Detecting Pb2+ in aqueous environment and live cells by amphiphilic pillar[5]arene-assembled supramolecular sensor based on host-guest charge transfer mechanism

Water-soluble fluorescent chemosensors for lead ion are highly desirable in environmental detection and bioimagery. Based on a water-soluble pillar[5]arene WP5 and imidazolium terminal functionalized 2,2'-bibenzimidazole derivative BIHB, we report a host-guest charge transfer assembly BIHB-2WP5 for sensitive and selective detection of Pb2+ in pure aqueous media. As a result of its high electron-rich cavity, WP5 can bind electron-deficiency guest BIHB with various host/guest stoichiometry to easily tune the microtopography of assembly from nanoparticle to nanocube. In view of the good biocompatibility and sensitivity, the supramolecular assembly BIHB-2WP5 was used as a fluorescent probe for the detection of Pb2+ in living cells and a smartphone Pb2+ detection device was constructed for the in situ test.

A Study of Small Molecule-Based Rhodamine-Derived Chemosensors and their Implications in Environmental and Biological Systems from 2012 to 2021: Latest Advancement and Future Prospects

Rhodamine-based chemosensors have sparked considerable interest in recent years due to their remarkable photophysical properties, which include high absorption coefficients, exceptional quantum yields, improved photostability, and significant red shifts. This article presents an overview of the diverse fluorometric, and colorimetric sensors produced from rhodamine, as well as their applications in a wide range of fields. The ability of rhodamine-based chemosensors to detect a wide range of metal ions, including Hg+2, Al3+, Cr3+, Cu2+, Fe3+, Fe2+, Cd2+, Sn4+, Zn2+, and Pb2+, is one of their major advantages. Other applications of these sensors include dual analytes, multianalytes, and relay recognition of dual analytes. Rhodamine-based probes can also detect noble metal ions such as Au3+, Ag+, and Pt2+. They have been used to detect pH, biological species, reactive oxygen and nitrogen species, anions, and nerve agents in addition to metal ions. The probes have been engineered to undergo colorimetric or fluorometric changes upon binding to specific analytes, rendering them highly selective and sensitive by ring-opening via different mechanisms such as Photoinduced Electron Transfer (PET), Chelation Enhanced Fluorescence (CHEF), Intramolecular Charge Transfer (ICT), and Fluorescence Resonance Energy Transfer (FRET). For improved sensing performance, light-harvesting dendritic systems based on rhodamine conjugates has also been explored for enhanced sensing performance. These dendritic arrangements permit the incorporation of numerous rhodamine units, resulting in an improvement in signal amplification and sensitivity. The probes have been utilised extensively for imaging biological samples, including imaging of living cells, and for environmental research. Moreover, they have been combined into logic gates for the construction of molecular computing systems. The usage of rhodamine-based chemosensors has created significant potential in a range of disciplines, including biological and environmental sensing as well as logic gate applications. This study focuses on the work published between 2012 and 2021 and emphasises the enormous research and development potential of these probes.

Novel probe based on rhodamine B and quinoline as a naked-eye colorimetric probe for dual detection of nickel and hypochlorite ions

This work demonstrates the design and straightforward syntheses of several novel probe-based on rhodamine B and 2-mercaptoquinoline-3-carbaldehydes as a naked-eye colorimetric probe, indicating a sensitive and selective recognition towards nickel (II) with a limit of detection 0.30 μmol L-1 (0.02 mg L-1). Further, by employing the oxidation property of hypochlorite (OCl-), this novel probe parallelly has been deployed to detect hypochlorite in laboratory conditions with a limit of detection of 0.19 μmol mL-1 and in living cells. Regarded to negligible cell toxicity toward mammalian cells, this probe has the potential to determine these analytes in in-vivo investigation and foodstuff samples.

Development of ratiometric fluorescent probes based on peptides for sensing Pb2+ in aquatic environments and human serum

The detection of Pb²⁺ ions in aquatic environments and biofluid samples is crucial for assessment of human health. Herein, we synthesized two fluorescent probes (1 and 2) consisting of the peptide receptor for Pb²⁺ and a benzothiazolyl-cyanovinylene fluorophore that exhibited excimer-like emission when it aggregated. The peptide-based probes sensitively detected Pb²⁺ in purely aqueous solution (1% DMF) through ratiometric fluorescent response with a decrease in monomer emission at 520 nm and an increase in excimer emission at 570 nm. Specially, probe 2 showed remarkable detection features such as high selectivity for Pb²⁺over 15 metal ions, high binding affinity (K_d = 5.83 × 10^-7 M) for Pb²⁺, significant emission intensity changes, low detection limit (3.8 nM) of Pb²⁺, high water solubility, and visible light excitation (450 nm). Probe 2 was successfully used to quantify nanomolar concentration (0 ∼ 800 nM) of Pb²⁺ in real water samples (ground water and tap water). Specially, 2 was successfully applied for the quantification of Pb²⁺ in human serum by combination of microwave-assisted human serum digestion and filtration of digested serum by anion exchange cartridge. We clearly investigated the binding mode of 2 with Pb²⁺ using ¹H NMR, IR spectroscopy, pH titration, confocal microscopy, and size analysis. The peptide-based fluorescent probe might have great application potential for sensing Pb²⁺ in aquatic environments and biofluid samples.

