Silver nanoparticle based coatings enhance adipogenesis compared to osteogenesis in human mesenchymal stem cells through oxidative stress

Nanoparticles and Mesenchymal Stem Cell (MSC) Therapy for Cancer Treatment: Focus on Nanocarriers and a si-RNA CXCR4 Chemokine Blocker as Strategies for Tumor Eradication In Vitro and In Vivo

Mesenchymal stem cells (MSCs) have a high tropism for the hypoxic microenvironment of tumors. The combination of nanoparticles in MSCs decreases tumor growth in vitro as well as in rodent models of cancers in vivo. Covalent conjugation of nanoparticles with the surface of MSCs can significantly increase the drug load delivery in tumor sites. Nanoparticle-based anti-angiogenic systems (gold, silica and silicates, diamond, silver, and copper) prevented tumor growth in vitro. For example, glycolic acid polyconjugates enhance nanoparticle drug delivery and have been reported in human MSCs. Labeling with fluorescent particles (coumarin-6 dye) identified tumor cells using fluorescence emission in tissues; the conjugation of different types of nanoparticles in MSCs ensured success and feasibility by tracking the migration and its intratumor detection using non-invasive imaging techniques. However, the biosafety and efficacy; long-term stability of nanoparticles, and the capacity for drug release must be improved for clinical implementation. In fact, MSCs are vehicles for drug delivery with nanoparticles and also show low toxicity but inefficient accumulation in tumor sites by clearance of reticuloendothelial organs. To solve these problems, the internalization or conjugation of drug-loaded nanoparticles should be improved in MSCs. Finally, CXCR4 may prove to be a promising target for immunotherapy and cancer treatment since the delivery of siRNA to knock down this alpha chemokine receptor or CXCR4 antagonism has been shown to disrupt tumor-stromal interactions.

Recapitulating Antioxidant and Antibacterial Compounds into a Package for Tissue Regeneration: Dual Function Materials with Synergistic Effect

Oxidative damage and infection can prevent or delay tissue repair. Moreover, infection reinforces reactive oxygen species (ROS) formation, which makes the wound's condition even worse. Therefore, the need for antioxidant and antibacterial agents is felt for tissue regeneration. There are emerging up-and-coming biomaterials that recapitulate both properties into a package, offering an effective solution to turn the wound back into a healing state. In this article, the principles of antioxidant and antibacterial activity are summarized. The review starts with biological aspects, getting the readers to familiarize themselves with tissue barriers against infection. This is followed by the chemistry and mechanism of action of antioxidant and antibacterial materials (dual function). Eventually, the outlook and challenges are underlined to provide where the dual-function biomaterials are and where they are going in the future. It is expected that the present article inspires the designing of dual-function biomaterials to more advanced levels by providing the fundamentals and comparative points of view and paving the clinical way for these materials.

Copper and Zinc Co-doped Titanium Dioxide Nanotubes Arrays on Controlling Nitric Oxide Releasing and Regulating the Inflammatory Responses for Cardiovascular Biomaterials

BACKGROUND

Titanium dioxide (TiO₂) nanotubes arrays have shown tremendous application foreground due to their unique characters of structure and performance. However, the single bio-function is still the limit on cardiovascular biomaterials.

METHODS

The loadability function provides the possibility for the TiO₂ nanotubes arrays to realize composite multifunction. The copper can catalyze the release of nitric oxide to promote the proliferation of endothelium cells and improve the anticoagulant. Also, zinc can adjust the inflammatory responses to improve anti-inflammation.

RESULTS

In this patent work, we co-doped the copper and zinc onto TiO₂ nanotubes arrays to estimate the hemocompatibility, cytocompatibility and responses of inflammation. The results showed that copper and zinc could introduce better multi-biofunctions to the TiO₂ nanotubes arrays for the application in cardiovascular biomaterials.

CONCLUSION

In summary, the NTs@Cu/Zn sample as a new composite material in this study had significant biocompatibility in vascular implantation and can be used as a potential material for polymer- free drug-eluting stents.

