Fabrication of soy protein-polyphenol covalent complex nanoparticles with improved wettability to stabilize high-oil-phase curcumin emulsions

BACKGROUND

Recent studies have shown that the wettability of protein-based emulsifiers is critical for emulsion stability. However, few studies have been conducted to investigate the effects of varying epigallocatechin gallate (EGCG) concentrations on the wettability of protein-based emulsifiers. Additionally, limited studies have examined the effectiveness of soy protein-EGCG covalent complex nanoparticles with improved wettability as emulsifiers for stabilizing high-oil-phase (≥ 30%) curcumin emulsions.

RESULTS

Soy protein isolate (SPI)-EGCG complex nanoparticles (SPIEn) with improved wettability were fabricated to stabilize high-oil-phase curcumin emulsions. The results showed that EGCG forms covalent bonds with SPI, which changes its secondary structure, enhances its surface charge, and improves its wettability. Moreover, SPIEn with 2.0 g L -1 EGCG (SPIEn-2.0) exhibited a better three-phase contact angle (56.8 ± 0.3o) and zeta potential (-27 mV) than SPI. SPIEn-2.0 also facilitated the development of curcumin emulsion gels at an oil volume fraction of 0.5. Specifically, the enhanced network between droplets as a result of the packing effects and SPIEn-2.0 with inherent antioxidant function was more effective at inhibiting curcumin degradation during long-term storage and ultraviolet light exposure.

CONCLUSION

The results of the present study indicate that SPIEn with 2.0 g L -1 EGCG (SPIEn-2.0) comprises the optimum conditions for fabricating emulsifiers with improved wettability. Additionally, SPIEn-0.2 can improve the physicochemical stability of high-oil-phase curcumin emulsions, suggesting a novel strategy to design and fabricate high-oil-phase emulsion for encapsulating bioactive compounds. © 2024 Society of Chemical Industry.

Effects of polysaccharides on colonic targeting and colonic fermentation of ovalbumin-ferulic acid based emulsion

Rutin is a polyphenol with beneficial pharmacological properties. However, its bioavailability is often compromised due to low solubility and poor stability. Encapsulation technologies, such as emulsion systems, have been proven to be promising delivery vehicles for enhancing the bioavailability of bioactive compounds. Thus, this study was proposed and designed to investigate the colonic targeting and colonic fermentation characteristics of rutin-loaded ovalbumin-ferulic acid-polysaccharide (OVA-FA-PS) complex emulsions. The results indicate that OVA-FA-PS emulsion effectively inhibits the degradation of rutin active substances and facilitates its transport of rutin to the colon. The analysis revealed that the OVA-FA-κ-carrageenan emulsion loaded with rutin exhibited superior elasticity and colon targeting properties compared to the OVA-FA-hyaluronic acid or OVA-FA-sodium alginate emulsions loaded with rutin in the composite emulsion. Additionally, it was observed that the rutin loaded within the OVA-FA-κ-carrageenan emulsion underwent degradation and was converted to 4-hydroxybenzoic acid during colonic fermentation.

The improvement of tyrosol bioavailability by encapsulation into liposomes using pH-driven method

To improve the poor water solubility and oral bioavailability of tyrosol, novel tyrosol liposomes (Tyr-LPs) were prepared by pH-driven method. Fourier transform infrared (FTIR) absorption spectra and X-ray diffraction (XRD) analysis indicated that Tyr-LPs were successfully encapsulated and tyrosol was in an amorphous state in liposomes. When tyrosol content in Tyr-LP was 1.33 mg/ml and the Tyr:LP (mass ratio) = 1:2, favorable dispersibility of Tyr-LP was exhibited, with an instability index of 0.049 ± 0.004, PDI of 0.274 ± 0.003, and the EE of 94.8 ± 2.5 %. In vivo pharmacokinetic studies showed that after oral administration of tyrosol or Tyr-LP (Tyr:LP = 1:2), concentration-versus-time curve (AUC0-720mins) and maximum concentration (Cmax) values of Tyr-LP was respectively 1.5-fold (P < 0.01) and 2.25-fold (P < 0.01) higher than tyrosol, which indicated that the oral bioavailability of tyrosol was effectively improved in Tyr-LPs. Our study thereby provides theoretical support for the application of Tyr-LP for optimal delivery of tryosol.

