Self-healing multilayer polyelectrolyte composite film with chitosan and poly(acrylic acid)

Design and application of self-healable polymeric films and coatings for smart food packaging

Smart packaging materials enable active control of parameters that potentially influence the quality of a packaged food product. One type of these that have attracted extensive interest is self-healable films and coatings, which show the elegant, autonomous crack repairing ability upon the presence of appropriate stimuli. They exhibit increased durability and effectively lengthen the usage lifespan of the package. Over the years, extensive efforts have been paid to the design and development of polymeric materials that show self-healing properties; however, till now most of the discussions focus on the design of self-healable hydrogels. Efforts devoted to delineating related advances in the context of polymeric films and coatings are scant, not to mention works reviewing the use of self-healable polymeric materials for smart food packaging. This article fills this gap by offering a review of not only the major strategies for fabrication of self-healable polymeric films and coatings but also the mechanisms of the self-healing process. It is hoped that this article cannot only provide a snapshot of the recent development of self-healable food packaging materials, but insights into the optimization and design of new polymeric films and coatings with self-healing properties can also be gained for future research.

Dealcoholization of Unfiltered and Filtered Lager Beer by Hollow Fiber Polyelectrolyte Multilayer Nanofiltration Membranes-The Effect of Ion Rejection

Membrane-based beverage dealcoholization is a successful process for producing low- and non-alcoholic beer and represents a fast-growing industry. Polyamide NF and RO membranes are commonly applied for this process. Polyelectrolyte multilayer (PEM) NF membranes are emerging as industrially relevant species, and their unique properties (usually hollow fiber geometry, high and tunable selectivity, low fouling) underlines the importance of testing them in the food industry as well. To test PEM NF membranes for beer dealcoholization at a small pilot scale, we dealcoholized filtered and unfiltered lager beer with the tightest available commercial polyelectrolyte multilayer NF membrane (NX Filtration dNF40), which has a MWCO = 400 Da, which is quite high for these purposes. Dealcoholization is possible with a reasonable flux (10 L/m²h) at low pressures (5-8.6 bar) with a real extract loss of 15-18% and an alcohol passage of ~100%. Inorganic salt passage is high (which is typical for PEM NF membranes), which greatly affected beer flavor. During the dealcoholization process, the membrane underwent changes which substantially increased its salt rejection values (MgSO₄ passage decreased fourfold) while permeance loss was minimal (less than 10%). According to our sensory evaluation, the process yielded an acceptable tasting beer which could be greatly enhanced by the addition of the lost salts and glycerol.

Quality assessment of lemon (Citrus aurantifolia, swingle) coated with self-healed multilayer films based on chitosan/carboxymethyl cellulose under cold storage conditions

The polyelectrolyte multilayer self-healing coating film of chitosan and carboxymethyl cellulose (PEM-SH) tended to maintain high sensory quality and control physiological and pathological decay of lemon fruits under cold storage. The PEM-SH film was characterized by ATR-IR, XRD, X-ray photoelectron spectroscopy, SEM analysis, swelling ratio, self-healing, and mechanical characteristics. The 3-layered film (3L) exhibited the optimum barrier properties; WVP: 3.32 ± 0.06 g. mm. k Pa-1.h-1.m-2 and GTR: 0.256 ± 0.032 cc.M-2.day-1. The moisture sorption isotherm data were fitted with BET, GAB, and Peleg models and three models showed applicability. The coated fruits exhibit superior features of fruit quality such as reduced weight loss %, respiration rate, and decay symptoms appearance. The 3L-coated fruit showed the lower pectinase enzyme activity (0.689 Ug-1 FW) up to 60 days. As well as, increased total soluble solids, keeping vitamin C of loss and decreasing percentage acidity of juice up to 60 days.

Ion-Specific and Solvent Effects on PDADMA–PSS Complexation and Multilayer Formation

Among various parameters that influence the formation of polyelectrolyte complexes and multilayers, special emphasis should be placed on ion-specific and solvent effects. In our study, we systematically examined the above-mentioned effects on poly(diallyldimethylammonium chloride) (PDADMACl)-sodium poly(4-styrenesulfonate) (NaPSS) complexation in solution and at the surface by means of dynamic light scattering, ellipsometry and atomic force microscopy measurements. As solvents, we used water and water/ethanol mixture. The obtained results confirm the importance of ion-specific and solvent effects on complexes prepared in solution, as well as on multilayers built up on a silica surface. The experiments in mixed solvent solution showed that at a higher ethanol mole fraction, the decrease in monomer titrant to titrand ratio, at which the increase in the size of complexes is observed, takes place. The difference between chloride and bromide ions was more pronounced at a higher mole fraction of ethanol and in the case of positive complex formation, suggesting that the larger amount of bromide ions could be condensed to the polycation chain. These findings are in accordance with the results we obtained for polyelectrolyte multilayers and could be helpful for designing polyelectrolyte multilayers with tuned properties needed for various applications, primarily in the field of biomedicine.