Silica nanoparticle-modified paper strip-based new rhodamine B chemosensor for highly selective detection of copper ions in drinking water

A new rhodamine B derivative (RDB) was synthesized and utilized for the colorimetric detection of copper ions (Cu²⁺). This chemosensor utilized a paper strip as a support and a smartphone as a detector for on-site quantitative detection of Cu²⁺ in water samples. Silica nanoparticles (SiNPs) were investigated as the modifier nanoparticles to achieve uniform color on the paper strip and showed a color response 1.9-fold higher than the one without SiNPs. The RDB chemosensor-based paper strip provided high selectivity toward Cu²⁺ with a detection limit of 0.7 mg/L, and the working concentrations for Cu²⁺ ranged from 1 to 17 mg/L. Parallel analyses of eight drinking water samples were conducted by inductively coupled plasma optical emission spectroscopy. The results were in good agreement, indicating the practical reliability of the established method with a short assay time and high selectivity. These indicate its great potential for on-site detection of Cu²⁺.

Ratiometric Fluorescence Sensing System for Lead Ions Based on Self-Assembly of Bioprobes Triggered by Specific Pb2+-Peptide Interactions

Lead is one of the most toxic substances. However, there are few ratiometric fluorescent probes for sensing Pb2+ in aqueous solution as well as living cells because specific ligands for Pb2+ ions have not been well characterized. Considering the interactions between Pb2+ and peptides, we developed ratiometric fluorescent probes for Pb2+ based on the peptide receptor in two steps. First, we synthesized fluorescent probes (1-3) based on the tetrapeptide receptor (ECEE-NH2) containing hard and soft ligands by conjugation with diverse fluorophores that showed excimer emission when they aggregated. After investigation of fluorescent responses to metal ions, benzothiazolyl-cyanovinylene was evaluated as an appropriate fluorophore for ratiometric detection of Pb2+. Next, we modified the peptide receptor to decrease the number of hard ligands and/or to replace Cys with disulfide bond and methylated Cys for improving selectivity and cell permeability. From this process, we developed two fluorescent probes (3 and 8) among the probes (1-8) that exhibited remarkable ratiometric sensing properties for Pb2+ including high water solubility (≤2% DMF), visible light excitation, high sensitivity, selectivity for Pb2+, low detection limits (<10 nM), and fast response (<6 min). The binding mode study revealed that specific Pb2+-peptide interactions of the probes caused nanosized aggregates in which the fluorophores of the probes came close each other, exhibiting excimer emission. In particular, 8 based on tetrapeptide bearing a disulfide bond and two carboxyl groups with a good permeability successfully quantified intracellular uptake of Pb2+ in live cells through ratiometric fluorescent signals. The ratiometric sensing system based on specific metal-peptide interactions and excimer emission process could provide a valuable tool to quantify Pb2+ in live cells and pure aqueous solutions.

A new Fe3+-selective, sensitive, and dual-channel turn-on probe based on rhodamine carrying thiophenecarboxaldehyde: Smartphone application and imaging in living cells

A new dual-channel probe based on rhodamine B derivative (MSB) was successfully designed, synthesized, characterized by Nuclear Magnetic Resonance (NMR) Spectroscopy, Fourier Transform Infrared Spectrophotometer (FTIR), Matrix Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry (MALDI-TOF MS), X-ray Photoelectron Spectroscopy (XPS), and Single Crystal X-rayDiffraction, and the sensing abilities toward Fe³⁺ cation have been demonstrated and the probe was successfully utilized for fluorescence imaging of Fe³⁺ in living cells. The probe demonstrated quite fast, sensitive, and selective response to Fe³⁺ by causing an extreme enhancement in UV-vis and fluorescence spectroscopy techniques in the buffered aqueous media which makes MSB a dual-channel probe. While the color of MSB solution was initially light yellow, it turned pink in the presence of Fe³⁺, which provided highly selective naked-eye determination among several ions as alkaline, alkaline-earth, and transition metal ions. After that, the probe was easily applied to paper strips and real samples such as drinking waters and supplementary iron tablets for sensing Fe³⁺ in an aqueous solution. The detection limit (LOD) and the response time of the probe were determined as 4.85x10^-9 M and 4 min, respectively, which are quite lower compared with other rhodamine based Fe³⁺ sensors in the literature. According to Job's plot, ¹H NMR titration, MALDI-TOF MS, XPS, and DFT study techniques, the complexation ratio between MSB and Fe³⁺ was found as 1:1. Moreover, the spectral response was reversible with alternately addition of Fe³⁺ or Na₂EDTA to the MSB solution. In addition, fluorescence imaging in NIH/3T3 mouse fibroblast cells and studies in real samples with a quite high recovery rate exhibited that the probe is qualified for detection of Fe³⁺ ion with multiple practical usages.