Whey Protein Sodium-Caseinate as a Deliverable Vector for EGCG: In Vitro Optimization of Its Bioaccessibility, Bioavailability, and Bioactivity Mode of Actions

Epigallocatechin gallate (EGCG), the principal catechin in green tea, exhibits diverse therapeutic properties. However, its clinical efficacy is hindered by poor stability and low bioavailability. This study investigated solid particle-in-oil-in-water (S/O/W) emulsions stabilized by whey protein isolate (WPI) and sodium caseinate (NaCas) as carriers to enhance the bioavailability and intestinal absorption of EGCG. Molecular docking revealed binding interactions between EGCG and these macromolecules. The WPI- and NaCas-stabilized emulsions exhibited high encapsulation efficiencies (>80%) and significantly enhanced the bioaccessibility of EGCG by 64% compared to free EGCG after simulated gastrointestinal digestion. Notably, the NaCas emulsion facilitated higher intestinal permeability of EGCG across Caco-2 monolayers, attributed to the strong intermolecular interactions between caseins and EGCG. Furthermore, the emulsions protected Caco-2 cells against oxidative stress by suppressing intracellular reactive oxygen species generation. These findings demonstrate the potential of WPI- and NaCas-stabilized emulsions as effective delivery systems to improve the bioavailability, stability, and bioactivity of polyphenols like EGCG, enabling their applications in functional foods and nutraceuticals.

Impact of nanotechnology on the oral delivery of phyto-bioactive compounds

Nanotechnology is an advanced field that has remarkable nutraceutical and food applications. Phyto-bioactive compounds (PBCs) play critical roles in promoting health and disease treatment. However, PBCs generally encounter several limitations that delay their widespread application. For example, most PBCs have low aqueous solubility, poor biostability, poor bioavailability, and a lack of target specificity. Moreover, the high concentrations of effective PBC doses also limit their application. As a result, encapsulating PBCs into an appropriate nanocarrier may increase their solubility and biostability and protect them from premature degradation. Moreover, nanoencapsulation could improve absorption and prolong circulation with a high opportunity for targeted delivery that may decrease unwanted toxicity. This review addresses the main parameters, variables, and barriers that control and affect oral PBC delivery. Moreover, this review discusses the potential role of biocompatible and biodegradable nanocarriers in improving the water solubility, chemical stability, bioavailability, and specificity/selectivity of PBCs.

Fabrication of glycated yeast cell protein via Maillard reaction for delivery of curcumin: improved environmental stability, antioxidant activity, and bioaccessibility

BACKGROUND

The application of curcumin (CUR) in the food industry is limited by its instability, hydrophobicity and low bioavailability. Yeast cell protein (YCP) is a by-product of spent brewer's yeast, which has the potential to deliver bioactive substances. However, the environmental stresses such as pH, salt and heat treatment has restricted its application in the food industry. Maillard reaction as a non-enzymatic browning reaction can improve protein stability under environmental stress.

RESULTS

The CUR was successfully encapsulated into the hydrophobic core of YCP/glycated YCP (GYCP) and enhanced by hydrogen bonding, resulting in static fluorescence quenching of YCP/GYCP. The average diameter and dispersibility of GYPC-CUR nanocomplex were significantly improved after glucose glycation (121.40 nm versus 139.70 nm). Moreover, the encapsulation capacity of CUR was not influenced by glucose glycation. The oxidative stability and bioaccessibility of CUR in nanocomplexes were increased compared with free CUR, especially complexed with GYCP conjugates.

CONCLUSION

Steric hindrance provided by glucose conjugation improved the enviriomental stability, oxidative activity and bioaccessibility of CUR in nanocomplexes. Thus, glucose-glycated YCP has potential application as a delivery carrier for hydrophobic compounds in functional foods. © 2022 Society of Chemical Industry.

Improving shikonin solubility and stability by encapsulation in natural surfactant-coated shikonin nanoparticles

It is significant to develop a colloidal delivery system to improve the water solubility, stability, and bioavailability of shikonin, which is a hydrophobic plant polyphenol with a variety of physiological activities. In this study, three kinds of natural surfactants (saponin, sophorolipid, and rhamnolipid) were used to prepare shikonin nanoparticles by the pH-driven method. The physicochemical and structural properties of the shikonin nanoparticles were characterized, including particle size, zeta potential, and morphology. The encapsulation efficiencies of shikonin nanoparticles coated with saponin and sophorolipid were 97.6% and 97.3%, respectively, which were much higher than that of rhamnolipid-coated shikonin nanoparticles (19.0%). Shikonin nanoparticles coated with saponin and sophorolipid showed good resistance to heat and light and maintained long-term stability during storage. Moreover, shikonin nanoparticles coated with saponin and sophorolipid improved their in vitro-bioavailability. PRACTICAL APPLICATION: These article results are of great importance for improving the stability and bioavailability of shikonin in functional foods, dietary supplements, or pharmaceutical preparations. Moreover, this study provided theoretical and practical guides for further research of shikonin nanoparticles and may promote the development of natural colloidal delivery systems.