Dual pH-/thermo-responsive chitosan-based hydrogels prepared using "click" chemistry for colon-targeted drug delivery applications

A dual pH-/thermo-responsive hydrogel was designed based on a polyelectrolyte complex of polyacrylic acid (PAA) and norbornene-functionalized chitosan (CsNb), which was synergized with chemical crosslinking using bistetrazine-poly(N-isopropyl acrylamide) (bisTz-PNIPAM). The thermo-responsive polymeric crosslinker, bisTz-PNIPAM, was synthesized via reversible addition-fragmentation transfer polymerization of NIPAM. FTIR, XRD, rheological and morphological analyses demonstrated the successful formation of the polyelectrolyte network. The highly porous structure generated through the in-situ "click" reaction between Tz and Nb resulted in a higher drug loading (29.35 %). The hydrogel (COOH/NH₂ mole ratio of 3:1) exhibited limited drug release (8.5 %) of 5-ASA at a pH of 2.2, but it provided an almost complete release (92 %) at pH 7.4 and 37 °C within 48 h due to the pH responsiveness of PAA, hydrogel porosity, and shrinkage behavior of PNIPAM. The hydrogels were biodegradable and non-toxic against human fibroblast cells, suggesting their considerable potential for a colon-targeted drug delivery system.

Highly stretchable and self-healing cellulose nanofiber-mediated conductive hydrogel towards strain sensing application

HYPOTHESIS

Hydrogel-based sensors have attracted considerable attention due to potential opportunities in human health monitoring when both mechanical flexibility and sensing ability are required. Therefore, the integration of excellent mechanical properties, electrical conductivity and self-healing properties into hydrogels may improve the application range and durability of hydrogel-based sensors.

EXPERIMENTS

A novel composite hydrogel composed of polyaniline (PANI), polyacrylic acid (PAA) and 2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO)-oxidized cellulose nanofibrils (TOCNFs) was designed. The viscoelastic, mechanical, conductive, self-healing and sensing properties of hydrogels were studied.

FINDINGS

The TOCNF/PANI/PAA hydrogel exhibits a fracture strain of 982%, tensile strength of 74.98 kPa and electrical conductivity of 3.95 S m^-1, as well as good mechanical and electrical self-healing properties within 6 h at ambient temperature without applying any stimuli. Furthermore, owing to the high sensitivity of the TOCNF/PANI/PAA-0.6 hydrogel-based strain sensor (gauge factor, GF = 8.0), the sensor can accurately and rapidly detect large-scale motion and subtle localized activity. The proposed composite hydrogel is as a promising material for use as soft wearable sensors for health monitoring and smart robotics applications.

AgNPs Ornamented Modified Bacterial Cellulose Based Self-Healable L-B-L Assembly via a Schiff Base Reaction: A Potential Wound Healing Patch

A layer-by-layer (L-B-L) bacterial cellulose (BC)-based transdermal patch has been prepared via a Schiff base reaction. The L-B-L assembly consisting of covalently cross-linked ethylene diamine-modified carboxymethylated BC isolated from the Glucanoacetobacter xylinus (MTCC7795) bacterial strain and aldehyde-modified pectin formed via a Schiff base reaction. The presence of the imine bond assists the self-healing process after being scratched in the presence of a pH 7.4 buffer solution monitored via optical microscopy, atomic force microscopy, and tensile strength analyses. The formation of the L-B-L assembly was confirmed using field-emission scanning electron microscopy (FESEM) analysis. Simultaneously, water swelling and deswelling studies were carried out to test its water retention efficiency. The presence of silver nanoparticles (AgNPs) has been confirmed by ultraviolet-visible spectroscopy and FESEM analyses. The antimicrobial activity of the AgNPs-incorporated transdermal patch has been examined over Staphylococcus aureus and Escherichia coli using the zone of inhibition method. Additionally, the cell viability assay was performed using the fluorescent dyes 4',6-diamidino-2-phenylindole and propidium iodide. The AgNPs in the L-B-L assembly showed antimicrobial property against both types of bacteria. The cytotoxicity and wound healing property of the patch system have been studied over NIH 3T3 fibroblast and A549 epithelial cell lines. The L-B-L film also influenced the wound healing process of these two cell lines.

