Remediation of Cr(VI)-contaminated soil by CS/PPy coupling with Microbacterium sp. YL3

In this research, a new material, chitosan/polypyrrole (CS/PPy), was synthesized and linked with the Cr(VI)-reducing bacterial strain YL3 to treat Cr(VI)-polluted soil. The findings demonstrated that the synergistic application of strain YL3 and CS/PPy achieved the greatest reduction (99.6 %). During the remediation process, CS/PPy served as a mass-storage and sustained release agent in the soil, which initially decreased the toxic effects of high concentrations of Cr(VI) on strain YL3, thereby enhancing the Cr(VI) reduction efficiency of strain YL3. These combined effects significantly mitigated Cr(VI) stress in the soil and restored enzyme activities. Furthermore, wheat growth in the treated soil also significantly improved. High-throughput sequencing of the microorganisms in the treated soil revealed that CS/PPy was not only effective at removing Cr(VI) but also at preserving the original microbial diversity of the soil. This suggests that the combined treatment using strain YL3 and CS/PPy could rehabilitate Cr(VI)-contaminated soil, positioning CS/PPy as a promising composite material for future bioremediation efforts in Cr(VI)-contaminated soils.

Metal organic framework anchored onto biowaste mediated carbon material (rGO) for remediation of chromium (VI) by the photocatalytic process

Groundwater contaminated with hexavalent chromium Cr(VI) causes serious health concerns for the ecosystem. In this study, a hybrid amino functionalized MOF@rGO nanocatalyst was produced by utilization of a biowaste mediated carbon material (reduced graphene oxide; rGO) and its surface was modified by in situ synthesis of a nanocrystalline, mixed ligand octahedral MOF containing iron metal and NH2 functional groups and the prepared composite was investigated for Cr (VI) removal. The photocatalytic degradation of Cr(VI) in aqueous solutions was carried out under UV irradiation. Using a batch mode system, the effect of numerous control variables was examined, and the process design and optimization were carried out by response surface methodology (RSM). The photocatalyst, NH2-MIL(53)-Fe@rGO, was intended to be a stable and highly effective nanocatalyst throughout the recycling tests. XRD, SEM, EDS, FTIR examinations were exploited to discover more about surface carbon embedded with MOF. 2 g/L of NH2-MIL-53(Fe)/rGO was utilized in degrading 200 mg/L of Cr(VI) in just 100 min, implying the selective efficacy of such a MOF-rGO nanocatalyst. Moreover, the Eg determinations well agreed with the predicted range of 2.7 eV, confirming its possibility to be exploited underneath visible light, via the Tauc plot. Thus, MOF anchored onto biowaste derived rGO photo-catalyst was successfully implemented in chromium degradation.

Adsorption removal properties of β-cyclodextrin-modified pectin on cholesterol and sodium cholate

A novel adsorbent β-cyclodextrin-modified pectin was synthesized for removing cholesterol and bile salts from the gastric-intestinal passage. Different amounts of β-cyclodextrin were cross-linked to pectin by aldol condensation reaction via glutaraldehyde. The prepared β-cyclodextrin-modified pectins were successfully confirmed by characterization, showing a higher specific surface area and improved thermal stability with satisfactory cellular compatibility. The introduction of β-cyclodextrins dramatically improved the cholesterol adsorption capacity of pectin due to their hydrophobic cavities. Meanwhile, the modified pectins exhibited superior adsorption for sodium cholate than β-cyclodextrin or pectin itself, which was attributed to hydrophobic interactions. P10:1 displayed the strongest adsorption performance, with a maximum adsorption ability of 44.21 mg/g for cholesterol and 21.38 mg/g for sodium cholate. Furthermore, their adsorption favored the Langmuir isotherm model and pseudosecond-order kinetic model. These results indicate that modified pectin has potential as a nature-based adsorbent for removal of cholesterol and bile salts in the health food industry.

Reclamation of real textile wastewater by sequential advanced oxidation and adsorption processes using corn-cob based materials

Wastewater management has become crucial for sustaining biological life in the near future. One of the key aspects is integration of treatment processes aiming reuse of treated water for many purposes instead of water discharge. This study focused on combining two different methods, photo-Fenton-like oxidation, and adsorption, for treatment of real textile wastewater to improve water quality to be reused for irrigation. The real textile wastewater was collected from a local plant and subjected to photo-Fenton-like oxidation and adsorption as hybrid process. The operational parameters were optimized for each step by assessing the water quality according to the domestic regulations for irrigation water. The photo-Fenton-like oxidation itself was not successful to achieve the targeted water quality for reuse whereas adsorption as an additional step made the treated water reusable in terms of organic content. But the treated water still contained a certain amount of salinity due to extreme salt usage in textile processing. It was concluded that the treated water at the end of hybrid process could be used for salinity resistant plants such as sugar beet, barley, and cotton which demonstrates a promising contribution to the circular economy for biomass.

