Stability of Plasmonic Mg-MgO Core-Shell Nanoparticles in Gas-Phase Oxidative Environments

Magnesium is a recent addition to the plasmonic toolbox: nanomaterials that efficiently utilize photons' energy due to their ability to sustain localized surface plasmon resonances. Magnesium nanoparticles protected by a native oxide shell can efficiently absorb light across the solar spectrum, making them a promising photocatalytic material. However, their inherent reactivity toward oxidation may limit the number of reactions in which Mg-MgO can be used. Here, we investigate the stability of plasmonic Mg-MgO core-shell nanoplates under oxidative conditions. We demonstrate that the MgO shell stabilizes the metallic Mg core against oxidation in air at up to 400 °C. Furthermore, we show that the reactivity of Mg-MgO nanoplates with water vapor (3.5 vol % in N2) decreases with temperature, with no oxidation of the Mg core detected from 200 to 400 °C. This work unravels the potential of Mg-MgO nanoparticles for a broad range of catalytic transformations occurring in oxidative environments.

Plasmonic Magnesium Nanoparticles Are Efficient Nanoheaters

Understanding and guiding light at the nanoscale can significantly impact society, for instance, by facilitating the development of efficient, sustainable, and/or cost-effective technologies. One emergent branch of nanotechnology exploits the conversion of light into heat, where heat is subsequently harnessed for various applications including therapeutics, heat-driven chemistries, and solar heating. Gold nanoparticles are overwhelmingly the most common material for plasmon-assisted photothermal applications; yet magnesium nanoparticles present a compelling alternative due to their low cost and superior biocompatibility. Herein, we measured the heat generated and quantified the photothermal efficiency of the gold and magnesium nanoparticle suspensions. Photothermal transduction experiments and optical and thermal simulations of different sizes and shapes of gold and magnesium nanoparticles showed that magnesium is more efficient at converting light into heat compared to gold at near-infrared wavelengths, thus demonstrating that magnesium nanoparticles are a promising new class of inexpensive, biodegradable photothermal platforms.

In vitro corrosion resistance and dual antibacterial ability of curcumin loaded composite coatings on AZ31 alloy: Effect of amorphous calcium carbonate

Rapid corrosion and bacterial infection are obstacles to put into use biodegradable magnesium (Mg) alloy as biomedical materials. In this research, an amorphous calcium carbonate (ACC)@curcumin (Cur) loaded poly-methyltrimethoxysilane (PMTMS) coating prepared by self-assembly method on micro-arc oxidation (MAO) coated Mg alloy has been proposed. Scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy are adopted to analyze the morphology and composition of the obtained coatings. The corrosion behaviour of the coatings is estimated by hydrogen evolution and electrochemical tests. The spread plate method without or with 808 nm near-infrared irradiation is applied to evaluate the antimicrobial and photothermal antimicrobial ability of the coatings. Cytotoxicity of the samples is tested by 3-(4,5)-dimethylthiahiazo(-z-y1)-2,5-di- phenytetrazoliumromide (MTT) and live/dead assay culturing with MC3T3-E1 cells. Results show that the MAO/ACC@Cur-PMTMS coating exhibited favourable corrosion resistance, dual antibacterial ability, and good biocompatibility. Cur was employed as an antibacterial agent and photosensitizer for photothermal therapy. The core of ACC significantly improved the loading of Cur and the deposition of hydroxyapatite corrosion products during degradation, which greatly promoted the long-term corrosion resistance and antibacterial activity of Mg alloys as biomedical materials.