Natural carriers: Recent advances in their use to improve the stability and bioaccessibility of food active compounds

In the last decades, the incorporation of bioactive compounds in food supplements aroused the attention of scientists. However, these ingredients often exhibit both low solubility and stability and their poor bioaccessibility within the gastrointestinal tract limits their effectiveness. To overcome these drawbacks, many carriers have been investigated for encapsulating nutraceuticals and enhancing their bioavailability. It is note that several different vegetable wall materials have been applied to build delivery systems. Considering their encapsulation mechanism, lipid and protein-based carriers display specific interaction patterns with bioactives, whereas polysaccharidic-based carriers can entrap them by creating porous highly stable networks. To maximize the encapsulation efficiency, mixed systems are very promising. Following the current goal of using natural and sustainable ingredients, only a limited number of studies about the isolation of new ingredients from agro-food waste are available. In this review, a comprehensive overview of the state of art in the development of innovative natural lipid-, protein- and polysaccharide-based plant carriers is presented, focusing on their application as food active compounds. Different aspects to be considered in the design of delivery systems are discussed, including the carrier structure and chemical features, the interaction between the encapsulating and the core material, and the parameters affecting bioactives entrapment.

Structuring and De-Structuring of Nanovectors from Algal Lipids: Simulated Digestion, Preliminary Antioxidant Capacity and In Vitro Tests

Biocompatible nanocarriers can be obtained by lipid extraction from natural sources such as algal biomasses, which accumulate different lipid classes depending on the employed culture media. Lipid aggregates can be distinguished according to supramolecular architecture into lamellar and nonlamellar structures. This distinction is mainly influenced by the lipid class and molecular packing parameter, which determine the possible values of interfacial curvature and thus the supramolecular symmetries that can be obtained. The nanosystems prepared from bio-sources are able to self-assemble into different compartmentalized structures due to their complex composition. They also present the advantage of increased carrier-target biocompatibility and are suitable to encapsulate and vehiculate poorly water-soluble compounds, e.g., natural antioxidants. Their functional properties stem from the interplay of several parameters. Following previous work, here the functionality of two series of structurally distinct lipid nanocarriers, namely liposomes and cubosomes deriving from algal biomasses with different lipid composition, is characterized. In the view of their possible use as pharmaceutical or nutraceutical formulations, both types of nanovectors were loaded with three well-known antioxidants, i.e., curcumin, α-tocopherol and piperine, and their carrier efficacy was compared considering their different structures. Firstly, carrier stability in biorelevant conditions was assessed by simulating a gastrointestinal tract model. Then, by using an integrated chemical and pharmacological approach, the functionality in terms of encapsulation efficiency, cargo bioaccessibility and kinetics of antioxidant capacity by UV-Visible spectroscopy was evaluated. Subsequently, in vitro cytotoxicity and viability tests after administration to model cell lines were performed. As a consequence of this investigation, it is possible to conclude that nanovectors from algal lipids, i.e., cubosomes and liposomes, can be efficient delivery agents for lipophilic antioxidants, being able to preserve and enhance their activity toward different targets while promoting sustained release.

Recent progresses in the delivery of β-carotene: From nano/microencapsulation to bioaccessibility

Beta-carotene (BC) as an efficient pro-vitamin is effective in improving vision, immune system and cognitive function as well as preventing coronary diseases and cancer. However, besides its poor chemical stability, the high lipophilic nature of BC reduces its dispersibility and consequently bioavailability which limits its application into food, pharmaceutical and nutraceuticals. Different carriers with vesicular or particulate structures have been studied and utilized for promoting BC solubility, dispersibility, and protection against diverse operational or environmental stresses and also controlling BC release and subsequent bioaccessibility. The current study, therefore reviews different micro/nanocarriers reported on BC encapsulation with special focusing on its bioavailability. Liposomal structures have been successfully used for enhancing BC stability and bioavailability. Besides, emulsion-based carriers including Pickering emulsions, nanoemulsions and microemulsions have been widely evaluated for BC encapsulation and protection. In addition, lipid-based nanoparticles and nanostructural carriers have also been applied successfully for this context. Moreover, gel structures including emulgels, hydrogels and oleogels are studied in some researches. Most of these delivery systems led to higher hydro-solubility and dispersibility of BC which consequently increased its bioavailability; thereupon could promote its application into food, cosmetic and nutraceutical products. However, for remarkable incorporation of BC and other bioactive compounds into edible products, the safety and toxicological aspects of these delivery system especially those designed in nano scale should be addressed in the further researches.

Nano-enabled plant-based colloidal delivery systems for bioactive agents in foods: Design, formulation, and application

Consumers are becoming increasingly aware of the impact of their dietary choices on the environment, animal welfare, and health, which is causing many of them to adopt more plant-based diets. For this reason, many sectors of the food industry are reformulating their products to contain more plant-based ingredients. This article describes recent research on the formation and application of nano-enabled colloidal delivery systems formulated from plant-based ingredients, such as polysaccharides, proteins, lipids, and phospholipids. These delivery systems include nanoemulsions, solid lipid nanoparticles, nanoliposomes, nanophytosomes, and biopolymer nanoparticles. The composition, size, structure, and charge of the particles in these delivery systems can be manipulated to create novel or improved functionalities, such as improved robustness, higher optical clarity, controlled release, and increased bioavailability. There have been major advances in the design, assembly, and application of plant-based edible nanoparticles within the food industry over the past decade or so. As a result, there are now a wide range of different options available for creating delivery systems for specific applications. In the future, it will be important to establish whether these formulations can be produced using economically viable methods and provide the desired functionality in real-life applications.