A concise review on implications of silver nanoparticles in bone tissue engineering

Skeletal disorders represent a variety of degenerative diseases that affect bone and cartilage homeostasis. The regenerative capacity of bone is affected in osteoporosis, osteoarthritis, rheumatoid arthritis, bone fractures, congenital defects, and bone cancers. There is no viable, non-invasive treatment option and bone regeneration requires surgical intervention with the implantation of bone grafts. Incorporating nanoparticles in bone grafts have improved fracture healing by providing fine structures for bone tissue engineering. It is currently a revolutionary finding in the field of regenerative medicine. Silver nanoparticles (AgNPs) have garnered particular attention due to their well-known anti-microbial and potential osteoinductive properties. In addition, AgNPs have been demonstrated to regulate the proliferation and differentiation of mesenchymal stem cells (MSCs) involved in bone regeneration. Furthermore, AgNPs have shown toxicity towards cancer cells derived from bone. In the last decade, there have been multiple studies focusing on the effect of nanoparticles on the proliferation and/or differentiation of MSCs and bone cancer cells; however, the specific studies with AgNPs are limited. Although the reported investigations show promising in vitro and in vivo potential of AgNPs for application in bone regeneration, more studies are required to ensure their implications in bone tissue engineering. This review aims to highlight the current advances related to the production of AgNPs and their effect on MSCs and bone cancer cells, which will potentiate their possible implications in orthopedics. Moreover, this review article evaluates the future of AgNPs in bone tissue engineering.

Advantages and prospects of stem cells in nanotoxicology

Nanomaterials have been widely used in many fields, especially in biomedical and stem cell therapy. However, the potential risks associated with nanomaterials applications are also gradually increasing. Therefore, effective and robust toxicology models are critical to evaluate the developmental toxicity of nanomaterials. The development of stem cell research provides a new idea of developmental toxicology. Recently, many researchers actively investigated the effects of nanomaterials with different sizes and surface modifications on various stem cells (such as embryonic stem cells (ESCs), adult stem cells, etc.) to study the toxic effects and toxic mechanisms. In this review, we summarized the effects of nanomaterials on the proliferation and differentiation of ESCs, mesenchymal stem cells and neural stem cells. Moreover, we discussed the advantages of stem cells in nanotoxicology compared with other cell lines. Finally, combined with the latest research methods and new molecular mechanisms, we analyzed the application of stem cells in nanotoxicology.

Regulation of Stem Cell Differentiation by Inorganic Nanomaterials: Recent Advances in Regenerative Medicine

Transplanting stem cells with the abilities of self-renewal and differentiation is one of the most effective ways to treat many diseases. In order to optimize the therapeutic effect of stem cell transplantation, it is necessary to intervene in stem cell differentiation. Inorganic nanomaterials (NMs), due to their unique physical and chemical properties, can affect the adhesion, migration, proliferation and differentiation of stem cells. In addition, inorganic NMs have huge specific surface area and modifiability that can be used as vectors to transport plasmids, proteins or small molecules to further interfere with the fate of stem cells. In this mini review, we summarized the recent advances of common inorganic NMs in regulating stem cells differentiation, and the effects of the stiffness, size and shape of inorganic NMs on stem cell behavior were discussed. In addition, we further analyzed the existing obstacles and corresponding perspectives of the application of inorganic NMs in the field of stem cells.

Bismuth-based nanoparticles impair adipogenic differentiation of human adipose-derived mesenchymal stem cells

Bismuth-based nanoparticles (BiNPs) have attracted attention for their potential biomedical applications. However, there is a lack of information concerning their interaction with biological systems. In this study, it was investigated the effect of physically synthesized BiNPs to human adipose-derived stem cells (ADSCs). We first evaluated the influence of BiNPs on cell viability, cell morphology, mitochondrial function and cell proliferation. Further, the impact of BiNPs on adipogenic differentiation was also explored. Cytotoxicity assays have demonstrated that BiNPs did not reduce relative cell viability of ADSC except at the highest tested concentration (345 μg/ml). Analysis of cell morphology performed by transmission electron microscopy confirmed that BiNPs induced cell damage only at a high concentration (302.24 μg/ml), equivalent to IC₅₀ concentration. Moreover, BiNPs exposure increased the expression of the cell proliferation marker Ki-67 and the incorporation of the thymidine analogue EdU into cell DNA, suggesting that these nanoparticles could be stimulating ADSC proliferation. BiNPs also increased the mitochondrial membrane potential. Furthermore, BiNPs reduced ADSC adipogenic differentiation as measured by lipid droplet accumulation and mRNA expression levels of the specific adipogenesis biomarkers PPARγ, C/EPBɑ and FABP4. Thus, BiNPs affect the nonspecific (viability, proliferation and mitochondrial activity) and specific (adipogenesis) cellular mechanisms of ADSCs.