Coumarin based thiosemicarbazones as effective chemosensors for fluoride ion detection

Anion sensing have attained immense importance as these charged ions are prevailing in agriculture industry and in heavy industry and therefore in the environment around us, chemosensors are commencing to claim several applications as their role is being better perceived day by day. In the current study, coumarin based thiosemicarbazone R-1 (phenyl moiety) and R-2 (benzyl moiety) were synthesized. It was observed that there were variations in the sensing patterns of compound bearing benzyl group, as compared to the simple phenyl group bearing receptor. Different techniques were used to confirm the interaction of coumarin based receptors with anions. These techniques included naked-eye test, UV-visible, 1H NMR, and fluorescence spectroscopic techniques. The synthesized receptors showed selectivity for fluoride ions. Benesi-Hildebrand equation was employed for determining the detection limits and binding constants values. The synthesized receptors were employed as efficient chemosensors in real life samples and satisfactory results were obtained.

Highly selective and sensitive fluorescent probe possessing AIEE and ICT properties for rapid detection of Pb2+ in aqueous medium and its applications in living cells

In this paper, a novel rapid, highly selective and sensitive Pb²⁺ fluorescent probe (E)-N'-((2-(4'-(diphenylamino)-[1,1'-biphenyl]-4-yl)-2H-1,2,3-triazol-4-yl)methylene) (DBTBH) was synthesized. The probe DBTBH not only exhibited more excellent selectivity and sensitivity to Pb²⁺ detection compared with other analytes (include metal ions and anions) in H₂ O:THF solution (v:v = 9:1, 10 mM Tris-HCl, 1 mM KI, pH 7.4), but also had excellent optical properties such as aggregation-induced emission enhancement (AIEE) and intramolecular charge transfer (ICT). Detection limit of the probe DBTBH towards Pb²⁺ was 4.49 × 10^-8  M. The possible mechanism was verified by ¹ H NMR titration and HR-MS. Furthermore, the successful detection of Pb²⁺ by DBTBH in real water samples and HeLa cells indicated that DBTBH has great potential for selective recognition of Pb²⁺ in the natural environment and biological systems. These findings will provide a promising new idea for designing better Pb²⁺ fluorescent probes in the future.

An insight of nanogels as novel drug delivery system with potential hybrid nanogel applications

Nanogels are cross-linked, nano-sized hydrogels with dimensions ranging from 20 to 200 nm. Nanogel-based nanoplatforms have proven to be an excellent choice for pharmaceutical formulations. Nanosystems have properties that are very useful in polymeric drug delivery applications, and their particular strength is that they have these nanosystemic properties and can thus merge with polymeric materials. Drug-carrier size is designed to be nano-sized in order to maintain optimal stability, resulting in more surface area and interior space. This also allows for a prolonged period of time for loaded pharmaceuticals to circulate. They can be classified by stimuli responsive or non-responsive behavior and type of linkages present in the network chains of gel structure. Nanogel can be synthesized by Photolithographic, modified pullulan, emulsion polymerization reverse microemulsion polymerization inverse miniemulsion polymerization and free radical crosslinking polymerization technique. Hybrid nanogels are different from conventional polymer nanoparticles often employed for drug administration. They can encapsulate bioactive medicines and regulate the release of such medications over time and in particular areas. The hybrid nanogels used to create a specific form of the hybrid, especially one geared towards increasing targeted drug delivery, enhance the effectiveness of ailment treatments, but perhaps the introduction of a multifunctional nanogel-based drug delivery system.

Amino Appended Coumarin Composites for Pb2+ Capturing in Aqueous Medium

The C1-C3 receptors were synthesized by using coumarin and amines viz., 1-butylpiperazine (1), cis-myrtanylamine (2), and 3-methyldiphenyl amine (3) at room temperature without using harsh conditions. All the probes show beautiful and strong binding with Pb²⁺ ions among all the tested essential elements of human body. The binding is clearly seen and confirmed in UV-visible, NMR and HPLC studies. Also, all the substituted amines (1-3) are well known bioactives viz., piperazine as anthelmintic, cis-myrtanyl use for cannabinoid receptor (CB2) antagonists, 3-methyldiphenyl is used in probes for selective detection of explosive nitroaromatic compounds further increases their sensitivity for use as Pb²⁺ sensor. As they are already well in use for research on human body metabolomics their future introduction as sensors in the human body for lead toxicity is highly favourable.

