Increasing the sensitivity and accuracy of detecting exosomes as biomarkers for cancer monitoring using optical nanobiosensors

The advancement of nanoscience and material design in recent times has facilitated the creation of point-of-care devices for cancer diagnosis and biomolecule sensing. Exosomes (EXOs) facilitate the transfer of bioactive molecules between cancer cells and diverse cells in the local and distant microenvironments, thereby contributing to cancer progression and metastasis. Specifically, EXOs derived from cancer are likely to function as biomarkers for early cancer detection due to the genetic or signaling alterations they transport as payload within the cancer cells of origin. It has been verified that EXOs circulate steadily in bodily secretions and contain a variety of information that indicates the progression of the tumor. However, acquiring molecular information and interactions regarding EXOs has presented significant technical challenges due to their nanoscale nature and high heterogeneity. Colorimetry, surface plasmon resonance (SPR), fluorescence, and Raman scattering are examples of optical techniques utilized to quantify cancer exosomal biomarkers, including lipids, proteins, RNA, and DNA. Many optically active nanoparticles (NPs), predominantly carbon-based, inorganic, organic, and composite-based nanomaterials, have been employed in biosensing technology. The exceptional physical properties exhibited by nanomaterials, including carbon NPs, noble metal NPs, and magnetic NPs, have facilitated significant progress in the development of optical nanobiosensors intended for the detection of EXOs originating from tumors. Following a summary of the biogenesis, biological functions, and biomarker value of known EXOs, this article provides an update on the detection methodologies currently under investigation. In conclusion, we propose some potential enhancements to optical biosensors utilized in detecting EXO, utilizing various NP materials such as silicon NPs, graphene oxide (GO), metal NPs, and quantum dots (QDs).

Investigations on anticancer activity of Eu3+ doped hydroxyapatite nanocomposites against MCF7 and 4T1 breast cancer cell lines: A structural and luminescence Perspective

Breast cancer remains a significant global health concern, necessitating the development of novel therapeutic approaches. In this study, we investigate the role of Eu3+ doped hydroxyapatite nanocomposites (Han: Eu3+) in the treatment of MCF7 and 4T1 breast cancer cell lines. Furthermore, we explored the structural and luminescent properties of these nanocomposites. Han: Eu3+ were synthesized using a modified co-precipitation method, and their morphology and crystal structure were characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD) in which the average crystalline size of Han: Eu3+ was found to be 25 nm, rendering them suitable for cellular uptake and targeted therapy. To gain insights into the luminescent properties of Han: Eu3+, their excitation and emission spectra were recorded using photoluminescence spectrometer. The characteristic red emission of Eu3+ ions was observed upon excitation, validating the successful doping of Eu3+ into the Han lattice, which was confirmed by the CIE chromaticity coordinate study. These luminescent properties of Han: Eu3+ hold promise for potential applications in bioimaging. To evaluate the efficacy of Han: Eu3+ in breast cancer treatment, MCF7 and 4T1 cell lines were exposed to varying concentrations of the nanocomposites. Cell viability assays revealed a concentration-dependent reduction in cell viability, indicating the potential anticancer activity of Han: Eu3+. The findings of this study contribute to the expanding field of nanomedicine, bringing targeted breast cancer treatments and us closer to more effective.

Introducing a portable electrochemical biosensor for Mycobacterium avium subsp. paratuberculosis detection using graphene oxide and chitosan

In this contribution, a novel, low-cost, high throughput, and ultra-selective electrochemical DNA nanobiosensor was developed for accurate on-site detection of Mycobacterium avium subspecies paratuberculosis (MAP) in real media for practical diagnosis of Johne's disease (JD). The method was designed based on the immobilization of graphene oxide and chitosan biopolymer on the surface of a glassy carbon electrode, modified by electrochemical immobilization of graphene oxide and chitosan biopolymer, followed by activation of biopolymer via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride and N-hydroxy succinimide (EDC/NHS) coupling system. Afterward, the commercial probe DNA (ssDNA) was stabilized on the activated electrode surface to prepare an ultra-selective ssDNA-stabilized nanobiosensor for MAP sensing called "ssDNA-stabilized GO-CH-EDC/NHS-modified electrode". Several characterization methods distinguished the bioelectrode. The DNA hybridization between the nanobiosensor and target DNA was confirmed by cyclic voltammetry and differential pulse voltammetry. "At optimal experimental conditions, the nanobiosensor showed a linear range of 1.0 × 10-15-1.0 × 10-12 mol L-1, a detection limit as low as 1.53 × 10-13 mol L-1, and a repeatability with a relative standard deviation (%RSD) of 4.7%. The reproducibility was also appropriate, with a %RSD of about 10%. It was used to diagnose MAP in real samples with highly accurate results. Therefore, the developed nanobiosensor can be used for clinical diagnosis of MAP.

Nitric Oxide Detection Using a Corona Phase Molecular Recognition Site on Chiral Single-Walled Carbon Nanotubes

Semiconducting single-walled carbon nanotubes (s-SWCNT) are structures that fluoresce in the near-infrared region. By coating SWCNT surfaces with polymeric materials such as single-chain DNA, changes in fluorescence emission occur in the presence of reagents. In this way, polymer-coated SWCNT structures allow them to be used as optical sensors for single molecule detection. Especially today, the inadequacy of the methods used in the detection of cellular molecules makes the early diagnosis of diseases such as cancer difficult at the single-molecule level. In this study, the detection of nitric oxide (NO) signals, which are a marker of cancer, was carried out at the single-molecule level. In this context, a sensor structure was formed by coating the 7,6-chiral s-SWCNT surface with ssDNA with different oligonucleotide lengths (AT). The sensor structure was characterized by using UV-vis spectroscopy and Raman spectroscopy microscopy. After formation of the sensor structure, a selectivity library was created using various molecules. As a result of the coating of the SWCNT (7,6) surface with DNA corona phase formation, Raman peaks at 195 and 276 cm-1 were observed to shift to the right. Additionally, the selectivity library results showed that the (AT)30 sequence can be used in NO detection. As a result of the studies using SWCNT (7.6)- (AT)30, the limit of detection (LOD) and limit of determination (LOQ) values of the sensor against NO were found to be 1.24 and 4.13 μM, respectively.