Improving foam performance using colloidal protein-polyphenol complexes: Lactoferrin and tannic acid

In this study, colloidal complexes were prepared from bovine lactoferrin (BLF) and tannic acid (TA) and then their ability to form and stabilize foams was characterized. The molecular interactions between BLF and TA were studied using fluorescence and molecular docking analysis, which suggested that hydrophobic forces were primarily involved in holding the complexes together. The production of colloidal BLF-TA complexes was supported by increases in turbidity and mean particle diameter, quenching of intrinsic fluorescence, decrease in surface hydrophobicity, and change in conformation. When used alone, BLF exhibited good foam formation but poor foam stability properties. In contrast, BLF-TA complexes exhibited good foam stability but poor foamability properties. The change in foaming properties of the proteins was closely related to their interactions with the polyphenols. These findings may be useful for the development of novel functional ingredients to construct food foams with good physicochemical and nutritional attributes.

Self-assembled nano-micelles of lactoferrin peptides: Structure, physicochemical properties, and application for encapsulating and delivering curcumin

Food-derived protein hydrolysate exhibits good bioactivity, compatibility, and low toxicity, etc. However, the information on protein hydrolysate-based micelles and their application as carriers for hydrophobic bioactive compounds is limited. In this study, an enzymatic partially hydrolyzed lactoferrin hydrolysate nano-micelle with the size within 50 nm was constructed, and its formation mechanism and delivery characteristics for curcumin (Cur) were studied. The results demonstrated that Cur was loaded into the micelles through hydrophobic interaction, and the encapsulation rate of Cur by nano-micelles was (93.44 ± 0.01)%. In addition, the nano-micelle system demonstrated excellent thermal stability, dilution stability, and storage stability. The in vitro simulated digestion proved that self-assembled nano-micelles could improve the transformation rate and bioaccessibility of Cur. This study revealed that lactoferrin hydrolysate self-assembled nano-micelle is a promising delivery system for hydrophobic bioactive compounds.

Sodium alginate/soybean protein-epigallocatechin-3-gallate conjugate hydrogel beads: evaluation of structural, physical, and functional properties

Sodium alginate (SA) hydrogel beads have been extensively studied as delivery systems for bioactive compounds. Key challenges include overcoming the highly porous and poor emulsifying properties of SA hydrogels. Herein, soy protein isolate (SPI) was modified by covalent and noncovalent conjugation with epigallocatechin-3-gallate (EGCG), followed by complexation with SA to change the SA structure and fabricate hydrogel beads with low porosities. Microencapsulation beads were fabricated from SA-, SA/SPI-, and SA/SPI-modified EGCG complexes with a corn oil/quercetin mixture core. After the covalent and noncovalent SPI-modified EGCG complexes were combined with SA, the OH stretching vibration shifted, indicating that hydrogen bonds formed between the protein and SA, and the crystal structure of SA was destroyed. To achieve crosslinking, the beads were injected into a CaCl₂ solution, whereby Ca²⁺ ions replaced the Na⁺ ions in SA. Meanwhile, the addition of covalent and noncovalent SPI-modified EGCG complexes promoted the binding capacity of Ca²⁺ and SA. All hydrogel beads possessed open-cell microstructures with interconnecting pores. The SA/SPI-modified EGCG hydrogel beads exhibited smoother surfaces, thicker shells, and lower porosity than the SA hydrogel beads. Moreover, they exhibited significantly higher antioxidant activities. During digestion, all types of hydrogel bead maintained their structure, and only a small part of the encapsulated oil and quercetin was digested in the upper part of the gastrointestinal tract. In short, the formation mechanism of hydrogel beads was clarified, and hydrogel beads with low porosity and high antioxidation activities were successfully fabricated.

Co-loading curcumin and quercetin in freeze-dried mushroom microparticles to inhibit lipid oxidation in beef patties

Curcumin (CCM) and quercetin (QCT) are natural antioxidants. In this study, the two antioxidants (5:1 w/w) were loaded into freeze-dried mushroom microparticles (FDMMs) to achieve synergistic antioxidative effect, and CCM-QCT-loaded FDMMs were incorporated in cooked beef patties to inhibit lipid oxidation. The loading was done by diffusing CCM-QCT dissolved in ethanol and polyethylene glycol-400 (40:60 v/v) into FDMMs. The loading capacity was 4.3% and 1.3% (w/w) for CCM and QCT, respectively. Crystalline CCM and QCT became amorphous within FDMMs according to X-ray diffraction and scanning electron microscopy. Confocal laser scanning microscopy confirmed the diffusion of CCM and QCT into the intracellular matrix of FDMMs. Both CCM and QCT were effectively preserved within FDMMs during UV irradiation at 253 nm. The minimum 2-thiobarbituric acid reactive values were observed for the patties with CCM-QCT-loaded FDMMs. Our results demonstrate the potential of porous mushroom matrices for loading lipophilic antioxidants to improve food quality.