Silver nanoparticles induce the cardiomyogenic differentiation of bone marrow derived mesenchymal stem cells via telomere length extension

Finding new strategies for the treatment of heart failures using stem cells has attracted a lot of attention. Meanwhile, nanotechnology-based approaches to regenerative medicine hypothesize a possible combination of stem cells and nanotechnology in the treatment of diseases. This study aims to investigate the in vitro effect of silver nanoparticles (Ag-NPs) on the cardiomyogenic differentiation of bone marrow-derived mesenchymal stem cells (BM-MSCs) through detection of cardiac markers. For this purpose, MSCs were isolated from bone marrow resident and differentiated to the cardiac cells using a dedicated medium with Ag-NPs. Also, the cardiomyogenic differentiation of BM-MSCs was confirmed using immunocytochemistry. Then, real-time PCR and western blotting assay were used for measuring absolute telomere length (TL) measurement, and gene and protein assessment of the cells, respectively. It was found that 2.5 µg/mL Ag-NPs caused elongation of the telomeres and altered VEGF, C-TnI, VWF, SMA, GATA-4, TERT, and cyclin D protein and gene expression in the cardiomyogenically differentiated BM-MSCs. Also, there was a significant increase in the protein and gene expression of Wnt3 and β-catenin as main components of pathways. We concluded that Ag-NPs could change the in vitro expression of cardiac markers of BM-MSCs via the Wnt3/β-catenin signaling pathway.

pH-Responsive "Smart" Hydrogel for Controlled Delivery of Silver Nanoparticles to Infected Wounds

Persistent wound infections have been a therapeutic challenge for a long time. Current treatment approaches are mostly based on the delivery of antibiotics, but these are not effective for all infections. Here, we report the development of a sensitive pH-responsive hydrogel that can provide controlled, pH-triggered release of silver nanoparticles (AgNPs). This delivery system was designed to sense the environmental pH and trigger the release of AgNPs when the pH changes from acidic to alkaline, as occurs due to the presence of pathogenic bacteria in the wound. Our results show that the prepared hydrogel restricts the release of AgNPs at acidic pH (pH = 4) but substantially amplifies it at alkaline pH (pH = 7.4 and pH = 10). This indicates the potential use of the hydrogel for the on-demand release of Ag+ depending on the environmental pH. In vitro antibacterial studies demonstrated effective elimination of both Gram-negative and positive bacteria. Additionally, the effective antibacterial dose of Ag+ showed no toxicity towards mammalian skin cells. Collectively, this pH-responsive hydrogel presents potential as a promising new material for the treatment of infected wounds.

Gold nanoparticles biosynthesized by Nocardiopsis dassonvillei NCIM 5124 enhance osteogenesis in gingival mesenchymal stem cells

Gold nanoparticles are widely used for biomedical applications owing to their biocompatibility, ease of functionalization and relatively non-toxic nature. In recent years, biogenic nanoparticles have gained attention as an eco-friendly alternative for a variety of applications. In this report, we have synthesized and characterized gold nanoparticles (AuNPs) from an Actinomycete, Nocardiopsis dassonvillei NCIM 5124. The conditions for biosynthesis were optimized (100 mg/ml of cell biomass, 2.5 mM tetrachloroauric acid (HAuCl₄) at 80 °C and incubation time of 25 min) and the nanoparticles were characterized by TEM, SAED, EDS and XRD analysis. The nanoparticles were spherical and ranged in size from 10 to 25 nm. Their interactions with human gingival tissue-derived mesenchymal stem cells (GMSCs) and their potential applications in regenerative medicine were evaluated further. The AuNPs did not display cytotoxicity towards GMSCs when assessed by 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide assay, DNA fragmentation patterns and Annexin V/propidium iodide staining techniques. These AuNPs induced faster cell migration when monitored by the in vitro wound healing assay. The effect of these nanoparticles on osteogenesis of GMSCs was also studied. Based on the results obtained from alkaline phosphatase, Von Kossa staining and Alizarin Red S staining, the AuNPs were seen to positively affect differentiation of GMSCs and enhance mineralization of the synthesized matrix. We therefore conclude that the biogenic, non-toxic AuNPs are of potential relevance for tissue regeneration applications.

Bioactive Surfaces of Polylactide and Silver Nanoparticles for the Prevention of Microbial Contamination

Thanks to its peculiar interactions with biological molecules and structures, metallic silver in the form of silver nanoparticles achieved a remarkable comeback as a potential antimicrobial agent. The antimicrobial use of silver nanoparticles is of clinical importance, as several pathogenic microorganisms developed resistance against various conventional drug treatments. Hence, given the extensive efficiency of silver nanoparticles against drug-sensitive and drug-resistant pathogens, their therapeutic implications were demonstrated in multiple medical applications, such as silver-based dressings, silver-coated biomedical devices and silver-containing nanogels. Bacterial strains possess an intrinsic ability to form well-organized microbial communities, capable of developing adaptive mechanisms to environmental aggression and self-protective pathways against antibiotics. The formation of these mono- or poly-microbial colonies, called biofilms, is closely related with the occurrence of infectious processes which result in severe and chronic pathologies. Therefore, substantial efforts were oriented to the development of new protective coatings for biomedical surfaces, capable of sustaining the physiological processes within human-derived normal cells and to disrupt the microbial contamination and colonization stages. Nanostructured materials based on polylactic acid and silver nanoparticles are herein proposed as bioactive coatings able to prevent the formation of microbial biofilms on biomedical relevant surfaces.