Advances in the Functional Nucleic Acid Biosensors for Detection of Lead Ions

Lead ions (Pb²⁺) are destructive to the natural environment and public health, so the efficient detection of Pb²⁺ is particularly important. Although the instrumental analysis methods have high accuracy, they require high cost and precise operation, which limits their wide application. Therefore, many strategies have been extensively studied for detecting Pb²⁺ by biosensors. Functional nucleic acids have become an efficient tool in this field. This review focuses on the recent biosensors of detecting Pb²⁺ based on functional nucleic acids from 2010 to 2020, in which DNAzyme, DNA G-quadruplex and aptamer will be introduced. The biosensors are divided into three categories that colorimetric, fluorometric and electrochemical biosensors according to the different reported signals. The action mechanism and detection effect of each biosensor are explained. Finally, the present situation of nucleic acid biosensor for the detection of Pb²⁺ is summarized and the future research direction is prospected.

A Novel Diarylethene-rhodamine Unit Based Chemosensor for Fluorimetric and Colorimetric Detection of Hg2

A novel fluorimetric and colorimetric chemosensor (1O) was synthesized with diarylethene-rhodamine unit and characterized by ESI-MS, ¹H NMR, and ¹³C NMR. The chemosensor can selectively recognize extremely low concentrations of Hg²⁺ over a variety of metal ions with remarkable colorimetric and fluorescent responses. The colorimetric and fluorescent changes were ascribed the reaction between 1O and Hg²⁺ destructed the rhodamine hydrazide into open-ring form which was proved by mass spectrometry and nuclear magnetic titration analyses. The detection limits of the UV absorption and fluorescence methods for Hg²⁺ were found to be 0.708 μM and 24.6 nM, respectively. Moreover, the chemosensor exhibited excellent photochromism and outstanding fatigue resistance property under alternating UV and visible light irradiation. The application potential of the chemosensor was demonstrated with the qualitative detection of Hg²⁺ in real water samples.

Studies of the labile lead pool using a rhodamine-based fluorescent probe

Lead is a heavy metal which has long been known to have toxic effects on the body. However, much remains to be learnt about the labile lead pool and cellular uptake of lead. We report here RPb1 that undergoes a 100-fold increase in fluorescence emission in the presence of Pb2+, and which can be applied to study the labile lead pool within cells. We demonstrate the capacity of RPb1 for investigating labile lead pool in DLD-1 cells and changes in labile lead during differentiation of K562 cells.

Variation of Stokes Shift and Peak Wavelength Shift as a Sensing Probe for Detection of Lead in Water Using Laser Induced Fluorescence Resonance Energy Transfer

Water contamination through the dissolved toxic heavy metal ions is becoming a serious issue seeking the worldwide attention of the researchers. The tap water used for drinking is primarily exposed to the household plumbing system and may dissolve toxic lead metal through pipes, soldered joints and that may cause a number of diseases in children, adults and pregnant women. Thus detecting lead is getting utmost importance among the researchers. Present work explains a method of detecting trace concentration of lead in water using laser induced fluorescence resonance energy transfer (LIFRET). The fluorescence resonance energy transfer (FRET) is observed between 1, 8- naphthalimide as donor and rhodamine-B as an acceptor by exciting it with a laser radiation of 405 nm. With the addition of the lead contained water in pure solution of the FRET pair the emission peak wavelength shifts from 630.27 nm of its value for pure solution. The amount of stoke shift decreases with increase in lead concentration with a gradual increase in intensity of the fluorescence spectra. Based on variation of stoke shift and peak wavelength shift of FRET spectra a novel and specific method is described for the detection of lead up to its maximum permissible limit of 0.00001 g l-1 set by the world health organization(WHO). The method described is relatively cost effective, handy and may have reasonably effective in situ measurement for detecting lead in the contaminated areas.

