoparticles is in emergent nanomedicines, which require effective biofunctionalization strategies, in which their response to bioanalytes needs to be firstly assessed. Herein, functional core-shell nanostructures were prepared via REEP and click chemistry. Thus, following the REEP strategy, colloidal gold nanoparticles (Au NPs, d = 15 nm) were coated with a poly(ethylene glycol) methyl ether acrylate (PEGA) macroRAFT agent containing an azide (N3) group to afford N3-macroRAFT@Au NPs. Then, chain extension was carried out from the NPs surface via REEP, at 44 °C under monomer-starved conditions, to yield N3-copolymer@Au NPs-core-shell type structures. Biotin was anchored to N3-copolymer@Au NPs via click chemistry using an alkynated biotin to yield biofunctionalized Au nanostructures. The response of the ensuing biotin-copolymer@Au NPs to avidin was followed by visible spectroscopy, and the copolymer-biotin-avidin interaction was further studied using the Langmuir-Blodgett technique. This research demonstrates that REEP is a promising strategy to prepare robust functional core-shell plasmonic nanostructures for bioapplications. Although the presence of azide moieties requires the use of low polymerization temperature, the overall strategy allows the preparation of tailor-made plasmonic nanostructures for applications of biosensors based on responsive polymer shells, such as pH, temperature, and photoluminescence quenching. Moreover, the interaction of biotin with avidin proved to be time dependent.

Self-assembly in amphiphilic spherical brushes

The structure of amphiphilic spherical brushes, consisting of the nano-SiO₂ core, the hyperbranched polyamidoamine subshell, and a grafted layer of long hydrophobically modified polyacrylamide (HMPAM) chains, in aqueous solution was analyzed and described in the framework of the original mean-field approach. The scaling estimations of the hydrodynamic radius of such polymer brushes as a function of the number of grafted macromolecules allow concluding that the HMPAM shells are in a globular state and that the region of the stretched chains adjacent to the grafting surface is a minor part of the grafted macromolecules and does not have a significant impact on the self-assembly of the HMPAM shell caused by the complex hydrophobic-hydrophilic composition of their monomer units. In mean-field theory, the amphiphilic nature of HMPAM was taken into account by attaching the hydrophobic side group H to some fraction of monomer units of the hydrophilic P backbone. The strong attraction of H groups causes the aggregation of macromolecules, whereas the affinity of hydrophilic P groups to solvent forces the aggregates to increase their surface. Due to such effective surface activity, in poor solvent, the grafted amphiphilic macromolecules could form a spherical compacted structure around the nanoparticle or self-assemble into a "hedgehog" structure with several "spines" having hydrophobic core and hydrophilic shell. State diagrams, obtained theoretically, reveal that the "hedgehog" structure is preferable for a wide range of energetic parameters.

Brushing the surface: cascade reactions between immobilized nanoreactors

Functionalization of hard or soft surfaces with, for example, ligands, enzymes or proteins, is an effective and practical methodology for the development of new applications. We report the assembly of two types of nanoreactors based upon poly(dimethylsiloxane)-block-poly(2-methyl-2-oxazoline) (PDMS-b-PMOXA) diblock copolymers as scaffold, uricase and lactoperoxidase as bio-catalysts located within the nanoreactors, and melittin as the biopores inserted into the hydrophobic shell. The nanoreactors were immobilized on poly(2-hydroxyethyl methacrylate)-co-poly(2-aminoethyl methacrylate hydrochloride) (PHEMA-co-P(2-AEMA·HCl) brushes-grafted wafer surfaces by utilizing the strong supramolecular interactions between biotin and streptavidin. The (PHEMA-co-P(2-AEMA·HCl) brushes on silicon surfaces were prepared by a surface initiating atom transfer radical polymerization (ATRP) "graft-from" technique. Cascade reactions between different surface-anchored nanoreactors were demonstrated by converting Amplex® Red to the fluorescent probe resorufin by using the H2O2 produced from uric acid and H2O. The detailed properties of the nanoreactors on the functionalized surface including the binding behaviours and cascade reactions were investigated using emission spectroscopy, transmission electron microscopy (TEM), light scattering (LS), atomic force microscopy (AFM) and a quartz crystal microbalance (QCM-D). The results are proof-of-principle for the preparation of catalytically functional engineered surface materials and lay the foundation for applying this advanced functional surface material in biosensing, implanting and antimicrobial materials preparation.