Silver nanoparticles stimulate osteogenesis of human mesenchymal stem cells through activation of autophagy

Aim: Previously, different results have been achieved regarding effects of silver nanoparticles (Ag NPs) on osteogenesis of stem cells and the mechanisms have not been disclosed yet, which are quite important for potential application of Ag NPs in bone reconstruction. Materials & methods: Effects of Ag NPs on osteogenesis of human mesenchymal stem cells (hMSCs) with underlying mechanisms were investigated. Results: Ag NPs at 2.5 and 5 μg/ml increased osteogenic proteins expression and mineralization of hMSCs. Meanwhile, autophagy was activated by Ag NPs and it could be inhibited by 3-methyladenine. Furthermore, osteogenesis induced by Ag NPs could also be reversed by 3-methyladenine. Conclusion: These findings suggest that autophagy is involved in stimulating osteogenesis of hMSCs induced by Ag NPs.

Field Deployable Method for Gold Detection Using Gold Pre-Concentration on Functionalized Surfaces

Keywords: surface chemistry, plasma polymerization, salinization, gold sensing.

Triple PLGA/PCL Scaffold Modification Including Silver Impregnation, Collagen Coating, and Electrospinning Significantly Improve Biocompatibility, Antimicrobial, and Osteogenic Properties for Orofacial Tissue Regeneration

Biodegradable synthetic scaffolds hold great promise for oral and craniofacial guided tissue regeneration and bone regeneration. To overcome the limitations of current scaffold materials in terms of osteogenic and antimicrobial properties, we have developed a novel silver-modified/collagen-coated electrospun poly-lactic-co-glycolic acid/polycaprolactone (PLGA/PCL) scaffold (PP-pDA-Ag-COL) with improved antimicrobial and osteogenic properties. Our novel scaffold was generated by electrospinning a basic PLGA/PCL matrix, followed by silver nanoparticles (AgNPs) impregnation via in situ reduction, polydopamine coating, and then coating by collagen I. The three intermediate materials involved in the fabrication of our scaffolds, namely, PLGA/PCL (PP), PLGA/PCL-polydopamine (PP-pDA), and PLGA/PCL-polydopamine-Ag (PP-pDA-Ag), were used as control scaffolds. Scanning electron micrographs and mechanical testing indicated that the unique three-dimensional structures with randomly oriented nanofibrous electrospun scaffold architectures, the elasticity modulus, and the tensile strength were maintained after modifications. CCK-8 cell proliferation analysis demonstrated that the PP-pDA-Ag-COL scaffold was associated with higher MC3T3 proliferation rates than the three control scaffolds employed. Scanning electron and fluorescence light microscopy illustrated that PP-pDA-Ag-COL scaffolds significantly enhanced MC3T3 cell adhesion compared to the control scaffolds after 12 and 24 h culture, in tandem with the highest β1 integrin expression levels, both at the mRNA level and the protein level. Alkaline phosphatase activity, BMP2, and RUNX2 expression levels of MC3T3 cells cultured on PP-pDA-Ag-COL scaffolds for 7 and 14 days were also significantly higher when compared to controls (P < 0.001). There was a wider antibacterial zone associated in PP-pDA-Ag-COL and PP-pDA-Ag scaffolds versus control scaffolds (P < 0.05), and bacterial fluorescence was reduced on the Ag-modified scaffolds after 24 h inoculation against Staphylococcus aureus and Streptococcus mutans. In a mouse periodontal disease model, the PP-pDA-Ag-COL scaffold enhanced alveolar bone regeneration (31.8%) and was effective for periodontitis treatment. These results demonstrate that our novel PP-pDA-Ag-COL scaffold enhanced biocompatibility and osteogenic and antibacterial properties and has therapeutic potential for alveolar/craniofacial bone regeneration.