Scalable Superabsorbers and Color Filters Based on Earth-Abundant Materials

Optical materials based on unconventional plasmonic metals (e.g., magnesium) have lately driven rising research interest for the quest of possibilities in nanophotonic applications. Several favorable attributes of Mg, such as earth abundancy, lightweight, biocompatibility/biodegradability, and its active reactions with water or hydrogen, have underpinned its emergence as an alternative nanophotonic material. Here, we experimentally demonstrate a thin film-based optical device composed exclusively of earth-abundant and complementary metal-oxide semiconductor (CMOS)-compatible materials (i.e., Mg, a-Si, and SiO₂). The devices can exhibit a spectrally selective and tunable near-unity resonant absorption with an ultrathin a-Si absorbing layer due to the strong interference effect in this high-index and lossy film. Alternatively, they can generate diverse reflective colors by appropriate tuning of the a-Si and SiO₂ layer thicknesses, including all the primary colors for RGB (red, green, blue) and CMY (cyan, magenta, yellow) color spaces. In addition, the reflective hues of the devices can be notably altered in a zero power-consumption fashion by immersing them in water due to the resulted dissolution of the Mg back-reflection layer. These compelling features in combination with the lithography-free and scalable fabrication steps may promise their adoption in various photonic applications including solar energy harvesting, optical information security, optical modulation, and filtering as well as structure reuse and recycling.

Opportunities and Challenges for Alternative Nanoplasmonic Metals: Magnesium and Beyond

Materials that sustain localized surface plasmon resonances have a broad technology potential as attractive platforms for surface-enhanced spectroscopies, chemical and biological sensing, light-driven catalysis, hyperthermal cancer therapy, waveguides, and so on. Most plasmonic nanoparticles studied to date are composed of either Ag or Au, for which a vast array of synthetic approaches are available, leading to controllable size and shape. However, recently, alternative materials capable of generating plasmonically enhanced light-matter interactions have gained prominence, notably Cu, Al, In, and Mg. In this Perspective, we give an overview of the attributes of plasmonic nanostructures that lead to their potential use and how their performance is dictated by the choice of plasmonic material, emphasizing the similarities and differences between traditional and emerging plasmonic compositions. First, we discuss the materials limitation encapsulated by the dielectric function. Then, we evaluate how size and shape maneuver localized surface plasmon resonance (LSPR) energy and field distribution and address how this impacts applications. Next, biocompatibility, reactivity, and cost, all key differences underlying the potential of non-noble metals, are highlighted. We find that metals beyond Ag and Au are of competitive plasmonic quality. We argue that by thinking outside of the box, i.e., by looking at nonconventional materials such as Mg, one can broaden the frequency range and, more importantly, combine the plasmonic response with other properties essential for the implementation of plasmonic technologies.

Size Control in the Colloidal Synthesis of Plasmonic Magnesium Nanoparticles

Nanoparticles of plasmonic materials can sustain oscillations of their free electron density, called localized surface plasmon resonances (LSPRs), giving them a broad range of potential applications. Mg is an earth-abundant plasmonic material attracting growing attention owing to its ability to sustain LSPRs across the ultraviolet, visible, and near-infrared wavelength range. Tuning the LSPR frequency of plasmonic nanoparticles requires precise control over their size and shape; for Mg, this control has previously been achieved using top-down fabrication or gas-phase methods, but these are slow and expensive. Here, we systematically probe the effects of reaction parameters on the nucleation and growth of Mg nanoparticles using a facile and inexpensive colloidal synthesis. Small NPs of 80 nm were synthesized using a low reaction time of 1 min and ∼100 nm NPs were synthesized by decreasing the overall reaction concentration, replacing the naphthalene electron carrier with biphenyl or using metal salt additives of FeCl3 or NiCl2 at longer reaction times of 17 h. Intermediate sizes up to 400 nm were further selected via the overall reaction concentration or using other metal salt additives with different reduction potentials. Significantly larger particles of over a micrometer were produced by reducing the reaction temperature and, thus, the nucleation rate. We showed that increasing the solvent coordination reduced Mg NP sizes, while scaling up the reaction reduced the mixing efficiency and produced larger NPs. Surprisingly, varying the relative amounts of Mg precursor and electron carrier had little impact on the final NP sizes. These results pave the way for the large-scale use of Mg as a low-cost and sustainable plasmonic material.