Microscopic characteristics of Janus nanoparticles prepared via a grafting-from reaction at the immiscible liquid interface

The dynamic process of synthesizing Janus nanoparticles (JNPs) at a water/oil two-phase interface using a grafting-from reaction is investigated via dissipative particle dynamics simulations. We find that the interfacial tension, the initial monomer concentration, and the reaction probability can greatly influence the microscopic characteristics of JNP structure. It is difficult to synthesize a symmetric JNP with an equal volume ratio between hydrophilic and hydrophobic parts by grafting-from methods unless the physical chemical conditions in the two phases are strictly symmetric, and there is always a disordered domain on the JNP at a two immiscible solvents interface. Interestingly, for certain routes for synthesizing JNPs with a grafting-from method, the higher interfacial tension between the water and oil phases may enhance the degree of disorder of the grafted chains. The asymmetric initial monomer concentration in solution and the reaction probability can be used to control the syntheses of asymmetric JNPs.

To what extent do polymeric stabilizers affect nanoparticles characteristics?

Colloidal synthesis of nanoparticles using polymeric stabilizers as a template of a structure directing agent provided a plethora of opportunities in fabricating nanoparticles (NPs) with controlled size, shape, composition and structural characteristics. To understand the complete potency of polymeric stabilizers during the synthesis of nanoparticles, the relationship between polymer characteristics such as structure, molecular weight and concentration and nanoparticles characteristics is discussed in depth. This review portrays the use of polymers to attain nanostructured materials via covalent and non-covalent approaches. These polymers can also serve as surfaces modifier as well as the growth regulators during the synthesis of nanomaterials. The effect provided by polymers that directs the formation of nanomaterials into desired forms is otherwise hard to achieve. We especially spotlight on the approaches for tuning the characteristic properties of nanoparticles via cautious choice of the polymer system with special focus to stimuli-responsive polymers. This review mainly focusses on answering the main challenging question; what is the ideal polymeric stabilizer system to obtain specific morphology, size and phase structure of nanoparticles? Such vital information will enable rational design of nanoparticles to meet specific needs for different applications.

Polymer Brush Graft-Modified Starch-Based Nanoparticles as Pickering Emulsifiers

We study biosourced core-shell particles with a starch-based core and thermo-responsive polymer brush shell using surface-initiated single-electron transfer living radical polymerization (SI-SET-LRP) as a Pickering stabilizer. The shell endows the Pickering stabilizer with reversible emulsification/demulsification of oil and water properties. The initiator attached to the starch-based nanosphere (Br-SNP) core particle was first fabricated using the precipitation method. Subsequently, dense poly( N-isopropylacrylamide) (PNIPAM) brush graft-modified starch-based nanoparticles (SNP- g-PNIPAM) were obtained via the SI-SET-LRP process. Interfacial properties of the resultant particles were analyzed by interfacial tensiometer measurements, as were the effects of the grafted polymer chain length and temperature on the interfacial activity. Pickering emulsion was obtained using SNP- g-PNIPAM particles as the stabilizer. The effect of the concentration of the Pickering stabilizer on the size of emulsion droplets was analyzed. The emulsification/demulsification process of the Pickering emulsion can be reversed and easily repeated by changing the temperature.

Impact of critical micelle concentration of macroRAFT agents on the encapsulation of colloidal Au nanoparticles

HYPOTHESIS

Reversible addition fragmentation chain transfer (RAFT) - assisted encapsulating emulsion polymerization (REEP) has received considerable attention as an efficient strategy to prepare colloidal stable shell@core nanoparticles. Generally, amphipathic macroRAFT agents are used but the effect of working above or below the critical micelle concentration (CMC) of macroRAFT agents needs to be addressed. Hence, it is necessary to understand if this parameter has an impact not only on the stability of the colloids but also on the molecular mass of the polymer shell.