Plant-Based Colloidal Delivery Systems for Bioactives

The supplementation of plant-based foods and beverages with bioactive agents may be an important strategy for increasing human healthiness. Numerous kinds of colloidal delivery systems have been developed to encapsulate bioactives with the goal of improving their water dispersibility, chemical stability, and bioavailability. In this review, we focus on colloidal delivery systems assembled entirely from plant-based ingredients, such as lipids, proteins, polysaccharides, phospholipids, and surfactants isolated from botanical sources. In particular, the utilization of these ingredients to create plant-based nanoemulsions, nanoliposomes, nanoparticles, and microgels is covered. The utilization of these delivery systems to encapsulate, protect, and release various kinds of bioactives is highlighted, including oil-soluble vitamins (like vitamin D), ω-3 oils, carotenoids (vitamin A precursors), curcuminoids, and polyphenols. The functionality of these delivery systems can be tailored to specific applications by careful selection of ingredients and processing operations, as this enables the composition, size, shape, internal structure, surface chemistry, and electrical characteristics of the colloidal particles to be controlled. The plant-based delivery systems discussed in this article may be useful for introducing active ingredients into the next generation of plant-based foods, meat, seafood, milk, and egg analogs. Nevertheless, there is still a need to systematically compare the functional performance of different delivery systems for specific applications to establish the most appropriate one. In addition, there is a need to test their efficacy at delivering bioavailable forms of bioactives using in vivo studies.

Nanotechnological Manipulation of Nutraceuticals and Phytochemicals for Healthy Purposes: Established Advantages vs. Still Undefined Risks

Numerous foods, plants, and their bioactive constituents (BACs), named nutraceuticals and phytochemicals by experts, have shown many beneficial effects including antifungal, antiviral, anti-inflammatory, antibacterial, antiulcer, anti-cholesterol, hypoglycemic, immunomodulatory, and antioxidant activities. Producers, consumers, and the market of food- and plant-related compounds are increasingly attracted by health-promoting foods and plants, thus requiring a wider and more fruitful exploitation of the healthy properties of their BACs. The demand for new BACs and for the development of novel functional foods and BACs-based food additives is pressing from various sectors. Unfortunately, low stability, poor water solubility, opsonization, and fast metabolism in vivo hinder the effective exploitation of the potential of BACs. To overcome these issues, researchers have engineered nanomaterials, obtaining food-grade delivery systems, and edible food- and plant-related nanoparticles (NPs) acting as color, flavor, and preservative additives and natural therapeutics. Here, we have reviewed the nanotechnological transformations of several BACs implemented to increase their bioavailability, to mask any unpleasant taste and flavors, to be included as active ingredients in food or food packaging, to improve food appearance, quality, and resistance to deterioration due to storage. The pending issue regarding the possible toxic effect of NPs, whose knowledge is still limited, has also been discussed.

Characterization, techno-functional properties, and encapsulation efficiency of self-assembled β-lactoglobulin nanostructures

Whey is a cheese co-product with high protein content used in the food industry due to its techno-functional properties and nutritive value. This study aims to optimize the production of β-lactoglobulin (β-lg) nanostructures, to characterize their techno-functional properties and stability, and to apply them as a carrier of bioactive molecules. Box-Behnken planning was applied to determine the best conditions to obtain the β-lg nanostructure, which consists in treatment at 100 °C in NaCl 50 mmol·L^-1 for 60 min. TEM analysis showed a fibril structure in the observed nanostructures. The nanostructured systems formed foam and emulsion with higher stability than the systems composed of the native protein. The results for encapsulation efficiency of bioactive compounds were 96.50%, 89.04%, 67.78%, and 36.39% for quercetin, rutin, naringin, and vitamin B_2, respectively. Thus, β-lg nanostructure's great capacity to encapsulate hydrophobic molecules was verified.

Zein Nanoparticles Improve the Oral Bioavailability of Curcumin in Wistar Rats

Curcumin is a natural compound obtained from turmeric root with high antioxidant and anti-inflammatory activities. However, clinical application of curcumin has been limited due to its low solubility and bioavailability and rapid metabolism and degradation. This study was conducted to evaluate the effect of curcumin incorporation in zein nanoparticles on the pharmacokinetic parameters of systemic curcumin in plasma. Wistar rats were administered a single oral dose of 250 mg/kg of standard curcumin (control) or nanocurcumin (zein-based nanoparticles, Nucaps). The proposed new formulation was also compared with two commercially available curcumin complexes. Blood samples were collected at different times, and plasma levels were determined using HPLC-MS/MS. Overall, nanocurcumin (Nucaps) formulation was well tolerated and showed a 9-fold increase in oral bioavailability when compared to the standard curcumin natural extract. In addition, the nanoparticles prepared in this study demonstrated a bioavailability profile superior to that of other bioavailability-enhanced curcumin complexes currently available in the marketplace. Thus, our nanoparticle-based formulation has shown great potential as a nutraceutical for the oral administration of curcumin.