A Visual and Ratiometric Chemosensor Using Thiophene Functionalized Hydrazone for the Selective Sensing of Pb2+ and F- Ions

Herein, a simple, efficient ratiometric chemosensor was reported for the selective sensing of Pb²⁺ and F^- ions using thiophene functionalized hydrazone as a chemical probe. Hydrazone moiety was developed by utilizing thiophene/naphthalene as a platform for the particular recognition of cation and anion. The structures of the precursor (Z)-(1-(5-bromothiophen-2-yl)ethylidene)hydrazine (ABTH) and the final probe 1-((Z)-(((Z)-1-(5-bromothiophen-2-yl)ethylidene)hydrazono)methyl)naphthalen-2-ol (NAPABTH) were confirmed by ¹H, ¹³C-NMR and LC-MS spectroscopic methods. The interaction of NAPABTH with Pb²⁺ and F^- ions was visually observed by the formation of pink and dark yellow solutions, respectively. The detection limits were found to be very low for Pb²⁺ as 1.06 ppm and for F^- ions as 3.72 nM. This visual detection of Pb²⁺/F^- ions with satisfactory outcomes obtained from UV-Vis titrations. The sensing mechanistic pathways and stoichiometric ratios were obtained from DFT and Job's plot, respectively. The observed results are highly promising as highly selective chemosensor with lower detection limits for Pb²⁺ and F^- ions. This strategy could exhibit tremendous applications for the selective sensing of heavy metal cations with rapid sensitivity for the design of new devices.

Fabrication of Colorimetric Textile Sensor Based on Rhodamine Dye for Acidic Gas Detection

For the immediate detection of gaseous strong acids, it is advantageous to employ colorimetric textile sensors based on halochromic dyes. Thus, a rhodamine dye with superior pH sensitivity and high thermal stability was synthesized and incorporated in nylon 6 and polyester fabrics to fabricate textile sensors through dyeing and printing methods. The spectral properties and solubility of the dye were examined; sensitivity to acidic gas as well as durability and reversibility of the fabricated textile sensors were investigated. Both dyed and printed sensors exhibited a high reaction rate and distinctive color change under the acidic condition owing to the high pH sensitivity of the dye. In addition, both sensors have outstanding durability and reversibility after washing and drying.

Sequential Fluorescence Recognition of Molybdenum(VI), Arsenite, and Phosphate Ions in a Ratiometric Manner: A Facile Approach for Discrimination of AsO2 - and H2PO4. ACS OMEGA 2019;4:10877-10890. [PMID: 31460185 PMCID: PMC6648501 DOI: 10.1021/acsomega.9b00377]

An amide-based smart probe (L) is explored for nanomolar detection of Mo(VI) ion in a ratiometric manner, involving hydrogen-bond-assisted chelation-enhanced fluorescence process through inhibition of photoinduced electron transfer process. The recognition of Mo(VI) is associated with a 17-fold fluorescence enhancement and confirmed by single-crystal X-ray diffraction of the resulting Mo(VI) complex (M1). Further, M1 selectively recognizes arsenite through green emission of their adduct (C1) with an 81-fold fluorescence enhancement. Interestingly, dihydrogen phosphate causes dissociation of C1 back to free L having weak fluorescence. The methods are fast, highly selective, and allow their bare eye visualization at physiological pH. All of the interactions have been substantiated by time-dependent density functional theory calculations to rationalize their spectroscopic properties. The corresponding lowest detection limits are 1.5 × 10-8 M for Mo(VI), 1.2 × 10-10 M for AsO2 -, and 3.2 × 10-6 M for H2PO4 -, whereas the respective association constants are 4.21 × 105 M-1 for Mo(VI), 6.49 × 104 M-1 for AsO2 -, and 2.11 × 105 M-1 for H2PO4 -. The L is useful for efficient enrichment of Mo(VI) from aqueous solution, while M1 efficiently removes AsO2 - from environmental samples by solid-phase extraction.

A coumarin based fluorescent probe for rapidly distinguishing of hypochlorite and copper (II) ion in organisms

A dual-functional fluorescent probe based on coumarin fluorophore for monitoring ClO^- and Cu²⁺ was synthesized and characterized. The identification mechanisms for ClO^- and Cu²⁺ induced different colorimetric and ratiometric changes. ClO^- caused a colorimetric change from yellow to colorless and 120 nm blue-shifted emission spectra from red to blue. Besides, Cu²⁺ induced a remarkable fluorescence quenching behavior and 36 nm blue-shifted absorption spectra accompanied by the color change from yellow to luminous yellow. As expected, Probe 1 displayed excellent selectivity and sensitivity for detecting ClO^- and Cu²⁺ over other competing ions in their respective systems. The limits of detection for ClO^- and Cu²⁺ were 24.62 nM and 0.39 nM, respectively. The recognition mechanisms were proved by ¹H NMR, mass spectrum and theoretical calculations. More importantly, the reversibility of Cu²⁺ could be applicable to rapid quantification for ClO^-/Cu²⁺. Thus, the strategy for sensing ClO^-/Cu²⁺ was carried out, which revealed broad applications of Probe 1 in multiple actual water and biology.