METHODS

Here, the CMC of three different macroRAFT agent was determined and the effect of macroRAFT agents concentration on the colloidal stability of gold nanoparticles coated with macroRAFT agents (macroRAFT@Au) assessed. The subsequent chain extension from macroRAFT@Au NPs, resulting in encapsulated Au nanoparticles (copolymer@Au), has also been systematically studied.

FINDINGS

Using the REEP approach it was possible to obtain stable encapsulated Au NPs. Moreover, this strategy opens the possibility of adjusting the macroRAFT agents concentration to tune the length of the polymer chains grown around Au cores which is of major interest for the design of biosensors based on responsive polymer shells, such as pH, temperature and photoluminescence quenching.

In Situ Radical Polymerization and Grafting Reaction Simultaneously Initiated by Fluorinated Graphene

Fluorinated graphene (FG) showed interesting electrochemical, electronic, and mechanical properties, as well as chemical reactivity for multifarious functionalization of graphene material. This work reported a free radical polymerization and grafting from polymerization of a styrene monomer directly initiated by FG, which simultaneously provided free polymers and functionalized graphene with polymer chains grafted. The FG exhibited an almost comparative initiation efficiency to equivalent commercial initiator azodiisobutyronitrile under similar conditions, resulting in a high yield of free polystyrene (40.9%) with a high molecular weight ( M_n = 114.7 kg/mol). It was demonstrated that FG-triggered polymerization presented some special characteristics, such as a long lifetime of chain radical centers even when the reaction was stopped and insensitivity to oxygen molecules. The mechanistic study indicated that the polymerization was initiated by single-electron transfer reaction between FG and a monomer leading to formation of primary radicals; in addition, FG also played an important role in chain transfer and termination reactions during the polymerization process.

Crossing the bridge from molecular catalysis to a heterogenous electrode in electrocatalytic water oxidation

Significant progress has been made in designing single-site molecular Ru(II)-polypyridyl-aqua catalysts for homogenous catalytic water oxidation. Surface binding and transfer of the catalytic reactivity onto conductive substrates provides a basis for heterogeneous applications in electrolytic cells and dye-sensitized photoelectrosynthesis cells (DSPECs). Earlier efforts have focused on phosphonic acid (-PO₃H₂) or carboxylic acid (-CO₂H) bindings on oxide surfaces. However, issues remain with limited surface stabilities, especially in aqueous solutions at higher pH under conditions that favor water oxidation by reducing the thermodynamic barrier and accelerating the catalytic rate using atom-proton transfer (APT) pathways. Here, we address the problem by combining silane surface functionalization and surface reductive electropolymerization on mesoporous, nanofilms of indium tin oxide (ITO) on fluorine-doped tin oxide (FTO) substrates (FTO|nanoITO). FTO|nanoITO electrodes were functionalized with vinyltrimethoxysilane (VTMS) to introduce vinyl groups on the electrode surfaces by silane attachment, followed by surface electropolymerization of the vinyl-derivatized complex, [Ru^II(Mebimpy)(dvbpy)(OH₂)]²⁺ (1²⁺; Mebimpy: 2,6-bis(1-methyl-1H-benzo[d]imidazol-2-yl)pyridine; dvbpy: 5,5'-divinyl-2,2'-bipyridine), in a mechanism dominated by a grafting-through method. The surface coverage of catalyst 1²⁺ was controlled by the number of electropolymerization cycles. The combined silane attachment/cross-linked polymer network stabilized 1²⁺ on the electrode surface under a variety of conditions especially at pH > ∼6. Surface-grafted poly1²⁺ was stable toward redox cycling at pH ∼ 7.5 over an ∼4-h period. Sustained heterogeneous electrocatalytic water oxidation by the electrode gave steady-state currents for at least ∼6 h with a Faradaic efficiency of ∼68% for O₂ production.