Research progress of sensors based on molecularly imprinted polymers in analytical and biomedical analysis

Molecularly imprinted polymers (MIPs) have had tremendous impact on biomimetic recognition due to their precise specificity and high affinity comparable to that of antibodies, which has shown the great advantages of easy preparation, good stability and low cost. The combination of MIPs with other analytical technologies can not only achieve rapid extraction and sensitive detection of target compounds, improving the level of analysis, but also achieve precise targeted delivery, in-vivo imaging and other applications. Among them, the recognition mechanism plays a vital role in chemical and biological sensing, while the improvement of the recognition element, such as the addition of new nanomaterials, can greatly improve the analytical performance of the sensor, especially in terms of selectivity. Currently, due to the need for rapid diagnosis and improved sensing properties (such as selectivity, stability, and cost-effectiveness), researchers are investigating new recognition elements and their combinations to improve the recognition capabilities of chemical sensing and bio-sensing. Therefore, this review mainly discusses the design strategies of optical sensors, electrochemical sensors and photoelectric sensors with molecular imprinting technology and their applications in environmental systems, food fields, drug detection and biology including bacteria and viruses.

Recent Advances in Fluorescent Nanoprobes for Food Safety Detection

Fluorescent nanoprobes show similar fluorescence properties to traditional organic dyes, but the addition of nanotechnology accurately controls the size, shape, chemical composition, and surface chemistry of the nanoprobes with unique characteristics and properties, such as bright luminescence, high photostability, and strong biocompatibility. For example, modifying aptamers or antibodies on a fluorescent nanoprobe provides high selectivity and specificity for different objects to be tested. Fluorescence intensity, life, and other parameters of targets can be changed by different sensing mechanisms based on the unique structural and optical characteristics of fluorescent nanoprobes. What's more, the detection of fluorescent nanoprobes is cost-saving, simple, and offers great advantages in rapid food detection. Sensing mechanisms of fluorescent nanoprobes were introduced in this paper, focusing on the application progress in pesticide residues, veterinary drug residues, heavy metals, microbes, mycotoxins, and other substances in food safety detection in recent years. A brief outlook for future development was provided as well.

A Ratiometric Fluorescence Amplification Using Copper Nanoclusters with o-Phenylenediamine Sensor for Determination of Mercury (II) in Natural Water

A simple and rapid method for determining mercury (II) has been developed using L-cysteine-capped copper nanocluster (CuNCs) with o-phenylenediamine (OPD) as the sensor. The characteristic fluorescence peak of the synthesized CuNCs was observed at 460 nm. The fluorescence properties of CuNCs were strongly influenced by the addition of mercury (II). Upon addition, CuNCs were oxidized to form Cu²⁺. Then, the OPD were rapidly oxidized by Cu²⁺ to form o-phenylenediamine oxide (oxOPD), as evidenced by the strong fluorescence peak at 547 nm, resulting in a decrease in the fluorescence intensity at 460 nm and an increase in the fluorescence intensity at 547 nm. Under optimal conditions, a calibration curve between the fluorescence ratio (I547/I460) and mercury (II) concentration was constructed with a linearity of 0-1000 µg L^-1. The limit of detection (LOD) and limit of quantification (LOQ) were found at 18.0 µg L^-1 and 62.0 µg L^-1, respectively. The recovery percentage was in the range of 96.8-106.4%. The developed method was also compared with the standard ICP-OES method. The results were found to be not significantly different at a 95% confidence level (t_stat = 0.365 < t_crit = 2.262). This demonstrated that the developed method could be applied for detecting mercury (II) in natural water samples.

Exploring the multifunctional roles of quantum dots for unlocking the future of biology and medicine

With recent advancements in nanomedicines and their associated research with biological fields, their translation into clinically-applicable products is still below promises. Quantum dots (QDs) have received immense research attention and investment in the four decades since their discovery. We explored the extensive biomedical applications of QDs, viz. Bio-imaging, drug research, drug delivery, immune assays, biosensors, gene therapy, diagnostics, their toxic effects, and bio-compatibility. We unravelled the possibility of using emerging data-driven methodologies (bigdata, artificial intelligence, machine learning, high-throughput experimentation, computational automation) as excellent sources for time, space, and complexity optimization. We also discussed ongoing clinical trials, related challenges, and the technical aspects that should be considered to improve the clinical fate of QDs and promising future research directions.

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

Increasing trace levels of antibiotics and hormones in the environment and food samples are concerning and pose a threat. Opto-electrochemical sensors have received attention due to their low cost, portability, sensitivity, analytical performance, and ease of deployment in the field as compared to conventional expensive technologies that are time-consuming and require experienced professionals. Metal-organic frameworks (MOFs) with variable porosity, active functional sites, and fluorescence capacity are attractive materials for developing opto-electrochemical sensors. Herein, the insights into the capabilities of electrochemical and luminescent MOF sensors for detection and monitoring of antibiotics and hormones from various samples are critically reviewed. The detailed sensing mechanisms and detection limits of MOF sensors are addressed. The challenges, recent advances, and future directions for the development of stable, high-performance MOFs as commercially viable next-generation opto-electrochemical sensor materials for the detection and monitoring of diverse analytes are discussed.

Recent advances in quantum dot-based fluorescence-linked immunosorbent assays

Fluorescence immunoassays have been given considerable attention among the quantitative detection methods in the clinical medicine and food safety testing fields. In particular, semiconductor quantum dots (QDs) have become ideal fluorescent probes for highly sensitive and multiplexed detection due to their unique photophysical properties, and the QD fluorescence-linked immunosorbent assay (FLISA) with high sensitivity, high accuracy, and high throughput has been greatly developed recently. In this manuscript, the advantages of applying QDs to FLISA platforms and some strategies for their application to in vitro diagnostics and food safety are discussed. Given the rapid development of this field, we classify these strategies based on the combination of QD types and detection targets, including traditional QDs or QD micro/nano-spheres-FLISA, and multiple FLISA platforms. In addition, some new sensors based on the QD-FLISA are introduced; this is one of the hot spots in this field. The current focus and future direction of QD-FLISA are also discussed, which provides important guidance for the further development of FLISA.