One-pot synthesis of dual carbon dots using only an N and S co-existed dopant for fluorescence detection of Ag. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2019;208:162-171. [PMID: 30312843 DOI: 10.1016/j.saa.2018.10.004]

Luminescent carbon-based nanoparticles, named often as carbon dots (CDs), were synthesized from citric acid (CA) and guanidine thiocyanate (GITC) via an N and S co-doped hydrothermal procedure. In the present structure characterization, N and S elements could be sufficiently doped by means of the heteroatom or the functional groups bonded on the surface of CDs. The as-prepared CDs solution showed blue color fluorescence under ultraviolet excitation, yet the PL spectra exhibited a repetitive emission process from excitation-independent to excitation-dependent. In view of the triexponential feature of fluorescence lifetimes of CDs, one possibility was proposed to be co-existence of two types of CDs with different surface states. Additionally, the as-prepared CDs were used as a sensing probe for the detection of Ag⁺ taking into consideration of the possible interactions between Ag⁺ and various fluorophores attached to the CD surface. As expected, the changes of fluorescence intensities were linearly proportional to the different concentration ranges of Ag⁺, which suggests the complex nature of the quenching mechanism. And for the first time, the SCN group was found to accelerate the quenching of CDs towards Ag⁺, promising a new approach for efficient detection of Ag⁺ for the application in industrial pollutants.

Fluorescent Sensors for the Detection of Heavy Metal Ions in Aqueous Media

Due to the risks that water contamination implies for human health and environmental protection, monitoring the quality of water is a major concern of the present era. Therefore, in recent years several efforts have been dedicated to the development of fast, sensitive, and selective sensors for the detection of heavy metal ions. In particular, fluorescent sensors have gained in popularity due to their interesting features, such as high specificity, sensitivity, and reversibility. Thus, this review is devoted to the recent advances in fluorescent sensors for the monitoring of these contaminants, and special focus is placed on those devices based on fluorescent aptasensors, quantum dots, and organic dyes.

Triazole-based novel bis Schiff base colorimetric and fluorescent turn-on dual chemosensor for Cu2+ and Pb2+: application to living cell imaging and molecular logic gates

A triazole-based novel bis Schiff base colorimetric and fluorescent chemosensor (L) has been designed, synthesized and characterized by elemental analysis, ¹H-NMR, ESI-MS, FTIR spectra and DFT studies. The receptor L showed selective and sensitive colorimetric sensing ability for Cu²⁺ and Pb²⁺ ions by changing color from colorless to yellow and light yellow respectively in CH₃OH–tris-buffer (1 : 1, v/v). However, it displayed strong fluorescence enhancement upon the addition of both Cu²⁺ and Pb²⁺ ions, attributed to the blocking of PET. The fluorometric detection limits for Cu²⁺ and Pb²⁺ were found to be 12 × 10⁻⁷ M and 9 × 10⁻⁷ M and the colorimetric detection limits were 3.7 × 10⁻⁶ M and 1.2 × 10⁻⁶ M respectively; which are far below the permissible concentration in drinking water determined by WHO. Moreover, it was found that chemosensor L worked as a reversible fluorescence probe towards Cu²⁺ and Pb²⁺ ions by the accumulation of S²⁻ and EDTA respectively. Based on the physicochemical and analytical methods like ESI-mass spectrometry, Job plot, FT-IR, ¹H-NMR spectra and DFT studies the detection mechanism may be explained as metal coordination, photoinduced electron transfer (PET) as well as an internal charge transfer (ICT) process. The sensor could work in a pH span of 4.0–12.0. The chemosensor L shows its application potential in the detection of Cu²⁺ and Pb²⁺ in real samples, living cells and building of molecular logic gate.

A novel triazole-based bis Schiff base colorimetric and fluorescent chemosensor (L) has been designed, synthesized and characterized. The chemo-sensor L shows its application potential in the detection of Cu²⁺ and Pb²⁺ in living cells and building molecular logic gate.

A selective chemosensor and fluorescence probe for relay recognition of cations and fluoride ions in aqueous media with logic gate function

Cation to anion relay recognition was studied for the first time with sequential specificity (Cu²⁺ → F^- or Co²⁺ → F^-) using a fluorescence "ON-OFF-ON" mechanism. L₁ is a receptor with high selectivity for F^-, Cu²⁺ and Co²⁺ ions in the solution of DMSO/H₂O with a 9:1 vol ratio. Absorption and fluorescence spectra were used to investigate the sensing process. Fluorescent emission intensity of L₁ at 324 is quenched (switch-Off) after the addition of Cu²⁺ and Co²⁺. Surprisingly, complex L₁ + Cu²⁺ or L₁ + Co²⁺ is restored with addition of F^- into the compound (switch-On). Consequently, implication (from emission) and inhibit (from absorption) logic gates are constructed at molecular level. The gates operate in fluorescence and absorption modes when Cu²⁺ and F^- or Co²⁺ and F^- are used as input materials and the fluorescence intensity signal as outputs. Based on reversible and reproducible system, a sequential memory unit with integrated ''Writing-Reading-Erasing-Reading'' behavior, is developed.