Nanoengineered Antibacterial Coatings and Materials: A Perspective

This feature article begins by outlining the problem of infection and its implication on healthcare. The initial introductory section is followed by a description of the four distinct classes of antibacterial coatings and materials, i.e., bacteria repealing, contact killing, releasing and responsive, that were developed over the years by our team and others. Specific examples of each individual class of antibacterial materials and a discussion on the pros and cons of each strategy are provided. The article contains a dedicated section focused on silver nanoparticle based coatings and materials, which have attracted tremendous interest from the scientific and medical communities. The article concludes with the author’s view regarding the future of the field.

Multifunctional Tannic Acid (TA) and Lysozyme (Lys) Films Built Layer by Layer for Potential Application on Implant Coating

A multifunctional (TA/Lys)_n film, featuring good antioxidant property, fast cell attachment at the initial stage, enhanced osteogenesis, and broad-spectrum antibacterial property, was constructed by the layer-by-layer (LBL) method. The building process was monitored by quartz crystal microbalance with dissipation (QCM-D); the physical properties, such as topography, stiffness in dry and liquid state, and conformation of Lys in the film, were thoroughly characterized. These physical properties were modulated by varying the salt concentration at which the film was constructed. The film not only allows for favorable cell attachment and proliferation of preosteoblasts Mc3t3-E1 but also provides antibacterial property against Gram-positive bacteria, S. aureus and M. lysodeikticus, and Gram-negative bacteria, E. coli. It also displays good antioxidant property, which plays a critical role on fast cell attachment at the initial stage.

Graphene Oxide and Lysozyme Ultrathin Films with Strong Antibacterial and Enhanced Osteogenesis

There is a great demand worldwide for bone-related implant materials. The drawbacks of chronic infections and poor bone healing of current implant materials have limited their clinical applications. Functionalizing the implant surfaces with antibacterial and osteogenic films on implant materials provides new opportunities for fabricating novel implant materials. In the present study, an ultrathin (GO/Lys)₈ film of several tens of nanometers was fabricated using a layer-by-layer (LBL) technique with alternative deposition of graphene oxide (GO) and lysozyme (Lys). The deposition of the (GO/Lys) _n film exhibited a successive growth as supported by ellipsometry, UV-vis, and Fourier transform infrared data, and the physical properties (morphology, roughness, and stiffness) of this film were characterized with an atomic force microscope. The ultrathin films exhibited a great effect on bacterium sterilization of Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli and enhanced osteogenic differentiation efficiency, showing the potential application in bone implant coatings. We believe that this LBL assembling strategy will pave the way for fabricating dual-functional surfaces and guide the design of the implanted surfaces in the future.

A bio-inspired, one-step but versatile coating onto various substrates with strong antibacterial and enhanced osteogenesis

It is of great interest to prepare osteogenic and antibacterial coatings for successful implants. Current coating techniques suffer from being time-consuming, substrate material or shape dependence, expensive equipment, environmental pollution, low stability, processes that are difficult to control, etc. Herein, inspired by mussels, we report a one-step and versatile method to fabricate a dual functional coating. The coating is finished in minutes independently of materials or dimensions of substrates. Thus, our coatings exhibit strong antibacterial ability against both Gram-positive bacteria S. aureus, and Gram-negative bacteria E. coli, support the proliferation of dental pulp stem cells (DPSCs), and are powerful for inducing osteogenic differentiation. The universality, facility, rapidness, and mildness of our coating process, which is also environmentally-friendly and cost-effective, points towards potential applications in bone or dental implants.

Uptake and distribution of carboxylated quantum dots in human mesenchymal stem cells: cell growing density matters

BACKGROUND

Human mesenchymal stem cells (MSCs) have drawn much attention in the field of regenerative medicine for their immunomodulatory and anti-inflammatory effects. MSCs possess specific tumor-oriented migration and incorporation highlighting the potential for MSCs to be used as an ideal carrier for anticancer agents. Bone marrow is the main source of MSCs for clinical applications. MSCs tracking in vivo is a critical component of the safety and efficacy evaluation of therapeutic cell products; therefore, cells must be labeled with contrast agents to enable visualization of the MSCs migration in vivo. Due to their unique properties, quantum dots (QDs) are emerging as optimal tools in long-term MSC optical imaging applications. The aim of this study was to investigate the uptake dynamics, cytotoxity, subcellular and extracellular distribution of non-targeted carboxylated quantum dots in human bone marrow MSCs at different cell growing densities.