Advances in edible nanoemulsions: Digestion, bioavailability, and potential toxicity

The design, fabrication, and application of edible nanoemulsions for the encapsulation and delivery of bioactive agents has been a highly active research field over the past decade or so. In particular, they have been widely used for the encapsulation and delivery of hydrophobic bioactive substances, such as hydrophobic drugs, lipids, vitamins, and phytochemicals. A great deal of progress has been made in creating stable edible nanoemulsions that can increase the stability and efficacy of these bioactive agents. This article highlights some of the most important recent advances within this area, including increasing the water-dispersibility of bioactives, protecting bioactives from chemical degradation during storage, increasing the bioavailability of bioactives after ingestion, and targeting the release of bioactives within the gastrointestinal tract. Moreover, it highlights progress that is being made in creating plant-based edible nanoemulsions. Finally, the potential toxicity of edible nanoemulsions is considered.

A novel approach to develop spray-dried encapsulated curcumin powder from oil-in-water emulsions stabilized by combined surfactants and chitosan

In this study, a novel approach to prepare spray-dried encapsulated curcumin powder was investigated. The effects of surfactants viz. Tween 80 (at 0.25 to 0.75% wt) and lecithin (at 1% wt) and of a stabilizer viz. chitosan (at 0 to 0.375% wt) on the characteristics of curcumin-based emulsions as well as on physicochemical properties of the resulting spray-dried encapsulated powder were determined. The optimal emulsion was noted to be the one formulated with 0.50 and 0.25% wt, respectively, of Tween 80 and chitosan (T0.50/C0.25). Spray-dried powder prepared from the optimal emulsion was compared to that prepared from an emulsion with 0.5% Tween 80 and 0% chitosan (T0.50/C0.00), as well as that from an emulsion with 0.25% Tween 80 and 0.25% chitosan (T0.25/C0.25). Physical properties of all powders were not significantly different. However, the encapsulation efficiency of T0.50/C0.25 powder (72.28%) was significantly higher than those of T0.50/C0.00 (47.19%) and T0.25/C0.25 powder (51.61%). Ferric reducing antioxidant powers of T0.50/C0.25 and T0.25/C0.25 powders were comparable but significantly higher than that of T0.50/C0.00 powder. After reconstitution, the mean particle sizes of T0.50/C0.25 and T0.25/C0.25 remained unchanged due to the protection by chitosan. T0.50/C0.00 powder was noted to exhibit the highest bioaccessibility (89.32%) in the simulated gastrointestinal tract. PRACTICAL APPLICATION: The results of this study can be used as a guideline to develop a stable formulation of curcumin feed emulsion that can later be transformed into an encapsulated powdery form via spray drying. Such a guideline should prove useful for a company looking for a way to produce high-quality functional ingredients and/or products from curcumin.

Nanoformulations to Enhance the Bioavailability and Physiological Functions of Polyphenols

Polyphenols are micronutrients that are widely present in human daily diets. Numerous studies have demonstrated their potential as antioxidants and anti-inflammatory agents, and for cancer prevention, heart protection and the treatment of neurodegenerative diseases. However, due to their vulnerability to environmental conditions and low bioavailability, their application in the food and medical fields is greatly limited. Nanoformulations, as excellent drug delivery systems, can overcome these limitations and maximize the pharmacological effects of polyphenols. In this review, we summarize the biological activities of polyphenols, together with systems for their delivery, including phospholipid complexes, lipid-based nanoparticles, protein-based nanoparticles, niosomes, polymers, micelles, emulsions and metal nanoparticles. The application of polyphenol nanoparticles in food and medicine is also discussed. Although loading into nanoparticles solves the main limitation to application of polyphenolic compounds, there are some concerns about their toxicological safety after entry into the human body. It is therefore necessary to conduct toxicity studies and residue analysis on the carrier.

Formulation of More Efficacious Curcumin Delivery Systems Using Colloid Science: Enhanced Solubility, Stability, and Bioavailability

Curcumin is a bioactive constituent isolated from turmeric that has historically been used as a seasoning, pigment, and herbal medicine in food. Recently, it has become one of the most commonly studied nutraceuticals in the pharmaceutical, supplement, and food areas because of its myriad of potential health benefits. For instance, it is claimed to exhibit antioxidant, anti-inflammatory, antimicrobial, antiparasite, and anticancer activities when ingested as a drug, supplement, or food. Toxicity studies suggest that it is safe to consume, even at relatively high levels. Its broad-spectrum biological activities and low toxicity have meant that it has been widely explored as a nutraceutical ingredient for application in functional foods. However, there are several hurdles that formulators must overcome when incorporating curcumin into commercial products, such as its low water solubility (especially under acidic and neutral conditions), chemical instability (especially under neutral and alkaline conditions), rapid metabolism by enzymes in the human body, and limited bioavailability. As a result, only a small fraction of ingested curcumin is actually absorbed into the bloodstream. These hurdles can be at least partially overcome by using encapsulation technologies, which involve trapping the curcumin within small particles. Some of the most commonly used edible microparticles or nanoparticles utilized for this purpose are micelles, liposomes, emulsions, solid lipid particles, and biopolymer particles. Each of these encapsulation technologies has its own benefits and limitations for particular product applications and it is important to select the most appropriate one.