Design of functional nanoparticles by microfluidic platforms as advanced drug delivery systems for cancer therapy

Nanoparticle systems are functional carriers that can be used in the cancer therapy field for the delivery of a variety of hydrophobic and/or hydrophilic drugs. Recently, the advent of microfluidic platforms represents an advanced approach to the development of new nanoparticle-based drug delivery systems. Particularly, microfluidics can simplify the design of new nanoparticle-based systems with tunable physicochemical properties such as size, size distribution and morphology, ensuring high batch-to-batch reproducibility and consequently, an enhanced therapeutic effect in vitro and in vivo. In this perspective, we present accurate state-of-the-art microfluidic platforms focusing on the fabrication of polymer-based, lipid-based, lipid/polymer-based, inorganic-based and metal-based nanoparticles for biomedical applications.

Hybrid Nanomat: Copolymer Template CdSe Quantum Dots In Situ Stabilized and Immobilized within Nanofiber Matrix

Fabrication and characterization of hybrid nanomats containing quantum dots can play a prominent role in the development of advanced biosensors and bio-based semiconductors. Owing to their size-dependent properties and controlled nanostructures, quantum dots (QDs) exhibit distinct optical and electronic characteristics. However, QDs include heavy metals and often require stabilizing agents which are toxic for biological applications. Here, to mitigate the use of toxic ligands, cadmium selenide quantum dots (CdSe QDs) were synthesized in situ with polyvinylpyrrolidone (PVP) at room temperature. The addition of PVP polymer provided size regulation, stability, and control over size distribution of CdSe QDs. The characterization of the optical properties of the CdSe QDs was performed using fluorescence and ultraviolet-visible (UV-Vis) spectroscopy. CdSe QDs exhibited a typical absorbance peak at 280 nm and a photoluminescence emission peak at 580 nm. Transmission electron microscopy (TEM) micrographs demonstrated that CdSe QDs having an average size of 6 ± 4 nm were obtained via wet chemistry method. CdSe QDs were immobilized in a blend of PVP and poly(L-lactide-co-ε-caprolactone) (PL-b-CL) copolymer that was electrospun to produce nanofibers. Scanning electron microscopy (SEM), thermal analyses and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) were used to characterize properties of fabricated nanofibers. Both pristine and hybrid nanofibers possessed cylindrical geometry and rough surface features, facilitating increased surface area. Infrared absorption spectra showed a slight shift in absorbance peaks due to interaction of PVP-coated CdSe QDs and nanofiber matrix. The presence of CdSe QDs influenced the fiber diameter and their thermal stability. Further, in vitro biological analyses of hybrid nanofibers showed promising antibacterial effect and decline in cancer cell viability. This study offers a simple approach to obtain hybrid nanomats immobilized with size-controlled PVP-coated CdSe QDs, which have potential applications as biosensors and antibacterial and anticancer cell agents.

Nanomaterials for optical biosensors in forensic analysis

Biosensors are compact analytical devices capable of transducing a biological interaction event into a measurable signal outcome in real-time. They can provide sensitive and affordable analysis of samples without the need for additional laboratory equipment or complex preparation steps. Biosensors may be beneficial for forensic analysis as they can facilitate large-scale high-throughput, sensitive screening of forensic samples to detect target molecules that are of high evidential value. Nanomaterials are gaining attention as desirable components of biosensors that can enhance detection and signal efficiency. Biosensors that incorporate nanomaterials within their design have been widely reported and developed for medical purposes but are yet to find routine employment within forensic science despite their proven potential. In this article, key examples of the use of nanomaterials within optical biosensors designed for forensic analysis are outlined. Their design and mechanism of detection are both considered throughout, discussing how nanomaterials can enhance the detection of the target analyte. The critical evaluation of the optical biosensors detailed within this review article should help to guide future optical biosensor design via the incorporation of nanomaterials, for not only forensic analysis but alternative analytical fields where such biosensors may prove a valuable addition to current workflows.

Lighting up Micro-/Nanorobots with Fluorescence

Micro-/nanorobots (MNRs) can be autonomously propelled on demand in complex biological environments and thus may bring revolutionary changes to biomedicines. Fluorescence has been widely used in real-time imaging, chemo-/biosensing, and photo-(chemo-) therapy. The integration of MNRs with fluorescence generates fluorescent MNRs with unique advantages of optical trackability, on-the-fly environmental sensitivity, and targeting chemo-/photon-induced cytotoxicity. This review provides an up-to-date overview of fluorescent MNRs. After the highlighted elucidation about MNRs of various propulsion mechanisms and the introductory information on fluorescence with emphasis on the fluorescent mechanisms and materials, we systematically illustrate the design and preparation strategies to integrate MNRs with fluorescent substances and their biomedical applications in imaging-guided drug delivery, intelligent on-the-fly sensing and photo-(chemo-) therapy. In the end, we summarize the main challenges and provide an outlook on the future directions of fluorescent MNRs. This work is expected to attract and inspire researchers from different communities to advance the creation and practical application of fluorescent MNRs on a broad horizon.

Growth Kinetics of Zinc Sulphide Nanocrystals Synthesized by Colloidal Thermolysis of Fatty Acid Carboxylates

Zinc sulphide (ZnS) is an important semiconductor with widespread electronic and catalytic applications. The growth kinetics of ZnS nanocrystals synthesized by the thermal decomposition of zinc ricinoleate carboxylates in an oleylamine:dodecanethiol (1 : 1) solvent mixture isreported. Crystalline sphalerite ZnS nanocrystals with quantum dot sizes of 2.3–5.3 nm were obtained at temperatures higher than 240°C. The p-XRD patterns showed a clear relationship between the crystallite sizes and the peak broadness at a temperature range of 250–300°C. The optical bandgap energies of the ZnS nanocrystals reduced from 4.27 eV to 3.73 eV as the time of reaction increased from 20 to 60 min at 250°C. The activation energy for the growth kinetics of the ZnS nanocrystals was determined to be 36.24 kJ/mol which compares closely to those reported in the literature for aqueous systems.