RESULTS

QDs had no negative impact on MSC viability throughout the experiment and accumulated in all observed cells efficiently; however, in some MSCs QDs induced formation of lipid droplets. At low cell growing densities QDs distribute within MSCs cytoplasm already after 1 h of incubation reaching saturation after 6 h. After 24 h QDs localize mainly in the perinuclear region of the cells in endosomes. Interestingly, in more confluent culture QDs localize mostly outside MSCs. QDs abundantly mark MSC long filopodia-like structures attaching neighboring cells. At high cell density cultivation, we for the first time demonstrated that carboxylated QDs localize in human bone marrow MSC extracellular matrix. Moreover, we observed that average photoluminescence lifetime of QDs distributed in extracellular matrix are longer than lifetimes of QDs entrapped in endocytic vesicles; thus, for the first time showing the possibility to identify and distinguish localization of QDs in various extracellular and intracellular structures using fluorescence-lifetime imaging microscopy without additional staining assays.

CONCLUSION

Carboxylated QDs can be used as nonspecific and effective dye for staining of human bone marrow MSCs and their specific extracellular structures. These results are promising in fundamental stem cell biology as well as in cellular therapy, anticancer drug delivery and tissue engineering.

Potential ecotoxicological effects of antimicrobial surface coatings: a literature survey backed up by analysis of market reports

This review was initiated by the COST action CA15114 AMICI "Anti-Microbial Coating Innovations to prevent infectious diseases," where one important aspect is to analyze ecotoxicological impacts of antimicrobial coatings (AMCs) to ensure their sustainable use. Scopus database was used to collect scientific literature on the types and uses of AMCs, while market reports were used to collect data on production volumes. Special attention was paid on data obtained for the release of the most prevalent ingredients of AMCs into the aqueous phase that was used as the proxy for their possible ecotoxicological effects. Based on the critical analysis of 2,720 papers, it can be concluded that silver-based AMCs are by far the most studied and used coatings followed by those based on titanium, copper, zinc, chitosan and quaternary ammonium compounds. The literature analysis pointed to biomedicine, followed by marine industry, construction industry (paints), food industry and textiles as the main fields of application of AMCs. The published data on ecotoxicological effects of AMCs was scarce, and also only a small number of the papers provided information on release of antimicrobial ingredients from AMCs. The available release data allowed to conclude that silver, copper and zinc are often released in substantial amounts (up to 100%) from the coatings to the aqueous environment. Chitosan and titanium were mostly not used as active released ingredients in AMCs, but rather as carriers for other release-based antimicrobial ingredients (e.g., conventional antibiotics). While minimizing the prevalence of healthcare-associated infections appeared to be the most prosperous field of AMCs application, the release of environmentally hazardous ingredients of AMCs into hospital wastewaters and thus, also the environmental risks associated with AMCs, comprise currently only a fraction of the release and risks of traditional disinfectants. However, being proactive, while the use of antimicrobial/antifouling coatings could currently pose ecotoxicological effects mainly in marine applications, the broad use of AMCs in other applications like medicine, food packaging and textiles should be postponed until reaching evidences on the (i) profound efficiency of these materials in controlling the spread of pathogenic microbes and (ii) safety of AMCs for the human and ecosystems.

Perspective on Plasma Polymers for Applied Biomaterials Nanoengineering and the Recent Rise of Oxazolines

Plasma polymers are unconventional organic thin films which only partially share the properties traditionally attributed to polymeric materials. For instance, they do not consist of repeating monomer units but rather present a highly crosslinked structure resembling the chemistry of the precursor used for deposition. Due to the complex nature of the deposition process, plasma polymers have historically been produced with little control over the chemistry of the plasma phase which is still poorly understood. Yet, plasma polymer research is thriving, in par with the commercialisation of innumerable products using this technology, in fields ranging from biomedical to green energy industries. Here, we briefly summarise the principles at the basis of plasma deposition and highlight recent progress made in understanding the unique chemistry and reactivity of these films. We then demonstrate how carefully designed plasma polymer films can serve the purpose of fundamental research and biomedical applications. We finish the review with a focus on a relatively new class of plasma polymers which are derived from oxazoline-based precursors. This type of coating has attracted significant attention recently due to its unique properties.

Fabrication of enzyme-responsive composite coating for the design of antibacterial surface

In this study, a type of bacteria enzyme-triggered antibacterial surface with a controlled release of Ag ions was developed. Firstly, chitosan-silver nanocomposites (Chi@Ag NPs) were in situ synthesized via using ascorbic acid as reducing agent. Chi@Ag NPs were characterized by transmission electron microscopy, ultraviolet-visible spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. Subsequently, Chi@Ag NPs and hyaluronic acid (HA) were used to fabricate antibacterial composite coating via Layer-by-Layer (LBL) self-assembly method. The successful construction of Chi@Ag NPs/HA composite coating was confirmed by scanning electron microscopy, energy dispersive spectroscopy and contact angle measurements, respectively. Then, the amount of released Ag ion was analyzed by inductively coupled plasma atomic emission spectrometry, which demonstrated that the release of Ag ions from the surface could be triggered by enzyme (e.g. hyaluronidase). A series of antibacterial tests in vitro, including zone of inhibition test, bacterial viability assay, antibacterial rate measurement and bacteria adhesion observation, demonstrated that the enzyme-responsive surface could inhibit the growth of bacteria. On the whole, this study provides an alternative approach for the fabrication of antibacterial surfaces on synthetic materials in various fields with the minimal side effects on surrounding environment and human body.