Development of Next-Generation Nutritionally Fortified Plant-Based Milk Substitutes: Structural Design Principles

Consumers are increasingly interested in decreasing their dietary intake of animal-based food products, due to health, sustainability, and ethical concerns. For this reason, the food industry is creating new products from plant-based ingredients that simulate many of the physicochemical and sensory attributes associated with animal-derived foods, including milk, eggs, and meat. An understanding of how the ingredient type, amount, and organization influence the desirable physicochemical, sensory, and nutritional attributes of these plant-based foods is required to achieve this goal. A potential problem with plant-based diets is that they lack key micronutrients, such as vitamin B12, vitamin D, calcium, and ω-3 fatty acids. The aim of this review is to present the science behind the creation of next-generation nutritionally fortified plant-based milk substitutes. These milk-like products may be formed by mechanically breaking down certain plant materials (including nuts, seeds, and legumes) to produce a dispersion of oil bodies and other colloidal matter in water, or by forming oil-in-water emulsions by homogenizing plant-based oils and emulsifiers with water. A brief overview of the formulation and fabrication of plant-based milks is given. The relationship between the optical properties, rheology, and stability of plant-based milks and their composition and structure is then covered. Approaches to fortify these products with micronutrients that may be missing from a plant-based diet are also highlighted. In conclusion, this article highlights how the knowledge of structural design principles can be used to facilitate the creation of higher quality and more sustainable plant-based food products.

Impact of curcumin delivery system format on bioaccessibility: nanocrystals, nanoemulsion droplets, and natural oil bodies

Curcumin, a hydrophobic yellow-orange crystalline substance derived from plants, is claimed to exhibit a broad range of biological activities. Its application in functional foods and beverages is often limited by its low solubility in aqueous media, chemical instability, and low bioavailability. Previously, we have shown that curcumin can be successfully loaded into emulsions using the pH-shift method. In this study, we compared the efficacy of curcumin crystals dispersed in water (control) with three delivery systems produced using the pH-shift method: curcumin nanocrystals; curcumin-loaded nanoemulsions; and curcumin-loaded soy oil bodies. The nanoemulsions and oil bodies formed creamy yellow dispersions that were stable to creaming, whereas the nanocrystals formed a cloudy yellow-orange suspension that was prone to sedimentation. The gastrointestinal fate of the delivery systems was assessed using a static in vitro digestion model consisting of mouth, stomach, and small intestine phases. The nanoemulsions and oil bodies were rapidly and fully digested, while the nanocrystals were not. All three systems were relatively stable to chemical transformation in the in vitro digestion model. The nanocrystals gave a low bioaccessibility but the other two systems gave a high bioaccessibility, which was attributed to their ability to form mixed micelles to solubilize the curcumin. These results have important implications for the creation of more effective delivery systems for curcumin.

A novel and green nanoparticle formation approach to forming low-crystallinity curcumin nanoparticles to improve curcumin's bioaccessibility

Health-promoting effects of curcumin are well-known; however, curcumin has a very low bioavailability due to its crystalline structure. The main objective of this study was to develop a novel green nanoparticle formation method to generate low-crystallinity curcumin nanoparticles to enhance the bioavailability of curcumin. Nanoporous starch aerogels (NSAs) (surface area of 60 m²/g, pore size of 20 nm, density of 0.11 g/cm³, and porosity of 93%) were employed as a mold to produce curcumin nanoparticles with the help of supercritical carbon dioxide (SC-CO₂). The average particle size of the curcumin nanoparticles was 66 nm. Impregnation into NSAs decreased the crystallinity of curcumin and did not create any chemical bonding between curcumin nanoparticles and the NSA matrix. The highest impregnation capacity was 224.2 mg curcumin/g NSA. Curcumin nanoparticles significantly enhanced the bioaccessibility of curcumin by 173-fold when compared to the original curcumin. The concentration of curcumin in the bioaccessible fraction was improved from 0.003 to 0.125 mg/mL by impregnation of curcumin into NSAs (42-fold). This is a novel approach to produce food grade curcumin nanoparticles with reduced crystallinity and maximize the utilization of curcumin due to increased bioaccessibility.