A Brief Review of Carbon Dots-Silica Nanoparticles Synthesis and their Potential Use as Biosensing and Theragnostic Applications

Carbon dots (CDs) are carbon nanoparticles with sizes below 10 nm and have attracted attention due to their relatively low toxicity, great biocompatibility, water solubility, facile synthesis, and exceptional photoluminescence properties. Accordingly, CDs have been widely exploited in different sensing and biomedical applications, for example, metal sensing, catalysis, biosensing, bioimaging, drug and gene delivery, and theragnostic applications. Similarly, the well-known properties of silica, such as facile surface functionalization, good biocompatibility, high surface area, and tunable pore volume, have allowed the loading of diverse inorganic and organic moieties and nanoparticles, creating complex hybrid nanostructures that exploit distinct properties (optical, magnetic, metallic, mesoporous, etc.) for sensing, biosensing, bioimaging, diagnosis, and gene and drug delivery. In this context, CDs have been successfully grafted into diverse silica nanostructures through various synthesis methods (e.g., solgel chemistry, inverse microemulsion, surfactant templating, and molecular imprinting technology (MIT)), imparting hybrid nanostructures with multimodal properties for distinct objectives. This review discusses the recently employed synthesis methods for CDs and silica nanoparticles and their typical applications. Then, we focus on combined synthesis techniques of CD-silica nanostructures and their promising biosensing operations. Finally, we overview the most recent potential applications of these materials as innovative smart hybrid nanocarriers and theragnostic agents for the nanomedical field.

In situ-Synthesized cadmium sulfide quantum dots in pore-forming protein and polysaccharide matrices for optical biosensing applications

The main limitation for practical implementation of quantum dots-based sensors and biosensors is the possible contamination of sensing media with quantum dots (QDs) moved out from the sensor structure, being critical for living systems measurements. Numerous efforts have addressed the challenge of pre-synthesized QDs incorporation into porous matrix provide, on the one hand, proper fixation of quantum dots in its volume and preserving a free analyte transfer from the sensing media to them - on the other hand. Here, we propose an alternative insight into this problem. Instead of using preliminary synthesized particles for doping a matrix, we have in situ synthesized cadmium sulfide QDs in porous biopolymeric matrices, both in an aqueous solution and on a mica substrate. The proposed technique allows obtaining QDs in a matrix acting simultaneously as a ligand passivating surface defects and preventing QDs aggregation. The conjugates were used as a photoluminescence sensor for the metal ions and glutathione detection in an aqueous media. Different kinds of sensor responses have been found depending on the analyte nature. Zinc ions' presence initiates the intraband QDs emission increases due to the reduction of non-radiative processes. The presence of copper ions, in contrast, leads to a gradual photoluminescence decrease due to the formation of the non-luminescent copper-based alloy in the QDs structure. Finally, the presence of glutathione initiates a ligand exchange process followed by some QDs surface treatment enhancing defect-related photoluminescence. As a result, three different kinds of sensor responses for three analytes allow claiming development of a new selective QD-based sensor suitable for biomedical applications.

Silica covered stannic oxide nanoparticles-an easily prepared robust substrate for optical sensors

This paper describes a facile way to prepare a photophysically inert sensor substrate. Stannic oxide encapsulated silica nanoparticles with average diameters between 30 and 70 nm have been prepared by one-pot reverse-phase emulsion methodology. The constituents and core/shell morphology of the nanoparticles were demonstrated by electron microscopic technology, energy-dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy. X-ray diffraction was employed to provide additional constitutional and structural information. It has been shown that nanoparticles prepared by this method are optically clear in suspension. After anchoring optical indicators, this nanoparticle can be utilized as a sensor module both in biology and other analytical areas.

Aminopropylimidazole as an Advantageous Coating in the Synthesis of Functionalized Magnetite Nanoparticles

Implementing new methods to prepare magnetite nanoparticles with a covered or uncovered surface has been, and still is, a significant challenge. In this work, we describe a very clear and effortless way for the preparation of magnetite nanoparticles using two types of bases, namely: 1-(3-aminopropyl)imidazole and sodium hydroxide. Fourier transform infrared spectroscopy (FTIR) served as a tool for the structural investigation of the as-prepared magnetite nanoparticles. The morphology of the samples was investigated using Transmission Electron Microscopy (TEM). Comprehensive high-resolution X-ray photoelectron spectroscopy investigations (XPS) were applied as an effective tool for analyzing the composition of the various types of magnetic nanoparticles. Further polymer linkage was accomplished with poly(benzofuran-co-arylacetic acid) on the amino-functionalized surface of aminopropylimidazole-containing magnetic nanoparticles. The findings are promising for biomedicine, catalysis, and nanotechnology applications.

PVA-SM microstructure enhanced ratiometric fluorescence probe for formaldehyde detection in solution and gas

Formaldehyde (FA) is one of the most common pollutants, which has tremendous harm to humans and environment. In this work, 4-amino-3-pentene-2-one (Fluoral-p) and SiO₂ coated quantum dot (QD@SiO₂) were combined to implement a new ratiometric fluorescence probe QD@SiO₂-Fluoral-p for FA detection. In addition, by utilization of polyvinyl alcohol (PVA) and SiO₂ microsphere (SM), a kind of PVA-SM microstructure was assembled with QD@SiO₂-Fluoral-p to composite a signal enhanced sensing film. The QD@SiO₂-Fluoral-p exhibited good response to 0-400 mg/L FA solution and an enhancement around 15 folds was realized after introducing PVA-SM. In both situations, the probe showed linear relationship to FA concentration (C_FA), with detection limits of 14 and 0.5 mg/L, respectively. Also, the sensing film showed a good linear response to FA gas in the range of 0 to 2 ppm, with a detection limit 0.03 ppm. As a result, the PVA-SM enhanced ratiometric fluorescence probe features high sensitivity, low detection limit, good selectivity, as well as portable, which can serve as a useful tool for investigating FA in solution and gas at room temperature.