The Impact of Metallic Nanoparticles on Stem Cell Proliferation and Differentiation

Nanotechnology has a wide range of medical and industrial applications. The impact of metallic nanoparticles (NPs) on the proliferation and differentiation of normal, cancer, and stem cells is well-studied. The preparation of NPs, along with their physicochemical properties, is related to their biological function. Interestingly, various mechanisms are implicated in metallic NP-induced cellular proliferation and differentiation, such as modulation of signaling pathways, generation of reactive oxygen species, and regulation of various transcription factors. In this review, we will shed light on the biomedical application of metallic NPs and the interaction between NPs and the cellular components. The in vitro and in vivo influence of metallic NPs on stem cell differentiation and proliferation, as well as the mechanisms behind potential toxicity, will be explored. A better understanding of the limitations related to the application of metallic NPs on stem cell proliferation and differentiation will afford clues for optimal design and preparation of metallic NPs for the modulation of stem cell functions and for clinical application in regenerative medicine.

Silver Nanoparticles: Two-Faced Neuronal Differentiation-Inducing Material in Neuroblastoma (SH-SY5Y) Cells

We have previously demonstrated the potential of biologically synthesized silver nanoparticles (AgNP) in the induction of neuronal differentiation of human neuroblastoma, SH-SY5Y cells; we aimed herein to unveil its molecular mechanism in comparison to the well-known neuronal differentiation-inducing agent, all-trans-retinoic acid (RA). AgNP-treated SH-SY5Y cells showed significantly higher reactive oxygen species (ROS) generation, stronger mitochondrial membrane depolarization, lower dual-specificity phosphatase expression, higher extracellular-signal-regulated kinase (ERK) phosphorylation, lower AKT phosphorylation, and lower expression of the genes encoding the antioxidant enzymes than RA-treated cells. Notably, pretreatment with N-acetyl-l-cysteine significantly abolished AgNP-induced neuronal differentiation, but not in that induced by RA. ERK inhibition, but not AKT inhibition, suppresses neurite growth that is induced by AgNP. Taken together, our results uncover the pivotal contribution of ROS in the AgNP-induced neuronal differentiation mechanism, which is different from that of RA. However, the negative consequence of AgNP-induced neurite growth may be high ROS generation and the downregulation of the expression of the genes encoding the antioxidant enzymes, which prompts the future consideration and an in-depth study of the application of AgNP-differentiated cells in neurodegenerative disease therapy.

Silver nanoparticle modified surfaces induce differentiation of mouse kidney-derived stem cells

In this paper, we interrogate the influence of silver nanoparticle (AgNPs)-based model surfaces on mouse kidney-derived stem cells (mKSCs) differentiation. The widespread use of silver in biomedical and consumer products requires understanding of this element's effect on kidney cells. Moreover, the potential for using stem cells in drug discovery require methods to direct their differentiation to specialized cells. Hence, we generated coated model substrates containing different concentrations of surface immobilized AgNPs, and used them to evaluate properties and functions of mKSCs. Initially, mKSCs exhibited reduced viability on higher silver containing surfaces. However, longer culture periods assisted mKSCs to recover. Greater degree of cell spreading and arborization led by AgNPs, suggest podocyte differentiation. Proximal tubule cell marker's expression revealed differentiation to the specific lineage. Although the exact mechanism underpinning these findings require significant future efforts, this study demonstrate silver's capacity to stimulate mKSC differentiation, which may provide opportunities for drug screenings.

2-Methyl-2-oxazoline plasma polymerized silver nanoparticles containing coatings are not toxic towards mouse kidney derived stem cells (mKSCs) and regulate mKSCs differentiation.