Basic Approaches to the Design of Intrinsic Self-Healing Polymers for Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) as a revolutionary system for harvesting mechanical energy have demonstrated high vitality and great advantage, which open up great prospects for their application in various areas of the society of the future. The past few years have seen exponential growth in many new classes of self-healing polymers (SHPs) for TENGs. This review presents and evaluates the SHP range for TENGs, and also attempts to assess the impact of modern polymer chemistry on the development of advanced materials for TENGs. Among the most widely used SHPs for TENGs, the analysis of non-covalent (hydrogen bond, metal-ligand bond), covalent (imine bond, disulfide bond, borate bond) and multiple bond-based SHPs in TENGs has been performed. Particular attention is paid to the use of SHPs with shape memory as components of TENGs. Finally, the problems and prospects for the development of SHPs for TENGs are outlined.

Separation of Volatile Fatty Acids from Model Anaerobic Effluents Using Various Membrane Technologies

Effluents of anaerobic processes still contain valuable components, among which volatile fatty acids (VFAs) can be regarded and should be recovered and/or used further in applications such as microbial electrochemical technology to generate energy/energy carriers. To accomplish the separation of VFAs from waste liquors, various membrane-based solutions applying different transport mechanisms and traits are available, including pressure-driven nanofiltration (NF) and reverse osmosis (RO) which are capable to clarify, fractionate and concentrate salts and organics. Besides, emerging techniques using a membrane such as forward osmosis (FO) and supported liquid membrane (SILM) technology can be taken into consideration for VFA separation. In this work, we evaluate these four various downstream methods (NF, RO, FO and SILM) to determine the best one, comparatively, for enriching VFAs from pH-varied model solutions composed of acetic, butyric and propionic acids in different concentrations. The assessment of the separation experiments was supported by statistical examination to draw more solid conclusions. Accordingly, it turned out that all methods can separate VFAs from the model solution. The highest average retention was achieved by RO (84% at the applied transmembrane pressure of 6 bar), while NF provided the highest permeance (6.5 L/m2hbar) and a high selectivity between different VFAs.

An antibacterial and biocompatible multilayer biomedical coating capable of healing damages

Besides the excellent biocompatibility and high antibacterial property, multifunctional biomedical coatings with a long service time is highly desirable for extended applications, which is still an ongoing challenge. The self-healing property enables new directions for effectively prolonging their service life and significantly improving their reliability. Herein, an efficient and simple method is used to facilely prepare antibacterial, biocompatibile multilayer polyelectrolyte coatings, which are capable of healing damages. The synthetic strategy involves the alternate deposition of Chitosan (CS) and sodium carboxymethyl cellulose (CMC) via the layer-by-layer (LBL) self-assembly technique. The CS/CMC multilayer polyelectrolyte coating features high antibacterial property, fast and efficient self-healing property, and excellent biocompatibility. These features allow the CS/CMC polyelectrolyte coating to have extended lifespan and to be highly promising for novel functional stent coating applications.

A CS/CMC multilayer polyelectrolyte coating was developed, which features fast and efficient self-healing property, high antibacterial property, and excellent biocompatibility.

Self-healing and shape memory metallopolymers: state-of-the-art and future perspectives

Recent achievements and problems associated with the use of metallopolymers as self-healing and shape memory materials are presented and evaluated.

Self-Healing Hydrogels: The Next Paradigm Shift in Tissue Engineering?

Given their durability and long-term stability, self-healable hydrogels have, in the past few years, emerged as promising replacements for the many brittle hydrogels currently being used in preclinical or clinical trials. To this end, the incompatibility between hydrogel toughness and rapid self-healing remains unaddressed, and therefore most of the self-healable hydrogels still face serious challenges within the dynamic and mechanically demanding environment of human organs/tissues. Furthermore, depending on the target tissue, the self-healing hydrogels must comply with a wide range of properties including electrical, biological, and mechanical. Notably, the incorporation of nanomaterials into double-network hydrogels is showing great promise as a feasible way to generate self-healable hydrogels with the above-mentioned attributes. Here, the recent progress in the development of multifunctional and self-healable hydrogels for various tissue engineering applications is discussed in detail. Their potential applications within the rapidly expanding areas of bioelectronic hydrogels, cyborganics, and soft robotics are further highlighted.