Uptake of Upconverting Nanoparticles by Breast Cancer Cells: Surface Coating versus the Protein Corona

Fluorophores with multifunctional properties known as rare-earth-doped nanoparticles (RENPs) are promising candidates for bioimaging, therapy, and drug delivery. When applied in vivo, these nanoparticles (NPs) have to retain long blood-circulation time, bypass elimination by phagocytic cells, and successfully arrive at the target area. Usually, NPs in a biological medium are exposed to proteins, which form the so-called "protein corona" (PC) around the NPs and influence their targeted delivery and accumulation in cells and tissues. Different surface coatings change the PC size and composition, subsequently deciding the fate of the NPs. Thus, detailed studies on the PC are of utmost importance to determine the most suitable NP surface modification for biomedical use. When it comes to RENPs, these studies are particularly scarce. Here, we investigate the PC composition and its impact on the cellular uptake of citrate-, SiO₂-, and phospholipid micelle-coated RENPs (LiYF₄:Yb³⁺,Tm³⁺). We observed that the PC of citrate- and phospholipid-coated RENPs is relatively stable and similar in the adsorbed protein composition, while the PC of SiO₂-coated RENPs is larger and highly dynamic. Moreover, biocompatibility, accumulation, and cytotoxicity of various RENPs in cancer cells have been evaluated. On the basis of the cellular imaging, supported by the inhibition studies, it was revealed that RENPs are internalized by endocytosis and that specific endocytic routes are PC composition dependent. Overall, these results are essential to fill the gaps in the fundamental understanding of the nano-biointeractions of RENPs, pertinent for their envisioned application in biomedicine.

Electroanalytical overview: utilising micro- and nano-dimensional sized materials in electrochemical-based biosensing platforms

Research into electrochemical biosensors represents a significant portion of the large interdisciplinary field of biosensing. The drive to develop reliable, sensitive, and selective biosensing platforms for key environmental and medical biomarkers is ever expanding due to the current climate. This push for the detection of vital biomarkers at lower concentrations, with increased reliability, has necessitated the utilisation of micro- and nano-dimensional materials. There is a wide variety of nanomaterials available for exploration, all having unique sets of properties that help to enhance the performance of biosensors. In recent years, a large portion of research has focussed on combining these different materials to utilise the different properties in one sensor platform. This research has allowed biosensors to reach new levels of sensitivity, but we note that there is room for improvement in the reporting of this field. Numerous examples are published that report improvements in the biosensor performance through the mixing of multiple materials, but there is little discussion presented on why each nanomaterial is chosen and whether they synergise well together to warrant the inherent increase in production time and cost. Research into micro-nano materials is vital for the continued development of improved biosensing platforms, and further exploration into understanding their individual and synergistic properties will continue to push the area forward. It will continue to provide solutions for the global sensing requirements through the development of novel materials with beneficial properties, improved incorporation strategies for the materials, the combination of synergetic materials, and the reduction in cost of production of these nanomaterials.

Probing How Various Metal Ions Interact with the Surface of QDs: Implication of the Interaction Event on the Photophysics of QDs

With an aim to understand the mechanism of interaction between quantum dots (QDs) and various metal ions, fluorescence response of less-toxic and water-soluble glutathione-capped Zn-Ag-In-S (GSH@ZAIS) QDs in the presence of different metal ions has been investigated at both ensemble and single-molecule level. Fourier transform infrared (FT-IR) spectroscopy has also been performed to obtain a molecular level understanding of the interaction event. The steady-state data reveal no significant change in QD emission for alkali and alkaline earth metal ions, while there is a decrease in fluorescence intensity for transition metal (TM) and some heavy transition metal (HTM) ions. Interestingly, a significant fluorescent enhancement (FE) (19-96%) of QDs is found for Cd²⁺ ions. Time-resolved fluorescence studies reveal that all the three decay components of QDs decrease in the presence of first-row TM ions. However, in the case of Cd²⁺, the shorter component is found to increase while the longer one decreases. The analysis of data reveals that photoinduced electron transfer is responsible for fluorescence quenching of QDs in the presence of first-row TM ions and destruction/removal of trap/defect states in the case of Cd²⁺ causes the FE. In FT-IR experiments, a prominent peak at 670 cm^-1, corresponding to Cd-S stretching vibrations, indicates strong ground-state interactions between the -SH of GSH and Cd²⁺ ions. Moreover, a decrease in the diffusion coefficient of QDs in the presence of Cd²⁺ ions during fluorescence correlation spectroscopy (FCS) studies further substantiates the removal of GSH by Cd²⁺ from the surface of QDs. The optical output of this study demonstrates that ZAIS can be used for fluorescence signaling of various metal ions and in particular selective detection of Cd²⁺. More importantly, these results also suggest that Cd²⁺ can effectively be used for enhancing the fluorescence quantum yield of thiol-capped QDs such as GSH@ZAIS.

Nano-scale selective and sensitive optical sensor for metronidazole based on fluorescence quenching: 1H-Phenanthro[9,10-d]imidazolyl-calix[4]arene fluorescent probe

It is crucial to determine and control the metronidazole (MET) ingredient in food and pharmaceuticals for human health and food safety. Even though many sensors have been previously reported to detect MET, there is still a need for a highly selective and sensitive, easy, fast, cost-effective sensor in this area. Herein, we report a fluorescent calix[4]arene derivative (PIMC) for highly selective and sensitive and facile and rapid MET detection based on fluorescence (FL) quenching. The highest FL quenching occurs when PIMC is exposed to MET solution at 400 nm (λ_ex = 340). Owing to the quenching efficacy of MET linearly up to 5.5 × 10⁴ nM was obtained a detection limit of 2.44 nM. Besides, interferences of other pharmaceuticals and ions on probe performance were investigated. The FL probe was successful in MET detection without the assistance of any separation techniques in a pharmaceutical sample (tablet) with an acceptable recovery of 101.3%. The applicability of the current probe as a paper-based sensor to MET detection has been successfully tested. As a result, the proposed probe presents a fast and suitable strategy to sensitive and selective detect MET and proves a good potential for practical applications, especially pharmaceutical preparations.