Micro-/Nano-Structures on Biodegradable Magnesium@PLGA and Their Cytotoxicity, Photothermal, and Anti-Tumor Effects

The size and structural control of particulate carriers for imaging agents and therapeutics are constant themes in designing smart delivery systems. This is motivated by the causal relationship between geometric parameters and functionalities of delivery vehicles. Here, both in vitro and in vivo, the controlling factors for cytotoxicity, photothermal, and anti-tumor effects of biodegradable magnesium@poly(lactic-co-glycolic acid (Mg@PLGA) particulate carriers with different sizes and shell thicknesses are investigated. Mg@PLGA microspheres fabricated by microfluidic emulsification are shown to have higher Mg encapsulation efficiency, 87%, than nanospheres by ultrasonic homogenization, 50%. The photothermal and anti-tumor effects of Mg@PLGA spheres are found to be dictated by their Mg content, irrelevant to size and structural features, as demonstrated in both in vitro cell assays and in vivo mice models. These results also provide important implications for designing and fabricating stimuli-responsive drug delivery vehicles.

Shapes, Plasmonic Properties, and Reactivity of Magnesium Nanoparticles

Localized surface plasmon resonances have attracted much attention due to their ability to enhance light-matter interactions and manipulate light at the subwavelength level. Recently, alternatives to the rare and expensive noble metals Ag and Au have been sought for more sustainable and large-scale plasmonic utilization. Mg supports plasmon resonances, is one of the most abundant elements in earth's crust, and is fully biocompatible, making it an attractive framework for plasmonics. This feature article first reports the hexagonal, folded, and kite-like shapes expected theoretically from a modified Wulff construction for single crystal and twinned Mg structures and describes their excellent match with experimental results. Then, the optical response of Mg nanoparticles is overviewed, highlighting Mg's ability to sustain localized surface plasmon resonances across the ultraviolet, visible, and near-infrared electromagnetic ranges. The various resonant modes of hexagons, leading to the highly localized electric field characteristic of plasmonic behavior, are presented numerically and experimentally. The evolution of these modes and the associated field from hexagons to the lower symmetry folded structures is then probed, again by matching simulations, optical, and electron spectroscopy data. Lastly, results demonstrating the opportunities and challenges related to the high chemical reactivity of Mg are discussed, including surface oxide formation and galvanic replacement as a synthetic tool for bimetallics. This Feature Article concludes with a summary of the next steps, open questions, and future directions in the field of Mg nanoplasmonics.

Se@SiO2-FA-CuS nanocomposites for targeted delivery of DOX and nano selenium in synergistic combination of chemo-photothermal therapy

In this study, a versatile tumor-targeted and multi-stimuli-responsive drug delivery vehicle (Se particle@porous silica-folic acid-copper sulfide/doxorubicin (Se@SiO₂-FA-CuS/DOX)) was fabricated for combined photothermal therapy with chemotherapy in cancer treatment. Due to excellent targeting ability, the Se@SiO₂-FA-CuS/DOX nanocomposites actively accumulated in tumor tissues and thus provided photothermal therapy under NIR irradiation and chemotherapy through the release of DOX and Se. Owing to the synergistic effect of chemotherapy (Se and DOX) and photothermal therapy, the Se@SiO₂-FA-CuS/DOX nanocomposites could efficiently inhibit cancer cells both in vitro and in vivo and even completely eliminate tumors. Moreover, as the toxicity of DOX could be reduced by Se, the treatment using Se@SiO₂-FA-CuS/DOX nanocomposites exhibited no appreciable adverse reactions. Thus, the Se@SiO₂-FA-CuS/DOX nanocomposites have great potential as a multifunctional nanoplatform in future clinical applications.

Multifunctional PS@CS@Au–Fe3O4–FA nanocomposites for CT, MR and fluorescence imaging guided targeted-photothermal therapy of cancer cells

Multifunctional theranostic PS@CS@Au–Fe₃O₄–FA/ICG nanocomposites for MR, CT and fluorescence multiple-modal imaging-guided targeted photothermal therapy were fabricated, and they might be a promising theranostic nanoplatform for tumor diagnostics and treatment.