Evaluation of Single Hydrogel Nanofiber Mechanics Using Persistence Length Analysis

Polyelectrolyte hydrogel fibers can mimic the extracellular matrix and be used for tissue scaffolding. Mechanical properties of polyelectrolyte nanofibers are crucial in manipulating cell behavior, which metal ions have been found to enable tuning. While metal ions play an important role in manipulating the mechanical properties of the fibers, evaluating the mechanical properties of a single hydrated hydrogel fiber remains a challenging task and a more detailed understanding of how ions modulate the mechanical properties of individual polyelectrolyte polymers is still lacking. In this study, dark-field microscopy and persistence length analysis help directly evaluate fiber mechanics using electrospun fibers of poly(acrylic acid) (PAA), chitosan (CS), and ferric ions as a model system. By comparing the persistence length and estimated Young's modulus of different nanofibers, we demonstrate that persistence length analysis is a viable approach to evaluate mechanical properties of hydrated fibers. Ferric ions were found to create shorter and stiffer nanofibers, with Young's modulus estimated at a few kilopascals. Ferric ions, at low concentration, reduce the Young's modulus of PAA and PAA/CS fibers through the interaction between ferric ions and carboxylate groups. Such interaction was further supported by nanoscale infrared spectroscopy studies of PAA and PAA/CS fibers with different concentrations of ferric ions.

Bio-inspired self-healing structural color hydrogel

Biologically inspired self-healing structural color hydrogels were developed by adding a glucose oxidase (GOX)- and catalase (CAT)-filled glutaraldehyde cross-linked BSA hydrogel into methacrylated gelatin (GelMA) inverse opal scaffolds. The composite hydrogel materials with the polymerized GelMA scaffold could maintain the stability of an inverse opal structure and its resultant structural colors, whereas the protein hydrogel filler could impart self-healing capability through the reversible covalent attachment of glutaraldehyde to lysine residues of BSA and enzyme additives. A series of unprecedented structural color materials could be created by assembling and healing the elements of the composite hydrogel. In addition, as both the GelMA and the protein hydrogels were derived from organisms, the composite materials presented high biocompatibility and plasticity. These features of self-healing structural color hydrogels make them excellent functional materials for different applications.

Determination of the diffusion coefficient of hydrogen ion in hydrogels

The role of diffusion in chemical pattern formation has been widely studied due to the great diversity of patterns emerging in reaction-diffusion systems, particularly in H⁺-autocatalytic reactions where hydrogels are applied to avoid convection. A custom-made conductometric cell is designed to measure the effective diffusion coefficient of a pair of strong electrolytes containing sodium ions or hydrogen ions with a common anion. This together with the individual diffusion coefficient for sodium ions, obtained from PFGSE-NMR spectroscopy, allows the determination of the diffusion coefficient of hydrogen ions in hydrogels. Numerical calculations are also performed to study the behavior of a diffusion-migration model describing ionic diffusion in our system. The method we present for one particular case may be extended for various hydrogels and diffusing ions (such as hydroxide) which are relevant e.g. for the development of pH-regulated self-healing mechanisms and hydrogels used for drug delivery.

Self-healing polyelectrolyte multilayered coating for anticorrosion on carbon paper

Ideally, if the corrosion resistance coating on carbon paper (CP) can be endowed with the self-healing property, the service life and the reliability of the carbon paper will be greatly increased as the gas diffusion layer. In this paper, different cycles of s branched poly (ethyleneimine) (bPEI) and poly (acrylic acid) (PAA) were modified on the surface of the carbon paper via layer-by-layer (LbL) self-assembly technology. The prepared polyelectrolyte multilayered coatings can not only protect the carbon fiber from corrosion, but also take advantages of the surrounding water to quickly repair themselves after damaged. The effects of the assembly cycles on morphology, resistance, air permeability and the contact angle of carbon papers were investigated, then the differences of the carbon papers in electrolysis process were explored. The results reveal that all the prepared coatings can protect carbon papers from corrosion, while when the assembly cycles was 10, the coatings are most efficient.

Facile one-pot synthesis and self-healing properties of tetrazole-based metallopolymers in the presence of iron salts

Self-healing MPs were prepared with tetrazole group for coordinating with FeCl₃·6H₂O by one-pot method. This simple and efficient synthesis will provide a green route for preparing excellent self-healing materials.