Optical and magnetic resonance imaging approaches for investigating the tumour microenvironment: state-of-the-art review and future trends

The tumour microenvironment (TME) strongly influences tumorigenesis and metastasis. Two of the most characterized properties of the TME are acidosis and hypoxia, both of which are considered hallmarks of tumours as well as critical factors in response to anticancer treatments. Currently, various imaging approaches exist to measure acidosis and hypoxia in the TME, including magnetic resonance imaging (MRI), positron emission tomography and optical imaging. In this review, we will focus on the latest fluorescent-based methods for optical sensing of cell metabolism and MRI as diagnostic imaging tools applied both in vitro and in vivo. The primary emphasis will be on describing the current and future uses of systems that can measure intra- and extra-cellular pH and oxygen changes at high spatial and temporal resolution. In addition, the suitability of these approaches for mapping tumour heterogeneity, and assessing response or failure to therapeutics will also be covered.

A high-temperature continuous stirred-tank reactor cascade for the multistep synthesis of InP/ZnS quantum dots

Multistep and continuous production of core–shell InP/ZnS semiconductor nanocrystals in a high-temperature and miniature continuous stirred-tank reactor cascade.

An organogel library for solution NMR analysis of nanoparticle suspensions in non-aqueous samples

Surface contrast solution NMR methods (scNMR) are emerging as powerful tools to investigate the adsorption of small molecule ligands to the surface of nanoparticles (NP), returning fundamental insight into the kinetics and thermodynamics of sorption, as well as structural information on the adsorbed species. A prerequisite for the acquisition of high quality solution NMR data is the preparation of homogeneous and stable samples that return consistent NMR spectra and allow extensive signal averaging. Unfortunately, this condition does not apply to NMR samples containing NPs that often show a tendency to sediment and accumulate at the bottom of the NMR tube over the course of the experiment. We have recently shown that preparing NMR samples in an agarose gel matrix inhibits sedimentation and allows the characterization of small molecule-NP interactions by scNMR. Unfortunately, as the agarose gel only forms in aqueous solution, this sample preparation method cannot be used to stabilize NP suspensions in a non-aqueous environment. Here, we introduce a library of 48 organogels, based on low molecular-mass organic gelators (LMOGs), to prepare NMR samples of small molecule/NP systems in a wide range of organic solvents. In addition, we present a simple method that takes advantage of ¹H transverse relaxation (¹H-R₂) measurements to screen the library and identify the best gelator to characterize the small molecule-NP interaction of interest in the solvent of choice. We expect the results of this study will enable the preparation of homogeneous and stable samples of NPs in non-aqueous environments, therefore dramatically increasing the applicability of scNMR to the characterization of heterogeneous interactions and to the investigation of the role played by solvent molecules in regulating the kinetics and thermodynamics of sorption.

Quantitative Study of the Nonlinearly Enhanced Photoacoustic/Photothermal Effect by Strong LSPR-Coupled Nanoassemblies

The extensive exploration of the collective optical and thermal effects for localized surface plasmon resonance (LSPR)-coupled nanoassemblies has propelled much recent research and development in fields of photoacoustic (PA) imaging and photothermal (PT) therapy, while the rational design and proper engineering of these assemblies under quantitative guidance is still a highly challenging task. In this work, by utilizing the finite element analysis (FEA) method and taking gold nanochains as example, the authors quantitatively studied the coupling optical/thermal response of the nanoassemblies and the associated nonlinearly enhanced PA/PT effect. Results show that compared with their individuals, the strong electromagnetic/thermal coupling between the individuals of the nanoassemblies results in a several-time enhancement of the per-particle-weighted optical absorption, consequential thermal field enhancement, and initial PA pressure, resulting in nonlinearly amplified energy conversion from incident light to heat and PA waves. The dependence of the nonlinear PA/PT enhancement on the assembly chain length, the size of the individuals, the interparticle distance, and the size uniformity of the building blocks is quantitatively discussed. PA experiments on gold nanochains and gold nanospheres are performed to validate the proposition, and the experiments well silhouetted the theoretical discussion. This work paves the way for the rational construction and optimization of plasmonic nanoassemblies with improved PA/PT conversion efficiency.

Highly Sensitive and Selective Colorimetric Sensor of Mercury (II) based on Layer-by-Layer Deposition of Gold/Silver Bimetallic Nanoparticles

A new colorimetric sensor based on gold/silver bimetallic nanoparticles (Au-Ag BNPs) for the sensitive and selective detection of mercury (II) was developed. Gold nanoparticles (AuNPs) were synthesized by Turkevich method. The surface modification of AuNPs was modified by the layer-by-layer technique using poly(diallyl dimethylammonium chloride) which provided positively charged of AuNPs. Negatively charged silver nanoparticles (AgNPs) were synthesized by chemical reduction using poly(4-styrenesulfonic acid-co-maleic acid) as the stabilizing agent. The layer-by-layer assembly deposition technique was used to prepare Au-Ag BNPs of positively and negatively charged of AuNPs and AgNPs, respectively. The synthesized Au-Ag BNPs were characterized by a UV-visible spectrophotometer, zeta potential analyzer, FT-IR, TEM, XRD, and EDX. The Au-Ag BNPs sensor was able to detect mercury (II) in aqueous solution, visibly changing from brownish-orange to purple. The linear relationships of the UV-visible spectrometry demonstrate that the Au-Ag BNPs-based colorimetric sensor can be used for the quantitative analysis of mercury (II) in the range of 0.5-80 mg L^-1, with the correlation coefficient, r² = 0.9818. The limit of detection (LOD) of mercury (II) was found to be 0.526 + 0.001 mg L^-1. The BNPs is also verified to have a good practical applicability for mercury (II) detection in the real samples.