Supramolecularly Assembled Ratiometric Fluorescent Sensory Nanosystem for "Traffic Light"-Type Lead Ion or pH Sensing

The combination of functional nucleic acids and nanomaterials enables the continuous development of hybrid nanosystems that have found wide applications including chemo/biosensing. Herein, we report the supramolecular assembly of a "sesame biscuit"-like superstructural nanosystem based on aptamer, quantum dot (QD), and graphene oxide (GO), and its diverse applications in Pb²⁺ and pH sensing. The nanosystem was assembled via adsorbing silica-encapsulated green-emitting QD onto the edge of GO by ionic interaction, followed by absorbing aptamer-modified red-emitting QD onto the GO surface via the π-stacking interaction. The nanosystem showed the characteristic of the nonquenched green fluorescence due to silica encapsulation and quenched red fluorescence owing to nanomaterial surface energy transfer. The nanosystem responded to Pb²⁺/pH in ratiometric fluorescence: the red fluorescence varied upon analyte-driven conformational changes of the aptamer, whereas the green one remained constant. Under optimized conditions, the nanosystem was demonstrated to be capable of quantifying Pb²⁺ with a detection limit of 11.7 pM, as well as pH with a sensing resolution of 0.1 pH unit. More importantly, the ratiometric nanosystem facilitated visualization of analytes in a distinct "traffic light" manner, which was exemplified by semiquantification of exogenous Pb²⁺ in living cells. To demonstrate practicality, fluorescent test strips were fabricated by immobilizing the nanosystem on paper. The fluorescent test strips displayed traffic light-type fluorescence color changes, with the capacity for on-site, naked-eye detection of Pb²⁺ in real samples, as well as point-of-care pH testing in routine urinalysis.

An aqueous fluorescent sensor for Pb2+ based on phenothiazine-polyamide

A sensitive and selective fluorescent sensor for Pb²⁺ ion based on phenothiazine-polyamide was built (named sensor PP). Due to introducing of four diethanolamine groups to polyamide, this sensor was totally water soluble. PP could detect Pb²⁺ ion within 1 min in the presence of other metal ions in aqueous solution, the detect limit was 9.11 × 10^-8 M.

Novel acridine-based thiosemicarbazones as 'turn-on' chemosensors for selective recognition of fluoride anion: a spectroscopic and theoretical study

New thiosemicarbazide-linked acridines 3a-c were prepared and investigated as chemosensors for the detection of biologically and environmentally important anions. The compounds 3a-c were found selective for fluoride (F-) with no affinity for other anions, i.e. -OAc, Br-, I-, HSO4-, SO42-, PO43-, ClO3-, ClO4-, CN- and SCN-. Further, upon the gradual addition of a fluoride anion (F-) source (tetrabutylammonium fluoride), a well-defined change in colour of the solution of probes 3a-c was observed. The anion-sensing process was studied in detail via UV-visible absorption, fluorescence and 1H-NMR experiments. Moreover, during the synthesis of acridine probes 3a-c nickel fluoride (NiF2), a rarely explored transition metal fluoride salt, was used as the catalyst. Theoretical studies via density functional theory were also carried out to further investigate the sensing and anion (F-) selectivity pattern of these probes.

A near-infrared fluorescent probe for selective and quantitative detection of fluoride ions based on Si-Rhodamine

A highly selective fluorescent probe (SiROPS) based on Si-rhodamine (SiR) towards F^- was investigated. SiROPS can realize the NIR detection of F^- because of the long fluorescent wavelength (λ_ex = 650 nm, λ_em = 669 nm). The near-IR optical and the ratiometric fluorescence type signaling were realized by employing fluoride-selective cleavage of the latent thiophosphinated probe in mixed aqueous media. The cleavage of F^- to the ortho positions of dimethylphosphinothionyl group in the meso aryl involves the suppression of internal rotation upon phosphorylation of a reactive phenolate and the activating rotation of o-OH, which resulting in a large fluorescence "Turn-Off" response. The detection limit of the probe to F^- was 48 nM in the dynamic range of 0.5 μM-20 μM. In addition, the proposed probe has been used to detect F^- in water samples and toothpaste samples with satisfying results.