Self-Healing Textile: Enzyme Encapsulated Layer-by-Layer Structural Proteins

Self-healing materials, which enable an autonomous repair response to damage, are highly desirable for the long-term reliability of woven or nonwoven textiles. Polyelectrolyte layer-by-layer (LbL) films are of considerable interest as self-healing coatings due to the mobility of the components comprising the film. In this work mechanically stable self-healing films were fabricated through construction of a polyelectrolyte LbL film containing squid ring teeth (SRT) proteins. SRTs are structural proteins with unique self-healing properties and high elastic modulus in both dry and wet conditions (>2 GPa) due to their semicrystalline architecture. We demonstrate LbL construction of multilayers containing native and recombinant SRT proteins capable of self-healing defects. Additionally, we show these films are capable of utilizing functional biomolecules by incorporating an enzyme into the SRT multilayer. Urease was chosen as a model enzyme of interest to test its activity via fluorescence assay. Successful construction of the SRT films demonstrates the use of mechanically stable self-healing coatings, which can incorporate biomolecules for more complex protective functionalities for advanced functional fabrics.

Coating Strategies Using Layer-by-layer Deposition for Cell Encapsulation

The layer-by-layer (LbL) deposition technique is widely used to develop multilayered films based on the directed assembly of complementary materials. In the last decade, thin multilayers prepared by LbL deposition have been applied in biological fields, namely, for cellular encapsulation, due to their versatile processing and tunable properties. Their use was suggested as an alternative approach to overcome the drawbacks of bulk hydrogels, for endocrine cells transplantation or tissue engineering approaches, as effective cytoprotective agents, or as a way to control cell division. Nanostructured multilayered materials are currently used in the nanomodification of the surfaces of single cells and cell aggregates, and are also suitable as coatings for cell-laden hydrogels or other biomaterials, which may later be transformed to highly permeable hollow capsules. In this Focus Review, we discuss the applications of LbL cell encapsulation in distinct fields, including cell therapy, regenerative medicine, and biotechnological applications. Insights regarding practical aspects required to employ LbL for cell encapsulation are also provided.

Mechanical Properties, Cytocompatibility and Manufacturability of Chitosan:PEGDA Hybrid-Gel Scaffolds by Stereolithography

Extracellular matrix mimetic hydrogels which hybridize synthetic and natural polymers offer molecularly-tailored, bioactive properties and tunable mechanical strength. In addition, 3D bioprinting by stereolithography allows fabrication of internal pores and defined macroscopic shapes. In this study, we formulated a hybrid biocompatible resin using natural and synthetic polymers (chitosan and polyethylene glycol diacrylate (PEGDA), respectively) by controlling molecular weight of chitosan, feed-ratios, and photo-initiator concentration. Ear-shaped, hybrid scaffolds were fabricated by a stereolithographic method using a 405 nm laser. Hybrid hydrogel scaffolds of chitosan (50-190 kDa) and PEGDA (575 Da) were mixed at varying feed-ratios. Some of the cationic, amino groups of chitosan were neutralized by dialysis in acidic solution containing chitosan in excess of sodium acetate solution to inhibit quenching of newly formed photoradicals. A feed-ratio of 1:7.5 was found to be the most appropriate of the formulations considered in this study in terms of mechanical properties, cell adhesion, and printability. The biofabricated hybrid scaffold showed interconnected, homogeneous pores with a nominal pore size of 50 µm and an elastic modulus of ~400 kPa. Moreover, long-term cell viability and cell spreading was observed via actin filament staining. Printability of the biocompatible resin was confirmed by printing thresholded MR images of an ear and the feed ratio of 1:7.5 provided the most faithful reproduction of the shape. To the best of our knowledge, this is the first report of stereolithographic printing hybridizing cell-adhesive properties of chitosan with mechanical robustness of PEG in scaffolds suitable for repair of complex tissue geometries, such as those of the human ear.

Humidity responsive self-healing based on intermolecular hydrogen bonding and metal–ligand coordination

Self-healing process occurring when a self-healing Co–CS/PAA PEM film is integrated (I), damaged (II), self-healing (III), and self-healed (IV).

Highly transparent and self-healing films based on the dynamic Schiff base linkage

In this study, we report highly transparent self-healing films based on Schiff base linkages between DF-PEG and CS via a layer-by-layer technique.