Ecofriendly ruthenium-containing nanomaterials: synthesis, characterization, electrochemistry, bioactivity and catalysis

Among transition metals, ruthenium being an in-demand element along with its complexes with multidimensional applications in biology, catalysis (especially photocatalysis), and several other aspects of industrial materials, is lacking regards for the potential aspect of its nanoparticles. In the modern synthetic scenario, green synthesis of novel ruthenium nanoparticles for the development of novel materials with potential applications has become a focus. Ru-containing nanomaterials (Ru-cNMs) combined with metals like platinum and palladium or with non-metals like phosphorus and oxygen have shown applications as an anticancer, antimicrobial, and antioxidant agents along with wide-ranging catalytic applications. Reduction of Ru salts using biomaterials including plants etc. has emerged enabling the synthesis of Ru-cNMs. In this context, authors realize that poor availability of literature in this area of research seems to be one of the major handicaps that perhaps could be limiting its attractiveness to researchers. Therefore, it was thought worthwhile to present a review article to encourage, guide, and facilitate scientific researches in green ruthenium nanochemistry embodying synthesis, characterization and biological as well as catalytic applications.

Low-Cost Synthesis of Gold Nanoparticles from Reused Traditional Gold Leaf and its Application for Sensitive and Selective Colorimetric Sensing of Creatinine in Urine

Background:

Gold nanoparticles (Au NPs) are normally prepared using standard gold (III) trichloride which is much expensive and irritant. This work is aimed at demonstrating simple and low-cost synthesis of Au NPs from the reused traditional gold leaf which is cost-free and less toxic.

Methods:

The reused gold leaf was donated by the local temple. It was digested and used as the precursor for the preparation of the Au NPs by Turkevich method. Poly (vinyl alcohol) (PVA) was employed as a stabilizer. The as-prepared Au NPs were applied for the colorimetric determination of creatinine in urine without any sample pretreatment.

Results:

Long-term stability of the gold colloids was achieved for at least 3 months. Morphology and purity of the as-prepared Au NPs were the same as the ones prepared from standard gold (III) salt and standard gold foil. Colorimetric response of the Au NPs was linear to the standard creatinine up to 200 mg L-1. The limit of detection (0.16 mg L-1 or 1.41 μM) was enough sensitive for urinary creatinine detection in patients with kidney disease. Good recoveries (97-108%) and fast analysis time (3 min) were achieved. The developed method was successfully validated against the HPLC method.

Conclusion:

Facile and cost-effective synthesis of the Au NPs from the reused traditional gold leaf, was accomplished. The as-prepared Au NPs were successfully applied for the determination of urinary creatinine with high sensitivity and selectivity.

Assessing the range of enzymatic and oxidative tunability for biosensor design

Development of multi-functional materials and biosensors that can achieve an in situ response designed by the user is a current need in the biomaterials field, especially in complex biological environments, such as inflammation, where multiple enzymatic and oxidative signals are present. In the past decade, there has been extensive research and development of materials chemistries for detecting and monitoring enzymatic activity, as well as for releasing therapeutic and diagnostic agents in regions undergoing oxidative stress. However, there has been limited development of materials in the context of enzymatic and oxidative triggers together, despite their closely tied and overlapping mechanisms. With research focusing on enzymatically and oxidatively triggered materials separately, these systems may be inadequate in monitoring the complexity of inflammatory environments, thus limiting in vivo translatability and diagnostic accuracy. The intention of this review is to highlight a variety of enzymatically and oxidatively triggered materials chemistries to draw attention to the range of synthetic tunability available for the construction of novel biosensors with a spectrum of programmed responses. We focus our discussion on several types of macromolecular sensors, generally classified by the causative material response driving ultimate signal detection. This includes sensing based on degradative processes, conformational changes, supramolecular assembly/disassembly, and nanomaterial interactions, among others. We see each of these classes providing valuable tools toward coalescing current gaps in the biosensing field regarding specificity, selectivity, sensitivity, and flexibility in application. Additionally, by considering the materials chemistry of enzymatically and oxidatively triggered biomaterials in tandem, we hope to encourage synthesis of new biosensors that capitalize on their synergistic roles and overlapping mechanisms in inflammatory environments for applications in disease diagnosis and monitoring.

Sensitive distance-based paper-based quantification of mercury ions using carbon nanodots and heating-based preconcentration

This article reports the first fluorescent distance-based paper device coupled with an evaporating preconcentration system for determining trace mercury ions (Hg2+) in water. The fluorescent nitrogen-doped carbon dots (NCDs) were synthesized by a one-step microwave method using citric acid and ethylenediamine. The fluorescence turn-off of the NCDs in the presence of Hg2+ was visualized with a common black light, and the distance of the quenched fluorescence correlated to Hg2+ concentration. The optimal conditions for pH, NCD concentration, sample volume, and reaction time were investigated. Heating preconcentration was used to improve the detection limits of the fluorescent distance-based paper device by a factor of 100. Under the optimal conditions, the naked eye limit of detection (LOD) was 5 μg L-1 Hg2+. This LOD is sufficient for monitoring drinking water where the maximum allowable mercury level is 6 μg L-1 as established by the World Health Organization (WHO). The fluorescent distance-based paper device was successfully applied for Hg2+ quantification in water samples without interference from other cations. The proposed method provides several advantages over atomic absorption spectroscopy including ease of use, inexpensive material and fabrication, and portability. In addition, the devices are simple to fabricate and have a long shelf-life (>5 months).