Polysaccharide-based biosorbents for cholesterol and bile salts in gastric-intestinal passage: Advances and future trends

Cholesterol is one of the hazard elements for many cardiovascular diseases, but many cholesterol-lowering drugs are expensive and unhealthy. Therefore, it is necessary to develop edible and safe biosorbents to reduce excess cholesterol and bile salts in the gastric-intestinal passage. Polysaccharide-based biosorbents offer a feasible strategy for decreasing them. This review summarized polysaccharide-based biosorbents that have been developed for adsorbing cholesterol and bile salts from the gastric-intestinal passage and analyzed common modification methods for these adsorbents. Finally, the adsorption models were also elucidated. Polysaccharides, including β-cyclodextrin, pectin, chitin/chitosan, dietary fiber extract, and cellulose, have been proposed for adsorbing cholesterol and bile salts in the gastric-intestinal passage as biosorbents. This is mainly due to the retention of pores, the capture of the viscosity network, and the help of hydrophobic interactions. In spite of this, the adsorption capacity of polysaccharides is still limited. Therefore, the modifications for them became the most popular areas in the recent studies of in vitro cholesterol adsorption. Chemical approaches namely grafting, (1) acetylation, (2) hydroxypropylation, (3) carboxymethylation, and (4) amination are considered to modify the polysaccharides for higher adsorption ability. Moreover, ultrasonic/microwave/pressure treatment and micron technology (microfluidization, micronization, and ball milling) are effective physical modification methods, while the biological approach mainly refers to enzymatic hydrolysis and microbial fermentation. The adsorption models are generally explained by two adsorption isotherms and two adsorption kinetics. In sum, it is reckoned that further food applications will follow soon.

Natural sourced and non-toxic hybrid materials for boosting the growth of lettuce in a hydroponic system

Nanostructured hybrid materials, fabricated by combining nanosilica (n-S) obtained from rice husk and oligochitosan (OC) obtained from the shrimp shell, are environmentally friendly substances that can applied in green agriculture. In this study, 50 mg/L of nanostructured hybrid materials were applied on lettuce (Lactuca sativa L. var. longifolia) at different stages of its growth. Most of the hybrid-material-treated lettuce plants showed better growth than that of the control. The most suitable ages for applying the hybrid material to the lettuce are the ages of three weeks (H3W1) and four weeks (H4W1) to stimulate their growth. The longest leaf of the H3W1-treated lettuce increased by 7.14%, its fresh weight by 8.51%, the numbers of leaves by 4.67%, and the content of total chlorophyll by 24.89% compared with those of the control lettuce. The longest leaf of H4W1 increased by 9.52%, its fresh weight by 26.27%, the number of leaves by 9.52%, and the total chlorophyll content by 52.87% compared with those of the control lettuce. Hence, the hybrid material could be used as a green agrochemical with a great potential in modern agriculture. It can help replace and reduce the use of toxic chemical fertilizers and plant-protection products currently used on the market.

Hydrophobization of aerogels based on chitosan, nanocellulose and tannic acid: Improvements on the aerogel features and the adsorption of contaminants in water

Hydrophobic chitosan aerogels are promising adsorbents for immiscible contaminants such as oils and organic solvents. However, few studies have reported the application of hydrophobic aerogels as adsorbent for organic contaminants dissolved in water. Herein, novel highly hydrophobic chitosan (CS) beads containing cellulose nanocrystals (CNC) and hydrophobized tannic acid (HTA) composite were prepared with different CS and CNC-HTA content to achieve an optimized adsorbent to remove emerging contaminants from water in batch and fixed-bed assays. The CS@CNC-HTA beads properties were assessed by FTIR, XRD, SEM, XPS, Micro-CT, WCA, and zeta potential. Supramolecular interactions and physical interlacements between CS and CNC-HTA enabled the formation of CS@CNC-HTA beads with high porosity (98.6%), great volume of open pore space (10.16 mm³) and hydrophobicity (121.8°). The 1:1 CS@CNC-HTA beads showed the best performance for removing the pharmaceutical sildenafil citrate, the basic blue 26 dye, and the surfactant cetylpyridinium chloride, reaching adsorption capacities of 86 (73%), 375 (84%), and 390 (90%) mg.g^-1, respectively. The 1:1 CS@CNC-HTA beads efficiently removed sildenafil citrate, basic blue 26 and cetylpyridinium chloride in fixed-bed experiments with exhaustion times of 890, 300, and 470 min, respectively. Theoretical calculations and adsorption assays indicate that the main attractive interactions are pyridinium-π, π-π, electrostatic and hydrophobic.

Chitosan coated - biogenic silver nanoparticles from wheat residues as green antifungal and nanoprimig in wheat seeds

In this study, chitosan-coated biogenic silver nanoparticles (AgNP-CH) were obtained through green chemistry by recycling wheat crop leaf residues. The nanoparticles were characterized by UV-VIS spectroscopy, and total reflectance-Fourier transform infrared spectroscopy confirmed the nanoparticle formation, and the incorporation of chitosan surrounding silver nanoparticles. The size and morphology of nanoparticles were evaluated by microscopy techniques, showing a size range of 2-10 nm, with spherical shape and narrow distribution. The antifungal assay indicated a higher antimicrobial activity showing values of minimum inhibitory concentrations of 41.7 μg/mL against Fusarium oxysporum, and 208.37 μg/mL for Aspergillus niger, A. versicolor and A. brasiliensis. Finally, non-phytotoxic effects were observed in germination assays at early plant stage of development, and an increase in chlorophyll levels were observed at the doses tested with AgNP-CH. Thus, the use of AgNP-CH could be a potential alternative for the prevention of fungal infections in cereals in the early stages of wheat crop development.