The negative effect of silica nanoparticles on adipogenic differentiation of human mesenchymal stem cells

Nanoparticles have drawn much attention for a wide variety of applications in biomedical and bioengineering fields. The combined use of nanoparticles and human mesenchymal stem cells (hMSCs) in tissue engineering and regenerative medicine requires more knowledge of the influence of nanoparticles on cell viability and differentiation potential of hMSCs. The objective of this study is to investigate the in vitro uptake of silica nanoparticles (silica NPs) and their effect on adipogenic differentiation of hMSCs. After exposure of hMSCs to silica NPs, the uptake and localization of silica NPs were assessed using transmission electron microscopy (TEM) and confocal laser scanning microscopy (CLSM). The adipogenic differentiation potential of hMSCs was examined by analyzing the formation and accumulation of lipids droplets, triglyceride (TG) content and the expression of adipogenic marker genes/proteins. The results showed that silica NPs did not affect the cell viability but significantly decreased the differentiation of hMSCs to adipocytes. These findings improve the understanding of the influence of silica NPs on adipogenic differentiation of hMSCs and will provide a reference for the applications of silica NPs in biomedical and bioengineering fields.

Controlling enzymatic activity by immobilization on graphene oxide

In this study, graphene oxide (GO) has been applied as a matrix for enzyme immobilization. The protein adsorption capacity of GO is much higher than of other large surface area carbonaceous materials. Its structure and physicochemical properties are reported beneficial also for enzymatic activity modifications. The experimental proof was done here that GO-based biocatalytic systems with immobilized catalase are modifiable in terms of catalyzed reaction kinetic constants. It was found that activity and stability of catalase, considered here as model enzyme, closely depend on enzyme/GO ratio. The changes in kinetic parameters can be related to secondary structure alterations. The correlation between enzyme/GO ratio and kinetic and structure parameters is reported for the first time and enables the conscious control of biocatalytic processes and their extended applications. The biological activity of obtained biocatalytic systems was confirmed in vitro by the use of functional test. The addition of immobilized catalase improved the cells' viability after they were exposed to hydrogen peroxide and tert-butyl-hydroperoxide used as source of reactive oxygen species.

The Role of Reactive Oxygen Species (ROS) in the Biological Activities of Metallic Nanoparticles

Nanoparticles (NPs) possess unique physical and chemical properties that make them appropriate for various applications. The structural alteration of metallic NPs leads to different biological functions, specifically resulting in different potentials for the generation of reactive oxygen species (ROS). The amount of ROS produced by metallic NPs correlates with particle size, shape, surface area, and chemistry. ROS possess multiple functions in cellular biology, with ROS generation a key factor in metallic NP-induced toxicity, as well as modulation of cellular signaling involved in cell death, proliferation, and differentiation. In this review, we briefly explained NP classes and their biomedical applications and describe the sources and roles of ROS in NP-related biological functions in vitro and in vivo. Furthermore, we also described the roles of metal NP-induced ROS generation in stem cell biology. Although the roles of ROS in metallic NP-related biological functions requires further investigation, modulation and characterization of metallic NP-induced ROS production are promising in the application of metallic NPs in the areas of regenerative medicine and medical devices.

Sub-10 nm gold nanoparticles promote adipogenesis and inhibit osteogenesis of mesenchymal stem cells

Sub-10 nm Au NPs with an average size of 4 nm (Au4-mPEG NPs) had a promotive effect on the adipogenic differentiation and an inhibitive effect on the osteogenic differentiation of human bone marrow-derived mesenchymal stem cells (hMSCs) due to the highly induced ROS level.

The stimulatory effect of silica nanoparticles on osteogenic differentiation of human mesenchymal stem cells

Silica-based materials with favourable biocompatibility are generally considered as excellent candidates for applications in biomedical fields. However, previous researches mainly focused on the safety of silica-based materials, their effects on osteogenic differentiation of human mesenchymal stem cells (hMSCs) still need further investigations. In this study, core-shell fluorescent silica nanoparticles (silica NPs) with three different sizes (S1 ~ 50 nm, S2 ~ 200 nm, S3 ~ 400 nm, respectively) were prepared according to the Stöber method. The silica NPs with different sizes did not affect the cell viability (even up to a concentration of 500 µg ml^-1), showing size- and dose-independent cytocompatibility of silica NPs on hMSCs. Uptake of silica NPs significantly enhanced the activity of alkaline phosphatase (ALP) and the formation of bone-like nodules of hMSCs after osteogenic induction. At the concentration of 10 µg ml^-1, after treating hMSCs with larger sized silica NPs (S2 and S3), higher ALP activity of hMSCs was measured and larger sized bone-like nodules were formed by hMSCs compared with that treated with smaller sized silica NPs (S1).The enhanced osteogenic potential of hMSCs treated with silica NPs may be attributed to the Si released from silica NPs due to the lysosomal degradation inside hMSCs. These results demonstrate the stimulatory effect of silica NPs on osteogenic differentiation of hMSCs and the application potential of silica NPs in bone tissue engineering.