Thioglycolic Acid FTIR Spectra on Ag2S Quantum Dots Interfaces

The mechanism features of colloidal quantum dots (QDs) passivation with thioglycolic acid molecules (TGA) for cases of different luminescent properties is considered using FTIR. This problem is considered based on FTIR spectra analysis for various ionic forms of TGA. Experimental TGA molecules FTIR spectra is interpreted, basing on the data on modeling of TGA vibrational modes, realized in the framework of density functional method (DFT /B3LYP/6-31+G(d)) taking into account the vibrations anharmonicity of every functional group. This approach provides a significant improvement in the agreement between the experimental and calculated data. FTIR spectra of Ag2S/TGA QDs with exciton and recombination luminescence are differ from each other and B “freeB” TGA molecules. The ν(S−H) TGA peak (2559 cm−1) disappears in FTIR spectra of Ag2S/TGA QD samples. This fact indicates the interactions between TGA thiol group and dangling bonds of Ag2S nanocrystals. Ag2S QDs passivation with TGA molecules leads to emergence νas(COO−) (1584 cm−1) and νs(COO−) (1387 cm−1) peaks. It indicates TGA adsorption in ionic form. For Ag2S/TGA QDs with exciton luminescence we observed (a) significant low-frequency shift of νs(COO−) peak from 1388 cm−1 to 1359 cm−1 and high-frequency shift of νas(COO−) peak from 1567 cm−1 to 1581 cm−1; (b) change in the ratio of intensities of νas(COO−) and νs(COO−) vibrations. This feature is caused by the change in the symmetry of TGA molecules due to passivation of Ag2S quantum dots.For Ag2S/TGA QDs with recombination luminescence, the insignificant high-frequency shift of 7–10 cm−1 for νas (COO−) at 1567 cm−1 and low-frequency shift of 3–5 cm−1 for νs (COO−) at 1388 cm−1, probably caused by the interaction of thiol with Ag2S surface is observed. Using FTIR spectra, it was found that IR luminescence photodegradation is also accompanied by changes in the thioglycolic acid molecules, which capped Ag2S QDs. In the case of Ag2S QDs with exciton luminescence, the degradation process is non-reversible. It is accompanied by TGA photodegradation with the formation of α-thiol-substituted acyl radical (S-CH2-CO•) TGA.

G. S, Suvina V, Sakar M, Balakrishna RG. Perovskite nanomaterials as optical and electrochemical sensors

The perovskite family is comprised of a great number of members because of the possible and flexible substitution of numerous ions in its system.

Nanoparticle Delivery and Tumor Vascular Normalization: The Chicken or The Egg?

Tumor-induced angiogenesis has been a significant focus of anti-cancer therapies for several decades. The immature and "leaky" tumor vasculature leads to significant cancer cell intravasation, increasing the metastatic potential, while the disoriented and hypo-perfused tumor vessels hamper the anti-tumor efficacy of immune cells and prevent the efficient diffusion of chemotherapeutic drugs. Therefore, tumor vascular normalization has emerged as a new treatment goal, aiming to provide a mature tumor vasculature, with higher perfusion, decreased cancer cell extravasation, and higher efficacy for anti-cancer therapies. Here we propose an overview of the nanodelivery approaches that target tumor vasculature, aiming to achieve vascular normalization. At the same time, abnormal vascular architecture and leaky tumor vessels have been the cornerstone for nanodelivery approaches through the enhanced permeability and retention (EPR) effect. Vascular normalization presents new opportunities and requirements for efficient nanoparticle delivery against the tumor cells and overall improved anti-cancer therapies.

Role of Emissive and Non-Emissive Complex Formations in Photoinduced Electron Transfer Reaction of CdTe Quantum Dots

Bimolecular photoinduced electron transfer (PET) from excited state CdTe quantum dot (QD*) to an electron deficient molecule 2,4-dinitrotoluene (DNT) is studied in toluene. We observed two types of QD-DNT complex formations; (i) non-emissive complex, in which DNT is embedded deep inside the surface polymer layer of QD and (ii) emissive complex, in which DNT molecules are attached to QDs but approach to the QD core is shielded by polymer layer. Because of its non-emissive nature, the lifetime of QD is not affected by dark complex formation, though the steady-state emission is greatly quenched. However, emissive complex formation causes both, lifetime and steady-state emission quenching. In our fitting model, consideration of Poisson distribution of the attached quencher (DNT) molecules at QD surface enables a comprehensive fitting to our time resolved data. QD-DNT complex formation was confirmed by an isothermal titration calorimetry (ITC) study. Fitting to the time resolved data using a stochastic kinetic model shows moderate increase (0.05 ns^-1 to 0.072 ns^-1 ) of intrinsic quenching rate with increasing the QD particle size (from ≈3.2 nm to ≈5.2 nm). Our fitting also reveals that the number of DNT molecules attached to a single QD increases from ≈0.1-0.2 to ≈1.2-1.7, as the DNT concentration is increased from ≈1 mm to 17.5 mm. Complex formation at higher quencher concentration assures that the observed PET kinetics is a thermodynamically controlled process where solvent diffusion has no role on it.

Zinc(II) salphen complex-based fluorescence optical sensor for biogenic amine detection

Biogenic amines have attracted interest among researchers because of their importance as biomarkers in determining the quality of food freshness in the food industry. A rapid and simple technique that is able to detect biogenic amines is needed. In this work, a new optical sensing material for one of the biogenic amines, histamine, based on a new zinc(II) salphen complex was developed. The binding of zinc(II) complexes without an electron-withdrawing group (complex 1) and with electron-withdrawing groups (F, complex 2; Cl, complex 3) to histamine resulted in enhancement of fluorescence. All complexes exhibited high affinity for histamine [binding constant of (7.14 ± 0.80) × 10⁴, (3.33 ± 0.03) × 10⁵, and (2.35 ± 0.14) × 10⁵ M^-1, respectively]. Complex 2 was chosen as the sensing material for further development of an optical sensor for biogenic amines in the following step since it displayed enhanced optical properties in comparison with complexes 1 and 3. The optical sensor for biogenic amines used silica microparticles as the immobilisation support and histamine as the analyte. The optical sensor had a limit of detection for histamine of 4.4 × 10^-12 M, with a linear working range between 1.0 × 10^-11 and 1.0 × 10^-6 M (R² = 0.9844). The sensor showed good reproducibility, with a low relative standard deviation (5.5 %). In addition, the sensor exhibited good selectivity towards histamine and cadaverine over other amines, such as 1,2-phenylenediamine, triethylamine, and trimethylamine. Recovery and real sample studies suggested that complex 2 could be a promising biogenic amine optical sensing material that can be applied in the food industry, especially in controlling the safety of food for it to remain fresh and healthy for consumption.