New bismuth oxyiodide/chitosan nanocomposite for ultrasonic waves expedited adsorptive removal of amoxicillin from aqueous medium: kinetic, isotherm and thermodynamic investigations

Amoxicillin (AMX) is a widely used antibiotic, which induces harmful effects to nature via bioaccumulation and persistence in the environment if discharged untreated into water bodies. In the current study, a novel bionanocomposite, bismuth oxyiodide-chitosan (BiOI-Ch), was synthesized by a facile precipitation method and its amoxicillin (AMX) adsorption capacity in the presence of ultrasonic waves has been explored. Multiple batch experiments were performed to achieve the optimum operational parameters for maximum adsorption of AMX and the obtained results were as follows: pH 3, 80 mg g^-1 AMX concentration, 1.7 g L^-1 adsorbent dose, temperature 298 K and ultrasonication time 20 min. Composite removed approximately 90% AMX from the solution under optimized conditions, while the maximal adsorption capacity was determined to be 81.01 mg g^-1. BiOI-Ch exhibited superior adsorption capacity as compared to pure BiOI (33.78 mg g^-1). To understand the dynamics of reaction, several kinetic and isotherm models were also examined. The adsorption process obeyed pseudo-second-order kinetic model (R² = 0.98) and was well fitted to Freundlich isotherm (R² = 0.99). The addition of biowaste chitosan to non-toxic bismuth-based nanoparticles coupled with ultrasonication led to enhanced functional groups as well as surface area of the nanocomposite resulting in superior adsorption capacity, fast adsorption kinetics and improved mass transfer for the removal of AMX molecules. Thus, this study demonstrates the synergistic effect of ultrasonication in improved performance of novel BiOI-Ch for potential application in the elimination of persistent and detrimental pollutants from industrial effluent after necessary optimization for large-scale operation.

Glutaraldehyde base-cross-linked chitosan-silanol/Fe3O4 composite for removal of heavy metals and bacteria

We designed and synthesised a magnetic adsorbent (Fe₃O₄@Si-OH@CS-Glu) combining chitosan-silanol groups with glutaraldehyde as a cross-linking agent, which has improved physicochemical properties and can be used to remove multiple heavy metals and bacteria from polluted water. The adsorbent was characterised with SEM, XRD, FTIR, BET, VSM, and zeta potential. Under optimum conditions, the adsorption efficiencies of Fe₃O₄@Si-OH@CS-Glu for Cr⁶⁺, As⁵⁺, Hg²⁺, and Se⁶⁺ were as high as 90.5%, 73.5%, 91.6%, and 100% respectively. In addition, Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) can be removed after 2-4 adsorption cycles with 2.5 mg Fe₃O₄@Si-OH@CS-Glu. The main adsorption mechanism of the adsorbent for heavy metals and bacteria is electrostatic adsorption. Overall, the synthesised Fe₃O₄@Si-OH@CS-Glu adsorbent showed high removal efficiency and adsorption capacity with a stable structure and easy separation. It has promising applications for the removal of heavy metals and bacteria from water.

Green synthesis of chitosan-based membrane modified with uniformly micro-sizing selenium particles decorated graphene oxide for antibacterial application

In this study, selenium microparticles (SeMPs) were green-synthesized by utilizing the Terminalia catappa leaves extract as an effective reducing agent. SeMPs were then decorated onto graphene oxide (GO) with the assistance of ultrasound using the ex-situ technique to obtain the SeMPs-GO composite. SeMPs and SeMPs-GO were thoroughly characterized with modern analytical methods, whereas the antibacterial performance of the composites was evaluated via the optical density method. Particularly, SeMPs-GO held up an inhibition of 99 % against both Gram-positive and Gram-negative bacteria strains as well as restrained 50 % of fungal activity. SeMPs-GO was additionally incorporated onto chitosan (CTS) to collect the SeMPs-GO/CTS membrane which was characterized by similar advanced analysis methods. The antibacterial property of the membrane was determined by the inhibition zone diameter. Furthermore, the membrane exhibited good thermal and mechanical characteristics, showing no sign of degradation at a temperature below 260 °C, and a tensile strength of 38 N/mm². The swelling degree reached 148 % after 6 h of immersion in water, which was stable after 72 h (153 %). The obtained membrane can potentially be utilized for medical and food applications.