Antimicrobial gum bio-based nanocomposites and their industrial and biomedical applications

Gum polysaccharides are derived from renewable sources. They are readily available, inexpensive, non-hazardous and eco-friendly. Depending upon the source, gums may be categorized as microbial gums, plant exudate gums or seed gums. Naturally occurring gum carbohydrates find multiple applications in the biomedical arena, compared with synthetic compounds, because of their unique structures and functionalities. Gums and their biocomposites are preferred for sustained drug delivery because they are safe and edible as well as more susceptible to biodegradation. The present review provides a state-of-the-art conspectus on the industrial and biomedical applications of antimicrobial gum-based biocomposites. Different kinds of gums polysaccharides will first be addressed based on their sources. Metal-, carbon- and organic-based nanostructures that are used in gum nanocomposites will then be reviewed with respect to their industrial and biomedical applications, to provide a backdrop for future research.

Recent advances in colloidal delivery systems for nutraceuticals: A case study - Delivery by Design of curcumin

Curcumin is a polyphenolic compound found in turmeric (Curcuma longa) rhizome that has potential biological benefits, including antioxidant, antimicrobial, anti-inflammatory, and anti-cancer activity. Incorporation of curcumin into functional food and beverage products, however, is challenging due to its low water-solubility, poor chemical stability, rapid metabolism, and low oral bioavailability. Researchers are, therefore developing a suite of particle-based delivery systems to maximize the potential health benefits of curcumin. Colloidal delivery systems, such as micelles, microemulsions, nanoemulsions, emulsions, solid lipid nanoparticles, nanostructured lipid carriers, biopolymer nanoparticles, and microgels have all been developed for this purpose. The functional performance of each of these delivery systems depends on its structure and physicochemical properties, such as particle composition, particle size, morphology, physicochemical stability, optical properties, rheology, and sensory attributes. As a result, each delivery system has its advantages and disadvantages for particular applications. Consequently, a delivery system must be specifically designed for the particular bioactive agent to be encapsulated, as well as the particular food matrix it will be incorporated into. In this review, we highlight the potential of the Delivery by Design (DbD) approach for identifying and selecting the most appropriate colloidal delivery system for a particular food application, using curcumin as a model bioactive agent.

Drug stabilization in the gastrointestinal tract and potential applications in the colonic delivery of oral zein-based formulations

In recent years, various oral dosage forms using biomaterials have been developed to deliver drugs to the colon for therapy due to the advantages of local treatment and its ideal location for drug delivery. To achieve site-specific delivery, the complete drug should be released in the colon, while the drug must be protected or their delivery minimized in the stomach and small intestine. The use of natural or synthetic polymers has been reported for these purposes. The roles of zein in drug delivery have been identified with various types of formulations for improving bioavailability, controlled drug release and targeted delivery. Although zein has been demonstrated as a potential material for pharmaceutical applications, a review of zein in the gastrointestinal tract for stabilizing drug- and colon-specific delivery is still missing. In the present review, we aim to provide typical strategies for using zein in formulations to minimize drug release/ensure drug protection in the upper part of the gastrointestinal tract. Furthermore, effective fabrications or modifications for drug release in the colon will be highlighted. This primary resource of related methods of using zein in the gastrointestinal tract will advance technologies for using it as a natural polymer for drug delivery.

In Vitro Bioaccessibility of Low-Crystallinity Phytosterol Nanoparticles Generated Using Nanoporous Starch Bioaerogels

Phytosterols are natural health-promoting bioactive compounds; however, phytosterols have very limited bioavailability due to their crystalline lipophilic structure. With the aim of improving bioaccessibility, low-crystallinity phytosterol nanoparticles were generated by supercritical carbon dioxide (SC-CO₂ ) impregnation of phytosterols into nanoporous starch aerogels (NSAs). The in vitro bioaccessibility of the phytosterol nanoparticles (35%) was significantly higher than that of the crude phytosterols (3%) after sequential oral, gastric, and intestinal digestion. The percentages of starch hydrolysis were not different among the various NSA preparations and reached to 64% after sequential digestion. The zeta potential of the phytosterol nanoparticles was higher compared to that of crude phytosterols in the micellar phase; indicating higher stability. The findings of this study support the use of NSA to produce nanoparticles of reduced crystallinity to improve the bioaccessibility of the lipophilic bioactive compounds. PRACTICAL APPLICATIONS: This novel process can decrease the size and crystallinity of phytosterols and thus improve phytosterols' bioavailability. It is a blueprint to apply to other water insoluble food bioactives. This novel approach may (i) improve the health benefits of water-insoluble bioactives; (ii) enable food manufacturers to add water-insoluble bioactives into low- and high-fat foods to produce health-promoting foods; and (iii) enhance the cost-benefit ratio of water insoluble bioactives.

Curcumin: Recent Advances in the Development of Strategies to Improve Oral Bioavailability

Substantial human and preclinical studies have shown that curcumin, a dietary compound from turmeric, has a variety of health-promoting effects including but not limited to antioxidant, antimicrobial, anti-inflammatory, and anticancer actions. However, curcumin has poor bioavailability, and high doses of curcumin are usually needed to exert its health-promoting effects in vivo, limiting its applications for disease prevention. Here, we discuss the health-promoting effects of curcumin, factors limiting its bioavailability, and strategies to improve its oral bioavailability.