Fluorescent sensor based models for the detection of environmentally-related toxic heavy metals

The quest for industrial and biotechnological revolution has been contributed in increasing environmental contamination issues, worldwide. The controlled or uncontrolled release of hazardous pollutants from various industrial sectors is one of the key problems facing humanity. Among them, adverse influences of lead, cadmium, and mercury on human health are well known to cause many disorders like reproductive, neurological, endocrine system, and cardiovascular, etc. Besides their presence at lower concentrations, most of these toxic heavy metals are posing noteworthy toxicological concerns. In this context, notable efforts from various regulatory authorities, the increase in the concentration of these toxic heavy metals in the environment is of serious concern, so real-time monitoring is urgently required. This necessitates the exploration for novel and efficient probes for recognition of these toxic agents. Among various methodologies adopted for tailoring such probes, generally the methodologies, in which changes associated with spectral properties, are preferred for the deceptive ease in the recognition process. Accordingly, a promising modality has emerged in the form of radiometric and colorimetric monitoring of these toxic agents. Herein, we review fluorescent sensor based models and their potentialities to address the detection fate of hazardous pollutants for a cleaner environment. Second, recent advances regarding small molecule and rhodamine-based fluorescent sensors, radiometric and colorimetric probes are discussed. The information is also given on the photoinduced electron transfer (PET) mechanism, chelation enhancement fluorescence (CHEF) effect and spirocyclic ring opening mechanism.

A highly sensitive fluorescent probe for bioimaging zinc ion in living cells and zebrafish models

A simple OFF–ON fluorescent probe was prepared and successfully applied for bioimaging Zn²⁺ in living systems.

Use of rhodamine-allyl Schiff base in chemodosimetric processes for total palladium estimation and application in live cell imaging

An allyl-rhodamine Schiff base shows excellent palladium sensitivity (LOD, 95 nM) irrespective of Pd(0,ii,iv) and practical applicability is judged in living cells of RAW 264.7 (macrophage) cells.

Rhodamine–benzothiazole conjugate as an efficient multimodal sensor for Hg2+ ions and its application to imaging in living cells

A rhodamine B dye bearing a benzothiazole conjugate is designed and synthesized, it shows a highly selective and sensitive naked-eye color change and turn-on fluorescence response to Hg²⁺ ions.

A highly sensitive and selective chemosensor for Pb2+ based on quinoline–coumarin

In this study, a highly sensitive and selective fluorescent chemosensor, ethyl(E)-2-((2-((2-(7-(diethylamino)-2-oxo-2H-chromene-3-carbonyl)hydrazono)methyl)quinolin-8-yl)oxy)acetate (1), was synthesized and characterized by ¹H NMR, ¹³C NMR and ESI-MS. Sensor 1 showed an “on–off” fluorescence response to Pb²⁺ with a 1 : 1 binding stoichiometry in CH₃CN/HEPES buffer medium (9 : 1 v/v). The detection limit of sensor 1 to Pb²⁺ was determined to be 0.5 μM, and the stable pH range for Pb²⁺ detection was from 4 to 8.

A highly sensitive and selective fluorescent chemosensor 1 was synthesized and used for naked eye detection of Pb²⁺.

A highly sensitive turn-on fluorescent chemosensor for recognition of Zn2+ and Hg2+ and applications

A fluorescence probe has been designed and synthesized, and applied with a combined theoretical and experimental study. Research suggests that the probe can be used to sense Zn²⁺ and Hg²⁺ through selective turn-on fluorescence responses in the aqueous HEPES buffer (0.05M, pH=7.4). The limit of detection (LOD) were determined as 1.46×10^-7M (Zn²⁺) and 2.50×10^-7M (Hg²⁺). Moreover, based on DFT, the geometry optimizations of probe 1, [1-Hg²⁺] complex and [1-Zn²⁺] complex were carried out using the Gaussian 09 program, in which the B3LYP function was used. The electronic properties of free probe 1 and the metal complexes were studied based on the Natural Bond Orbital (NBO) analyses. The probe 1 has also been successfully applied to detection of Zn²⁺ and Hg²⁺ in living cells.

"Turn-on" fluorescent probe detection of Ca2+ ions and applications to bioimaging

Ca²⁺ is intracellular divalent cation with the largest concentration variations and involved in many biological phenomena and often acted as a second messenger in signaling pathway. Therefore, the development of probes for specific Ca²⁺ detection is of great importance. Herein, a novel turn-on fluorescent probe for the detection of Ca²⁺ in MeCN-aqueous medium was designed and synthesized. The probe displayed responses to Ca²⁺ with a fluorescence enhancement at 525nm, accompanying with a distinct fluorescence change from nearly colorless to bright yellow-green. Besides, the probe exhibited a rapid signal response time (within 25s), a good linearity range and a lower detection limit (2.70×10^-7M). In addition, the ability of the probe to detect Ca²⁺ in living cells (HeLa cells) via an enhancement of the fluorescence has also been demonstrated.