Fabrication of polyamide-12/cement nanocomposite and its testing for different dyes removal from aqueous solution: characterization, adsorption, and regeneration studies

Polyamide-12/Portland cement nanocomposite was prepared by using the exfoliated adsorption method. The fabricated nanocomposite was applied first time to remove Congo red (CR), brilliant green (BG), methylene blue (MB), and methyl red (MR) from the synthetic wastewater. The polymer nanocomposite was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, elemental mapping, Brunauer-Emmett-Teller surface area analysis, and X-ray diffraction. The adsorption was rapid and all the studied dyes were absorbed on the surface of the polymer nanocomposite in 90 min. The point of zero charge was found at pH 5 and the factors such as pH, time, and temperature were found to affect the adsorption efficiency. Freundlich isotherm and pseudo-second-order models well-fitted the adsorption isotherm and kinetics data, respectively. The calculated maximum adsorption capacity was 161.63, 148.54, 200.40, and 146.41 mg/g for CR, BG, MB, and MR, respectively. The mode of the adsorption process was endothermic, spontaneous, and physical involving electrostatic attraction. On an industrial scale, the high percentage of desorption and slow decrease in the percentage of adsorption after every five regeneration cycles confirm the potential, practicality, and durability of the nanocomposite as a promising and advanced adsorbent for decolorization of colored wastewater.

P, Arora V, Sachdeva K, Sharma H, Dinda AK, Agrawal AK, Jassal M, Mohanty S. Promoting in-vivo bone regeneration using facile engineered load-bearing 3D bioactive scaffold

The worldwide incidence of bone disorders has trended steeply upward and is expected to get doubled by 2030. Biological mechanism of bone repair involves both osteo-conductivity and osteo-inductivity. In spite of the self-healing functionality after injury, bone tissue faces multitude of pathological challenges. Several innovative approaches have been developed to prepare biomaterial-based bone grafts. To design a suitable bone material, the freeze-drying technique has achieved significant importance among the other conventional methods. However, the functionality of the polymeric freeze-dried scaffold in in-vivo osteogenesis is in nascent stage. In this study facile, freeze dried, biomaterial-based load bearing 3D porous composite scaffolds have been prepared. The biocompatible scaffolds have been made by using chitosan (C), polycaprolactone (P), hydroxyapatite (H), glass ionomer (G), and graphene (gr). Scaffolds of eight different groups (C, P, CP, CPH, CPHG, CPHGgr1, CPHGgr2, CPHGgr3) have been designed and characterized to evaluate their applicability in orthopaedics. To evaluate the efficacy of the scaffolds a series of physio-chemical, morphological, and in-vitro & in-vivo biological experiments have been performed. From the obtained results it was observed that the CPHGgr1 is the ideal compatible material for Wharton’s Jelly derived mesenchymal stem cells and the blood cells. The in-vitro bone specific gene expression study revealed that, the scaffold assists MSCs osteogenic differentiation. Additionally, the in-vivo study on mice model was also performed for a period of 4 weeks and 8 weeks. The sub-cutaneous implantation of the designed scaffolds didn’t show any altered physiological condition in the animals, which indicated the in-vivo biocompatibility of the designed material. The histopathological study revealed that after 8 weeks of implantation, the CPHGgr1 scaffold supported significantly better collagen deposition and calcification. The facile designing of CPHGgr1 multicomponent nanocomposite provided an osteo-regenerative biomaterial with desired mechanical strength as an ideal regenerative material for cancellous bone tissue regeneration.

Chitosan nanoparticles loaded with garlic essential oil: A new alternative to tebuconazole as seed dressing agent

In this study, garlic essential oil (GEO) has been encapsulated in chitosan nanoparticles (NPCH) with sodium tripolyphosphate (TPP). Fourier transform infrared (FT-IR) spectroscopy, UV-vis spectrophotometry, thermogravimetric analysis (TGA) and X-ray diffraction (XRD) techniques were applied to characterize GEO-NPCH. The obtained nanoparticles exhibited a regular distribution and spherical shape with size range of 200-400 nm as revealed by scanning electron microscopy (SEM). The maximum encapsulation efficiency (EE) and loading capacity (LC) of GEO-loaded chitosan nanoparticles were about 32.8% and 19.8% respectively. Nanoparticle formulations of GEO were found to have antifungal activity against Aspergillus versicolor, A. niger and Fusarium oxysporum. In addition, they showed growth promoting effects by increasing emergence, shoot and root fresh weight on wheat, oat and barley.

Design and Manufacture of a Low-Cost Microfluidic System for the Synthesis of Giant Liposomes for the Encapsulation of Yeast Homologues: Applications in the Screening of Membrane-Active Peptide Libraries

The discovery of new membrane-active peptides (MAPs) is an area of considerable interest in modern biotechnology considering their ample applicability in several fields ranging from the development of novel delivery vehicles (via cell-penetrating peptides) to responding to the latent threat of antibiotic resistance (via antimicrobial peptides). Different strategies have been devised for such discovery process, however, most of them involve costly, tedious, and low-efficiency methods. We have recently proposed an alternative route based on constructing a non-rationally designed library recombinantly expressed on the yeasts’ surfaces. However, a major challenge is to conduct a robust and high-throughput screening of possible candidates with membrane activity. Here, we addressed this issue by putting forward low-cost microfluidic platforms for both the synthesis of Giant Unilamellar Vesicles (GUVs) as mimicking entities of cell membranes and for providing intimate contact between GUVs and homologues of yeasts expressing MAPs. The homologues were chitosan microparticles functionalized with the membrane translocating peptide Buforin II, while intimate contact was through passive micromixers with different channel geometries. Both microfluidic platforms were evaluated both in silico (via Multiphysics simulations) and in vitro with a high agreement between the two approaches. Large and stable GUVs (5–100 µm) were synthesized effectively, and the mixing processes were comprehensively studied leading to finding the best operating parameters. A serpentine micromixer equipped with circular features showed the highest average encapsulation efficiencies, which was explained by the unique mixing patterns achieved within the device. The microfluidic devices developed here demonstrate high potential as platforms for the discovery of novel MAPs as well as for other applications in the biomedical field such as the encapsulation and controlled delivery of bioactive compounds.

Quantitative characterization and effective inactivation of biological hazards in struvite recovered from digested poultry slurry

Struvite formed from digested poultry slurries can serve as an alternative to chemical fertilizers; however, the biological safety of such products is questionable. Therefore, quantification and inactivation of foodborne pathogens existing in struvite are important. Herein, the dynamics of foodborne pathogens' (Streptococcus faecalis, S. typhimurium, Clostridium perfringens, and Escherichia coli) living status, whether culturable and viable but non-culturable (VBNC) in struvite, were quantified for the first time. Meanwhile, inactivation technologies, namely high-humidity hot air impingement blanching (HHAIB), cold plasma, and hot air treatment, were evaluated and compared for their potential to inactivate/kill foodborne pathogens in struvite. An increase in precipitation pH from 9.0 to 11.0 decreased the culturable count of pathogens in the struvite from 75 to 86% to 7-20%, while the VBNC pathogen counts increased from 16 to 24% to 35-55%. Among the tested inactivation technologies, the HHAIB treatment at 130 °C for 120 s killed approximately 68-79% of foodborne pathogens in struvite precipitated at pH 9.0. VBNC pathogens increased from 16 to 24% to 57-68% after HHAIB treatment at 130 °C for 120 s. Struvite treatment with different inactivation technologies did not change its crystalline structure; however, it reduced functional group abundance. Therefore, further research on inactivation technologies is required to achieve better pathogen reduction efficiency in struvite to make it a biologically safe fertilizer for crop production.

Albendazole Release from Silica-Chitosan Nanospheres. In Vitro Study on Cervix Cancer Cell Lines

In this work, a pH-responsive drug-carrier based on chitosan-silica nanospheres was developed as a carrier for Albendazole (ABZ), a poorly water-soluble anthelmintic drug. Spherical silica nanoparticles were obtained by Stöber method and further etched to obtain mesoporous particles with sizes ranging from 350 to 400 nm. The specific BET area of nanoparticles increased from 15 m2/g to 150 m2/g for etched silica, which also exhibited a uniform pore size distribution. X-ray powder diffraction showed the presence of amorphous phase of silica and a low-intensity peak attributed to ABZ for the drug-loaded nanoparticles. A uniform layer of chitosan was obtained ranging from 10 to 15 nm in thickness due to the small concentration of chitosan used (0.45 mg of chitosan/mg of SiO2). The in vitro evaluation of hybrid nanoparticles was performed using four cervical cancer cell lines CaSki, HeLa, SiHa and C33A, showing a significant reduction in cell proliferation (>85%) after 72 h. Therefore, we confirmed the encapsulation and bioavailability of the drug, which was released in a controlled way, and the presence of chitosan delayed the release, which could be of interest for the development of prolonged release drug delivery systems.

Chitosan-Based Nanocomposite Polymeric Membranes for Water Purification-A Review

During the past few years, researchers have focused their attention on developing innovative nanocomposite polymeric membranes with applications in water purification. Natural and synthetic polymers were considered, and it was proven that chitosan-based materials presented important features. This review presents an overview regarding diverse materials used in developing innovative chitosan-based nanocomposite polymeric membranes for water purification. The first part of the review presents a detailed introduction about chitosan, highlighting the fact that is a biocompatible, biodegradable, low-cost, nontoxic biopolymer, having unique structure and interesting properties, and also antibacterial and antioxidant activities, reasons for using it in water treatment applications. To use chitosan-based materials for developing nanocomposite polymeric membranes for wastewater purification applications must enhance their performance by using different materials. In the second part of the review, the performance's features will be presented as a consequence of adding different nanoparticles, also showing the effect that those nanoparticles could bring on other polymeric membranes. Among these features, pollutant's retention and enhancing thermo-mechanical properties will be mentioned. The focus of the third section of the review will illustrate chitosan-based nanocomposite as polymeric membranes for water purification. Over the last few years, researchers have demonstrated that adsorbent nanocomposite polymeric membranes are powerful, important, and potential instruments in separation or removal of pollutants, such as heavy metals, dyes, and other toxic compounds presented in water systems. Lastly, we conclude this review with a summary of the most important applications of chitosan-based nanocomposite polymeric membranes and their perspectives in water purification.

Enhanced adsorptive composite foams for copper (II) removal utilising bio-renewable polyisoprene-functionalised carbon derived from coconut shell waste

A bio -renewable polyisoprene obtained from Hevea Brasiliensis was used to produce functionalised carbon composite foam as an adsorbent for heavy metal ions. Functionalised carbon materials (C-SO₃H, C-COOH, or C-NH₂) derived from coconut shell waste were prepared via a hydrothermal treatment. Scanning electron microscopy images showed that the functionalised carbon particles had spherical shapes with rough surfaces. X-ray photoelectron spectroscopy confirmed that the functional groups were successfully functionalised over the carbon surface. The foaming process allowed for the addition of carbon (up to seven parts per hundred of rubber) to the high ammonia natural rubber latex. The composite foams had open pore structures with good dispersion of the functionalised carbon. The foam performance on copper ion adsorption has been investigated with regard to their functional group and adsorption conditions. The carbon foams achieved maximum Cu(II) adsorption at 56.5 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{mg g}}_{\text{foam}}^{-1}$$\end{document}mg gfoam-1 for C-SO₃H, 55.7 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{mg g}}_{\text{foam}}^{-1}$$\end{document}mg gfoam-1 for C-COOH, and 41.9 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{mg g}}_{\text{foam}}^{-1}$$\end{document}mg gfoam-1 for C-NH₂, and the adsorption behaviour followed a pseudo-second order kinetics model.

An ecofriendly nanocomposite of bacterial cellulose and hydroxyapatite efficiently removes lead from water

An environmentally friendly nanocomposite adsorbent composed of two renewable biomaterials, bacterial cellulose (BC) nanofibrils and hydroxyapatite (HA) nanocrystals, was synthetized by an in situ wet chemical precipitation technique, using clam shell biowaste as feedstock. HA nanocrystals embedded in an ultrafine BC network were confirmed and characterized trough different instrumental techniques (SEM, FTIR, XRD, EDS, surface charge and BET analysis), describing its nanostructure, chemical composition and thermal stability. The adsorptive removal of lead ions by the nanocomposite was investigated through batch experiments conducted under different pH, contact times and Pb(II) initial concentrations, proving that the process was highly favorable according to the Langmuir isotherm model (monolayer adsorption) with chemisorption as the main mechanism and kinetic data obeying a nonlinear pseudo-second order kinetic model. The developed nanocomposite showed a strong removal capacity of Pb(II) both in batch experiments (192 mg/g) and packed-bed column systems (188 mg/g), placing this new nanocomposite among top-performing BC-based biomaterials for lead removal.

Evolution of adsorption process for manganese removal in water via agricultural waste adsorbents

Manganese has recently been a topic of interest among researchers, particularly when 1,752 million tonnes of manganese are expected to be produced by the steel industry in 2020. Manganese discharges from industrial effluents have increased manganese contamination in water sources. Its concentrations of more than 0.2 mg/L in the water sources could have negative impacts on human health and the aquatic ecosystem. Thereby, the available water treatment processes face challenges in effectively removing manganese at low cost. In response to these challenges, adsorption has emerged as one of the most practical water treatment processes for manganese removal. In particular, agricultural waste adsorbents received a lot of attention owing to their low cost and high efficiency (99%) in the removal of manganese. Therefore, this paper reviews the removal of manganese by adsorption process using agricultural waste adsorbents. The factors affecting the adsorption process, the mechanisms, and the performances of the adsorbents are elucidated in detail.

Phosphorus and nitrogen transformation in antibiotic mycelial residue derived hydrochar and activated pyrolyzed samples: Effect on Pb (II) immobilization

In this study, lincomycin residue (LR, a type of antibiotic mycelial residue) derived hydrochar samples (LR-HCs) were obtained from hydrothermal carbonization (HTC), and pyrolysis applied to these LR-HCs to produce activated pyrolyzed samples (LR-APs). Transformation of phosphorus (P) and nitrogen (N) species during HTC and pyrolysis was of primary interest and characterized by several techniques. Nitrogen content of dry LR was calculated by elemental analysis, being 7.91 wt. %, decreasing to 2.51 after HTC and 1.12 wt. % after concesutive HTC and pyrolysis. FT-IR analysis provided evidence for amine groups in LR samples. XPS analysis described N species (Pyridinic-N, Amine-N, Protein-N, Pyrrolic-N, and Quaternary-N) and P species (ortho-P/pyro-P and Ar-P) in LR samples, effectively. Sequential extraction showed that the HTC and pyrolysis changed the proportion of the P species from labile (P-NaHCO₃ and P-NaOH) to stable ones (P-residue). Utilization and suitability of as-prepared LR-HCs and LR-APs for heavy metal Pb (II) immobilization show promising results. To help understand immobilization process, kinetic (pseudo-1st-order and pseudo-2nd-order) and isotherm (Freundlich) models were tested and verified. Results confirmed that P and N species were transformed during HTC and pyrolysis and that these processes lead to an advantageous effect on Pb (II) removal from solution.

Strategy to design a smart photocleavable and pH sensitive chitosan based hydrogel through a novel crosslinker: a potential vehicle for controlled drug delivery

We report herein the synthesis of a novel photocleavable crosslinker, 4-formylphenyl 4-((4-formylphenoxy)methyl)-3-nitrobenzoate (CHO-ONB-CHO) and its joining with amine-based polysaccharides, viz. chitosan, resulting in the formation of a dual stimuli-responsive (ONB-chitosan) hydrogel having UV- and pH-responsive sites. The detailed mechanism for the formation of CHO-ONB-CHO and ONB-chitosan hydrogel is proposed. The (CHO-ONB-CHO) crosslinker was characterized using 1H-NMR, LCMS and UV-visible spectroscopy. The dual responsive hydrogel is characterized by FTIR, SEM, XRD, DSC and TGA. The crosslinked hydrogel displayed mechanical robustness with a storage modulus of about 1741 pa. The pH-responsiveness of the hydrogel was studied via equilibrium swelling studies in various pH media at 37 °C. The photocleavable behavior of the crosslinker was observed in the UV-absorption range of 310-340 nm and the hydrogel exhibited maximum swelling at pH 5.7. The higher swelling of the hydrogel in acidic conditions and its photo-responsiveness can be exploited for the controlled, temporal and spatial release of therapeutic drugs at any inflammatory areas with acidic environments. It was observed that the hydrogel exhibited higher drug release at pH 5.7 than at pH 7.4.

Corn stalk as starting material to prepare a novel adsorbent via SET-LRP and its adsorption performance for Pb(II) and Cu(II)

Corn stalk was used as the initial material to prepare a corn stalk matrix-g-polyacrylonitrile-based adsorbent. At first, the corn stalk was treated with potassium hydroxide and nitric acid to obtain the corn stalk-based cellulose (CS), and then the CS was modified by 2-bromoisobutyrylbromide (2-BiBBr) to prepare a macroinitiator. After that, polyacrylonitrile (PAN) was grafted onto the macroinitiator by single-electron transfer living radical polymerization (SET-LRP). A novel adsorbent AO CS-g-PAN was, therefore, obtained by introducing amidoxime groups onto the CS-g-PAN with hydroxylamine hydrochloride (NH2OH · HCl). FTIR, SEM and XPS were applied to characterize the structure of AO CS-g-PAN. The adsorbent was then employed to remove Pb(II) and Cu(II), and it exhibited a predominant adsorption performance on Pb(II) and Cu(II). The effect of parameters, such as temperature, adsorption time, pH and the initial concentration of metal ions on adsorption capacity, were examined in detail during its application. Results suggest that the maximum adsorption capacity of Pb(II) and Cu(II) was 231.84 mg g-1 and 94.72 mg g-1, and the corresponding removal efficiency was 72.03% and 63%, respectively. The pseudo-second order model was more suitable to depict the adsorption process. And the adsorption isotherm of Cu(II) accorded with the Langmuir model, while the Pb(II) conformed better to the Freundlich isotherm model.

A pH-sensitive delivery system based on N-succinyl chitosan-ZnO nanoparticles for improving antibacterial and anticancer activities of curcumin

Inherent selective cytotoxicity, antibacterial activity and unique physicochemical properties of ZnO nanostructures and chitosan (CS) make them promising candidates for drug delivery. In this study, ZnO nanoparticles functionalized by N-succinyl chitosan as a pH-sensitive delivery system were synthesized to enhance the therapeutic potential of curcumin (CUR). CS coated-ZnO nanoparticles were synthesized by a co-precipitation method in the presence of CS. Chemical modification of CS-ZnO particles was performed by succinic anhydride for introducing -COOH functional groups which were then activated using 1,1'‑carbonyldiimidazole for CUR conjugation. The spherical-like CUR-conjugated system (CUR-CS-ZnO) with the average particle size of 40 nm presented significantly enhanced water dispersibility versus free CUR. The experimental study of CUR release from the system showed a pH-sensitive release profile, which enabled drug delivery to tumors and infection sites. MTT and Annexin-V FITC/PI assays revealed the superior anticancer activity of CUR-CS-ZnO compared to free CUR against breast cancer cells (MDA-MB-231) by inducing the apoptotic response with no cytotoxic effects on HEK293 normal cells. Moreover, CUR conjugation to the system notably dropped the MIC (25 to 50-fold) and MBC values (10 to 40-fold) against S. aureus and E. coli. The features qualify the formulation for anticancer and antimicrobial applications in the future.

Conversion of phosphorus and nitrogen in lincomycin residue during microwave-assisted hydrothermal liquefaction and its application for Pb2+ removal

Treatment of antibiotic fermentative residue (AFR) produced from pharmaceutical industries and their application in the environment has been gaining researchers' interest. In this study, lincomycin residue (LMR, the type of AFR) was treated with microwave-assisted hydrothermal liquefaction (MW-HTL) in a temperature range 120-210 °C, transforming effect of phosphorus (P) and nitrogen (N) functional groups in LMR samples was characterized with elemental analysis, XRD, XPS, FT-IR, and P-extraction, and utilized LMR samples for Pb²⁺ removal from aqueous solutions. The temperature had a significant impact on P and N functional groups conversion justified by characterization techniques and also responsible for Pb²⁺ adsorption. LMR hydrochar produced at 210 °C was accounted highest Pb²⁺ adsorption capacity (57.4 mg g^-1), higher four folds than raw LMR (13.8 mg g^-1). To understand the mechanism and rate defining phase of adsorption equilibrium isotherm and kinetic models were applied systematically. Adsorption results of LMR and its derived hydrochar samples found connectivity with Langmuir and pseudo-first-order isotherm models. Adsorption mainly occurred as ion-exchange dependent on the substitution of metal ions (Pb²⁺) to Ca²⁺ ions present in P-materials, and surface adsorption dependent on surface functional groups of LMR samples. Better operation feasibility of MW-HTL treated LMR, elaboration of P and N conversion behavior and high sorption of Pb²⁺ ions could make LMR a frontrunner for heavy metals immobilization.

Encapsulated green magnetic nanoparticles for the removal of toxic Pb2+ and Cd2+ from water: Development, characterization and application

Current research is based on an innovative approach of the fabrication of encapsulated sustainable, green, phytogenic magnetic nanoparticles (PMNPs), to inhibit the generation of secondary pollutants (Iron/Fe^o) during water treatment applications. These novel bio-magnetic membrane capsules (BMMCs) were prepared using two-step titration gel crosslink method, with polyvinyl alcohol and sodium alginate matrix as the model encapsulating materials to eliminate potentially toxic metals (Pb²⁺ and Cd²⁺) from water. The development of BMMCs was characterized by FTIR, XRD, XPS, SEM, VSM, TGA and EDX techniques. The effects of various operating parameters, adsorbent dose, contact time, solution pH, temperature, initial concentration of metals cations and co-existing ions were studied. The hysteresis loops have illustrated an excellent super-paramagnetic nature, demonstrating the smooth encapsulation of PMNPs without losing their magnetic properties. The maximum monolayer adsorptive capacities estimated at pH 6.5 by the Langmuir isotherm model were 548 and 610.67 mg/g for Pb²⁺ and Cd²⁺, respectively. The novel BMMCs did not only control oxidation of PMNPs but also sustained the adsorptive removal over a wide range of pH (3-8), and the electrostatic interaction and ion-exchange were the core adsorption mechanisms. The BMMCs could easily be regenerated using 25% HNO₃ as an eluent for successful usage in seven repeated cycles. Therefore, the BMMCs as a material can be used as an excellent sorbent or composite material to remove toxic metals Pb²⁺ and Cd²⁺, showing strong potential for improving water and wastewater treatment technologies.

Removal of Pb(ii) and Cd(ii) from wastewater using arginine cross-linked chitosan-carboxymethyl cellulose beads as green adsorbent

A one pot approach has been explored to synthesize crosslinked beads from chitosan (CS) and carboxymethyl cellulose (CM) using arginine (ag) as a crosslinker. The synthesized beads were characterized by FTIR, SEM, EDX, XRD, TGA and XPS analysis. The results showed that CS and CM were crosslinked successfully and the obtained material (beads) was analyzed for adsorption of Cd(ii) and Pb(ii) by using batch adsorption experiments; parameters such as temperature, contact time, pH and initial ion concentration were studied. Different kinetic and thermodynamic models were used to check the best fit of the adsorption data. The results revealed that the kinetics data of the adsorption of Pb(ii) and Cd(ii) ions shows the best fit with the pseudo second order model whereas the thermodynamics data shows the best fit with the Langmuir isotherm with maximum adsorption capacities of 182.5 mg g-1 and 168.5 mg g-1 for Pb(ii) ions Cd(ii) ions, respectively. For the recovery and the regeneration after the one use of the beads, several adsorption-desorption cycles were carried out to check the reusability and recovery of both the metal ion and the adsorbent without the loss of maximum adsorption efficiency.

Facile One-Pot Synthesis of Sustainable Carboxymethyl Chitosan - Sewage Sludge Biochar for Effective Heavy Metal Chelation and Regeneration

In this paper, sewage sludge, a solid waste from wastewater treatment plant, which eagerly requires proper treatment was reused as solid support in the form of sewage sludge biochar, then modified with carboxymethyl chitosan to form a bio-adsorbent. Further, carboxymethyl chitosan coating on sewage sludge biochar improved carboxymethyl chitosan's stability in water. The prepared bio-adsorbent revealed a shorter equilibrium time (<60 min) for Pb(II) adsorption and a superior capacity of 594.17 mg g^-1 for Hg(II) adsorption, which are so far the best recorded performance achieved for chitosan based adsorbents. Additionally, the adsorbent was highly selective for heavy metal ions and it also presented a good stability and reusability for industrial applications. These outcomes demonstrate waste valorization through a green, facile and one-pot approach that turns the solid waste of sewage sludge into biochar adsorbent with propitious applications in the elimination of heavy metal ions from wastewater.